Professional Documents
Culture Documents
Chemical Anchors
Foil capsule adhesive anchor HVU & Adhesive anchor system HVU-TZ Page 196-197
Slow-cure injection system HIT-RE 500-SD Page 200
Injectable mortar Hilti HIT-HY 200-A Page 203
Injectable mortar HIT-MM PLUS Page 206
Injectable mortar HFX Page 207
Injectable mortar HIT-HY 70 Page 207
Flush Anchors
Drop-in (flush) anchor HKD / HKD-SR / HKV Page 231-232
Screw Anchors
Screw anchor HUS3-H 8/10/14 & HUS3-HF 10/14 HUS3-C 8/10 Page 233-234
Anchor reusability gauge HRG 8/10/14/16 Page 234
Screw anchor HUS-V Page 235
Screw anchor HUS-H 6 / HUS-H 8/10/14
Screw anchor HUS-A / HUS-I / HUS-P
Page 236
Page 237-238
9
Plastic Anchors
Frame anchor with countersunk head HRD-C Page 242
Impact anchor HPS-1 / HPS-1 R Page 243
Light-duty anchor HLD Page 244
Universal plastic anchor HUD-1 / HUD-L Page 245
Metal insulation fastener IDMS Page 246
Insulation anchor IDP Page 246
Other Anchors
Anchor Systems
Sleeve anchor (hex head) HLC / HLC-H Page 239
Sleeve anchor (closed eyebolt) HLC-EC / (counter sunk) HLC-SK Page 240
Metal frame anchor HT Page 240
Wedge anchor DBZ Page 240
Cavity anchor HHD-S Page 241
Hook and ring anchors HA 8 Page 241
Sleeve anchor with screw and washer HAM with bolt Page 241
188 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 189
Anchor Systems Anchor Systems
Application Base material Approval Anchor type Advantages Drill bit Specification Setting
diameter
resp. anchor
Through-fastening
Steel, galvanised
Hollow brick masonry
Lightweight concrete
Uncracked concrete
External thread
Internal thread
Cracked Concrete
Aerated concrete
Pre-setting
Fire tested
Approval
Mechanical anchor
systems
Heavy duty anchors
Anchor fastenings for high loads, l l l l l HDA-T/-TR/-TF/-P/-PR/-PF n Automatic undercutting Drill bit dia.: 20-30 mm l l l l l l
e.g. in steel construction and plant undercut anchor n High load capacity Anchor size: M10-M20
construction, suitable for dynamic loading n Approved for dynamic loads
Fastening heavy loads e.g. from l l l l HSL-3 heavy duty n Integrated plastic section to telescope and pull down tightly Drill bit dia.: 12-32 mm l l l l
columns, high racks, machines anchor n Special elements Anchor size: M8-M24
n The bolt can be retorqued
Fastening heavy loads e,g. from l l HSL-G-R heavy duty n Integrated plastic section to telescope and pull down tightly Drill bit dia.: 12-28 mm l l l
columns, high racks, machines anchor n Special elements Anchor size: M8-M20
n The bolt can be retorqued
Safety relevent fastening at facades l l l l HSC-A(R)/-I(R) n Automatic undercutting Drill bit dia.: 14-20 mm l l l l l
and ceilings where short embedment safety anchor n Small edge distances and spacings Anchor size: M6-M12
depth is required n Small setting depth
Fastening through in-place parts l l l l HST/-R/-HCR stud n Quick and simple setting operation Drill bit dia.: 8-24 mm l l l l l
e.g. angles, tracks, channels anchor n Setting mark Anchor size: M8-M24
wooden beams,etc. n
Safety wedge sleeve for certain follow up expansion
Fastening through in-place parts l l l HSA/-R/-F S stud n Two setting depths Drill bit dia.: 6-20 mm l l l l l
like wood beams, metal sections, anchor n Setting mark Anchor size: M6-M20
columns,brackets etc. n Extremely ductile steel for high bending capacity
Temporary fastenings in concrete l l l l HLC sleeve anchor n Short setting/removing operation Drill bit dia.: 8-16 mm l l l
(e.g. formwork), fastening in base- n Good load values in green concrete Anchor size: M6-M12
material of low density n Bridging of gaps
Fastening with threaded rods for l 1) l l l HKD push-in anchor An “intelligent”expansion section which adapts to suit the base material Drill bit dia.: 8-25 mm
n l l l l
pipe suspensions, air ducts,
suspended ceilings
n Visual verification of full expansion
n Small setting depth
Anchor size: M8-M25
9
Fastening channels, brackets, l l l l HUS-3 n Screw driven straight into base material without using an anchor Drill bit dia.: 8-14 mm l
racks, seatings screw anchor n Forged on washer
n Matched system of screw anchor and screwdriver
Light duty anchors
Various l l l l l l HUD-1 universal anchor n Fast setting 5-14 mm l l
applications n Flexibility of screw length
n An anchor for every base material 6-10 mm
HUD-L universal anchor
Fastenings to weak materials l l HLD light duty anchor n Flexibility of screw length Drill bit dia.: 10 mm l
with cavities n Resilient toggling action to suit every base material
Securing support frames, timber frames, l l l l l l l HRD-U/-S frame anchor n Preassembled with screw Drill bit dia.: 10 mm l l l
façade panels, curtain walling n Screw of steel 5.8 grade or stainless steel A4 (1.4401) Drill bit dia.: 14 mm
......
Fastening wood battens, l ¡ ¡ l ¡ HPS-1 impact anchor n Quick setting with hammer 5-8 mm l l l l
components for electrical and plumbing n 4-wings expansion Thread: M6
installations
190 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 191
Anchor Systems Anchor Systems
Application Base material Approval Anchor type Advantages Drill bit Specification Setting
diameter
resp. anchor
Through-fastening
Steel, galvanised
Hollow brick masonry
Lightweight concrete
Uncracked concrete
External thread
Internal thread
Cracked Concrete
Aerated concrete
Pre-setting
Fire tested
Approval
Light duty anchors
Fastening light channels, brackets, l 1) l l l l l l l HUS screw anchor n Screw driven straight into base material without using an anchor Drill bit dia.:6mm l l l l
interior paneling or cladding n
Small drill bit diameter
n Matched system of screw anchor and screwdriver
Fastening battens, channels panels l l HHD-S cavity anchor n Controlled setting Drill bit dia.: 8-12 mm l l
n D
eliverable with or without prefitted screw
For suspended ceilings and other l 1) l l l l HA8 ring/hook anchor n Quick and easy setting Drill bit dia.: 8 mm l l
items from concrete ceilings n Automatic follow-up expansion
Suspension from pre-stressed l l l HKH hollow deck n Approval for single point fastenings Drill bit dia.: 10-14mm l l l l
concrete hollow decks anchor n Approved for sprinkler systems Thread: M6-M10
Suspension from pre-stressed l l l HTW twin anchor n Approval for pre-stressed concrete hollow decks Drill bit dia.: 13 mm l l
concrete hollow decks n Quick setting
n No setting tools needed
Fastening of hard, self supporting l l l IDP insulation anchor n One-piece element Drill bit dia.: 8 mm l
insulating materials n Corrosion resistant insulating material
n No heat bridge thickness: 10-150 mm
Fastening of soft and hard, self supporting l l l l IZ expandable n Corrosion resistant Drill bit dia.: 8 mm l
insulating materials insulation fastener n No heat bridge insulating material
n Reliable bonding of plaster thickness up to 160 mm
Fastening of soft, non self supporting l l l IN insulation fastener n Reliable pressing on Drill bit dia.: 8 mm l 9
insulating materials
Fastening insulating material of hard l l l l l IDMS/IDMR metal n Quick and safe Drill bit dia.: 8 mm l l l
self supporting insulating material insulation fastener n Fire resistant insulating material
where non flammable material is specified thickness: up to 120 mm
Adhesive anchor
systems
Heavy duty anchors
192 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 193
Anchor Systems Anchor Systems
Application Base material Approval Anchor type Advantages Drill bit Specification Setting
diameter
resp. anchor
Through-fastening
Steel, galvanised
Hollow brick masonry
Lightweight concrete
Uncracked concrete
External thread
Internal thread
Cracked Concrete
Aerated concrete
Pre-setting
Fire tested
Approval
Heavy duty anchors
Heavy duty fastening with small spacings l l l l HVU adhesive n No expansion pressure HAS/HAS-R M8-M39 l l l l l l
and edge distances anchor n Small edge distances and spacings HIS-N/HIS-RN M8-M20
n A strong and flexible foil capsule rebar dia. 8-40 mm
Adhesive anchor for uncracked concrete l l l l HIT-RE 500 n No expansion pressure HAS/HAS-R M8 - M39 l l l l l l
n Flexibility in terms of drill bit diameter and annular gap HIS-N/HIS-RN M8 - M20
n Flexibility in terms of working time rebar dia. 8 - 40mm
Adhesive anchor for cracked / uncracked l l l l l HIT-HY 200 n No expansion pressure HAS/HAS-R M8-M24 l l l l l l
concrete n No styrene content HIS-N/HIS-RN M8-M20
n No plasticizer content rebar dia. 8-25 mm
n Environmental protection due to the minimized packaging
Adhesive anchor for hollow/solid brick masonry l l l HIT-HY 70 n Optimal keying hold HAS M6-M16 l l l l l
HIT-SC sleeve n No styrene content HIT-AN M8-M12
n Environmental protection due to the minimized packaging HIT-IG M8-M12
n Environmental protection due to the minimized packaging
Special anchors 9
Track fixing l l l HRA/HRC/HRT n EBA approval HRT M22 dia. 26 l l l
rail anchor n Serviceability tests done by the University of Munich HRC M22 dia. 22 l l l
n Complete support system HRA M22 dia. 22 l l l
194 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 195
Anchor Systems Anchor Systems
Ordering designation Anchoring elements Shelf life from Standard embedment Package contents Sales pack Item Ordering Anchor Anchoring elements Shelf life from date of manu- Standard embedment Package contents Sales pack Item
date of manu- depth quantity number designation size facture (at 23°C and 50% depth quantity number
facture (at 23°C relative humidity)
and 50% relative
HVU-TZ M10 M10 HAS-TZ torque-controlled bonded anchor 18 months 75 mm 1x Adhesive capsule 10 pc 311368
humidity)
HVU-TZ M10 ZWST
HVU M8x80 HAS threaded rods, HIS-N 18 months 80 mm 1x Adhesive capsule HVU M8x80 ZWST 10 pc 256691
HVU-TZ M20 M20 HAS-TZ torque-controlled bonded anchor 18 months 170 mm 1x Adhesive capsule 4 pc 335942
internally-threaded inserts
HVU-TZ M20x190
HVU M10x90 HAS threaded rods, HIS-N 18 months 90 mm 1x Adhesive capsule HVU M10x90 ZWST 10 pc 256692 ZWST
internally-threaded inserts
HVU M12x110 HAS threaded rods, HIS-N 18 months 110 mm 1x Adhesive capsule HVU M12x110 ZWST 10 pc 256693
internally-threaded inserts
HVU M16x125 HAS threaded rods, HIS-N 18 months 125 mm 1x Adhesive capsule HVU M16x125 ZWST 10 pc 256694
internally-threaded inserts
HVU M20x170 BULK HAS threaded rods, HIS-N 18 months 170 mm 1x Adhesive capsule HVU M20X170 ZW COMP. 150 pc 334745
internally-threaded inserts
HVU M20x170 HAS threaded rods, HIS-N 18 months 170 mm 1x Adhesive capsule HVU M20x170 ZWST 5 pc 256695
internally-threaded inserts
HVU M24x210 HAS threaded rods, HIS-N 18 months 210 mm 1x Adhesive capsule HVU M24x210 ZWST 5 pc 256696
internally-threaded inserts
HVU M27x240 HAS threaded rods, HIS-N 18 months 240 mm 1x Adhesive capsule HVU M27x240 ZWST 4 pc 256697
internally-threaded inserts
HVU M30x270 HAS threaded rods, HIS-N 18 months 270 mm 1x Adhesive capsule HVU M30x270 ZWST 4 pc 256698 9
internally-threaded inserts
HVU M33x300 HAS threaded rods, HIS-N 18 months 300 mm 1x Adhesive capsule HVU M33x300 ZWST 4 pc 256699
internally-threaded inserts
HVU M39x360 HAS threaded rods, HIS-N 18 months 360 mm 1x Adhesive capsule HVU M39x360 ZWST 2 pc 256701
internally-threaded inserts
196 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 197
Anchor
Anchor Systems
Systems Anchor
Anchor Systems
Systems
The new Hilti HIT-HY 200 injectable adhesive mortar Safe SET-system makes Hilti TE-CD and TE-YD hollow drill bits make subse-
quent hole cleaning completely unnecessary. Dust
9
your dreams come true. You can now set anchor rods or make post-installed
rebar connections using injectable adhesive mortar without having to clean the is removed by the vacuum system while drilling is in
holes. progress. You therefore also benefit from faster drilling
and a virtually dustless working environment. This
Hilti now offers an ingenious system that either removes the drilling drilling system makes rebar installation extremely reli-
dust through a hollow drill bit while drilling is in able and is ideal for large-scale, repetitive use.
progress or, when HIT-Z anchor rods
are used, makes hole cleaning
completely unnecessary. This not For anchor rods.
only speeds up the job and thus
No cleaning required.
saves valuable time, it also gives
you a decisive extra safety margin. Thanks to the special design of Hilti HIT-Z anchor rods,
you’re always on the safe side – even in water-saturated
Find out more at: and uncleaned holes. The unique shape of the anchor
www.hilti.com/HY200 rod makes hole cleaning completely unnecessary.
