Professional Documents
Culture Documents
P6-U06V100R001C00B512
SD Card Software Upgrade Guideline
Contents
1 Upgrade Attention
Please ensure that the phone is Huawei original version before upgrading, no other
online unofficial version upgrade, otherwise, the upgrade progress maybe have risk to fail
The software is only available for P6-U06 mobile phone hardware, if you upgrade this
software on other phone models, this phone maybe not able to boot.
The upgrade process will wipe out the user data, if there is some important data, it is
To make sure that the power of the battery is enough to run the upgrade process.
Maybe you can connect the handset with the charger or the USB data cable to provide
power.
2 Version introduction
P6-U06V100R001C00B100
P6-U06V100R001C00B101
P6-U06V100R001C00B102
P6-U06V100R001C00B103
P6-U06V100R001C00B104
P6-U06V100R001C00B105
P6-U06V100R001C00B106
P6-U06V100R001C00B107
P6-U06V100R001C00B108
P6-U06V100R001C00B109
P6-U06V100R001C00B110
P6-U06V100R001C00B121
P6-U06V100R001C00B122
P6-U06V100R001C00B124
P6-U06V100R001C00B125
P6-U06V100R001C00B132
The P6-U06 handset software should be updated with the MICRO SD card
File Name
3 Upgrade preparation
Make sure that the MICRO SD card is available and can be read and write.
According to the chapter 2.3, check the software package date and the file size.
4 Upgrade introduction
There are two methods to upgrade: normal upgrade and force upgrade.
5 Upgrade operations
Step 1. A MICRO SD card of 2GB or more should be available. The MICRO SD card
Step 3. Copy the entire dload folder (\Software\dload, with UPDATE.APP in it) to the root
Step 4. Insert the MICRO SD card into the handset and power on. After entering the
Step 5. Then enter the Software Upgrade Mode. Reference to the following pictures.
Step 3. Copy the entire dload folder (\Software\dload, with UPDATE.APP in it) to the root
Step 4. Make sure your handset is power off. Insert the MICRO SD card into the handset.
Press the VOLUME UP and VOLUME DOWN key, and then press the POWER key
to power on the phone, and VOLUME UP key and VOLUME DOWN key should be
pressed more than 10 seconds, then enter the Software Upgrade Mode.
6 Upgrade validate
By Settings->About phone->Build number, to check the version, just like the pictures
below:
Version is P6-U06V100R001C00B512