Professional Documents
Culture Documents
Protective
C lothing
Lakeland's Limited Use and Chemical Protective Apparel are available with these Seams:
Serged Seams Sewn and Bound Seams Heat Sealed Seams Heat Sealed Seams Plus
A serged seam joins two pieces of material with A sewn and bound seam joins two A heat sealed seam is sewn and This is the strongest seam that
a thread that interlocks. This is an economical pieces of material with an overlay of then sealed with a heat activated Lakeland offers. The seam is sewn
stitching method for general applications. This similar material and is chain stitched tape. This method provides liquid and then heat sealed on the
stitching method is generally not used for through all of the layers for a clean proof seams, and is especially outside and inside to offer the
chemical protective clothing. It is more finished edge. This provides useful for Level A and B chemical highest strength and chemical
commonly found on limited use clothing where increased holdout of liquids and dry protective clothing. resistance.
dry particles are of a concern. particulates.
Note: Chemical Resistance Data is in accordance with ASTM F-903 test method. Testing
is performed on fabric samples only, not finished garments. Sources for all test data are
independent laboratory conditions and not actual use conditions.
Pyrolom® CRFR
Quick Pic
n Great Barrier,
chemical resistant
n High strength,
nylon scrim
reinforced
n Excellent abrasion
resistance
n Liquid splash and
dray particulate
protection
n Exceeds NFPA 2113
51130 51150 51155 for flame resistance
Coverall, hood, elastic face, wrists, Coverall, hood, elastic face and Coverall, expanded back for
and ankles. wrists and attached boots. SCBA, hood, elastic face, wrists,
Sizes: S - 5XL Sizes: S - 5XL over boots.
Case Pack: 6 Case Pack: 6 Sizes: S - 5XL
Case Weight: 6 lbs Case Weight: 6 lbs Case Pack: 6
Case Weight: 6 lbs
Warnings:
1. ChemMAX® 1 is not flame resistant and should not be used around heat, flame sparks, or
in potentially flammable or explosive environments.
2. Garments made of ChemMAX® 1 should have slip resistant or anti-slip materials on the
outer surface of boots, shoe covers or other garment surfaces in conditions where slipping
could occur.
Sewn &
Bound
Seams
Sealed
Seams
ChemMAX® 1
C1T100 C1T130 C1T150 Quick Pic
Coverall, collar, open wrists and Coverall, hood, elastic face, wrists Coverall, hood, elastic face,
ankles. and ankles. wrists, attached boots. n Available in serged,
Sizes: S – 5XL Sizes: S – 5XL Sizes: S – 5XL bound, and sealed
Case Pack: 6 Case Pack: 6 Case Pack: 6 seams
Case Weight: 6 lbs. Case Weight: 6 lbs. Case Weight: 6 lbs. n Economical,
lightweight
n Light Chemical
Resistance
Warnings:
1. Tychem® QC is not flame resistant and should not be used around heat, flame sparks, or in
potentially flammable or explosive environments.
2. Garments made of Tychem® QC should have slip resistant or anti-slip materials on the
outer surface of boots, shoe covers or other garment surfaces in conditions where slipping
could occur.
Note: Chemical Resistance Data is in accordance with ASTM F-739 test method. Testing
is performed on fabric samples only, not finished garments. Sources for all test data are
independent laboratory conditions and not actual use conditions.
Sewn &
Bound
Seams
05412 05414
Tychem® QC coverall with collar and zipper. Tychem® QC coverall, zipper, attached hood,
Serged seams. boots, elastic wrists. Serged seams.
Sizes: S – 5XL Sizes: S – 5XL
Case Pack: 25 Case Pack: 25
Case Weight: 9 lbs. Case Weight: 13 lbs.
*Sewn and Bound seams available as Style No. 55412. *Sewn and Bound seams available as Style No. 55414.
Tychem® QC
Quick Pic
n Economical
n Light Chemical
Splash Protection
05417 05428
Tychem® QC coverall with collar and zipper, elastic Tychem® QC coverall, zipper, attached hood, elastic
wrist and ankles. Serged seams. wrists and ankles. Serged seams.
