You are on page 1of 18

0066300-000-02-20Y

2.1 Product model

2.1.1 Product name plate and its position

2.1.1.1 Product name plate

2-2
0066300-000-02-20Y

Note:
Please present the information involved in the name plate if you need our service.

2.1.1.2 Position of product name plate

The product name plate is installed on the left side of operator‘s cab.

Traveling direction

2-3
0066300-000-02-20Y

2.1.2 Engine type and its manufacturer

WD615.58,Weichai Power Co.,Ltd.


WP10.240,Weichai Power Co.,Ltd.
QSB6.7-C205,America Cummins

2.2 Terminology

2.2.1 Boom configuration

S SF
Instructions for boom configuration
Configuration
Description Parameters
No.
S Main boom S = 12 - 57m

SF Main boom with fixed jib S = 30 - 42m F = 6 - 18m

2-4
0066300-000-02-20Y

2.3.3 Overall dimensions (unit: mm)

2 - 10
0066300-000-02-20Y

2.4 Technical data

2.4.1 Main technical parameter

Item Unit Value Remarks


Max. lifting capacity × radius t×m 70×3.8
Deadweight with basic boom t 61
Main boom length m 12 - 57
Fixed jib length m 6 - 18
Max. lifting capacity on fixed jib t 6.4
Offset angle of fixed jib ° 10,30
Max. length of main boom with fixed jib m 42+18
The 4th rope
Hoisting winch 1 m/min 120
layer
Max. single
The 4th rope
rope speed Hoisting winch 2 m/min 120
layer
of winches
The 4th rope
Derricking winch m/min 45
layer
Slewing speed rpm 0 - 2.4
Traveling speed km/h 0 - 1.35
Gradeability % 30
Ground pressure MPa 0.074
With A-frame
and main
Overall dimensions (L×W×H) m 12.4×3.3×3.2
boom pivot
section
Rated
power/rotational kW/r/min 175/2200
speed
Weichai

Max. output
torque/rotational Nm/ r/min 1000/1400 - 1600
speed
Engine exhaust
EU StageⅡ or EU Stage III
emission limits
Engine
Rated
power/rotational kW/r/min 153/1800
speed
Cummins

Max. output
torque/rotational Nm/r/min 929/1300
speed
Engine exhaust
TIER 3
emission limits
4000×5150×760(crawler
Distance between track center × carrier extended)
mm
crawler contact length × crawler width 2540×5150×760(crawler
carrier retracted)

2 - 11
0066300-000-02-20Y

2.4.2 Type of load hook and selection of rope reeving

Lifting capacity Maximum rope reeving Weight of load hook (kg)


70t 12 760
30t 5 380
6t 1 181

Note:
The specification of load hook in above table is not the standard load hook configuration. It is
subject to the contract signed with customer.

2.4.3 Rope reeving and specification of wire rope

2.4.3.1 Rope reeving for different boom lengths

Main boom length


Rated lifting capacity (t) Rope reeving
(m)
12 70 12
15 65 12
18 58.2 10
21 51.2 8
24 44.2 8
27 37 6
Crane
operation 30 34 6
with main 33 30.4 6
boom 36 27.1 4
39 24.3 4
42 21.9 4
45 19.9 3
48 18.1 3
51 14.6 3
54 14.6 3
57 13.7 3
Crane
operation
with main 6 - 18 6.4 1
boom and
fixed jib

Note:
If crane is working with hoisting rope reeving less than the value listed in the above table,
single hoisting rope load must be checked to make sure that the Max. permissible load
capacity of single hoisting rope is not exceeded.

2 - 12
0066300-000-02-20Y

2.4.3.2 Specification of wire rope


Description and Hoisting rope for Hoisting rope for winch
Derricking rope
intended use winch1 2
Torsion-resistance or
Yes Yes No
not
Type of rope 35*7IWS-1960 35*7IWS-1960 6T(29)+7*7-20-1910

Norminal rope diameter 20mm 20mm 20mm

Rope length 240m 160m 120m

Minimum breaking load 304KN 304KN 290KN


Left-hand ordinary
Direction and type of lay Left-hand ordinary lay Right-hand lang lay
lay
Tensile strength of wire 1960N/mm2 1960N/mm2 1910N/mm2

2.4.3.3 Use length of hoisting rope and derricking rope

In transport condition, the longest length of derricking rope is about 115m.


