Professional Documents
Culture Documents
The products:
VDE fastening tools 10 – 33
VDE pliers 34 – 43
VDE application sets 44 – 49
Application accessories 50 – 57
Wiha Inomic® VDE
slimBits –
VDE in detail 58 – 59
suitable for slimVario
and slimTorque VDE
torque system.
Award-winning
ergonomic and
ophisticated design
Optimum view
of the workpiece.
Safety and functionality
at the highest level.
3
Cable processing.
The application chain.
Inomic® VDE
The angled form and parallel motion
sequence are gentle on joints, tendons
and muscles
Diagonal cutters Professional electric Page 38 Stripping tool for round cables Page 43
Cable cutters Professional electric Page 38 Stripping knife for round cables Page 43
4
www.wiha.com
Stripping. Crimping.
Needle nose pliers Inomic® VDE Page 35 Crimp tools for wire-end sleeves Page 41 – 42
Inomic® VDE
The angled form and parallel motion
sequence are gentle on joints, tendons
and muscles
Stripping tool for coaxial cables Page 43 Crimping pliers for end sleeves Basic Page 40
5
Electrical installation.
The application chain.
TorqueVario®-S VDE torque screwdriver Page 13 – 14 SoftFinish® electric slimVario bit holder with slimBits Page 19 – 21
slimBits with slimTorque VDE bit holder Page 13 – 14 SoftFinish® electric slimFix screwdriver Page 23
slimTorque VDE
torque system –
Classic electric screwdriver Page 30
a fully-certified
VDE torque product line,
only available from Wiha.
Electrical switch components
have pre-defined torque specifications
VDE T-handle Page 31
specified by manufacturer
data sheets.
6
www.wiha.com
SoftFinish® electric slimFix screwdriver Page 23 Needle nose pliers Inomic® VDE Page 35
Inomic® VDE
The angled form and parallel motion
sequence are gentle on joints, tendons
SoftFinish® electric slimFix and muscles
Ideal VDE actuating tool
for spring clips:
no damage to clips thanks to Combination pliers Professional electric Page 37
optimised wedge form.
Wiha slimTECHNOLOGY Needle nose pliers Professional electric with cutting edge Page 37
Maximum safety
Blades up to 33%
narrower due to integrated
VDE application sets Page 44 – 49
insulation
Unimpeded accessibility
7
VDE application sets.
Tool set for electrician’s belt bag Page 44 Insulated ratchet box spanner set Page 49
Tool set for switch cabinet construction Page 46 Insulated L-key set Page 49
Tool set for service technicians Page 47 – 48 Insulated single-sided open-end spanner set Page 48
8
www.wiha.com
Application accessories.
Bitholders Page 54
9
Wiha slim family.
The innovation for VDE fastening tools.
SoftFinish® electric
slimFix
• Actuating tool for spring clips
(wedge-profiled output geometry)
• Effortless access to low-lying
fastening and spring elements
slimVario
Compact VDE bit sets:
holder + slimBit (length 90 mm)
• 35% lighter than comparable sets
• Maximum service life: 2.5 | 3.0 | 4.0 | 5.5 | 6.5
metal locking mechanism
PH1 | PH2
• Precise work – additional guidance
with free-running sleeve PZ1 | PZ2
SL/PH1 | SL/PH2
SL/PZ1 | SL/PZ2
Robertson 1 | 2
slimTorque
The world's only VDE torque screwdriver:
Controlled tightening of electrical screw
connections with slimBits
10
www.wiha.com
Blades up to 33 % • Unimpeded
accessibility
Plastic box narrower due to
• VDE and GS
integrated insulation. certified
• Maximum
safety
Bag
slimVario +
slimTorque
11
Wiha Torque VDE screwdrivers.
Precise and high repeat accuracy.
slimTECHNOLOGY
NEW
2872 TorqueVario®-S VDE torque screwdriver.
Insulation up to 1000 V AC, GS-mark.
Torque value can be set via window scale.
Automatic release.
Handle: Torque infinitely adjustable with Torque-Setter setting tool (also supplied).
Ergonomic multi-component handle, insulation up to 1000 V AC,
GS mark.
Handle sizes proportioned to optimise torque setting. NEW
Audible and perceptible click when the pre-set torque has been attained. 2879 B7 slimTorque kit, 7 pcs.
Bit holder: slimTorque VDE bit holder (included in delivery) for 6 mm slimBits. With slimTorque VDE bit holder for 6 mm slimBits.
Standards: Manufactured acc. to IEC 60900:2004. Bit holder: ClicFix quick release holder securely locks bits.
EN ISO 6798, BS EN 26789, ASME B107.14M. Only for 6 mm slimBits.
Accuracy: ±6%, traceable to national standards. Bits: Protective insulation moulded directly onto the bit,
Application: For electrical applications up to 1000 V AC where completely integrated into the bit in the lower area.
recommended torque settings are important. Extra: Individually tested protective isolation 1000 V AC, VDE and GS-tested.
Use in combination with a Wiha torque VDE interchangeable blade. Application: Set for starting Wiha slimTECHNOLOGY, for existing
Extra: Delivered in practical plastic box, incl. factory calibration certificate. TorqueVario®-S VDE torque screwdriver.
NEW
2879 slimTorque VDE bit holder for 6 mm slimBits.
Protective isolation 1000 V AC, GS inspected.
Exclusively for Wiha VDE torque screwdrivers.
Blade: High-quality chrome-vanadium molybdenum steel, through-hardened,
bronzed.
Protective insulation moulded directly onto the blade.
Bit mount: ClicFix quick release holder securely locks bits.
Only for 6 mm slimBits. 285-900 Torque-Setter.
Standards: Manufactured according to IEC 60900:2004. Setting tool for variable torque screwdrivers.
Application: For use of Wiha 6 mm slimBits with Included in every torque screwdriver delivery.
Wiha VDE torque screwdrivers. Blade: Octagonal blade, through hardened, zinc-plated.
Attention: Not for use with bit styles C 6.3 and E 6.3. Handle: Cellulose acetate with micro-fine surface structure.
Order-No. Order-No.
35870 9 6 3.8 170 13 5 26864 0 80 150 1
13
Wiha Torque VDE screwdrivers.
Precise and high repeat accuracy.
NEW NEW
2872 T9 slimTorque starter set, 9 pcs. 2872 T10 slim selection set, 10 pcs.
Torque value can be set via a window scale. Complete VDE set with torque screwdriver,
With slimTorque VDE bit holder for 6 mm slimBits. bit holder and slimBits. Slotted/ Phillips/ Pozidriv.
Handle: VDE torque handle 1.0 – 5.0 Nm, steplessly adjustable with Handles: VDE torque handle 1.0 – 5.0 Nm, steplessly adjustable.
Torque Setter adjusting tool (included in delivery). Bit holder with SoftFinish® electric multi-component handle.
Bit holder: ClicFix quick release holder securely locks bits. Bit mount: ClicFix quick release holder securely locks bits.
Only for 6 mm slimBits. Only for 6 mm slimBits.
Bits: Protective insulation moulded directly onto the bit, Bits: Protective insulation moulded directly onto the bit,
completely integrated into the bit in the lower area. completely integrated into the bit in the lower area.
Individually tested protective isolation 1000 V AC, VDE and GS-tested. Individually tested protective isolation 1000 V AC, VDE and GS-tested.
Application: For controlled fastening with live parts up to 1000 V AC. Application: For controlled fastening with live parts up to 1000 V AC.
Extra: 100% safety by achieving the switchgear manufacturers exact torque Extra: 100% safety by achieving the switchgear manufacturers exact torque
requirements and complying with the type-tested standards EN 60439-1. requirements and complying with the type-tested standards EN 60439-1.
Effortless access to low-lying fastening elements. Effortless access to low-lying fastening elements.
Arranged clearly in a high quality, rugged and durable bag. Arranged clearly in a high quality, rugged and durable bag.
14
www.wiha.com
2879 Torque VDE Phillips interchangeable blade. 2879 Torque VDE slotted interchangeable blade.
Insulation up to 1000 V AC, GS-mark. Insulation up to 1000 V AC, GS-mark.
Exclusively for Wiha VDE torque screwdrivers. Exclusively for Wiha VDE torque screwdrivers.
Blade: High quality chrome-vanadium-molybdenum steel, Standards: Tip DIN ISO 2380.
through hardened, black-finish.
Insulation moulded directly onto blade. Order-No.
