Professional Documents
Culture Documents
ESTIMATE AMOUNT Rs
The client has requested to prepare an Estimate for his ongoing shopping complex building project located in
Pallapalayam in SF NO: ____ in Pallapalayam vtown panchayat. The proposed plan has been aproved by the
compeitive authority of Coimbatore corporation in its ROC NO.............. dated .......... and the copy of the
plan has also been enclosed herewith.
S.No DESCRIPTION
SUBSTRUCTURE
Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in
1 hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed
with small size boulders etc. complete. complying with std. specifications.SS 20 A(SI.no.61)
Plain Cement Concrete 1:5:10 Mix (one part cement, five part fine aggregate and ten part of coarse
aggregate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of
2
all materials to site. Loading and unloading charges and labour charges for mixing, Laying and curing
etc. complete. Complying with std. specifications.
Plain Cement Concrete 1:4:8 Mix (one part cement, four part fine aggregate and Eight part of
aggregate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of
3
all materials to site. Loading and unloading charges and labour charges for mixing, Laying and curing
etc. complete. Complying with std. specifications.
Reinforced Cement Concrete 1:1½:3 (M20) Mix (One part cement, one and half part of Fine
aggregate and three part of Coarse aggregate) using 20mm size ISS HBG metal machine crushed from
4 approved quarry including cost and conveyance of all materials to site, loading and unloading charges
and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete
with std. Specifications.(Using Vibrator).
a) Upto basement
Centering for sides and soffits of R.C.C. slab surfaces such as beams, lintels roof slabs and sunshades
5 including cost and conveyance of all materials to site and labour charges for centering and strutting
upto 3.00 m height etc. complete. complying with std. specifications.
a) Upto basement
Providing two legged scaffolding using 15cm dia blue-gum posts of 4.0m overall length (3M HT +
0.5M projection + 0.5m into ground) the distance between two rows being 1.25m and the spacing of
postsbeling 2.0m and the spacing of postsbeling 2.0m in both the rows with two horizontal posts with
6
0.5m overlap on either sideand braces at 2m c/cincluding longitudinal and transverse middle braces to
step up and providing a platform with country woodplanks of 40mm tk & 1.0m width in a complete
form using colr and nalls - 1.0m run -- FOR REJUVENATION WORKS
a) Up to 3m height
SUPER STRUCTURE
Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size
9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site.
8
Loading and unloading charges and labour charges for mixing, laying and curing etc. complete.
Complying with std. specifications.
a) Upto basement
FINISHING
Re-filling of Trenches with the excavated earth in layers well rammed and consolidated and
9 depositing the surplus earth in all places with the initial lead and lift including levelling, etc.,
complete. Complying with the standard specification as directed
Plastering in Cement Mortor 1:3 Mix (one cement, Three Fine aggregate) 12mm thick including cost
11 and conveyance of all materials to site, loading and unloading charges and labour charges for mixing,
laying and curing etc. complete. complying with std. specifications.
Plastering in Cement Mortor 1:4 Mix (one Cement, four Fine aggregate) 20mm thick including cost
12 and conveyance of all materials to site, loading and unloading charges and labour charges for mixing,
laying and curing etc. complete. Complying with std. specifications.
a) Upto basement
Plastering in Cement Mortor 1:4 Mix (one Cement, four sand) 20mm thick including cost and
13 conveyance of all materials to site, loading and unloading charges and labour charges for mixing,
laying and curing etc. complete. Complying with std. specifications.
Paving hydraulic pressed cement-Mosaic tiles of approved colour and of size 200 mm x 200 mm x 20
14 mm with CM 1:3, 20 mm thick and pointed with the same colour cement including polishing with
power polisher to a high degree of polish so as to be perfectly smooth and gloossy for 10Sqm.
Laying with new C.C. Laminated tiles (Like Dora tiles Eurocon tiles etc),(anti skid) of 20mm thick of
approved spl quality and set in Cement Mortar 1:3 (1 of cement and 3 of sand ) 20mm. Thick using
15 river sand and pointing with colour cement using at the rate of 0.40 kg/M2 and mixing with colour
pigment at the rate of 0.3 Kg/M2 including finishing complete with Standard Specification and as
directed by the Departmental Officers etc.,
Finishing the top of roof with one course of machine pressed tiles 20 C.m x 20 C.m x 2 C.m size
16 using cement mortor 1:3 mix mixed with 2% by weight of Water proofing compound and pointing
with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete.
Colour washing One coats with good quality of Colour pigments including cost of all materials to site
17 and all other labour charges for mixing, applying and proper curring etc., Complete as per Standard
Specifications.
Supplying, laying and jointing P.V.C. pipes of approved quality and best variety conformming to
I.S.S. and with I.S.I. mark, of the following sizes including cutting threading and fixing P.V.C.
18 specials but excluding cost of such specials and fixing to wall or drilling holes in roof and making
good the dismantled portions to original condition with necessary brick work and plastering wherever
necessary with necessary scaffolding charges.
Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of
550x400mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe,
32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M.
19
wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin
in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without
any leakage complying with standard specifications.
Supplying and fixing in position Indian water closet of size 580x440 mm, white glazed earthen ware
of approved quality with 'P' trap or 'S' trap conforming to IS:2556-part XII with sand cushion and
forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one part of
lime, two parts of fine aggregate and five parts of brick jelly)100mm thick and finishing the top to
20 required slope and including given necessary connection to cast iron soil pipes by dismantling brick
masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to orginal
condition without leakage etc., complete complying with standard specificatios and as directed by the
departmental officers. (The water closet should br got approved by the Executive Engineer before use
on works).
Supplying and fixing in position colour glazed European water closet with 'P' or 'S' trap and double
flapped seat cover, 12.50 litres capacity P.V.C. low level flushing tank including all internal fittings
21 fixed on C.I. brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm
nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls
and floors, including dismantling masonry and redoing the same to the original condition.
Supplying and fixing of push and pull type Rolling shutter confirming to IS 6248/1979 and as
amended from time to time. With ISI make of approved size and section using 18 gauge G.I.sheet.The
22
shutter shall be painted with one coat of red oxide primer and the rate is inclusive of Hood covers ,
transportation charges etc., and as directed by Engineer incharge.
M.S. 'N' Type Ventilator.Supply and fabricating and fixing in position of 'N' type ventilators using
M.S. angles of size 25x25x5mm for frame and M.S.Tee of size 25x25x3mm M.S.flat of size 20x3mm
for fixing the weld mesh.Special type for hold fast welded to the frame of 45 degrees inclined towards
centre of wall and fixing the weldmesh 25mm size including 3 mm thick pin headed glass for all
24 panels and glass panels with necessary clips and puttie with required bolts nuts and waste and one
coat of red oxide primer etc., including necessary dismantling , making holes in RCC
columns,beams,masonary wherever necessary with power drill to the extent required and made good
to the original condition after fixing as directed by department officers. All materials should be got
approved by the Executive Engineer befor fixing in position.
ELECTRIFICATION
Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V
grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with switch
25 box with 5A F.T. switch inflush with wall and covered with hylum sheet of 3mm thick with painting
of suitable colour with continuous earth wire connection of 14 SWG TC wire for light point / Fan
point (For electronic Regulator) SD 2
OVER HEAD MAINS:Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed
26
Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains.SD 64
Supply and fixing of TNEB meter Board suitable for 32A Three Phase service connection with 3 Nos.
32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size
27 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with
suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with
7/20 PVC insulated copper wire from EB meter to fuse unit. SD 127
This estimate has been prepared by using the current year local rates adopted and ongoing labour charges are
used. The expenditure will be meet out from the whole fund of Client own account.
BILL OF QUANTITY
NAME OF WORK :
ESTIMATE AMOUNT Rs
Sl. Measurement
Description of work Nos. Quantity
No Length Breath Depth
SUBSTRUCTURE
Earth work open excavation and depositing on bank with in the initial lead of
10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth,
1
shales, murram, gravel, stoney earth and earth mixed with small size boulders
etc. complete. complying with std. specifications.SS 20 A(SI.no.61)
For Foundation
F1 1 x 18 1.67 1.82 1.83 100.12 m³
F2 1 x 16 1.67 1.67 1.83 81.66
Total 182.00 m³
Plinth beam
North side 1 x 1 24.18 0.38 0.38 3.49 m³
South side 1 x 1 20.95 0.38 0.38 3.03
East side 1 x 1 14.90 0.38 0.38 2.15
West side 1 x 1 11.43 0.38 0.38 1.65
Horizontal beams 1 x 3 20.49 0.38 0.38 8.88
Vertical beams
1 x 10 2.85 0.38 0.38 4.12
1 x 4 1.98 0.38 0.38 1.14
1 x 2 3.50 0.38 0.38 1.01
Total 25.00 m³
Plain Cement Concrete 1:5:10 Mix (one part cement, five part fine aggregate
and ten part of coarse aggregate) using 40 mm size ISS HBG metal from
2 approved quarry including cost and conveyance of all materials to site.
Loading and unloading charges and labour charges for mixing, Laying and
curing etc. complete. Complying with std. specifications.
For Foundation
Plain Cement Concrete 1:4:8 Mix (one part cement, four part fine aggregate
and Eight part of aggregate) using 40 mm size ISS HBG metal from approved
3 quarry including cost and conveyance of all materials to site. Loading and
unloading charges and labour charges for mixing, Laying and curing etc.
complete. Complying with std. specifications.
