Product Information
DOW CORNING® 3-6077 RTV
Silicone ablative
FEATURES ‘Two part, non-slumping silicone elastomer
+ Withstand empertares om
55°C to +200"C overextended
perio andupwe doctor APPLICATIONS
Sever inte * Can be wed as an ablative coating a thermal bare anda high temperature
presurisation sealants primary use is inthe protectin of launch strictures
exposed fo direct rocket blast and is easily removable aftr charsng, for
‘ecoating.Itcanalso be used for rocket liner applications
* Developed forthe aerospace industry.
+ Moderately tough char
characteristics
+ Surface easily cleaned and
re-coated
+ Low thermal conductivity TYPICAL PROPERTIES
* Good dielecrical properties ‘Specification vrters: These values are not intend fo se in preparing specifications.
+ Flexbity and service at Please conact yout lacal Dow Coming sales representative prio o writing specifications
temperature extremes fn this product.
+ Can be sprayed and trowelled THE AST Property ae he
+ Two part room temperature cure As supplied
Consistency Viscous liquid
Colour -haseea WhiterBiue
0050 D108 Viscosity at 25°C (base) mPas 1,800,000
Mixing ato by weight wt
Catalysed, Mixed 10:1 by weight (Base/Catalyst)
Relative density at 25°C 158
Care ime a 25°C hows 28
Physical properties, cured 7 days at room temperature
137A D412 Tensile strength MPs 42
0137A D412 Blongation a break % 0
0099 12240 Durometer hades, Shore A B
Deep section cure - 25min thickness Yes
‘Thermal conductivity Wink) 029
Specific heat at 25°C kikgK 104
Ablation, Oxy-acetylene torch, 45 watts?
Penetration rate mms 0035
Char eention Fair
* CINE Comporate Test Method, copies of CTMs are avalable on request
ASTM: American Society for Testing ane Materials.
HOW TO USE titanium and aluminium, ft does not
adhere well to polyethylene, certain
Substrate preparation plastics o organic materi including
DOW CORNING 3.6077 RTV rubber, which bleed or exude
Silicone Ablative adheres well to plasticisers.
roost materials. Typical materials
Incl glass, ered silicone ret, Subganialy stronger and more
ork, phenol, polyester, epoxy tnform: bons are obtained by
silicone resin laminates. and most faces with
s preparing surfaces wit
metals including stainless tel BOW CORNING® 1200 Primer. Rorbes 2 ss, the following steps
shor “take followed on all surfaces:
1. Cea the surface with a chlorinated
sol ensee Handling Precautions)
and Asahi abrasive pad ora coarse
lini~ recto
2. Anscleaned surface with acetone
or ete ethyl Ketone.
3. A. pth thin coat of primer by
digg Ig Deushing or spraying
4. AI Lovthe primer to dry for at least
Tho €4r,eceding to relative humidity
5. Si Lieve rubber surfaces should not
nom alljbe primed, bit only
roug Fea slightly with abrasive
pape a abi rinsed with acetone. In thin
Secti 211 primer may be needed
Mixing
DOW CIRNING 3.6077 RTV
Silice> ne tblative is added in a ratio of
{pare ofoaialyst, by weight, to 10
parts of bese material. The catalyst
nay Loe dipersed by 210 5 minutes of
hand ruistg or approximately 25,
cycless_ofe mechanical mixer, such as
the Se me? Pressure Mixer, model
$135.0 oS-1378,
How toapply
After cataystadeition,
DOW COINING 3.607 RTV
Silicorxe Ailaive may be applied with
aspattala «loaded into cartridges and
applieed fran a pressure gun. The
appliecl muierial may be cevorked io
any corifigeation. Masking tape may
he usec to:dtain neat fillets oF to
control exes. The tape should be
removeed Ixfore a surface skin Forms
Uncured exes may be removed with
sylene, tolvene or similiar aromatic
solvents,
Working and cure time
Av normal tom temperature
approxi matily 25°C,
DOW CORNING 3.6077 RTV
Silicones Ab&tive remains workable
tor 2-3 hoursatier the catalyst
Addition with ull core in 24 hours
Workings tie may be extended by
mnixing. handling and applying the
mixture at Tow temperate,
HAND LING PRECAUTIONS
PRODUCT SAFETY
INFORMATION REQUIRED FOR
SAFE USE ISNOT INCLUDED.
BEFORE HANDLING, READ
PRODUCT AND SAFETY DATA
‘SHEETS AND CONTAINER
LABELS FOR SAPE USE,
PHYSICAL AND HEALTH
HAZARD INFORMATION, THE
SAFETY DATA SHEET IS.
AVAILABLE FROM YOUR LOCAL
DOW CORNING SALES
REPRESENTATIVE,
USABLE LIFE AND
STORAGE
Wien stored at or below 32°C°C in
the original unopened containers
DOW CORNING 3.6077 RTV
Silicone Ablative has a usable life of
12 months from the date of
production.
PACKAGING
DOW CORNING 3.6077 RTV
Silicone Abtative is available in Skg
kits,
LIMITATIONS.
‘This product is nelther tested nor
‘represented as suitable for medical or
pharmaceutical uses,
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product
safety needs, Dow Corning has an
extensive Product Stewardship
‘organization and a team of Health,
Environment and Regulatory Affairs
specialists available in each area
For further information, please
consult your local Dow Corning,
representative,
WARRANTY
INFORMATION - PLEASE.
READ CAREFULLY
‘The information contained herein is
offered in good faith and is believed
fo be accurate. However, because
Conditions and methods of use of our
Products are beyond our control. this
Information should not be used in
substitution for customer's tests to
‘ensure that Dow Coming’s products
ate safe, effective, and fully
satisfactory for the intended end use.
Dow Coming’s sole warranty is that
the product will meet the
Dow Corning sales specifications in
effect atthe tine of shipment. Your
‘exclusive remedy for breach of such
‘Warranty is limited to refund of
purchase price or replacement of any
product shovin to be other than as
Warranted, Dow Corning specifically
disclaims any other express or implied
‘warranty of fitness fora particular
pparpose or merchantability. Unless
Dow Corning provides you with a
specific, duly signed endorsement of
fines for use, Dow Comming,
disclaims lability for any incidental
or consequential damages,
Suggestions of use shall not be taken
a5 inducements to infringe any patent