Professional Documents
Culture Documents
Warning
EC99J2044
Specifications, designs and other content appearing in this brochure are current as of April 201 1 but subject to change without notice.
.
DAlKlN AlRCONDlTlONING INDIA PW. LTD.
12th Floor, Building No. 9,Tower A, DLF Cyber City, DLF Phase Ill, Gurgaon - 122 002,Haryana, India.
Tel.: 0124-4555444,Fax.: 0124-4555333,e-mail: ho@daikinindia.com
Chandigarh - Tel.: 01 72-5089862-64 Lucknow - Tel.: 0522-278730713401291 1800 - 102 - 9300,1800 - 22- 9300
kcallh 9 950-
CEILING MOUNTED
2x2 CASSEITE TYPE
C/O FFQ25BVlB9 I FFQ35BVlB9 I FFQ5OBVlB9 I FFQGOBVlB9 I
(FFQ) (C/O & HIP)
--
/
%
1-( Specifications Page 54 HP
I FFQP5BVl ~g FFQ35BVl B9 FFQ50BV1B9 FFQGOBVIB9 1
ROUND FLOW c/o FCQ71KVEA FCQl OOKVEA FCQ125KVEA FCQl40KVEA
CASSEllE 1-
(FCQ) (C/O & HIP)
n /-=--,
1 I
[ p a g e ) Specifications Page 55
CEILING SUSPENDED
TYPE
HIP
I FHQ35BWlB I FHQSOBWIB I FHQGOBVVIB I
FCQ71KVEA
FHQ71BWlB
I I AQI~~BWIB
FCQl OOKVEA
FHQlOOBWlBI
FCQI 25KVEA FCQl40KVEA
I
(Cooling only)
FHYC35-140LU
celllna mounted Cooling only Heat pump
Diffuser
LCD Wired
Multi-Flow System
remote controller
BRC1C61
3-way blow
,*, Air direction can be selected according to installation.
.'"denotes piping direction.
" " d e n o t e s sealing member of
air discharge outlet (option).
LCD Wireless
remote controller
A signal receiver must be
added to the indoor unit.
t 2-way blow
3 pattern +ET
Note: For 3-way or 2-way flow installation, the sealing member of air discharge outlet (option)
must be used to close off the unused outlet(s).
Note: Running noise increases when
using 2-way or 3-way blow.
Optimal comfort and convenience assured by 3 air discharge modes Installable on high ceilings
Setting to prevent
Air direction Drafl prevention setting Standard setting Criteria for ceiling height and number o f blow
soiling of celling outlets.
Note: Wireless remote Desired When drafts are unwanted For gentle drafts When ceiling must
controller and signal receiver situation humoer d air discnarge o ~ t e t sbseo
(Ceiling is stained) be kept spotless
II 30NU-48NU
""4213
unit are sold as a set. 18N"-26NU
6 6 ~ ( ~ ,
Features
High LOW
+ +
setting levels between levels between levels between
100 and 400 100 and 65O 300 and 65O
Draft prevention
(in heating mode) ~tm i n g startupand t h o OFF, air dhsrge
is aumaticallyset At hwtiw m p a n d U ~ e m O i P air
. diharge k automaWh/set up 3W
to 8 ne8r Mm$l lU to w n t diredewmretoaal air drafts. to prevent bdh direct ex&mure to CMI air d n n t s d wntact ceilings.
blow The last blow direction is saved in memory and automatically set the next time
Note: Units are set to standard ceiling height and 4-way
the unit is turned ON. (Initial setting is 3O"for cooling)
"Applicable when wired remote controller is used
direction control
9
Note: Blow direction is set to the standard position when the unit is shipped from the factory. The position can be changed
blow when shipped from the factory. High ceiling
@ and are set from the remote controller.
'2Applicable to R(Y)71-140outdoor units
from the remote controller.
Two selectable temperature - sensors r alscnarge alsrrlDurlon comparison
Both indoor unit and wired remote controller (option) contain temperature-sensors. Temperature , Suoer Cassette
8--
kmj
sensing can be set at the unit or, to further improve comfort level, closer to the target area at the wired ) Conventionalmodel
remote control.
'Temperature-sensoron indoor unit must be used when the air conditioner is controlled fmm another mom.
Wireless remote controller does not have a temperature-sensor.
A newly shaped air discharge opening increases flow without increasing wind speed, hence
discharged air reaches farther than before.