Reinforced Cement Concrete 1:1½:3 (M20) Mix (One part cement, one and
half part of Fine aggregate and three part of Coarse aggregate) using 20mm
size ISS HBG metal machine crushed from approved quarry including cost
4
and conveyance of all materials to site, loading and unloading charges and
labour charges for mixing, laying and curing but excluding cost of
reinforcement etc. Complete with std. Specifications.(Using Vibrator).
a) Upto basement
For Foundation
Roof beam
Horizontal beams 1 x 4 20.80 0.23 0.38 7.27 m³
1 x 1 13.87 0.23 0.38 1.21
1 x 1 2.26 0.23 0.38 0.20
Vertical beams
1 x 14 2.71 0.23 0.38 3.32
1 x 7 1.83 0.23 0.38 1.12
1 x 5 4.57 0.23 0.38 2.00
1 x 5 1.22 0.23 0.38 0.53
Total 16.00 m³
Roof slab
1 x 1 20.80 8.16 0.15 25.46 m³
1 x 1 7.39 4.80 0.15 5.32
1 x 1 7.70 4.80 0.15 5.54
Lintel level slab 1 x 1 2.26 3.46 0.15 1.17
Total 37.00 m³
Sill beam
North side 1 x 1 20.80 - - 20.80
South side 1 x 1 12.57 - - 12.57
East & West side 1 x 2 9.45 - - 18.90
Centering for sides and soffits of R.C.C. slab surfaces such as beams, lintels
roof slabs and sunshades including cost and conveyance of all materials to
5
site and labour charges for centering and strutting upto 3.00 m height etc.
complete. complying with std. specifications.
a) Upto basement
For Foundation
F1 1 x 18 5.78 - 0.45 46.82 m2
F2 1 x 16 5.48 - 0.45 39.46
Total 86.00 m2
Column
C1 1 x 18 1.06 - 1.23 23.47 m2
C2 1 x 16 0.92 - 1.23 18.11
Total 42.00 m2
Plinth beam
North side 1 x 2 24.03 - 0.38 18.26 m2
South side 1 x 2 20.80 - 0.38 15.81
East side 1 x 2 14.75 - 0.38 11.21
West side 1 x 2 11.28 - 0.38 8.57
Horizontal beams 2 x 2 20.34 - 0.38 30.92
Vertical beams
2 x 10 2.70 - 0.38 20.52
1 x 2 1.83 - 0.38 1.39
1 x 2 3.35 - 0.38 2.55
Total 109.00 m2
a) Ground floor ( Base + First Lift)
Column
C1 1 x 18 1.06 - 3.66 69.83 m2
C2 1 x 16 0.92 - 3.66 53.88
Total 124.00 m2
Roof beam ( Side sheet )
Horizontal beams 2 x 4 20.80 - 0.38 63.23 m2
1 x 2 13.87 - 0.38 10.54
1 x 2 2.26 - 0.38 1.72
Vertical beams - 0.00
2 x 14 2.71 - 0.38 28.83
2 x 7 1.83 - 0.38 9.74
2 x 5 4.57 - 0.38 17.37
2 x 5 1.22 - 0.38 4.64
Total 136.00 m2
Roof beam ( Bottom sheet )
Horizontal beams 1 x 4 20.80 0.23 - 19.14 m2
1 x 1 13.87 0.23 - 3.19
1 x 1 2.26 0.23 - 0.52
Vertical beams
1 x 14 2.71 0.23 - 8.73
1 x 7 1.83 0.23 - 2.95
1 x 5 4.57 0.23 - 5.26
1 x 5 1.22 0.23 - 1.40
Total 41.00 m2
Roof slab ( Side sheet )
1 x 1 57.92 - 0.15 8.69 m2
1 x 1 24.38 - 0.15 3.66
1 x 1 25.00 - 0.15 3.75
Lintel level slab 1 x 1 11.44 - 0.15 1.72
Total 18.00 m2
Roof slab ( Bottom sheet )
1 x 1 57.92 - - 57.92 m
1 x 1 24.38 - - 24.38
1 x 1 25.00 - - 25.00
Lintel level slab 1 x 1 11.44 - - 11.44
Total 119.00 m
Total 119.00 m
c) Terrace floor (FF)
Headroom slab (Side sheet) 1 x 1 18.00 - 0.15 2.70
Total 3.00 m2
Headroom slab (Bottom sheet) 1 x 1 18.00 - - 18.00
Total 18.00 m
Providing two legged scaffolding using 15cm dia blue-gum posts of 4.0m
overall length (3M HT + 0.5M projection + 0.5m into ground) the distance
between two rows being 1.25m and the spacing of postsbeling 2.0m and the
spacing of postsbeling 2.0m in both the rows with two horizontal posts with
6
0.5m overlap on either sideand braces at 2m c/cincluding longitudinal and
transverse middle braces to step up and providing a platform with country
woodplanks of 40mm tk & 1.0m width in a complete form using colr and
nalls - 1.0m run -- FOR REJUVENATION WORKS
a) Up to 3m height
b) 3m + every 2.5m height
Supplying fabricating and placing in position of steel rods using M.S. or
Ribbed Tor Steel including cost of binding wire, cost of labour charges for
7 fabrication and placing in position etc. Complete. Complying with std.
specifications.