198 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 199
Anchor Systems Anchor Systems
Slow-cure injection system HIT-RE 500-SD Anchor rod (stainless metric) Hilti HIT-Z-R
Technical data Approvals Key applications & advantages Technical data
Base material Dry, Submerged, Water- ETA ETA 09/0295 for HIT-RE 500-SD ■ Fastenings in cracked and uncracked Anchor type Off-the-shelf rods
filled, Wet injection mortar for rebar (ETAG concrete made with Hilti HIT HY200
condition
001-05, Option 1) Head configuration Externally threaded
Environmental Covered by ground soil, ■ For applications where shallow embed-
ETA, Seismic ETA 07/0260 HIT-RE 500-SD
conditions Highly corrosive special ment is needed Environmental Covered by ground soil,
injection mortar for anchoring Outdoor, Underwater,
applications, Indoor,
applications (ETAG 001-05, ■ Very high loads in cracked concrete conditions
damp conditions, fresh water
Option 1) ■ Very productive solution that saves
Indoor, dry conditions, Type of fastening Pre-fastening,
Indoor, ventilated Approvals and test reports may apply to selected cleaning time Through-fastening
Key applications & advantages facades, Outdoor, products only. Please refer to the documents for
■ Structural connections with post-in- details. Approvals / test ETA
Underwater, fresh water,
stalled rebar (e.g. extension/connection Underwater, salty water reports
to walls, slabs, stairs, columns, founda- Type of fastening Pre-fastening, Material Steel, A4 (SS316)
tions, etc.) Through-fastening composition
■ Anchoring structural steel connections Cleaning Compressed-air Installation All
(e.g. steel columns, beams, etc.) procedures cleaning direction
■ Anchoring secondary steel structures Material Epoxy adhesive Tested/approved Yes
(e.g. balustrades, steel ledgers, etc) composition for diamond drilling
■ Suitable for use in cracked and un- Installation All PROFIS Yes
cracked concrete with all anchoring direction Material, corrosion Steel, stainless
elements
■ Seismic approval allows use for seismic Ordering designation Anchor Baseplate Base plate Required Wrench Anchor Useable Package contents Sales Item
applications size clearance hole clearance hole tightening size length thread pack number
pre-fastening through-fastening torque length quantity
HIT-Z-R M8x80 M8 9 mm 11 mm 10 Nm 13 mm 80 mm 8 mm 1x Anchor rod HIT-Z-R M8x80 assy 40 pc 2018422
Ordering designation Shelf life from date Content Anchoring elements Number Package contents Sales pack Item HIT-Z-R M10x95 M10 12 mm 14 mm 25 Nm 17 mm 95 mm 22 mm 1x Anchor rod HIT-Z-R M10x95 40 pc 2018425
of manufacture (at per can/ of mixers quantity number assy
23°C and 50% relative cartridge included HIT-Z-R M10x160 M10 12 mm 14 mm 25 Nm 17 mm 160 mm 87 mm 1x Anchor rod HIT-Z-R M10x160 40 pc 2018428
humidity)
assy
HIT-RE 500-SD/500/1 9 months 0.5 l HAS threaded rods, HIS-N internally-threaded 1 1x Foil pack, 1x Mixer, 1 pc 387093
HIT-Z-R M12x105 M12 14 mm 16 mm 40 Nm 19 mm 105 mm 29 mm 1x Anchor rod HIT-Z-R M12x105 20 pc 2018429
inserts, HIT-V threaded rods, Rebar 1x Mixer extension
assy
HIT-RE 500-SD/330/1 12 months 0.33 l HAS threaded rods, HIS-N internally-threaded 1 1x Foil pack, 1x Mixer, 1 pc 387092
HIT-Z-R M12x155 M12 14 mm 16 mm 40 Nm 19 mm 155 mm 79 mm 1x Anchor rod HIT-Z-R M12x155 20 pc 2018431
inserts, HIT-V threaded rods, Rebar 1x Mixer extension
assy
HIT-Z-R M16x155 M16 18 mm 20 mm 80 Nm 24 mm 155 mm 38 mm 1x Anchor rod HIT-Z-R M16x155 12 pc 2018434
Injectable mortar Hilti HIT-RE 500 assy
Approvals HIT-Z-R M16x240 M16 18 mm 20 mm 80 Nm 24 mm 240 mm 123 mm 1x Anchor rod HIT-Z-R M16x240 12 pc 2018437
Technical data assy
Base material Dry, Submerged, Water- ETA ETA 04/0027 for HIT-RE 500
injection mortar for anchoring HIT-Z-R M20x215 M20 22 mm 24 mm 150 Nm 30 mm 215 mm 91 mm 1x Anchor rod HIT-Z-R M20x215 6 pc 2018438
condition filled, Wet assy
applications (ETAG 001-05,
Environmental Highly corrosive special Option 7)
conditions applications, Indoor,
Approvals and test reports may apply to selected
damp conditions,
products only. Please refer to the documents for
Indoor, dry conditions,
details.
Indoor, ventilated
facades, Outdoor, Un-
Key applications & advantages derwater, fresh water
■ Structural connections with post-in-
stalled rebar (e.g. extension/connection
Type of fastening Pre-fastening,
Through-fastening
9
to walls, slabs, stairs, columns, founda- Cleaning Compressed-air clean-
tions, etc.) procedures ing, Manual cleaning
■ Anchoring structural steel connections Material Epoxy adhesive
(e.g. steel columns, beams, etc.) composition
■ Anchoring secondary steel structures Installation All
(e.g. balustrades, steel ledgers, etc.) direction
■ High performance and technical superi-
ority as per international approvals
■ Especially suitable for large-diameter
elements and/or deep embedment
depths
Ordering designation Shelf life from date of Content Package contents Sales Item
manufacture (at 23°C and per can/ pack number
50% relative humidity) cartridge quantity
COMBO 40 x RE500 500 + HDM500 9 months 0.5 l 1x Dispenser HDM 500 assy, 40x Foil pack, 40x Mixer, 40x Mixer extension, 1 pc 3505556
Dispenser 1x Cassette 500ml black
COMBO 160 x RE500 500 + 9 months 0.5 l 1x Dispenser HDM 500 assy, 160x Foil pack, 160x Mixer, 160x Mixer exten- 1 pc 3505557
HDM500 Dispenser sion, 1x Round brush 13MM HG, 1x Round brush 18MM HG, 1x Round
brush 28MM HG, 1x Cassette 500ml black, 1x Blow-out pump, 1x Case
COMBO 50x RE500 330 + HDM500 12 months 0.33 l 1x Dispenser HDM 500 assy, 50x Foil pack, 50x Mixer, 50x Mixer extension, 1 pc 3512643
Dispenser 1x Cassette 500ml black
COMBO 200x RE500 330 + 12 months 0.33 l 1x Dispenser HDM 500 assy, 200x Foil pack, 200x Mixer, 200x Mixer exten- 1 pc 3514096
HDM500 Dispenser sion, 1x Round brush 13MM HG, 1x Round brush 18MM HG, 1x Round
brush 28MM HG, 1x Cassette 500ml black, 1x Blow-out pump, 1x Case
Combo RE 500 & PD 5 9 months 0.5 l 1 pc 3498454
Combo PD 5 & x160 RE 500/500ml 9 months 0.5 l 1 pc 3498455
HIT-RE 500/500/1 INT 9 months 0.5 l 1x Foil pack, 1x Mixer, 1x Mixer extension 1 pc 426672
HIT-RE 500/1400/1 INT 9 months 1.4 l 1x Foil pack, 1x Mixer, 1x Mixer extension 4 pc 426670
HIT-RE 500/330/1 INT 12 months 0.33 l 1x Foil pack, 1x Mixer, 1x Mixer extension 1 pc 426675
200 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 201
Anchor Systems Anchor Systems
Ordering designation Shelf life from Content Package contents Sales Item
Ordering Anchor Base plate Baseplate Base plate clearance Required Wrench Anchor Package contents Sales Item
date of manu- per can/ pack number
designation size clearance clearance hole hole through-fastening tightening size length pack number
facture (at 23°C cartridge quantity
hole pre-fastening torque quantity
and 50% relative
HIT-Z M8x80 M8 9 mm 9 mm 11 mm 10 Nm 13 mm 80 mm 1x Anchor rod HIT-Z 40 pc 2018364 humidity)
M8x80 assy COMBO 20x HY200 330ml + 12 months 0.33 l 1x Dispenser HDM 500 assy, 20x Foil pack, 40x Mixer, 20x Mixer extension, 1x Cassette 1 pc 3512429
HIT-Z M10x95 M10 12 mm 12 mm 14 mm 25 Nm 17 mm 95 mm 1x Anchor rod HIT-Z 40 pc 2018367 HDM500 Dispenser 500ml red
M10x95 assy Combo 80x HY200 330ml + 12 months 0.33 l 1x Dispenser HDM 500 assy, 80x Foil pack, 160x Mixer, 80x Mixer extension, 1x Cassette 1 pc 3512430
HIT-Z M12x105 M12 14 mm 14 mm 16 mm 40 Nm 19 mm 105 mm 1x Anchor rod HIT-Z 20 pc 2018411 HDM500 Dispenser 500ml red
M12x105 assy Combo 5x HY200 330ml + 12 months 0.33 l 1x Dispenser HDM 500 assy, 5x Foil pack, 10x Mixer, 5x Mixer extension, 1x Cassette 1 pc 3512486
HIT-Z M12x196 M12 14 mm 14 mm 16 mm 40 Nm 19 mm 196 mm 1x Anchor rod HIT-Z 20 pc 2018415 HDM500 Dispenser 500ml red
M12x196 assy COMBO 5x HY200 500ml + 12 months 0.5 l 1x Dispenser HDM 500 assy, 5x Foil pack, 10x Mixer, 5x Mixer extension, 1x Cassette 1 pc 3504824
HIT-Z M16x155 M16 18 mm 18 mm 20 mm 80 Nm 24 mm 155 mm 1x Anchor rod HIT-Z 12 pc 2018416 HDM500 Dispenser 500ml black, 1x Cassette 500ml red
M16x155 assy COMBO 20x HY200 500ml + 12 months 0.5 l 1x Dispenser HDM 500 assy, 20x Foil pack, 40x Mixer, 20x Mixer extension, 1x Cassette 1 pc 3504825
HIT-Z M16x205 M16 18 mm 18 mm 20 mm 80 Nm 24 mm 205 mm 1x Anchor rod HIT-Z 12 pc 2018418 HDM500 Dispenser 500ml black, 1x Cassette 500ml red
M16x205 assy C 20x HY200 500ml + HDM500 12 months 0.5 l 1x Dispenser HDM 500 assy, 20x Foil pack, 40x Mixer, 20x Mixer extension, 40x Anchor rod 1 pc 3504826
HIT-Z M20x215 M20 22 mm 22 mm 24 mm 150 Nm 30 mm 215 mm 1x Anchor rod HIT-Z 6 pc 2018420 + HIT-Z M8x80 HIT-Z M8x80 assy, 1x Cassette 500ml black, 1x Cassette 500ml red
C 20xHY200 500ml + HDM500 12 months 0.5 l 1x Dispenser HDM 500 assy, 20x Foil pack, 40x Mixer, 20x Mixer extension, 12x Anchor rod 1 pc 3504829
+ HIT-ZM16x155 HIT-Z M16x155 assy, 1x Cassette 500ml black, 1x Cassette 500ml red
