You are on page 1of 11

OBJECTIVES

Providing services in the area of industrial instrumentation and analytical,

in order to install, implement, maintain and advice to ensure equipment

reliability and continuity of processes of our clients, in order to optimize

and improve practices and procedures to meet their standards compliance

in the final commercial product.


¿ What is a Refinery?
Refining is a process used to transform
crude in common products such as
Gasoline, Jet Fuel, wax among others. This
is achieved through processes of mechanical
and chemical separation.

The refinery is a set of units where chemical


transformations and mechanical separations
occur to achieve Refine Crude.
JUSTIFICATION
Oil and petrochemical plants has access to key metrics that allow them to continue

operating efficiently. Maintaining proper chemical proportions and monitoring from

beginning to end processes. Because these highly complex and important Sersoin Inc.

serves as a specialized technical support to all its customers to ensure safe and proper

handling equipment towards optimizing all its processes.


Refinery has next stages as follow:

 Crude conditioning.
 Atmospheric distillation
 Media conversion
 Deep Conversion
 Services
 Wastewater
 Steam Generation
REFINERY SCHEME
Gases / GLP
Naftas
Amospheric G
distillation Gasolina de Alto Octanaje
REFORMATION G
Aromáticos
S G Gasolines
Crude Productos Destilados
HDS D
Residuo Largo
R
Lubricantes
S

destruction
distillation

Parafinas

Catalytic
Vacuum

Alquilatos S D Destilled
HDS
ALQ G
Gasolinas
G
Dest./Diluente
D
Residuo Bajo en Azufre
R
Residuo Corto R Residuals
R
Asfalto
R
Gasolinas
G
Productos Dest.
Residuals D S Specialities
conversion Residuos
R
Coque
S
SCOPE
 Coordination and project management

 Commissioning of equipment

 Analytical instrumentation maintenance and support equipment to suit

your application and delivery such as:

1. Emission Detector

2. Gas Chromatograph.

3. Transmitter fuel and oxygen.

4. Conductivity Sensor.

5. UVS and flame detectors UV / IRS and gas detectors

6. Fine tune the process: gas analyzer


 Instrumentation and Control: maintenance and support equipment to suit your

application and delivery such as:

1. Control valves

2. Temperature transmitter

3. Pressure transmitter

4. Level transmitter

5. Flow transmitter
6. Monitoring systems, detection and extinction. Fire and Gas

7. Final control elements

8. Control and safety systems: PLC and DCS

9. Commissioner and failure systems PLC. Loop tests


 Process engineering staff supplier

 Reliability enginneering

 Design engineering for heat exchange and statics

equipments

 Consultancy engineering
BENEFITS
 Maintained within specification variations in composition of the product

inlet and outlet.

 Improve control of the process units.

 Increasing energy efficiency.

 Control contaminants more effectively.

 Monitor and control hazardous emissions of toxic and combustible gases.

 Control cost accounting and billing product transfers.

 Assurance intrinsic safety of the plant and its areas

You might also like