Sizes: S – 5XL Sizes: S – 5XL
Case Pack: 25 Case Pack: 25
Case Weight: 11 lbs. Case Weight: 11 lbs.
*Sewn and Bound seams available as Style No. 55417. *Sewn and Bound seams available as Style No. 55428.
05201 05301
Tychem® QC shirt - snap closure, Tychem® QC pants - elastic waist
long sleeve. Sizes: S – 5XL
Sizes: S – 5XL Case Pack: 50
Case Pack: 50 Case Weight: 10 lbs.
Case Weight: 10 lbs.
Sewn &
Bound
Seams
Sealed
Seams
ND = None Detected
> = greater than
L = liquid
G = gas
Numbers reported are averages of samples tested by the ASTM F739 test method. Sample
results do vary and therefore averages for these results are reported.
Warnings:
1. ChemMAX® 2 is not flame resistant and should not be used around heat, flame sparks,
or in potentially flammable or explosive environments.
2. Garments made of ChemMAX® 2 should have slip resistant or anti-slip materials on the
outer surface of boots, shoe covers or other garment surfaces in conditions where slipping
could occur.
Note: Chemical Resistance Data is in accordance with ASTM F-739 test method. Testing is per-
formed on fabric samples only, not finished garments. Sources for all test data are independent
laboratory conditions and not actual use conditions.
ChemMAX® 2
Quick Pic
n Bound and sealed
seams
n Light Chemical
Splash Protection
Note: Chemical Resistance Data is in accordance with ASTM F-739 test method. Testing
is performed on fabric samples only, not finished garments. Sources for all test data are
independent laboratory conditions and not actual use conditions.
12 Order Now! 1-800-645-9291 • www.lakeland.com
Sewn and
Bound
Seams
Sewn &
bound
44414 44412 Seams
Tychem® SL coverall, zipper with storm Tychem® SL coverall with collar,
flap, attached hood, boots, elastic wrists. zipper with storm flap. Bound seam
Bound seam construction. construction.
Sizes: S – 5XL Sizes: S – 5XL
Case Pack: 12 Case Pack: 12
Case Weight: 10 lbs. Case Weight: 10 lbs.
Tychem® SL
Quick Pic
n Light chemical
splash protection
n Available in gray
n Tested against some
chemical warfare
agents
44417 44427
Tychem® SL coverall with collar, zipper Tychem® SL coverall, zipper with storm
with storm flap, elastic wrist and ankles. flap, attached hood. Bound seam
Bound seam construction. construction.
Sizes: S – 5XL Sizes: S – 5XL
Case Pack: 12 Case Pack: 12
Case Weight: 10 lbs. Case Weight: 12 lbs
Order Now! 1-800-645-9291 • www.lakeland.com 13
Sewn &
bound
Seams
72110
Tychem® SL coverall, collar,
elastic wrists and ankles.
Sizes: S – 5XL
Case Pack: 6
Case Weight: 6 lbs
44901
Tychem® SL shoe cover, elastic top.
Sizes: S/M, L/ XL
Case Pack: 100 pr.
Case Weight: 9 lbs
44903
Tychem® SL boot cover, elastic top.
Sizes: S/M, L/ XL
Case Pack: 200 pr.
Case Weight: 11 lbs.
72400 72735
Tychem® SL encapsulated suit Tychem® SL apron, bib
(Level B), rear entry, flat back, style, knee length, ties
48” zipper, storm flap, 20 mil at neck and waist.
PVC faceshield, elastic wrists, 1 Sizes: one size
exhaust port with shroud, air Case Pack: 12
tube inlet, attached sock boots Case Weight: 8 lbs
with boot flaps. Suit is not gas/
vapor tight.
Sizes: S – 5XL
Case Pack: 3
Case Weight: 7 lbs.
Also available in rear entry,
expanded back, item 72450, and
front entry, expanded back, item
72440.
ND = None Detected
> = greater than
L = liquid
G = gas
Numbers reported are averages of samples tested by the ASTM F739 test method. Sample
results do vary and therefore averages for these results are reported.
Warnings:
1. ChemMAX® 3 is not flame resistant and should not be used around heat, flame sparks,
or in potentially flammable or explosive environments.
