Professional Documents
Culture Documents
6. TERMINATION
Insulation piercing, mechanical stripping, and flame welding
processes can all be used successfully with ULTRASHIELD® PLUS
10
magnet wire. If the connection is to be soldered, it is recommended
that mechanical stripping be used to remove the insulation prior
to soldering.
1
7. NORMAL AVAILABILITY
• Round Copper Sizes:
0.1 9 - 30 AWG, Heavy Build
Heavy Triple Quad Heavy
ULTRASHIELD ® PLUS
Please consult Magnet Wire Marketing for additional size
GP/MR-200 ®
(including metric) and build information.
58875_UltrashldPlus.qxp:Datasheet Ideas 9/24/08 6:23 AM Page 2
3
CONTINUITY
20,000 2
TYPICAL PERFORMANCE: ≤ 1 fault/100 ft.
10,000 1
REQUIRED PERFORMANCE: 5 faults/100 ft., maximum†
9
8
7
6
5
DIELECTRIC BREAKDOWN VOLTAGE
4
ROOM TEMPERATURE
Average Life, Hours
2
TYPICAL PERFORMANCE: 12,900 volts, avg.
REQUIRED PERFORMANCE: 5,700 volts, minimum†
1,000 1
9
8
7
RATED TEMPERATURE
6
5
4
TYPICAL PERFORMANCE: 10,982 volts, avg.
3
REQUIRED PERFORMANCE: 4,275 volts, minimum†
2
180 200 220 240 260 280 300 320 DIELECTRIC BREAKDOWN VOLTAGE
Temperature °C (1/°k) TYPICAL PERFORMANCE: 11,686 volts
REQUIRED PERFORMANCE: 5,700 volts, minimum†
PHYSICAL PROPER TIES SOLUBILITY
TYPICAL PERFORMANCE: Passes
ABRASION RESISTANCE: REPEATED SCRAPE REQUIRED PERFORMANCE: 580 g. scrape, minimum†
TYPICAL PERFORMANCE: 496 strokes, avg.*
* Tests not indicated as NEMA are Essex® Standards.
ABRASION RESISTANCE: UNIDIRECTIONAL ** The values shown represent typical average results and are not intended to be
TYPICAL PERFORMANCE: 2100 g., avg. used as design data or specification limits.
REQUIRED PERFORMANCE: 980 g., minimum; 1150 g., *** Data obtained from standard 18 AWG twisted pairs tested at 150°C, with a 575
minimum avg.† volt drive and motor (phase-to-phase).
† Requirements of NEMA MW 1000; Section MW 35-C or MW 73-C, as applicable.
Essex Group, Inc. All sales are subject to Essex® Standard Terms and Conditions as posted on
1601 Wall Street www.superioressex.com. Copies are available upon request.
Fort Wayne, IN 46802
260.461.4000
® © Essex Group, Inc. 2008