Professional Documents
Culture Documents
Version 1.0
QUESTION NO: 1
The system volumes are being backed up twice a week Data volumes are backed up four
times a day
CDP is used for critical data only
Data change rate is 1-3% daily
Data is kept for three months
Compressible data will only be compressed at the disaster recovery site
What is an appropriate amount of disk space to start with in the repository?
Answer: C
QUESTION NO: 2
A customer wants to back up three Microsoft Exchange servers with IBM Tivoli Storage
Manager FastBack (TSM FastBack), but does not have a requirement to use individual
item restore of items in any of their Microsoft Exchange servers. Each Microsoft
Exchange server has four cores and they will all back up to the same TSM FastBack
server. The TSM FastBack server also has four cores. In this configuration, what are the
minimum TSM FastBack products required by the customer?
A. The customer will need a TSM FastBack server, and three TSM FastBack clients.
B. The customer will only need TSM FastBack for Exchange, and TSM FastBack server.
C. The customer will need TSM FastBack for Exchange for use on the TSM FastBack
server.
D. The customer will need TSM FastBack for Exchange, and TSM FastBack Disaster
Recovery.
Answer: A
QUESTION NO: 3
What is the last step to be taken for a dissimilar hardware bare machine recovery (BMR)?
Answer: B
QUESTION NO: 4
When performing an e-mail restore using Simple Mail Transfer Protocol (SMTP), why is
there a prompt to provide a sender e-mail address?
Answer: D
QUESTION NO: 5
How can the configuration of the FTP Server be tested?
A. Use the IBM Tivoli Storage Manager FastBack Client Configurator to force an
immediate data replication operation.
B. Use IBM Tivoli Storage Manager FastBack Mount to schedule a near-term replication
operation, then attempt to mount the replicated volume.
C. Launch the IBM Tivoli Storage Manager FastBack Manager interface, access the DR
Configuration tab, and click the Test Configuration button.
D. Open a command prompt on the Disaster Recovery (DR) Hub Server and attempt to
use FTP to connect to the IBM Tivoli Storage Manager FastBack Server.
Answer: C
QUESTION NO: 6
An IBM Tivoli Storage Manager FastBack (TSM FastBack) protected server
(\\Server_27.mycompany.com, 192.168.0.20) has suffered a hardware failure of the
primary operating system drive. A similar replacement drive is found and installed. A
Bare Machine Recovery (BMR) CD has been created and tested on this server prior to the
failure. The TSM FastBack server is named Austin_FB and has an IP address of
192.168.0.55. Now it is time to start the restore of the system OS drive. The administrator
enters the name of the repository share as \\Austin_FB\FB_REP_E and OK. An error
message is returned that \\Austin_FB\FB_REP_E is not a valid repository. The
administrator re-enters the repository share as \\192.168.0.55\FB_REP_E and connects.
What is the problem?
QUESTION NO: 7
Which information is displayed when right-clicking the snapshot in the Snapshots
Monitor display and choosing events for a specific job?
Answer: D
QUESTION NO: 8
Which two options describe Microsoft Exchange data restore levels? (Choose two.)
A. File
B. Block
C. Subfile
D. Mailbox
E. Message
Answer: D, E
QUESTION NO: 9
How is a disk removed from the IBM Tivoli Storage Manager FastBack (TSM FastBack)
repository?
A. A disk cannot be removed from the repository once it has been used.
B. Stop TSM FastBack server, move the repository files to another disk, update the TSM
FastBack configuration file, and restart the TSM FastBack server.
C. Select Remove from repository (with snapshot relocation) using the TSM FastBack
Server Manager tool, and the server will move the files in the repository automatically.
D. Select Remove from repository (with snapshot relocation) using the TSM FastBack
Server Manager tool, stop TSM FastBack Server, move the repository files to another
disk, and restart TSM FastBack server.
Answer: C
QUESTION NO: 10
Each snapshot has an icon showing its present status. Which information can be obtained
by simply viewing the icon next to the snapshot?
A. Snapshot is cancelled.
B. Repository out of space condition exists.
C. Continuous Data Protection process is pending.
D. Continuous Data Protection Snapshot has completed successfully.
Answer: D
QUESTION NO: 11
The IBM Tivoli Storage Manager FastBack (TSM FastBack) Server host name is
"TSMFTBSRV" and the repository is located on the R:\ drive. A restore needs to be
performed on a client by using the TSM FastBack Mount feature. The TSM FastBack
Mount has been opened to select the repository, but there is no repository listed. The
"Browse for folder " option is selected. What should be typed in the "Input your remote
repository share" field?
A. R:\fb_rep\
B. \\tsmftbsrv\
C. \\tsmftbsrv\rep$
D. \\tsmftbsrv\fb_rep_<branch name>\
Answer: D
QUESTION NO: 12
The IBM Tivoli Storage Manager FastBack (TSM FastBack) server name has been
changed, and now the repository cannot be mounted. Which action will allow access to
this repository again?
Answer: A
QUESTION NO: 13
Three servers ( A, B, and C) need data backed up. Server A has 200 GB of data with an
expected 10% daily change rate Server B has 600 GB of data with an expected 5% daily
change rate Server C has 440 GB of data with an expected 15% daily change rate What is
the total daily data delta to be backed up on a daily basis?
A. 116 GB
B. 116 MB
C. 1.16 GB
D. 1160 GB
Answer: A
QUESTION NO: 14
A volume has been lost in the production environment, but it is protected by IBM Tivoli
Storage Manager FastBack (TSM FastBack) and a valid snapshot exists for it. What are
the steps to perform a volume restore while making the data available during the restore?