Standards: Tip DIN ISO 8764. 26687 5 0.5 3.0 3.8 220 65 0.6 5
Manufactured acc. to IEC 60900:2004, 26688 2 0.6 3.5 3.8 220 65 1.1 5
each tool individually tested at 10 000 volts. 26689 9 0.8 4.0 3.8 220 65 2.5 5
Application: For controlled fastening on live parts up to 1000 V AC. 26690 5 1.0 5.5 3.8 220 65 3.8 5
Order-No.
26691 2 PH0 3.8 220 65 0.9 5
26692 9 PH1 3.8 220 65 3.8 5
26693 6 PH2 3.8 220 65 5.5 slim version 5
Order-No.
33585 4 SL/PH1 3.8 220 65 3.8 5
33571 7 SL/PH2 3.8 220 65 5.5 slim version 5
Order-No.
33572 4 SL/PZ1 3.8 220 65 3.8 5
33586 1 SL/PZ2 3.8 220 65 5.5 slim version 5
15
Wiha slim selection set.
Everything in one.
+ =
slimVario slimTorque
VDE exchange bit system VDE torque system
16
www.wiha.com
e r y t h i ng
Ev –
in one !
l e c t i o n
s lim S e
NEW
Wiha slimTECHNOLOGY:
slimVario slimTorque
slimTECHNOLOGY
Order-No.
34577 8 6 30 50 160 5
Order-No. Order-No.
34578 5 2.5 90 0.4 6.0 no slim version 1 35506 7 T8 90 6.0 1
34579 2 3.0 90 0.5 6.0 no slim version 1 35507 4 T10 90 6.0 1
34580 8 4.0 90 0.8 6.0 1 35508 1 T15 90 6.0 1
34581 5 5.5 90 1.0 6.0 1 35509 8 T20 90 6.0 1
34582 2 6.5 90 1.2 6.0 1 36071 9 T25 90 6.0 1
NEW
2831-11 SoftFinish® electric slimBit, Phillips. 2831-17 SoftFinish® electric slimBit, square (Robertson).
Individually tested protective isolation 1000 V AC, VDE and GS-tested. Individually tested protective isolation 1000 V AC, VDE and GS-tested.
Order-No. Order-No.
34583 9 PH1 90 6.0 1 35510 4 Robertson 1 2.3 90 6.0 1
34584 6 PH2 90 6.0 1 35511 1 Robertson 2 2.8 90 6.0 1
NEW
2831-12 SoftFinish® electric slimBit, Pozidriv.
Individually tested protective isolation 1000 V AC, VDE and GS-tested.
Order-No.
34585 3 PZ1 90 6.0 1
34586 0 PZ2 90 6.0 1
19
Wiha SoftFinish® electric slimVario.
Maximum safety at minimum size.
Sets. Sets.
NEW
2831 B602 slimBit pack, slotted/ Pozidriv, 6 pcs.
Order-No. Series
36089 4 2831 B602 1 2831 T702 slimVario starter pack,
2831-10 1x2.5 1x3.0 1x4.0 slotted/ Phillips, 7 pcs.
1x5.5
2831-12 1xPZ1 1xPZ2 Order-No. Series
34734 5 2831 T702 1
2831-10 1x2.5 1x3.0 1x4.0 1x5.5
2831-11 1xPH1 1xPH2
2831-00 SoftFinish® electric slimVario bit holder
NEW
2831 B603 slimBit pack, slotted/ Xeno (slotted/ Pozidriv), 6 pcs.
Order-No. Series
36090 0 2831 B603 1 2831 T703 slimVario starter pack,
2831-10 1x2.5 1x3.0 1x4.0 slotted/ Xeno (slotted/ Pozidriv), 7 pcs.
1x5.5
2831-14 1xSL/PZ1 1xSL/PZ2 Order-No. Series
34735 2 2831 T703 1
2831-10 1x3.0 1x4.0 1x5.5 1x6.5
2831-14 1xSL/PZ1 1xSL/PZ2
2831-00 SoftFinish® electric slimVario bit holder
20
www.wiha.com
NEW NEW
2831 T704 slimVario starter set, 7 pcs. 2831 T16 slimVario starter set, 16 pcs.
Popular slimBits in a bag. All commonly used slimBits in a bag.
Slotted/ Phillips. Slotted/ Phillips/ Pozidriv/ Pozidriv Xeno/ TORX®.
Bits: High-quality chrome vanadium steel, through-hardened, bronzed. Extra: SoftFinish® voltage tester 110 – 250 V.
Protective insulation moulded directly onto the bit,
completely integrated into the blade in the lower area. Order-No. Series
Individually tested protective isolation 1000 V AC, VDE and GS-tested. 36068 9 2831 T16 1
Bit mount: ClicFix quick release holder securely locks bits. 2831-10 1x2.5 1x3.0 1x4.0
Only for 6 mm slimBits. 1x5.5
Handle: Wiha SoftFinish® electric multi-component handle with roll-off protection. 2831-11 1xPH1 1xPH2
Application: For all work on or around electrical components up to 1000 V AC. 2831-12 1xPZ1 1xPZ2
Extra: Effortless access to low-lying fastening elements. 2831-14 1xSL/PZ1 1xSL/PZ2
Arranged clearly in a high quality, rugged and durable bag. 2831-15 1xT10 1xT15 1xT20
1xT25
Order-No. Series 2831-00 SoftFinish® electric slimVario bit holder
36069 6 2831 T704 1 255-11 SoftFinish® voltage tester 110 – 250 V
2831-10 1x2.5 1x3.0 1x4.0
1x5.5
2831-11 1xPH1 1xPH2
2831-00 SoftFinish® electric slimVario bit holder
NEW
2872 T10 slim selection set, 10 pcs.
Complete VDE set with torque screwdriver,
bit holder and slimBits.
Slotted/ Phillips/ Pozidriv.
Handles: VDE torque handle 1.0 – 5.0 Nm, steplessly adjustable.
NEW Bit holder with SoftFinish® electric multi-component handle.
2831 T705 slimVario starter set, 7 pcs. Application: For controlled fastening with live parts up to 1000 V AC.
Popular slimBits in a bag. Extra: 100% safety by achieving the switchgear manufacturers exact torque
Slotted/ Pozidriv. requirements and complying with the type-tested standards EN 60439-1.
21
Wiha SoftFinish® electric slimFix.
The safe and comfortable insulated VDE screwdriver.
slimTECHNOLOGY
22
www.wiha.com
For slotted, Phillips and Pozidriv screws. For internal square-drive screws and terminal screws. Set.
NEW
3581 SoftFinish® electric slimFix square (Robertson) screwdriver.
3201 SoftFinish® electric slimFix slotted screwdriver. Individually tested protective isolation 1000 V AC, VDE and GS-tested.
Individually tested protective isolation 1000 V AC, VDE and GS-tested. Standards: Manufactured acc. to IEC 60900:2004.
Blade: High quality chrome-vanadium-molybdenum steel, through hardened, Extra: The integrated protective insulation enables low-lying fastening and
black-finish. spring elements to be reached and manipulated.
Protective insulation moulded directly onto the blade
and completely integrated into the blade in the lower area. Order-No.
Handle: Ergonomic Wiha SoftFinish® multi-component handle with roll-off protection. 35504 3 Robertson 1 2.3 100 211 30 10
Standards: DIN ISO 2380. Manufactured acc. to IEC 60900:2004. 35505 0 Robertson 2 2.8 125 243 36 10
Application: For all work on or around electrical components up to 1000 V AC.
Extra: The integrated protective insulation enables low-lying fastening and
spring elements to be reached and manipulated.
Order-No.
35446 6 3.5 100 0.6 204 23 10
35390 2 4.0 100 0.8 211 30 10
35501 2 4.5 125 1.0 236 30 NEW 10 NEW
35391 9 5.5 125 1.0 243 36 10 3271 SoftFinish® electric slimFix Xeno.
35392 6 6.5 150 1.2 268 36 10 For terminal screws (slotted/ Phillips).
Individually tested protective isolation 1000 V AC, VDE and GS-tested.
Standards: Manufactured acc. to IEC 60900:2004.
Extra: The integrated protective insulation enables low-lying fastening and
spring elements to be reached and manipulated.
Order-No.
35502 9 SL/PH1 80 191 30 10
35503 6 SL/PH2 100 218 36 10
Order-No.
35393 3 PH1 80 191 30 10
35394 0 PH2 100 218 36 10
23
Wiha Xeno.
For terminal screws.
See page 23
See page 19 – 21
For slotted and Phillips screws. For Pozidriv and TORX® screws.
320N SoftFinish® electric slotted screwdriver. 324 SoftFinish® electric Pozidriv screwdriver.
Insulation 1000 V AC, VDE-tested and with GS mark. Insulation 1000 V AC, VDE-tested and with GS mark.
