You are on page 1of 2

The purpose of this guide is to provide the

GPS NAVIGATOR basic operation for this equipment. For more

GP-170
detailed information, see the Operator's Manual.
All brand and product names are trademarks,
English Model Operator's Guide registered trademarks or service marks of their
respective holders.

How to operate the main menu

NU/CU
then ENT then NU/CU
ENT

MENU OR OR MENU
ESC ESC

DISPLAY
1 ~ CENTER
8
CURSOR
ON/OFF 0 ~ ZOOM
OUT 9
(numeric key)
Press appropriate numeric key. If needed, repeat one of these steps.

How to switch the Shifts display or cursor. How to open the context menu
operation mode Goes back
Select the menu item. For example, context menu for a mark.
NU/CU
ENT NU: North up one layer in
CU: Course up multi-layer Goes forward to one
menu. layer in multi-layer menu.

How to adjust the brilliance of the display and panel

Display brilliance

BRILL MENU
ESC

Panel brilliance Select a mark with the cursorpad.

How to turn the


How to open the list power on/off

LIST LIST LIST

Mark List Route List Station List


(Requires internal beacon receiver.)
ROUTE GO TO
2 : Create a new route. 3 : Set a destination.

ROUTE NU/CU ROUTE GO TO


2 ENT 2 3

Long press Select the location for a route point. Select the location
Repeat these steps to complete the route. for a destination.

MARK
MOB
4 : Set MOB as destination. EVENT 5 : Put a mark.
With cursor on
MOB
4
Select [1 Yes].
MARK
EVENT 5
- Acknowledges an unacknowledged alert.
ACK
DELETE - Deletes all setting values on the setting window. Select the location for a mark.
PLOT : Plot and record ships track.
- Deletes registered data at the cursor-selected position. ON/OFF 6
With cursor off
MARK
CURSOR ZOOM - Selects and confirms the menu item. PLOT The pop-up message Resuming EVENT 5 The mark is put at own ships position.
ON/OFF 0 to OUT 9
ON/OFF 6
Track Plot appears.
- Enters a numeric character.
To stop plotting,
CURSOR
ON/OFF 0 : Turn the cursor on/off. PLOT The pop-up message Stopping CENTER
: Center the cursor position or own ships position.
ON/OFF 6 8
Track Plot appears.
With cursor on
CENTER
Center the cursor position.
CURSOR 8
ON/OFF 0 ZOOM ZOOM
IN 7 OUT 9 : Zoom in/out the display. With cursor off
Zoom in Zoom out Center own ships position.
Cursor on: Large Cursor on: Small ZOOM ZOOM
(Size selectable from menu.) IN 7 OUT 9

DISPLAY
1 : Select the display mode.

Plotter Integrity Highway Course Data

DISPLAY DISPLAY DISPLAY DISPLAY DISPLAY


1 1 1 1 1

PUB. NO. OSE-44820-A


(1406, YOTA) GP-170
00017791110

You might also like