A. from TSM FastBack Mount UI, select volume for restore, select target volume, initiate
restore, open My Computer to view restored volume when it appears
B. open My Computer, launch Computer Management, locate target volume, right click
and choose Initiate Restore, open My Computer to view restored volume when it appears
C. open TSM FastBack Central Control Station, click on Snapshots table, select snapshot
to re-cover, select target volume, initiate restore, open My Computer to view restored
volume when it appears
D. open TSM FastBack Mount UI, click TSM FastBack Recovery Manager, right click
volume for re-store, initiate restore providing appropriate responses, open My Computer
to view restored volume when it appears
Answer: A
QUESTION NO: 15
Which two components are used with Volume Shadow Copy Service capable IBM Tivoli
Storage Manager FastBack clients? (Choose two.)
A. Volume
B. Provider
C. Snapshot
D. Controller
E. Requestor
Answer: B, E
QUESTION NO: 16
With a correctly configured IBM Tivoli Storage Manager FastBack (TSM FastBack)
policy configured to perform an incremental backup, what will happen when the
incremental backup is run for the first time to a newly installed TSM FastBack Client that
has successfully connected to the TSM FastBack server?
A. The incremental policy schedule will be ignored until a full policy schedule has been
defined and successfully run.
B. TSM FastBack will automatically perform a full backup, even though an incremental
backup is specified as this is the first backup.
C. The incremental policy schedule will fail, because a full backup policy needs to have
successfully run before any incremental backup policy.
D. The incremental backup will run successfully; however, only the incremental changes
to the TSM FastBack Clients disk since the TSM FastBack client installed will be backed
up.
Answer: B
QUESTION NO: 17
An enterprise is a 24/7 operation and has a lot of WAN traffic. Due to the low network
bandwidth available for cleanup, cleanup should run when the entire job is eligible.
Which level of cleanup configuration should be selected?
A. Low
B. High
C. Minimal
D. Maximal
Answer: C
QUESTION NO: 18
The IBM Tivoli Storage Manager FastBack (TSM FastBack) repository is almost full. A
service window is not available where the TSM FastBack server can be taken down to
add additional hardware. More repository space is needed until additional hardware can
be installed. How can more space be added to the repository?
A. Edit all policies on the TSM FastBack server to Archive all data older than 90 days.
B. Turn on the TSM FastBack Migrate to Tape function for all data older than 90 days.
C. Enable the TSM FastBack User Quota limitations to keep users from being able to
increase their storage on the protected servers.
D. Browse a server and look for a drive that is not being protected by TSM FastBack.
Create a new folder and make this folder part of the repository using Add repository
space from the Repository pool.
Answer: D
QUESTION NO: 19
When using the IBM Tivoli Storage Manager FastBack (TSM FastBack) for Bare
Machine Recovery CD, which role can perform a restore operation in a non-Active
Directory environment?
A. TSM Administrators
B. Domain Administrators
C. TSM Fastback Administrators
D. Operating System Administrators
Answer: C
QUESTION NO: 20
A server has two internal disks and each disk is 73 GB in size. The first disk is partitioned
into 30 GB for the operating system, and has an unused partition of 43 GB. The second
disk has been used by IBM Tivoli Storage Manager FastBack as a disk repository. Can
the unused partition on the operating system disk be added to the repository as an
additional disk repository?
A. No.
B. Yes, no server reboot is required.
C. Yes, but the server will need to be rebooted.
D. No, because it is smaller than the initial repository disk.
Answer: A
QUESTION NO: 21
An enterprise maintains a high number of generations of snapshots, which use a lot of
storage space. In addition, there is a lot of network traffic. The enterprise needs to select a
level of cleanup that will recover space from old snapshot generations, with little impact
on the bandwidth. Which level of cleanup configuration needs to be selected?
A. Low
B. High
C. Minimal
D. Maximal
Answer: A
QUESTION NO: 22
Why should machines on which IBM Tivoli Storage Manager FastBack for Bare Machine
Recovery was performed never be left unmonitored?
Answer: A
QUESTION NO: 23
How is the Administrative Command Line accessed?
A. <installDir>/shell/FastBackshell.exe
Answer: A
QUESTION NO: 24
Which dynamic disk type is supported?
A. Simple Volumes
B. Striped Volumes
C. Mirrored Volumes
D. Spanned Volumes
Answer: A
QUESTION NO: 25
An IBM Tivoli Storage Manager FastBack (TSM FastBack) Server has been installed and
an Administrator has added one client that was previously connected to another TSM
FastBack Server. The new client does not appear in the client list on the TSM FastBack
Server. What is a reason for this?
Answer: C
QUESTION NO: 26
An IBM Tivoli Storage Manager FastBack (TSM FastBack) protected server cannot be
seen in the TSM FastBack System Manager. There is no reference to the server name or
any of the drive resources of that server. Which option should help isolate the problem?
A. Uninstall the TSM FastBack client, reboot the client server and reinstall the TSM
FastBack client again.
B. Reboot the TSM FastBack Server and see if the reboot will allow the server to
communicate with the TSM FastBack client.
C. Check the Windows Services to validate the client service is running and then check
for errors in the TSM FastBack Client logs.
D. On the protected server, Open \Program Files\Tivoli\TSM\FastBack\Client\client.ini to
verify the TSM FastBack server Name or IP address.
Answer: C
QUESTION NO: 27
An incremental backup policy configured to protect the data disk of a Microsoft
Exchange server runs once every 2 hours. This policy is configured with 48 generations,
and the first full backup was done on Sunday to the server. On Monday, Tuesday, and
Wednesday, the total size of incremental backup resulted in a backup of 50 MB for each
snapshot. On Thursday the 2 a.m. backup was noted to be 5 GB by the IBM Tivoli
Storage Manager FastBack (TSM FastBack) Status Monitor, and was still a backup type
of Incremental. Assuming that no software was installed or removed on the server, and
that there was no change in usage patterns by users on Thursday, what is the likely cause
of the increased backup?
