You are on page 1of 2

M.V.S.R.

ENGINEERING COLLEGE, NADERGUL HYDERABAD – 501 510


DEPARTMENT OF CIVIL ENGINEERING
Learning objectives & Outcomes
Name of the Course : Engineering Mechanics (CE 101)
B.E. : B.E. 1/4 (All Branches)
Acad.Yr. 2013-14,2014-15 &2015-16

Faculty Name : Mrs. Shweta Kaushik


UNIT I

Objectives: To provide information about the forces acting on a body; obtain resultant force or moment acting due
to set of forces and moments acting on a body; and determine unknown forces from equations of equilibrium of
forces and moments and to use the free body diagram in these topics covered .

Learning Outcomes: After completing this unit, students would be able to:

1. Analyze a problem of statics using free body diagram in a proper manner.


2. Resolution of forces using equations of equilibrium.

UNIT II

Objectives: To use concept of equilibrium to analyze a three dimensional space system and to use the concept of
free body diagram and equilibrium to the problems of statics with friction included

Learning Outcomes: After completing this unit, students would be able to:

1. Analyze a problem in three dimensional space using equations of equilibrium in space.


2. Analyze situations where friction also plays an important role.

UNIT III

Objectives: Obtain location of centres of mass of regular and composite shapes; use Pappus theorems to calculate
surface areas and volumes of composite structures. Compute area moment of inertia and products of inertia for
simple and composite elements using integration methods and transform theorem; calculate mass MI and radius of
gyration for regular and composite structures.

Learning Outcomes: After completing this unit, students would be able to:

1. To find centroids , centre of gravity and moment of inertia of different shapes and masses
2. To find the moment of inertia of different shapes and sizes which are later used in design of beams

UNIT IV

Objectives: Obtain displacement, velocity and acceleration relations of particles in rectilinear and curvilinear
motion including projectiles; write equations of motion under influence of forces for particles and connected bodies
and for plane motion of rigid bodies.

Learning Outcomes: After completing this unit, students would be able to:

1. To solve a problem of projectile


2. To analyze a problem with the inclusion of there velocities,acceleration.
UNIT V

Objectives: Apply Principles of work and energy to motion of particle or connected bodies to evaluate the
velocities and angular velocities of bodies in connected systems and involving plane motion and apply Principle of
conservation of Momentum and impulse force/moment to evaluate the velocities of a body after application of
force/moment, and of bodies in impact/collision considering Coefficient of Restitution.

Learning Outcomes: After completing this unit, students would be able to:

1. Solve problems of dynamics with the usage of work energy principal


2. Solve problems with correlation of force, mass and time

You might also like