Professional Documents
Culture Documents
Supplied Accessories
2 1
Make sure you have the following accessories: Front Front
a Indoor FM antenna speaker R speaker L
a b c
b AM loop antenna
3
c Remote controller and two
Center speaker
batteries (AA/R6)
d Speaker Package d
(Purple)
20 thin rubber stoppers*1 8 thick rubber stoppers*1 Subwoofer Speaker cable 4 floor pads
(For Front/Center/ (For Front/ 3.0 m
Surround speakers) Surround speakers)
Approx. 5 m
Batteries (AA/R6)
Purple Gray Blue
Note
Before connecting the power cord, connect all of your speakers and AV components.
6 Subwoofer
Speaker Configuration
5.1-channel: 1 2 3 4 5 6
En
SN 29401062
(C) Copyright 2012 ONKYO SOUND & VISION CORPORATION Japan. All rights reserved. * 2 9 4 0 1 0 6 2 * -2-
TV HDMI
Game
HDMI IN
OUT
HDMI
OUT
Satellite/cable
set-top box, etc.
The components connected to each terminal (BD/DVD, GAME, etc.) can be selected with the input selector buttons of the same
name on the front panel. Note that these default assignments can be changed. For details, please refer to the instruction manual.
You can connect various Onkyo components to the UNIVERSAL PORT jack.
■ Listening to TV audio (Optional) Dock for iPod UP-A1 HD Radio Tuner UP-HT1 DAB Tuner UP-DT1
TV
AUDIO
OUT
DIGITAL L HDMI
OPTICAL IN
OUT
When using a TV that supports Audio Return Channel,
R The Onkyo Universal Port Options are sold separately and their availability depend on the region.
both audio/video signals from the AV receiver and the
audio output from the TV are carried bi-directionally
on a single HDMI cable.
-3- -4-
1 2 1 2
Home
I npu t
Aud i o
AM
FM
Menu
I nfo TV CD
L i s t e n i n g Mode PORT 1. HDMI Input BD/DVD
[ E n t e r : Se l e c t ] 2. Component VCR/DVR
3. Digital Audio CBL/SAT
4. Sp Config GAME
■ Navigating through the menus
5. Sp Distance AUX
6. Level Cal TUNER
7. Audio Adjust TV/CD
8. Source Setup PORT
1 1 Turn on the AV receiver. 9. Hardware
10. HDMI Setup
4 5 Select a listening mode and enjoy! controls, the subwoofer and center channel levels.
Info
You can view various information about the currently
selected input source. ■ Returning to the main menu
Listening Mode
You can select the listening modes that are grouped in
categories.
■ Closing the menu ■ Closing the menu
Note
• This procedure can also be performed on the AV receiver by
using SETUP, the cursor buttons, and ENTER.
-5- -6-
a Sets the AV receiver to On or Standby. k Accesses the setup menus. The AV receiver turns off unexpectedly.
b Lights when the HDMI through function is enabled. l When the AM or FM input source is selected, w TUNING q are The AV receiver will automatically enter standby mode when Auto Standby is set
c You can use two sets of front speakers with the AV receiver: used to tune the tuner, and e PRESET r are used to select and launched.
Speakers A for up to 5.1-channel playback in your main radio presets. g
listening room and Speakers B for 2-channel stereo playback When used with onscreen menus, they work as cursor buttons There's no sound, or it's very quiet.
in another room. to select and set items. ENTER is also used with
Make sure that the proper digital source is selected.
d The remote control sensor receives signals from the onscreen menus.
remote controller. m Returns to the previous menu.
e Selects listening modes. n.Adjusts the volume.
There's no picture.
f Displays various information. o The Music Optimizer function enhances the sound quality of Make sure that all video connecting plugs are pushed in all the way.
g RT/PTY/TP: Used for RDS (Radio Data System) compressed music files.
RDS works only in areas where RDS broadcasts are available. p Connects a standard pair of stereo headphones. h n If you can't resolve the issue yourself, try resetting the AV receiver before
h Stores or deletes radio presets. q Adjusts the tone. contacting your Onkyo dealer.
i Selects the Auto or Manual tuning mode. r Selects the input sources. To reset the AV receiver to its factory defaults, turn it on and, while holding down
VCR/DVR, press 8 ON/STANDBY. “Clear” will appear on the AV receiver's
j Displays various information about the currently selected s Connects a camcorder or similar for audio/video playback.
display and the AV receiver will enter standby mode.
input source.
Note that resetting the AV receiver will delete your radio presets and custom
settings.
Tel: 852-2429-3118
Tel: 800-229-1687, 201-785-2600
http://www.onkyochina.com/
http://www.us.onkyo.com/
Tel: 86-21-52131366
Tel: +49-8142-4401-0 http://www.cn.onkyo.com/
http://www.eu.onkyo.com/
-7-