16.00 MT
SUPER STRUCTURE
Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new
best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry
8 including cost and conveyance of all materials to site. Loading and unloading
charges and labour charges for mixing, laying and curing etc. complete.
Complying with std. specifications.
a) Upto basement
Brick on edge
North side 1 x 1 24.03 - - 24.03 m
South side 1 x 1 20.80 - - 20.80
East side 1 x 1 14.75 - - 14.75
West side 1 x 1 11.28 - - 11.28
Horizontal walls 1 x 2 20.34 - - 40.68
Vertical walls - - 0.00
1 x 10 2.70 - - 27.00
1 x 1 1.83 - - 1.83
1 x 1 3.35 - - 3.35
Total 144.00 m
For basement
North side 1 x 1 20.03 0.23 0.91 4.19 m³
South side 1 x 1 12.58 0.23 0.91 2.63
East side 1 x 1 14.74 0.23 0.91 3.09
West side 1 x 1 11.28 0.23 0.91 2.36
Horizontal walls 1 x 5 3.35 0.23 0.91 3.51
1 x 1 13.69 0.23 0.91 2.87
Vertical walls
1 x 5 5.64 0.23 0.91 5.90
1 x 2 3.35 0.23 0.91 1.40
Total 26.00 m³
b) Ground floor ( Base + First Lift)
North side 1 x 1 20.80 0.23 3.66 17.51 m³
South side 1 x 1 12.57 0.23 3.66 10.58
East & West side 1 x 2 9.45 0.23 3.66 15.91
Re-filling of Trenches with the excavated earth in layers well rammed and
consolidated and depositing the surplus earth in all places with the initial lead
9
and lift including levelling, etc., complete. Complying with the standard
specification as directed
Collection, supply and filling of well gravel in approved quarry including cost
10 and Conveyance of all materials to site and all labour charges for filling etc.,
Complete.
Plastering in Cement Mortor 1:3 Mix (one cement, Three Fine aggregate)
12mm thick including cost and conveyance of all materials to site, loading
11
and unloading charges and labour charges for mixing, laying and curing etc.
complete. complying with std. specifications.
Plastering in Cement Mortor 1:4 Mix (one Cement, four Fine aggregate)
20mm thick including cost and conveyance of all materials to site, loading
12
and unloading charges and labour charges for mixing, laying and curing etc.
complete. Complying with std. specifications.
a) Upto basement
Shop 1,2,3,4,5,6 1 x 1 17.98 - 0.91 16.36 m2
Staircase 1 x 1 16.16 - 0.91 14.71
Toilet 1 x 2 6.60 - 0.91 12.01
Total 43.00 m2
Plastering in Cement Mortor 1:4 Mix (one Cement, four sand) 20mm thick
including cost and conveyance of all materials to site, loading and unloading
13
charges and labour charges for mixing, laying and curing etc. complete.
Complying with std. specifications.
External
North side 1 x 1 18.54 - 8.38 155.37
South side 1 x 1 12.58 - 8.38 105.42
East & West side 1 x 2 9.91 - 8.38 166.09
Toilet 1 x 1 9.18 - 4.88 44.80
Head room 1 x 1 14.67 - 2.44 35.79
Total 507.00 m2
Ground floor
Shop 1,2,3,4,5,6 1 x 6 3.35 - 5.64 113.36 m2
Shop 7 1 x 1 6.02 - 3.35 20.17
Staircase 1 x 1 1.29 - 2.66 3.43
Passage
1 x 1 20.80 - 1.83 38.06
1 x 2 1.22 - 5.03 12.27
1 x 1 12.58 - 1.22 15.35
Total 203.00 m2
First floor
Shop 1,2,3,4,5,6 1 x 6 3.35 - 5.64 113.36 m2
Shop 7 1 x 1 6.02 - 3.35 20.17
Staircase 1 x 1 1.29 - 2.66 3.43
Passage
1 x 1 20.80 - 1.83 38.06
1 x 2 1.22 - 5.03 12.27
1 x 1 12.58 - 1.22 15.35
Total 203.00 m2
Laying with new C.C. Laminated tiles (Like Dora tiles Eurocon tiles etc),(anti
skid) of 20mm thick of approved spl quality and set in Cement Mortar 1:3 (1
of cement and 3 of sand ) 20mm. Thick using river sand and pointing with
15
colour cement using at the rate of 0.40 kg/M2 and mixing with colour
pigment at the rate of 0.3 Kg/M2 including finishing complete with Standard
Specification and as directed by the Departmental Officers etc.,
Finishing the top of roof with one course of machine pressed tiles 20 C.m x
20 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight
16
of Water proofing compound and pointing with Cement Mortor 1:3 mix Cost
of all materials and labour charges and brick jelly concrete.
