Professional Documents
Culture Documents
1
Who should participate?
This program is developed for the following selected STAFFS within
the organization of various levels which include;
Graduate Engineers- Engineers with 1-5years experiences, the
organization can groom and develop their interest in subsea
engineering and make them an expert in this filed in the nearest
future.
Mid-level Engineers- Engineers with over 5 years experience but not
more than 10 who will are interested in the design, construction, and
operation of subsea systems.
Senior Engineers- Engineers with over 10 years experience but not
more that 17 years. They have are experienced in other offshore
engineering fields, there experience will be an added advantage to
the team of subsea Engineers that will be groomed.
Top Management- Theses are management members who
understand the and have experience in various offshore project and
will be assisting the team to develop their technical and management
skills in subsea engineering management in future.
Training Methodology
Training setup shall undertake the classroom style of training at designat-
ed clients training facilities (if clients request we can provide a the training
location)
At Clients Location
Chevron shall make available a training room fully equipped with projectors
and all other training facilities needed for the smooth running of the
training.
Facilitation: One key instructor and one assistant for each session. The
proposed training providers are experienced providers with vast knowledge
in the Sub Sea Engineering within and outside Nigeria
The training course will be a combination of lectures, interactive and
workshop-style sessions, continuous assessment and tutorials.
COURSE CONTENT
Day One
Introduction to Subsea Engineering
Field Development Planning
Development Strategies
System Engineering
Floating Production Systems
Day Two
Introduction to Subsea Completion
Subsea Wellheads and Trees,
Subsea Manifolds and Tie-ins Systems
Day Three
Flowline and Riser Design and Installation Methods
Subsea Control Distribution System
Umbilicals Electrical Distribution Systems
Electrical Distribution Systems
Control Fluids Considerations
Day Four
Flow Assurance
Subsea Processing
Subsea Well Intervention
Subsea System Intervention
ROV Intervention
Day Five
Decommissioning
FIELD DEVELOPMENT EXERCISE (INTERACTIVE)
Stage 2 Summary;
At this stage of the program we intend to make participants more
specialize in different subsea fields mentioned above. We believe stage one
participant would have identified area of interest in the subsea sector of the 2
oil and gas industry.
INTRODUCTION TO SUBSEA CONSTRUCTION AND
PLANNING
This course will enable project engineers have an overview of the life cycle of
subsea construction projects ffrom contracting strategy to achieving mechanical
completion. Athe end of the program, participants would have achieved the
following;
Learning Outcomes
1. Gain an understanding of the basic principles of Offshore & Subsea Operations.
2. Gain an appreciation of operational and construction sequencing.
3. Gain an understanding of project phases.
4. Understand selection of vessels & construction
INTRODUCTION TO PIPELAY
This course will enable project engineers have an overview of the key elements of pipelay
operaions. It will equip them with the right type of knowledge to better manager pipelay
projects with insttallation contractors. At the end of the program, participants would
have achieved the following;
Learning Outcomes
1. Gain understanding of pipelay methods
2. Gain understanding of installation requirements during design
3. Gain awareness of installation constraints
4. Gain understanding of pipe construction operations offshore
Learning Outcomes
1. Understand basics and fundamentals of Petroleum Engineering
2. Data Acquisition, Processes, Methodology and uses.
3. Understand basics of Seismology and Production Geology
4. Understand basics of Reservoir Engineering and Simulation
5. Understand basics of Production Technology
6. Understand basics of Petrophysics and Formation Evaluation
3
SAFE OPERATION OF INSTALLATION
This course summarizes a program to enable Engineers as well as non-Engineering
personnel to understand and appreciate safety of Production Facilities as an integrated
effort towards a unified solution. At the end of the program, participants would have
achieved the following:
Learning Outcomes
1. Understand basics and fundamentals of Production Facilities
2. Understand basics of Offshore Installations and Safety needs
3. Understand basics of Subsea Control Systems
4. Understand basics of Subsea Intervention
5. Overview of basics of Subsea Operations
Learning Outcomes
1. Understand basics and fundamentals of Pipeline Engineering
2. Understand basics of Flowline Designs
3. Understand basics of Flow Assurance in Subsea Environments
4. Understand concepts of Active and Passive Design Considerations.
5. Overview of basics of Subsea Operations
Learning Outcomes
1. Understand basics and fundamentals of Subsea Intervention technologies
2. Understand basics of Subsea Intervention Planning
3. Understand basics of Subsea intervention methods and safety considerations
4
Design, Transport and Installation of Subsea Structures
This course summarizes a program to enable Engineers gain an
awareness about transport and installation subsea structures. At the
end of the program, participants would have achieved the following:
Learning Outcomes
5
Learning that tames the seas