Professional Documents
Culture Documents
A reinforced concrete flat slab floor consists of rectangular bays measuring 6.4 x 8.0 m, as shown in Fig.
2.1 below. The slab thickness is 250 mm. The supporting columns are 600mm x 600mm
The floor is designed to carry a service dead load of 2.0 kPa and live load of 4.0 kN/m2, uniformly
distributed over its surface in addition to its own weight.
a.) The slab flexural reinforcement for the exterior and interior spans of the interior panels in the
long direction. Use Table 3.12 of BS8110 to calculate the design moments.
c.) Check and design for punching shear. (Only for 1st perimeter punching shear control zone)