Colour washing One coats with good quality of Colour pigments including
17 cost of all materials to site and all other labour charges for mixing, applying
and proper curring etc., Complete as per Standard Specifications.
Supplying, laying and jointing P.V.C. pipes of approved quality and best
variety conformming to I.S.S. and with I.S.I. mark, of the following sizes
including cutting threading and fixing P.V.C. specials but excluding cost of
18
such specials and fixing to wall or drilling holes in roof and making good the
dismantled portions to original condition with necessary brick work and
plastering wherever necessary with necessary scaffolding charges.
Supplying and fixing in position best Indian make white glazed earthenware
WASH HAND BASIN of 550x400mm with a a pair of C.I. Brackets, 15mm
dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster
coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel
19 2.00 No
valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing
wash hand basin in position with white lead, clamps, teakwood plugs, screws,
rubber washer etc., complete without any leakage complying with standard
specifications.
Supplying and fixing in position Indian water closet of size 580x440 mm,
white glazed earthen ware of approved quality with 'P' trap or 'S' trap
conforming to IS:2556-part XII with sand cushion and forming flooring
alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one
part of lime, two parts of fine aggregate and five parts of brick jelly)100mm
20 thick and finishing the top to required slope and including given necessary 2.00 No
connection to cast iron soil pipes by dismantling brick masonry, reinforced
cement concrete roof/floor slab and making good the disturbed portion to
orginal condition without leakage etc., complete complying with standard
specificatios and as directed by the departmental officers. (The water closet
should br got approved by the Executive Engineer before use on works).
Supplying and fixing in position colour glazed European water closet with 'P'
or 'S' trap and double flapped seat cover, 12.50 litres capacity P.V.C. low level
flushing tank including all internal fittings fixed on C.I. brackets, 12mm PVC
21 or brass nipple, chromium plated brown headed stopcock, 12mm nylon 2.00 No
connection with necessary teakwood plugs, clamps, screws to the portion
coming with walls and floors, including dismantling masonry and redoing the
same to the original condition.
Supplying and fixing of push and pull type Rolling shutter confirming to IS
6248/1979 and as amended from time to time. With ISI make of approved size
22 and section using 18 gauge G.I.sheet.The shutter shall be painted with one 18.00 No
coat of red oxide primer and the rate is inclusive of Hood covers ,
transportation charges etc., and as directed by Engineer incharge.
M.S. 'N' Type Ventilator.Supply and fabricating and fixing in position of 'N'
type ventilators using M.S. angles of size 25x25x5mm for frame and M.S.Tee
of size 25x25x3mm M.S.flat of size 20x3mm for fixing the weld
mesh.Special type for hold fast welded to the frame of 45 degrees inclined
towards centre of wall and fixing the weldmesh 25mm size including 3 mm
thick pin headed glass for all panels and glass panels with necessary clips and
24 4.00 No
puttie with required bolts nuts and waste and one coat of red oxide primer
etc., including necessary dismantling , making holes in RCC
columns,beams,masonary wherever necessary with power drill to the extent
required and made good to the original condition after fixing as directed by
department officers. All materials should be got approved by the Executive
Engineer befor fixing in position.
ELECTRIFICATION
Supply and fixing of TNEB meter Board suitable for 32A Three Phase service
connection with 3 Nos. 32A Fuse unit (500V) 32A neutral link and earth link
(1" x 1/8" Copper flat) on TW plank of size 600mm x 450mm x 19mm with
27 supporting TW reepers of 1" thick an either side with painting with suitable 1.00 No
bolt and nuts for fixing the TW plank on wall with earth connection and inter
connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.
SD 127
Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with
28 30.00 No
5A flush type switch on suitable TW box. SD 133
MT
BILL OF QUANTITY
NAME OF WORK :
ESTIMATE AMOUNT Rs
Sl. Measurement
Description of work Nos. Quantity
No Length Breath Depth
SUBSTRUCTURE
Earth work open excavation and depositing on bank with in the initial lead of
10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth,
1
shales, murram, gravel, stoney earth and earth mixed with small size boulders
etc. complete. complying with std. specifications.SS 20 A(SI.no.61)
For Foundation
F1 1 x 18 1.67 1.82 1.83 100.12 m³
F2 1 x 16 1.67 1.67 1.83 81.66
Total 182.00 m³
Plinth beam
North side 1 x 1 24.18 0.38 0.38 3.49 m³
South side 1 x 1 20.95 0.38 0.38 3.03
East side 1 x 1 14.90 0.38 0.38 2.15
West side 1 x 1 11.43 0.38 0.38 1.65
Horizontal beams 1 x 3 20.49 0.38 0.38 8.88
Vertical beams
1 x 10 2.85 0.38 0.38 4.12
1 x 4 1.98 0.38 0.38 1.14
1 x 2 3.50 0.38 0.38 1.01
Total 25.00 m³
Plain Cement Concrete 1:5:10 Mix (one part cement, five part fine aggregate
and ten part of coarse aggregate) using 40 mm size ISS HBG metal from
2 approved quarry including cost and conveyance of all materials to site.