Blade: High quality chrome-vanadium-molybdenum steel, through hardened, Blade: High quality chrome-vanadium-molybdenum steel, through hardened,
black-finish. black-finish.
Insulation moulded directly onto blade. Insulation moulded directly onto blade.
Handle: Ergonomic Wiha SoftFinish® multi-component handle with roll-off protection. Handle: Ergonomic Wiha SoftFinish® multi-component handle with roll-off protection.
Standards: DIN ISO 2380. Manufactured acc. to IEC 60900:2004. Standards: DIN ISO 8764. Manufactured acc. to IEC 60900:2004.
Application: For all work on or around electrical components up to 1000 V AC. Application: For all work on or around electrical components up to 1000 V AC.
Order-No. Order-No.
00819 2 2.0 60 0.4 164 23 10 00877 2 PZ0 60 164 23 10
00820 8 2.5 75 0.4 179 23 10 00878 9 PZ1 80 191 30 10
00821 5 3.0 100 0.5 204 23 10 00879 6 PZ2 100 218 36 10
00822 2 3.5 100 0.6 204 23 10 00880 2 PZ3 150 324 41 5
00823 9 4.0 100 0.8 211 30 10
00824 6 4.5• 125 1.0 236 30 10
00825 3 4.5• 175 1.0 286 30 5
31863 5 4.5• 200 1.0 311 30 10
00826 0 5.5 125 1.0 243 36 10
00827 7 5.5• 175 1.0 293 36 5
00828 4 6.0• 150 1.2 268 36 10
00829 1 6.5 150 1.2 268 36 10
00830 7 8.0 175 1.2 299 41 10
00831 4 8.0 175 1.6 299 41 10
00832 1 10.0 200 1.6 324 41 10
• Additional dimension. Non-DIN size 325 SoftFinish® electric TORX® screwdriver.
Insulation 1000 V AC, VDE-tested and with GS mark.
Blade: High quality chrome-vanadium-molybdenum steel, through hardened,
black-finish.
Insulation moulded directly onto blade.
Handle: Ergonomic Wiha SoftFinish® multi-component handle with roll-off protection.
Standards: Manufactured acc. to IEC 60900:2004.
Application: For all work on or around electrical components up to 1000 V AC.
321N SoftFinish® electric Phillips screwdriver.
Insulation 1000 V AC, VDE-tested and with GS mark. Order-No.
Blade: High quality chrome-vanadium-molybdenum steel, through hardened, 03760 4 T5 60 164 23 10
black-finish. 03761 1 T6 60 164 23 10
Insulation moulded directly onto blade. 03762 8 T7 60 164 23 10
Handle: Ergonomic Wiha SoftFinish® multi-component handle with roll-off protection. 00881 9 T8 60 164 23 10
Standards: DIN ISO 8764. Manufactured acc. to IEC 60900:2004. 00882 6 T9 60 164 23 10
Application: For all work on or around electrical components up to 1000 V AC. 00883 3 T10 60 164 23 10
00884 0 T15 80 191 30 10
Order-No. 00885 7 T20 80 191 30 10
00846 8 PH0 60 164 23 10 00886 4 T25 80 198 36 10
00847 5 PH1 80 191 30 10 00887 1 T27 100 218 36 10
00848 2 PH2 100 218 36 10 00888 8 T30 100 218 36 10
00849 9 PH3 150 268 41 10 00889 5 T40 150 274 41 5
00850 5 PH4 200 318 41 5 03763 5 T45 150 274 41 5
26
www.wiha.com
For hex nuts. For Allen screws and internal square-drive screws.
322 SoftFinish® electric hex nut driver. 323N SoftFinish® electric hex screwdriver.
Insulation 1000 V AC, VDE-tested and with GS mark. Insulation 1000 V AC, VDE-tested and with GS mark.
Blade: Chrome-vanadium steel, through hardened, black-finish. Blade: Chrome-vanadium steel, through hardened, black-finish.
Insulation moulded directly onto blade. Insulation moulded directly onto blade.
Deep drawn socket. Handle: Ergonomic Wiha SoftFinish® multi-component handle
Handle: Ergonomic Wiha SoftFinish® multi-component handle with roll-off protection. with roll-off protection.
Standards: DIN 3125. Manufactured acc. to IEC 60900:2004. Standards: Manufactured acc. to IEC 60900:2004.
Application: For external hex screws and hex nuts. Application: For internal hex screws.
Order-No. Order-No.
00853 6 4 125 236 30 10.2 10 30361 7 2.5 75 179 23 10
00855 0 5 125 236 30 11.2 10 30362 4 3.0 75 179 23 10
00856 7 5.5 125 236 30 11.2 10 30363 1 4.0 75 186 30 10
00857 4 6 125 236 30 12.2 10 30364 8 5.0 75 186 30 10
00858 1 7 125 243 36 14.5 10 30365 5 6.0 100 218 36 10
00859 8 8 125 243 36 15.2 10 30366 2 8.0 100 218 36 10
00860 4 9 125 243 36 16.0 10
00861 1 10 125 243 36 17.2 10
00862 8 11 125 243 41 19.2 5
00863 5 12 125 243 41 20.2 5
00864 2 13 125 243 41 22.2 5
00865 9 14 125 243 41 23.2 5
00866 6 15 125 243 41 25.2 5
00867 3 16 125 243 41 25.2 5 358N SoftFinish® electric square-drive (Robertson) screwdriver.
00868 0 17 125 243 41 27.2 5 Insulation 1000 V AC, VDE-tested and with GS mark.
Blade: High quality chrome-vanadium-molybdenum steel, through hardened,
black-finish.
Insulation moulded directly onto blade.
Handle: Ergonomic Wiha SoftFinish® multi-component handle with roll-off protection.
Standards: Manufactured acc. to IEC 60900:2004.
Application: For fastening and unfastening internal square-drive (Robertson) screws.
Order-No.
32396 7 Robertson 1 2.3 100 211 30 10
32397 4 Robertson 2 2.8 150 268 36 10
27
Wiha SoftFinish® electric Xeno.
For terminal screws.
For terminal screws (slotted/ Phillips). For terminal screws (slotted/ Pozidriv).
SL/PH SL/PZ
Order-No. Order-No.
30716 5 SL/PH1 80 191 30 10 30700 4 SL/PZ1 80 191 30 10
30715 8 SL/PH2 100 218 36 10 30701 1 SL/PZ2 100 218 36 10
SB327 S2 SoftFinish® electric Xeno screwdriver set, 2 pcs. SB328 S2 SoftFinish® electric Xeno screwdriver set, 2 pcs.
For terminal screws (slotted/ Phillips). For terminal screws (slotted/ Pozidriv).
Insulation 1000 V AC, VDE-tested and with GS mark. Insulation 1000 V AC, VDE-tested and with GS mark.
Blade: High quality chrome-vanadium-molybdenum steel, through hardened, Blade: High quality chrome-vanadium-molybdenum steel, through hardened,
black-finish. black-finish.
Insulation moulded directly onto blade. Insulation moulded directly onto blade.
Handle: Ergonomic Wiha SoftFinish® multi-component handle with roll-off protection. Handle: Ergonomic Wiha SoftFinish® multi-component handle with roll-off protection.
Standards: Manufactured acc. to IEC 60900:2004. Standards: Manufactured acc. to IEC 60900:2004.
Application: For all work on or around electrical components up to 1000 V AC. Application: For all work on or around electrical components up to 1000 V AC.
Extra: Blister packed. Extra: Blister packed.
28
www.wiha.com
Sets. Sets.
320N K6 SoftFinish® electric slotted/ Phillips screwdriver set, 6 pcs. 325N K6 01 SoftFinish® electric TORX® screwdriver set, 6 pcs.
Insulation 1000 V AC, VDE-tested and with GS mark. Insulation 1000 V AC, VDE-tested and with GS mark.
Blade: High quality chrome-vanadium-molybdenum steel, through hardened, Blade: High quality chrome-vanadium-molybdenum steel, through hardened,
black-finish. black-finish.
Insulation moulded directly onto blade. Insulation moulded directly onto blade.
Handle: Ergonomic Wiha SoftFinish® multi-component handle Handle: Ergonomic Wiha SoftFinish® multi-component handle
with roll-off protection. with roll-off protection.
Standards: Manufactured acc. to IEC 60900:2004. Standards: Manufactured acc. to IEC 60900:2004.
Application: For all work on or around electrical components up to 1000 V AC. Application: For all work on or around electrical components up to 1000 V AC.
Order-No. Series
25477 3 320N ZK6 SO 1
320N 2.5x75 3.5x100 4.5x125 5.5x125
324 PZ1x80 PZ2x100
322 K5 SoftFinish® electric hex nut driver set, 5 pcs.
Insulation 1000 V AC, VDE-tested and with GS mark.