Answer: C
QUESTION NO: 28
What is one of the first steps in troubleshooting an installation of IBM Tivoli Storage
Manager FastBack (TSM FastBack) Mount/Instant Restore that is not working?
A. restart the TSM FastBack Manager task with the active flag
B. ensure that the TSM FastBack repository has been replicated
C. erase the FastBack.conf file location in boot drive root directory
D. verify that the TSM FastBack Mount/Instant Restore Service is running
Answer: D
QUESTION NO: 29
On the IBM Tivoli Storage Manager FastBack (TSM FastBack) Server,where are the
TSM FastBack log files located?
A. C:\Program Files\Tivoli\TSM\FastBack\Server\Logs
B. C:\Documents and Settings\All Users\Application Data\Tivoli\TSM\FastBack\Server
C. C:\Documents and Settings\Administrator\Application
Data\Tivoli\TSM\FastBack\Server
D. C:\Documents and Settings\All Users\Application
Data\Tivoli\TSM\FastBack\Server\Logs
Answer: B
QUESTION NO: 30
A company has three branch locations and one core site with an IBM Tivoli Storage
Manager FastBack Server installed at each site. Each location is protected by a firewall.
The IT administrator just installed a TSM Fastback DR Hub Server on a new server in the
core site. Which firewall ports must be allowed for communication between the TSM
FastBack DR Hub Server and other TSM FastBack Servers?
A. ftp - 20 and 21
B. telnet - 23
C. https - 443
D. tsm - 1500 and 1501
Answer: A
QUESTION NO: 31
The IBM Tivoli Storage Manager FastBack (TSM FastBack) Central Control Station is
not working. Which steps should be performed to investigate the reason for this?
A. uninstall TSM FastBack Client and reinstall
B. stop and restart TSM FastBack Recovery Service, check Event logs
C. check installation log, presence of executable and Logs/Logevents files
D. delete C:\Documents and Settings\All Users\Application
Data\Tivoli\TSM\CCStation\branches\Branch_Name\FastBackManager.ini and restart
Answer: C
QUESTION NO: 32
IBM Tivoli Storage Manager FastBack (TSM FastBack) is backing up several SAN
volumes in the enterprise. The TSM FastBack Server needs to be uninstalled. While
uninstalling TSM FastBack, how are the SAN volumes protected from corruption?
A. Disable and disconnect the SAN volumes after uninstalling the TSM FastBack Server
with the uninstall wizard, then reboot.
B. Disable and disconnect the SAN volumes before uninstalling the TSM FastBack
Server with the uninstall wizard, then reboot.
C. Disable and disconnect the SAN volumes after uninstalling the TSM FastBack Server
with Add/Remove Programs, then reboot.
D. Disable and disconnect the SAN volumes before uninstalling the TSM FastBack
Server with Add/Remove Programs, then reboot.
Answer: C
QUESTION NO: 33
When using the Windows Event Viewer to troubleshoot aborted snapshots, which group
of events should be reviewed?
A. System
B. Security
C. Services
D. Application
Answer: D
QUESTION NO: 34
The IBM Tivoli Storage Manager FastBack server has started and the following message
appears: FSBG1316W FastBack server is running in limited mode. What is the first step
to solve the problem?
Answer: C
QUESTION NO: 35
A customer would like to enable IBM Tivoli Storage Manager FastBack Continuous Data
Protection (CDP) for a job schedule, in order to meet an aggressive Recovery Point
Objective in their newly updated service level agreement. Later the same day, the
customer needs to perform a restore of data that changed since the last snapshot, but it
appears that CDP is not working, and the granular level of detail is not available. What
are the two actions needed to get CDP started? (Choose two.)
Answer: A, E
QUESTION NO: 36
The IBM Tivoli Storage Manager FastBack (TSM FastBack) Client has failed. For the
troubleshooting procedure the TSM FastBack Client application log must be checked.
What is the correct log path location?
A. %Program Files%\Tivoli\TSM\FastBack\client\logs
B. %Program Files%\IBM\Tivoli\TSM\FastBack\client\logs
C. %Documents and Settings%\All Users\Application Data\TSM\FastBack\client\logs
D. %Documents and Settings%\All Users\Application Data\Tivoli\TSM\FastBack\client
Answer: D
QUESTION NO: 37
Which server must the Central Control Station be installed on in order to have a central
location for monitoring replicated snapshots and events?
A. any IBM Tivoli Storage Manager FastBack Manager server without an instance of
Exchange
B. any server with network access to the target IBM Tivoli Storage Manager FastBack
Managers
C. each remote IBM Tivoli Storage Manager FastBack Manager and at least one
repository server
D. any IBM Tivoli Storage Manager FastBack Manager server without IBM Tivoli
Storage Manager FastBack Mount installed
Answer: B
QUESTION NO: 38
Which three modules are installed if Backup Client is selected as the installation type?
(Choose three.)
Answer: A, B, F
QUESTION NO: 39
To perform an instant restore with IBM Tivoli Storage Manager FastBack (TSM
FastBack), which server component must be installed on each client system?
Answer: A
QUESTION NO: 40
In which order does the IBM Tivoli Storage Manager FastBack (TSM FastBack)
Administrative Client need to be installed?
Answer: D
QUESTION NO: 41
After configuring the ListenPath on the IBM Tivoli Storage Manager FastBack (TSM
FastBack) Disaster Recovery (DR) Hub server, what must be restarted?