Loading and unloading charges and labour charges for mixing, Laying and
curing etc. complete. Complying with std. specifications.
For Foundation
Plain Cement Concrete 1:4:8 Mix (one part cement, four part fine aggregate
and Eight part of aggregate) using 40 mm size ISS HBG metal from approved
3 quarry including cost and conveyance of all materials to site. Loading and
unloading charges and labour charges for mixing, Laying and curing etc.
complete. Complying with std. specifications.
Reinforced Cement Concrete 1:1½:3 (M20) Mix (One part cement, one and
half part of Fine aggregate and three part of Coarse aggregate) using 20mm
size ISS HBG metal machine crushed from approved quarry including cost
4
and conveyance of all materials to site, loading and unloading charges and
labour charges for mixing, laying and curing but excluding cost of
reinforcement etc. Complete with std. Specifications.(Using Vibrator).
a) Upto basement
For Foundation
Roof beam
Horizontal beams 1 x 4 20.80 0.23 0.38 7.27 m³
1 x 1 13.87 0.23 0.38 1.21
1 x 1 2.26 0.23 0.38 0.20
Vertical beams
1 x 14 2.71 0.23 0.38 3.32
1 x 7 1.83 0.23 0.38 1.12
1 x 5 4.57 0.23 0.38 2.00
1 x 5 1.22 0.23 0.38 0.53
Total 16.00 m³
Roof slab
1 x 1 20.80 8.16 0.15 25.46 m³
1 x 1 7.39 4.80 0.15 5.32
1 x 1 7.70 4.80 0.15 5.54
Lintel level slab 1 x 1 2.26 3.46 0.15 1.17
Total 37.00 m³
Sill beam
North side 1 x 1 20.80 - - 20.80
South side 1 x 1 12.57 - - 12.57
East & West side 1 x 2 9.45 - - 18.90
Centering for sides and soffits of R.C.C. slab surfaces such as beams, lintels
roof slabs and sunshades including cost and conveyance of all materials to
5
site and labour charges for centering and strutting upto 3.00 m height etc.
complete. complying with std. specifications.
a) Upto basement
For Foundation
F1 1 x 18 5.78 - 0.45 46.82 m2
F2 1 x 16 5.48 - 0.45 39.46
Total 86.00 m2
Column
C1 1 x 18 1.06 - 1.23 23.47 m2
C2 1 x 16 0.92 - 1.23 18.11
Total 42.00 m2
Plinth beam
North side 1 x 2 24.03 - 0.38 18.26 m2
South side 1 x 2 20.80 - 0.38 15.81
East side 1 x 2 14.75 - 0.38 11.21
West side 1 x 2 11.28 - 0.38 8.57
Horizontal beams 2 x 2 20.34 - 0.38 30.92
Vertical beams
2 x 10 2.70 - 0.38 20.52
1 x 2 1.83 - 0.38 1.39
1 x 2 3.35 - 0.38 2.55
Total 109.00 m2
a) Ground floor ( Base + First Lift)
Column
C1 1 x 18 1.06 - 3.66 69.83 m2
C2 1 x 16 0.92 - 3.66 53.88
Total 124.00 m2
Roof beam ( Side sheet )
Horizontal beams 2 x 4 20.80 - 0.38 63.23 m2
1 x 2 13.87 - 0.38 10.54
1 x 2 2.26 - 0.38 1.72
Vertical beams - 0.00
2 x 14 2.71 - 0.38 28.83
2 x 7 1.83 - 0.38 9.74
2 x 5 4.57 - 0.38 17.37
2 x 5 1.22 - 0.38 4.64
Total 136.00 m2
Roof beam ( Bottom sheet )
Horizontal beams 1 x 4 20.80 0.23 - 19.14 m2
1 x 1 13.87 0.23 - 3.19
1 x 1 2.26 0.23 - 0.52
Vertical beams
1 x 14 2.71 0.23 - 8.73
1 x 7 1.83 0.23 - 2.95
1 x 5 4.57 0.23 - 5.26
1 x 5 1.22 0.23 - 1.40
Total 41.00 m2
Roof slab ( Side sheet )
1 x 1 57.92 - 0.15 8.69 m2
1 x 1 24.38 - 0.15 3.66
1 x 1 25.00 - 0.15 3.75
Lintel level slab 1 x 1 11.44 - 0.15 1.72
Total 18.00 m2
Roof slab ( Bottom sheet )
1 x 1 57.92 - - 57.92 m
1 x 1 24.38 - - 24.38
1 x 1 25.00 - - 25.00
Lintel level slab 1 x 1 11.44 - - 11.44
Total 119.00 m
Total 119.00 m
c) Terrace floor (FF)
Headroom slab (Side sheet) 1 x 1 18.00 - 0.15 2.70
Total 3.00 m2
Headroom slab (Bottom sheet) 1 x 1 18.00 - - 18.00
Total 18.00 m
Providing two legged scaffolding using 15cm dia blue-gum posts of 4.0m
overall length (3M HT + 0.5M projection + 0.5m into ground) the distance
between two rows being 1.25m and the spacing of postsbeling 2.0m and the
spacing of postsbeling 2.0m in both the rows with two horizontal posts with
6
0.5m overlap on either sideand braces at 2m c/cincluding longitudinal and
transverse middle braces to step up and providing a platform with country
woodplanks of 40mm tk & 1.0m width in a complete form using colr and
nalls - 1.0m run -- FOR REJUVENATION WORKS
a) Up to 3m height
b) 3m + every 2.5m height
Supplying fabricating and placing in position of steel rods using M.S. or
Ribbed Tor Steel including cost of binding wire, cost of labour charges for
7 fabrication and placing in position etc. Complete. Complying with std.