Blade: Chrome-vanadium steel, through hardened, black-finish.
Insulation moulded directly onto blade.
Deep drawn socket.
with SoftFinish®
voltage tester Order-No. Series
29466 3 322 K5 1
322 5.5x125 7x125 8x125
10x125 13x125
Order-No. Series
00834 5 320N K7 1
320N 2.5x75 4.0x100 5.5x125 6.5x150
321N PH1x80 PH2x100
255-11 3.0x65
29
Wiha Classic electric.
The space-saving insulated VDE screwdriver.
Order-No.
00782 9 1.6 40 0.4 115 19 10
00783 6 2.3 60 0.5 135 19 10 320 K6 Classic electric slotted/ Phillips screwdriver set, 6 pcs.
00784 3 2.5 75 0.4 150 19 10 Insulation 1000 V AC, VDE-tested and with GS mark.
00785 0 2.8 75 0.6 150 19 10 Blade: Chrome-vanadium steel, through hardened, black-finish.
00786 7 3.0• 100 0.5 175 19 10 Insulation moulded directly onto blade.
06568 3 3.0 150 0.5 225 19 10 Handle: Impact, oil and grease resistant Wiha Classic handle.
00787 4 3.5 100 0.6 185 22 10 Standards: Manufactured acc. to IEC 60900:2004.
00788 1 3.5 100 0.8 185 22 10 Application: For all work on or around electrical components up to 1000 V AC.
00789 8 4.0 100 0.8 195 24 10
06569 0 4.0 150 0.8 245 24 10 Order-No. Series
00790 4 4.5 125 1.0 220 24 10 00815 4 320 K6 1
00791 1 4.5• 175 1.0 270 24 10 320 2.8x75 4.0x100 5.5x125 6.5x150
06570 6 5.0 100 1.0 195 24 10 321 PH1x80 PH2x100
06571 3 5.0 150 1.0 245 24 10
00792 8 5.5 125 1.0 230 28 10
00793 5 5.5• 175 1.0 280 28 10
06573 7 6.0 100 1.2 205 28 10
00794 2 6.0 150 1.2 255 28 10 with
voltage tester
00795 9 6.5 150 1.2 255 28 10
00796 6 8.0 175 1.2 290 32 10
00797 3 10.0 200 1.6 325 36 10
• Additional dimension. Non-DIN size
30
www.wiha.com
Order-No.
27928 8 4 150 176 80 26 5
27929 5 5 150 182 100 32 5
27930 1 6 150 182 100 32 5
27931 8 8 150 182 100 32 5
Order-No.
27932 5 8 200 232 100 32 5
27933 2 10 230 262 100 32 5
27934 9 13 230 262 100 32 5
27935 6 17 230 268 120 38 5
31
Wiha single-pole voltage tester.
For both DIY and professional users.
255-11 Single-pole SoftFinish® voltage tester, 110-250 volts. 255-1 Single-pole voltage tester, 220-250 volts.
Individually-tested safety according to DIN VDE 0680-6 ensured, Individually-tested safety according to DIN VDE 0680-6 ensured,
GS tested and CE compliant. GS tested and CE compliant.
Blade: High-quality chrome-vanadium molybdenum steel, through-hardened, Blade: Slotted blade, 55 mm long.
nickel-coated. Handle: Transparent with clip.
Insulation moulded directly onto blade. Application: For both DIY and professional users.
Handle: Ergonomic Wiha SoftFinish® handle of transparent, impact resistant plastic.
Metal contact plate and robust clip. Order-No.
Standards: DIN ISO 2380, VDE 0680-6. 00451 4 3.0 55 130 14 in pouch 10
Application: For determining alternating voltages in low voltage range up to 250 V 05269 0 3.0 55 130 14 single 10
with respect to earth potential.
Suitable for trade and industry professionals and craftsmen.
Extra: Tried-and-proven Wiha SoftFinish® screwdriver
with additional testing function.
Order-No.
32200 7 3.0 55 130 14 1
32
www.wiha.com
255-3 Single-pole voltage tester, 220-250 volts. 255-7 Single-pole voltage tester, 220-250 volts.
Individually-tested safety according to DIN VDE 0680-6 ensured, Individually-tested safety according to DIN VDE 0680-6 ensured,
GS tested and CE compliant. GS tested and CE compliant.
Blade: Slotted blade, 65 mm long. Blade: Slotted blade, 70 mm long.
Handle: Transparent with clip. Handle: Black with clip.
Application: For both DIY and professional users. Application: For both DIY and professional users.
Order-No. Order-No.
00454 5 3.0 65 140 15 in pouch 10 00456 9 3.0 70 165 17 single 10
05271 3 3.0 65 140 15 single 10
Order-No.
00457 6 3.5 100 185 19 single 10
Order-No. Order-No.
32385 1 1 32202 1 3.5 100 185 19 1
255-4 Single-pole voltage tester, 100-500 volts. 258-4 Automotive circuit tester 6-24 volts.
Blade: Slotted blade, 107 mm long. With alligator clip, probe tip with protective cap.
Handle: Transparent. Application: Ideal for automotive circuit testing.
Application: For both DIY and professional users. Extra: Storage pouch supplied.
Order-No. Order-No.
27863 2 4.0 107 200 18 in pouch 10 00468 2 120 24 volts 10
27862 5 4.0 107 200 18 single 10 00472 9 Replacement bulb 24 V 10
33
Wiha Inomic® VDE.
Completely relaxed.
Locking mechanism:
Pliers should be transported
and stored in closed position
Order-No. Order-No.
30658 8 180 3.5 2.5 1.6 160 5 30661 8 160 2.5 1.6 155 5
Radial
abduction
Ulnar
abduction
Z 12 9 16 Diagonal cutters Inomic® VDE.
Insulation up to 1000 V AC, GS-mark.
Standards: Manufactured acc. to IEC 60900:2004.
Head shape: Innovative head with dual cutting function.
The Inomic® pliers are angled Cutting edge with bevel near the joint, cutting edge
at 23° to support the physiological without bevel in the front cutting area.
movement of the wrist when working ®
Design: Cutting edges additionally induction hardened to approx. 62 HRC.
and thus prevent an unhealthy wrist
Arms of the pliers move in parallel: +25% force transfer.
position, which often leads to problems
such as carpal tunnel syndrome. Angled shape (23°) for fatigue-free work.
With opening spring and locking mechanism.
Material: Head of pliers made of ball-bearing steel, hardened to approx. 60 HRC.
Handles made of tough fibre-glass reinforced plastic,
ergonomic soft grip zone in the handle.
Details of cutting results of cutting pliers. Application: For cutting hard wires in the joint area.
Symbol Types of wire Example Tensile strength ca. N/mm2 Flush, burr-free cutting of soft wires, cables and plastics
Soft wire Copper, aluminium 220 - 250 in the front cutting area.
Medium hard wire Iron nail 750 - 800 With improved access to the objects to be processed.
Hard wire Spring wire, steel nails 1,600 - 1,800
Piano wire Hardened spring steel 2,200 - 2,300 Order-No.
Test wires standardised in DIN ISO 5744 30666 3 160 3.5 2.5 1.6 145 5
35
Wiha Professional electric.
Completely reliable.
Valuable chrome
plating for long lasting
corrosion protection
Up to 40 % less force
• Uncompromisingly safe
Manufactured and inspected
required for cutting according to IEC 60900:2004,
one-off testing at 10,000 V,
GS mark for inspected safety,
VDE tested
For the VDE-tested Wiha Professional
electric pliers only one thing counts: • Powerful
to protect the user one hundred With DynamicJoint, the high
percent when working precisely with quality joint construction
live parts. for simple, long-term cutting
efficiency
The new DynamicJoint construction • As hard as steel
proves its worth: it makes cutting Must maintain the highest level of electrical Pliers head drop forged
significantly easier and helps to Less force Competition test safety! All Wiha Professional electric pliers
meet the strict VDE requirements. from high quality steels
eliminate the danger of cramping of power: TÜV Süd (11/2009)
Z 01 0 06 Combination pliers Professional electric. Z 05 0 06 Needle nose pliers Professional electric with cutting edge.
Insulation 1000 V AC, VDE-tested and with GS mark. Insulation 1000 V AC, VDE-tested and with GS mark.
Standards: DIN ISO 5746. Manufactured acc. to IEC 60900:2004. Standards: DIN ISO 5745. Manufactured acc. to IEC 60900:2004.
Head shape: Extra long cutting edge for flat and round cables. Head shape: Straight shape.