Answer: C
QUESTION NO: 42
What is the default location where components are installed on a typical IBM Tivoli
Storage Manager FastBack Server installation?
A. %Program Files%\IBM\TSM\FastBack
B. %Program Files%\Tivoli\TSM\FastBack
C. %Program Files%\Tivoli\IBM\FastBack\Server
D. %Program Files%\Tivoli\TSM\Server\FastBack
Answer: B
QUESTION NO: 43
In planning an IBM Tivoli Storage Manager FastBack (TSM FastBack) environment,
clients are grouped in accordance with project requirements. When planning the client
groups, which maximum limit per TSM FastBack server needs to be considered?
A. 25 servers or 2 TB of data
B. 40 servers or 4 TB of data
C. 50 servers or 5 TB of data
D. 75 servers or 7 TB of data
Answer: B
QUESTION NO: 44
A potential customer has a database application which runs on Windows 2003. They have
Microsoft Volume Shadow Copy Service (VSS) running in their environment. What
needs to be done to ensure that the database application can be protected by IBM Tivoli
Storage Manager FastBack?
Answer: D
QUESTION NO: 45
What are the four pieces of information required to complete the text fields of the
Disaster Recovery (DR) Configuration tab in the IBM Tivoli Storage Manager FastBack
(TSM FastBack) Manager?
A. the TSM FastBack Administrator ID, the TSM FastBack Administrator password, the
TSM FastBack Server ID, and the DR Hub IP address
B. DR Hub Server Name or IP address, the branch DR user ID, the branch DR user
password, and the TSM FastBack branch server IP address
C. DR Hub Server Name or IP address, the branch DR user ID, the branch DR user
password, and the name associated with the TSM FastBack branch
D. the Active Directory (AD) Server name of the TSM FastBack Server, the AD Name
for the TSM FastBack administrator, the DR branch user ID, and the branch DR user
password
Answer: C
QUESTION NO: 46
When configuring integration with Tivoli Storage Manager (TSM) in a production
environment, which statement is valid?
Answer: C
QUESTION NO: 47
When configuring integration between IBM Tivoli Storage Manager FastBack (TSM
FastBack) and IBM Tivoli Storage Manager (TSM), which two statements are valid?
(Choose two.)
Answer: A, D
QUESTION NO: 48
A customer has 12 remote office locations. The server "SOUTH_A", IP address
10.12.1.34, is located at the main South branch office that consolidates data from all three
South region sites. The server "CENTRAL_A", IP address 10.12.1.30, is the server
located at the Central office, and it has connection to the IBM Tivoli Storage Manager
server. The customer wants to set up the IBM Tivoli Storage Manager FastBack Hub
Server at "CENTRAL_A" server. What is one of the steps that the administrator should
perform?
Answer: B
QUESTION NO: 49
A user launches IBM Tivoli Storage Manager FastBack (TSM FastBack) Mount on the
TSM FastBack Server, and the repository has been located and is displayed as
FASTBACK@TIVOLI.
The user has logged in to TSM FastBack server with the TSM FastBack user ID that the
administrator created for them. All the available snapshots are showing. The user selects
one of the snapshots to mount, and clicks the Mount button, but the mount fails. What is
the most likely reason?
A. The TSM FastBack administrator did not authorize the user to mount the snapshots for
the policy selected.
B. The TSM FastBack administrator did not authorize the user to mount the snapshots for
the server selected.
C. The TSM FastBack administrator did not authorize the user to mount the snapshots for
the volume selected.
D. The TSM FastBack administrator only authorized the user to use TSM FastBack
Manager but not TSM FastBack Mount.
Answer: B
QUESTION NO: 50
What does IBM Tivoli Storage Manager FastBack (TSM FastBack) use Cleanup for?
Answer: D
QUESTION NO: 51
When enabling Microsoft Data Execution Prevention for all programs and services,
which IBM Tivoli Storage Manager FastBack (TSM FastBack) application(s) need to be
listed as exception(s)?
QUESTION NO: 52
To create an IBM Tivoli Storage Manager FastBack (TSM FastBack) for Bare Machine
Recovery
(BMR) Recovery CD image, the BuildTSMFastBackBMRCD.bat script is run. Where is
the script located?
Answer: C
QUESTION NO: 53
When restoring an image to a target system that does not match the source system, the
CD image with storage drivers which are suitable for the target system must be
customized.
Which folder will be created to copy all the downloaded drivers to the IBM Tivoli
Storage Manager FastBack Bare Machine Recovery folder?
A. TargetSystemDrivers
B. SourceSystem Drivers
C. DissimilarStorageDrivers
D. DesignatedStorageDrivers
Answer: C
QUESTION NO: 54
What must be used to remove a disk that contains data from the repository?
A. repository cleanup
B. snapshot relocation
C. data relocation process
D. database volume removal
Answer: B
QUESTION NO: 55
A user launches IBM Tivoli Storage Manager FastBack (TSM FastBack) Mount on the
TSM FastBack Server, and the repository has been located and is displayed as
FASTBACK@TIVOLI. All the available snapshots are showing. The TSM FastBack
server has not been configured to authenticate with any Active Directory groups, and no
additional user IDs were created when the TSM FastBack server was set up. The user has
logged on to the Windows server with their personal user ID; they are not a member of
the Windows Administrators group. The Login as dialog shows FASTBACK\user. The
user selects one of the snapshots to mount, and clicks the Mount button, but the mount
fails. What is the most likely reason?
A. Only domain administrators can use mount.
B. The user forgot to click the Login as button, and log in with admin and admin's
password in the FASTBACK domain.
