You are on page 1of 81

Rosemount Tank Gauging Middle East SPC

P.O.Box 20048
Manama
Bahrain

T+973 17 22 66 10
F+973 17 22 77 71
www.rosemount-tg.com

Instruments Data Sheets


Product Data Sheet
January 2014
00813-0100-5900, Rev AA

Rosemount 5900S Radar Level Gauge


High Performance Level Measurement

 Provides highest certified custody transfer  Provides convenient and safe installation with
accuracy for precise monitoring of bulk liquid 2-wire IS bus power supply
assets
 Includes wired and/or wireless data
 Available with SIL 2 and SIL 3 certified safety transmission

 Enables redundant level measurement with  Suitable for all bulk storage tank types and
innovative 2-in-1 functionality products, ranging from liquefied gases, light
products, heavy fuel oil and bitumen
Rosemount 5900S January 2014

Improve measurement accuracy, plant efficiency and


safety
Highest level precision for your bulk
liquid storage tanks
The 5900S gauge with its 0.5 mm instrument accuracy reduces
level measurement uncertainty to a minimum. With increasing
crude oil and products prices the 5900S can enhance your
storage operation by providing:

 Certified custody transfer accuracy according to OIML and


other legal metrological authorities

 Better inventory management

 Reliable loss control data

The 5900S is normally combined with high precision multi-spot


temperature sensors for highest accuracy API standard net
volume calculations.

Make operations more efficient


 No moving parts gives increased reliability and fewer
interruptions

 Most 5900S antenna types are installed with the tanks in


operation

 Emerson Smart Wireless can drastically reduce installation


cost and give you access to remote tanks

 The 5900S is an integrated part of complete tank gauging


solutions from Emerson who has supplied tank gauging for
more than 100 000 bulk liquid storage tanks

Taking overfill safety to a higher level


 Innovative 2-in-1 feature with two radar gauges in one
housing for independent level and overfill measurement

 SIL 2 and SIL 3 certified safety according to IEC 61508-2 and


61508-3

 Enables API 2350 compliant solutions

Contents
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Product Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

2 www.rosemount-tg.com
January 2014 Rosemount 5900S

Get complete level and inventory information


The Rosemount 5900S is a premium non-contact radar level
gauge with custody transfer accuracy, suitable for tank Tankbus
terminals and refineries. It is normally integrated into a high 5900S
performance tank gauging system including average
temperature measurement for accurate net volume calculation.
Data is transmitted to the control room and displayed on a host
computer or the TankMaster inventory software package. TankMaster
2410 Tank PC
Hub
Using an Emerson Smart Wireless solution is an alternative that Rosemount TankRadar

Ext. pwr
RS-232
USB
On - TERM - Off

Rx
Tx
Lo - GAIN - Hi

saves installation cost for remotely located tanks and where long
FBM 2180

distance field wiring is obsolete.


The 5900S gauge is available with antenna options to suit all
bulk liquid storage applications and tank types (see pages 4, 7,
10 and 14).

Drip-off means no condensation


Since the antenna has an inclined polished PTFE surface where
microwaves are emitted, it will be less susceptible to condensed
water or product. Condensation drops will not coat the active
antenna part, so the radar signal remains strong, resulting in
higher accuracy and better reliability.

SIL safety functions


Rosemount 5900S is SIL 2 and SIL 3 certified for overfill
prevention.

5900S with SIL option activates a separate alarm loop at a preset


liquid level and triggers the safety relay output on the
Rosemount 2410 Tank Hub. The alarm signal can be connected
to an Emergency Shut-down System (ESD) / Automatic Overfill
Prevention System (AOPS).

SIL 2 requires one 5900S. SIL 3 is achieved with a 2-in-one


5900S. A Rosemount 2410 Tank Hub equipped with a SIL relay
output is also required for SIL safety.

2-in-1 gauge for cost-efficient level


measurement redundancy
The 5900S gauge can be delivered with two electronic units
integrated in the transmitter head.

The unique 2-in-1 solution gives you one primary and one
backup unit in a single level gauge, or one level gauge plus an
independent radar based High-High level alarm.

The 2-in-1 solution enables real-time delta verification by


configuring the transmitter to compare signals on both units.
Compared to having two separate gauges, the 2-in-1 solution 5900S with two galvanically separated gauges within the same housing
makes mechanical and electrical installation easier. (2-in-1 solution).

www.rosemount-tg.com 3
Rosemount 5900S January 2014

Ordering information
Rosemount 5900S Radar Level Gauge with parabolic antenna
Rosemount 5900S with parabolic antenna is a premium non-contact radar level gauge. It is
the first choice for installation on tanks with fixed roofs without a still-pipe. The parabolic
antenna can be installed on existing manhole covers and close to the tank wall due to the
narrow radar beam and high signal to noise ratio. In certain cases, it can be used on tanks
with floating roofs to measure the distance down to a target plate on the floating roof.

 Measures all products ranging from light products to heavy fuel oil, bitumen and asphalt

 Antenna design gives extreme tolerance to product build-up and condensation

 Custody transfer accuracy according to OIML R85:2008

 SIL 2 and SIL 3 certified according to IEC 61508-2 and 61508-3

 2-in-1 functionality available for redundant level measurement

 Communicates via a 2-wire, low voltage Tankbus for easy and safe installation

 Installation normally with tank in service

Table 1. 5900S Radar Level Gauge with parabolic antenna ordering information
Model Product Description
5900S Radar Level Gauge

Performance Class
P Premium: ±0.5 mm (0.020 in.) instrument accuracy

Safety Certification (SIS)


3(1) SIL 3 certification as per IEC 61508

2(2) SIL 2 certification as per IEC 61508

F None. Ready for upgrade of safety certification (SIS)

0 None

Redundancy
2 2-in-1; Independent radar level gauge electronics

F None. Ready for upgrade to 2-in-1

1 None. Single radar level gauge electronics

Tankbus: Power and Communication


F Bus powered 2-wire FOUNDATION™ fieldbus (IEC 61158)

4 www.rosemount-tg.com
January 2014 Rosemount 5900S

Table 1. 5900S Radar Level Gauge with parabolic antenna ordering information
Hazardous Location Certification
I1 ATEX Intrinsic Safety

I2 Brazil Inmetro Intrinsic Safety

I5 FM-US Intrinsic Safety

I6 FM-Canada Intrinsic Safety

I7 IECEx Intrinsic Safety

KA ATEX Intrinsic Safety+FM-US Intrinsic Safety

KC ATEX Intrinsic Safety+IECEx Intrinsic Safety

KD FM-US Intrinsic Safety+FM-Canada Intrinsic Safety

NA None

Custody Transfer Type Approval


R(3)(4) OIML R85 E performance certification

C(3)(4) PTB Eich

N(4)(5) NMi (the Netherlands W&M)

A(3)(4) CMI (Czech Republic W&M approval)

E(3)(4) TJA (Estonia W&M approval)

Y(3)(4) Justervesenet (Norway W&M approval)

M(4)(5) BMS (Belgium W&M approval)

W(3)(4) METAS (Switzerland W&M approval)

0 None

Radar Measurement Method


1 10 GHz FMCW radar technology

2 10 GHz FMCW radar technology for the US market

Housing
A Standard enclosure, polyurethane-covered aluminum. IP 66/67

Cable / Conduit Connections


1 ½ - 14 NPT, female thread. 1 plug included

2 M20 x 1.5 adapters, female thread. 2 adapters and 1 plug included


Metal cable glands (½ - 14 NPT). Min. temperature -20 °C (-4 °F). ATEX / IECEx Exe approved. 2 glands and 1 plug
G
included
E Eurofast male connector, 1 plug included

M Minifast male connector, 1 plug included

Antenna
1P Parabolic antenna

Antenna Size
F 20 in. / DN 500, Ø=440 mm (17.3 in.)

www.rosemount-tg.com 5
Rosemount 5900S January 2014

Table 1. 5900S Radar Level Gauge with parabolic antenna ordering information
Antenna Material
S Stainless steel (material type corresponding to AISI 316/316L and EN 1.4401 /1.4404)

Tank Seal
PF PTFE with FEP fluoropolymer o-ring

Tank Connection
WE(6) Welded installation

CL(6) Clamped/threaded installation

Special
0 None

Options (Include with selected model number)


QT(7) IEC 61508 certificate and FMEDA-data

Q4 Calibration certificate

S4 Calibration certificate, witnessed by factory selected accredited third party

Q8(8) Antenna material traceability certification per EN 10204 3.1

ST Engraved SST tag plate

P1 Antenna hydrostatic pressure testing

U1(9) TÜV/DIBt WHG approval for overfill protection

Typical Model Number: 5900S P 2 F F I5 R 2 A 1 1P F S PF WE 0 Q4

(1) Requires Redundancy code 2 and Rosemount 2410 Tank Hub with Relay Output (SIS/SIL) code 3. Alarm if one of the two gauges is in alarm mode.

(2) Requires Rosemount 2410 Tank Hub with Relay Output (SIS/SIL) code 2.

(3) Requires Options code Q4.

(4) Requires Rosemount 2410 Tank Hub with the corresponding Custody Transfer Type Approval. Integral 2410 display or Rosemount 2230 display or TankMaster
required.

(5) Requires Options code S4

(6) Flange not included.

(7) Requires Safety Certification (SIS) code 2 or 3.

(8) Certificate includes all pressure retaining wetted parts.

(9) Requires one or more relay outputs in the Rosemount 2410 Tank Hub.

6 www.rosemount-tg.com
January 2014 Rosemount 5900S

Rosemount 5900S radar level gauge with horn antenna


Rosemount 5900S with horn antenna is a non-contact radar level gauge. It is designed for
easy installation on fixed roofs tanks, with smaller nozzles, down to 200 mm
(8 in.).

 Measures on a variety of products except asphalt or similar for which the parabolic
antenna is recommended

 Custody transfer accuracy according to OIML R85:2008

 SIL 2 and SIL 3 certified according to IEC 61508-2 and 61508-3

 2-in-1 functionality available for redundant level measurement

 Communicates via a 2-wire, low voltage Tankbus for easy and safe installation

 Installation normally with tank in service

Table 2. 5900S Radar Level Gauge with horn antenna ordering information
Model Product Description
5900S Radar Level Gauge

Performance Class
P Premium: ±0.5 mm (0.020 in.) instrument accuracy

Safety Certification (SIS)


3(1) SIL 3 certification as per IEC 61508

2(2) SIL 2 certification as per IEC 61508

F None. Ready for upgrade of safety certification (SIS)

0 None

Redundancy
2 2-in-1; Independent radar level gauge electronics

F None. Ready for upgrade to 2-in-1

1 None. Single radar level gauge electronics

Tankbus: Power and Communication


F Bus powered 2-wire FOUNDATION™ fieldbus (IEC 61158)

www.rosemount-tg.com 7
Rosemount 5900S January 2014

Table 2. 5900S Radar Level Gauge with horn antenna ordering information
Hazardous Location Certification
I1 ATEX Intrinsic Safety

I2 Brazil Inmetro Intrinsic Safety

I5 FM-US Intrinsic Safety

I6 FM-Canada Intrinsic Safety

I7 IECEx Intrinsic Safety

KA ATEX Intrinsic Safety+FM-US Intrinsic Safety

KC ATEX Intrinsic Safety+IECEx Intrinsic Safety

KD FM-US Intrinsic Safety+FM-Canada Intrinsic Safety

NA None

Custody Transfer Type Approval


R(3)(4) OIML R85 E performance certification

C(3)(4) PTB Eich

N(4)(5) NMi (the Netherlands W&M)

A(3)(4) CMI (Czech Republic W&M approval)

E(3)(4) TJA (Estonia W&M approval)

Y(3)(4) Justervesenet (Norway W&M approval)

M(4)(5) BMS (Belgium W&M approval)

W(3)(4) METAS (Switzerland W&M approval)

0 None

Radar Measurement Method


1 10 GHz FMCW radar technology

2 10 GHz FMCW radar technology for the US market

Housing
A Standard enclosure, polyurethane-covered aluminum. IP 66/67

Cable / Conduit Connections


1 ½ - 14 NPT, female thread. 1 plug included

2 M20 x 1.5 adapters, female thread. 2 adapters and 1 plug included


Metal cable glands (½ - 14 NPT). Min. temperature -20 °C (-4 °F). ATEX / IECEx Exe approved. 2 glands and 1 plug
G
included
E Eurofast male connector, 1 plug included

M Minifast male connector, 1 plug included

Antenna
1H Horn antenna

Antenna Size
8 8 in. / DN 200, Ø=175 mm (6.9 in.)

8 www.rosemount-tg.com
January 2014 Rosemount 5900S

Table 2. 5900S Radar Level Gauge with horn antenna ordering information
Antenna Material
S Stainless steel (material type corresponding to AISI 316/316L and EN 1.4401 /1.4404)

Tank Seal
PV PTFE with Viton® fluoroelastomer o-ring

Tank Connection
ANSI Hole Pattern (SST AISI 316 / 316 L)-Flat Faced
8A 8 in. Class 150

8Z 8 in. Class 150, 4° inclined

EN Hole Pattern (SST EN 1.4401 / 1.4404)-Flat Faced


LA DN 200 / PN 10

LZ DN 200 / PN 10, 4° inclined

Special
0 None

Options (Include with selected model number)


QT(6) IEC 61508 certificate and FMEDA-data

Q4 Calibration certificate

S4 Calibration certificate, witnessed by factory selected accredited third party

Q8(7) Antenna material traceability certification per EN 10204 3.1

ST Engraved SST tag plate

P1 Antenna hydrostatic pressure testing

U1(8) TÜV/DIBt WHG approval for overfill protection

Typical Model Number: 5900S P F 2 F I5 R 2 A G 1H 8 S PV 8Z 0 ST

(1) Requires Redundancy code 2 and Rosemount 2410 Tank Hub with Relay Output (SIS/SIL) code 3. Alarm if one of the two gauges is in alarm mode.

(2) Requires Rosemount 2410 with Relay Output (SIS/SIL) code 2.

(3) Requires Options code Q4.

(4) Requires Rosemount 2410 Tank Hub with the corresponding Custody Transfer Type Approval. Integral 2410 display or Rosemount 2230 display or TankMaster
required.

(5) Requires Options code S4

(6) Requires Safety Certification (SIS) code 2 or 3.

(7) Certificate includes all pressure retaining wetted parts.

(8) Requires one or more relay outputs in the Rosemount 2410 Tank Hub.

www.rosemount-tg.com 9
Rosemount 5900S January 2014

Rosemount 5900S radar level gauge with still-pipe array antenna


The Rosemount 5900S with array antenna is a premium non-contact radar level gauge for
still-pipe measurement, available in two versions, Fixed and Hinged Hatch.
Typical applications are crude oil tanks with floating roofs and gasoline/product tanks with
or without inner floating roofs.

 Suitable for crude oil, gasoline or similar products

 Custody transfer accuracy according to OIML R85:2008

 SIL 2 and SIL 3 certified according to IEC 61508-2 and 61508-3

 2-in-1 functionality available for redundant level measurement

 Tolerant against rust and product deposits inside the pipe

 Communicates via a 2-wire, low voltage Tankbus for easy and safe installation

 Hinged hatch version enables easier product sampling and hand-dips

 Installation normally with tank in service

Table 3. 5900S Radar Level Gauge with still-pipe array antenna ordering information
Model Product Description
5900S Radar Level Gauge

Performance Class
P Premium: ±0.5 mm (0.020 in.) instrument accuracy

Safety Certification (SIS)


3(1) SIL 3 certification as per IEC 61508

2(2) SIL 2 certification as per IEC 61508

F None. Ready for upgrade of safety certification (SIS)

0 None

Redundancy
2 2-in-1; Independent radar level gauge electronics

F None. Ready for upgrade to 2-in-1

1 None. Single radar level gauge electronics

Tankbus: Power and Communication


F Bus powered 2-wire FOUNDATION™ fieldbus (IEC 61158)

10 www.rosemount-tg.com
January 2014 Rosemount 5900S

Table 3. 5900S Radar Level Gauge with still-pipe array antenna ordering information
Hazardous Location Certification
I1 ATEX Intrinsic Safety

I2 Brazil Inmetro Intrinsic Safety

I5 FM-US Intrinsic Safety

I6 FM-Canada Intrinsic Safety

I7 IECEx Intrinsic Safety

KA ATEX Intrinsic Safety+FM-US Intrinsic Safety

KC ATEX Intrinsic Safety+IECEx Intrinsic Safety

KD FM-US Intrinsic Safety+FM-Canada Intrinsic Safety

NA None

Custody Transfer Type Approval


R(3)(4) OIML R85 E performance certification

C(3)(4) PTB Eich

N(4)(5) NMi (the Netherlands W&M)

A(3)(4) CMI (Czech Republic W&M approval)

E(3)(4) TJA (Estonia W&M approval)

Y(3)(4) Justervesenet (Norway W&M approval)

M(4)(5) BMS (Belgium W&M approval)

W(3)(4) METAS (Switzerland W&M approval)

0 None

Radar Measurement Method


1 10 GHz FMCW radar technology

2 10 GHz FMCW radar technology for the US market

Housing
A Standard enclosure, polyurethane-covered aluminum. IP 66/67

Cable / Conduit Connections


1 ½ - 14 NPT, female thread. 1 plug included

2 M20 x 1.5 adapters, female thread. 2 adapters and 1 plug included


Metal cable glands (½ - 14 NPT). Min. temperature -20 °C (-4 °F). ATEX / IECEx Exe approved. 2 glands and 1 plug
G
included
E Eurofast male connector, 1 plug included

M Minifast male connector, 1 plug included

Antenna
1A Still-pipe array antenna

www.rosemount-tg.com 11
Rosemount 5900S January 2014

Table 3. 5900S Radar Level Gauge with still-pipe array antenna ordering information
Antenna Size
5 5 in. / DN 125, Ø=120 mm (4.7 in.)

6 6 in. / DN 150, Ø=145 mm (5.7 in.)

8 8 in. / DN 200, Ø=189 mm (7.4 in.)

A 10 in. / DN 250, Ø=243 mm (9.8 in.)

B 12 in. / DN 300, Ø=293 mm (11.8 in.)