C 20xHY200 500ml + HDM500 12 months 0.5 l 1x Dispenser HDM 500 assy, 20x Foil pack, 40x Mixer, 20x Mixer extension, 6x Anchor rod 1 pc 3504830
+ HIT-ZM20x215 HIT-Z M20x215 assy, 1x Cassette 500ml black, 1x Cassette 500ml red
Combo 40 x HY200 500ml 12 months 0.5 l 40x Foil pack, 80x Mixer, 40x Mixer extension 1 pc 3504831
COMBO 80x HY200 500ml + 12 months 0.5 l 1x Dispenser HDM 500 assy, 80x Foil pack, 160x Mixer, 80x Mixer extension, 1x Cassette 1 pc 3504832
HDM500 Dispenser 500ml black, 1x Cassette 500ml red
C 20xHY200 500ml + HDM500 12 months 0.5 l 1x Dispenser HDM 500 assy, 20x Foil pack, 40x Mixer, 20x Mixer extension, 1x Hammer drill 1 pc 3504843
+ 1xTE-YD18/59 bit TE-YD 18/59, 1x Cassette 500ml black, 1x Cassette 500ml red
C 20xHY200 500ml + HDM500 12 months 0.5 l 1x Dispenser HDM 500 assy, 20x Foil pack, 40x Mixer, 20x Mixer extension, 1x Hammer drill 1 pc 3504844
+ 1xTE-YD20/59 bit TE-YD 20/59, 1x Cassette 500ml black, 1x Cassette 500ml red
C 20xHY200 500ml + HDM500 12 months 0.5 l 1x Dispenser HDM 500 assy, 20x Foil pack, 40x Mixer, 20x Mixer extension, 1x Hammer drill 1 pc 3504845
+ 1xTE-YD25/59 bit TE-YD 25/59, 1x Cassette 500ml black, 1x Cassette 500ml red
S&M Premium Cordless Kit 12 months 0.5 l 1x Dispenser HDE 500-A22 EU assy, 1x Cassette 500ml black, 1x Cassette 500ml red, 1x 1 pc 3521887
Case, 1x Cordless combihammer TE 30-A36, 1x Case, 1x Battery pack B 36/6.0 Li-Ion assy,
1x Battery pack B 22/1.6 Li-Ion, 1x Battery charger C 4/36-350 230V, 20x Foil pack, 20x
Mixer, 20x Mixer extension, 1x Hammer drill bit TE-CX 16/22, 1x Hammer drill bit TE-CX
18/22, 1x Cassette 500ml red
Combo 40 x HY 200 330ml 12 months 0.33 l 1 pc 3500240
HIT-HY 200-A 330/2 12 months 0.33 l 1x Foil pack, 2x Mixer, 1x Mixer extension 1 pc 2022696
HIT-HY 200-A 500/2 12 months 0.5 l 1x Foil pack, 2x Mixer, 1x Mixer extension 1 pc 2022697
HIT-HY 200-A 500/1/P 12 months 0.5 l 1x Foil pack, 1x Mixer, 1x Mixer extension 20 pc 2047405
202 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 203
Anchor Systems Anchor Systems
Ordering Connection Diameter Length Working Base material Tool type Working mode Sales pack Item
designation end length quantity number
TE-CD 12/33 TE-C 12 mm 330 mm 200 mm Reinforced concrete, Concrete All tools with TE-C (SDS- Hammer drilling 1 pc 2018940
plus) chuck
Dispenser HDE 500-A22
TE-CD 14/37 TE-C 14 mm 370 mm 240 mm Reinforced concrete, Concrete All tools with TE-C (SDS- Hammer drilling 1 pc 2018942
plus) chuck
TE-CD 16/37 TE-C 16 mm 370 mm 240 mm Reinforced concrete, Concrete All tools with TE-C (SDS- Hammer drilling 1 pc 2018945
plus) chuck
TE-CD 18/37 TE-C 18 mm 370 mm 240 mm Reinforced concrete, Concrete All tools with TE-C (SDS- Hammer drilling 1 pc 2018946
plus) chuck
Length 590 mm
Ordering Connection Diameter Length Working Base material Tool type Working mode Sales pack Item
designation end length quantity number
TE-YD 18/59 TE-Y 18 mm 590 mm 400 mm Reinforced concrete, Concrete All tools with TE-Y (SDS- Hammer drilling 1 pc 2018957
max) connection
TE-YD 20/59 TE-Y 20 mm 590 mm 400 mm Reinforced concrete, Concrete All tools with TE-Y (SDS- Hammer drilling 1 pc 2018959
max) connection
TE-YD 25/59 TE-Y 25 mm 590 mm 400 mm Reinforced concrete, Concrete All tools with TE-Y (SDS- Hammer drilling 1 pc 2018962
max) connection
204 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 205
Anchor Systems Anchor Systems
9
HG, 1x Round brush 28MM HG, 1x Cassette Environmental Indoor, damp condi- 001-05, Option 7)
500ml black, 1x Blow-out pump, 1x Case conditions tions, Indoor, dry condi-
Approvals and test reports may apply to selected
tions, Indoor, ventilated
HIT-MM PLUS 330/2 12 months 0.33 l HIT-SC or HIT-IC Yes 2 1x Foil pack, 2x Mixer, 1x Mixer extension 1 pc 2031079 products only. Please refer to the documents for
facades, Outdoor
HIT-MM PLUS 500/2 12 months 0.5 l HIT-SC or HIT-IC Yes 2 1x Foil pack, 2x Mixer, 1x Mixer extension 1 pc 2031400 details.
Type of fastening Pre-fastening
Key applications & advantages Cleaning Compressed-air clean-
■ Applications in hollow and solid procedures ing, Manual cleaning
masonry Material Hybrid urethane meth-
■ Suitable for glass structures composition acrylate adhesive
■ For heavy bracing on insulated materi- Installation All
als in applications such as the installa- direction
tion of sun shades
■ Provides strong, reliable and easy-to-
install fastenings in a variety of masonry
materials
■ For use in indoor and outdoor applica-
tions in dry or wet drilled holes
Ordering designation Shelf life from date of manufac- Content per can/cartridge Compatibility sleeves Mixer Number Package Sales pack Item
ture (at 23°C and 50% relative extension of mixers contents quantity number
humidity) included included
HIT-HY 70 330/2 12 months 0.33 l Hilti HIT-SC, Hilti HIT-S Yes 2 1x Foil 1 pc 383677
pack, 2x
Mixer, 1x Mixer
extension
206 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 207
Anchor Systems Anchor Systems
Ordering Anchor Base plate Wrench/ Wrench Anchor Standard em- Max. fixture thickness Package contents Sales pack Item
designation size clearance hole nut size size length bedment depth at standard embed- quantity number
ment depth
HAS-E-5.8 M8 10 mm 13 mm 13 mm 110 mm 80 mm 14 mm 1x Anchor rod HAS-E 20 pc 332219
Ordering designation Weight Package contents Sales pack Item number M8x80/14 M8X80/14 assy
quantity HAS-E-5.8 M10 12 mm 17 mm 130 mm 90 mm 21 mm 1x Anchor rod HAS-E 20 pc 332220
P 8000 D 6.2 kg 1x Dispenser P 8000 D assy, 1x Cassette VIC printed, 1x Carrying device P 8000 D 1 pc 373959 M10x90/21 M10X90/21 assy
HAS-E-5.8 M12 14 mm 19 mm 260 mm 110 mm 128 mm 1x Anchor rod HAS-E 10 pc 333103
M12x110/128 M12X110/128 assy
HAS-E-5.8 M12 14 mm 19 mm 300 mm 110 mm 168 mm 1x Anchor rod HAS-E 10 pc 333104
M12x110/168 M12X110/168 assy
HAS-E-5.8 M12 14 mm 19 mm 160 mm 110 mm 28 mm 1x Anchor rod HAS-E 20 pc 332221
M12x110/28 M12X110/ 28 assy
HAS-E-5.8 M16 18 mm 24 mm 190 mm 125 mm 38 mm 1x Anchor rod HAS-E 20 pc 332222
M16x125/38 M16X125/ 38 assy
HAS-E-5.8 M20 22 mm 30 mm 240 mm 170 mm 48 mm 1x Anchor rod HAS-E 10 pc 332223
M20x170/48 M20X170/ 48 assy
HAS-E-5.8 M20 22 mm 30 mm 260 mm 170 mm 68 mm 1x Anchor rod HAS-E 10 pc 333110
M20x170/68 M20X170/ 68 assy
HAS-E-5.8 M20 22 mm 30 mm 300 mm 170 mm 108 mm 1x Anchor rod HAS-E 10 pc 333111
M20x170/108 M20X170/108 assy
HAS-E-5.8 M24 26 mm 36 mm 290 mm 210 mm 54 mm 1x Anchor rod HAS-E 10 pc 332224
M24x210/54 M24X210/ 54 assy
9
Anchor rod HAS-E-F
Key applications & advantages Technical data
■ Incorporates a chisel-shaped end to cut Anchor type Off-the-shelf rods
and mix the Hilti HVU capsule, embed-
ment marking for easy setting, and a Head configuration Externally threaded
conical head Environmental Indoor, damp condi-
■ Large family of anchor rods (M8-M39) conditions tions, Outdoor
Type of fastening Pre-fastening
Ordering designation Anchor Base plate Wrench Anchor Standard embedment Max. fixture thickness at Drilling depth Sales pack Item
size clearance hole size length depth standard embedment depth quantity number
HAS-E-F-5.8 M10x90/21 M10 12 mm 17 mm 130 mm 90 mm 21 mm 90 mm 20 pc 333145
HAS-E-F-5.8 M12x110/28 M12 14 mm 19 mm 160 mm 110 mm 28 mm 110 mm 20 pc 333148
HAS-E-F-5.8 M16x125/38 M16 18 mm 24 mm 190 mm 125 mm 38 mm 125 mm 20 pc 333153
HAS-E-F-5.8 M20x170/48 M20 22 mm 30 mm 240 mm 170 mm 170 mm 10 pc 333158
HAS-E-F-5.8 M24x210/54 M24 26 mm 36 mm 290 mm 210 mm 210 mm 10 pc 333163
208 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 209
Anchor Systems Anchor Systems
Ordering designation Anchor Base plate Wrench Anchor Standard Max. fixture Drilling depth Package contents Sales Item
size clearance size length embedment thickness pack number
hole depth at standard quantity
embedment
depth
HAS-E-R M8x80/14 M8 9 mm 13 mm 110 mm 80 mm 14 mm 80 mm 1x Anchor rod HAS-E-R M8X80/ 20 pc 333119
14 Anchor rod HAS-TZ
HAS-E-R M10x90/21 M10 12 mm 17 mm 130 mm 90 mm 21 mm 90 mm 1x Anchor rod HAS-E-R 20 pc 333122
M10X90/21
HAS-E-R M12x110/28 M12 14 mm 19 mm 160 mm 110 mm 28 mm 110 mm 1x Anchor rod HAS-E-R 20 pc 333126 Ordering designation Anchor Base plate Required Wrench Anchor Standard Max. fixture Package contents Sales pack Item number
M12X110/ 28 size clearance hole tightening size length embed- thickness quantity
torque ment at standard
HAS-E-R M12x110/88 M12 14 mm 19 mm 220 mm 110 mm 88 mm 110 mm 1x Anchor rod HAS-E-R 10 pc 333127
depth embedment
M12X110/ 88 depth
HAS-E-R M16x125/38 M16 18 mm 24 mm 190 mm 125 mm 38 mm 125 mm 1x Anchor rod HAS-E-R 20 pc 333131 HAS-TZ M10X75/50 M10 12 mm 20 Nm 17 mm 159 mm 75 mm 50 mm 1x Anchor rod HAS- 10 pc 308384
M16X125/ 38 TZ M10x75/50
HAS-E-R M16x125/108 M16 18 mm 24 mm 260 mm 125 mm 108 mm 125 mm 1x Anchor rod HAS-E-R 10 pc 333132 HAS-TZ M16X125/100 M16 18 mm 80 Nm 24 mm 271 mm 125 mm 100 mm 1x Anchor rod HAS- 5 pc 332521