specifications.
16.00 MT
SUPER STRUCTURE
Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new
best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry
8 including cost and conveyance of all materials to site. Loading and unloading
charges and labour charges for mixing, laying and curing etc. complete.
Complying with std. specifications.
a) Upto basement
Brick on edge
North side 1 x 1 24.03 - - 24.03 m
South side 1 x 1 20.80 - - 20.80
East side 1 x 1 14.75 - - 14.75
West side 1 x 1 11.28 - - 11.28
Horizontal walls 1 x 2 20.34 - - 40.68
Vertical walls - - 0.00
1 x 10 2.70 - - 27.00
1 x 1 1.83 - - 1.83
1 x 1 3.35 - - 3.35
Total 144.00 m
For basement
North side 1 x 1 20.03 0.23 0.91 4.19 m³
South side 1 x 1 12.58 0.23 0.91 2.63
East side 1 x 1 14.74 0.23 0.91 3.09
West side 1 x 1 11.28 0.23 0.91 2.36
Horizontal walls 1 x 5 3.35 0.23 0.91 3.51
1 x 1 13.69 0.23 0.91 2.87
Vertical walls
1 x 5 5.64 0.23 0.91 5.90
1 x 2 3.35 0.23 0.91 1.40
Total 26.00 m³
b) Ground floor ( Base + First Lift)
North side 1 x 1 20.80 0.23 3.66 17.51 m³
South side 1 x 1 12.57 0.23 3.66 10.58
East & West side 1 x 2 9.45 0.23 3.66 15.91
Re-filling of Trenches with the excavated earth in layers well rammed and
consolidated and depositing the surplus earth in all places with the initial lead
9
and lift including levelling, etc., complete. Complying with the standard
specification as directed
Collection, supply and filling of well gravel in approved quarry including cost
10 and Conveyance of all materials to site and all labour charges for filling etc.,
Complete.
Plastering in Cement Mortor 1:3 Mix (one cement, Three Fine aggregate)
12mm thick including cost and conveyance of all materials to site, loading
11
and unloading charges and labour charges for mixing, laying and curing etc.
complete. complying with std. specifications.
Plastering in Cement Mortor 1:4 Mix (one Cement, four Fine aggregate)
20mm thick including cost and conveyance of all materials to site, loading
12
and unloading charges and labour charges for mixing, laying and curing etc.
complete. Complying with std. specifications.
a) Upto basement
Shop 1,2,3,4,5,6 1 x 1 17.98 - 0.91 16.36 m2
Staircase 1 x 1 16.16 - 0.91 14.71
Toilet 1 x 2 6.60 - 0.91 12.01
Total 43.00 m2
Plastering in Cement Mortor 1:4 Mix (one Cement, four sand) 20mm thick
including cost and conveyance of all materials to site, loading and unloading
13
charges and labour charges for mixing, laying and curing etc. complete.
Complying with std. specifications.
External
North side 1 x 1 18.54 - 8.38 155.37
South side 1 x 1 12.58 - 8.38 105.42
East & West side 1 x 2 9.91 - 8.38 166.09
Toilet 1 x 1 9.18 - 4.88 44.80
Head room 1 x 1 14.67 - 2.44 35.79
Total 507.00 m2
Ground floor
Shop 1,2,3,4,5,6 1 x 6 3.35 - 5.64 113.36 m2
Shop 7 1 x 1 6.02 - 3.35 20.17
Staircase 1 x 1 1.29 - 2.66 3.43
Passage
1 x 1 20.80 - 1.83 38.06
1 x 2 1.22 - 5.03 12.27
1 x 1 12.58 - 1.22 15.35
Total 203.00 m2
First floor
Shop 1,2,3,4,5,6 1 x 6 3.35 - 5.64 113.36 m2
Shop 7 1 x 1 6.02 - 3.35 20.17
Staircase 1 x 1 1.29 - 2.66 3.43
Passage
1 x 1 20.80 - 1.83 38.06
1 x 2 1.22 - 5.03 12.27
1 x 1 12.58 - 1.22 15.35
Total 203.00 m2
Laying with new C.C. Laminated tiles (Like Dora tiles Eurocon tiles etc),(anti
skid) of 20mm thick of approved spl quality and set in Cement Mortar 1:3 (1
of cement and 3 of sand ) 20mm. Thick using river sand and pointing with
15
colour cement using at the rate of 0.40 kg/M2 and mixing with colour
pigment at the rate of 0.3 Kg/M2 including finishing complete with Standard
Specification and as directed by the Departmental Officers etc.,
Finishing the top of roof with one course of machine pressed tiles 20 C.m x
20 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight
16
of Water proofing compound and pointing with Cement Mortor 1:3 mix Cost
of all materials and labour charges and brick jelly concrete.