C. The user forgot to click the Login as button, and log in with admin and admin's
password in the XPRESS-RESTORE domain.
D. The user forgot to click the Login as button, and log in with Administrator and
Administrator's password in the FASTBACK domain.
Answer: C
QUESTION NO: 56
Which three items can be recovered by IBM Tivoli Storage Manager FastBack for
Exchange? (Choose three.)
A. Contacts
B. Public folders
C. Private folders
D. Calendar items
E. Chat messages
F. Mail attachments
Answer: C, D, F
QUESTION NO: 57
What must be ensured before performing a full Exchange Server database restore?
Answer: A
QUESTION NO: 58
What is the first step to perform a dissimilar bare machine recovery (BMR)?
A. Identify the necessary network drivers and storage drivers for the target hardware.
B. IBM Tivoli Storage Manager FastBack does not support dissimilar BMRs.
C. Ensure that the target dissimilar hardware system has access to the Internet for driver
downloads.
D. Ensure that the target dissimilar hardware system has more real memory than the
source hardware.
Answer: A
QUESTION NO: 59
An IBM Tivoli Storage Manager FastBack (TSM FastBack) protected server
(\\Server_27.mycompany.com, 192.168.0.20) has suffered a hardware failure of the
primary operating system drive. A similar replacement drive is found and installed. A
Bare Machine Recovery CD had been created and tested on this server prior to the
failure. The TSM FastBack server is named Austin_FB and has an IP address of
192.168.0.55. Now it is time to start the restore of the system OS drive. After the CD
mounts and proper IP and DNS addresses are entered, which two options are considered
correct syntax to attach to the TSM FastBack repository? (Choose two.)
A. \\192.168.0.20\$E
B. \\Server_27\repository
C. \\Austin_FB\FB_REP_E
D. \\192.168.0.55\FB_REP_E
E. \\Austin_FB\Drive_E\repository
Answer: C, D
QUESTION NO: 60
Which fields should be completed to allow a snapshot mounting operation using the IBM
Tivoli Storage Manager FastBack Mount to perform a restore?
A. Repository name, Server, Volume and date and time of the snapshot
B. Repository name, Policy, Client Group, and date and time of the snapshot
C. Repository name, Policy, Server, Volume and date and time of the snapshot
D. Repository name, Policy, Client Group, Server, Source Volume, Target Volume and
date and time of the snapshot
Answer: C
QUESTION NO: 61
Which event will cause the periodic e-mail notification to alert recipients about possible
system errors?
Answer: B
QUESTION NO: 62
An IBM Tivoli Storage Manager FastBack (TSM FastBack) client has Lotus Domino
installed. Can this application be backed up with TSM FastBack and successfully
restored?
Answer: C
QUESTION NO: 63
Which statement is true when restoring a Microsoft Exchange message?
A. The message is restored; however any attachments are lost.
B. The target mailbox is locked during the entire duration of the message restore.
C. Restoration of a single message is not supported by IBM Tivoli Storage Manager
FastBack for Microsoft Exchange.
D. The IBM Tivoli Storage Manager FastBack for Microsoft Exchange operator is able to
view the content of the message.
Answer: D
QUESTION NO: 64
Which three components will verify a successful backup of a Volume Shadow Copy
Service capable IBM Tivoli Storage Manager FastBack client? (Choose three.)
A. Writer
B. Volume
C. Shadow
D. Provider
E. Snapshot
F. Requestor
Answer: A, D, F
QUESTION NO: 65
A customer will only protect the operating system and application drives with IBM Tivoli
Storage Manager FastBack (TSM FastBack) as the rest of their data will be protected
with the IBM Tivoli Storage Manager Backup Archive Client. How is the size needed for
the repository determined?
Answer: C
QUESTION NO: 66
What happens if a disk is removed from the IBM Tivoli Storage Manager FastBack (TSM
FastBack) repository when there is insufficient space on other disks?
A. A disk cannot be removed from the repository once it has been used.
B. The removal task will fail with a lack of disk space error when the other repository
disks fill.
C. The TSM FastBack server will automatically delete the oldest backups, making space
available on other repository disks.
D. The TSM FastBack server will continue to run as normal, because backups stored on
the removed disk are only deleted when they expire.
Answer: B
QUESTION NO: 67
When using IBM Tivoli Storage Manager FastBack to restore Microsoft Exchange data,
which types of messages can be restored using Simple Mail Transfer Protocol (SMTP)?
A. e-mail messages
B. contact types and calendar entries
C. e-mail messages and calendar entries
D. e-mail messages, calendar entries, and contact types
Answer: A
QUESTION NO: 68
Which functionality does IBM Tivoli Storage Manager FastBack (TSM FastBack) Mount
provide?
Answer: B
QUESTION NO: 69
When attempting a File Level restore, which three network protocol items must be
available on the IBM Tivoli Storage Manager FastBack client? (Choose three.)
A. IPX/SPX
B. Active Directory
C. Simple File sharing
D. File and printer sharing
E. Internet Protocol (TCP/IP)
F. Client for Microsoft Networks
Answer: D, E, F
QUESTION NO: 70
The Snapshots Monitor view in the IBM Tivoli Storage Manager FastBack Manager is
used to display the status of which processes?
Answer: B
QUESTION NO: 71
A company has an IBM Tivoli Storage Manager Fastback snapshot mounted as a virtual
volume in read/write mode on a file server. When are the next changes applied to a file or
folder on that virtual volume?
Answer: B
QUESTION NO: 72
Scheduled data replication operations are not functioning properly. What is a valid
troubleshooting step?
A. Perform a local replication to rule out a time zone conflict with the remote DR Hub
Server.