M16X125/108 TZ M16x125/100
HAS-E-R M20x170/48 M20 22 mm 30 mm 240 mm 170 mm 48 mm 170 mm 1x Anchor rod HAS-E-R 10 pc 333135
M20X170/ 48
HAS-E-R M20x170/108 M20 22 mm 30 mm 300 mm 170 mm 108 mm 170 mm 1x Anchor rod HAS-E-R 10 pc 333136
M20X170/108
HAS-E-R M24x210/54 M24 26 mm 36 mm 290 mm 210 mm 54 mm 210 mm 1x Anchor rod HAS-E-R 10 pc 333137
M24X210/ 54
210 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 211
Anchor Systems Anchor Systems
Ordering designation Anchor size Base plate Required Wrench Anchor Useable Drilling Package contents Sales pack Item
clearance tight- size length thread length depth quantity number
hole ening
torque
HIT-V-R M8x80 M8 9 mm 10 Nm 13 mm 80 mm 65 mm 60 mm 1x Anchor rod HIT-V-R M8x80 assy 20 pc 387074
HIT-V-R M10x130 M10 12 mm 20 Nm 17 mm 130 mm 113 mm 90 mm 1x Anchor rod HIT-V-R M10x130 assy 10 pc 387078
HIT-V-R M12x150 M12 14 mm 40 Nm 19 mm 150 mm 131 mm 110 mm 1x Anchor rod HIT-V-R M12x150 assy 10 pc 387081
HIT-V-R M16x150 M16 18 mm 80 Nm 24 mm 150 mm 127 mm 125 mm 1x Anchor rod HIT-V-R M16x150 assy 5 pc 387084
HIT-V-R M16x200 M16 18 mm 80 Nm 24 mm 200 mm 177 mm 125 mm 1x Anchor rod HIT-V-R M16x200 assy 5 pc 387085
HIT-V-R M20x260 M20 22 mm 150 Nm 30 mm 260 mm 233 mm 170 mm 1x Anchor rod HIT-V-R M20x260 assy 5 pc 387088
HIT-V-R M24x300 M24 26 mm 200 Nm 36 mm 300 mm 268 mm 210 mm 1x Anchor rod HIT-V-R M24x300 assy 5 pc 387152
212 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 213
Anchor Systems Anchor Systems
Ordering designation Anchor Baseplate Base plate Required Wrench Anchor Useable Package contents Sales pack Item
size clearance hole clearance tightening size length thread quantity number
pre-fastening hole through- torque length
fastening
HIT-Z-R M8x80 M8 9 mm 11 mm 10 Nm 13 mm 80 mm 8 mm 1x Anchor rod HIT-Z-R M8x80 assy 40 pc 2018422
Anchor rod (carbon steel) HIT-Z HIT-Z-R M10x95 M10 12 mm 14 mm 25 Nm 17 mm 95 mm 22 mm 1x Anchor rod HIT-Z-R M10x95 40 pc 2018425
assy
HIT-Z-R M10x160 M10 12 mm 14 mm 25 Nm 17 mm 160 mm 87 mm 1x Anchor rod HIT-Z-R M10x160 40 pc 2018428
assy
Ordering Anchor Base plate Baseplate Base plate Required Wrench Anchor Package contents Sales pack Item
designation size clearance clear- clearance tightening size length quantity number HIT-Z-R M12x105 M12 14 mm 16 mm 40 Nm 19 mm 105 mm 29 mm 1x Anchor rod HIT-Z-R M12x105 20 pc 2018429
hole ance hole hole through- torque assy
pre-fastening fastening
HIT-Z-R M12x155 M12 14 mm 16 mm 40 Nm 19 mm 155 mm 79 mm 1x Anchor rod HIT-Z-R M12x155 20 pc 2018431
HIT-Z M8x80 M8 9 mm 9 mm 11 mm 10 Nm 13 mm 80 mm 1x Anchor rod HIT-Z M8x80 assy 40 pc 2018364 assy
HIT-Z M10x95 M10 12 mm 12 mm 14 mm 25 Nm 17 mm 95 mm 1x Anchor rod HIT-Z M10x95 assy 40 pc 2018367 HIT-Z-R M16x155 M16 18 mm 20 mm 80 Nm 24 mm 155 mm 38 mm 1x Anchor rod HIT-Z-R M16x155 12 pc 2018434
HIT-Z M12x105 M12 14 mm 14 mm 16 mm 40 Nm 19 mm 105 1x Anchor rod HIT-Z M12x105 assy 20 pc 2018411 assy
mm HIT-Z-R M16x240 M16 18 mm 20 mm 80 Nm 24 mm 240 mm 123 mm 1x Anchor rod HIT-Z-R M16x240 12 pc 2018437
HIT-Z M12x196 M12 14 mm 14 mm 16 mm 40 Nm 19 mm 196 1x Anchor rod HIT-Z M12x196 assy 20 pc 2018415 assy
mm HIT-Z-R M20x215 M20 22 mm 24 mm 150 Nm 30 mm 215 mm 91 mm 1x Anchor rod HIT-Z-R M20x215 6 pc 2018438
HIT-Z M16x155 M16 18 mm 18 mm 20 mm 80 Nm 24 mm 155 1x Anchor rod HIT-Z M16x155 assy 12 pc 2018416 assy
mm
HIT-Z M16x205 M16 18 mm 18 mm 20 mm 80 Nm 24 mm 205 1x Anchor rod HIT-Z M16x205 assy 12 pc 2018418
mm
HIT-Z M20x215 M20 22 mm 22 mm 24 mm 150 Nm 30 mm 215 1x Anchor rod HIT-Z M20x215 assy 6 pc 2018420
mm
HIT-Z M20x250 M20 22 mm 22 mm 24 mm 150 Nm 30 mm 250
mm
1x Anchor rod HIT-Z M20x250 assy 6 pc 2018421
9
214 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 215
Anchor Systems Anchor Systems
■
and easy removal of bolts
Chisel-shaped end to cut and mix the
Head configuration Inner thread
cavities for good mortar distribution and
thus good load transfer
Material
composition
Steel, zinc-plated 9
Hilti HVU capsule (to be installed with Environmental Covered by ground soil, ■ In meter lengths, for cutting to size on
Installation All
HIS-S setting tool) conditions Outdoor, Underwater, site
direction
fresh water
LEED information No
Type of fastening Pre-fastening
available
Material Steel, A4 (SS316) Material, corrosion Steel, zinc-plated
composition
Installation All Ordering designation Anchor size Anchor length Sales pack Item number
direction quantity
Ordering designation Anchor Internal Thread engagement Thread engagement Base plate Outside Anchor Package contents Sales pack Item
size thread size depth - max. depth - min. clearance diameter length quantity number
hole
HIS-RN M8x90 A4 M8 8 mm 20 mm 8 mm 9 mm 13 mm 90 mm 1x Cap HIS M8 10 pc 258024
HIS-RN M10x110 A4 M10 10 mm 25 mm 10 mm 12 mm 17 mm 110 mm 1x Cap HIS M10 10 pc 258025
HIS-RN M12x125 A4 M12 12 mm 30 mm 12 mm 14 mm 21 mm 125 mm 1x Cap HIS M12 5 pc 258026
HIS-RN M16x170 A4 M16 16 mm 40 mm 16 mm 18 mm 25 mm 170 mm 1x Cap HIS M16 5 pc 258027
HIS-RN M20x205 A4 M20 20 mm 50 mm 20 mm 22 mm 28 mm 205 mm 1x Cap HIS M20 5 pc 258028
216 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 217
Anchor Systems Anchor Systems
218 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 219
Anchor Systems Anchor Systems
Ordering Gauge Gauge Maxi- Effective Maximum Weight Package contents Sales Item
Ordering designation Weight Package contents Sales pack Item number designation accuracy mum span of tensile incl. pack number
quantity test load- stroke bridge quantity
load spreading assy.
P 8000 D 6.2 kg 1x Dispenser P 8000 D assy, 1x Cassette VIC printed, 1x Carrying device P 8000 D 1 pc 373959
bridge
HAT 28 M kit Strain ± 2.5% 25 kN 118 mm 50 mm 4 kg 1x Tensile tester HAT 28 assy, 1x Manometer 0-5kN C HAT 28 1 pc 355338
gauge assy, 1x Manometer 0-25kN C HAT28 assy, 1x Load spreading
Mixers and extensions Hilti HIT 0-5 bridge 150 assy, 1x Set of screws M6, M8, M10, M12, M16, 1x
kN/0- Allen wrench 2.5,3 set, 1x Adjustable end wrench 0-29 assy, 1x
Key applications & advantages Technical data 25 kN Adapter 4.5, 5.5, 6.5, 8.5, 10.5, 12.5, 1x Adapter 1/4”, 5/16”,
■ Mixing nozzles for Hilti HIT adhesive with 3/8”, 1/2” set, 1x Adapter M4, M5, M6, M8, M10, M12 set, 1x
Dispenser, setting Mixing nozzles and
max. Adapter scaffold ringbolt, 1x Adapter M5, 1x Adapter M6, 1x
cartridges tool, accessory, injection accessories
load Adapter M8, 1x Adapter M10, 1x Adapter M12, 1x Adapter M16,
tester type indica- 1x Adapter M20, 1x Adapter X-IE, 1x Threaded brace foot 50
tor set, 1x Threaded brace foot HAT 28 100 set, 1x Pivot foot set,
Ordering designation Package contents Sales pack Item number 1x Case
quantity
Mixer HIT-RE-M 1 pc 337111
Mixer HFX-M 1x Mixer 10 pc 284267 Technical data
Mixer HIT-M1 assy 1x Mixer 100 pc 68156
Dispenser, setting Anchor testers and
tool, accessory, accessories
tester type
Battery type 1x9V
9
Power source type 9 V battery
Ordering designation Gauge Gauge accuracy Maximum Max. Weight Package contents Sales pack Item
test load allowable quantity number
load
DPG 100 Digital display Typical accuracy of ± 0.3 kN 100 kN 100 kN 3 kg 1x Coupling M6, 1x Coupling M8, 1x Cou- 1 pc 59999
pling M10, 1x Coupling M12, 1x Coupling
M16, 1x Coupling M20, 1x Coupling M24,
3x Threaded rod M6X35, 3x Threaded
rod M8X35, 3x Threaded rod M10X45, 1x
Threaded rod M12X120, 1x Threaded rod
M 16X160, 1x Threaded rod M20X190, 1x
Threaded rod M24X240, 1x Anchor tester
DPG 100, 1x Case
220 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 221
Anchor Systems Anchor Systems
Ordering designation Connection end Package contents Sales pack Item number
quantity
TE-Y-HDA-ST 37-M20 TE-Y 1x Setting tool HDA M20 1 pc 339269
TE-Y-HDA ST 30-M16 TE-Y 1x Setting tool ST30-M16/Y 1 pc 331846
Carbon steel through-set undercut anchor HDA-T Ordering designation Connection end Sales pack Item number
quantity
Key applications & advantages
■ Safety-relevant, heavy-duty fastenings
Technical data
Head configuration Externally threaded
TE-C-HDA-B 20x100
TE-C-HDA-B 20x120
TE-C
TE-C
1 pc
1 pc
332089
332090 9
for all dynamic loading (shock, seismic
and fatigue) in cracked or uncracked Environmental Indoor, dry conditions
Stop drill bit TE-Y-HDA-B
concrete, including applications in conditions
nuclear power plants Type of fastening Through-fastening Key applications & advantages Technical data
■ Fastenings to support heavy pipes, Material Bolt: steel, 8.8 grade, ■ Drilling HDA anchor holes to the defined Dispenser, setting Stop drill bits
safety barriers, industrial machines, composition zinc-plated (min. 5 µm) depth tool, accessory,
crane rails, dorm structures, crash barri- Installation All tester type
ers, roof fixings, elevator tracks, bridge direction
retrofitting etc.