Design: Serrated gripper jaws. Cutting edges additionally induction hardened to Design: Extra long cutting edge for flat and round cables.
approx. 62 HRC. The Wiha DynamicJoint ensures optimal transmission Gripping surfaces serrated in parts.
of hand strength to the cutting edges. Cutting edges additionally induction hardened to approx. 62 HRC.
Material: High-quality tool steel, tempered. Material: High-quality tool steel, tempered.
Application: General purpose pliers for gripping and holding as well as cutting Application: Gripping and holding as well as cutting soft and hard wires and cables.
soft and hard wires and cables. Preferred choice in the electrical sectors.
For all work on or around electrical components up to 1000 V AC.
Order-No.
26705 6 160 6½ 3.2 2.0 195 5 Order-No.
26708 7 180 7 3.4 2.2 245 5 26720 9 160 6½ 2.5 1.8 155 5
26711 7 200 8 3.6 2.5 325 5 26727 8 200 8 2.8 2.0 200 5
Z 02 0 06 High leverage combination pliers Professional electric. Z 05 1 06 Needle nose pliers Professional electric with cutting edge.
Insulation 1000 V AC, VDE-tested and with GS mark. Insulation 1000 V AC, VDE-tested and with GS mark.
Standards: DIN ISO 5746. Manufactured acc. to IEC 60900:2004. Standards: DIN ISO 5745. Manufactured acc. to IEC 60900:2004.
Head shape: Extra long cutting edge for flat and round cables. Head shape: Angled, approx. 40°.
Design: Serrated gripper jaws. Particularly powerful leverage results in 40% less effort Design: Extra long cutting edge for flat and round cables.
being required for cutting tasks compared with standard combination pliers. Gripping surfaces serrated in parts.
Cutting edges additionally inductively hardened to approx. 64 HRC, Cutting edges additionally induction hardened to approx. 62 HRC.
therefore also appropriate for cutting piano wire. Material: High-quality tool steel, tempered.
The Wiha DynamicJoint ensures optimal transmission of hand strength Application: Gripping and holding as well as cutting soft and hard wires and cables.
to the cutting edges. Preferred choice in the electrical sectors.
Material: High-quality tool steel, specially tempered. For all work on or around electrical components up to 1000 V AC.
Application: Power assisted general purpose pliers for gripping and holding as well as
cutting wires and cables ranging in hardness from soft to extremely hard. Order-No.
26728 5 160 6½ 2.5 1.8 155 5
Order-No. 26729 2 200 8 2.8 2.0 200 5
26714 8 200 8 3.8 2.8 2.3 315 5
37
Wiha Professional electric.
Completely reliable.
Round nose pliers and diagonal cutters. Diagonal and cable cutters.
Order-No.
26748 3 160 6½ 3.5 2.5 2.0 190 5
26751 3 180 7 3.8 2.7 2.3 260 5
26754 4 200 8 4.2 3.0 2.5 315 5
38
www.wiha.com
Application: The small, basic set of pliers and screwdrivers for skilled electricians.
For all work on or around electrical components up to 1000 V AC.
Order-No. Series
26755 1 Z 99 0 002 06 1
Wiha Info
NEW
Competition test
Wiha DynamicJoint – TÜV Süd (11/2009)
Top of their class Less force of power:
• Innovative: - 9.6 kg
Unique joint construction,
patent applied for
• Effective: - 12.6 kg
Low loss of force means
less force needed for cutting – Details of cutting results of cutting pliers.
up to 40% Symbol Types of wire Example Tensile strength ca. N/mm2
• Permanent: Soft wire Copper, aluminium 220 - 250
Optimal performance even 1 2 3 Medium hard wire Iron nail 750 - 800
after thousands of cuts Competitors Hard wire Spring wire, steel nails 1,600 - 1,800
Up to 40% less force for cutting Piano wire Hardened spring steel 2,200 - 2,300
Test wires standardised in DIN ISO 5744
39
Wiha Professional electric.
Completely reliable.
40
www.wiha.com
Z 62 0 001 06 Crimp tools for wire-end sleeves. Z 62 0 002 06 Crimping tools for isolated cable eyes and contacts.
Standards: Wire-end sleeves with and without isolating collar Standards: Isolated cable eyes and connectors according to DIN.
according to DIN 46228, EN 50027. Head shape: Oval crimp, radial pressing.
Head shape: Trapezoid crimp, radial travel. Conducting and isolating crimp are carried out in one work step.
Design: Crimp profile: Design: Crimp profile:
Profile 1. 0.14 - 0.75 mm² / AWG 26 - 18 Red profile: 0.5 - 1.0 mm² / AWG 20 - 16
Profile 2. 1.0 - 1.5 mm²/ AWG 18 - 16 Blue profile: 1.5 - 2.5 mm²/ AWG 16 - 14
Profile 3. 2.5 mm² / AWG 14 Yellow profile: 4.0 - 6.0 mm² / AWG 12 - 10
Profile 4. 4.0 mm² / AWG 12 Delockable force lock for ensuring complete crimping process;
Profile 5. 6.0 mm²/ AWG 10 required crimp pressure is factory set.
Profile 6. 10.0 mm² / AWG 8 Ergonomically formed soft handle with slip protection
Delockable force lock for ensuring complete crimping process; for especially comfortable handling.
required crimp pressure is factory set. Material: Of high-tensile special steel.
Ergonomically formed soft handle with slip protection Parts subject to extreme loading are specially hardened and tempered.
for especially comfortable handling. Application: For processing of red, blue and yellow isolated cable eyes,
Material: Of high-tensile special steel. pin-end cable connectors, contact pins, contact pin sleeves,
Parts subject to extreme loading are specially hardened and tempered. circular pins, circular pin sleeves, batch connectors and parallel connectors.
Application: For processing of wire-end sleeves with and without isolating collars. For standardised, solderless electrical connections.
Order-No. Order-No.
33844 2 220 0.14 – 10 26 – 8 510 1 33841 1 220 0.5 – 6 20 – 10 510 1
Order-No.
33845 9 196 0.08 – 10 28 – 8 300 1
41
Wiha crimp and stripping tools.
Order-No.
33847 3 190 7½ 0.02 – 10 34 – 8 135 1
Z 62 0 004 06 Crimping tools for non-isolated cable eyes with closed sleeve.
Standards: Non-isolated cable eyes with closed crimping sleeve
according to DIN 46234 / DIN 46230 / DIN 46341.
Head shape: W injection, radial pressing.
Design: Crimp profile:
Profile 1. 0.1 - 0.5 mm² / AWG 26 - 20
Profile 2. 0.5 - 2.5 mm² / AWG 20 - 14
Profile 3. 4.0 - 6.0 mm² / AWG 12 - 10
Profile 4. 10.0 - 16.0 mm² / AWG 8 - 6 24673SB Stripping cassette for automatic stripping pliers.
Delockable force lock for ensuring complete crimping process; Blister packed.
required crimp pressure is factory set. Design: Cassette with straight blade.
Ergonomically formed soft handle with slip protection
for especially comfortable handling. Order-No.
Material: Of high-tensile special steel. 33846 6 0.02 – 10 34 – 8 7 1
Parts subject to extreme loading are specially hardened and tempered.
Application: For processing of non-isolated cable eyes, pin-end cable connectors,
batch connectors and mini cable eyes.
For solderless electrical connections according to standards.
Order-No.
33843 5 220 0.1 – 16 26 – 6 510 1
42
www.wiha.com
NEW
24678SB Stripping knife for round cables.
Blister packed.
Standards: Manufactured acc. to IEC 60900:2004.
Design: Robust, fixed, sickle-shaped hooked blade.
Shoe-shaped blade tip limits the cutting depth and prevents damage
NEW to conductors.
24675SB Automatic stripping pliers. Protective cap for safe transport and protection of cutting edges.
Blister packed. Material: Insulating multi-component handle. Blade of hardened, non-rusting steel.
Design: Automatic setting to various conductor diameters. Application: For stripping of thick cable types and cutting of various multi-sheathed
Settable length stop from 5 -12 mm, can be removed if required. cable layers.
Integrated, easily accessible wire cutter. For all work on or around electrical components up to 1000 V AC.
Light, ergonomically designed tool body with narrow head
for optimal use in hard-to-reach areas. Order-No.
Locking for safe, space-saving transport. 36053 5 200 8 120 1
Material: Housing of glass-fibre reinforced polyamide.
Application: Stripping of all commonly used flexible and solid conductors
from 0.2 – 6.0 mm² (24 – 10 AWG).
Wire cutter for cutting of copper and Al conductors to max. ø 2 mm.