Antenna Material
S Stainless steel (AISI 316L / EN 1.4404) and PPS (Polyphenylene sulfide)

Tank Seal
FF Fixed flange installation with fluorosilicone o-ring

HH Integrated hatch installation with fluorosilicone o-ring

Tank Connection
ANSI Hole Pattern (SST AISI 316 / 316 L)-Flat Faced
5A 5 in. Class 150

6A 6 in. Class 150

8A 8 in. Class 150

AA 10 in. Class 150

BA 12 in. Class 150

EN Hole Pattern (SST EN 1.4401 / 1.4404)-Flat Faced


KA DN 150 PN 16

LA DN 200 PN 10

MB DN 250 PN 16

Special
0 None

C Clamp flange in galvanized steel (for still-pipes without a flange). Same size as tank connection

Options (Include with selected model number)


QT(6) IEC 61508 certificate and FMEDA-data

Q4 Calibration certificate

S4 Calibration certificate, witnessed by factory selected accredited third party

Q8(7) Antenna material traceability certification per EN 10204 3.1

ST Engraved SST tag plate

P1 Antenna hydrostatic pressure testing

U1(8) TÜV/DIBt WHG approval for overfill protection

Typical Model Number: 5900S P F 1 F I5 R 2 A 1 1A 5 S FF AA C Q4

(1) Requires Redundancy code 2 and Rosemount 2410 Tank Hub with Relay Output (SIS/SIL) code 3. Alarm if one of the two gauges is in alarm mode.

12 www.rosemount-tg.com
January 2014 Rosemount 5900S

(2) Requires Rosemount 2410 Tank Hub with Relay Output (SIS/SIL) code 2.

(3) Requires Options code Q4.

(4) Requires Rosemount 2410 Tank Hub with the corresponding Custody Transfer Type Approval. Integral 2410 display or Rosemount 2230 display or TankMaster
required.

(5) Requires Options code S4

(6) Requires Safety Certification (SIS) code 2 or 3.

(7) Certificate includes all pressure retaining wetted parts.

(8) Requires one or more relay outputs in the Rosemount 2410 Tank Hub.

www.rosemount-tg.com 13
Rosemount 5900S January 2014

Rosemount 5900S radar level gauge with LPG/LNG antenna


The Rosemount 5900S with LPG/LNG antenna is a premium non-contact radar level gauge
for measurement on pressurized or cryogenic liquefied gas. Radar signals are transmitted
inside the still-pipe which enables the gauge to have a sufficiently strong echo even under
surface boiling conditions.

 Custody transfer accuracy according to OIML R85:2008

 SIL 2 and SIL 3 certified according to IEC 61508-2 and 61508-3

 2-in-1 functionality available for redundant level measurement

 Reference device function enables measurement verification with the tank in service

 Communicates via a 2-wire, low voltage Tankbus for easy and safe installation

 Built-in pressure sensor for vapor compensation gives best measurement performance

 Integrated ball valve

Table 4. 5900S Radar Level Gauge with LPG/LNG antenna ordering information
Model Product Description
5900S Radar Level Gauge

Performance Class
P Premium: ±0.5 mm (0.020 in.) instrument accuracy

Safety Certification (SIS)


3(1) SIL 3 certification as per IEC 61508

2(2) SIL 2 certification as per IEC 61508

F None. Ready for upgrade of safety certification (SIS)

0 None

Redundancy
2 2-in-1; Independent radar level gauge electronics

F None. Ready for upgrade to 2-in-1

1 None. Single radar level gauge electronics

Tankbus: Power and Communication


F Bus powered 2-wire FOUNDATION™ fieldbus (IEC 61158)

14 www.rosemount-tg.com
January 2014 Rosemount 5900S

Table 4. 5900S Radar Level Gauge with LPG/LNG antenna ordering information
Hazardous Location Certification
I1 ATEX Intrinsic Safety

I2 Brazil Inmetro Intrinsic Safety

I5 FM-US Intrinsic Safety

I6 FM-Canada Intrinsic Safety

I7 IECEx Intrinsic Safety

NA None

Custody Transfer Type Approval


R(3)(4) OIML R85 E performance certification

C(3)(4) PTB Eich

N(4)(5) NMi (the Netherlands W&M)

A(3)(4) CMI (Czech Republic W&M approval)

E(3)(4) TJA (Estonia W&M approval)

Y(3)(4) Justervesenet (Norway W&M approval)

M(4)(5) BMS (Belgium W&M approval)

W(3)(4) METAS (Switzerland W&M approval)

0 None

Radar Measurement Method


1 10 GHz FMCW radar technology

2 10 GHz FMCW radar technology for the US market

Housing
A Standard enclosure, polyurethane-covered aluminum. IP 66/67

www.rosemount-tg.com 15
Rosemount 5900S January 2014

Table 4. 5900S Radar Level Gauge with LPG/LNG antenna ordering information
Cable / Conduit Connections
1 ½ - 14 NPT, female thread. 1 plug included

2 M20 x 1.5 adapters, female thread. 2 adapters and 1 plug included


Metal cable glands (½ - 14 NPT). Min. temperature -20 °C (-4 °F). ATEX / IECEx Exe approved. 2 glands and 1 plug
G
included
E Eurofast male connector, 1 plug included

M Minifast male connector, 1 plug included

Antenna
G1(6) LNG still-pipe antenna

G2(7) LPG still-pipe antenna

Antenna Size
A 4 in. Schedule 10, Ø=107 mm (4.2 in.)

B 4 in. Schedule 40, Ø=101 mm (4.0 in.)

D DN 100, Ø=99 mm (3.9 in.)

Antenna Material
S Stainless steel (material type corresponding to AISI 316/316L and EN 1.4401 /1.4404)

Tank Seal
QA Quartz sealing

Tank Connection
ANSI Flanges (SST AISI 316 L)-Raised Face
4A 4 in. Class 150

4B 4 in. Class 300

6A 6 in. Class 150

6B 6 in. Class 300

8A 8 in. Class 150

8B 8 in. Class 300

Special
0 None

V Measurement verification kit with 1 verification pin and 1 pipe end deflector kit

16 www.rosemount-tg.com
January 2014 Rosemount 5900S

Table 4. 5900S Radar Level Gauge with LPG/LNG antenna ordering information
Options (Include with selected model number)
QT(8) IEC 61508 certificate and FMEDA-data

Q4 Calibration certificate

S4 Calibration certificate, witnessed by factory selected accredited third party

Q8(9) Antenna material traceability certification per EN 10204 3.1

ST Engraved SST tag plate

P1 Antenna hydrostatic pressure testing

U1(10) TÜV/DIBt WHG approval for overfill protection

Typical Model Number: 5900S P F 2 F I5 R 2 A M G1 B S QA 4A V Q4

(1) Requires Redundancy code 2 and Rosemount 2410 Tank Hub with Relay Output (SIS/SIL) code 3. Alarm if one of the two gauges is in alarm mode.

(2) Requires Rosemount 2410 Tank Hub with Relay Output (SIS/SIL) code 2.

(3) Requires Options code Q4.

(4) Requires Rosemount 2410 Tank Hub with the corresponding Custody Transfer Type Approval. Integral 2410 display or Rosemount 2230 display or TankMaster
required.

(5) Requires Options code S4

(6) Including integrated ball valve.

(7) Including integrated ball valve and pressure transmitter.

(8) Requires Safety Certification (SIS) code 2 or 3.

(9) Certificate includes all pressure retaining wetted parts.

(10) Requires one or more relay outputs in the Rosemount 2410 Tank Hub.

www.rosemount-tg.com 17
Rosemount 5900S January 2014

Specifications
Instrument accuracy(1) Communication / Display /
± 0.5 mm (0.020 in.)
Configuration
Temperature stability
Output variables and units
Typically < ± 0.5 mm (0.020 in.) in -40 to +70 °C (-40 to +158 °F)
 Level, and ullage: meter, centimeter, millimeter, feet, or inch
Fieldbus (standard)  Level rate: meter/second, meter/hour, feet/second, feet/hour,
FOUNDATATION™ fieldbus FISCO (Tankbus) inch/minute
 Signal strength: mV
Update time
New measurement every 0.3 s Configuration tools
Rosemount TankMaster WinSetup, Field Communicator
Repeatability
0.2 mm (0.008 in.) FOUNDATION™ fieldbus characteristics
Maximum level rate
Polarity sensitive
Up to 200 mm/s
No
Metrology sealing possibility
Quiescent current draw
Yes
51 mA
Installation considerations
Lift-off minimum voltage
See Rosemount 5900S Reference Manual
9.0 VDC
Measurement principle
Device capacitance / inductance
The FMCW-method (Frequency Modulated Continuous Wave) See Product Certification on page 23
means that the transmitted radar signal has a linear frequency
variation around 10 GHz. The reflection from the liquid surface Class (Basic or Link Master)
has a slightly different frequency compared with the signal Link Master (LAS)
transmitted from the antenna when the reflection is received.
The difference in frequency is directly proportional to the Number of available VCRs
distance between the antenna and the liquid surface, and Maximum 20, including one fixed
thereby also the liquid level. This technology enables a very
accurate and stable measured value.
Links
Maximum 40

Frequency, f (GHz) Minimum slot time / maximum response delay/


minimum intermessage delay
8/5/8

f0
f
f1

t0 f d=Distance Time, t (s)

The FMCW-method is based on a radar sweep with varying frequency.

(1) Instrument accuracy is under reference conditions. Reference conditions are: Measurement in test bench at Rosemount Tank Radar AB in Göteborg Sweden. Test
bench is calibrated minimum yearly by an accredited laboratory (SP Technical Research Institute of Sweden. Measuring range is up to 30 m (98 ft). Ambient
temperature and humidity is close to constant during tests. Total uncertainty in test bench is below 0.15 mm (0.006 in.).

18 www.rosemount-tg.com
January 2014 Rosemount 5900S

Blocks and Execution time Mechanical


1 Resource block.
5 Transducer blocks (Level, Register, Adv_Config, Volume, and Housing material & surface treatment
LPG). Polyurethane-coated die-cast aluminum
6 Analog Input (AI) blocks: 10 ms, 2 Analog Output (AO) blocks:
10 ms. Cable entry (connection/glands)
1 Proportional/Integral/Derivate (PID) block: 15 ms Two ½ - 14 NPT entries for cable glands or conduits. One metal
1 Signal Characterizer (SGCR) block: 10 ms, 1 Integrator (INT) plug to seal any unused port is enclosed in the transmitter
block: 10 ms, delivery.
1 Arithmetic (ARTH) block: 10 ms, 1 Input Selector (ISEL) block: Optional:
10 ms.  M20 x 1.5 conduit / cable adapter
1 Control Selector (CS) block: 10 ms, 1 Output Splitter (OS)
 Cable glands in metal (½ - 14 NPT)
block: 10 ms.
 4-pin male Eurofast connector or A size Mini 4-pin male
For more information, see the FOUNDATION™ fieldbus Blocks
manual (document number 00809-0100-4783). Minifast connector

Instantiation Total weight


Yes  5900S transmitter head: 5.1 kg (11.2 lbs) for the single
version and 5.4 kg (11.9 lbs) for the 2-in-1 version
Conforming FOUNDATION™ fieldbus
 5900S with horn antenna: Appr. 12 kg (26 lbs)
ITK 5.2
 5900S with parabolic antenna: Appr. 17 kg (37 lbs)
PlantWeb alert support  5900S with still-pipe array antenna: Appr. 13.5-24 kg (30-53
Yes lbs)
 5900S with LPG/LNG antenna: Appr. 30 kg (66 lbs) for 6-in.
Action support wizards 150 psi, and 40 kg (88 lbs) for 6-in. 300 psi
Restart measurement, write protect device, factory reset -
measurement configuration, start/stop device simulation, set as Antennas
surface, reset statistics, change all modes, register/remove false The 5900S antennas have a drip-off design which for some
echo, refresh echo peaks, pin verification, change vapor versions also include inclined polished PTFE surfaces.
pressure, change vapor temperature. Condensation on the antenna is minimized, and the radar signal
Advanced diagnostics remains strong. This results in maintenance free operation, high
accuracy and reliability. There is always a suitable antenna for
Software, memory/database, electronics, internal
communication, simulation, level correction, level every tank type, tank opening and application.
measurement, ambient temperature, vapor Transmitter head
pressure/temperature correction, LPG verification pin, and
manual measurement values. The same transmitter head is used for all 5900S antenna types,
minimizing spare part requirements:
Electric  The dual compartment transmitter housing, with electronics
Tankbus cabling and cabling separated, can be replaced without opening the
0.5-1.5 mm2 (AWG 22-16), twisted shielded pairs tank

Power supply  It is protected against lightning, moisture/rain, and has a


FISCO: 9.0 - 17.5 VDC polarity insensitive (for example from surface protection against sulphur and salt spray atmospheres
2410 Tank Hub)
Entity: 9.0 - 30.0 VDC polarity insensitive  Electronics consists of one or two encapsulated units.
The 2-in-1 solution has duplicate, galvanically isolated
Bus current draw electronic units in the same housing
50 mA (100 mA for the 2-in-1 version)
To achieve highest precision, 5900S has an on-line adjustment
Microwave output power of transmitter frequency. It uses a crystal oscillator to control
< 1 mW the output frequency. This is one of the reasons why there is no
need for gauge re-calibration.

www.rosemount-tg.com 19
Rosemount 5900S January 2014

Environment Separation
Galvanically separated gauge electronics, and shared antenna
Ambient operating temperature for the two units
-40 to +70 °C (-40 to +158 °F). Minimum start-up temperature is
-50 °C (-58 °F) Wiring
Separated or common
Storage temperature
-50 to +85 °C (-58 to +185 °F) Tank hub connection
 Connection of both units to one hub, or
Humidity  Separate connection of units to two different hubs
0-100% relative humidity
Built-in Tankbus terminator
Ingress protection Single Tankbus connection: Yes (to be connected if required).
IP 66/67 and Nema 4X Dual Tankbus connection: Possible to terminate the primary
Tankbus.
Vibration resistance
IEC 60770-1 level 1 and IACS UR E10 test 7 Daisy chain possibility
No
Telecommunication (FCC and R&TTE)
Compliance with: 5900S SIL version
 FCC 15B Class A, and 15C
 R&TTE directive 99/5/EC, EN 302 372:2006, and Separation
EN50731:2002 Galvanically separated gauge electronics, and shared antenna
 ETSI (EN 302 372-1 V.1.1.1) for the SIL 3 version
 IC (RSS210-5)
Built-in Tankbus terminator
Electromagnetic compatibility No
 EMC directive 2004/108/EC, and EN61326-3-1 Daisy chain possibility
 OIML R85:2008
No
Transient / built-in lightning protection Electric properties for intrinsically safe alarm
According to IEC 61000-4-5, level 2 kV line to ground. Complies
with IEEE 587 Category B transient protection and IEEE 472
signal
surge protection. 12.5 VDC, 1-2 mA for normal condition (no alarm)

Pressure Equipment Directive (PED) Wiring


97/23/EC  Additional separate 2-wire cable for alarm or
 A single cable incorporating two 2-wire cables (alarm and
5900S standard version level)

Built-in Tankbus terminator For cable specification, see page 19.


Yes (to be connected if required)

Daisy chain possibility


Yes

5900S 2-in-1 version


Instrument accuracy(1)
± 0.5 mm (0.020 in.)(2)

(1) Instrument accuracy is under reference conditions. Reference conditions are: Measurement in test bench at Rosemount Tank Radar AB in Göteborg Sweden. Test
bench is calibrated minimum yearly by an accredited laboratory (SP Technical Research Institute of Sweden. Measuring range is up to 30 m (98 ft). Ambient
temperature and humidity is close to constant during tests. Total uncertainty in test bench is below 0.15 mm (0.006 in.).

(2) Some degradation of accuracy may be expected on the secondary unit.

20 www.rosemount-tg.com
January 2014 Rosemount 5900S

5900S with parabolic antenna 5900S with horn antenna


Operating temperature in tank Operating temperature in tank
Max. +230 °C (+445 °F) Max. +230 °C (+445 °F)

Measuring range Measuring range


0.8 to 30 m (2.6 to 100 ft) below flange. 0.8 to 20 m (2.6 to 65 ft) below flange.
Possibility to measure 0.5 to 50 m (1.6 to 164 ft). Accuracy may Possibility to measure 0.5 to 30 m (1.6 to 100 ft).
be reduced. For longer measuring range, please consult your Accuracy may be reduced.
local representative.
Pressure range
Pressure range -0.2 to 2 bar (-2.9 to 29 psig)
Clamped/threaded: -0.2 to 0.2 bar (-2.9 to 2.9 psig)
Welded: -0.2 to 10 bar (-2.9 to 145 psig) Material exposed to tank atmosphere
Antenna and flange: material corresponds to AISI 316/316L and
Material exposed to tank atmosphere EN 1.4401 /1.4404.
Antenna: material corresponds to AISI 316/316L and Sealing: PTFE
EN 1.4401 /1.4404. O-ring: Viton® fluoroelastomer
Sealing: PTFE
O-ring: FEP fluoropolymer Antenna dimension
175 mm (7 in.)
Antenna dimension
440 mm (17 in.)Manway size and Installation Nozzle diameter
500 mm (20-in.) opening. Minimum 200 mm (8 in.)