IBC compliance IBC 2003, IBC 2006,
■ Combines the advantages of a post- IBC 2009, IBC 2012
installed mechanical anchor, i.e. flex- PROFIS Yes
ibility and immediate loading, with the
Ordering designation Connection end Sales pack Item number
performance of a cast-in-place headed LEED information Yes
quantity
stud available
TE-Y-HDA-B 30x190 TE-Y 1 pc 332097
■ Close spacing and small edge distance Additional product Meets approval require-
TE-Y-HDA-B 30x230 TE-Y 1 pc 332098
information ments when installed
thanks to low expansion forces TE-Y-HDA-B 37x300 TE-Y 1 pc 339271
using the specified stop
drill bit, setting tool and
rotary hammer
Material, corrosion Steel, zinc-plated
Ordering designation Anchor Base plate Required tight- Socket Wrench Washer Anchor length Package contents Sales pack Item
size clearance hole ening torque size size size quantity number
HDA-T M10x100/20 M10 21 mm 50 Nm 17 mm 17 mm 27 mm 150 mm 1x Undercut anchor HDA-T 12 pc 331545
M10/20 assy
HDA-T M12x125/30 M12 23 mm 80 Nm 19 mm 32 mm 190 mm 1x Undercut anchor HDA-T 8 pc 331548
M12/30 assy
HDA-T M16x190/40 M16 32 mm 120 Nm 24 mm 45 mm 275 mm 1x Undercut anchor HDA-T 4 pc 331552
M16/40 assy
222 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 223
Anchor Systems Anchor Systems
Ordering Anchor Anchor Base plate Required Wrench Max. fixture Drilling Package contents Sales Item
designation size length clearance tightening size thickness at depth pack number
hole torque standard em- quantity
bedment depth
HSL-3 M8/20 M8 98 mm 14 mm 25 Nm 13 mm 20 mm 80 mm 1x Heavy-duty anchor HSL-3 M 8/20 40 pc 371775
9
assy
HSL-3 M8/40 M8 118 mm 14 mm 25 Nm 13 mm 40 mm 80 mm 1x Heavy-duty anchor HSL-3 M 8/40 40 pc 371776
assy
HSL-3 M10/20 M10 110 mm 17 mm 50 Nm 17 mm 20 mm 90 mm 1x Heavy-duty anchor HSL-3 M 10/20 20 pc 371778
assy
HSL-3 M10/40 M10 130 mm 17 mm 50 Nm 17 mm 40 mm 90 mm 1x Heavy-duty anchor HSL-3 M 10/40 20 pc 371779
assy
HSL-3 M12/25 M12 131 mm 20 mm 80 Nm 19 mm 25 mm 105 mm 1x Heavy-duty anchor HSL-3 M 12/25 20 pc 371781
assy
HSL-3 M12/50 M12 156 mm 20 mm 80 Nm 19 mm 50 mm 105 mm 1x Heavy-duty anchor HSL-3 M 12/50 10 pc 371782
assy
HSL-3 M16/25 M16 153 mm 26 mm 120 Nm 24 mm 25 mm 125 mm 1x Heavy-duty anchor HSL-3 M 16/25 10 pc 371784
assy
HSL-3 M16/50 M16 178 mm 26 mm 120 Nm 24 mm 50 mm 125 mm 1x Heavy-duty anchor HSL-3 M 16/50 10 pc 371785
assy
HSL-3 M20/30 M20 183 mm 31 mm 200 Nm 30 mm 30 mm 155 mm 1x Heavy-duty anchor HSL-3 M 20/30 6 pc 371787
assy
HSL-3 M20/60 M20 213 mm 31 mm 200 Nm 30 mm 60 mm 155 mm 1x Heavy-duty anchor HSL-3 M 20/60 6 pc 371788
assy
224 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 225
Anchor Systems Anchor Systems
Ordering Anchor Anchor Base plate Required Socket Wrench Thread Package contents Sales Item
designation size length clearance tightening size size length pack number
Stud anchor HST hole torque quantity
HSA M6x65 M6 65 mm 7 mm 5 Nm 10 mm 10 mm 30 mm 1x Std stud anchor HSA M6 20/10/- assy 200 pc 2036085
20/10/-
HSA M6 x 85 M6 85 mm 7 mm 5 Nm 10 mm 10 mm 50 mm 1x Std stud anchor HSA M6 40/30/10 assy 100 pc 2036086
40/30/10
Ordering designation Anchor Anchor Base plate Required Wrench/ Socket Wrench Package contents Sales Item
size length clearance tightening nut size size size pack number HSA M8x55 M8 55 mm 9 mm 15 Nm 13 mm 13 mm 14 mm 1x Std stud anchor HSA M8 5/-/- assy 100 pc 2004122
hole torque quantity 5/-/-
HST M8X75/10 M8 75 mm 9 mm 20 Nm 13 mm 13 mm 13 mm 1x Safety stud anchor HST M8X75 assy 100 pc 371581 HSA M8x70 M8 70 mm 9 mm 15 Nm 13 mm 13 mm 29 mm 1x Std stud anchor HSA M8 20/10/- assy 100 pc 2004123
HST M8x95/30 M8 95 mm 9 mm 20 Nm 13 mm 13 mm 13 mm 1x Safety stud anchor HST M8X95 assy 80 pc 295378 20/10/-
HST M8X115/50 M8 115 mm 9 mm 20 Nm 13 mm 13 mm 13 mm 1x Safety stud anchor HST M8X115 assy 50 pc 371583 HSA M8x85 M8 85 mm 9 mm 15 Nm 13 mm 13 mm 44 mm 1x Std stud anchor HSA M8 35/25/- assy 80 pc 2004124
35/25/-
HST M10X90/10 M10 90 mm 12 mm 45 Nm 17 mm 17 mm 17 mm 1x Safety stud anchor HST M10X90 assy 50 pc 371584
HSA M8x130 M8 130 mm 9 mm 15 Nm 13 mm 13 mm 89 mm 1x Std stud anchor HSA M8 80/70/40 assy 50 pc 2004126
HST M10x110/30 M10 110 mm 12 mm 45 Nm 17 mm 17 mm 17 mm 1x Safety stud anchor HST M10X110 assy 40 pc 295367 80/70/40
HST M10X130/50 M10 130 mm 12 mm 45 Nm 17 mm 17 mm 17 mm 1x Safety stud anchor HST M10X130 assy 25 pc 371586 HSA M10x68 M10 68 mm 12 mm 25 Nm 17 mm 17 mm 16 mm 1x Std stud anchor HSA M10 5/-/- assy 50 pc 2004127
HST M10x160/80 M10 160 mm 12 mm 45 Nm 17 mm 17 mm 17 mm 1x Safety stud anchor HST M10x160 assy 25 pc 272727 5/-/-
HST M12X115/20 M12 115 mm 14 mm 60 Nm 19 mm 19 mm 19 mm 1x Safety stud anchor HST M12X115 assy 25 pc 371587 HSA M10x83 M10 83 mm 12 mm 25 Nm 17 mm 17 mm 31 mm 1x Std stud anchor HSA M10 20/10/- assy 50 pc 2004128
HST M12X145/50 M12 145 mm 14 mm 60 Nm 19 mm 19 mm 19 mm 1x Safety stud anchor HST M12X145 assy 25 pc 371588 20/10/-
HST M12X185/90 M12 185 mm 14 mm 60 Nm 19 mm 19 mm 19 mm 1x Safety stud anchor HST M12X185 assy 25 pc 371589 HSA M10x98
35/25/-
M10 98 mm 12 mm 25 Nm 17 mm 17 mm 46 mm 1x Std stud anchor HSA M10 35/25/- assy 40 pc 2004129 9
HST M12X235/140 M12 235 mm 14 mm 60 Nm 19 mm 19 mm 19 mm 1x Safety stud anchor HST M12X235 assy 25 pc 371591
HSA M10x168 M10 168 mm 12 mm 25 Nm 17 mm 17 mm 116 1x Std stud anchor HSA M10 105/95/65 assy 25 pc 2004153
HST M16X140/25 M16 140 mm 18 mm 110 Nm 24 mm 24 mm 24 mm 1x Safety stud anchor HST M16X140 assy 12 pc 371593
105/95/65 mm
HST M16X165/50 M16 165 mm 18 mm 110 Nm 24 mm 24 mm 24 mm 1x Safety stud anchor HST M16X165 assy 12 pc 371594
HSA M12x85 M12 85 mm 14 mm 50 Nm 19 mm 19 mm 18 mm 1x Std stud anchor HSA M12 5/-/- assy 25 pc 2004154
HST M16X215/100 M16 215 mm 18 mm 110 Nm 24 mm 24 mm 24 mm 1x Safety stud anchor HST M16X215 assy 12 pc 371595 5/-/-
HST M16X255/140 M16 255 mm 18 mm 110 Nm 24 mm 24 mm 24 mm 1x Safety stud anchor HST M16X255 assy 12 pc 371596 HSA M12x100 M12 100 mm 14 mm 50 Nm 19 mm 19 mm 33 mm 1x Std stud anchor HSA M12 20/5/- assy 25 pc 2004155
HST M20X170/30 M20 170 mm 22 mm 240 Nm 30 mm 30 mm 30 mm 1x Safety stud anchor HST M20X170 assy 5 pc 371598 20/5/-
HST M20X200/60 M20 200 mm 22 mm 240 Nm 30 mm 30 mm 30 mm 1x Safety stud anchor HST M20X200 assy 5 pc 371599 HSA M12x115 M12 115 mm 14 mm 50 Nm 19 mm 19 mm 48 mm 1x Std stud anchor HSA M12 35/20/- assy 25 pc 2004156
HST M24X200/30 M24 200 mm 26 mm 300 Nm 36 mm 36 mm 36 mm 1x Safety stud anchor HST M24X200 assy 5 pc 371601 35/20/-
HST M24X230/60 M24 230 mm 26 mm 300 Nm 36 mm 36 mm 36 mm 1x Safety stud anchor HST M24X230 assy 5 pc 371602 HSA M12x145 M12 145 mm 14 mm 50 Nm 19 mm 19 mm 78 mm 1x Std stud anchor HSA M12 65/50/15 assy 25 pc 2004157
65/50/15
HSA M12x175 M12 175 mm 14 mm 50 Nm 19 mm 19 mm 108 1x Std stud anchor HSA M12 95/80/45 assy 25 pc 2004158
95/80/45 mm
HSA M12x225 M12 225 mm 14 mm 50 Nm 19 mm 19 mm 158 1x Std stud anchor HSA M12 145/130/95 assy 25 pc 2004160
145/130/95 mm
HSA M16x102 M16 102 mm 18 mm 80 Nm 24 mm 24 mm 22 mm 1x Std stud anchor HSA M16 5/-/- assy 16 pc 2004161
5/-/-
HSA M16x117 M16 117 mm 18 mm 80 Nm 24 mm 24 mm 37 mm 1x Std stud anchor HSA M16 20/5/- assy 16 pc 2004162
20/5/-
HSA M16x137 M16 137 mm 18 mm 80 Nm 24 mm 24 mm 57 mm 1x Std stud anchor HSA M16 40/25/- assy 16 pc 2004163
40/25/-
HSA M16x182 M16 182 mm 18 mm 80 Nm 24 mm 24 mm 102 1x Std stud anchor HSA M16 85/70/30 assy 16 pc 2004164
85/70/30 mm
HSA M16x232 M16 232 mm 18 mm 80 Nm 24 mm 24 mm 152 1x Std stud anchor HSA M16 135/120/80 assy 16 pc 2004165
135/120/80 mm
HSA M20x125 M20 125 mm 22 mm 200 Nm 30 mm 30 mm 48 mm 1x Std stud anchor HSA M20 10/-/- assy 10 pc 2036088
10/-/-
HSA M20x170 M20 170 mm 22 mm 200 Nm 30 mm 30 mm 88 mm 1x Std stud anchor HSA M20 55/30/15 assy 10 pc 2036089
55/30/-
226 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 227
Anchor Systems Anchor Systems
Standard hot-dip galvanized stud anchor HSA-F Standard stud anchor HSA-R
Key applications & advantages Technical data Key applications & advantages Technical data
■ Fastening brackets and channels Head configuration Externally threaded ■ Fastening facade brackets Head configuration Externally threaded
■ Fastening columns and beams ■ Fastening columns and beams
Environmental Indoor, damp conditions Environmental Outdoor
■ Wide range of fastening applications in conditions conditions
concrete ■ Fastening brackets and channels
Type of fastening Pre-fastening, Type of fastening Pre-fastening,
■ Fast, convenient and reliable torquing Through-fastening ■ High loads (optimal utilization of the Through-fastening
using SIW 14-A or 22-A impact wrench Material Steel, hot-dip galva- concrete strength) Material Steel, A4 (SS316)