Programme "Dry"
Dehumidification is microprocessor controlled to prevent abrupt and uncomfortable changes in air temperature.
FUY71-125
ceiling suspended I /Ira-thin, quiet design made possible by the new Flat Turbo Fan.
Note: When 2-way or 3-way blow installation is selected, the unused blow outlet@)must be closed off, using the Provided with high lift drain water lift-up
sealing rnatelial pmvided as a standard accessory. This will raise the operation noise by about 2dB. mechanism as standard equipment
BRC7C529W
Light receptor unit II \ I
Standard I
2-way blow
3.5m
Number of blow outlets used
I
I
3-way blow
3.0m
I
I
4-way blow
2.7m I 90" rotating air intake grille
Ceiling High Ceiling 6) 3.8m 3.3m 3.0m Note: The panel cannot be turned when the
wireless remote controller is in use.
height
Light receptor unit - Ceilinn- 0
Hinh - 3.5m 3.5m
I I I I I
Note: Units are set to standard ceiling height and 4-way blow when shipped from the factory. High ceiling
O and O are set from the remote controller.
Indust~y-topclass noise attenuation
4013568
High Low Two Select thermo-sensors
Features FUWl FJ Thermo-sensors on both indoor unit and wired remote controller (optional). Temperature detection can be set closer to the living area to further improve
..*I-
Switchable fan speed: High / Low
Model W
a
from 10" to 70" between 1ODto 70' cooling and 70" for heating)
FAY1OOFAVE
wall mounted Comfort even on the far side of the room
Sophisticated extension design TO carry air to the far side of long rooms, extra-high air blow
(Cooling only) adds 10% more fan speed to the "high" setting. Air blow
Compact and stylish design that does not detract from the
strength is selected from the remote controller.
decor of the room.
Top class in the industry for compactness and silence.
Wall mounted air conditioners demand this kind of performance. Flap is closed when not operating Two selectable thermo-sensors
Both indoor unit and wired remote controller (option) contain thermo-sensors. Temperature
detection can be set at the unit or, to further improve comfort level, closer to the target
Easier to install and service area at the wired remote control.
Accessory required for indoor unit Lightweight Thermo-sensor on indoor unit must be used when the air conditioner is controlled from another room.
Programme "Dry"
Conventional ,.2w model Dehumidification is computer controlled to prevent abrupt and uncomfortable changes in
air temperature.
21Kg I, 13Kg
BRClC61 Switchable fan speed: High/Low
zm!
FAY100
. -
FH21NU-48NU
(Cooling only)
FHY35BVE-125BVE
ceiling suspended I Programme "Dry"
Dehumidification is microprocessor
controlled to prevent abrupt and
uncomfortable changes in air temperature.
49
Note : Anechoic chamber conversion value, measured
according to JIS parameters and criteria.
(Heat Pump)
43
dB(A)
(Heat Pump) Air is blown up to 50" in Indoor unit I High Low
the downward direction. 35B I 37 32
(Cooling Only)
Accessory required for indoor unit Note : Anechoic chamber conversion value,
Installation flexibility for freedom of design measured according to JIS parameters and criteria.
LCD Wired
Uses quiet stream fan
remote controller Uniform height and depth. All wiring and internal and other auiet
BRCI NU61 Compact design for small- servicing done from below
Note: Remote controller cable not included. capacity models to meet tighter the unit
Cables must be procured locally. dimensional constraints.
E
I I
option
I
1
Model
Coolina onlv
IHeatpump
I
10
-
..---- *2 *4
.I.
@I@
.
@ I s
I '1
-
-
8
-
@
-
'
-
6
I
0
.
0 0
-
@
-
@
- -
@
-
0
I
0
.