Order-No. NEW
36050 4 190 7½ 0.2 – 6.0 24 – 10 110 1 24677SB Stripping tool for round cables.
Blister packed.
Design: Double layered, folding stripping tool with opening spring and
locking mechanism.
Setting of cutting depth not required.
Ergonomically designed tool body for non-slip, safe work.
Material: Housing of glass-fibre reinforced polyamide.
Application: Flush stripping of round and damp-proof cable from ø 8 – 13 mm
(e.g. NYM 3 x 1.5 mm² to 5 x 2.5 mm²), also for hard-to-reach locations
e.g. ceiling and wall areas, in junction boxes, distribution boxes,
switch cabinets etc.
Order-No.
2462202 Stripping tool. 36052 8 125 5 8 – 13 45 1
Design: Convenient stripping with steplessly adjustable cutting depth via
setting screw and self-rotating inner knife.
Damage to inner conductors is therefore impossible.
Self-tensioning fixing bracket for safe cable routing.
With knife and hooked blade incl. safety cap for transport and storage.
Spare blade in the tool. NEW
Ergonomically designed tool body. 24676SB Stripping tool for coaxial cables.
Material: Impact resistant plastic housing of glass-fibre reinforced polyamide. Blister packed.
Hooked blade and knife of hardened steel. Design: Double layered, folding stripping tool with opening spring and
Application: Precise, rapid and safe stripping of all commonly used round cable locking mechanism.
from ø 4 mm – 28 mm. Setting of cutting depth not required.
Self-rotating inner knife for round and length cutting. Extra-long tool body for optimal handling.
With 5.0 – 20.0 mm length scale.
Order-No. Material: Housing of glass-fibre reinforced polyamide.
35969 0 165 6½ 4.0 – 28 1 Application: Incremental stripping of all commonly used coaxial cables
(e.g. antenna and transmission cables) from 4.8 – 7.5 mm
outer diameter.
2462202SB Stripping tool. Also suitable for stripping of round cables
Blister packed. (e.g. NYM 3 x 0.75 mm², PVC flex 10 mm² and 16mm²).
Order-No. Order-No.
35538 8 165 6½ 4.0 – 28 1 36051 1 110 4¼ 4.8 – 7.5 30 1
43
Wiha VDE application sets.
The right tool for any application.
9300-012 Tool set for electrician’s belt bag, 10 pcs. 9300-014 Tool set for electrician’s belt bag, 10 pcs.
Phillips blades and stripping pliers. Phillips blades and electrician's shears.
Design: VDE tools with insulation up to 1000 V AC, GS-mark. Design: VDE tools with insulation up to 1000 V AC, GS-mark.
Individually tested for electrical safety according to IEC 60900:2004. Individually tested for electrical safety according to IEC 60900:2004.
Pouch: Tool belt bag for electricians, with space for the most important tools for Pouch: Tool belt bag for electricians, with space for the most important tools
house and building installation. for house and building installation.
Bag format: approx. 25 x 27 x 5 cm. Bag format: approx. 25 x 27 x 5 cm.
Application: Basic equipment with all necessary tools for all aspects of house Application: Basic equipment with all necessary tools for all aspects of house
and building installation. and building installation.
Order-No. Series
33154 2 9300-013 1
44
www.wiha.com
Order-No. Series
28143 4 9300-002 1
45
Wiha VDE application sets.
The right tool for any application.
with with
Xeno bits Xeno bits
9300-007 Tool set for switch cabinet construction, 31 pcs. 9300-008 Tool set for switch cabinet construction, 31 pcs.
Phillips blades. Pozidriv blades.
Design: VDE tools with protective isolation 1,000 V AC, GS-tested. Design: VDE tools with protective isolation 1,000 V AC, GS-tested.
Individually tested for electrical safety according to IEC 60900:2004. Individually tested for electrical safety according to IEC 60900:2004.
With 90 mm bits for reaching lower-lying screws in switch cabinet systems, With 90 mm bits for reaching lower-lying screws in switch cabinet systems,
fuse boxes and terminal blocks. fuse boxes and terminal blocks.
Automatic stripping pliers for fast, fatigue-free work. Automatic stripping pliers for fast, fatigue-free work.
Pouch: Practical, space-saving folding bag for the workbench and on the road. Pouch: Practical, space-saving folding bag for the workbench and on the road.
Orderly, clearly laid-out arrangement of the tools for fast, clean work. Orderly, clearly laid-out arrangement of the tools for fast, clean work.
Bag format: 33 x 27 x 6 cm. Bag format: 33 x 27 x 6 cm.
Application: Basic tool set for switch cabinet builders. Application: Basic tool set for switch cabinet builders.
46
www.wiha.com
9300-010 Tool set for service technicians, 29 pcs. 9300-011 Tool set for service technicians, 29 pcs.
Phillips blades. Pozidriv blades.
Design: VDE tools with protective isolation 1000 V AC, GS-tested. Design: VDE tools with protective isolation 1000 V AC, GS-tested.
Individually tested for electrical safety according to IEC 60900:2004. Individually tested for electrical safety according to IEC 60900:2004.
Automatic stripping pliers for fast, fatigue-free work. Automatic stripping pliers for fast, fatigue-free work.
With tool combinations for electronic applications. With tool combinations for electronic applications.
Pouch: Combined laptop bag/ toolbag; ideal for the service technician. Pouch: Combined laptop bag/ toolbag; ideal for the service technician.
Can be completely folded open with zipper. Can be completely folded open with zipper.
Several pocket compartments for hand tools, laptop and documents. Several pocket compartments for hand tools, laptop and documents.
Sufficient space for individual additional equipment. Tool side bags, Sufficient space for individual additional equipment. Tool side bags,
can be removed and used separately thanks to zip fastening. can be removed and used separately thanks to zip fastening.
Laptop bag suitable for all common laptops. Laptop bag suitable for all common laptops.
Bag format: approx. 47 x 35 x 22 cm. Bag format: approx. 47 x 35 x 22 cm.
Application: Basic equipment for the service technician. Application: Basic equipment for the service technician.
Suitable for electrical and electronic maintenance work on machines Suitable for electrical and electronic maintenance work on machines
and components. and components.
47
Wiha VDE application sets.
The right tool for any application.
9300-009 Tool set for service technicians, 29 pcs. 5590N T15 Insulated single-sided open-end spanner set, 15 pcs.
Mixed sets. Insulation 1000 V AC, VDE-tested and with GS mark.
Design: VDE tools with protective isolation 1000 V AC, GS-tested. Standards: DIN 7446.
Individually tested for electrical safety according to IEC 60900:2004. Manufactured according to IEC 60900:2004.
Automatic stripping pliers for fast, fatigue-free work. Design: Position of jaws angled downward 15°.
With tool combinations for electronic applications. Material: Forged chrome vanadium steel.
Pouch: Combined laptop bag/ toolbag; ideal for the service technician. Pouch: Practical, space-saving roll-up bag for the workbench and on the road.
Can be completely folded open with zipper. Application: Safe installation of terminals and sleeves.
Several pocket compartments for hand tools, laptop and documents. For all work on or around electrical components up to 1000 V AC.
Sufficient space for individual additional equipment. Tool side bags,
can be removed and used separately thanks to zip fastening. Order-No.
Laptop bag suitable for all common laptops. 33179 5 5590N T15 1
Bag format: approx. 47 x 35 x 22 cm. 5590N 6 7 8 9 10 11 12
13 14 15 16 17 19 22 24
Content: Insulated VDE-tested tools:
Professional electric needle nose pliers, 200 mm (Z 05 0 06 series)
Professional electric diagonal cutter, 160 mm (Z 12 0 06 series)
Wiha SoftFinish® electric screwdriver:
– Slotted screwdriver, 3.0x100 / 4.0x100 (320N series)
– Phillips screwdriver, PH1x80 / PH2x100 (321N series)
– Pozidriv screwdriver, PZ1x80 / PZ2x100 (324 series)
Single-pole voltage tester, VDE (255-3 series)
Non-insulated tools:
Electronic diagonal cutter, 138 mm (Z 41 1 03 series)
Electronic needle nose pliers, 135 mm (Z 36 0 03 series)
Wiha PicoFinish screwdriver:
– Slotted screwdriver, 1.5x40 / 2.0x40 / 2.5x50 / 3.0x50
(260P series)
– Phillips screwdriver, PH00x40 / PH0x50 (261P series) 5590N T8 Insulated single-sided open-end spanner set, 8 pcs.
Wiha hexagon L-key, metric: Insulation 1000 V AC, VDE-tested and with GS mark.
– Hexagon L-key set, 1.5-10 mm (369 H9 series) Standards: DIN 7446.
