Professional Documents
Culture Documents
www.commonsound.org To Bypass switch (if Drum trigs and Bypass switch mod)
(see license for use) v1.0 20041118
Mod V+ jumper
Cut traces
for Bypass
switch with
Drum trig
Drum trig 555V+ jumpers mods.
C
LI
Bypass switch (with Drum trig): Drum Trig On/off
FF
1. Leave the "Bypass switch" jumper in. (SPDT flip)
2. Cut the two traces shown (see diagram)
3. Run a wire from Drum Trig B's 4558 pin 8 to Bypass switch input jack
4. Run a wire from the "Bypass switch" jumper to the Bypass switch
5. (If ring mod and/or Aux Vol/blend mod...) put in the Mod V+ jumper output jack
to mod board
to ground
to ground
(sens B) (on powerjack
or on board)