Crane operation with main boom: when main boom length is 57m and rope reeving is 3, the
longest possible hoisting rope for winch 1 is 234m.
Crane operation with main boom and fixed jib: when main boom length is 42m and fixed jib
length is 18m, the longest possible hoisting rope for winch 2 is 120m.
Note: The edge of winding drum should be 13mm higher than the outermost rope layer. As to
dimensions of winding drum of QUY70 crawler crane, please see following diagram:

Distance between the


edge of winding drum
and outermost rope
Hoisting rope Winding drum layer

2 - 13
0066300-000-02-20Y

2.4.4 Lifting height

Note:
The main boom lifting height curve is drawn without considering boom deflection.

2.4.4.1 Lifting height on S boom


Lifting height (m)

Working radius (m)

Note:
(1) The horizontal direction indicates working radius (in m) and the vertical direction indicates
lifting height (in m).
(2) For S boom configuration, S = 12m – 57m.

2 - 14
0066300-000-02-20Y

2.4.4.2 Lifting height on SF boom


Lifting height (m)

Working radius (m)


Note:
(1) The offset angle of fixed jib is 10°.
(2) The horizontal direction indicates working radius (in m) and the vertical direction indicates
lifting height (in m).
(3) For SF boom configuration, S = 30m – 42m, F = 6m – 18m.

2 - 15
0066300-000-02-20Y
Lifting height (m)

Working radius (m)

Note:
(1) The offset angle of fixed jib is 30°.
(2) The horizontal direction indicates working radius (in m) and the vertical direction indicates
lifting height (in m).
(3) For SF boom configuration, S = 30m – 42m, F = 6m – 18m.

2 - 16
0066300-000-02-20Y

2.4.5.2 Lifting capacity on SF boom

Unit:t

Main boom Main boom


30 33
length (m) length (m)
Fixed jib Fixed jib
6 12 18 6 12 18
length (m) length (m)
Offset angle of fixed jib (°)
Radius (m) 10 30 10 30 10 30 10 30 10 30 10 30 Radius (m)
8 6.4/8.3 6.4/8.8 8
10 6.4 6.4/10.1 6.4/10.3 6.4 10.6/6.4 6.4/10.8 10
12 6.4 6.4 6.4 13.9/6.4 5.0/12.4 6.4 6.4 6.4 4.9/12.9 12
14 6.4 6.4 6.4 6.4 4.8 6.4 6.4 6.4 14.4/6.4 4.9 14
16 6.4 6.4 6.4 6.4 4.8 17.8/4.5 6.4 6.4 6.4 6.4 4.8 16
18 6.4 6.4 6.4 6.4 4.7 4.5 6.4 6.4 6.4 6.4 4.8 18.3/4.4 18
20 6.4 6.4 6.4 6.4 4.6 4.3 6.4 6.4 6.4 6.4 4.6 4.3 20
22 6.4 6.4 6.4 6.4 4.5 4.3 6.3 6.3 6.4 6.4 4.5 4.3 22
24 5.6 5.6 5.9 5.9 4.5 4.3 5.5 5.5 5.6 5.8 4.5 4.3 24
26 4.9 4.9 5.2 5.2 4.4 4.2 4.8 4.8 5 5.1 4.5 4.2 26
28 4.4 4.4 4.6 4.6 4.4 4.2 4.3 4.3 4.4 4.5 4.4 4.2 28
30 3.9 3.9 4.1 4.1 4.2 4.2 3.8 3.8 3.9 4.0 4 4.2 30
32 3.5 3.5 3.7 3.7 3.6 3.9 3.4 3.4 3.5 3.6 3.6 3.8 32
34 3.3 3.3 3.4 3.5 3.0 3.0 3.2 3.2 3.3 3.4 34
36 3 3 3.1 3.1 2.6 2.6 2.9 2.9 2.9 3.0 36
38 2.6 2.6 2.8 2.8 2.5 2.5 2.6 2.7 38
40 2.5 2.5 2.3 2.3 2.4 2.4 40
42 2.3 2.3 2 2.0 2.2 2.2 42
44 2.0 2.0 1.9 1.9 44
46 1.7 1.7 46
48 1.5 1.5 48