with S-TB composition nized (min. 35 µm) composition
■ 3 embedment depths offering maximum
■ Suitable for presetting and through- Installation All flexibility Installation All
fastening in uncracked concrete direction direction
Tested/approved Yes Tested/approved Yes
for diamond drilling for diamond drilling
LEED information Yes PROFIS Yes
available
LEED information Yes
Material, corrosion Steel, sherardised / hot-
available
dip galvanised
Material, corrosion Steel, stainless
Accessories HSV/ HSA/ HST/ KB3/
KB-TZ Accessories HSV/ HSA/ HST/ KB3/
KB-TZ
Ordering designation Anchor Anchor Base plate Required Socket Thread Length Package contents Sales Item
size length clearance tightening size length identification pack number
hole torque mark quantity Ordering designation Anchor Anchor Base plate Required Socket Wrench Thread Package contents Sales Item
size length clearance tightening size size length pack number
HSA-F M8x70 20/10/- M8 70 mm 9 mm 15 Nm 13 mm 29 mm w 1x Std stud anchor HSA-F M8 100 pc 2004114 hole torque quantity
20/10/-
HSA-R M6x50 M6 50 mm 7 mm 5 Nm 10 mm 10 mm 15 mm 1x Std stud anchor HSA-R M6 5/-/- assy 200 pc 2036314
HSA-F M8x85 35/25/- M8 85 mm 9 mm 15 Nm 13 mm 44 mm t 1x Std stud anchor HSA-F M8 80 pc 2004115 5/-/-
35/25/-
HSA-R M8x55 M8 55 mm 9 mm 15 Nm 13 mm 13 mm 14 mm 1x Std stud anchor HSA-R M8 5/-/- assy 100 pc 2004197
HSA-F M10x68 5/-/- M10 68 mm 12 mm 25 Nm 17 mm 16 mm z 1x Std stud anchor HSA-F M10 50 pc 2004118 5/-/-
5/-/-
HSA-R M8x70 M8 70 mm 9 mm 15 Nm 13 mm 13 mm 29 mm 1x Std stud anchor HSA-R M8 20/10/- assy 100 pc 2004198
HSA-F M10x83 20/10/- M10 83 mm 12 mm 25 Nm 17 mm 31 mm w 1x Std stud anchor HSA-F M10 50 pc 2004119 20/10/-
20/10/-
HSA-R M8x85 M8 85 mm 9 mm 15 Nm 13 mm 13 mm 44 mm 1x Std stud anchor HSA-R M8 35/25/- assy 80 pc 2004199
HSA-F M10x98 35/25/- M10 98 mm 12 mm 25 Nm 17 mm 46 mm t 1x Std stud anchor HSA-F M10 40 pc 2004170 35/25/-
35/25/-
HSA-R M8x105 M8 105 mm 9 mm 15 Nm 13 mm 13 mm 89 mm 1x Std stud anchor HSA-R M8 55/45/15 assy 50 pc 2004200
HSA-F M12x100 20/5/- M12 100 mm 14 mm 50 Nm 19 mm 33 mm w 1x Std stud anchor HSA-F M12 25 pc 2004173 55/45/15
20/5/-
HSA-R M10x68 M10 68 mm 12 mm 25 Nm 17 mm 17 mm 16 mm 1x Std stud anchor HSA-R M10 5/-/- assy 50 pc 2004201
HSA-F M12x145 M12 145 mm 14 mm 50 Nm 19 mm 78 mm n 1x Std stud anchor HSA-F M12 25 pc 2004175 5/-/-
65/50/15 65/50/15
HSA-R M10x83 M10 83 mm 12 mm 25 Nm 17 mm 17 mm 31 mm 1x Std stud anchor HSA-R M10 20/10/- assy 50 pc 2004202
HSA-F M16x102 5/-/- M16 102 mm 18 mm 80 Nm 24 mm 22 mm z 1x Std stud anchor HSA-F M16 16 pc 2004177 20/10/-
5/-/-
HSA-R M10x113 M10 113 mm 12 mm 25 Nm 17 mm 17 mm 61 mm 1x Std stud anchor HSA-R M10 50/40/10 assy 40 pc 2004204
HSA-F M16x182 M16 182 mm 18 mm 80 Nm 24 mm 102 mm J 1x Std stud anchor HSA-F M16 16 pc 2004179 50/40/10
85/70/30 85/70/30
HSA-R M12x100 M12 100 mm 14 mm 50 Nm 19 mm 19 mm 33 mm 1x Std stud anchor HSA-R M12 20/5/- 25 pc 2004208
HSA-F M20x170 55/30/- M20 170 mm 22 mm 200 Nm 24 mm 88 mm p 1x Std stud anchor HSA-F M20 10 pc 2036313 20/5/-
55/30/15 assy
HSA-R M12x115 M12 115 mm 14 mm 50 Nm 19 mm 19 mm 48 mm 1x Std stud anchor HSA-R M12 35/20/- 25 pc 2004209
35/20/-
Standard stud anchor HSA-R2 HSA-R M16x102 M16 102 mm 18 mm 80 Nm 24 mm 24 mm 22 mm 1x Std stud anchor HSA-R M16 5/-/- assy 16 pc 2004214
9
5/-/-
Key applications & advantages Technical data HSA-R M16x137 M16 137 mm 18 mm 80 Nm 24 mm 24 mm 57 mm 1x Std stud anchor HSA-R M16 40/25/- assy 16 pc 2004216
■ Fastening facade brackets Head configuration Externally threaded 40/25/-
■ Fastening brackets and channels HSA-R M16x182 M16 182 mm 18 mm 80 Nm 24 mm 24 mm 102 mm 1x Std stud anchor HSA-R M16 85/70/30 assy 16 pc 2004217
Environmental Outdoor 85/70/30
■ Fastening columns and beams conditions HSA-R M20x125 M20 125 mm 22 mm 200 Nm 30 mm 30 mm 45 mm 1x Std stud anchor HSA-R M20 10/-/- assy 10 pc 2036317
■ High loads (optimal utilization of the Type of fastening Pre-fastening, 10/-/-
concrete strength) Through-fastening
■ 3 embedment depths offering maximum Material Steel, A2 (SS 304)
flexibility composition Torque bar S-TB
Installation All
direction
Tested/approved Yes
for diamond drilling Ordering Drive connection Drive head Material coating/ Material composition Tool type Base material Connection Sales pack Item
designation plating/finish end size quantity number
PROFIS Yes
S-TB HSA M8 1/2 in square, 1/2 in, square, Black Impact-grade chrome Impact tools, SIW Concrete 12.7 mm 1 pc 423774
LEED information Yes female male molybdenum steel (uncracked)
available S-TB HSA M10 1/2 in square, 1/2 in, square, Black Impact-grade chrome Impact tools, SIW Concrete 12.7 mm 1 pc 423775
Material, corrosion Steel, stainless female male molybdenum steel (uncracked)
S-TB HSA M12 1/2 in square, 1/2 in, square, Black Impact-grade chrome Impact tools, SIW Concrete 12.7 mm 1 pc 423776
Accessories HSV/ HSA/ HST/ KB3/
female male molybdenum steel (uncracked)
KB-TZ
S-TB HSA M16 1/2 in square, 1/2 in, square, Black Impact-grade chrome Impact tools, SIW Concrete 12.7 mm 1 pc 423777
Ordering designation An- Anchor Base plate Required tight- Socket Wrench Fastening Package contents Sales pack Item female male molybdenum steel (uncracked)
chor length clearance hole ening torque size size thickness at quantity number
size embed.1
HSA-R2 M8x70 M8 70 mm 9 mm 15 Nm 13 mm 13 mm 20 mm 1x Std stud anchor HSA-R2 100 pc 2004218
20/10/- M8 20/10/- assy
HSA-R2 M10x83 M10 83 mm 12 mm 25 Nm 17 mm 17 mm 20 mm 1x Std stud anchor HSA-R2 50 pc 2004219
20/10/- M10 20/10/- assy
HSA-R2 M12x115 M12 115 mm 14 mm 50 Nm 19 mm 19 mm 35 mm 1x Std stud anchor HSA-R2 25 pc 2004221
35/20/- M12 35/20/- assy
HSA-R2 M16x137 M16 137 mm 18 mm 80 Nm 24 mm 24 mm 85 mm 1x Std stud anchor HSA-R2 16 pc 2004222
40/25/- M16 40/25/- assy
228 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 229
Anchor Systems Anchor Systems
Machine setting tool for stud anchors HSV/ HSA/ HKD M6x25 6 mm 13 mm 7 mm 4 Nm 25 mm 12 mm 1x Flush anchor HKD M6x25 assy 100 pc 376894
HKD M6x25 bucket 6 mm 13 mm 7 mm 4 Nm 25 mm 12 mm 1x Flush anchor HKD M6x25 assy 1000 pc 376956
HST/ KB3/ KB-TZ
HKD M8x25 8 mm 9 mm 8 Nm 25 mm 12 mm 1x Flush anchor HKD M8x25 assy 100 pc 376957
Ordering designation Package contents Sales pack Item number
quantity HKD M8x25 bucket 8 mm 9 mm 8 Nm 25 mm 12 mm 1x Flush anchor HKD M8x25 assy 500 pc 376958
Setting tool HS-SC 150 1x Setting tool HS-SC 150 1 pc 337918 HKD M8x30 bucket 8 mm 9 mm 8 Nm 30 mm 15 mm 1x Flush anchor HKD M8x30 assy 500 pc 376960
HKD M10x40 10 mm 12 mm 15 Nm 40 mm 18 mm 1x Flush anchor HKD M10x40 assy 50 pc 376967
HKD M10x25 10 mm 12 mm 15 Nm 25 mm 12 mm 1x Flush anchor HKD M10x25 assy 100 pc 2037453
HKD M10x25 bucket 10 mm 12 mm 15 Nm 25 mm 12 mm 1x Flush anchor HKD M10x25 assy 500 pc 2037454
HKD M10x30 bucket 10 mm 12 mm 15 Nm 30 mm 13 mm 1x Flush anchor HKD M10x30 assy 500 pc 376966
HKD M10x40 bucket 10 mm 12 mm 15 Nm 40 mm 18 mm 1x Flush anchor HKD M10x40 assy 500 pc 378430
9
HKD M12x50 12 mm 14 mm 35 Nm 50 mm 22 mm 1x Flush anchor HKD M12x50 assy 50 pc 378544
HKD M16x65 16 mm 31 mm 18 mm 60 Nm 65 mm 31 mm 1x Flush anchor HKD M16x65 assy 25 pc 382941
Ordering designation Internal Base plate clear- Max. tighten- Anchor Thread Useable thread Package contents Sales pack Item
thread size ance hole ing torque length length length quantity number
HKD-SR M6x25 6 mm 7 mm 4 Nm 25 mm 12 mm 12 mm 1x Anchor HKD-SR M 6X25 100 pc 247951
HKD-SR M8x30 8 mm 9 mm 8 Nm 30 mm 15 mm 15 mm 1x Anchor HKD-SR M 8 X30 100 pc 247952
HKD-SR M10x40 10 mm 12 mm 15 Nm 40 mm 18 mm 18 mm 1x Anchor HKD-SR M10X40 50 pc 247953
HKD-SR M12x50 12 mm 14 mm 35 Nm 50 mm 22 mm 22 mm 1x Anchor HKD-SR M12X50 50 pc 247954
HKD-SR M16x65 16 mm 18 mm 60 Nm 65 mm 31 mm 31 mm 1x Anchor HKD-SR M16X65 25 pc 247955
230 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 231
Anchor Systems Anchor Systems
Ordering designation Internal Thread engage- Base plate Max. tightening Packaging Anchor Thread Package contents Sales pack Item ■ abZ (DiBt) approval for reusability in
thread size ment depth - max. clearance hole torque length length quantity number fresh concrete (10/15/20 Nmm2) for
HKV M6x25 6 mm 13 mm 7 mm 3 Nm Bag 25 mm 13 mm 1x Flush anchor 100 pc 384616 temporary applications
HKV M6x25 assy
HKV M8x30 8 mm 9 mm 7 Nm Bag 30 mm 15 mm 1x Flush anchor 100 pc 384966
HKV M8x30 assy
HKV M8x30 bucket 8 mm 9 mm 7 Nm Bucket 30 mm 18 mm 1x Flush anchor 500 pc 384967
HKV M8x30 assy
HKV M10x30 10 mm 12 mm 15 Nm Bag 30 mm 14 mm 1x Flush anchor 50 pc 384968
HKV M10x30
assy Screw anchor HUS3-H 8/10/14
HKV M10x40 10 mm 12 mm 15 Nm Bag 40 mm 19 mm 1x Flush anchor 50 pc 384969