The parabolic antenna is installed on the manway cover by using Tank connection
the flange ball. It is designed for easy adjustment of the antenna 8 in. hole pattern according to ANSI 8 in.
Class 150 / DN 200 PN 10.
inclination and orientation within the specified limits.
The flange can be horizontal or 4° inclined for installation close
The flexible flange ball can be installed on both horizontal or to the tank wall.
inclined manways without any special arrangements.
The horizontal flange is used when highest accuracy and
Tank connection reliability is required. The 4° inclined version can be used to
The gauge is clamped in a 96 mm (3.78 in.) diameter hole, or maintain high accuracy when the gauge is installed close to the
welded in a 117 mm (4.61 in.) diameter hole tank wall.
Other flanges are available on request.

www.rosemount-tg.com 21
Rosemount 5900S January 2014

5900S with still-pipe array antenna 5900S with LPG/LNG antenna


Operating temperature in tank Operating temperature at ball valve
-40 to 120 °C (-40 to 248 °F) -55 to 90 °C (-67 to 194 °F)

Measuring range Operating temperature in tank


0.8 to 30 m (2.6 to 100 ft) below flange. -170 to 90 °C (-274 to 194 °F)
Possibility to measure 0.5 to 40 m (1.6 to130 ft). Accuracy may
be reduced. For longer measuring range, please consult your Measuring range
local representative. 1.2 to 30 m (3.9 to 100 ft) below flange.
Possibility to measure 0.8 to 60 m (2.6 to 200 ft). Accuracy may
Pressure range be reduced. For longer measuring range, please consult your
Fixed version: -0.2 to 2 bar (-2.9 to 29 psig) at 20 °C. local representative.
Hinged hatch version: -0.2 to 0.5 bar (-2.9 to 7.2 psig) for 5 to
8-in. pipes. Pressure range
-0.2 to 0.25 bar (-2.9 to 3.6 psig) for 10 and 12-in. pipes. -1 to 25 bar (-14.5 to 365 psig).
Note! Flanges may have higher pressure rating than 25 bar, but
Material exposed to tank atmosphere maximum tank pressure is still 25 bar.
Antenna: Polyphenylenesulphide (PPS)
Sealing: PTFE Pressure sensor (option)
O-ring: Fluorosilicone Rosemount 2051. It is available with various hazardous location
Flange: material corresponds to AISI 316/316L and certifications, see page 25.
EN 1.4401 /1.4404 For more information see the 2051 Product Data Sheet
(document number 00813-0100-4101).
Still-pipe dimensions
Material exposed to tank atmosphere
5-, 6-, 8-, 10- or 12 in.
Antenna and flange: material corresponds to AISI 316/316L and
Tank connection EN 1.4401 /1.4404.
Sealing: Quartz and PTFE
8 in. hole pattern according to ANSI 8 in.
Class 150 / DN 200 PN 10 Still-pipe dimension compatibility
Antenna choices for 4-in. sch. 10, 4-in. sch 40, or 100 mm (99
Low Loss Mode mm inner diameter) still-pipe dimensions
To get the accuracy, required for custody transfer bulk liquid
storage applications, the antenna uses Low Loss Mode Flange size & rating
technology, invented for Rosemount Tank Gauging products, to 4 in. class 150/300
transmit radar waves in the still-pipe center. 6 in. class 150/300
8 in. class 150/300
This virtually eliminates signal and accuracy degradation due to
Pressure seal
rust and product deposits inside the still-pipe.
The pressure seal includes a double-block function, consisting of
a quartz/ceramic window and a fire-proof ball valve. A pressure
sensor enables correction due to vapor for best measurement
performance.

Verification possibility
A patented reference device function enables measurement
verification with the tank in service. A verification pin mounted
in a still-pipe hole, and a deflection plate with a verification ring
at the lower still-pipe end provide reference echoes at fixed
pre-defined distances.

22 www.rosemount-tg.com
January 2014 Rosemount 5900S

Product Certifications
OIML R85:2008 Accuracy Certification Hazardous Location Certificates
The OIML metrology certificate, issued by the SP Technical
Research Institute of Sweden, covers the Rosemount Tank European ATEX Directive Information
Gauging system, including the level gauges equipped with
different antennas. EC-Type Examination Certificate Number: FM09ATEX0057X
Certificate number is R85/2008-SE-11.01. Control Drawing: 9240 040-917

I1(1) Intrinsically Safe:

FISCO Field Device:


II 1/2 G
0682
0575

Ex ia IIC T4 (-50 °C<Ta<+80 °C)


For each channel: Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W,
National Metrological Approvals Ci=1.1 nF, Li=1.5 μH.
Other national legal custody transfer certifications like PTB, MNi
etc are available (see “Ordering information” on page 4). Entity:
II 1 G
0682
0575

CE-mark Ex ia IIC T4 (-50 °C<Ta<+80 °C)


For each channel: Ui=30 VDC, Ii=300 mA, Pi=1.3 W,
93/68/EEC: complies with applicable EU directives (EMC,
Ci=1.1 nF, Li=1.5 μH.
ATEX,LVD, and R&TTE). Based on the low emitted effects from
the gauges (below 0.1 mW) compared to limits given by the Rec.
1999/519/EC, no additional measures are needed. SPECIAL CONDITIONS FOR SAFE USE (X-MARKING):
The enclosure contains aluminum and is considered to present a
Ordinary Location Certification potential risk of ignition by impact or friction. Care must be
Complies with FM 3810:2005 and CSA: C22.2 No. 1010.1 taken during installation and use to prevent impact or friction.

SIL Certification Parabolic and Array antennas with plastic surfaces and the
The SIL safety certificate, issued by exida in Switzerland, includes painted surface of the enclosure may, under certain extreme
the SIL alarm channel within the 5900S radar level gauge and the conditions, generate an ignition-capable level of electrostatic
2410 Tank Hub. Both units are SIL 2 and SIL 3 capable according charge for IIC applications. Therefore, when these antennas are
to IEC 61508, parts 1-7. used in Category 1G, Group IIC, appropriate measures must be
Certificate number is Rosemount 091243 P0017 C001. taken to prevent electrostatic discharge.

German WHG Certification


The certificate for the 5900S radar level gauge and the 2410
Tank Hub is issued by DIBt (Deutsches Institut für Bautechnik)
according to the German WHG regulations for overfill
prevention. It is based on technical evaluation and testing
conducted by TÜV NORD CERT GmbH.
Certificate number is Z-65.16-500.

(1) Ordering Information code for Product Certificates.

www.rosemount-tg.com 23
Rosemount 5900S January 2014

US Factory Mutual (FM-US) Certification Canadian Factory Mutual (FM-C) Certification

Certificate of Compliance: 3035466 Certificate of Compliance: 3035466C


Control Drawing: 9240 040-917 Control Drawing: 9240 040-917
I5(1) Intrinsically Safe
I6(1) Intrinsically Safe
FISCO Field Device:
Intrinsically safe for Class 1, Division 1, Groups A, B, C, FISCO Field Device:
and D Intrinsically safe for Class 1, Division 1, Groups A, B, C,
and D
For each channel: Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W,
For each channel: Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W,
Ci=1.1 nF, Li=1.5 µH
Ci=1.1 nF, Li=1.5 µH
Entity:
Entity:
Intrinsically safe for Class 1, Division 1, Groups A, B, C, Intrinsically safe for Class 1, Division 1, Groups A, B, C,
and D and D
For each channel: Ui=30 VDC, Ii=300 mA, Pi=1.3 W, For each channel: Ui=30 VDC, Ii=300 mA, Pi=1.3 W,
Ci=1.1 nF, Li=1.5 µH Ci=1.1 nF, Li=1.5 µH
Dust ignition proof for Class II/III, Division 1, Groups E, F, Dust ignition proof for Class II/III, Division 1, Groups E, F,
and G. and G.
Temperature Code T4. Temperature Code T4.
Ambient Temperature Limits: -50 to +80 °C Ambient Temperature Limits: -50 to +80 °C

IECEx Certification
SPECIAL CONDITIONS OF USE
Parabolic and Array antennas with plastic surfaces and the
Certificate of Conformity Number: IECEx FMG 09.0009X
painted surface of the enclosure may, under certain extreme
conditions, generate an ignition-capable level of electrostatic Control Drawing: 9240 040-917
charge. Appropriate measures must be taken to prevent
electrostatic discharge. I7(1) Intrinsically Safe

FISCO Field Device:


Ex ia IIC T4 Ga/Gb (-50 °C<Ta<+80 °C)
For each channel: Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W,
Ci=1.1 nF, Li=1.5 µH.

Entity:
Ga Ex ia IIC T4 (-50 °C<Ta<+80 °C)
For each channel: Ui=30 VDC, Ii=300 mA, Pi=1.3 W,
Ci=1.1 nF, Li=1.5 µH.

SPECIAL CONDITIONS OF CERTIFICATION (X-MARKING)


The enclosure contains aluminum and is considered to present a
potential risk of ignition by impact or friction. Care must be
taken during installation and use to prevent impact or friction.

Parabolic and Array antennas with plastic surfaces and the


painted surface of the enclosure may, under certain extreme
conditions, generate an ignition-capable level of electrostatic
charge for IIC applications. Therefore, when these antennas are
used in Category EPL Ga, Group IIC, appropriate measures must
be taken to prevent electrostatic discharge.

(1) Ordering Information code for Product Certificates,

24 www.rosemount-tg.com
January 2014 Rosemount 5900S

Combination Approvals IECEx Certification


The radar level gauge can be ordered with dual certifications IA(1) FISCO Intrinsic Safety
(indicated at the main label). The following combinations are Certification No. IECExBAS08.0045X II 1 G
possible: Ex ia IIC T4 (Tamb = –60 to +60 °C)
IP66
KA=I1+I5 (ATEX + FM-US) 1180
KC=I1+I7 (ATEX +IECEx) Input Parameters: Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W,
KD=I5+I6 (FM-US+FM-C) Ci ≤5 µF, Li=10 µH.

For more information on product certificates, refer to the SPECIAL CONDITIONS FOR SAFE USE (X):
Rosemount 5900S Reference Manual (document number The device is not capable of withstanding the 500V insulation test
required by Clause 6.3.12 of EN60079-11.
300520EN).
This must be taken into account when installing the apparatus.

Product Certifications Rosemount 2051

European ATEX Directive Information

IA(1) FISCO Intrinsic Safety

Certification No. Baseefa08ATEX0129X II 1 G


Ex ia IIC T4 (Tamb = –60 to +60 °C)
IP66
1180
Input Parameters: Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W,
Ci ≤5 µF, Li=10 µH.

SPECIAL CONDITIONS FOR SAFE USE (X):


The device is not capable of withstanding the 500V insulation test
required by Clause 6.3.12 of EN60079-11.
This must be taken into account when installing the apparatus.

US Factory Mutual (FM-US) Certification


IE(1) Intrinsically Safe for use in Class I, Division 1, Groups A, B,
C, and D; Class II, Division 1, Groups E, F, and G; Class III,
Division 1 when connected per Rosemount drawing
02051-1009; Non-incendive for Class I, Division 2, Groups
A, B, C, and D.
Temperature Code:T4 (Ta = 40 °C), T3 (Ta = 85 °C)
Enclosure Type 4X
For input parameters see control drawing 02051-1009.

Canadian Factory Mutual (FM-C) Certification

IF(1) Intrinsically safe approval. Intrinsically safe for Class I,


Division 1, Groups A, B, C, and D when connected in
accordance with Rosemount drawings 02051-1008.
Temperature Code T3C.
Dust-Ignition-Proof for Class II and Class III, Division 1,
Groups E, F, and G. Suitable for Class I, Division 2 Groups A,
B, C, and D hazardous locations. Enclosure type 4X, factory
sealed
For input parameters see control drawing 02051-1008.
(1) Ordering Information code for Product Certificates

www.rosemount-tg.com 25
Rosemount 5900S January 2014

Dimensional Drawings
Figure 1. Dimensions for Rosemount 5900S with parabolic antenna dimensions

226 (8.9) 177 (7.0)

244 (9.6)
297 (11.7)
170 (6.7)

440 (17.3)

Max
600
(23.6)

Note
Dimensions are in millimeters (inches).

26 www.rosemount-tg.com
January 2014 Rosemount 5900S

Figure 2. Rosemount 5900S with horn antenna dimensions


226 (8.9) 177 (7.0)

M32

224 (8.8)
332 (13.1)
350 (13.8)

Ø 175 (6.9)

Maximum
nozzle
height 4° inclined flange

Flange Minimum Nozzle Maximum Nozzle Height


Diameter
Minimum nozzle diameter
Horizontal flange 180 mm (7.1 in.) 330 mm (13.0 in.)
4° flange 185 mm (7.3 in.) 330 mm (13.0 in.)

Note
Dimensions are in millimeters (inches).

www.rosemount-tg.com 27
Rosemount 5900S January 2014

Figure 3. Rosemount 5900S with still-pipe array antenna dimensions

226 (8.9) 177 (7.0)

290 (11.4)

224 (9.6)
B

Antenna Diameter (D) B A


5 in. / DN125 (Ø 120 mm) 56 (2.2) 470 (18.5)
6 in. / DN150 (Ø 145 mm) 59 (2.3) 470 (18.5)
8 in. / DN150 (Ø 189 mm) 65 (2.6) 480 (18.9)
10 in. / DN150 (Ø 243 mm) 73 (2.9) 490 (19.3)
12 in. / DN150 (Ø 293 mm) 79 (3.1) 490 (19.3)

Note
Dimensions are in millimeters (inches).

28 www.rosemount-tg.com
January 2014 Rosemount 5900S

Figure 4. Rosemount 5900S with LPG/LNG antenna dimensions

250 (9.8) 226 (8.9)(1) 177 (7.0)


308 (12.1)

244 (9.6)
depending on flange type
max. 490 (19.3),
B

(1) 302 (11.9) with pressure transmitter option

Antenna Diameter (D) B


4 in. Sch10 (Ø 107 mm) 752 (29.6)
4 in. Sch40 (Ø 101 mm) 534 (21.0)
DN100 (Ø 99 mm) 502 (19.8)

Note
Dimensions are in millimeters (inches).

www.rosemount-tg.com 29
Rosemount 5900S Product Data Sheet
00813-0100-5900 Rev AA January 2014

Emerson Process Management Emerson Process Management


Rosemount Tank Gauging Rosemount Tank Gauging North America Inc.
Box 130 45 6005 Rogerdale Road
SE-402 51 Göteborg Mail Stop NC 136
SWEDEN 77072 TX Houston
Tel: +46 31 337 00 00 United States
Fax: +46 31 25 30 22 Primary Phone: +1 281 988 4000
E-mail: sales.rtg@emerson.com Secondary Phone: +1 800 722 2865
www.rosemount-tg.com E-mail: sales.rtg.hou@emerson.com

Emerson Process Management Emerson Process Management


Asia Pacific Pte Ltd Rosemount Tank Gauging Middle East & Africa.
1 Pandan Crescent P.O Box 20048
Singapore 128461 Manama
Tel +65 6777 8211 Bahrain
Fax +65 6777 0947 Tel +973 1722 6610
E-mail: specialist-itg.rmt-ap@ap.emersonprocess.com Fax +973 1722 7771
E-mail: rtgmea.sales@emerson.com

The Emerson logo is a trade mark and service mark of Emerson Electric Co.
Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc.
PlantWeb is a registered trademark of one of the Emerson Process Management group of companies.
HART and WirelessHART are registered trademarks of the HART Communication Foundation
Modbus is a trademark of Modicon, Inc.
All other marks are the property of their respective owners.
© 2014 Rosemount Tank Radar AB All rights reserved.
Product Data Sheet
July 2013
804030EN, Rev AA

Rosemount 2240S Multi-input Temperature


Transmitter

 Ultra-stable temperature transmitter  Interface to water level sensor

 Outstanding temperature conversion accuracy  Communicates via a 2-wire, low voltage


of ±0.05 °C (±0.09 °F) Tankbus for easy and safe installation

 Can connect up to 16 three or four wire


temperature elements
Rosemount 2240S July 2013

Rosemount 2240S Multi-input Temperature Transmitter


The ultra-stable high performance 2240S Multi-input
Temperature Transmitter is approved for demanding custody
transfer applications, which require very accurate level and
temperature measurements for net standard volume
calculations.

2240S can connect up to 16 three or four wire temperature spot


elements and an integrated water level sensor. The value from
each individual spot temperature element, in combination with
the level value from the radar gauge is used for average liquid
temperature calculation.

Available temperature sensor versions are:

 Rosemount 565 Multiple Spot Temperature Sensor


Rosemount 2240S can be installed on top of a Rosemount multiple
spot temperature / water level sensor, or it can be remotely installed
on a pipe or wall.  Rosemount 566 Multiple Spot Temperature Sensor for
cryogenic applications

 Rosemount 765 Multiple Spot Temperature Sensor with


2240S 5900S Integrated Water Level Sensor

2240S has an impressive temperature conversion accuracy of


±0.05 °C (±0.09 °F).

The 2240S supplies measured data to the Tankbus, which


3051S utilizes the Foundation™ fieldbus communication protocol.

The IP 66/67 and Nema 4X certified robust design makes it


suitable for installation in harsh environments.The water level
sensor is factory calibrated. If any adjustment is necessary
Rosemount 2240S Multi-input Temperature Transmitter installed
together with a sensor. during installation, it can easily be done with the 2240S built-in
on-line calibration feature.

Contents
Rosemount 2240S Multi-input Temperature Transmitter Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.............................................. Product certifications . . . . . . . . . . . . . . . . . . . . . . . . . .7
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Dimensional drawings . . . . . . . . . . . . . . . . . . . . . . . . . .9

2 www.rosemount-tg.com
July 2013 Rosemount 2240S

Ordering information

Additional information
Specifications: page 5
Certifications: page 7
Dimensional drawings: page 9

Table 1. Rosemount 2240S Multi-input Temperature Transmitter ordering information


Model Product Description - Pos 1
2240S Multi-input Temperature Transmitter
Performance Class - Pos 2
P Premium: ±0.05 °C (0.09 °F) instrument accuracy
Number of Temperature Sensor Inputs - Pos 3
16(1) Up to 16xRTD spot elements
08(1) Up to 8xRTD spot elements
04(1) Up to 4xRTD spot elements
00(2) None
Leads per Temperature Element - Pos 4
4 4-wire or 3-wire (individual or common return)
3 3-wire (individual or common return)
0(2) None (for water level only, no temperature sensors)
Auxiliary Inputs - Pos 5
A(2) Rosemount 765 temperature and water level sensor input
0 None
Tankbus: Power and Communication- Pos 6
F Bus powered 2-wire FOUNDATION™ fieldbus (IEC 61158)
Hazardous Location Certification - Pos 7
I1 ATEX Intrinsic Safety
I2 Brazil Inmetro Intrinsic Safety
I5 FM-US Intrinsic Safety
I6 FM-Canada Intrinsic Safety
I7 IECEx Intrinsic Safety
KA ATEX Intrinsic Safety + FM-US Intrinsic Safety
KC ATEX Intrinsic Safety + IECEx Intrinsic Safety
KD FM-US Intrinsic Safety + FM-Canada Intrinsic Safety
NA No Hazardous Location Certification
Custody Transfer Type Approval - Pos 8
0 None
C PTB (German W&M approval)
Housing - Pos 9
A Standard enclosure (polyurethane-covered aluminum IP 66/67)

www.rosemount-tg.com 3
Rosemount 2240S July 2013

Table 1. Rosemount 2240S Multi-input Temperature Transmitter ordering information


Cable/Conduit Connections - Pos 10
1
1(3) /2-14 NPT
2(4) M20 x 1.5 Adapters
G(5) Metal cable glands (1/2-14 NPT)
E (6) Eurofast male connector and 1/2-14 NPT
M(6) Minifast male connector and 1/2-14 NPT
Mechanical Installation - Pos 11
M(7) Integrated installation with Rosemount 565, 566, or 765 (standard)
W(8) Mounting kit for wall installations
P(8) Mounting kit for wall and pipes (1-2 in. vertical and horizontal pipes)
0 None
Options - none or multiple selections are possible
ST Engraved SST tag plate
Q4 Calibration Certificate
Typical Model Number: 2240S P 16 4 A F I1 0 A 1 M ST

(1) Temperature sensors of Pt-100 or Cu-90 type, for use in -200 to 250 °C (-328 to 482 °F), can be connected to the Rosemount 2240S.

