Professional Documents
Culture Documents
TITAN
double-shaft
hammer
crushers
The perfect crushers for
the cement industry
2 TITAN double-shaft hammer crushers 3
From top:
Perfect material
thanks to
rotating hammers
In double-shaft hammer
crushers, the crushing of
the feed material is mainly
performed by the rotating
hammers between the
rotors and on the anvil.
It is important to note that the material is not ground on the grate Hammer axle extraction device
baskets. The product size is regulated by different-sized gaps, allow- To reduce maintenance time, every TITAN double-shaft hammer
ing raw material to be produced for either ball mills (0/25 mm) or crusher is equipped with a hammer axle extraction device that
roller mills (0/80 mm). allows the hammers to be changed completely in only one shift.
Today, thyssenkrupp TITAN crushers are equipped with cast or
Five-axle rotor patented by thyssenkrupp forged hammers that are tailored to the respective job in hand in
Based on its long operating experience, thyssenkrupp has devel- order to reduce wear and extend their service lives.
oped a new rotor concept for its TITAN crushers with a hammer
circle diameter of 2 meters. The number of hammer axles has Grate basket trolleys
been reduced from six to five. This modified design optimizes pen- It is very easy to change the grate baskets under the rotor of TITAN
etration of the lumps of material into the hammer circle, resulting crushers as the shells are fitted with side doors which can be
in a quick, aggressive crushing process. This new system prevents opened wide to allow a hydraulically operated grate basket trolley
the stones from gathering on the rotor and blocking the crusher. to be used.
In addition, with the new geometry of the pentagonal rotor shafts
and the modified discs, it has been possible to increase the weight
of the hammers, resulting in greater crushing forces and an opti-
mized wear volume of the hammers. You thus benefit from a higher
throughput rate coupled with lower operating and maintenance
costs.
From top: From top:
Five-axle rotor for a TITAN crusher, type 80D160 Hammer axle extraction device for TITAN crusher, type 96D180
TITAN double-shaft hammer crusher with grate basket TITAN crusher, type 80D160, with hammer axle extraction device
carrier
Grate basket trolley
Pentagonal rotor shaft for a TITAN crusher, type 60D160
6 TITAN double-shaft hammer crushers 7
RT 014/2/e/1000/201709/SZ/Printed in Germany