2 - 19
0066300-000-02-20Y

Main boom Main boom


36 39
length (m) length (m)
Fixed jib Fixed jib
6 12 18 6 12 18 6 12 18
length (m) length (m)
Offset angle of fixed jib (°)
Radius (m) 10 30 10 30 10 30 10 30 10 30 10 30 Radius (m)
8 6.4/9.3 6.4/9.8 6.4/11.9 8
10 6.4 6.4/11.1 6.4/11.4 6.4 11.6/6.4 6.4 10
12 6.4 6.4 6.4 4.9/13.4 6.4 6.4 6.4 4.9/13.9 12
14 6.4 6.4 6.4 6.4/15 4.9 6.4 6.4 6.4 15.5/6.4 4.9 14
16 6.4 6.4 6.4 6.4 4.8 6.4 6.4 6.4 6.4 4.8 16
18 6.4 6.4 6.4 6.4 4.8 18.8/4.5 6.4 6.4 6.4 6.4 4.8 19.3/4.5 18
20 6.4 6.4 6.4 6.4 4.7 4.4 6.4 6.4 6.4 6.4 4.7 4.5 20
22 6.1 6.2 6.3 6.4 4.5 4.3 6 6.1 6.2 6.4 4.6 4.3 22
24 5.3 5.4 5.5 5.7 4.5 4.3 5.2 5.3 5.4 5.6 4.6 4.3 24
26 4.7 4.7 4.9 5.0 4.5 4.3 4.6 4.6 4.7 4.9 4.5 4.3 26
28 4.1 4.1 4.3 4.4 4.3 4.2 4 4.0 4.2 4.3 4.2 4.2 28
30 3.7 3.7 3.8 3.9 3.9 4.1 3.5 3.5 3.7 3.8 3.8 4.0 30
32 3.2 3.2 3.4 3.5 3.5 3.7 3.1 3.1 3.3 3.4 3.4 3.6 32
34 2.9 2.9 3 3.1 3.1 3.3 2.8 2.8 2.9 3.0 3 3.2 34
36 2.5 2.5 2.7 2.8 2.8 2.9 2.4 2.4 2.6 2.6 2.7 2.8 36
38 2.2 2.2 2.4 2.4 2.5 2.6 2.1 2.1 2.3 2.3 2.4 2.5 38
40 2.2 2.2 2.3 2.3 1.9 1.9 2.1 2.1 2.1 2.2 40
42 2 2 2 2.1 1.6 1.6 1.8 1.8 1.9 2.0 42
44 1.7 1.7 1.8 1.8 1.6 1.6 1.7 1.8 44
46 1.6 1.6 1.4 1.4 1.5 1.5 46
48 1.4 1.4 1.3 1.3 48
50 1.2 1.2 1.2 1.2 50
52 1 1.0 52
54 54

2-20
0066300-000-02-20Y

Main boom Main boom


42
length (m) length (m)
Fixed jib Fixed jib
6 12 18
length (m) length (m)
Offset angle of fixed jib (°)

Radius (m) 10 30 10 30 10 30 Radius (m)

10 6.4/10.3 10

12 6.4 12.2/6.4 6.4/12.4 12

14 6.4 6.4 6.4 4.9/14.4 14

16 6.4 6.4 6.4 6.4 4.9 16

18 6.4 6.4 6.4 6.4 4.8 19.9/4.5 18

20 6.4 6.4 6.4 6.4 4.7 4.5 20

22 5.9 6.1 6.1 6.3 4.7 4.3 22

24 5.1 5.2 5.3 5.5 4.6 4.3 24

26 4.4 4.5 4.6 4.8 4.6 4.3 26

28 3.9 4 4.1 4.2 4.2 4.3 28

30 3.4 3.4 3.6 3.7 3.7 3.9 30

32 3 3.0 3.2 3.3 3.3 3.3 32

34 2.6 2.6 2.8 2.9 2.9 3.1 34

36 2.3 2.3 2.5 2.5 2.6 2.7 36

38 2.1 2.0 2.2 2.2 2.3 2.4 38

40 1.8 1.8 1.9 2.0 2 2.1 40

42 1.5 1.5 1.7 1.7 1.8 1.9 42

44 1.3 1.3 1.5 1.5 1.6 1.7 44

46 1.3 1.3 1.4 1.4 46

48 1.1 1.1 1.2 1.2 48

50 1.1 1.1 50

52 0.9 0.9 52

54 0.8 0.8 54

2-21
0066300-000-02-20Y

Note:
(1) The values in above charts are applicable to 360°working range.
(2) The value in above charts is the rated total lifting capacity of crane, which is the maximum
permitted lifting capacity under various boom configurations. It includes the weight of load
hook and other load handling devices.