(2) Water level sensor only requires Pos 3 code 00, Pos 4 code 0, and Pos 5 code A.

(3) Female thread. Includes 2 plugs.

(4) Female thread. Includes 2 plugs, and 3 adapters.

(5) Min. temperature -20 °C (-4 °F). ATEX / IECEx. Exe approved. Includes 2 plugs, and 3 glands (Includes an M32 gland if combined with Pos 11 code W or P).

(6) Includes 2 plugs.

(7) M33x1.5 female threaded connection. As standard, the transmitter is not pre-assembled with any temperature sensor.

(8) For separate installation of temperature sensor and transmitter.

4 www.rosemount-tg.com
July 2013 Rosemount 2240S

Specifications

Table 2. Rosemount 2240S Multi-input Temperature Transmitter specifications


General
Product Rosemount 2240S Multi-input Temperature Transmitter
Number of spot elements and wiring Up to 16 RTD spot elements or averaging sensors can be connected to a 2240S.

Rosemount temperature / water level sensors (models 565, 566, and 765)
Three wiring types can be used:
• 3-wire RTD with common return (1-16 spot elements)
• 3-wire RTD individual (1-16 spot elements with Rosemount 565, 1-6 spot elements with Rosemount
566, and 1-14 spot elements with Rosemount 765
• 4-wire RTD individual (1-16 spot elements with Rosemount 565, 1-4 spot elements with Rosemount
566, and 1-10 spot elements with Rosemount 765
Standard temperature sensor types Supports Pt-100 (according to IEC/EN60751, ASTM E1137) and Cu-90
Metrology sealing possibility Yes
Write protect switch Yes
Hazardous location certifications ATEX, FM-C, FM-US, and IECEx. For details, see“Product certifications” on page 7
Measuring performance
Temperature conversion accuracy ±0.05 °C (±0.09 °F)
Over measuring range and ambient temperature 20 °C (68 °F)
Ambient temperature effect ±0.05 °C (±0.09 °F)
Temperature measuring range Supports -200 to 250 °C (-328 to 482 °F) for Pt-100
Resolution ± 0.1 °C (± 0.1 °F) according to API chapter 7 and 12
Update time 4s
Configuration
Configuration tool TankMaster WinSetup is the recommended tool for easy configuration of 2240S. The Tankbus
autoconfiguration feature, handled by the Rosemount 2410 Tank Hub, supports 2240S
Configuration parameters (examples) Temperature:
• Number of temperature sensor elements
• Temperature element type (spot or average)
• Temperature element position in tank

Water Level Sensor:


• Level offset (difference between tank zero level and water zero level)
• Probe length (autoconfigured by Rosemount 765)
Output variables and units Spot and average temperature: °C (Celsius), and °F (Fahrenheit)
Free water level (FWL): meter, centimeter, millimeter, feet, or inch
Foundation™ fieldbus
Polarity sensitive No
Quiescent current draw 30 mA
Lift-off minimum voltage 9.0 VDC
Device capacitance / inductance See “Product certifications” on page 7
Class (Basic or Link Master) Link Master (LAS)
Number of available VCRs Maximum 20, including one fixed
Links Maximum 40
Minimum slot time / maximum
response delay / minimum 8 / 5/ 8
intermessage delay

www.rosemount-tg.com 5
Rosemount 2240S July 2013

Table 2. Rosemount 2240S Multi-input Temperature Transmitter specifications


Blocks and Execution time 1 Resource block, 3 Transducer blocks (Temperature, Register, AVG_Temp)
2 Multiple Analog Input (MAI) blocks: 15 ms, 6 Analog Input (AI) blocks: 10 ms,
1 Analog Output (AO) block: 10 ms, 1 Signal Characterizer (SGCR) blocks: 10 ms,
1 Proportional/Integral/Derivate (PID) block: 15 ms, 1 Integrator (INT) block: 10 ms
1 Arithmetic (ARTH) block: 10 ms, 2 Input Selector (ISEL) block: 10 ms
1 Control Selector (CS) block: 10 ms, 1 Output Splitter (OS) block: 10 ms
For more information, see the Foundation™ fieldbus Blocks manual (document number
00809-0100-4783)
Instantiation Yes
Conforming Foundation™ fieldbus ITK 5.2
PlantWeb alert support Yes
Action support wizards Restart/stop measurement, write protect device, factory reset - measurement configuration, reset
statistics, start/stop device simulation
Advanced diagnostics Failures/Maintenance/Advisory alerts:
Software, memory/database, electronics, internal communication, simulation, auxiliary device, auxiliary
device measurement, ambient temperature, average temperature measurement, temperature
measurement, configuration
Electric
Power supply • FISCO: 9.0-17.5 VDC polarity insensitive
• Entity: 9.0-30.0 VDC polarity insensitive
Internal power consumption 0.5 W
Bus current draw 30 mA
Tankbus cabling 0.5-1.5 mm² (AWG 22-16), twisted shielded pairs
Built-in Tankbus terminator Yes (to be connected if required)
Tankbus to sensor isolation Minimum 700 VAC
Auxiliary sensor input Digital bus connection for water level sensor
Mechanical
Housing material Polyurethane-coated die-cast aluminum
Cable entry (connection/glands) Three 1/2 - 14 NPT entries for cable glands or conduits. Two metal plugs to seal any unused ports are
enclosed in the delivery
Optional:
• M20 x 1.5 conduit / cable adapter
• Cable glands in metal (1/2 - 14 NPT)
• 4-pin male Eurofast connector or A size Mini 4-pin male Minifast connector
565/566/765 connection M33 x 1.5 female threaded connection
Optional:
An M32 adapter or M32 gland can be used if the 2240S is installed away from the sensor
Installation The 2240S can be installed directly on top of the temperature / water level sensor or remotely installed
on a 33.4-60.3 mm (1 to 2-in) pipe or on a wall
Dimensions See “Dimensional drawings” on page 9
Weight 2.8 kg (6.2 lbs)
Environment
Ambient temperature -40 to 70 °C (-40 to 158 °F). Minimum start-up temperature -50 °C (-58 °F)
Storage temperature -50 to 85 °C (-58 to 185 °F)
Humidity 0-100% relative humidity
Ingress protection IP 66 and 67 (Nema 4X)
Transient / built-in lightning protection According to IEC 61000-4-5, level 1 kV line to ground. Complies with IEEE 587 Category B transient
protection and IEEE 472 surge protection

6 www.rosemount-tg.com
July 2013 Rosemount 2240S

Product certifications
CE mark US Factory Mutual (FM-US) certification
Complies with applicable EU directives (EMC, ATEX)
Certificate of Compliance: 3035518
Ordinary location certification
Control Drawing: 9240 040-910
Complies with FM 3810:2005 and CSA: C22.2 No. 1010.1

European ATEX Directive information


I5(1) Intrinsically Safe
EC-Type Examination Certificate Number: FM09ATEX0047X
Control Drawing: 9240 040-976 FISCO Field Device (Fieldbus Terminals):
Intrinsically safe for Class I, II, III Division 1, Groups A, B, C, D, E, F
and G
Special conditions for safe use (x-marking), ATEX & IECEX
Temperature Class T4, Ambient Temperature Limits: -50 to +70 °C
Special conditions of use, FM-US & FM-C
Class I Zone 0 AEx ia IIC T4 (-50 °C  Ta  +70 °C)
The enclosure contains aluminum and is considered to present a Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W, Ci=2.2 nF, Li=2.0 µH
potential risk of ignition by impact or friction. Care must be taken
When supplied from a certified AEx [ib] FISCO Power Supply with
during installation and use to prevent impact or friction.
triplicated voltage limitation meeting the requirements for two
Rating II 2(1) G Ex ib [ia IIC] IIC T4 Ta=-50 °C to 70 °C FISCO faults (“ia” voltage limitation), e.g. a Rosemount 2410 Tank Hub:
9240040-976;IP 66/IP 67 is only applicable when supplied from a Class 1 Zone 1 AEx ib [ia IIC] IIC
certified Ex [ib] FISCO Power Supply with triplicated output Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W, Ci=2.2 nF, Li=2.0 µH
voltage limitation meeting the requirements for two faults (“ia”
Entity (Fieldbus Terminals):
voltage limitation) e.g. a Rosemount 2410 Tank Hub.
Intrinsically safe for Class I, II, III, Division 1, Groups A, B, C, D, E, F
The Rosemount 2240S Multi-input Temperature Transmitter will and G
not pass the 500 Vrms dielectric strength test and this must be Temperature Class T4, Ambient Temperature Limits: -50 to +70 °C
taken into account during installation. Class I Zone 0 AEx ia IIC T4 (-50 °C  Ta  +70 °C)
Ui=30 VDC, Ii=300 mA, Pi=1.3 W, Ci=2.2 nF, Li=2.0 µH.

I1(1) Intrinsically Safe RTD Terminals:


Uo=5.9 VDC, Io=398 mA, Po=585 mW
FISCO Field Device (Fieldbus Terminals): Group A, B, IIC: Co  43 µF, Lo  0.2 mH
II 1G 0575 Group C, E, IIB: Co= unlimited, Lo  0.7 mH
Ex ia IIC T4 (-50 °C Ta 70 °C) Group D, F, G, IIA: Co= unlimited, Lo  1.8 mH
Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W, Ci=2.2 nF, Li =2.0 µH When no connections are made to the Sensorbus Terminal:
When supplied from a certified Ex [ib] FISCO Power Supply with Uo=5.9 VDC, Io=100 mA, Po=150 mW, Co= 43 µF, Lo=3 mH
triplicated voltage limitation meeting the requirements for two Sensorbus Terminal:
faults (“ia” voltage limitation), e.g. a Rosemount 2410 Tank Hub: Uo=6.6 VDC, Io=223 mA, Po=363 mW
II 2(1)G 0575 Group A, B, IIC: Co  22 µF, Lo  0.7 mH
Ex ib [ia IIC] IIC T4 (-50 °C Ta 70 °C) Group C, E, IIB: Co  500 µF, Lo  3.3 mH
Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W, Ci=2.2 nF, Li =2.0 µH Group D, F, G, IIA: Co =unlimited, Lo  6 mH

Entity (Fieldbus Terminals):

II 1G 0575

Ex ia IIC T4 (-50 °C  Ta  +70 °C)


Ui=30 VDC, Ii=300 mA, Pi=1.3 W, Ci=2.2 nF, Li =2.0 µH

RTD Terminals:
Uo=5.9 VDC, Io=398 mA, Po=585 mW
Group IIC: Co 43 µF, Lo  0.2 mH
Group IIB: Co= unlimited, Lo  0.7 mH
Group IIA: Co= unlimited, Lo  1.8 mH

Sensorbus Terminal:
Uo=6.6 VDC, Io=223 mA, Po=363 mW
Group IIC: Co  22 µF, Lo  0.7 mH
Group IIB: Co  500 µF, Lo  3.3 mH
Group IIA: Co= unlimited, Lo  6 mH

(1) Ordering information model code for hazardous location certification,


see page 3

www.rosemount-tg.com 7
Rosemount 2240S July 2013

Canadian Factory Mutual (FM-C) certification RTD Terminals:


Certificate of Compliance: 3035518C Uo=5.9 VDC, Io=398 mA, Po=585 mW
Control Drawing: 9240 040-910 Group IIC: Co  43 µF, Lo  0.2 mH
Group IIB: Co= unlimited, Lo  0.7 mH
Group IIA: Co= unlimited, Lo  1.8 mH
When no connections are made to the Sensorbus Terminal:
I6(1) Intrinsically Safe
Uo=5.9 VDC, Io=100 mA, Po=150 mW, Co= 43 µF, Lo=3 mH
FISCO Field Device (Fieldbus Terminals):
Intrinsically safe for Class I, II, III Division 1, Groups A, B, C, D, E, F
and G Sensorbus Terminal:
Temperature Class T4, Ambient Temperature Limits: -50 to +70 °C Uo=6.6 VDC, Io=223 mA, Po=363 mW
Class I Zone 0 Ex ia IIC T4 (-50 °C  Ta  +70 °C) Group IIC: Co  22 µF, Lo  0.7 mH
Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W, Ci=2.2 nF, Li=2.0 µH Group IIB: Co  500 µF, Lo  3.3 mH
Group IIA: Co =unlimited, Lo  6 mH
When supplied from a certified Ex [ib] FISCO Power Supply with
triplicated voltage limitation meeting the requirements for two
faults (“ia” voltage limitation), e.g. a Rosemount 2410 Tank Hub:
Class 1 Zone 1 Ex ib [ia IIC] IIC FISCO system Combination Approvals
Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W, Ci=2.2 nF, Li =2.0 µH KA=I1+I5 (ATEX + FM-US)
Entity (Fieldbus Terminals): KC=I1+I7 (ATEX + IECEx)
Intrinsically safe for Class I, II, III, Division 1, Groups A, B, C, D, E, F KD=I5+I6 (FM-US+FM-C)
and G
Temperature Class T4, Ambient Temperature Limits: -50 to +70 °C For more information on product certificates, refer to the Rosemount
Class I Zone 0 Ex ia IIC T4 (-50 °C  Ta  +70 °C) 2240S Reference manual (document number 300550EN).
Ui=30 VDC, Ii=300 mA, Pi=1.3 W, Ci=2.2 nF, Li =1.5 µH.

RTD Terminals:
Uo=5.9 VDC, Io=398 mA, Po=585 mW
Group A, B, IIC: Co  43 µF, Lo  0.2 mH
Group C, E, IIB: Co= unlimited, Lo  0.7 mH
Group D, F, G, IIA: Co= unlimited, Lo  1.8 mH
When no connections are made to the Sensorbus Terminal:
Uo=5.9 VDC, Io=100 mA, Po=150 mW, Co= 43 µF, Lo=3 mH

Sensorbus Terminal:
Uo=6.6 VDC, Io=223 mA, Po=363 mW
Group A, B, IIC: Co  22 µF, Lo  0.7 mH
Group C, E, IIB: Co  500 µF, Lo  3.3 mH
Group D, F, G, IIA: Co =unlimited, Lo  6 mH

IECEx certification
Certification of Conformity Number: IECEx FMG 10.0010X
Control Drawing: 9240 040-976
I7(1) Intrinsically Safe

FISCO Field Device (Fieldbus Terminals):


Ex ia IIC Ga T4 (-50 °C  Ta  +70 °C)
Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W, Ci=2.2 nF, Li =2.0 µH

When supplied from a certified Ex [ib] FISCO Power Supply with


triplicated voltage limitation meeting the requirements for two
faults (“ia” voltage limitation), e.g. a Rosemount 2410 Tank Hub:
Ex ib IIC [ia IIC Ga] Gb T4 (-50 °C  Ta  +70 °C)
Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W, Ci=2.2 nF, Li =2.0 µH

Entity (Fieldbus Terminals):


Ex ia IIC Ga T4 (-50 °C  Ta  +70 °C)
Ui=30 VDC, Ii=300 mA, Pi=1.3 W, Ci=2.2 nF, Li =2.0 µH

8 www.rosemount-tg.com
July 2013 Rosemount 2240S

Dimensional drawings Dimensions are in mm (inches)

Figure 1. Rosemount 2240S Multi-input Temperature Transmitter dimensions

Holder for 244 (9.6)


optional
tag plate 143 (5.6)

177 (7.0)

Optional
mounting kit
M33

Can be installed together with a multiple spot temperature sensor


or separately on a 33.4-60.3 mm (1 to 2-in.) pipe, or on a wall

www.rosemount-tg.com 9
Rosemount 2240S Product Data Sheet
804030EN, Rev AA July 2013

Emerson Process Management Emerson Process Management


Rosemount Tank Gauging Rosemount Tank Gauging North America Inc.

Box 130 45 6005 Rogerdale Road


SE-402 51 Göteborg Mail Stop NC 136
SWEDEN 77072 TX Houston
Tel: +46 31 337 00 00 United States
Fax: +46 31 25 30 22 Primary Phone: +1 281 988 4000
E-mail: sales.rtg@emerson.com Secondary Phone: +1 800 722 2865
www.rosemount-tg.com E-mail: sales.rtg.hou@emerson.com

Emerson Process Management Emerson Process Management


Asia Pacific Pte Ltd Rosemount Tank Gauging Middle East & Africa.

1 Pandan Crescent P. O Box 20048


SINGAPORE 128461 Manama
Tel: +65 6777 8211 Bahrain
Fax: +65 6777 0947 Tel: +973 1722 6610
Email: specialist-itg.rmt-ap@ap.emersonprocess.com Fax: +973 1722 7771
E-mail: rtgmea.sales@emerson.com

Standard Terms and Conditions of Sale can be found at www.rosemount.com\terms_of_sale


The Emerson logo is a trade mark and service mark of Emerson Electric Co.
Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc.
PlantWeb is a registered trademark of one of the Emerson Process Management group of companies.
HART and WirelessHART are registered trademarks of the HART Communication Foundation
All other marks are the property of their respective owners.
© 2013 Rosemount Inc. All rights reserved.
Product Data Sheet
November 2013
00813-0100-2230, Rev AA

Rosemount 2230 Graphical Field Display


Remote Data Access

 Displays tank gauging data such as level,  Approved for Legal Custody Transfer read-out
temperature, pressure and total observed
volume  Communicates via a 2-wire, low voltage
Tankbus for easy and safe installation
 Supports 7 languages
 Provides several view options
 Intrinsically safe
 Robust design for tough environments
 Back-lit display with excellent readability
Rosemount 2230 November 2013

Rosemount 2230 Graphical Field Display


Tank data where you need it
Rosemount 2230 Graphical Field Display presents inventory tank
gauging data such as level, temperature, and pressure. This
Weather
protection back-lit userfriendly display is designed for tough environments,
lid and can be installed in hazardous (Ex) locations, on the tank roof
or near the tank. It is approved for legal custody transfer.