2. Garments made of ChemMAX®3 should have slip resistant or anti-slip materials on the
outer surface of boots, shoe covers or other garment surfaces in conditions where slipping
could occur.
ChemMAX® 3
Quick Pic
n Sealed seams
n Heavy chemical
splash protection
n Flexible and
lightweight
n Chemical Warfare
Agent tested
Note: Chemical Resistance Data is in accordance with ASTM F-739 test method. Testing is per-
formed on fabric samples only, not finished garments. Sources for all test data are independent
laboratory conditions and not actual use conditions.
Tychem® F
Quick Pic
n Tested against all
chemical warfare
agents
n Used by military
and civilian
responders
Normalized Average
Physical Breakthrough Permeation Rate
Tychem® BR. Chemical Protection and Enhanced Flexibility. Chemical Name
Acetone
Phase
L
Time (min.)
>480
(µg/cm2/min)
<0.001
Handling hazardous chemicals is a dangerous business. You need Acetonitrile L >480 <0.003
the most protection possible. That's where Tychem® BR fits in. Ammonia (gas) G 46 0.62
Providing extensive protection, Tychem® BR is supported with a 1,3- Butadiene G >480 <0.001
broad range of barrier documentation. In fact, Tychem® BR has Carbon disulfide L >480 <0.001
been tested against more than 200 chemicals, including the ones Chlorine gas G >480 <0.01
Dichloromethane L 432 0.06
most involved in industrial or HazMat incidents.
Diethylamine L >480 <0.001
Lakeland Chemical protective clothing is known for offering N,N-Dimethylformamide L >480 <0.001
excellent protection and value. Tychem® BR is another fine example. Ethyl acetate L >480 <0.001
It offers the tear, puncture and abrasion resistance you deserve. Ethylene oxide G >480 <0.01
Superior protection does not come at the expense of comfort. n-Hexane L >480 <0.001
Hydrogen chloride G >480 <0.1
Tychem® BR garments are soft and lightweight, allowing workers
Methanol L 157 0.81
to move with ease. Tychem® BR is ideal for a variety of work Methyl chloride G >480 <0.001
environments. Nitrobenzene L >480 <0.001
Tychem® BR is yellow for high visibility. Whether there is bright or Sodium hydroxide, 50% L >480 <0.01
dim light, Tychem® BR can be seen. That's why it is an excellent Sulfuric acid (conc.) L >480 <0.01
choice for HazMat teams. Tetrachloroethylene L >480 <0.001
Tetrahydrofuran L >480 <0.001
Toluene L >480 <0.001
Note: Chemical Resistance Data is in accordance with ASTM F-739 test method. Testing
is performed on fabric samples only, not finished garments. Sources for all test data are
independent laboratory conditions and not actual use conditions.
Tychem® BR
Quick Pic
n Heavy chemical
splash protection
n Flexible and
lightweight
n High-visibility
n Superior fabric
strength
n Chemical Warfare
Agent tested
Note: Chemical Resistance Data is in accordance with ASTM F-739 test method. Testing
is performed on fabric samples only, not finished garments. Sources for all test data are
independent laboratory conditions and not actual use conditions.
Tychem® LV
Quick Pic
n Heavy chemical
splash protection
n Flexible and
lightweight
n Low-visibility
n Superior fabric
strength
n Chemical Warfare
Agent tested
n Same material as
Tychem® BR but low-
visibility
Tychem® LV166 Tychem® LV260 Tychem® LV450
Tychem® LV coverall, respirator Tychem® LV jacket, drawstring Tychem® LV encapsulated suit
fit hood, double storm flap with hood, zipper, double storm flap (level B), rear entry, expanded
hook and loop closure, elastic with hook and loop closure, back, 20 mil pvc faceshield, 2
face, wrists and ankles. elastic wrists. exhaust ports with shrouds,
Sizes: S – 5XL Sizes: S – 5XL double storm flap with hook and
Case Pack: 6 Case Pack: 6 loop closure, attached sock boots
Case Weight: 9 lbs Case Weight: 8 lbs. with boot flaps, elastic wrists.