Ordering Anchor Base plate Wrench/ Wrench Anchor Embedment Embedment Package contents Sales pack Item
HKV M10x40
designation size clearance hole nut size size length depth 1 depth 2 quantity number
assy
HUS3-H 8x55 8 12 mm 13 mm 13 mm 55 mm 50 mm 1x Screw anchor HUS3-H 8x55 5/-/- 50 pc 2079794
HKV M10x40 bucket 10 mm 12 mm 15 Nm Bucket 40 mm 19 mm 1x Flush anchor 500 pc 384970
5/-/-
HKV M10x40
assy HUS3-H 8x65 8 12 mm 13 mm 13 mm 65 mm 50 mm 60 mm 1x Screw anchor HUS3-H 8x65 15/5/- 50 pc 2079795
15/5/-
HKV M12x50 12 mm 23 mm 14 mm 30 Nm Bag 50 mm 23 mm 1x Flush anchor 25 pc 384971
HKV M12x50 HUS3-H 8x75 8 12 mm 13 mm 13 mm 75 mm 50 mm 60 mm 1x Screw anchor HUS3-H 8x75 50 pc 2079796
assy 25/15/5 25/15/5
HKV M12x50 bucket 12 mm 23 mm 14 mm 30 Nm Bucket 50 mm 23 mm 1x Flush anchor 250 pc 384972 HUS3-H 8x85 8 12 mm 13 mm 13 mm 85 mm 50 mm 60 mm 1x Screw anchor HUS3-H 8x85 50 pc 2079797
HKV M12x50 35/25/15 35/25/15
assy HUS3-H 8x100 8 12 mm 13 mm 13 mm 100 mm 50 mm 60 mm 1x Screw anchor HUS3-H 8x100 50 pc 2079798
50/40/30 50/40/30
HUS3-H 8x120 8 12 mm 13 mm 13 mm 120 mm 50 mm 60 mm 1x Screw anchor HUS3-H 8x120 50 pc 2079799
Setting tool HKD-TE-CX 70/60/50 70/60/50
HUS3-H 8x150 8 12 mm 13 mm 13 mm 150 mm 50 mm 60 mm 1x Screw anchor HUS3-H 8x150 50 pc 2079910
100/90/80 100/90/80
HUS3-H 10x60 10 14 mm 15 mm 15 mm 60 mm 55 mm 1x Screw anchor HUS3-H 10x60 5/-/- 50 pc 2079911
5/-/-
HUS3-H 10x70
15/-/-
10 14 mm 15 mm 15 mm 70 mm 55 mm 1x Screw anchor HUS3-H 10x70
15/-/-
50 pc 2079912
9
Ordering designation Diameter Length Working length Tool type Suitable for anchor size Sales pack Item number
HUS3-H 10x80 10 14 mm 15 mm 15 mm 80 mm 55 mm 75 mm 1x Screw anchor HUS3-H 10x80 50 pc 2079913
quantity
25/5/- 25/5/-
HKD-TE-CX M6 1/4”x25 8 mm 142 mm 27 mm All TE-C tools M6x25 1 pc 414472
HUS3-H 10x90 10 14 mm 15 mm 15 mm 90 mm 55 mm 75 mm 1x Screw anchor HUS3-H 10x90 50 pc 2079914
HKD-TE-CX M8x25 10 mm 162 mm 27 mm All TE-C tools M8x25 1 pc 414475 35/15/5 35/15/5
HKD-TE-CX M10x25 12 mm 162 mm 27 mm All TE-C tools M10x25 1 pc 414480 HUS3-H 10x100 10 14 mm 15 mm 15 mm 100 mm 55 mm 75 mm 1x Screw anchor HUS3-H 10x100 50 pc 2079915
45/25/15 45/25/15
HUS3-H 10x110 10 14 mm 15 mm 15 mm 110 mm 55 mm 75 mm 1x Screw anchor HUS3-H 10x110 50 pc 2079916
55/35/25 55/35/25
HUS3-H 10x130 10 14 mm 15 mm 15 mm 130 mm 55 mm 75 mm 1x Screw anchor HUS3-H 10x130 50 pc 2079917
75/55/45 75/55/45
HUS3-H 10x150 10 14 mm 15 mm 15 mm 150 mm 55 mm 75 mm 1x Screw anchor HUS3-H 10x150 50 pc 2079918
95/75/65 95/75/65
HUS3-H 14x75 14 18 mm 21 mm 21 mm 75 mm 65 mm 1x Screw anchor HUS3-H 14x75 16 pc 2079921
10/-/- 10/-/-
HUS3-H 14x100 14 18 mm 21 mm 21 mm 100 mm 65 mm 85 mm 1x Screw anchor HUS3-H 14x100 16 pc 2079922
35/15/- 35/15/-
HUS3-H 14x130 14 18 mm 21 mm 21 mm 130 mm 65 mm 85 mm 1x Screw anchor HUS3-H 14x130 16 pc 2079923
65/45/15 65/45/15
HUS3-H 14x150 14 18 mm 21 mm 21 mm 150 mm 65 mm 85 mm 1x Screw anchor HUS3-H 14x150 16 pc 2079924
85/65/35 85/65/35
232 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 233
Anchor Systems Anchor Systems
HUS3-HF 14x100 35/15/- 14 18 mm 21 mm 21 mm 21 mm 100 mm 65 mm 1x Screw anchor HUS3- 16 pc 2079930 Installation tools SIW 22T-A 1/2”
HF 14x100 35/15/-
Ordering designation Anchor Base plate Wrench/ Socket Wrench Anchor Embedment Package contents Sales Item
size clearance hole nut size size size length depth 1 pack number
Anchor reusability gauge HRG 8/10/14/16 quantity
HUS-V 8x55 5/- 8 12 mm 13 mm 13 mm 13 mm 55 mm 50 mm 1x Screw anchor HUS-V 8x55 50 pc 2079937
Key applications & advantages Technical data HUS-V 8x75 25/10 8 12 mm 13 mm 13 mm 13 mm 75 mm 50 mm 50 pc 2079938
■ Temporary applications on all grades of Head configuration n/a HUS-V 8x85 35/20 8 12 mm 13 mm 13 mm 13 mm 85 mm 50 mm 1x Screw anchor HUS-V 8x85 50 pc 2079939
concrete
Material Steel, zinc-plated (min. HUS-V 8x95 45/30 8 12 mm 13 mm 13 mm 13 mm 95 mm 50 mm 1x Screw anchor HUS-V 8x95 50 pc 2079940
■ Indicates whether the screw anchor can 5 µm)
composition HUS-V 10x60 5/- 10 14 mm 15 mm 15 mm 15 mm 60 mm 55 mm 1x Screw anchor HUS-V 10x60 50 pc 2079941
still be reused
Installation tools SIW 22T-A 1/2” HUS-V 10x85 30/10 10 14 mm 15 mm 15 mm 15 mm 85 mm 55 mm 1x Screw anchor HUS-V 10x85 50 pc 2079942
■ Always available on site in combination
HUS-V 10x95 40/20 10 14 mm 15 mm 15 mm 15 mm 95 mm 55 mm 1x Screw anchor HUS-V 10x95 50 pc 2079943
with the SIW 22T-A
HUS-V 10x105 50/30 10 14 mm 15 mm 15 mm 15 mm 105 mm 55 mm 1x Screw anchor HUS-V 10x105 50 pc 2079944
Ordering designation Anchor size Package contents Sales pack Item number
quantity
Check gauge HRG 8 HUS 8 1x Check gauge HRG 8 1 pc 2092003
Check gauge HRG 10 HUS 10 1x Check gauge HRG 10 1 pc 2090674
Check gauge HRG 14 HUS 14 1x Check gauge HRG 14 1 pc 2090675
Ordering Anchor size Base plate Bit Anchor Embedment Embedment Embedment Package contents Sales Item
designation clearance size length depth 1 depth 2 depth 3 pack number
hole quantity
HUS3-C 8x65 8 12 mm T45 65 mm 50 mm 1x Screw anchor HUS3-C 8x65 15/-/- 50 pc 2079931
15/-/-
HUS3-C 8x75 8 12 mm T45 75 mm 50 mm 60 mm 70 mm 1x Screw anchor HUS3-C 8x75 25/15/- 50 pc 2079932
25/15/-
HUS3-C 8x85 8 12 mm T45 85 mm 50 mm 60 mm 70 mm 1x Screw anchor HUS3-C 8x85 50 pc 2079933
35/25/15 35/25/15
HUS3-C 10x70 10 14 mm T50 70 mm 55 mm 1x Screw anchor HUS3-C 10x70 50 pc 2079934
15/-/-
HUS3-C 10x90 10 14 mm T50 90 mm 55 mm 75 mm 1x Screw anchor HUS3-C 10x90 50 pc 2079935
35/15/-
HUS3-C 10 14 mm T50 100 mm 55 mm 75 mm 85 mm 1x Screw anchor HUS3-C 10x100 50 pc 2079936
10x100
45/25/15
234 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 235
Anchor Systems Anchor Systems
Ordering Anchor Base plate Wrench Anchor Embedment Embedment Embedment Package contents Sales pack Item
designation size clearance hole size length depth 1 depth 2 depth 3 quantity number
HUS-H 8x55/-/5 8 12 mm 13 mm 55 mm 50 mm 1x Screw anchor HUS-H 8x55 50 pc 368728
HUS-H 8 12 mm 13 mm 90 mm 50 mm 60 mm 75 mm 1x Screw anchor HUS-H 8x90 50 pc 368731
8x90/15/30/40
HUS-H 10 14 mm 15 mm 75 mm 60 mm 70 mm 1x Screw anchor HUS-H 50 pc 368736
10x75/5/15 10x75
HUS-H 10 14 mm 15 mm 100 mm 60 mm 70 mm 85 mm 1x Screw anchor HUS-H 50 pc 368738
10x100/15/30/40 10x100
HUS-H 14 18 mm 21 mm 80 mm 70 mm 1x Screw anchor HUS-H 16 pc 368745
14x80/-/-/10 14x80
HUS-H 14 18 mm 21 mm 115 mm 70 mm 90 mm 110 mm 1x Screw anchor HUS-H 16 pc 368746
14x115/5/25/45 14x115
HUS-H 14 18 mm 21 mm 135 mm 70 mm 90 mm 110 mm 1x Screw anchor HUS-H 16 pc 368747
14x135/25/45/65 14X135
HUS-H 14 18 mm 21 mm 160 mm 70 mm 90 mm 110 mm 1x Screw anchor HUS-H 16 pc 368748
14x160/50/70/90 14x160
236 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 237
Anchor Systems Anchor Systems
Ordering designation Anchor diameter Anchor Anchor Base plate Required Wrench/ Wrench Package contents Sales Item
(imperial) size length clearance tightening nut size size pack number
hole torque quantity
HLC-H 12x55/15 1/2 in 12 mm 55 mm 14 mm 40 Nm 17 mm 17 mm 1x Anchor HLC-H 12x55/15 assy 50 pc 385848
HLC-H 12x75/35 1/2 in 12 mm 75 mm 14 mm 40 Nm 17 mm 17 mm 1x Anchor HLC-H 12x75/35 assy 50 pc 385849
HLC-H 12x100/60 1/2 in 12 mm 100 mm 14 mm 40 Nm 17 mm 17 mm 1x Anchor HLC-H 12x100/60 assy 25 pc 385852
HLC-H 10x40/5 3/8 in 10 mm 40 mm 12 mm 25 Nm 13 mm 13 mm 1x Anchor HLC-H 10x40/5 assy 50 pc 385841
HLC-H 10x60/25 3/8 in 10 mm 60 mm 12 mm 25 Nm 13 mm 13 mm 1x Anchor HLC-H 10x60/25 assy 50 pc 385842
HLC-H 10x80/45 3/8 in 10 mm 80 mm 12 mm 25 Nm 13 mm 13 mm 1x Anchor HLC-H 10x80/45 assy 50 pc 385845
HLC-H 10x100/65 3/8 in 10 mm 100 mm 12 mm 25 Nm 13 mm 13 mm 1x Anchor HLC-H 10x100/65 assy 50 pc 385847
HLC-H 16x60/10 5/8 in 16 mm 60 mm 18 mm 50 Nm 19 mm 19 mm 1x Anchor HLC-H 16x60/10 assy 10 pc 385853
HLC-H 16x100/50 5/8 in 16 mm 100 mm 18 mm 50 Nm 19 mm 19 mm 1x Anchor HLC-H 16x100/50 assy 15 pc 385854
HLC-H 16x140/90 5/8 in 16 mm 140 mm 18 mm 50 Nm 19 mm 19 mm 1x Anchor HLC-H 16x140/90 assy 10 pc 385855
HLC-H 8x40/10 5/16 in 8 mm 40 mm 10 mm 8 Nm 10 mm 10 mm 1x Anchor HLC-H 8x40/10 assy 100 pc 385836
HLC-H 8x55/25 5/16 in 8 mm 55 mm 10 mm 8 Nm 10 mm 10 mm 1x Anchor HLC-H 8x55/25 assy 100 pc 385838
HLC-H 8x70/40 5/16 in 8 mm 70 mm 10 mm 8 Nm 10 mm 10 mm 1x Anchor HLC-H 8x70/40 assy 100 pc 385840
238 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 239
Anchor Systems Anchor Systems
■ Pre-assembled anchor for fast, easy Head configuration Closed eye bolt Environmental Indoor, dry conditions
installation conditions
Environmental Indoor, dry conditions
■ Eyelet version Type of fastening Pre-fastening,
conditions Through-fastening
Material Steel, zinc-plated (min.