 Rosemount 2230 can display data from devices connected to


Menu a 2410 tank hub for maximum 10 tanks.

Softkeys  The four softkeys allow you to navigate through the different
menus to provide all tank data, directly in the field.

 The 2230 display is powered by the FISCO Tankbus.

Flexible installation
The intrinsically safe 2230 display can be installed in hazardous
(Ex) areas, either on the tank roof or at the foot of the tank for a
flexible and convenient read-out of tank data.
Tankbus
 Wiring can be daisy-chained via the 2230 terminals to other
5900S
2240S with Radar devices on the Tankbus. Rosemount 2230 has a built-in
temperature Level Tankbus terminator which can be connected if required.
sensor Gauge

 The 2230 display is designed to be mounted on a plate


TankMaster
2410 Tank PC towards a wall, or on a pipe by using the optional mounting
Hub kit.
2230 Graphical Rosemount TankRadar
Ext. pwr
RS-232

Field Display
USB

On - TERM - Off
Rx
Tx

Lo - GAIN - Hi

FBM 2180

 A protecting lid prevents degradation of the LCD display due


to sunlight exposure.

Contents
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Dimensional drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2 www.rosemount-tg.com
November 2013 Rosemount 2230

Ordering information
Table 1. 2230 Graphical Field Display ordering information
Model Product Description

2230 Graphical Field Display

Default Language

E English

S Spanish

G German

F French

P Portuguese

I Italian

C Chinese

Tankbus: Power and Communication

F Bus powered 2-wire FOUNDATATION™ fieldbus (IEC 61158)

Software

S Standard

Hazardous Location Certification

I1 ATEX Intrinsic Safety

I2 Brazil Inmetro Intrinsic Safety

I5 FM-US Intrinsic Safety

I6 FM-Canada Intrinsic Safety

I7 IECEx Intrinsic Safety

KA ATEX Intrinsic Safety+FM-US Intrinsic Safety

KC ATEX Intrinsic Safety+IECEx Intrinsic Safety

KD FM-US Intrinsic Safety+FM-Canada Intrinsic Safety

NA None

Custody Transfer Type Approval

R OIML R85 E performance certification

C(1) PTB Eich (German W&M)

N(1) NMi (the Netherlands W&M)

0 None

Housing

A Standard enclosure (IP 66/67). Polyurethane-covered aluminium

www.rosemount-tg.com 3
Rosemount 2230 November 2013

Table 1. 2230 Graphical Field Display ordering information


Cable / Conduit Connections

1 1/2–14 NPT and 3/4-14 NPT adapters, female thread. 3 adapters and 2 plugs included

2 M20 x 1.5 and M25 x 1.5, female thread. Includes 2 plugs


Metal Cable Glands (M20 x 1.5 and M25 x 1.5). Minimum temperature -20 °C (-4 °F). ATEX / IECEx Exe approved.
G
2 plugs included
E Eurofast Male, M20 x 1.5 and M25 x 1.5. 3 plugs included

M Minifast Male, M20 x 1.5 and M25 x 1.5. 3 plugs included

Mechanical Installation

W Wall installation kit included

P Mounting kit for both wall and pipe installation (1-2 in. vertical and horizontal pipes)

Options – none or multiple selections are possible

ST Engraved SST tag plate (provide tag information in order)

Typical Model Number: 2230 E F S I5 R A 1 P ST

(1) Requires 5900S Radar Level Gauge and 2410 Tank Hub with corresponding Custody Transfer Type Approval.

4 www.rosemount-tg.com
November 2013 Rosemount 2230

Specifications Response time


< 0.5 s from released button to new image.

Toggle time Cable entry (connection/glands)


The time each value or set of values are displayed: 2-30 s. Three entries, two M20×1.5 and one M25×1.5. Two metal plugs
to seal any unused ports are included in the delivery.
Language selection possibilities Optional:
English, French, German, Spanish, Italian, Chinese and • ½ - 14 NPT conduit / cable adapter
Portuguese. • Cable glands in metal (½ - 14 NPT)
• 4-pin male Eurofast connector or A size Mini 4-pin male Minifast
Variables to display connector
Level, level rate, ullage, signal strength, volume (TOV), liquid
average temperature, 1-16 spot temperature, vapor average
Tankbus cabling
temperature, ambient temperature, free water level, vapor AWG 0.5-1.5 mm2 (22-16), shielded twisted pairs.
pressure, liquid pressure, air pressure, observed density, and Built-in Tankbus terminator
flow rate. Yes (to be connected if required).
Units to display
•Level, free water level, and ullage: meter, millimeter, feet, or
Mechanical
imperial 1/16 Housing material
•Level rate: meter/second, meter/hour, feet/second, or
Polyurethane-covered die-cast aluminum.
feet/hour
•Flow rate: meter3/hour, liter/minute, feet3/hour,
barrel/hour, or US gallon/hour Dimensions (width x height x depth)
•Total Observed Volume (TOV): meter3, liters, feet3, barrel, or 150 x 120 x 78 mm2 (5.9 x 4.7 x 3.1 in.)
US gallon
•Temperature: °F, °C, or °K.
Weight
•Pressure: psi, psiA, psiG, bar, barA, barG, atm, Pa, or kPa
1.2 kg (2.6 lbs)
•Density: kg/m3, kg/liter, or °API
•Signal strength: mV Environment
View Options
Ambient temperature
•Select View: “Single Value”, “Two Values” or “Four Values”.
-20 to 70 °C (-4 to 158 °F)
The single value view presents 25 mm (1 in.) digits
•Options: Units, tanks (all/default/custom), variables to Storage temperature
display, toggle time, and display language -30 to 85 °C (-22 to 185 °F)
•Service: To adjust LCD contrast, show custody transfer view,
make a factory reset, or activate an LCD test feature Humidity
0-100% relative humidity, non-condensing.
Electric
Ingress protection
Power supply IP 66 and 67 (Nema 4)
Powered by 2410 Tank Hub (9.0-17.5 VDC, polarity insensitive).
Metrology sealing possibility
Tankbus current draw Yes
30 mA
Write protect switch
Display type Yes
Back-lit LCD monochrome display, 128x64 pixels.
Transient / built-in lightning protection
Start-up time According to IEC 61000-4-5, level 1 kV line to ground. Complies
5s with IEEE 587. Category B transient protection and IEEE 472
surge protection.
Update rate
New values to display once every two seconds.

www.rosemount-tg.com 5
Rosemount 2230 November 2013

Installation and Configuration


The 2230 display can be installed either on the tank roof or at
the foot of the tank for a flexible and convenient read-out of
tank data.

Cabling can be daisy-chained via the 2230 terminals to other


devices on the Tankbus. A terminator is required at each end of
the Tankbus to ensure the fieldbus network will have proper
signal levels.
Generally, one is at the fieldbus power supply and the other
terminator is in the last device in the network.
Rosemount 2230 has a built-in terminator which can be
connected if required.

The display is designed to be mounted on a plate, towards a


wall or similar. It is attached to the plate with four M4 screws.
It is important to provide space for opening the lid.
The protecting lid prevents degradation of the LCD display due
to sunlight exposure.
For more information, see the Rosemount 2230 Reference
Manual (document number 300560EN).

Configuration is done locally via the device's graphical menu


and built-in buttons or remotely by using the TankMaster
WinSetup software.
For more information, see the Rosemount 2230 Reference
Manual (document number 300560EN) or the Rosemount
TankMaster WinSetup Reference Manual (document number
300510EN).

6 www.rosemount-tg.com
November 2013 Rosemount 2230

Product certifications
Ordinary location certification Entity (Fieldbus Terminals):
Complies with FM 3810:2005 and CSA: C22.2 No. 1010.1 Intrinsically safe for Class I, II, III Division 1, Groups A, B, C,
D, E, F, and G
CE-mark Temperature Class T4, Ambient Temperature Limits: -50 °C
Complies with applicable EU directives (EMC, ATEX) to +70 °C
Class 1 Zone 0 AEx ia IIC T4 (-50 °C Ta  +70 °C)
Electro Magnetic Compatibility Ui=30 VDC, Ii=300 mA, Pi=1.3 W, Ci=2.1 nF, Li=1.1 µH
Emerson Process Management complies with the EMC Directive.
Canadian Factory Mutual (FM-C) Certification
SPECIAL CONDITIONS FOR SAFE USE (X-MARKING), ATEX AND IECEX Certificate of Compliance: 3037177C
SPECIAL CONDITIONS OF USE, FM-US AND FM-C Control Drawing: 9240 040-949
The non-metallic parts incorporated in the enclosure of this equipment
may generate an ignition-capable level of electrostatic charge. Therefore
particularly when it is used for applications that specifically require I6(1) Intrinsically Safe
Division 1 and Group II, Zone 0 located equipment, the equipment shall FISCO Field Device (Fieldbus Terminals):
not be installed in a location where the external conditions are
Intrinsically safe for Class I, II, III Division 1, Groups A, B, C,
conducive to the build-up of electrostatic charge on such surfaces.
D, E, F, and G
Additionally, the equipment shall only be cleaned with a damp cloth.
The enclosure contains aluminum and is considered to present a Temperature Class T4, Ambient Temperature Limits: -50 °C
potential risk of ignition by impact or friction. Care must be taken during to +70 °C
installation and use to prevent impact or friction. Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W, Ci=2.1 nF, Li=1.1 µH
The Model 2230 Graphical Field Display will not pass the 500 Vrms
dielectric strength test and this must be taken into account during Entity (Fieldbus Terminals):
installation.
Intrinsically safe for Class I, II, III Division 1, Groups A, B, C,
D, E, F, and G
European ATEX Directive Information Temperature Class T4, Ambient Temperature Limits: -50 °C
to +70 °C
EC-Type Examination Certificate Number: FM10ATEX0046X Ui=30 VDC, Ii=300 mA, Pi=1.3 W, Ci=2.1 nF, Li=1.1 µH
Control Drawing: 9240 040-949
IECEx Certification
I1(1) Intrinsically Safe Certificate of Conformity Number: IECEx FMG 10.0021X
FISCO Field Device (Fieldbus Terminals): Control Drawing: 9240 040-949
II 1 G 0575

Ex ia IIC T4 (-50 °C  Ta  +70 °C) I7(1) Intrinsically Safe


Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W, Ci=2.1 nF, Li=1.1 µH
FISCO Field Device (Fieldbus Terminals):
Ex ia IIC Ga T4 (-50 °C  Ta  +70 °C)
Entity (Fieldbus Terminals):
Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W, Ci=2.1 nF, Li=1.1 µH
II 1 G 0575

Ex ia IIC T4 (-50 °C  Ta  +70 °C)


Ui=30 VDC, Ii=300 mA, Pi=1.3 W, Ci=2.1 nF, Li=1.1 µH Entity (Fieldbus Terminals):
Ex ia IIC Ga T4 (-50 °C  Ta  +70 °C)
Ui=30 VDC, Ii=300 mA, Pi=1.3 W, Ci=2.1 nF, Li=1.1 µH
US Factory Mutual (FM-US) Certification
Certificate of Compliance: 3037177 Combination Approvals
Control Drawing: 9240 040-949
KA=I1+I5 (ATEX + FM-US)

I5(1) Intrinsically Safe KC=I1+I7 (ATEX +IECEx)


FISCO Field Device (Fieldbus Terminals): KD=I5+I6 (FM-US+FM-C)
Intrinsically safe for Class I, II, III Division 1, Groups A, B, C, For details, see the Rosemount 2230 Reference Manual
D, E, F, and G (document number 300560EN).
Temperature Class T4, Ambient Temperature Limits:
-50 °C to +70 °C
Class 1 Zone 0 AEx ia IIC T4 (-50 °C  Ta  +70 °C)
Ui=17.5 VDC, Ii=380 mA, Pi=5.32 W, Ci=2.1 nF, Li=1.1 µH

(1) Ordering Information code for Hazardous location Certificates, see page 3.
www.rosemount-tg.com 7
Rosemount 2230 November 2013

Dimensional drawings Dimensions are in millimeters (inches)

150 (5.9)
78 (3.1)

Rad
ius
120 (4.7)

95 (
68 (2.7)

3.7
)

8 www.rosemount-tg.com
November 2013 Rosemount 2230

www.rosemount-tg.com 9
Rosemount 2230 Product Data Sheet
00813-0100-2230 Rev AA November 2013

Emerson Process Management Emerson Process Management


Rosemount Tank Gauging Rosemount Tank Gauging North America Inc.
Box 130 45 6005 Rogerdale Road
SE-402 51 Göteborg Mail Stop NC 136
SWEDEN 77072 TX Houston
Tel: +46 31 337 00 00 United States
Fax: +46 31 25 30 22 Primary Phone: +1 281 988 4000
E-mail: sales.rtg@emerson.com Secondary Phone: +1 800 722 2865
www.rosemount-tg.com E-mail: sales.rtg.hou@emerson.com

Emerson Process Management Emerson Process Management


Asia Pacific Pte Ltd Rosemount Tank Gauging Middle East & Africa.
1 Pandan Crescent P.O Box 20048
Singapore 128461 Manama
Tel: +65 6777 8211 Bahrain
Fax: +65 6777 0947 Tel: +973 1722 6610
E-mail:specialist-itg.rmt-ap@ap.emersonprocess.com Fax: +973 1722 7771
E-mail: rtgmea.sales@emerson.com

Standard Terms and Conditions of Sale can be found at www.rosemount.com\terms_of_sale


The Emerson logo is a trade mark and service mark of Emerson Electric Co.
Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc.
PlantWeb is a registered trademark of one of the Emerson Process Management group of companies.
HART and WirelessHART are registered trademarks of the HART Communication Foundation
All other marks are the property of their respective owners.
© 2013 Rosemount Inc. All rights reserved.
Product Data Sheet
00813-0100-4420, Rev BA
Catalog 2008 - 2009 1420 Wireless Gateway

1420 Wireless Gateway


• Highest level of wireless security in the
industry
• >99% data reliability
• No site survey required
• Seamless and flexible host integration
• Integrated web server for access to field
device and process data
• Easy network expansion up to 100 devices
• Trending with local historian

Contents
Smart Wireless Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page Wireless-2
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page Wireless-5
Product Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page Wireless-6
Dimensional Drawings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page Wireless-8
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page Wireless-10
Product Data Sheet
00813-0100-4420, Rev BA
1420 Wireless Gateway Catalog 2008 - 2009

Smart Wireless Solutions


A robust wireless solution is much more than the sum of its parts; it is the result of innovative integration with
consideration given to every aspect of the overall system. A Smart Wireless solution consists of the measurement
device, the self-organizing network and easy host integration. Emerson Process Management will offer a full
portfolio of wireless solutions enabled by self-organizing networks.
SELF-ORGANIZING NETWORKS LAYERED SECURITY KEEPS YOUR
Self-organizing networks combine the high reliability NETWORK SAFE
of wired networks with the flexibility and low cost of In today’s digital world, communication security is
wireless networks. becoming a concern for everyone. Emerson
Two key components of reliability are the availability understands the needs of users to be able to control
of multiple communication paths for each device and the level of security in wireless networks.
automatic path configuration.These innovations Communication security is the ability to pass
result in data reliability over 99%. Data reliability is an verifiable data from a trusted source to a trusted
indication of the amount of measurement data that is recipient without third party interference. Emerson
lost due to communication failures. The multi-path has a layered approach to security comprised of the
communications used enable the wireless networks following five mitigation strategies:
to be deployed without a site survey - saving the end Authentication - Authenticate sender and receiver
user time and money. Verification - Verify that the data is valid
Robust networks in challenging environments Encryption - Encrypt the data
Self-organizing networks are inherently well suited Key Management - Periodic changes to encryption
for use in challenging environments. The multi-path keys managed automatically by the 1420 Wireless
communication routes and self-forming Gateway
characteristics are able to eliminate the effects of Anti-jamming - Avoid interference and blocked
obstacles such as scaffolding and infrastructure by communication spaces
re-organizing the network around the obstacles. This multi-dimensional approach gives users the
flexibility to control the level of security required for
1420 Wireless Gateway is scalable
their networks. These five layers of protection, when
The 1420 Wireless Gateway is capable of supporting properly deployed, are very effective at thwarting
up to 100 wireless field devices. Once your initial attacks on the network.
network has been installed, it is quick and easy to The self-organizing network uses 128 bit encryption,
add additional devices allowing you to plan a large user definable key rotation and frequency hopping
installation and add devices over time. spread spectrum. It also does not support
Powers PlantWeb TCP/IP-based communication.
The 1420 Wireless Gateway powers The gateway and information system uses Secure
PlantWeb® by working together with HTTP and SSL-enabled connections for Ethernet
AMS™ Suite software to deliver the power communications with the host system. All other ports
of wireless connectivity with Emerson field remain closed.Wireless technology offers cost and
devices. performance benefits - as long as communication
security is maintained. Best practices have been
tested and validated with customers and wireless
experts, and are available to help you secure your
network.

SMART WIRELESS SOLUTIONS


Rosemount 648 Wireless Temperature Rosemount 3051S Wireless Series
Transmitter The scalable 3051S enables fully integrated
The 648 integrates temperature measurement into a pressure, flow and level self-organizing network
self-organizing network, providing best in class solutions to optimize plant performance and reduce
security, reliability, SmartPower, and network risk.
scalability, optimizing plant performance while
minimizing maintenance.
Wireless-2
Product Data Sheet
00813-0100-4420, Rev BA
Catalog 2008 - 2009 1420 Wireless Gateway

Wireless Overview
Devices
The devices that are integrated into Smart Wireless solutions are
the same high quality, reliable and proven instruments that are in
use today. These devices have been equipped with a wireless
output that simply takes the measurement and transmits the digital
HART data wirelessly.

