You are on page 1of 9

LED iBoard

User Manual

(LED iBoard>

Upgrade Version:V1.0
LED iBoard

Summay
1> Accessory

2. Features:

1> World Language is supported.

2> The single and tri-color are supported.

3> Supporting one line or two lines English characters.

4> 10 text messages (each text includes1,000 characters) or 10pcs images( Resolution 16*xxx
pixels), store max 10,000 ASCII letters as well as 5,000 Assia Letter.

5> More than 36 effect: (display automaticly by PC)/ Shift left (right) Consecutively/ left / shift right
/move up/ move down/ display directly / snow/ flash / highlight flash / laser / wafted to the upper left
(right) corner / wafted to the lowerleft (right) corner / shaking / Automatic show.

6> 6 speeds.

7> 4 Classess Brightness, 25%, 50%, 75%, 100%, Adjust by button.

8> GIF animation boot (Users can make by yourself. open/ close freely .

9> Charging icon open or close freely.

10>Large-capacity rechargeable polymer battery, working time 8-16 hours, charging time 5-6
hours, it also supports to connect with power supply directly.

11>The Software applied to Windows XP/Vinsta/Windows 7/Windows 8.


LED iBoard
3. Description of LED iBoard
There are 4 buttons on the right of LED IBoard. Any detail information as below:

Attention: The USB port is easy to broke, please input it carefully or it may be can’t charge and
communication.
Switch On/Off your iBoard:
Firstly, make sure the battery with electricity before usage. Turn on the switch, and the pre-stored
message will run automatically. The switch turned off or the battery used out, the iboard will turn off
automatically.

4. Setup Software
Edited message can be sent to iBoard through USB Communication. All contents of CD-ROM as
following:
1> Click on the CD-ROM, then some files showing:

Firstly, click on , then appear

Select match you PC system driver program to setup.

Secondly, click on then appear ,after select


LED iBoard

and install the Software step by step. When installation is finished, your computer

desktop will appear a icon .

5. Operation Software

1> Click icon , software interface as follow: (surface brief description)

2> How to edit:

Text Edit : Edit the Text . Choose the .Will appear the Text Editor Area as follow.
LED iBoard

Edit the text as you want. Setup the size, font, Bold, Italic, Underline for the character. Can be edited
as Keep Center/ Left/Right . Or display English characters in 2 rows. Choose the Character display
color, such as the red , green, yellow or mixture. Don’t forget to click Sure to confirm it.

Image Editor:
Design or Open the Image: Click the Image Editor button on the software interface. Open the
Software –Create New Bitmap file. Choose the size. Width Max250 dots, Height Max 16 dots. Click
OK to confirm it . Check the picture as follow:

When finished the Image, save as BMP format. Like as picture:

Or click the logo , see the Interface as follows;


LED iBoard

Add the right size image(JPG,BMP,PNGXPM)


3>Effect:Choose the actions. You can try to choose the 36 types actions in our software interface.
Such as Auto, show now, move, shutter etc.

4>Settings:
A: Display Options: Setup whether display the boot animation or the Charging Icon.

B. How to setup the boot animation? You just need download the GIF format animation.

C. Set software interface, inside you can select what your like background.

5> Speed: Click speed icon for choosing, First grade means fastest, Sixth grade means slowest;
LED iBoard
6> Duration of stay in six grade: 6s,5s,4s,3s,2s,1s. Applied to each display effect, except of Auto
mode;

7> Border: 4 different types rotate edge, include 38 display effects, except of Auto mode;
8>Animation: Click icon to choose your GIF format picture, GIF frame number is no more
than 4 frames and only display combination color of pure red, pure green, pure yellow.

9> Time setting: Click icon will show below interface:

Text (Prefix) and Text(Postfix) are used for edit message before or after time dispaly. Support
preview your all setting. Click “Sure” after confirm. If proofread time the same as you PC, please

click icon .

10>Count Down setting: Click icon and will show below interface:

Text(Prefix) and Text(Postfix) are used for edit message before or after time dispaly.
Icon is applied to set data move or non-move.
Icon is applied to set “0” whether display or not before timer data.

Icon is applied to set days.

After operation, please preview and confirm your setting. If confirm, click “sure” and send to led

display sign. If proofread time the same as you PC, please click icon .
LED iBoard

11> ID: Set ID number for led display sign. Current default ID No. 1 (Special for 485 function);

12> Sending texts: LED display sign is connected with computer by USB cable.
If it connect successfully, please click “ Send” icon, it will store texts soon.
Remark: Green color means sending this text; Red color means don’t send this text.

6. The software can support model and parameter:

Model Size(mm> Package Size Net Weight Gross Weight Display English
letter
C1664 310*110*21mm 420 x 160 x 50mm 506g 716g 8
C1696 423*110*21mm 550*160 *50mm 712g 962g 12
C16128 550*110*21mm 680*160 *50mm 920g 1200g 16
B1664 182 *54 *15mm 305 *105x*45mm 174g 300g 8
B1696 258*54*15mm 385*105*45mm 240g 425g 12
B16128 338*54*15mm 467*105* 45mm 300g 550g 16
L1664 340*94*15mm 458*141*38mm 418g 620g 8
L1696 500*94*15mm 618*141*38mm 604g 833g 12
L16128 660*94*15mm 778*141*38mm 767g 1044g 16

7.Communication:
1> Connect the IBoard USB Port to the computer one. Then click on the Editor, sending them after
editing finished. The message will be uploaded to IBoard directly.
2> Choose port. It is usually based on your fact to choose. If using dummy USB port, the software will
setup AUTO or setup COM3. If using port communication cable, it usually use AUTO.
3> Connect it to the computer
Any detail process, please refer to the following picture.

Communicating and charging


8.Charge:
LED iBoard

Charging time is about 4-5 hours if it is use out of electricity.


Turn on the IBoard, then connected to the computer. At that time, the screen will display charging icon
which is showing current electricity capability. After finished, the screen will display full charging icon.
The last step is separate IBoard from charger or the computer. Turn off it.
Notice: long time charging has no any effect on the life-span of battery.

======================= Thank you for using it ===========================

You might also like