B. Use TSM FastBack Mount to schedule a near-term replication operation, then attempt
to mount the replicated volume.
C. Use IBM Tivoli Storage Manager Fastback (TSM FastBack) Shell to query the
Disaster Recovery (DR) Hub Server log file.
D. Test the FTP configuration using the appropriate operation on the DR Configuration
tab of the TSM FastBack Manager interface.
Answer: D
QUESTION NO: 73
A disaster has occurred at a customer site, and it is discovered that the IBM Tivoli
Storage Manager FastBack (TSM FastBack) server is corrupted. After rebuilding and
restoring the TSM FastBack server, which action must be taken to gain access to the
repository to begin restoring data to clients?
Answer: B
QUESTION NO: 74
The IBM Tivoli Storage Manager FastBack (TSM FastBack) repository is at 85% and
growing daily. A service window is not available where the TSM FastBack server can be
taken down to add additional hardware. More repository space is needed until additional
hardware can be installed. How can more space be added to the repository?
A. Open a command window and run cln-rep.exe to remove any files older than 180
days.
B. Use the TSM FastBack Migrate to Tape command to move all data older than 90 days
off to tape.
C. Use the TSM FastBack Analyze File Aging tool to locate files and data which should
be removed from the repository after they have expired.
D. Create a folder on a drive that is not being protected by TSM FastBack. Make this
folder part of the repository using Add repository space from the Repository pool.
Answer: D
QUESTION NO: 75
Since the enterprise replicates snapshots to a Disaster Recovery server every hour, there
is heavy WAN traffic. Due to the low bandwidth available for cleanup, cleanup should
wait to run only when an entire snapshot can be removed. Which level of cleanup
configuration should be selected?
A. Low
B. High
C. Minimal
D. Maximal
Answer: C
QUESTION NO: 76
Running a tape backup every night at the same time would mean that data is protected but
there would be a full day's worth of data which might not be protected depending on the
backup strategy. Assuming the last backup was successful, all the data that was created or
edited since the last backup was run could be lost if a disaster occurred. What would the
Recovery Point Objective be in this scenario?
A. 8 hours
B. 24 hours
C. 7.24 hours
D. There is no Recovery Point Objective
Answer: B
QUESTION NO: 77
When using the IBM Tivoli Storage Manager FastBack (TSM FastBack) for Bare
Machine Recovery CD, which role can perform a restore operation in a non-Active
Directory environment?
A. TSM Administrators
B. Domain Administrators
C. TSM Fastback Administrators
D. Operating System Administrators
Answer: C
QUESTION NO: 78
Why should machines on which IBM Tivoli Storage Manager FastBack for Bare Machine
Recovery was performed never be left unmonitored?
Answer: A
QUESTION NO: 79
A server has two internal disks, and each disk is 73 GB in size. The first disk is
partitioned into 30 GB for the operating system, and has an unused partition of 43 GB.
The second disk has not been used by IBM Tivoli Storage Manager FastBack as a disk
repository. Can the second disk be added to the repository as an additional disk
repository?
A. No.
B. Yes.
C. Only if the second disk is IDE.
D. Only if the second disk is at logical unit number 1.
Answer: B
QUESTION NO: 80
An enterprise maintains a high number of generations of snapshots, which uses a lot of
storage space. While there are concerns about recovering the space from unnecessary
generations of snapshots, the bandwidth required during the cleanup process is the
primary concern. Which level of cleanup configuration needs to be selected?
A. Low
B. High
C. Minimal
D. Maximal
Answer: A
QUESTION NO: 81
Which step should be taken to troubleshoot an existing installation of IBM Tivoli Storage
Manager FastBack (TSM FastBack) Mount/Instant Restore?
Answer: D
QUESTION NO: 82
The enterprise uses SAN volumes for the repository. The IBM Tivoli Storage Manager
FastBack (TSM FastBack) Server is being uninstalled. How can the repository on the
SAN volumes be protected from corruption during this process?
A. Use the TSM FastBack Manager to disable access to all production SAN volumes
before rebooting.
B. Use logical unit number (LUN) masking to disconnect the TSM FastBack Server from
the Fiber Channel before rebooting.
C. Use LUN masking to disable access to all production SAN volumes and disconnect
the system from the Fiber Channel before rebooting.
D. Use the TSM FastBack Manager to disable access to all production SAN volumes and
disconnect the system from the Fiber Channel before rebooting.
Answer: C
QUESTION NO: 83
A script written for the IBM Tivoli Storage Manager FastBack (TSM FastBack)
Administrative
Command Line does not seem to be working. When it fails, it is not obvious if the script
has errors or if the command-line interface is not working. What helps diagnose the
issue?
A. Compile the script into an executable and run it as a service instead of a script.
B. Uninstall the TSM FastBack command-line client and reinstall all component parts.
C. Attach a network sniffer to verify there is data traffic between the command host and
the shell client.
D. Open a command window and from the shell directory run various commands to
verify communication to the server.
Answer: D
QUESTION NO: 84
A company has been running IBM Tivoli Storage Manager FastBack (TSM FastBack)
Hub Server and the other TSM FastBack Servers without issue for the past six months.
The administrators noticed that the Hub Server is running out of disk space. They want to
allocate additional disk resources for snapshot replication on the Hub Server. Which three
types of disk resources can be used? (Choose three.)
A. WORM
B. SAN disk
C. NAS disk
D. DASD disk
E. SEQUENTIAL
F. IDE FAT32 disk
Answer: B, C, D
QUESTION NO: 85
While reviewing the Snapshots Monitor tab, several snapshots have been aborted. Which
two troubleshooting steps are valid investigation methods? (Choose two.)
