Professional Documents
Culture Documents
C-AJ-2324
T Rating 2 & 2-3/4 Hr (See Item 2)
1. Floor or Wall Assembly Min 4-1/2 in. thick reinforced lightweight or normal weight (100-150
pcf) concrete floor or min 5 in. thick reinforced lightweight or normal weight concrete wall. Wall
may also be constructed of any UL Classified Concrete Blocks*. Max diam of opening is 7 in.
See Concrete Blocks (CAZT) category in the Fire Resistance Directory for names of
manufacturers.
09/16 (1)
Continued C-AJ-2324
B. Packing Material Min 4 in. thickness of min 4 pcf mineral wool batt insulation firmly
packed into opening as a permanent form, flush with bottom surface of floor assembly or
both sides of wall. Packing material to be recessed from top surface of floor or both
surfaces of wall assembly to accommodate the required thickness of fill material.
C. Fill Void or Cavity Material* Sealant Min 1/2 in. thickness of fill material applied within
annulus, flush with top surface of floor or both surfaces of the wall assembly. At point
contact location between penetrant and periphery of opening, an additional 1/2 in. diam
bead of fill material shall be applied at the concrete penetrant interface on top surface of
floor assembly.
Passive Fire Protection Partners 3600EX, 4800DW
09/16 (2)