Gateway
The 1420 Wireless Gateway enables the most robust security
available, easy host integration with no additional software and
continuously is optimizing network performance to maximize data
reliability and battery life of the wireless devices.

Seamless Integration
Smart Wireless devices from Emerson Process Management
provide measurement data and diagnostics data back to any type
of information system including Serial Modbus, Modbus TCP,
OPC, legacy systems and data historians.

INFORMATION MANAGEMENT Webserver

Trending with Local Historian Configuration of the 1420 Wireless Gateway is


accomplished using any PC with a standard web
The 1420 Wireless Gateway enables trending browser and secure Ethernet connection, eliminating
capabilities both in the web server and in the host the need for special software. User configurable
system. Multiple trends may be collected in the web monitoring pages allow measured values to be
server, with each trend able to collect and display grouped and easily viewed with the web interface.
data from a single measurement point, or a group of Web pages can be viewed either over a dedicated
points. Trends may also be exported in Excel, CSV network or connected to the user’s Intranet.
or XML formats. Username and Password security is provided to
prevent unauthorized access to the data.
OPC Interface
The 1420 Wireless Gateway supports Asset Management
communication with host applications using OPC. The 1420 Wireless Gateway extends all the
Any standard output or parameter can be made capabilities of AMS Suite to field devices.
available to the OPC client application. Comprehensive asset management capabilities such
Modbus Interface as device configuration, comparing configurations,
audit trail, calibration, alerts and more are now
The 1420 Wireless Gateway can communicate with available when using AMS Suite with the 1420.
the host system using the Modbus protocol. Any When used with AMS Asset Portal, AMS Suite can
standard measurement, status, or other parameter provide a means to make critical device data from the
can be read by any Modbus host system. Register 1420 available over an entire enterprise using a
number assignments are completely configurable, standard web browser over a secure Ethernet
allowing the 1420 registers to match the connection.
requirements of the Modbus host application. The
User configurable alerts have also been added to the
Modbus RS485 serial interface supports data rates
wireless output allowing users to add value to
from 9600 bps to 57600 bps. Modbus TCP/IP
monitoring points. These alerts can be set to flag
integration is available using the Ethernet interface.
maintenance notifications, environmental emissions,
use of safety showers, tank levels - the applications
are unlimited.

Wireless-3
Product Data Sheet
00813-0100-4420, Rev BA
1420 Wireless Gateway Catalog 2008 - 2009

MEASUREMENT DEVICES
The devices that are integrated into Smart Wireless
solutions are the same high quality, reliable and
proven instruments that are in use today. These
devices have been equipped with a wireless output
that simply takes the measurement and transmits the
digital HART data wirelessly, instead of the traditional
4-20 mA loop signal. The devices are installed
exactly the same as wired devices without the added
cost of wiring.
Instruments are HART based, providing the same
rich data they do today - only now, there is a means
to extract the additional HART information that
formerly has been stranded in the device because
analog control systems are unable to tap this wealth
of information via the 4-20 mA loop.
Rugged Housing
The 1420 Wireless Gateway is suitable for field
mounting in any Zone 2/Division 2, general purpose
area and is NEMA 4X/IP65 rated.

Wireless-4
Product Data Sheet
00813-0100-4420, Rev BA
Catalog 2008 - 2009 1420 Wireless Gateway

Specifications
Functional Specifications Self-Organizing Network Specifications
Power Input Options Network Protocol and Synchronization
24 V dc Wireless enabled HART® devices. Capable of regular PV
500 milliamps required to power the 1420 Wireless Gateway transmission, two way HART® configuration and diagnostics, and
module. AMS management.

Environmental Network Size/ Transmit Rate


Operating Temperature Range: 100 Wireless enabled HART® devices/ max transmit rate 60 s.
-40 to 140 °F (-40 to 60 °C) 50 Wireless enabled HART® devices/ max transmit rate 15 s.
Operating Humidity Range:
Network Latency
0-95% relative humidity
100 Wireless enabled HART® devices: 10 s.
Lightning and Surge Protection 50 Wireless enabled HART® devices: 5 s.
Meets the requirements of EN61000-4-5.
Data Reliability
Physical Specifications >99%

Antenna
Weight
Integrated Omnidirectional Antenna
10 lb (4.54 kg)
Optional remote mount omnidirectional antenna
Material of Construction
Radio Frequencies
Housing
902-928 MHz FHSS
Low-copper aluminum, NEMA 4X
2.4-2.5 GHz DSSS
Pollution Degree 2
Paint System Security Specifications
Polyurethane
Cover Gasket Ethernet
Silicone Rubber SSL-enabled TCP/IP
Antenna
1420 Wireless Gateway
PBT/PC integrated omnidirectional antenna
Role-based Access Controlled
Certifications Unused Ethernet Ports are Closed
Class I Division 2 (U.S.)
Self-Organizing Network
Equivalent Worldwide
Encrypted Wireless enabled HART® with rotating keys and user
controlled join keys
Communication Specifications
Applications
RS485 Monitoring solution for automated operator route, redundant
2-wire communication link for Modbus multidrop connections measurements, and other non-critical applications.
Baud rate: 57600, 38400, 19200, or 9600 Not for mission critical safety or control applications.
Protocol: Modbus RTU
Remote Antenna Specifications(1)
Wiring: Single twisted shielded pair, 18 AWG. Wiring distance is
approximately 5,000 ft. (1,524 m) 6 dB gain antenna, [length 11.5 in. (300 mm)] N type connector, for
use with up to 50 ft. (15,2 m) of LMR-400 coaxial cable.
Ethernet
Lightening Protection
10baseT/ 100base-TX Ethernet communication port,
50 Ohm Gastube type, bulkhead mount, weatherized, 0.5 dB
Supports Modbus TCP/IP and OPC with 32 bit floating point
insertion loss.
values. Scaled integers are supported with Modbus TCP/IP.
Modbus registers and OPC tags may be assigned to
measurement inputs from self-organizing network.
Assignment of tags include measurement values, status,
(1) For remote antenna applications, the WL1 through WL4
timestamp, alarm, and battery voltage of self-organizing
options are required to maintain all applicable certifica-
transmitters.
tions, approvals, and network performance specifica-
The configuration of the tags and monitoring is performed using tions. Increasing antenna gain or remote cable length
web pages generated by the 1420 Wireless Gateway. may result in loss of certification and/or network perfor-
AMS management of self-organizing network transmitters. mance.

Wireless-5
Product Data Sheet
00813-0100-4420, Rev BA
1420 Wireless Gateway Catalog 2008 - 2009

Product Certifications
Approved Manufacturing Locations Canadian Standards Association (CSA)
Rosemount Inc. – Chanhassen, Minnesota, USA N6 CSA Division 2 & Dust Ignitionproof
Certificate Number: 1849337
Suitable for Class I, Division 2, Groups A,B,C,D;
Telecommunication Compliance Dust Ignitionproof for Class II, Groups E,F, and G;
All wireless devices require certification to ensure that they adhere Suitable for Class III Hazardous Locations.
to regulations regarding the use of the RF spectrum. Nearly every Install per Rosemount drawing 01420-1011.
country requires this type of product certification. Emerson is Temperature Code: T4(-40°C < Ta < 60°C)
working with governmental agencies around the world to supply CSA Enclosure Type 4X
fully compliant products and remove the risk of violating country
directives or laws governing wireless device usage. To see which
countries our devices have received certification for use in, see
European Certification
www.rosemount.com/smartwireless. N1 ATEX Type n (ATEX)
See note below
Certificate Number: BASEEFA07ATEX0057X
European Union Directive Information ATEX Marking: Ex II 3 G
The EC declaration of conformity for all applicable European EEx nA nL IIC T4 (-40°C < Ta < 60°C)
directives for this product can be found on the Rosemount website
ND ATEX Dust Ignition-proof Approval
at www.rosemount.com. A hard copy may be obtained by
Certificate Number: BASEEFA07ATEX0056x
contacting your local sales representative.
Ex tD A22 IP66 T135 (-40 °C< Ta < +60)
ATEX Directive (94/9/EC) EEx nA nL IIC T4 (-40°C < Ta < 60°C) II 3D
Emerson Process Management complies with the ATEX Vmax = 28V
Directive.
IECEx Certification
Electro Magnetic Compatibility (EMC) (2004/108/EC)
N7 IECEx Type n
EN 61326-1: 1997 with amendments A1, A2, and A3 -
See note below
Industrial
Certificate Number:IECEx BAS 07.0012x
Radio and Telecommunications Terminal Equipment Ex nC IIC T4 (-40°C =< Ta <= +60°C)
Directive (R&TTE)(1999/S/EC) Rated Voltage: 28V
Emerson Process Management complies with the R&TTE NF IECEx Dust Ignition-proof Approval
Directive Certificate Number: IECEx BAS 07.0013
CE EMC Marking Ex tD A22 IP66 T135 (-40°C < Ta < 60°C)
Compliance with European Union EMC Vmax = 28V

Hazardous Location Certifications(1)


TABLE 1.
North American Certifications Country Restriction
Bulgaria General authorization required for outdoor use
Factory Mutual (FM) Approvals and public service
N5 FM Division 2 (Non-incendive) France Outdoor use limited to 10mW e.i.r.p.
Certificate Number: 3028321 Italy If used outside of own premises, general
Nonincendive for Class I, Division 2, Groups A,B,C, and D; authorization is required.
Dust Ignitionproof for Class II,III, Division 1, Norway May be restricted in the geographical area
within a radius of 20 km from the center of
Groups E,F, and G; Indoor/outdoor locations; Ny-Alesund.
NEMA Type 4X Romania Use on a secondary basis. Individual license
Temperature Code: T4 (Tamb=-40°C TO +60°C) required.

CONDITIONS OF INSTALLING N1 AND N7:


The Apparatus is not capable of withstanding the 500V insulation
test required by Clause 9.4 of EN 60079-15: 2005. This must be
taken into account when installing the apparatus.

(1) Includes remote antenna as required. For approval, all


cabling for Modbus, Ethernet, and power must be
shielded.

Wireless-6
Product Data Sheet
00813-0100-4420, Rev BA
Catalog 2008 - 2009 1420 Wireless Gateway
Radio Power Label - see Figure 1 - indicates output power
configuration of the radio. Devices with this label are configured for
output power less than 10 mW e.i.r.p. At time of purchase the
customer must specify ultimate country of installation and
operation.

FIGURE 1.

Radio Power Label

Wireless-7
Product Data Sheet
00813-0100-4420, Rev BA
1420 Wireless Gateway Catalog 2008 - 2009

Dimensional Drawings
FIGURE 2. 1420 Wireless Gateway

900 MHz Antenna

6.93
(170)
2.4 GHz Antenna

3.54 9.02 (229)


3.51 (90)
3.06 2.99
(89)
(78) (76)

12.03
(305)

11.15
(283)

Lower Cover
Remove for
Electrical
Connections

2.96
(75)

17.70 (449) 6.72 (170)

4.78 (121)

3.08 (78)
1.14 (29)
1/2 inch NPT
11.36
(289) Conduit
Connection
(4 Places)

1.59 (40)
3.99 (101)
Ground
Lug
NOTE
Dimensions are in inches (millimeters).

Wireless-8
Product Data Sheet
00813-0100-4420, Rev BA
Catalog 2008 - 2009 1420 Wireless Gateway

Remote Omni-Antenna Kit

WL1 WL2 WL3* WL4*


No Lightening
Arrestor

Antenna Antenna Antenna Antenna

10 ft. (3,0 m)
20 ft. (6,1 m) cable
cable
Lightening
Arrestor
Lightening Interchangeable Interchangeable
Arrestor cables cables

50 ft. (15,2 m)
50 ft. (15,2 m) cable 30 ft. (9,1 m) 40 ft. (12,2 m)
cable cable cable
Lightening
Arrestor

The Remote Omni-Antenna kit includes sealant tape for remote antenna connection, as well as mounting brackets
for the antenna, Lightning Arrestor, and the 1420.
W1 is used in indoor applications with the 1420 and remote antenna mounted indoors.
W2 is used in outdoor applications with the 1420 and remote antenna mounted outdoors.
W3 and W4 are for applications where the 1420 is mounted indoors, the Lightening Arrestor is mounted on
the exterior wall, and the remote antenna is mounted outdoors.
*Note that the cables on the Wireless Options WL3 and WL4 are interchangeable.

Wireless-9
Product Data Sheet
00813-0100-4420, Rev BA
1420 Wireless Gateway Catalog 2008 - 2009

Ordering Information
Model Product Description
1420 Wireless Gateway
Code Power Input
A 24 VDC
Code Output
1 RS485 + Ethernet
2 RS485 + Redundant Ethernet
3 RS485 + Fiber Optic Ethernet
Code Operating Frequency and Protocol
A1 HART, Self-Organizing Network - 2.4 GHz DSSS
A2 HART, Self-Organizing Network - 900 MHz FHSS
Code RS-485 Communication
N No RS-485 Communication
A Modbus RTU
Code Ethernet Communication
0 Webserver and Modbus TCP/IP
1 OPC with Webserver and Modbus TCP/IP
2 AMS Ready Connectivity with Webserver and Modbus TCP/IP
4 AMS Ready Connectivity with OPC, Webserver and Modbus TCP/IP
Code Other Options
Software Configuration
C1 Custom Software Configuration
Product Certifications
N5 FM Division 2, Dust Ignition-proof
N6 CSA Division 2, Dust Ignition-proof
N1 ATEX Type n
ND ATEX Dust Ignition-proof
N7 IECEx Type n
NF IECEx Dust Ignition-proof
Adapters
J1 CM 20 Conduit Adapter
J2 PG 13.5 Conduit Adapter
Wireless Options(1)(2)
WL1 Remote Omni-Antenna Kit, 50 ft. (15.2 m) cable
WL2 Remote Omni-Antenna Kit, 50 ft. (15.2 m) cable, Lightning Arrestor
WL3 Remote Omni-Antenna Kit, 20 ft. (6.1 m) and 30 ft. (9.1 m) cables, Lightning Arrestor
WL4 Remote Omni-antenna Kit, 10 ft. (3.0 m) and 40 ft. (12.2 m) cables, Lightning Arrestor
Typical Model Number: 1420 A 1 A2 A 2 C1 N5

(1) The WL1 - WL4 options may not be available in all world areas.

(2) The WL1 - WL4 options require minor assembly.

Wireless-10
Product Data Sheet
00813-0100-4420, Rev BA
Catalog 2008 - 2009 1420 Wireless Gateway

Wireless-11
Product Data Sheet
00813-0100-4420, Rev BA
Catalog 2008 - 2009 1420 Wireless Gateway

Standard Terms and Conditions of Sale can be found at www.rosemount.com\terms_of_sale

The Emerson logo is a trade mark and service mark of Emerson Electric Co.
Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc.
PlantWeb is a registered trademark of one of the Emerson Process Management group of companies.
All other marks are the property of their respective owners.
Modbus is a trademark of Modicon, Inc.
Cover Photo: 1420\1420_B_W.tif

Emerson Process Management


Rosemount Inc. Emerson Process Management Emerson Process Management Asia
8200 Market Boulevard Heath Place Pacific Private Limited
Chanhassen, MN 55317 USA Bognor Regis 1 Pandan Crescent
T (U.S.) 1-800-999-9307 West Sussex PO22 9SH Singapore 128461
T (International) (952) 906-8888 England T (65) 6777 8211
F (952) 949-7001 Tel 44 (1243) 863 121 F (65) 6777 0947
Fax 44 (1243) 867 554 Enquiries@AP.emersonprocess.com
www.rosemount.com

¢00813-0100-4023u¤
© 2008 Rosemount Inc. All rights reserved.
Product Data Sheet
July 2013
804010EN, Rev AA

Rosemount 2410 Tank Hub

 Collects and transfers tank data  Calculates average temperature, observed


density and strapping table based volume
 Communicates with devices on one or several
tanks via the intrinsically safe Tankbus  Supports auto-configuration of the Tankbus

 Provides power to the field units via the  Can be equipped with two configurable output
two-wire Tankbus relays, and a separate relay for SIL

 Features several control room communication  Can be equipped with analog input and output
possibilities, including Modbus, emulation of
other vendors and IEC 62591 (WirelessHART)  Includes write protection functions
Rosemount 2410 July 2013

Rosemount 2410 Tank Hub, for single or multiple tanks


Communication between tanks and Data handling and calculation
control room Rosemount 2410 collects measurement values, such as level,
temperature, and pressure.
Rosemount 2410 is handling communication between the field
devices and the control room, and it is available in two versions, It calculates average temperature, observed density and
for single or multiple tanks. It also feeds power to the units on strapping table based volume.
the Tankbus. Such data can be presented on the optional integrated back-lit
Tankbus display, a separate 2230 display, or be sent to TankMaster or a
host system.
2410
Tank Hub Data security
Rosemount TankRadar

All tank hubs have a software write protection function. In


Ext. pwr
RS-232
USB

On - TERM - Off
Rx
Tx

Lo - GAIN - Hi

FBM 2180

addition, the Rosemount 2410 with display option is equipped


Control with a hardware write protection switch.
Room
The Rosemount 2410 Tank Hub handles communication from Control room communication
the field devices on the Tankbus to the control room.
Rosemount 2410 has slots for two independent communication
Tankbus communication boards (primary and secondary fieldbus) for TRL2 Modbus,
RS485 Modbus, emulation and wireless communication.
The 2410 Tank Hub communicates with the devices on one or
several tanks via the intrinsically safe Tankbus. The Tankbus
complies with FISCO (Fieldbus Intrinsically Safe Concept) Existing host system from
FOUNDATION™ fieldbus. other vendor

By using FISCO, there is no need to take entity parameters into Gauges from other
considerations. This makes interconnection of devices easy. vendor in an existing
system
CIU858

In addition, the available power from a FISCO power supply is


higher compared to a conventional entity power supply. This 2410
enables connection of more devices on the Tankbus.

Autoconfiguration of Tankbus 5900S


The 2410 supports auto-configuration of the Tankbus within the 5400 or
Rosemount Tank Gauging system. It acts as a FOUNDATION™ 5300
fieldbus master on the Tankbus, which means it identifies and
auto-addresses the different field devices in the network,
manages communication, and supervises the status of all
connected devices.
Emulation: The tank hub enables replacement of old mechanical/servo
gauges with 5900S level gauges, or 5300/5400 transmitters using the
existing tank openings, field cabling, and control system.