A. Review the IBM Tivoli Storage Manager FastBack Server log files.
B. Check the FastBackDRHubServer.ini for errors in the ListenPath1 or FTPRootPath1
fields.
C. Verify that the IBM Tivoli Storage Manager FastBack Mount/Instant Restore service is
running.
D. Test the FTP configuration to ensure that communication with the Disaster Recovery
Hub Server is functioning correctly.
E. Use the Windows Event Viewer on the IBM Tivoli Storage Manager FastBack Server
to review events near the same time that the snapshot aborted.
Answer: A, E
QUESTION NO: 86
An IBM Tivoli Storage Manager FastBack (TSM FastBack) server is located in the UK.
Daylight savings has caused the server clock to change. What needs to be done to ensure
correct operation of further snapshots?
Answer: D
QUESTION NO: 87
Three servers ( A, B, and C) need data backed up.
Server A has 200 GB of data with an expected 10% daily change rate
Server B has 600 GB of data with an expected 5% daily change rate
Server C has 440 GB of data with an expected 15% daily change rate
What is the expected number of hours to transmit the data from the IBM Tivoli Storage
Manager FastBack server to its repository using a 1 Gbps link?
A. 0.5 hours
B. 5.0 hours
C. 5.5 hours
D. 4.5 hours
Answer: A
QUESTION NO: 88
Where is the log information for IBM Tivoli Storage Manager FastBack (TSM FastBack)
Hub Server located?
A. In C:\Program Files\Tivoli\TSM\FastBack\drhub\logs
B. In the FastBack Manager, under FastBack DR Log tab
C. In the logs directory under the Disaster Recovery repository
D. In C:\Documents and Settings\All Users\Application
Data\Tivoli\TSM\FastBack\drhublog
Answer: C
QUESTION NO: 89
The installation is faced with some errors on the IBM Tivoli Storage Manager FastBack
(TSM FastBack) Servers. Errors were found with the repository access listed on the
Snapshot Monitor. What is the next step?
Answer: B
QUESTION NO: 90
An IBM Tivoli Storage Manager FastBack (TSM FastBack) protected server cannot be
seen in the TSM FastBack System Manager. There is no reference to the server name or
any of the drive resources of that server. Which option is the best first step to help isolate
the problem?
A. Uninstall the TSM FastBack client, reboot the client server and reinstall the TSM
FastBack client again.
B. Reboot the TSM FastBack Server and see if the reboot will allow the server to
communicate with the TSM FastBack client.
C. Check the installation log file %Temp%\FastBackInstallation.log to verify a successful
installation of the TSM FastBack client.
D. Put the protected server on a network sniffer and watch the packet information for the
IP address of the TSM FastBack Server.
Answer: C
QUESTION NO: 91
If the IBM Tivoli Storage Manager FastBack (TSM FastBack) Central Control Station
(CCS) is not running, which simple test could be performed to check its functionality?
A. Run CCSTest.exe
B. Locate and run ccstation.exe
C. Run system diagnostics to confirm functionality
D. Check that the TSM FastBack CCS Service is running
Answer: B
QUESTION NO: 92
An incremental backup policy configured to protect the data disk of a Microsoft SQL
server runs once every 2 hours. This policy is configured with 48 generations, and the
first full backup was done on Sunday to the server. On Monday, Tuesday, and Wednesday,
the incremental backup total size resulted in a backup of 50 MB for each snapshot. On
Thursday the 2 a.m. backup was noted to be 4 GB by the IBM Tivoli Storage Manager
FastBack (TSM FastBack) Status Monitor, and was still a backup type of Incremental.
Assuming that no software was installed or removed on the server, and that there was not
any change in usage patterns by users on Thursday, what is the likely cause of the
increased backup?
Answer: C
QUESTION NO: 93
How are the snapshot events viewed?
A. In the IBM Tivoli Storage Manager FastBack (TSM FastBack) Manager interface,
select the TSM FastBack Status tab
B. In the IBM Tivoli Storage Manager FastBack (TSM FastBack) Manager interface,
select the TSM FastBack Server Log
C. In the IBM Tivoli Storage Manager FastBack (TSM FastBack) Manager interface,
expand the Reports menu item, and then select Events
D. In the IBM Tivoli Storage Manager FastBack (TSM FastBack) Manager interface , in
the Snapshots Monitor tab, right-click a snapshot and select Events
Answer: D
QUESTION NO: 94
Given a data server with 600 GB of data with a 10% daily change rate, what is the
expected maximum daily data delta that must be transmitted after the first backup has
completed?
A. 60 GB
B. 90 GB
C. 1.2 TB
D. 180 GB
Answer: A
QUESTION NO: 95
After clients are grouped, the backup schedules for the volumes to be backed up must be
determined. Finally, the client groups must be linked to the scheduled jobs. How are
client groups linked to a scheduled job?
A. Backup wizard
B. Client Configurator
C. Scheduling wizard
D. Policy configuration
Answer: D
QUESTION NO: 96
Three servers ( A, B, and C) need data backed up.
Server A has 200 GB of data with an expected 10% daily change rate
Server B has 600 GB of data with an expected 5% daily change rate
Server C has 440 GB of data with an expected 15% daily change rate
What is the expected number of hours to transmit the data from the IBM Tivoli Storage
Manager FastBack server to its repository using a 1 Gbps link?
A. 0.5 hours
B. 5.0 hours
C. 5.5 hours
D. 4.5 hours
Answer: A
QUESTION NO: 97
What is the recommended maximum number of IBM Tivoli Storage Manager FastBack
(TSM FastBack) clients that can connect to a single TSM FastBack server?
