You are on page 1of 2

CURING COMPOUND LN 353

Polymeric Emulsion based, white pigmented Concrete Curing Compound

DESCRIPTION APPLICATION
CURING COMPOUND LN 353 is a ready to use, curing Use CURING COMPOUND LN 353 as supplied without
compound based on selected polymeric emulsion, which dilution. Stir well before use ( rolling drum containing the
when applied on to freshly placed concrete surfaces product is an effective method ). It should be applied
provides an efficient curing membrane with excellent non after the final finishing operation as soon as the concrete
yellowing properties. Complies with ASTM C 309 type 2 or mortar surface has hardened sufficiently to prevent
and AASHTO M 148. marring.
Delaying the application until the next day will allow
RECOMMENDED FOR substantial loss of moisture reducing the effectiveness of
the curing membrane.
CURING COMPOUND LN 353 is suitable for curing all For best results, apply an even coat by a low pressure
general purpose freshly placed concrete and mortar, Spray equipment (knapsack sprayer) or a wide short nap
both indoors and outdoors. It is particularly useful in roller, or brush. With all methods, take adequate care to
large areas of exposed concrete where solar reflective prevent marring of concrete surface.
membrane is preferred, such as; Apply the curing compound evenly on all exposed
Concrete floors concrete surfaces.
Highways, runways, taxiways, apron
ESTIMATING DATA
FEATURES AND BENEFITS
Actual coverage depends upon the method of
Greater moisture Facilitates more efficient application, the texture and porosity of the surface. As a
retention in mortar hydration of cement for guide, coverage on a smooth dense surface will be
and concrete greater strength and superior approximately 7 m2/L, while for a porous, rough surface
wear resistance. it will be approximately 5 m2/L.
Non staining Suitable for exposed PACKAGING
architectural concrete.
White pigmented Reduce heat on concrete CURING COMPOUND LN 353 is available in 20 L pails
surface from intense sunlight. and 205 L drums. CURING COMPOUND LN 353 can be
Treated area easily identified stored in tightly sealed original containers for 12 months
from date of manufacture at constant temperature.
PROPERTIES
PRECAUTIONS
Supply form : liquid
Health : CURING COMPOUND LN 353 is non toxic but
Colour : white can cause irritation to persons with sensitive skin if
Specific gravity : 1.0 kg/l exposed and respiratory reaction if inhaled.
Safety : Wear eye protection, gloves and mask while
handling the product. Wash thoroughly after handling.
In case of accidental eye contact wash with copious
amount of water and seek medical help.
If ingested drink a glass of water and do not induce
vomiting. Consult doctor immediately
Fire : Not flammable.

For detailed Health, Safety and Environmental


Recommendations, please consult and follow all
instructions on the product Material Safety Data Sheet.
I CCLN353/01/0604

Head Office Factories Representative Offices


Plaza GRI 10th & 11th Floor Jl. Daan Mogot Km.14 Jl. Jababeka V Blok I-1 Grand Residence Office Park, Komp. Pertokoan Royal Sunggal
Jl. HR Rasuna Said Blok X-2 No.1 Cengkareng, Cikarang Industrial Estate 1st Floor Jl. Gagak Hitam No. A-12
Jakarta 12950 Jakarta 11750 Bekasi 17530 Jl. Darmo Harapan Complex 1 Ring Road Sunggal
Tel.: (6221) 5262481, 5262505 Tel.: (6221) 6190007 Tel.: (6221) 8934339 Surabaya 60187 Medan, Sumatera Utara 20128
Fax: (6221) 5262493, 5262515 Fax: (6221) 6190741 Fax: (6221) 8934342 Tel.: (6231) 7326705 Tel.: (6261) 8447110
Fax: (6231) 7326730 Fax: (6261) 8444072
CURING COMPOUND LN 353

The technical information and application advice given in this BASF Construction Chemicals
publication are based on the present state of our best scientific and practical knowledge. As the
STATEMENT OF information herein is of a general nature, no assumption can be made as to a product's suitability for a
RESPONSIBILITY particular use or application and no warranty as to its accuracy, reliability or completeness either
expressed or implied is given other than those required by law. The user is responsible for checking the
suitability of products for their intended use.
Field service where provided does not constitute supervisory responsibility. Suggestions made by
BASF Construction Chemicals either orally or in writing may be followed, modified or rejected by the
NOTE owner, engineer or contractor since they, and not BASF Construction Chemicals, are responsible for
carrying out procedures appropriate to a specific application.

You might also like