Professional Documents
Culture Documents
Advertisment
Some of the above settings seem to conflict with those in Easily calculate:
ConnectCNC;
but the control counts the even parity bit as a data bit. Speeds and feeds
trigonomerty
thread
To set the CNC up for drip feed: measurement
surface finish
Windows programs, including ConnectCNC, cannot drip feed to this
control. and more...
Send Settings
Header
0
String
Trailer 0
http://www.connectcnc-dnc.com/Settings/CincinnatiAcramatic850.html 1/3
28/2/2018 Cincinnati Acramatic 850 G-code file transfer or DNC
String
End of Line Sequence
Recognize
custom
EOL
Replace
Receive Settings
Header
String
Trailer
String
End of Line Sequence
Recognize
custom
EOL
Replace
13,10
(checked)
http://www.connectcnc-dnc.com/Settings/CincinnatiAcramatic850.html 2/3
28/2/2018 Cincinnati Acramatic 850 G-code file transfer or DNC
Sometimes file transfer will not run, even if all the settings are correct. Go to this page for solutions.
Once you have ConnectCNC and your CNC machines communicating, we strongly suggest you take the following precautions:
- Download some programs, the longer the better, from your CNC to the pc. Save them under a temporary filename so you
don't overwrite the original files. Examine them for errors such as dropped or changed text.
Do this for the first few programs that you use.
These settings have been collected from users of our software and machine tool distributers. We have listed them to help users
of ConnectCNC to communicate between their computers and CNC controls.
Since we have no control over the many variables involved, including such things as cable conditions, modifications to
machines, condition of computer hardware, etc., we take no responsibility for any damage caused to programs or machines
through the use of this software.
http://www.connectcnc-dnc.com/Settings/CincinnatiAcramatic850.html 3/3