Material Steel, zinc-plated
composition 5 µm)
Key applications & advantages composition
Installation All
Installation All
direction ■ Securing support frames, timber frames
for light stand-off cladding, facade direction
Material, corrosion Steel, zinc-plated
Additional product With pre-assembled
panels
information screw
Ordering Anchor Anchor Base plate Required tight- Max. fixture thickness at Drilling Package contents Sales pack Item ■ Fastening window and door frames
designation size length clearance hole ening torque standard embedment depth depth quantity number ■ Pre-assembled screw Material, corrosion Steel, zinc-plated
HLC-EC 8x40 8 mm 40 mm 10 mm 8 Nm 14 mm 40 mm 1x Anchor HLC-EC 8x40 assy 50 pc 385871 ■ Ergonomic setting tool for thread sizes Accessories HHD, HHD Pro
HLC-EC 10x50 10 mm 50 mm 12 mm 25 Nm 20 mm 50 mm 1x Anchor HLC-EC 10x50 assy 50 pc 385872 M4 to M8
HLC-EC 16x100 16 mm 100 mm 18 mm 50 Nm 59 mm 75 mm 1x Anchor HLC-EC 16x100 10 pc 385873
assy
Cavity anchor HHD-S
Sleeve anchor (counter sunk) HLC-SK
Key applications & advantages Technical data
■ Suitable for various base materials Head configuration Countersunk
Ordering designation Anchor size Anchor length Bit size Max. fixture thickness at standard embedment depth Sales pack Item number
thanks to the expansion principle quantity
Environmental Indoor, dry conditions
■ Variety of lengths and sizes for a multi- HHD-S M4/19X45 M4 45 mm PH1 25 mm 50 pc 332063
conditions
tude of applications HHD-S M5/12X52 M5 52 mm PH2 30 mm 50 pc 332066
Type of fastening Through-fastening
■ Pre-assembled anchor for fast, easy HHD-S M5/25X65 M5 65 mm PH2 30 mm 50 pc 332067
installation Material Steel, 8.8 grade, zinc-
plated (min. 5 µm) HHD-S M6/12X52 M6 52 mm PH3 30 mm 50 pc 332070
composition
HHD-S M6/24X65 M6 65 mm PH3 30 mm 50 pc 332071
Installation All
HHD-S M6/40X80 M6 80 mm PH3 30 mm 50 pc 332072
direction
Material, corrosion Steel, zinc-plated
Setting tool HHD
Ordering designation Anchor Anchor Base plate Required tightening Bit size Max. fixture thickness Drilling Package contents Sales Item
size length clearance hole torque at standard embedment depth pack number
depth quantity
HLC-SK 8x60/25 8 mm 60 mm 10 mm 8 Nm T30 25 mm 40 mm 1x Anchor HLC-SK 100 pc 385859
8x60/25 assy
HLC-SK 8x90/55 8 mm 90 mm 10 mm 8 Nm T30 55 mm 40 mm 1x Anchor HLC-SK 100 pc 385861
8x90/55 assy
HLC-SK 10x85/45 10 mm 85 mm 12 mm 25 Nm T40 45 mm 50 mm 1x Anchor HLC-SK 50 pc 385863 Ordering designation Sales pack Item number
10x85/45 assy quantity
HLC-SK 10x105/65 10 mm 105 mm 12 mm 25 Nm T40 65 mm 50 mm 1x Anchor HLC-SK 50 pc 385864 Setting tool HHD-S 1 pc 332076
10x105/65 assy
HLC-SK 10x130/95 10 mm 130 mm 12 mm 25 Nm T40 95 mm 50 mm 1x Anchor HLC-SK 25 pc 385865
Hook and ring anchors HA 8
HLC-SK 12x80/35 12 mm 80 mm 14 mm 40 Nm T40 35 mm 65 mm
10x130/90 assy
1x Anchor HLC-SK 50 pc 385866
9
12x80/35 assy
Ordering designation Anchor size Anchor length Standard embedment depth Drilling depth Package contents Sales pack Item number
quantity
HA 8 H1 8 mm 66 mm 40 mm 50 mm 1x Hook anchor HA8H1 assy 100 pc 57036
HA 8 R1 8 mm 66 mm 40 mm 50 mm 1x Ring anchor HA8 R1 assy 100 pc 57059
Ordering designation Anchor size Anchor length Bit size Standard embedment depth Max. fixture thickness at stan-
dard embedment depth
Drilling depth Sales pack
quantity
Item number
Sleeve anchor with screw and washer HAM with bolt
HT 10X72 10 mm 72 mm PZ3 30 mm 42 mm 50 mm 100 pc 369263
Key applications & advantages Technical data
HT 10X112 10 mm 112 mm PZ3 30 mm 82 mm 50 mm 100 pc 369265
■ Internally-threaded solution for all solid Head configuration Hex head
HT 10X132 10 mm 132 mm PZ3 30 mm 102 mm 50 mm 100 pc 369266 base materials
Environmental Indoor, dry conditions
■ Works on all solid base materials
Wedge anchor DBZ ■ Protective plastic ring prevents defor-
conditions
Type of fastening Pre-fastening
mation caused by hammering
Installation All
direction
Material, corrosion Steel, zinc-plated
Ordering Anchor Anchor Internal Base plate Thread length Useable thread length Standard embedment depth Sales pack quantity Item number
Ordering Anchor Anchor Base plate Standard Max. fixture Thickness fas- Drilling Package contents Sales Item designation size length thread size clearance hole
designation size length clearance hole embedment thickness tened - min. depth pack number
depth at standard quantity HAM M6X50 M6 60 mm 6 mm 7 mm 5 mm 5 mm 60 mm 100 pc 305857
embedment HAM M8X60 M8 75 mm 8 mm 9 mm 10 mm 10 mm 75 mm 50 pc 305858
depth
HAM M10X80 M10 85 mm 10 mm 12 mm 15 mm 15 mm 85 mm 25 pc 305859
DBZ 6/4.5 6 mm 40 mm 7 mm 32 mm 5 mm 0 mm 40 mm 1x Wedge anchor DBZ sht.assy 100 pc 256312
HAM M12X90 M12 95 mm 12 mm 14 mm 20 mm 20 mm 95 mm 25 pc 305860
DBZ 6/35 6 mm 71 mm 7 mm 32 mm 35 mm 5 mm 55 mm 1x Wedge anchor DBZ long assy 100 pc 256311
240 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 241
Anchor Systems Anchor Systems
■ Typical applications for metal fabrica- Anchor type Anchor with screw Head configuration Countersunk Phillips
tors such as fastening handrails, win-
Head configuration Countersunk Environmental Indoor, dry conditions
dow bars, railings, balustrades, etc.
conditions
■ Fastening wooden substructures for Environmental Indoor, dry conditions
Type of fastening Through-fastening
ventilated facades conditions
■ Fastening door and window frames Type of fastening Through-fastening Key applications & advantages Material Body: polyamide,
composition Screw: steel, zinc-
■ Flexible embedment depth (approved at Material Steel, zinc-plated (min. ■ Fastening trim strips, battens and plated (min. 5 µm)
50 mm and 70 mm embedment depth) - composition 5 µm), Polyamide components for electrical and plumbing Installation All
the ideal anchor for a huge range of ap- installations
Suitable for Yes direction
plications in virtually all base materials
cracked concrete ■ Fastening components for electrical Material, corrosion Steel, zinc-plated
■ Suitable for fastening thicknesses up to with redundant and plumbing installations
260 mm (anchor lengths from 60 mm to fastenings In-service tempera- -40 - 80 °C
■ For universal use on many materials,
310 mm) ture – range
Material, corrosion Steel, zinc-plated including perforated brick and block
Installation tem- -10 °C ■ The hammer-driven screw can also
perature - min. be driven or unscrewed using a
screwdriver
Ordering designation Anchor Anchor Bit Standard em- Max. fixture thickness at Drilling Package contents Sales pack Item
size length size bedment depth standard embedment depth depth quantity number
HPS-1 R 5/15x35 M5 37 mm PZ2 20 mm 15 mm 30 mm 1x Impact anchor HPS-1 R 5/15 assy 200 pc 260358
HPS-1 R 6/10x35 M6 37 mm PZ2 25 mm 10 mm 40 mm 1x Impact anchor HPS-1 R 6/10 assy 150 pc 230525
HPS-1 R 6/15x40 M6 42 mm PZ2 25 mm 15 mm 40 mm 1x Impact anchor HPS-1 R 6/15 assy 100 pc 260360
HPS-1 R 6/25x50 M6 52 mm PZ2 25 mm 25 mm 40 mm 1x Impact anchor HPS-1 R 6/25 assy 100 pc 260361
HPS-1 R 6/40x65 M6 67 mm PZ2 25 mm 40 mm 40 mm 1x Impact anchor HPS-1 R 6/40 assy 100 pc 260362
HPS-1 R 8/30x60 M8 63 mm PZ2 30 mm 30 mm 50 mm 1x Impact anchor HPS-1 R 8/ 30 assy 50 pc 260364
HPS-1 R 8/80x110 M8 113 PZ2 30 mm 80 mm 50 mm 1x Impact anchor HPS-1 R 8/ 80 assy 50 pc 260366
mm
242 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 243
Anchor Systems Anchor Systems
with cavities - for use with standard composition pecially electrical installations, sanitary composition
wood screws Installation Wall fixtures, etc. Installation All
■ Anchoring in perforated brick or block, direction ■ For use on a wide range of materials: direction
drywall, concrete Material, corrosion Plastic concrete, solid brick, hollow brick, gas LEED information Yes
■ The wings spring out and adapt to all (aerated) concrete, gypsum panel available
In-service tempera- -40 - 80 °C
materials ture – range ■ High holding power Material, corrosion Plastic
Ordering designation Anchor diameter Anchor Anchor length Packaging Colour Max. fixture thickness Drilling depth Package contents Sales pack Item
(imperial) size at standard embedment quantity number
depth
HLD 2 3/8 in 10 mm 28 mm Box White 33 mm 50 mm 1x Light-duty 150 pc 335506
anchor HLD 2
Ordering Anchor Anchor Base plate Packaging Colour Standard embedment Drilling Package contents Sales pack Item
HLD 3 3/8 in 10 mm 35 mm Box White 40 mm 56 mm 1x Light-duty 100 pc 335507 designation size length clearance hole depth depth quantity number
anchor HLD 3 HUD-1 5x25 5 mm 25 mm 5 mm Bag Red 25 mm 35 mm 1x Universal anchor HUD-1 5X25 200 pc 338708
HLD 4 3/8 in 10 mm 44 mm Box White 49 mm 66 mm 1x Light-duty 100 pc 335508 HUD-1 6x30 6 mm 30 mm 6 mm Bag Red 30 mm 40 mm 200 pc 338709
anchor HLD 4
HUD-1 8x40 8 mm 40 mm 8 mm Bag Red 40 mm 55 mm 1x Universal anchor HUD-1 8X40 200 pc 338710
HUD-1 10x50 10 mm 50 mm 10 mm Bag Red 50 mm 65 mm 1x Universal anchor HUD-1 10X50 100 pc 338711
HUD-1 12x60 12 mm 60 mm 13 mm Bag Red 60 mm 80 mm 1x Universal anchor HUD-1 12X60 100 pc 331619
HUD-1 14x70 14 mm 70 mm 15 mm Bag Red 70 mm 90 mm 1x Universal anchor HUD-1 14X70 50 pc 331620
Ordering designation Anchor diam- Anchor Anchor Base plate clearance hole Packaging Colour Standard embed- Package Sales pack Item
eter (imperial) size length ment depth contents quantity number
HUD-L 10x70 3/8 in 10 mm 70 mm 10 mm Box Red 70 mm 1x Anchor 100 pc 315940
HUD-L 10X70
244 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 245
Anchor Systems Anchor Systems
Ordering designation Anchor length Insulation material thickness fastened - min. Insulation material thick- Standard embedment depth Sales pack Item number
ness fastened - max. quantity
IDMS 0/ 3 80 mm 0 mm 30 mm 50 mm 250 pc 65752
IDMS 3/ 6 110 mm 30 mm 60 mm 50 mm 250 pc 65753
Installation tem- 40 °C
9
perature - max.
Installation tem- 0 °C
perature - min.
ETICS No
Ordering Colour Min. embedment Insulation Insulation material thickness Standard embedment Package contents Sales Item
designation depth material thick- fastened - max. depth pack number
ness fastened quantity
- min.
IDP 0/2 White 28 mm 0 mm 20 mm 25 mm 1x Insulation mandrel IDP 0/2 250 pc 332105
IDP 2/4 White 28 mm 20 mm 40 mm 25 mm 1x Insulation mandrel IDP 2/4 250 pc 332106
IDP 4/6 White 28 mm 40 mm 60 mm 25 mm 1x Insulation mandrel IDP 4/6 250 pc 332107
IDP 6/8 White 28 mm 60 mm 80 mm 25 mm 1x Insulation mandrel IDP 6/8 250 pc 332108
IDP 8/10 White 28 mm 80 mm 100 mm 25 mm 1x Insulation mandrel IDP 8/10 250 pc 332109
IDP 10/12 White 28 mm 100 mm 120 mm 25 mm 1x Insulation mandrel IDP 10/12 250 pc 332110
IDP 13/15 White 28 mm 120 mm 150 mm 25 mm 1x Insulation mandrel IDP 13/15 250 pc 332111
246 Anchor Systems Contents Page www.hilti.co.za | 08000 23331 www.hilti.co.za | 08000 23331 Anchor Systems Contents Page 247