Contents
Rosemount 2410 Tank Hub, for single or multiple tanks 2 Product certifications . . . . . . . . . . . . . . . . . . . . . . . . 14
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Dimensional drawings . . . . . . . . . . . . . . . . . . . . . . . . 17
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2 www.rosemount-tg.com
July 2013 Rosemount 2410

Power supply with built-in cable Wireless communication


terminator In tank gauging systems with wireless functionality the Smart
Wireless THUM™ Adapter is used as an accessory device to the
Rosemount 2410 supplies power to the units on the Tankbus. It
2410 Tank Hub. The THUM™ Adapter acts as a wireless data link
is equipped with an integrated FISCO-certified IS barrier, has
between the Tank Hub and a Smart Wireless Gateway in a
power conditioner functionality, and built-in electronics for bus
WirelessHART field network. All available tank data such as level,
termination.
temperature etc is transmitted via the wireless THUM.
A terminator is needed at each end of the Tankbus to ensure that
the fieldbus network will have proper signal levels. All these
features enable easy setup and installation of a Rosemount Tank
Gauging system.

Output relay functionality


Rosemount 2410 can be equipped with two solid state relays
which can be configured to be controlled by level, temperature,
and water level (Non-SIL in “Rosemount 2410 Tank Hub ordering
information” on page 4). The output can be connected to an
external system for alarm indication or process control. These
relays are user configurable for normally open or closed
operation.

A third relay is dedicated for SIL overfill functionality. It is part of


a separate SIL alarm channel, which has an independent
software function, controlling the relay and providing extensive
diagnostics. This relay is activated both if the alarm level is
reached and/or if a device malfunction occurs.

It operates in a normally closed mode, and the output can be The 2410 Tank Hub connected to a Smart Wireless THUM™ Adapter
connected to an emergency shut-down (ESD) system. The with integrated connection box.

Rosemount Tank Gauging system is SIL 2 and SIL 3 certified for


overfill prevention according to IEC 61508 Part 1-7.

Analog input/output
The 2410 Tank Hub can be ordered with:

 An analog input which can be used for connection of hybrid


calculation pressure transmitters or

 An analog output for connection to a host system

www.rosemount-tg.com 3
Rosemount 2410 July 2013

Ordering information
Rosemount 2410 Tank Hub
Additional information
Specifications: page 9
Certifications: page 14
Dimensional drawings: page 17

Table 1. Rosemount 2410 Tank Hub ordering information


Model Product Description - Pos 1
2410 Tank Hub
Tankbus: Number of Tanks - Pos 2
S Single tank
M Multiple tanks (Maximum 5 Rosemount 5300/5400 transmitters can be connected to one Tank Hub)
Tankbus: Power and Communication - Pos 3
F Intrinsically safe FOUNDATION™ fieldbus (IEC 61158) power supply
Primary Fieldbus - Pos 4
R TRL2 Modbus
4 RS485 Modbus
E(1) Enraf Bi-phase Mark GPU
Secondary Fieldbus - Pos 5
R(2) TRL2 Modbus
E Enraf Bi-phase Mark GPU
W(3) WirelessHART (IEC 62591) connectivity (IS)
A(4) Analog Output 4-20 mA/HART, active (Non-IS)
C(4) Analog Output 4-20 mA/HART, active (IS)
B(5) Analog Output 4-20 mA/HART, passive (Non-IS)
D(5) Analog Output 4-20 mA/HART, passive (IS)
6(6) Analog Input 4-20 mA/HART, active (Non-IS)
8(6) Analog Input 4-20 mA/HART, active (IS)
7(7) Analog Input 4-20 mA/HART, passive (Non-IS)
9(7) Analog Input 4-20 mA/HART, passive (IS)
F(8) None, but ready for upgrade of secondary bus
0 None
Relay Output (SIS/SIL) - Pos 6
3(9) (10) SIL 3-certified output as per IEC 61508
2(9) (11) SIL 2-certified output as per IEC 61508
F(12) None, but ready for upgrade of safety certification (SIS)
0 None
Relay Output (Non-SIS/SIL) - Pos 7
2 Two (2xSPST)
1 One (1xSPST)
F None. Ready for upgrade of Relay Output (Non-SIS/SIL)
0 None

4 www.rosemount-tg.com
July 2013 Rosemount 2410

Table 1. Rosemount 2410 Tank Hub ordering information


Integral Display - Pos 8
1 LCD
0 None
Power Supply - Pos 9
P Extended input range: 48-240 VAC at 50/60 Hz, and 24-48 VDC
Software - Pos 10
S Standard
Hazardous Location Certification - Pos 11
E1 ATEX Flameproof with intrinsically safe output
E2 Brazil Inmetro Flameproof
E5 FM-US Explosionproof with intrinsically safe output
E6 FM-Canada Explosionproof with intrinsically safe output
E7 IECEx Flameproof with intrinsically safe output
K1 ATEX Flameproof + FM-US Explosionproof
K3 ATEX Flameproof + IECEx Flameproof
K4 FM-US Explosionproof + FM-Canada Explosionproof
NA No hazardous location certification
Custody Transfer Type Approval - Pos 12
R(13) OIML R85 E 2008 performance certification
C PTB Eich (Approval plate and sealing kit included)
E TJA (Estonia W&M approval)
N NMi (the Netherlands W&M approval)
0 None
Housing - Pos 13
A Standard enclosure (Polyurethane-covered aluminum. IP 66/67)
Cable/Conduit Connections - Pos 14
1(14) ½-14 NPT and ¾-14 NPT
2(15) M20 x 1.5 and M25 x 1.5 adapters
G(16) Metal cable glands (½-14 and ¾-14 NPT)
E(17) Eurofast male, ½-14 NPT and ¾-14 NPT
M(17) Minifast male, ½-14 NPT and ¾-14 NPT
Mechanical Installation - Pos 15
P Mounting kit for both wall and pipe installation (1-2 in. vertical or horizontal pipes)
W Mounting kit for wall installation
0 None
Options - none or multiple selections are possible
QT(18) IEC 61508 certificate and FMEDA-data
ST Engraved SST tag plate
U1 TÜV/DIBt WHG Approval for Overfill protection (at least one relay must be selected, Pos 6 and/or Pos 7)
Typical Model Number: 2410 S F R 0 3 2 1 P S E1 R A 1 P ST

(1) Requires Secondary Fieldbus (Pos 5), code A-F, W, 0, 6-9.

(2) Requires Primary Fieldbus (Pos 4) code R or 4.

(3) Requires a separate Smart Wireless THUM Adapter (not included, to be ordered as a separate item). Maximum Tankbus (FF) current is reduced to 200 mA.

(4) For connection to a 3rd party system. Integrated power supply. Maximum Tankbus current is reduced to 200 mA.

(5) For connection to a 3rd party system.

www.rosemount-tg.com 5
Rosemount 2410 July 2013

(6) For connection of a 3rd party instrument. Integrated power supply. Max Tankbus current reduced to 200 mA.

(7) For connection of a 3rd party instrument.

(8) Requires Relay Output (Pos 6) code 0 or F.

(9) Requires Secondary Fieldbus (Pos 5), code 0 and Tankbus (Pos 2) code S, or
Primary Fieldbus (Pos 4) code 4 and Secondary Fieldbus (Pos 5) code W, C, D, 8 or 9 and Tankbus (Pos 2) code S.

(10) Requires Rosemount 5900S with safety Certification (SIS), code 3.

(11) Requires Rosemount 5900S with safety Certification (SIS), code 2.

(12) Requires Secondary Fieldbus (Pos 5), code 0 or F and Tankbus (Pos 2) code S.

(13) Requires a Rosemount 5900S gauge with the corresponding custody transfer approval. A Rosemount 2230 display or TankMaster is required for an approved
read-out.

(14) Female thread. Includes 3 plugs.

(15) Female thread. Includes 3 plugs, and 3 adapters.

(16) Min. temperature -20 °C (-4 °F). ATEX / IECEx Exe approved. Includes 3 plugs, and 3 glands.

(17) Includes 3 plugs.

(18) Requires Relay Output (Pos 6) code 2 or 3 (SIL 3 or SIL 2).

6 www.rosemount-tg.com
July 2013 Rosemount 2410

Rosemount Smart Wireless THUM™ Adapter Assembly

 2-or 4-wire HART™ devices

 Flexibility to meet your most demanding applications

 Wireless output with >99% data reliability delivers rich HART data, protected by
industry leading security

 Gain access to additional HART information, such as diagnostics or multivariable data

 Add wireless to almost any measurement point

Additional information
Specifications: page 9
Certifications: page 14
Dimensional drawings: page 17
Table 2. Rosemount Smart Wireless THUM™ Adapter Assembly ordering information
Model Product Description - Pos 1
(1)
775 Smart Wireless THUM Adapter
Output - Pos 2
X Wireless
Housing - Pos 3
D Aluminum
Mounting Connection - Pos 4
2 M20 conduit adapter
Plantweb functionality - Pos 5
1 HART data
Certification - Pos 6
NA No approval
I1 ATEX intrinsically safe
I2 INMETRO intrinsically safe
I3 NEPSI
I4 TIIS
I5 FM intrinsically safe, non-incendive
I6 CSA intrinsically safe
I7 IECEx intrinsically safe
N1 ATEX Type n
N2 INMETRO Type n
N7 IECEx Type n
IP KOSHA intrinsically safe
IW CCOE intrinsically safe
IM GOST intrinsically safe
Wireless Transmit Rate - Pos 7
WA User configurable burst rate
Operating Frequency and Protocol - Pos 8
3 2.4 GHz DSSS, IEC 62591 (WirelessHART)

www.rosemount-tg.com 7
Rosemount 2410 July 2013

Table 2. Rosemount Smart Wireless THUM™ Adapter Assembly ordering information


Wireless Antenna - Pos 9
WK Omnidirectional integral antenna
SmartPower™ - Pos 10
9 Power scavenging
Device Connection - Pos 11
T 2410 Tank Hub connection
Cable / Conduit Connection - Pos 12
0 None
J(2) Metal cable gland M20 x 1.5
F ½ NPT Adapter (female thread)
Options - none or multiple selections are possible
PT Printed tag for unit identification
Typical Model Number: 775 X D 2 1 I1 WA 3 WK 9 T F PT

(1) Requires THUM Connection Box (Pos 11+).

(2) Min. temperature -20 °C (-4 °F). ATEX / IECEx.

8 www.rosemount-tg.com
July 2013 Rosemount 2410

Specifications

Table 3. Rosemount 2410 Tank Hub specifications


General
Product Rosemount 2410 Tank Hub
Single tank version • Supports one 5900S 2-in-1 gauge or two radar level gauges, type 5300, 5400, or 5900S
• Total Observed Volume (TOV) calculation with 100-point strapping table
Multiple tank version For a 5300/5400/5900S system configuration:
• The software supports 16 field devices and 10 tanks per hub
• Maximum five gauges, type 5300 or 5400 per hub
• Hybrid calculations (mass and density) for up to three tanks
• Total Observed Volume (TOV) calculation with 100-point strapping table for one tank
The actual number of tanks/instruments a hub supports depends on the configuration, which types of
units are connected and how many. For more information, see “Power budget” on page 12
Examples of connected field devices Radar Level Gauges (type 5900S(1), 5300, and 5400), 2240S Multi-input Temperature Transmitter,
644 Temperature Transmitter, Temperature /Water Level Sensors, 3051S Scalable Pressure Transmitter,
2230 Graphical Display
Start-up time Less than 30 s
Legal custody transfer type approval OIML R85:2008, and national certifications such as PTB, NMi etc
Hazardous location certifications ATEX, FM-C, FM-US, IECEx, and national certifications. For details, see “Product certifications” on page 14
and “Rosemount 2410 Tank Hub ordering information” on page 4
Safety/overfill SIL 2 and SIL 3 certified (for more information see Rosemount Raptor Tank Gauging System Data
Sheet (704010EN), and “Product certifications” on page 14)
TÜV tested and WHG approved for overfill prevention. For more details, see “Product certifications” on
page 14. For other national approvals, consult your local Rosemount Tank Gauging representative
Communication / Display /Configuration
Tankbus The intrinsically safe side of the Rosemount 2410 connects to the Tankbus which communicates with
field devices on the tank using FOUNDATION™ fieldbus
Fieldbus Primary fieldbus: Rosemount 2410 communicates with a host or a field communication unit via TRL2
Modbus, RS485 Modbus, Enraf or HART
Secondary fieldbus: TRL2 Modbus, Enraf (other options available soon), WirelessHART for Smart
Wireless THUM™ Adapter
Relay outputs SIL safety relay output: One SIL 2/SIL 3 certified relay is available for overfill prevention.
This non-intrinsically safe solid state relay is closed/energized during normal operation
Maximum voltage and current: 260 VAC/VDC, 80 mA
Single pole
Relay outputs (Non-SIL): Maximum two relays, controlled by 10 independent virtual relay functions
which can be configured for different tanks and process variables.
The two non-intrinsically safe solid state relays are user configurable for normally energized or
de-energized operation.
Maximum voltage and current: 350 VAC/VDC, 80 mA
Single pole

www.rosemount-tg.com 9
Rosemount 2410 July 2013

Table 3. Rosemount 2410 Tank Hub specifications


Analog input/output Analog input
Maximum number of input channels: 1
Input Current range: 0-23 mA
Configurable Min and Max alarm limits.

Lift-off voltage (Passive IS and NON-IS): 10.5 V


Max input voltage (Passive IS and NON-IS): 30 V

Output voltage (Active):


Non-IS: 22 ±2.0 V (open loop); 20.8 ±2.0 V @3,75 mA; 14.8 ±2.0 V @21.75 mA
IS: 21 ±2.0 V (open loop); 18.8 ±2.0 V @3,75 mA; 8.2 ±2.0 V @21.75 mA
See “Product certifications” for IS parameters

HART master:
Maximum 5 HART Slave Devices (Passive).
Maximum 3 HART Slave Devices (Active).

Analog output
Maximum number of output channels: 1
Output range: 3.5-23 mA
SW Configurable High and Low Alarm Limits.
Separate SW Configurable Alarms for process failures and HW failure.
Low voltage and invalid loop current detection.

Lift-off voltage (Passive IS and NON-IS): 10.5 V


Max input voltage (Passive IS and NON-IS): 30 V

Output voltage (Active):


Non-IS: 22 ±2.0 V (open loop); 22.8 ±2.0 V @3,75 mA; 16.8 ±2.0 V @21.75 mA
IS: 21 ±2.0 V (open loop); 20.8 ±2.0 V @3,75 mA; 10.2 ±2.0 V @21.75 mA

See “Product certifications” for IS parameters


HART slave configurable HART 5 or HART 7 (HCF registration is pending, HART 5 default)
Integral display output variables The integral digital read-out display can toggle between: level, level rate, ullage, signal strength, volume
(TOV), liquid average temperature, 1-16 spot temperature, vapor average temperature, ambient
temperature, free water level, vapor pressure, liquid pressure, air pressure, observed density, reference
density, and flow rate.
Display output units(2) Level, free water level, and ullage: meter, millimeter, feet, or imperial 1/16
Level rate: meter/second, meter/hour, feet/second, or feet/hour
Flow rate: meter³/hour, liter/minute, barrel/hour, or US gallon/hour
Total Observed Volume (TOV): meter³, liters, barrel, or US gallon
Temperature: °F, °C, or °K
Pressure: psi, psiA, psiG, bar, barA or barG, atm, Pa, or kPa
Density: kg/m³, °API, or 60/60DegF
Signal strength: mV
Configuration tools Rosemount TankMaster
Autoconfiguration support Yes (Tankbus addressing)
Electric
Power supply (nominal values) 24-48 VDC (-15% to +10%)
48-240 VAC (-15% to +10%), 50/60 Hz
Power consumption Max. 20 W depending on configuration
Tankbus cabling 0.5-1.5 mm² (AWG 22-16), twisted shielded pairs
Power and relay cabling 0.5-2.5 mm² (AWG 22-14), twisted shielded pairs
Maximum Tankbus cable lengths Depends on cable. For details see the Rosemount Raptor Tank Gauging System Data Sheet (704010EN)
Built-in Tankbus terminator Yes (to be disconnected if required)

10 www.rosemount-tg.com
July 2013 Rosemount 2410

Table 3. Rosemount 2410 Tank Hub specifications


Mechanical
Housing material Polyurethane-covered die-cast aluminum
Cable entry (connection/glands) Non-IS side: Two ½ - 14 NPT and Two ¾ - 14 NPT entries for cable glands or conduits
IS side: Two ½ - 14 NPT entries for cable glands or conduits
Three metal plugs to seal any unused ports are included in the delivery
Optional:
• M20 x 1.5 and M25 x 1.5 conduit / cable adapter
• Cable glands in metal (½ - 14 NPT and ¾ - 14 NPT)
• 4-pin male Eurofast connector or A size Mini 4-pin male Minifast connector
Installation Can be installed on a 33.4-60.3 mm (1-2 in.) diameter pipe or wall
Dimensions See “Dimensional drawings” on page 17
Weight 4.7 kg (10.4 lbs)
Environment
Ambient temperature -40 to 70 °C (-40 to 158 °F). Minimum start-up temperature is -50 °C (-58 °F).
With LCD display: -25 to 70 °C (-13 to 158 °F)
Storage temperature -50 to 85 °C (-58 to 185 °F)
With LCD display: -40 to 85 °C (-40 to 185 °F)
Humidity 0 - 100% relative humidity
Ingress protection IP 66 and IP 67 (Nema 4X)
Metrology sealing possibility Yes
Write protect switch Yes
Transient / built-in lightning protection According to IEC 61000-4-5, level 4 kV line to ground. Complies with IEEE 587 Category B transient
protection and IEEE 472 surge protection

(1) One Rosemount 5900S with 2-in-1 solution or maximum two Rosemount 5900S gauges installed on separate tanks can be connected to one tank hub. If two
Rosemount 5900S gauges are installed on the same tank, two separate tank hubs are required.

(2) Density, mass, and more volume parameters are calculated in Rosemount TankMaster (GOV, GSV, NSV, WIA/WIV).