Cable stripping knife (246 series) Manufactured according to IEC 60900:2004.
Switch cabinet key (246 series) Design: Position of jaws angled downward 15°.
Automatic stripping pliers (246 series) Material: Forged chrome vanadium steel.
Pouch: Practical, space-saving roll-up bag for the workbench and on the road.
Application: Basic equipment for the service technician. Application: Safe installation of terminals and sleeves.
Suitable for electrical and electronic maintenance work on machines For all work on or around electrical components up to 1000 V AC.
and components.
Order-No.
Order-No. Series 33180 1 5590N T8 1
33150 4 9300-009 1 5590N 7 8 10 11 13 15 17 19
48
www.wiha.com
3/8" 1/2"
7207N K1001 3/8" reversible ratchet set, 10 pcs. 7208N K1001 1/2" reversible ratchet set, 10 pcs.
Insulation up to 1000 V AC. Insulation up to 1000 V AC.
Standards: Manufactured according to IEC 60900:2004. Standards: Manufactured according to IEC 60900:2004.
Design: Simple locking of the actuating tools Design: Simple locking of the actuating tools
with positive locking on the drive square. with positive locking on the drive square.
Clockwise and anticlockwise running. Clockwise and anticlockwise running.
Material: Chrome vanadium steel. Material: Chrome vanadium steel.
Order-No. Order-No.
33182 5 352N S7 1 33181 8 5589N K7 1
352N 3 4 5 6 8 10 12 5589N 8 10 12 13 14 17 19
49
Application accessories.
7049XH Xeno bit, slotted/ Phillips, style E 6.3. 7049XZ Xeno bit, slotted/ Pozidriv, style E 6.3.
For terminal screws (slotted/ Phillips). For terminal screws (slotted/ Pozidriv).
Material: High grade chrome-vanadium steel, through hardened. Material: High grade chrome-vanadium steel, through hardened.
Drive: DIN 3126, ISO 1173, style E 6.3. Drive: DIN 3126, ISO 1173, style E 6.3.
Application: For fastening and unfastening positive/ negative screws Application: For fastening and unfastening positive/ negative screws
in switchboard systems, fuse boxes, terminal blocks and relays. in switchboard systems, fuse boxes, terminal blocks and relays.
Order-No. Order-No.
32490 2 SL/PH1 50 5 32494 0 SL/PZ1 50 5
32491 9 SL/PH1 70 5 32495 7 SL/PZ1 70 5
32686 9 SL/PH1 90 5 32688 3 SL/PZ1 90 5
32492 6 SL/PH2 50 5 32496 4 SL/PZ2 50 5
32493 3 SL/PH2 70 5 32497 1 SL/PZ2 70 5
32687 6 SL/PH2 90 5 32689 0 SL/PZ2 90 5
50
www.wiha.com
with with
Xeno bits Xeno bits
79187 T01 Bit set for switch cabinet construction, 14 pcs. 79187 T02 Bit set for switch cabinet construction, 14 pcs.
Mixed sets. Equipped with Phillips, Xeno-PH and TORX®.
Bits: 90 mm bits, style E 6.3.
Holder: CentroFix quick release holder, magnetic, style E 6.3. Order-No. Series
Bit holder with SoftFinish® handle. 33143 6 79187 T02 1
Application: Basic bit set for switch cabinet builders. 281-02 Bit holder with handle, magnetic, 1/4"
With 90 mm bits for reaching lower-lying screws in switch cabinet systems, 7148CM CentroFix quick release holder, magnetic, style E 6.3
fuse boxes and terminal blocks. 7049XH 1xSL/PH1 2xSL/PH2
Set with Xeno bits for terminal screws. 7041 Z 1xPH1 2xPH2 1xPH3
7045 Z L 1xT10 1xT15 1xT20 1xT25 1xT30
Order-No. Series
33142 9 79187 T01 1
281-02 Bit holder with handle, magnetic, 1/4"
7148CM CentroFix quick release holder, magnetic, style E 6.3
7049XH 1xSL/PH1 1xSL/PH2
7049XZ 1xSL/PZ1 1xSL/PZ2
7041 Z 1xPH1 1xPH2
7042 Z 1xPZ1 1xPZ2
7045 Z L 1xT10 1xT15 1xT20 1xT25
with
Xeno bits
Order-No. Series
33144 3 79187 T03 1
281-02 Bit holder with handle, magnetic, 1/4"
7148CM CentroFix quick release holder, magnetic, style E 6.3
7049XZ 1xSL/PZ1 2xSL/PZ2
7042 Z 1xPZ1 2xPZ2 1xPZ3
7045 Z L 1xT10 1xT15 1xT20 1xT25 1xT30
51
Application accessories.
Wiha XSelector.
• Compact, smart, tidy!
• Equipped with 10 bits and
bit holder
The Wiha XSelector:
bit removal couldn’t be easier. • Ingeniously simple bit removal
Protector with System Loop: via integrated bit clamp
for attaching the 11-piece XSelector • With dimensions of just
to a belt or for wall-mounting.
75 x 53 x 15 mm, it fits in every
shirt or trouser pocket
• Together with the Protector,
can be attached to a belt
52
www.wiha.com
7948-927 XLSelector Standard, Security, 31 pcs. 7948-005 XLSelector Standard, mixed, 31 pcs.
Housing: Box made of high quality plastic. Housing: Box made of high quality plastic.
The simplest bit removal guaranteed. The simplest bit removal guaranteed.
Bits: 25 mm ZOT Torsion and Standard bits. Bits: 25 mm Standard bits.
Holder: ClicFix quick release holder, magnetic. Holder: Universal holder, magnetic.
Application: All types of fastenings for trade and industry – Application: All types of fastenings for trade and industry –
it can't get any more compact! it can't get any more compact!
Extra: Soft zones for maximum working comfort. Extra: Soft zones for maximum working comfort.
Bits for popular security screws.
Order-No. Series
Order-No. Series 29417 5 7948-005 5
29416 8 7948-927 5 7010 Z 1x4.5 1x5.5 1x6.5
7019 ZOT TW 1x0 1x1 1x2 1x3 1x4 7011 Z 2xPH1 4xPH2 1xPH3
7019 Z SP 1x4 1x6 1x8 1x10 7012 Z 2xPZ1 5xPZ2 1xPZ3
7013 Z TR 1xTR2.0 1xTR2.5 1xTR3.0 1xTR4.0 1xTR5.0 7015 Z 2xT10 2xT15 2xT20 3xT25 2xT30 1xT40
1xTR6.0 7113 S Universal holder, magnetic, style E 6.3
7019 ZOT TS 1x6 1x8 1x10
7015 Z TR 1xT8H 1xT9H 1xT10H 1xT15H 1xT20H
7018 Z 1xT25H 1xT27H 1xT30H 1xT40H
1x1 1x2 1x3
7149 ClicFix quick release holder, magnetic, style E 6.3
7944-005 XSelector Standard, mixed, 11 pcs. 7944-505 XSelector Standard, TORX®, 11 pcs.
Housing: Box made of high quality plastic. Housing: Box made of high quality plastic.
The simplest bit removal guaranteed. The simplest bit removal guaranteed.
Bits: 25 mm Standard bits. Bits: 25 mm Standard bits.
Holder: Universal holder, magnetic. Holder: Universal holder, magnetic.
Application: All types of fastenings for trade and industry – Application: All types of fastenings for trade and industry –
it can't get any more compact! it can't get any more compact!
SB7944-005 XSelector Standard, mixed, 11 pcs. SB7944-505 XSelector Standard, TORX®, 11 pcs.
Blister packed for hanging. Blister packed for hanging.
53
Application accessories.
7148CM CentroFix quick release holder, magnetic, style E 6.3. 7113 S Universal holder, magnetic, style E 6.3.
Sleeve: Metal, coated. Sleeve: Stainless steel.
Suitable for: For bits according to DIN 3126, ISO 1173 style C 6.3 and E 6.3. Suitable for: For bits according to DIN 3126, ISO 1173 style C 6.3.
Drive: DIN 3126, ISO 1173, style E 6.3. Drive: DIN 3126, ISO 1173, style E 6.3.
Packaging: Plastic box, reusable and dust repellent.
Application: Whenever the bit needs a secure and zero-play hold. Order-No.
Optimised for the use of drill bits. 01895 5 1/4 1/4 58 10
Extra: With the unique holding mechanism, this bit holder holds bits
with C 6.3 and E 6.3 forms.
The play between bit and holder is reduced to a minimum.
Real single-handed operation for fast bit exchange.
Order-No.
35386 5 1/4 1/4 60 10
NEW
7143 L Universal holder, magnetic/ retaining ring, style E 6.3.
Sleeve: Stainless steel.