Rated lifting
Rated total lifting capacity =
capacity + (Weight of load hook and
(Actual load) other load handling devices)

(3) The radius in above charts is the horizontal distance from central axle of slewing ring to
centerline of load hook when crane is loaded.
(4) For SF boom configuration, if load hook 1 is not detached from main boom head, the
actual lifting capacity on fixed jib should be calculated from this formula: rated total lifting
capacity – load hook1‘s weight – load hook 2‘s weight – sling‘s weight – wire rope‘s
weight.
(5) For S boom configuration (but some sections of fixed jib are not dismantled), the actual
lifting capacity on main boom is calculated in accordance with following formula:

 L cos(   )   L2 
G2  G  G1 1  2   G3  G4  cos(   )  1
 2 L1  4 1
L 

Where, G= rated lifting capacity


G1= weight of fixed jib head and fixed jib pivot section + weight of 6m fixed jib
intermediate section ×(number of 6m fixed jib intermediate sections) +fixed jib anchoring
rods
G2= actual lifting capacity
G3= weight of FA-frame and tilting-back support of fixed jib
G4= weight of load hook 2 and other load handling devices
L1= main boom radius (or main boom length ×cosα)
L2= fixed jib length

2-22
0066300-000-02-20Y

α= main boom angle


β= offset angle of fixed jib (10° or 30°)

As for detailed lifting capacity, refer to lifting capacity table in Section 2.4.5.3.
(6) The rated lifting capacity indicates the crane‘s lifting capacity under different boom
configurations when it is operated on firm and flat ground.
(7) When tip boom is used, the lifting capacity on tip boom is the same as that on main boom
within the same radius, but is max. lifting capacity should not exceed 6.0t.
(8) Whether the main boom is attached with tip boom or not, the lifting capacity on main
boom is the same.
(9) Main boom and tip boom can not work at the same time when main boom is attached
with tip boom.]
(10) The maximum in-service wind velocity should not exceed 9.8m/s during crane operation;
The maximum out-of-service wind velocity should not exceed 21m/s when crane is only
fitted with main boom; The maximum out-of-service wind velocity should not exceed
15m/s when crane is fitted with main boom and fixed jib.
(11) For SF boom configuration, the maximum lifting capacity on fixed jib (6.4t) includes the
weight of load hook 2 (6t) and wire rope (0.4t). However, the maximum actual lifting
capacity should not exceed 6t.
(12) When crane is traveling with a load,
— 70% of rated lifting capacity under corresponding working condition should not be
exceeded;
— The boom should be located in the forward driving direction;
— The height of lifted load above the ground should not be more than 500mm.

2-23
0066300-000-02-20Y

2.4.5.3 Lifting capacity on S boom (but some sections of fixed jib are not dismantled)

The actual lifting capacities on main boom under such condition are shown is following chart.

Note:
The lifting capacity in charts is the rated lifting capacity, which includes the weight of load hook and other load handling devices. It is given in ―t‖.
The sign ―*/*‖ indicates ―lifting capacity/radius‖.
Unit:t
Main boom Main boom
30 33
length (m) length (m)
Fixed jib length Fixed jib length
6 12 18 6 12 18
(m) (m)
Offset angle of fixed jib (°)
Radius (m) 10 30 10 30 10 30 10 30 10 30 10 30 Radius (m)
8 23.3 23.1 22.8 22.5 22.3 21.8 22.8 22.6 22.3 22.0 21.8 21.3 8
9 19.9 19.8 19.4 19.2 18.9 18.5 19.5 19.4 19.0 18.8 18.5 18.1 9
10 17.2 17.1 16.7 16.5 16.2 15.8 16.9 16.8 16.4 16.2 16.0 15.6 10
12 13.3 13.2 12.8 12.7 12.4 12.1 13.1 13.0 12.7 12.5 12.2 11.9 12
14 10.5 10.4 10.1 9.9 9.6 9.4 10.4 10.3 10.0 9.8 9.5 9.3 14
16 8.5 8.4 8.1 8.0 7.6 7.4 8.4 8.3 8.0 7.9 7.5 7.3 16
19 6.4 6.3 6.0 5.9 5.5 5.4 6.3 6.2 5.9 5.8 5.5 5.3 19
20 5.8 5.7 5.4 5.3 4.9 4.8 5.7 5.6 5.3 5.2 4.9 4.7 20
22 4.9 4.8 4.5 4.4 4.1 4.0 4.8 4.7 4.4 4.3 4.0 3.9 22
24 4.2 4.1 3.8 3.7 3.4 3.3 4.0 3.9 3.6 3.5 3.2 3.1 24
26 3.5 3.4 3.1 3.0 2.7 2.6 3.4 3.3 3.0 2.9 2.6 2.5 26
28 2.9 2.8 2.5 2.4 2.1 2.0 28
29 2.6 2.5 2.2 2.1 1.8 1.7 29