A. 20
B. 35
C. 40
D. 50
Answer: C
QUESTION NO: 98
What are three benefits of taking a block-level snapshot? (Choose three.)
Answer: A, C, D
QUESTION NO: 99
Which process should be used cautiously as it will add quickly to the size of the IBM
Tivoli Storage Manager FastBack (TSM FastBack) repository?
Answer: C
Answer: A, E
Answer: A, C
A. TSM FastBack repository sizing best practice is based on the average daily change
rate and is simple multiplication.
B. TSM FastBack repository sizing best practice recommends a repository that is 3 to 5
times of the backup source volumes.
C. TSM FastBack repository sizing best practice recommends a repository that is 1% to
5% larger than the backup source volumes.
D. TSM FastBack repository sizing best practice recommends a local repository that is
1.5 times of the backup target volumes and a secondary remote repository of same size.
Answer: B
A. Image Backup
B. Application quiescing
C. Central Control Station
D. Continuous Data Protection
Answer: D
A. 1-5 TB
B. 500 GB
C. 10-15 TB
D. 15-20 TB
Answer: D
A. TSM FastBack for Databases enables the Instant Restore feature for Microsoft SQL
databases.
B. Although TSM FastBack is disk-disk based, it can send data to tape by using
integration with IBM Tivoli Storage Manager client.
C. TSM FastBack can be integrated to support IBM Tivoli Continuous Data Protection
for Files to enable continuous data protection snapshot.
D. TSM FastBack for Microsoft Exchange includes a GUI to view the contents of any
Microsoft Exchange database and allows only mailbox level restore.
Answer: B
Answer: C
A. The IBM Tivoli Storage Manager FastBack server can use one of the current backups
and make a copy to tape media. The customer can then take this media off-site.
B. IBM Tivoli Storage Manager FastBack can replicate its backups off-site using the
FastBack Disaster Recovery (DR) Hub server, and the FastBack DR Hub server can store
the backups on tape.
C. The IBM Tivoli Storage Manager FastBack server can use its policy to take an
additional backup to be used for off-site, and store this additional copy on tape media.
The customer can then take this media off-site.
D. IBM Tivoli Storage Manager FastBack will need to be integrated with another
application to achieve a tape copy. The procedure for storing the tapes off-site will be
governed by the capability of the application used.
Answer: D
Answer: B
QUESTION NO: 109
What is the recommended maximum number of IBM Tivoli Storage Manager FastBack
(TSM FastBack) clients that can connect to a single TSM FastBack server?
A. 20
B. 35
C. 40
D. 50
Answer: C
Answer: C
Answer: A, B
A. DRServer.file
B. ListenPath1.opt
C. FastBackDRServer.ini
D. FastBackDRServer.opt
Answer: C
A. %Program Files%\IBM\TSM\FastBack
B. %Program Files%\Tivoli\TSM\FastBack
C. %Program Files%\Tivoli\IBM\FastBack\Server
D. %Program Files%\Tivoli\TSM\Server\FastBack
Answer: B
Answer: A
A. Use the TSM FastBack Client Configurator to specify the IP address of the TSM
Client
B. Edit the FastBackShell.ini file and manually configure the IP address for the TSM
Client
C. Edit the FastBackShell.ini file and manually configure the IP address for the TSM
server
D. Uninstall the TSM FastBack Mount module, edit the FastBackShell.ini file, then
reinstall the TSM FastBack Mount module
Answer: B
A. The Windows ACLs are prohibiting them from accessing any files or directories.
B. Only TSM FastBack administrators can access files from a TSM FastBack Mount.
C. The TSM FastBack administrator did not authorize the user to access snapshots for the
server selected
D. The TSM FastBack administrator did not authorize the user to mount the snapshots for
the policy selected.
Answer: A
A. HBA cards
B. Display drivers
C. Storage drivers
D. Network drivers
E. Network adaptor cards
Answer: C, D
A. The TSM FastBack server must be a part of the domain DOMAIN, before users from
that domain can connect to it.
B. The user forgot to supply a user name and password for a Windows user when
connecting to the remote repository.
C. The user forgot to click the Login as button, and log in with admin and admin's
password in the XPRESS-RESTORE domain.
D. The user forgot to click the Login as button, and log in with Administrator and
Administrator's password in the DOMAIN domain.
Answer: B
Answer: D
A. 18 TB
B. 1.8 TB
C. 5.4 TB to 9 TB
D. 1.8 TB to 3.6 TB
Answer: C
Answer: A, B
Answer: D
Answer: B
A. C:\Program Files\Tivoli\TSM\FastBack\drhub\FastBackServer.cfg
B. C:\Program Files\Tivoli\TSM\FastBack\drhub\FastBackFTPHomeDir.ini
C. C:\Program Files\Tivoli\TSM\FastBack\drhub\FastBackDRHubServer.ini
D. C:\Program Files\Tivoli\TSM\FastBack\drhub\FastBackDRHubServer.cfg
Answer: C
Answer: A
A. Create repository
B. Define users and groups
C. Define disk cleanup policy
D. Define repository alert levels
Answer: A
Answer: C
Answer: B
A. NAS
B. RAW
C. CIFS
D. NTFS
Answer: D
Which two steps must be taken before attempting Individual Mail Restore to restore
Microsoft Exchange data? (Choose two.)
A. Reboot the Microsoft Exchange server
B. Place the Microsoft Exchange server in backup mode
C. Launch IBM Tivoli Storage Manager FastBack for Microsoft Exchange
D. Place the IBM Tivoli Storage FastBack Manager for the Exchange server in restore
mode
E. Use IBM Tivoli Storage Manager FastBack Mount to mount the volumes(s) containing
the Exchange data
Answer: C, E