Professional Documents
Culture Documents
- 100
STRENGTH
ENJOY BUILDING WITH US!
The exceptional gutter wall thickness 120
guarantees over two times higher strength
and impact resistance compared
65
to competitive products.
Side rafter bracket
- 100
STATEOFTHEART UV PROTECTION
www.devorex.com
Components of system CLASSIC Components of system CLASSIC INSTALLATION MANUAL IN 4 EASY STEPS
1
CLASSIC 120 Gutter - 3m CLASSIC 120 Gutter stopend RAINPIPE 80 Bend 67.5
white white white
beige beige beige
terracotta terracotta terracotta
bordeau bordeau bordeau
brown
10 brown
20 brown
20
grey grey grey
black black black
copper copper copper 1. Install the running outlet, considering the position of the drain pipe and the slope direction of the gutter. Using a straight pulled cord, set the slope gradient and install the gutter
brackets, beginning with the furthest from the running outlet. The distance between two gutter brackets should be maximum 50 cm, and between a gutter bracket and another
element (running outlet, union, angle or stopend) maximum 10 cm. Use 5x30 mm screws (for wood) to fix all elements, featuring fascia fixture holes, to the roof fascia.
CLASSIC 120 Gutter angle 90 CLASSIC 120 Gutter fascia bracket RAINPIPE 80 Bend 87.5
white white white
2 3
beige beige beige
terracotta terracotta terracotta
bordeau bordeau bordeau
brown
20 brown
100 brown
20 SI
LP
AS
TA
grey grey grey
black black black
The application of lubricant SILPASTA on the silicon gaskets of Fix each rafter
copper copper copper all gutter connecting elements is highly recommended!!! bracket with two screws 5x30 mm (for wood) to the roof ribs.
2. In order to install the gutter, first insert the internal edge of the profile accordingly , adjust the gutter end to match 3. When installing the system on roof ribs, use side or top
the indicating line in the fitting , thus providing space for the thermal expansions and contractions and finally twist & rafter brackets. Use bolt and nut M6 (pos. 16) with the
CLASSIC 120 Adj. Gutter angle 60-160 RAINPIPE 80 Pipe - 3m RAINPIPE 80 Ending bend snap the external edge of the gutter profile for firm fixture in each bracket and/or connecting element. NO gluing of gutter and rafter brackets, in order to easily adjust the
white white white the gutter elements. required gutter slope.
beige beige beige
terracotta terracotta terracotta
bordeau bordeau bordeau
DESIGN
brown
10 brown
4 brown
8 Roof drainage system design should be performed by an authorized and experienced designer, considering the requirements of EN
grey grey grey
4 Use screws M6, of type 12056-3 and strictly following all national and local building codes and standards. The product is fit for rainwater handling from the
and length, compatible
black black black roofs of residential, administrative and light industry buildings.
with the type of mounting WARNING!!! In cases of installations on roofs of buildings in regions, susceptible to formation of snow and/or ice cover, please install
copper copper copper wall surface. suitable ice/snow protection fixtures on the roof, in order to prevent falling of ice/snow and serious damage to people and property.
Distances between roofing tiles and gutters Calculating Effective Roof Rainfall Area
CLASSIC 120 Running outlet 80 RAINPIPE 80 Branch 67.5 RAINPIPE 80 Pipe connector
white white white
beige beige beige
terracotta terracotta terracotta
bordeau bordeau bordeau
brown
20 brown
20 brown
20
For connecting pipes - use
grey grey grey connector 80 (pos. 14).
black black black
copper copper copper The roofing tiles should be positioned according to the The running outlet should be positioned minimum
picture above. 10 m away from the beginning of the slope.