0
I
0
I
@ @
'llnstallable on max. 3.5 m high ceiling "Applicable to R W l LU-RYl40LU outdoor units (for temp. down tw5"C)
*2Applicablewhen wired remote controller is used and RY200LU-RY250LU outdoor units (for temp. down to 4 ° C )
'SApplicableto R71LU-R140LU outdoor units (for temp. down to -1 5 "C) 'SOptional available
High Low (An option is required.) '=Applicable to RM71LU-140LU outdoor units
FH36NU (220v)
Flexibly adapts to shop interiors Meets a diversity of installation needs
The air discharge unit can be separated from the The indoor unit can be installed in rooms with as
actual air conditioner for use in L or U-shaped little as 35 cm between the drop ceiling and ceiling
rooms. In this way, the unit clears all sorts of slab. It also works with both flexible and ordinary
conditions placed on airconditioning because of ducts.
lighting or human behavior, keeping even
irregularly-shaped rooms comfortable in the
process. In crawl space With canvas belows and air intakepanel (sold separately)
FHYB71-125 +shaped room 4-shaped room .Long room With High-efficiencyFilter Ceiling return
4113561
High Low
F M 7 1F
Features I Air discharge opening adapter I
--....-. . prevenrlDn Work & Servicing Control features Option Others
High-efficiencyfilter (option)
Available in two types: 65% and 90% colorimetry. This filter
c
u easily clears dust collection efficiency regulations specified
E: in building codes.
Options have also been upgraded to make
installation even easier.
Branch duct
I and air intake panel I
Cooling only - -1 • • 2 . 2 . . 0 - • • • • • • • •
"'Applicable to R71-R125 obtaoor un'rs (for temp. down ro -15OC) (An option is required.)
"ZApplicableto R(Y)71-125 obtdoor un'ts
Compact
Small, lightweight, and easy-to-install outdoor unit.
\ I
I
Suction chamber
Air filter
[Duct connection]
FDB25-71 KVE
duct connection Durable
*To prevent increased operation sound, avoid installing the air suction grille
directly below the suction chamber.
FDYB35-60KAVE
low static ~ressure atmospheric pollution, coated PE tins (with special acryl pretreatment) are used
for the heat exchanger of the outdoor unit.
(Heat Pump)
Quiet operation
Ideal for quiet, beautiful living spaces (CoolingOnly) (220'4dB@) (Heat Pump) (220'4dB(4)
I I
FDB50KVE I FDYBGOKAVE 1 43 1 40 1
(a a. *
FDBGOKVE
FDB71KVE 40
Note:Anechoic chamber conversionvalue.
measured accordingto JIS parameters and criteria.
Digital remote Remote
controller controller
1 hrrr 1
High Low
..
FDBG26NU (22W
Cooling only 0 - - - - - - - - - - 0 - - - - - - •
Heat pump o o o o - 1 ~ - 2 -2- • • • • • • • • • • •
Switchable fan speed: High/Middle/Low
Drain pipe connection can be done inside the unit. Coolant and drain pipe outlets are at the same opening.
l
middle static
w ~ i rdischarge Air intakem
FDYM03FAVl-OGFAVI
(Heat Pump) pressure type Quiet operation
(Cooling only)
Door-installed Wall-installed
ventilation grille ventilation grille Under-door cutout
a* *
Wired LCD remote Wireless LCD remote
controller controller
Signal receiver unit
F
I
(Separate type)
Wireless remote
controller and
signal receiver unit
BRCI C61
are sold as a set. Ventilation grille Ventilation grille Under-door cutout
Note: The under-door cutout method should be used only when there is a small volume of airflow.
I
Note: Remote controller cable not
included. Cables must be
procured locally. When airconditioning two rooms simultaneously, the air discharged into each room must be circulated back to the air conditioner. To
achieve this, a ventilation duct should be installed for each room or one of the indicated ventilation grilles should be installed on the
partitioning wall or under the door between the rooms.
~ ~
High Low
FDMG36 (2MV)
Features
,
\ Feature Comfort Work & Servicing Control features I Others I
Cooling only
Heat pump . . . -
O p p p p p
2 .
I Cooling only / Heat pump cassette type If you raise the set temperature by 1 to 1.5OC, and velocity is decreased by
25%, you still obtain the same feeling temperature and comfort.
Uniform 360" airflow cassette air conditioner is setting Adapts easily to the installation space
tomorrow's standards. Because air flows out from corner outlets, comfort spreads more widely.
Wired LCD
All-round flow
- 3-way flow
2-way flow 2-wav flow
remote controller
-- 1
Note: Remote controller cable not
included. Cables must be
procured locally. (E.g., installed in (E.g., installed (E.g.,a installed
corner) in (E.g., installed in
middle of ceiling) near a wall) a long room)
BRC1D61 BRC1E61
Round Flow cassette
Note: Remote controller cable not included. Cables must be procured locally. Comfortable airflow
Features
Round Flow type
Mildew 360" airflow with improved
Feature :omfort o
n,n
tP
, Work & Servicing Control Features
I I I
I
I
temperature distribution.