Suitable for: For bits according to DIN 3126, ISO 1173 style C 6.3.
Drive: DIN 3126, ISO 1173, style E 6.3.
Application: For applications where the bit must be held tight e.g. assembly lines.
Extra: The alternative to long bits.
Order-No.
36092 4 1/4 1/4 100 5
34306 4 1/4 1/4 150 5
36093 1 1/4 1/4 200 5
Wiha CentroFix.
• Fits all bits with 1/4" hex drive
with styles C6.3 and E6.3
• Real one-hand application
for quick bit change
• The play between bit and
holder is reduced to a
minimum, particularly
important when drilling
• Guarantees high retention
forces, necessary when
drilling wood
54
www.wiha.com
Ball end hex L-key set. Ball end hex L-key set.
369 H9S Ball end hex L-key set in holder. 369 H9 Ball end hex L-key set in holder.
Brilliant chrome-plated, 9 pcs. Chrome-plated, 9 pcs.
Blade: Chrome vanadium steel, through-hardened, brilliant chrome-plated. Blade: Chrome-vanadium steel, through hardened,
Standards: Based on ISO 2936L. chrome-plated.
Application: Especially for screws that are difficult to access. Standards: Based on ISO 2936L.
Extra: Mechanical operation of the space-saving holder makes simplest removal Application: Especially for screws that are difficult to access.
of each individual L-key possible without movement of the others. Extra: Thanks to its compact dimensions, this holder fits easily
The ball end enables fastening and unfastening at an angle of up to 30°. into every ruler pocket.
Metric scale permanently lasered on to the SW 10 key for depth, Popular key sizes kept in a well-organised holder.
inner, outer and step measurements between 20 to 150 mm. The ball end enables the user to work at angles up to 25°.
Only available as part of a set.
Order-No.
Order-No. 01418 6 369 H9 5
34753 6 369 H9S 5 369 1.5 2 2.5 3 4 5 6 8 10
369S 1.5 2 2.5 3 4
5 6 8 10
Wiha ErgoStar.
• Innovative key extraction:
one turn and all L-keys are
rapidly and conveniently
ready for removal
• Quick replacement of keys
in the holder thanks to solid
stopping point
• Guaranteed firm fixing of keys
over the complete service life
• Up to 25% more corrosion
resistance thanks to high
quality brilliant chroming
• Metric scale (SW 10) in range
20 – 150 mm
55
Application accessories.
NEW
Z 21 0 02 Water pump pliers Industrial. Z 17 0 02 Industrial end cutting nippers.
Standards: DIN ISO 8976. Standards: DIN ISO 5748.
Head shape: Narrow head, therefore also appropriate for work in small spaces. Head shape: Classic style.
Design: Precision adjustment joint, box type, providing optimum adaptation Design: Low wear lap joint, riveted and able to withstand high levels of load.
to object to be gripped. Striking high quality cutting edge with high cutting performance and
Long durability achieved by additional inductive hardening of low application of force due to highly precise processing.
gripper jaws. Good durability due to additional induction hardening of cutting edges
Material: Chrome vanadium tool steel, tempered. to approx. 62 HRC.
Application: For gripping and holding pipes and angular profiles such as hex nuts Material: High-quality tool steel, tempered.
in the installation area. Application: Power assisted, all round diagonal cutter for soft wires as well as
demanding piano wires.
Order-No. Also appropriate for binding (plaiting) and cutting wire netting in reinforced
36038 2 180 7 1 30 170 NEW 5 concrete structures.
32342 4 250 10 2 50 380 5
36039 9 300 12 2½ 63 640 NEW 5 Order-No.
36035 1 160 6½ 3.5 2.5 180 5
36036 8 180 7 3.8 2.8 200 5
36037 5 200 8 4.0 3.0 220 5
Order-No.
36040 5 180 7 1 30 175 NEW 5
32352 3 250 10 2 50 400 5
36041 2 300 12 2½ 63 670 NEW 5
56
www.wiha.com
NEW 410 2007 Longlife All in One folding ruler, 2 m metric, 10 segments.
24667 Switch cabinet key for all common cabinets and locking systems. Material: Glass fibre reinforced polyamide. Scratch, weather and chemical resistant.
Material: Diecast zinc. Joints: Play free, wear resistant and maintenance free joint
Outputs: Adapter for 1/4" bits, rotation bit for 1.0 x 7 mm slotted screws and with steel spring pin for constant tension.
PH2 Phillips screws, internal square-drive, internal triangular-drive, Usefull 90° snap-in position.
dual bit. Scale: Deep embossed black scale in 1 mm increments.
Application: For applications with all common switch cabinets and locking systems Every 10 cm is marked in red.
for gas, water and electricity supplies. Accuracy: CE conformity, EU standard accuracy class III.
Also suitable for technical facilities in buildings such as air-conditioning Extra: Readable from both sides through a second, backwards running scale
and ventilation systems, stop valves, network switching panels etc. (Recto Verso).
Extra: Rotation bit and adapter for 1/4" bits to fastening chain. Depth measurement with push-out depth gauge.
Square wrench for radiator ventilation valves. Angle measurement with anchoring of depth gauge in fixation hole.
Order-No. Order-No.
36114 3 76 5 |6|8 9 9 88 5 33232 7 15 135 white 10
Joint
Depth
measurement
1 2 3 4 5 6 7
Wiha Industrial.
• As hard as steel
Pliers head drop forged
from high quality steels
• Robust and durable Fixation Angular display
Cutting edges are individually
tempered and additionally
induction hardened
• Ergonomic
Extra wide handle backs,
with soft and hard zones
perfectly distributed across
Angle gauge
the handle
• Attractive
Award-winning design
with high quality
chrome-plated head
57
Wiha VDE tools.
VDE in detail.
Wiha Info
What is VDE?
The VDE Testing and Certification Institute is a nationally and
internationally accredited institution in the field of testing
and certification of electrical engineering devices, components
and systems. These electrical products are tested for safety,
electromagnetic compatibility and other product properties.
Technical working equipment and If insulated tools or aids are An international standard which,
consumable materials subject to marked with the symbol of the among other things, describes the
the applicable device and product double triangle and the assigned design of insulated tools in detail.
safety laws bear the VDE-GS mark, voltage or voltage range specifica- For example, the thickness of the
which stands for the safety of the tion or the class, they are suitable protective insulation is specified.
product with regard to electrical, for working on energised parts. In addition, the standard defines
mechanical, thermal, toxicological, individual tests (piece tests) as
radiological and other dangers. well as series and random sample
In addition, tools with the VDE-GS tests for checking the electrical
mark conform to the VDE regulations safety of the protective insulation.
or European or internationally
harmonised standards, i.e. they
confirm the compliance with the
safety requirements of the respec-
tive guidelines.
58
www.wiha.com
Protective measures
For all work on or near live parts,
use the following required for
the respective work
• insulating personal safety
equipment,
• insulating safety equipment
and
Testing the electrical insulating Testing the adhesion of the • insulated tools.
properties insulating material coating
The tools are stored in water for 24 hours. To test the adhesion of the insulating Work should generally not be
Then they are tested at 10,000 V AC for coating, the adhesion is tested with a carried out on live active parts of
three minutes. Neither a sparkover nor a tensile force of 500 N following storage electrical systems and electrical
disruptive discharge through the insulation for 168 hours at 70° C. equipment. As a result, the parts
may occur. When doing so, the insulating material must be deenergised before
must continue to be firmly connected to starting work and this state must
the basic tool. be ensured for the duration of
the work.
59
Article No.: 99522 | FB-MA-1005-2/11-4.5 | Printed in Germany
Technical modifications reserved!
Wiha VDE Expertise
• Innovative products
• Many years of experience and VDE expertise
• Optimised and developed for electricians
• Application-oriented solutions to problems
• 100% certified safety (VDE, GS)
70 years
Innovation.
Quality.
Reliability.
Your stockist:
Wiha Asia Pacific Pte. Ltd. Wiha Nordic A/S Wiha Tools Ltd.
25 International Business Park Korskildelund 6 Avon House
#02 – 102 German Centre DK-2670 Greve Buntsford Drive, Stoke Heath
Singapore 609916 Tel. +45 70 23 80 45 Bromsgrove B60 4JE
Singapore Fax +45 70 23 80 46 Tel. +44 1527 57 57 58, 91 09 86
Tel. +65 6563 1277 info.nordic@wiha.com Fax +44 1527 88 81 20
Fax +65 6563 7168 www.wiha.com info.uk@wiha.com
info.sg@wiha.com www.wiha.com
www.wiha.com