Sizes: S – 5XL
Case Pack: 1
Case Weight: 9 lbs
Note: Chemical Resistance Data is in accordance with ASTM F-739 test method. Testing
is performed on fabric samples only, not finished garments. Sources for all test data are
independent laboratory conditions and not actual use conditions.
Heat
Sealed
Seams
Tychem® TK
Tychem® TK 640W Deluxe Quick Pic
Wide-View Level A Suit*
Fully encapsulated front entry vapor-pro- n >480 minute
tective suit (Level A), expanded back, sealed resistance to ASTM
seam plus inside and out, 48” gas tight zip- F1001 test battery
per, double storm flap with hook and loop
closure, 2 layer wide-view faceshield (10 mil
n >12 hour resistance
to chemical warfare
Teflon®/40 mil PVC), Anti-reversing gloves agent
Butyl® and North Silvershield®, 2 exhaust
valves, attached sock boots with boot flaps, n Highest level of
1.5” waist belt with 3 belt loops sewn (inside)
protection amongst
all
and sealed. Storage bag included. Tychem® fabrics
Sizes: S - 5X
Case Pack: 1
Case Weight: 10 lbs.
Also available as rear entry Style TK650W.
*Kevlar® Knit gloves are not included with
garment. They are available as an option.
Tychem® TK450
Encapsulated Suit
Encapsulated suit (Level
B), rear entry, expanded
back, 48” zipper,
storm flap, 20 mil PVC
faceshield, elastic wrists,
2 exhaust ports with
shroud, attached sock
boots with boot flaps.
Sizes: S - 5X
Case Pack: 1
Case Weight: 5 lbs.
Also available as front
entry suit, style TK440.
Tychem® TK260
Jacket, drawstring hood,
zipper, elastic wrists,
double storm flap with
hook and loop closure.
Sizes: S - 5X
Case Pack: 6
Case Weight: 12 lbs.
Options for Level a and b chemical suits Accessories for Level a and b chemical suits
Style Description Style Description
A1 Add 1 side air tube Gloves
B1 Add hook and loop to boot flaps 00001 PVC glove ring
B2 Add boot flaps 00020 25 mil Butyl gloves
F1 Add 10 mil Teflon® faceshield 00021 Viton® gloves
F3 Add 20 mil PVC faceshield 00024 17 mil Butyl glove
F4 Add 40 mil PVC faceshield 00025 North Silvershield® gloves
G5 Seal-tight glove system 00027 Kevlar® knit gloves
G6 North Silvershield® gloves heat sealed to suit
G7 Quick disconnect assembly for gloves Boot Covers and Boots
G8 Replacement quick disconnect outer glove assembly, Butyl® 00045 Onguard EZ Fit Hazmax® boots (NFPA Certified)
(per pair)
G9 Replacement quick disconnect outer glove assembly, Viton® Cooling Vest
(per pair) 00055 Phase Change® Vest, poly cotton outershell
GA Glove O-ring and clamp assembly 00056 Phase Change® Vest, Banox® (FR Cotton) outershell
I1 Inspect, retest and recertify Level A suit* 00057 Set of 4 Phase Change® inserts
I2 Install customer supplied pass-thru
00058 Phase Change® Vest, Nomex® outershell
N1 Add reflective numbers or letters to suit (4 max) each
P1 Scott® pass-thru with Hanson® fittings Storage Bags
P2 Scott ® pass-thru (not NIOSH approved) 00750 Level A storage bag
P4 Survivair® pass-thru with Hanson® fittings 00760 Lakeland Utility Bag (Small)
P6 Draegar pass-thru with Hanson® fittings 00770 Lakeland Utility Bag (Large)
P7 Draegar pass-thru with Foster® fittings
P8 Draegar pass-thru with Snap Tite® fittings Valves
P9 MSA Dual Purpose® pass-thru with Hanson® fittings 00014 Exhaust Valve
P10 MSA Quick Fill® pass-thru
P13 North pass-thru with snap fittings
P14 North pass-thru with Hanson® fittings
P17 MSA Dual Purpose pass-thru with brass Foster fittings
P18 MSA Wall-thru unit
R2 Reinforce crotch and elbows
R3 Reinforce crotch
R4 Reinforce elbows
R5 Reinforce knees
S1 Add sleeve guards
S2 Add double storm flap with hook and loop closure
S3 Add double storm flap with snaps
V1 Add 1 exhaust valve with cover
V2 Add 2 exhaust valves with covers
Z1 Invert zipper on Level A
i l a ble
av a w
Now ide -viem!
in w s syste
len
Heat
Sealed
Seams
Plus
NFPA 1991
certified to
current edition.