Colour washing One coats with good quality of Colour pigments including
17 cost of all materials to site and all other labour charges for mixing, applying
and proper curring etc., Complete as per Standard Specifications.
Supplying, laying and jointing P.V.C. pipes of approved quality and best
variety conformming to I.S.S. and with I.S.I. mark, of the following sizes
including cutting threading and fixing P.V.C. specials but excluding cost of
18
such specials and fixing to wall or drilling holes in roof and making good the
dismantled portions to original condition with necessary brick work and
plastering wherever necessary with necessary scaffolding charges.
Supplying and fixing in position best Indian make white glazed earthenware
WASH HAND BASIN of 550x400mm with a a pair of C.I. Brackets, 15mm
dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster
coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel
19 2.00 No
valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing
wash hand basin in position with white lead, clamps, teakwood plugs, screws,
rubber washer etc., complete without any leakage complying with standard
specifications.
Supplying and fixing in position Indian water closet of size 580x440 mm,
white glazed earthen ware of approved quality with 'P' trap or 'S' trap
conforming to IS:2556-part XII with sand cushion and forming flooring
alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one
part of lime, two parts of fine aggregate and five parts of brick jelly)100mm
20 thick and finishing the top to required slope and including given necessary 2.00 No
connection to cast iron soil pipes by dismantling brick masonry, reinforced
cement concrete roof/floor slab and making good the disturbed portion to
orginal condition without leakage etc., complete complying with standard
specificatios and as directed by the departmental officers. (The water closet
should br got approved by the Executive Engineer before use on works).
Supplying and fixing in position colour glazed European water closet with 'P'
or 'S' trap and double flapped seat cover, 12.50 litres capacity P.V.C. low level
flushing tank including all internal fittings fixed on C.I. brackets, 12mm PVC
21 or brass nipple, chromium plated brown headed stopcock, 12mm nylon 2.00 No
connection with necessary teakwood plugs, clamps, screws to the portion
coming with walls and floors, including dismantling masonry and redoing the
same to the original condition.
Supplying and fixing of push and pull type Rolling shutter confirming to IS
6248/1979 and as amended from time to time. With ISI make of approved size
22 and section using 18 gauge G.I.sheet.The shutter shall be painted with one 18.00 No
coat of red oxide primer and the rate is inclusive of Hood covers ,
transportation charges etc., and as directed by Engineer incharge.
M.S. 'N' Type Ventilator.Supply and fabricating and fixing in position of 'N'
type ventilators using M.S. angles of size 25x25x5mm for frame and M.S.Tee
of size 25x25x3mm M.S.flat of size 20x3mm for fixing the weld
mesh.Special type for hold fast welded to the frame of 45 degrees inclined
towards centre of wall and fixing the weldmesh 25mm size including 3 mm
thick pin headed glass for all panels and glass panels with necessary clips and
24 4.00 No
puttie with required bolts nuts and waste and one coat of red oxide primer
etc., including necessary dismantling , making holes in RCC
columns,beams,masonary wherever necessary with power drill to the extent
required and made good to the original condition after fixing as directed by
department officers. All materials should be got approved by the Executive
Engineer befor fixing in position.
ELECTRIFICATION
Supply and fixing of TNEB meter Board suitable for 32A Three Phase service
connection with 3 Nos. 32A Fuse unit (500V) 32A neutral link and earth link
(1" x 1/8" Copper flat) on TW plank of size 600mm x 450mm x 19mm with
27 supporting TW reepers of 1" thick an either side with painting with suitable 1.00 No
bolt and nuts for fixing the TW plank on wall with earth connection and inter
connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.
SD 127
Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with
28 30.00 No
5A flush type switch on suitable TW box. SD 133
MT
NAME OF WORK :
ESTIMATE AMOUNT Rs
Sl.
Description of work Qty Rate Amount
No.
SUBSTRUCTURE
a) Upto basement
a) Upto basement
a) Up to 3m height 0.00
a) Upto basement
FINISHING
ELECTRIFICATION
8209803.48
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###
###