2-24
0066300-000-02-20Y

Main boom Main boom


36 39
length (m) length (m)
Fixed jib length Fixed jib length
6 12 18 6 12 18
(m) (m)
Offset angle of fixed jib (°)
Radius (m) 10.0 30.0 10.0 30.0 10.0 30.0 10.0 30.0 10.0 30.0 10.0 30.0 Radius (m)
8 22.4 22.2 21.9 21.6 21.4 20.9 21.9 21.7 21.5 21.1 21.0 20.4 8
9 19.1 19.0 18.7 18.4 18.2 17.7 18.7 18.6 18.3 18.0 17.8 17.3 9
10 16.5 16.4 16.1 15.8 15.6 15.2 16.2 16.1 15.8 15.5 15.3 14.9 10
12 12.8 12.7 12.4 12.2 11.9 11.6 12.5 12.4 12.1 11.9 11.7 11.3 12
14 10.2 10.1 9.8 9.6 9.4 9.1 10.0 9.9 9.6 9.5 9.2 8.9 14
16 8.3 8.2 7.9 7.8 7.5 7.3 8.1 8.0 7.7 7.6 7.3 7.1 16
19 6.1 6.0 5.7 5.6 5.3 5.1 6.0 5.9 5.6 5.5 5.2 5.1 19
20 5.6 5.5 5.2 5.1 4.8 4.7 5.5 5.4 5.1 5.0 4.7 4.6 20
22 4.7 4.6 4.3 4.2 3.9 3.8 4.5 4.4 4.2 4.1 3.7 3.6 22
24 3.9 3.8 3.5 3.4 3.1 3.0 3.8 3.7 3.5 3.4 3.1 2.9 24
26 3.3 3.2 3.0 2.9 2.5 2.4 3.1 3.0 2.8 2.7 2.4 2.3 26
28 2.7 2.6 2.4 2.3 1.9 1.8 2.6 2.5 2.3 2.2 1.9 1.8 28
29 2.5 2.4 2.2 2.1 1.8 1.7 2.4 2.3 2.1 2.0 1.7 1.6 29
30 2.3 2.2 2.0 1.9 1.6 1.5 2.1 2.0 1.8 1.7 1.4 1.3 30
32 1.9 1.8 1.6 1.5 1.2 1.1 1.7 1.6 1.4 1.3 32
34 1.4 1.3 1.1 1.0 34

2-25
0066300-000-02-20Y

Main boom Main boom


42
length (m) length (m)
Fixed jib Fixed jib
6 12 18
length (m) length (m)
Offset angle of fixed jib (°)
Radius (m) 10 30 10 30 10 30 Radius (m)
8.3 20.4 20.2 19.9 19.6 19.4 18.9 8.3
9 18.3 18.2 17.9 17.6 17.4 16.9 9
10 15.8 15.7 15.4 15.1 14.9 14.5 10
12 12.2 12.1 11.8 11.6 11.3 11.0 12
14 9.8 9.7 9.4 9.2 9.0 8.7 14
16 8.0 7.9 7.6 7.5 7.2 6.9 16
19 5.9 5.8 5.5 5.4 5.1 4.9 19
20 5.3 5.2 4.9 4.8 4.5 4.3 20
22 4.4 4.3 4.0 3.9 3.6 3.5 22
24 3.6 3.5 3.3 3.2 2.8 2.7 24
26 3.0 2.9 2.7 2.6 2.2 2.1 26
28 2.5 2.4 2.2 2.1 1.7 1.6 28
29 2.2 2.1 1.9 1.8 1.4 1.3 29
30 2.0 1.9 1.7 1.6 1.2 1.1 30
32 1.6 1.5 1.3 1.2 32
34 1.3 1.2 34
36 1.0 0.9 36

2-26

You might also like