Tychem® TK 645 NFPA 1991 Ensemble
Fully encapsulated front entry vapor-
protective suit (Level A), expanded back,
sealed seam plus inside and out, 48”
zipper, double storm flap with hook and
loop closure, 2 layer faceshield (10 mil
Teflon®/40 mil PVC), One Glove® System,
3 exhaust valves, attached sock boots
with boot flaps, 1.5” waist belt with 3 belt
loops sewn (inside) and sealed. Includes
aluminized fiberglass overcover. Storage
bag and Bata Hazmax® boots included. .
Sizes: S - 5X
Case Pack: 1
Case Weight: 30 lbs.
Also available in rear entry Style TK655
Wide-View Front Entry Part Number TK645W
Wide-View Rear Entry Part Number TK655W
Also available in
standard lens, part
number TK648 or TK658.
The steps in this procedure are similar to those found in ASTM F1052-97 Optimum Storage Conditions
“Standard Test Method for Pressure Testing Vapor Protective Ensembles”. A copy Preferably, garments should be stored in a cool, dark, dry location free of dirt
of the standard may be obtained for a fee from ASTM (www.ASTM.org) or by and insects. Sunlight, ozone, high temperatures (>120° F), vehicle exhaust
calling (610) 832-9585. fumes, compression under heavy weights and sharp edges or projections are
The procedure below assumes the use of the Lakeland Pressure Test Kit (P/N some conditions known to degrade the materials in these ensembles. Garments
00010). The pressure test kit consists of: should be stored in boxes, in bags or on hangers.
n Unit with pressure gauge and timer Never step on chemical protective garments. Never place or store heavy objects
on top of chemical garments.
n Exhaust valve adapters
n Hoses which attach the valve fittings to the pressure test kit
n Plugs to block extra valves in NFPA 1991 certified ensembles
Users of other pressure test kits will have to modify the steps by which they
attach the test kit to the garment.
Note: Air and garment temperature can affect the results of this test. If the
temperature of the garment, the air outside the garment, or the air inside the
garment changes during the test, an incorrect result may be obtained. Avoid
circumstances that will heat or cool the garment during the test, such as conducting
the test in the presence of drafts, under air conditioning ducts, or in the presence of
direct sunlight.
Decontamination Solutions
Do not use any oxidative, corrosive or reactive decontamination
solutions with this garment. The only decontamination solutions to use
with this garment are water and mild, household dishwashing liquid.
Field Decontamination
The purpose of field decontamination is to allow the wearer to doff
the garment without being harmed by contaminants on the garment
surface. Garments that have been exposed to or that are suspected
3006/0208 ©Copyright 2006 Lakeland Industries, Inc., all rights reserved. This guide is the exclusive property of Lakeland Industries, Inc.
It may not be copied, duplicated, or reproduced by any means without the written permission of Lakeland Industries, Inc.
Pyrolon® CRFR, ChemMAX® 1, ChemMAX® 2, and ChemMAX® 3 are registered trademarks of Lakeland Industries, Inc.
Tychem® QC, Tychem® SL, Tychem® F, Tychem® BR, Tychem® LV, Tychem® TK, Kevlar®, Nomex®, Butyl®, Teflon®, and Viton® are trademarks of the DuPont Company.
Saranex® is a registered trademark of Dow Chemical.
One Glove® is a registered trademark of Saint-Gobain.
Silvershield® is a registered trademark of North Hand Protection.
Hanson® is a registered trademark of Scott.
Bata Hazmax® is a registered trademark of Bata Shoe Co. Inc.
Phase Change® is a registered trademark of Hypertek Industries, Inc.