Table 4. Fieldbus combination matrix


Primary fieldbus options
TRL2 RS485 ENRAF A_OUT PASSIVE (NON-IS) A_IN PASSIVE (NON-IS)
Code R 4 E B 7
TRL2 R Yes Yes No No No
ENRAF E Yes Yes No No No
WIRELESSHART (IEC62591) W Yes SIL Yes Yes Yes
A_OUT ACTIVE (IS) C Yes SIL Yes No No
Secondary fieldbus options

A_OUT ACTIVE (NON-IS) A Yes Yes Yes No No


A_OUT PASSIVE (IS) D Yes SIL Yes No No
A_OUT PASSIVE (NON-IS) B Yes Yes Yes No No
A_IN ACTIVE (IS) 8 Yes SIL Yes No No
A_IN ACTIVE (NON-IS) 6 Yes Yes Yes No No
A_IN PASSIVE (IS) 9 Yes SIL Yes No No
A_IN PASSIVE (NON-IS) 7 Yes Yes Yes No No
A_IN ACTIVE (IS) 8 Yes SIL Yes No No
None 0 SIL SIL SIL No No
READY FOR UPGRADE F Yes Yes Yes No No
SIL = Primary fieldbus and secondary fieldbus in combination = Yes, and can be combined
with SIL

www.rosemount-tg.com 11
Rosemount 2410 July 2013

Table 5. Power budget


Field device Power consumption
5900S Radar Level Gauge 50 mA
5900S Radar Level Gauge, 2-in-1 solution 100 mA
5300 or 5400 Series Radar Level Transmitter 21 mA
Rosemount 2230 Graphical Field Display 30 mA
Rosemount 2240S Multi-input Temperature Transmitter 30 mA including 565, 566 and
765 temperature sensors
Rosemount 644 Temperature Transmitter 11 mA
Rosemount 3051S, and Rosemount 2051 Pressure Transmitters 18 mA

Figure 1. Cable diameter

The total cable distance A+B+C+D must not exceed the values given in Table 6.

B A

D C

D
C

B
B
A A

Table 6. Allowed cabling distances for different system configurations


Cable diameter Loop resistance Maximum cabling distance from power source to all devices on the tank
with maximum power with typical power usage of with typical power usage of
usage of 250 mA. 128 mA for 5900S, 2240S, 178 mA for 5900S 2-in-1,
2230, 3051S. 2240S, 2230, 3051S.

Distance in m (ft) Distance in m (ft) Distance in m (ft)


20 AWG (0.5 mm²) 66 /km 212 (695) 414 (1358) 298 (978)
18 AWG (0.75 mm²) 42 /km 333 (1092) 651 (2136) 468 (1535)
17 AWG (1.0 mm²) 33 /km 424 (1391) 829 (2720) 596 (1955)
16 AWG (1.5 mm²) 26 /km 538 (1765) 1000 (3281) 756 (2480)

12 www.rosemount-tg.com
July 2013 Rosemount 2410

Table 7. Smart Wireless THUM™ Adapter Assembly specifications


General
Product Smart Wireless THUM ™ Adapter. The THUM allows WirelessHART communication according to the IEC
62591 standard between the device it is connected to and the Smart Wireless Gateway. The THUM™ is
integrated with a connection box
Transmission range Application dependent. Consult factory
Hazardous location certifications FM, CSA, and ATEX (see “Rosemount Smart Wireless THUM™ Adapter Assembly ordering information”
on page 7) and the Smart Wireless THUM™ Product Data Sheet (document number 00813-0100-4075)
Communication
Communication protocol IEC 62591 (WirelessHART)
Radio characteristics • Standard IEEE 802.15.4 radio
• 2.4 GHz ISM band sliced into 16 radio-channels
• Continually “hop” across channels to avoid interference and increase reliability
• Direct sequence spread spectrum (DSSS) delivers high reliability in challenging radio environment
Update rate User selectable, 8 seconds to 60 minutes
Electric
Power supply Powered by Rosemount 2410 tank hub
Output cabling Shielded twisted pair wiring, 0.5-2.5 mm² (AWG 22-14). Maximum cable length depends on cable
characteristics
IS parameters Ui=30 V, Ii=200 mA, Pi=1.0 W, Ci=Li=0
Mechanical
Housing / enclosure Polyurethane painted, low-copper aluminum housing
Cable entry (connection/glands) One M20x1.5 entry for cable gland or conduit adapter
Optional:
• Metal cable gland M20x1.5
• ½ NPT adapter (female thread)
Installation The THUM can be installed on a vertical or horizontal 1 to 2-in. pipe, away from the Tank Hub at the best
possible tank roof position. It should be positioned approximately 2 m (6 ft) or more from any large
structure or conductive surface
Dimensions See “Dimensional drawings” on page 17
Antenna Polybutadine terephthalate (PBT) / polycarbonate (PC) integrated omnidirectional antenna
Weight Connection box and THUM adapter: 2.0 kg (4.4 lbs.)
Environment
Ambient temperature -40 to 85 °C (-40 to 185 °F)
Storage temperature -40 to 85 °C (-40 to 185 °F)
Humidity 0 - 100% relative humidity
Ingress protection IP 66 and NEMA 4X
Electromagnetic compatibility (EMC) Meets all relevant requirements of EN 61326-1 (2006) and (2004/108/EC). The THUM™ and tank hub
should be installed with shielded wiring
Approvals FCC part 15, R&TTE (99/5/EC), and IC (RSS210). See above for hazardous location certifications

NOTE
For more information, see the Smart Wireless THUM™ Adapter Product Data Sheet
(document number 00813-0100-4075)

www.rosemount-tg.com 13
Rosemount 2410 July 2013

Product certifications
CE mark HART/4-20 mA Entity IS I/O Option:
Complies with applicable EU directives (EMC, ATEX) Active Current Loop:
II 2(1) G 0575

Ordinary location certification Ex de [ia IIC] IIB T4 (-50 °C  Ta  +70 °C)


Complies with FM 3810:2005 and CSA: C22.2 No. 1010.1 Uo=23.1 VDC, Io=95.3 mA, Po=550 mW
Group IIC: Co 0.14 µF, Lo  3.9 mH
OIML R85:2008 Group IIB: Co 1.0 µF, Lo  15 mH
The OIML metrology certificate, issued by the SP Technical Research Group IIA: Co 3.67 µF, Lo  33 mH
Institute of Sweden, covers the Raptor Tank Gauging system, including
the level gauges equipped with different antennas. Passive Current Loop:
Certificate number is R85/2008-SE-11.01. II 2(2) G 0575

Ex de [ib IIC] IIB T4 (-50 °C  Ta +70 °C)


Ui=30.0 VDC, Ii=300 mA, Ci=0 µF, Li =0 mH

US Factory Mutual (FM-US) certification


SIL certification
The SIL safety certificate, issued by exida in Switzerland, includes the SIL Certificate of Compliance: 3035492
alarm channel within the 5900S radar level gauge and the 2410 Tank
Control Drawing: 9240040-901
Hub. Both units are SIL 2 and SIL 3 capable according to IEC 61508, parts
1-7. E5(1) Explosionproof with Intrinsically Safe Output
Certificate number is Rosemount 091243 P0017 C001. Temperature Class T4
Ambient Temperature Limits -50 °C to +70 °C

FISCO Power Supply


Explosionproof Class I, Division 1, Groups C, and D
Dust-ignitionproof Class II and III, Division 1, Groups E, F, and G
German WHG certification
Associated Intrinsically Safe Class I, Division 1, Groups C and D
The certificate for the 5900S radar level gauge and the 2410 Tank Hub is
issued by DIBt (Deutsches Institute für Bautechnik) according to the Class I Zone 1 AEx de [ib] IIB
German WHG regulations for overfill prevention. It is based on technical Uo=15 VDC, Io=354 mA, Po=5.32 W
evaluation and testing conducted by TÜV NORD CERT GmbH.
HART/4-20 mA Entity IS I/O Option:
Certificate number is Z-65.16-500.
Active Current Loop:
XP-AIS CL I, DIV. 1 GP C & D

AEx de[ia IIC] IIB


Uo=23.1 VDC, Io=95.3 mA, Po=550 mW
Group IIC: Co 0.14 µF, Lo  3.9 mH
Hazardous location certifications for Group C, IIB: Co 1.0 µF, Lo  15 mH
Group D, IIA: Co 3.67 µF, Lo  33 mH
Rosemount 2410
Passive Current Loop:
European ATEX Directive Information AEx de [ib IIC] IIB
Ui=30.0 VDC, Ii=300 mA, Ci=0 µF, Li =0 mH
EC-Type Examination Certificate Number: FM10ATEX0012
Control Drawing: 9240040-901

E1(1) Flameproof with Intrinsically Safe Output

FISCO Power Supply:


II 2(2) G 0575

Ex de [ib] IIB T4 (-50 °C  Ta  +70 °C)


Uo=15 VDC, Io=354 mA, Po=5.32 W
Um=250 VDC

(1) Ordering information model code for hazardous location certification,


see page 5

14 www.rosemount-tg.com
July 2013 Rosemount 2410

Canadian Factory Mutual (FM-C) certification Hazardous location certifications for


Certificate of Compliance: 3035492C Smart Wireless THUM™
Control Drawing: 9240040-901

E6(1) Explosionproof with Intrinsically Safe Output CE mark


Complies with applicable EU directives (EMC, ATEX)
Temperature Class T4
Ambient Temperature Limits -50 °C to +70 °C
Special conditions for safe use (x), ATEX & IECEX
FISCO Power Supply:
Explosionproof Class I, Division 1, Groups C, and D The surface resistivity of the antenna is greater than one gigaohm.
Dust-ignitionproof Class II and III, Division 1, Groups E, F, and G To avoid electrostatic charge build-up, it must not be rubbed or
cleaned with solvents or a dry cloth.
Associated Intrinsically Safe Class I, Division 1, Groups C and D
The enclosure is made of aluminum alloy and given a protective
Class I Zone 1 Ex de[ib] IIB polyurethane paint finish; however, care should be taken to
Uo=15 VDC, Io=354 mA, Po=5.32 W protect it from impact or abrasion if located in a zone 0.

HART/4-20 mA Entity IS I/O Option:


European Directive information
Active Current Loop:
The EC declaration of conformity for all applicable European directives
XP-AIS CL I, DIV. 1 GP C & D
for this product can be found at www.rosemount.com. A hard copy may
Ex de[ia IIC] IIB be obtained by contacting an Emerson Process Management
Uo=23.1 VDC, Io=95.3 mA, Po=550 mW representative.
Group IIC: Co 0.14 µF, Lo  3.9 mH
Group C, IIB: Co 1.0 µF, Lo  15 mH ATEX DIRECTIVE (94/9/EC)
Group D, IIA: Co 3.67 µF, Lo  33 mH Emerson Process Management complies with the ATEX Directive.
Passive Current Loop:
Ex de [ib IIC] IIB ELECTROMAGNETIC COMPABILITY (EMC) (2004/108/EC)
Ui=30.0 VDC, Ii=300 mA, Ci=0 µF, Li =0 mH Emerson Process Management complies with the EMC Directive.

IECEx certification RADIO AND TELECOMMUNICATIONS TERMINAL EQUIPMENT DIRECTIVE


Certification of Conformity Number: IECEx FMG 10.0005 (R&TTE) (1999/5/EC)
Control Drawing: 9240040-901 Emerson Process Management complies with the R&TTE directive.

E7(1) Flameproof with Intrinsically Safe Output (FISCO) Telecommunication compliance


FISCO Power Supply: All wireless devices require certification to ensure that they adhere to
Ex de [ib] IIB Gb T4 (-50 °C  Ta  +70 °C) regulations regarding the use of the RF spectrum. Nearly every country
requires this type of product certification. Emerson is working with
Uo=15 VDC, Io=354 mA, Po=5.32 W, Um=250 VDC governmental agencies around the world to supply fully compliant
products and remove the risk of violating country directives or laws
HART/4-20 mA Entity IS I/O Option:
governing wireless device usage.
Active Current Loop:
Ex de [ia IIC Ga] IIB Gb T4 (-50 °C  Ta +70 °C)
FCC and IC
Uo=23.1 VDC, Io=95.3 mA, Po=550 mW This device complies with Part 15 of the FCC Rules. Operation is subject
Group IIC: Co 0.14 µF, Lo  3.9 mH to the following conditions: This device may not cause harmful
Group IIB: Co 1.0 µF, Lo  15 mH interference. This device must accept any interference received,
Group IIA: Co 3.67 µF, Lo  33 mH including interference that may cause undesired operation. This device
must be installed to ensure a minimum antenna separation distance of
Passive Current Loop: 20 cm (8 in.) from all persons.
Ex de [ib IIC Gb] IIB Gb T4 (-50 °C  Ta +70 °C)
Ui=30.0 VDC, Ii=300 mA, Ci=0 µF, Li =0 mH Ordinary location certification for FM
As standard, the transmitter has been examined and tested to
Combination Approvals determine that the design meets basic electrical, mechanical, and fire
K1=E1+E5 (ATEX + FM-US) protection requirements by FM, a nationally recognized testing
K3=E1+E7 (ATEX + IECEx) laboratory (NRTL) as accredited by the Federal Occupational Safety and
K4=E5+E6 (FM-US+FM-C) Health Administration (OSHA).

For more information on product certificates, refer to the Rosemount European ATEX Directive information
2410 Reference manual (document number 300530EN).
I1(1) ATEX Intrinsic Safety
Certificate No.: Baseefa09ATEX0125X II 1G
Ex ia IIC T4 (-50 °C Tamb 70 °C)
IP66. Ui=30 V, Li=200 mA, Pi=1.0 W, Ci=0, Li =0
1180

(1) Ordering information model code for certification, see page 7

www.rosemount-tg.com 15
Rosemount 2410 July 2013

N1(1) ATEX Type n For more information, see the Smart Wireless THUM™ Adapter product
Certificate No.: Baseefa09ATEX0131 II 3G data sheet (document number 00813-0100-4075)
Ex na IIC T4 (-50 °C Tamb 70 °C)
IP66. Ui=45 Vdc max.
1180

Factory Mutual (FM) Approvals

I5(1) FM Intrinsic Safety and Non-incendive


Intrinsically Safe for Class I/II/III, Division 1,
Groups A, B, C, D, E, F, and G.
Zone Marking: Class I, Zone 0, AEx ia llC
Temperature Codes T4 (-50 °C Tamb 70 °C)
Non-incendive for Class I, Division 2, Groups A, B, C, and D.
Intrinsically safe and non-incendive when installed according to
Rosemount drawing 9240040-901
Enclosure Type 4X/IP66

CSA - Canadian Standards Association

I6(1) CSA Intrinsic Safety


Intrinsically Safe for Class I, Division 1, Groups A, B, C, and D.
T3C (-50 °C Tamb 70 °C)
Intrinsically safe when installed according to Rosemount drawing
9240040-901
Suitable for Class I, Division 2, Groups A, B, C, and D

IECEx certifications

I7(1) IECEx Intrinsic Safety


Certificate No.: IECEx BAS 09.0050X
Ex ia IIC T4 (-50 °C Tamb 70 °C)
IP66. Ui=30 V, Li=200 mA, Pi=1.0 W, Ci=0, Li =0

N7(1) IECEx Type n


Certificate No.: IECEx BAS 09.0058
Ex na IIC T4 (-50 °C Tamb 70 °C)
IP66. Ui=45 Vdc max.

INMETRO certifications

I2(1) INMETRO Intrinsic Safety


BR-Ex ia IIC T4 (-50 °C Tamb 70 °C) Ga

N2(1) INMETRO Type n


BR-Ex na IIC T4 Gc(-50 °C Tamb 70 °C)

China (NEPSI) certifications

I3(1) China (NEPSI) Intrinsic Safety


Ex ia IIC T4

CCoE certifications

IW(1) Intrinsic Safety


Ex ia IIC T4

KOSHA certifications

IP(1) Intrinsic Safety


Ex ia IIC T4

GOST certifications

IM(1) Intrinsically Safe


Ex ia IIC T4 (-50 °C Tamb 70 °C)
Ex na IIC T4 (-50 °C Tamb 70 °C)
IP66

16 www.rosemount-tg.com
July 2013 Rosemount 2410

Dimensional drawings Dimensions are in mm (inches)

Figure 2. Rosemount 2410 Tank Hub dimensions

193 (7.6) 254 (10)

164 (6.5)

Figure 3. Smart Wireless THUM™ Adapter Assembly dimensions

Vertical orientation of
THUM Adapter

145 (5.7)

30 (1.2)

120 (4.7) 82 (3.2)

Mounting kit for


vertical or horizontal
106 (4.2) installation

122 (4.8)
Fits 33.4-60.3 mm (1-2 in.) pipe diameters

www.rosemount-tg.com 17
Rosemount 2410 Product Data Sheet
804010EN, Rev AA July 2013

Emerson Process Management Emerson Process Management


Rosemount Tank Gauging Rosemount Tank Gauging North America Inc.

Box 130 45 6005 Rogerdale Road


SE-402 51 Göteborg Mail Stop NC 136
SWEDEN 77072 TX Houston
Tel: +46 31 337 00 00 United States
Fax: +46 31 25 30 22 Primary Phone: +1 281 988 4000
E-mail: sales.rtg@emerson.com Secondary Phone: +1 800 722 2865
www.rosemount-tg.com E-mail: sales.rtg.hou@emerson.com

Emerson Process Management Emerson Process Management


Asia Pacific Pte Ltd Rosemount Tank Gauging Middle East & Africa.

1 Pandan Crescent P. O Box 20048


SINGAPORE 128461 Manama
Tel: +65 6777 8211 Bahrain
Fax: +65 6777 0947 Tel: +973 1722 6610
Email: specialist-itg.rmt-ap@ap.emersonprocess.com Fax: +973 1722 7771
E-mail: rtgmea.sales@emerson.com

Standard Terms and Conditions of Sale can be found at www.rosemount.com\terms_of_sale


The Emerson logo is a trade mark and service mark of Emerson Electric Co.
Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc.
PlantWeb is a registered trademark of one of the Emerson Process Management group of companies.
HART and WirelessHART are registered trademarks of the HART Communication Foundation
All other marks are the property of their respective owners.
© 2013 Rosemount Inc. All rights reserved.

You might also like