6
.- -
+ c 6
Model
360" airflow gives uniform ~~
~~
1 1-------------
\
4-way flow leaves areas airflow distribution.
1 that cannot be covered. Greater comfort lmproved energy-saving
"Applicable when wired remote controller is used
26
Unified square panels Compact body and quiet operation Easier to maintain
Panels are the same size as the FCQ71-140. dB&) The condition of the drain pan and drain water can be checked by removing the drain plug and intake grille.
Maintains a neat appearancewhere multiple units are installed. Indoor unit High
-
situation
must be keot sootless. Options required for specific installation environments
a Auto-swing between
Ultra long-life filter Panel spacer
\/ 25'and 60' Note: *' 298mm high with 100-140
"303mm high with 100-140
Even in smoky environments where the air conditioner is on Use when only minimal space is available between drop ceilings and ceiling
most of the time, the ultra long-life filter only has to be slabs.
Blow direction
can be set to
5 levels
I
9 Settableto 5 diirent
levels between 15' and 60' I
I
Settable to 5 different
levels between 2P and 80' Easy height adjustment
Each corner of the unit has an A d j u s t e r Pocket that
changed once a year.
Smoky atmosphere: annual filter change
*For dust concentration of 0.3mg/m3 (Requires separately sold Air Cleaner.)
'wOm
Drafi prevention
(In heating mode)
n, At heating startup and thermo OFF, air dischar9e is
automatically set to a near horizontal 25' or 30 to prevent
lets YOU easily adjust the unit's suspended height. 1 year (Approx. 5,000hr) =I5 hr/day x 28 day/month x 12 month/year
In ordinary stores and offices, filter change every 4 years
direct exposure to cool air drafts. Note: If the wireless remote control option is installed, a light receptor unit
'For dust concentration of 0.15mg/m3
is housed in one of the adjuster pockets.
4 years (Approx. 10,000 hr) =8 hr/day x 25 day/month x 4 years
I-
I
Auto blow The last discharge direction is saved in memory and
automatically set the next time the unit is tumed ON.
Panel spacer
direction control
All models suspended without lift
w s i n g of the comer discharge outlets is recommended. High-efficiency filter
Note: Some ceiiing constructions may hinder installation.
Installed in any direction Available in two types: 65% and 90% colorimetry. Contact your Daikin Dealer before installing your unit.
Suitable for high ceilings
Since the orientation of the
Even in spaces with high ceilings, a comfortable airflow is carried down to the floor level. intake grill can be adjusted
after installing, the direction Fresh air intake kit O"'sid"ealing member of air discharge outlet
of the intake grill lines can be Using this kit, a duct can be fitted to
Criteria for ceiling height and number of air discharge outlets unified when multiple units increase the intake of outdoor air.
Sealing members block air discharge openings not used in 2-way or 3-way
blow.
are installed.
Note: "Connecting ducts, insect nets, fire dampers, air filters, and other parts should, as
required, be procured locally.
**Outside Air fan interlocked with airconditioning unit is necessary. Optional PCB
Branch duct (direct-connection round duct)
(KRPIC63) is required for interiocldng. A round duct can be attached without the need for a chamber.
""It is recommendedthat the volume of outdoor air introducedthrough the k t is
limited to 10% of the maximum aimow rate of the indoor unit. Introducing higher
A flanged port for direct connection of a round duct is provided. An
existing branch duct chamber can also be fitted (square slit hole).
Note: Factory settings are for standard ceiling height and all-round blow. High ceiling settings (I) and (2) are set Drain pump is equipped as standard quantities will increasethe operating noise and may also influencetemperature
with the remote controiier. sending.
accessory with 850mm lift.
Two selectable temperature-sensors
Both indoor unit and wired remote controller (option) contain temperature-sensors. The units can be installed in the following different ways.
Temperature sensing can be set at the unit or, to further improve comfort level, closer to
the target area at the wired remote control. This feature requires initial setting by the Chamber type (without T-joint pipe and fan) Chamber type (with T-joint pipe and without fan) Direct installation type
installer. Kt name: KDDP55K160 Kt name: KDDP55K160K Kt name: KDDP55X160
Temperature-sensoron indoor unit must be used when the air conditioner is controlledfrom another room.
Wireless remote controiier does not have a temperature-sensor.