Professional Documents
Culture Documents
Item Pipe
Item Description Unit
No. Culvert
Earthwork in excavation for foundation in structure including
5.01 all leads and lifts as per drawing and Technical specifications Cum 4043.47
clause no 304
Providing Back filling behind abutments, wing walls and return
walls, with selected imported granular material of approved
5.02 Cum 787.09
quality including all leads and lifts complete as per Technical
Specification Clause 305.
Filter media behind abutments,wing walls and return walls
5.03 complete with all leads and lifts as per drawing and Technical Cum
Specification Clause 2200
Length of
Pipes
pipe
1.2 m dia -
1.0 m dia -
0.9 m dia -
QUANTITY ESTIMATION FOR PIPE CULVERTS
6.98 14
6.98 14
6.98 14
6.98 14
6.98 14
6.98 14
6.98 14
8.33 54
6.98 14
6.98 14
8.33 54
8.33 54
8.33 54
6.98 14
8.33 54
8.33 54
6.98 13
6.98 13
8.33 52
6.98 13
6.98 13
6.98 13
6.98 13
6.98 13
6.98 13
6.98 13
6.98 13
6.98 13
6.98 13
6.98 13
8.33 52
6.98 13
6.98 13
6.98 13
241.14 763.00
QUANTITY ESTIMATION FOR Pipe CULVERTS
Sl. No. Design Type of Structure Recomm Widening Span Arrangement Dia of No of
Chainage endation Pipe (m) Rows
(Km)
19.6 29.2 9.6 New 11.70 0.45 11.70 0.00 0.00 0.00
PCC M15 Head wall Granular Length of 300 thick 300 thick Filter No. of
(m3) M15 (m3) material Pipe (m) apron stone Material Pipes of
(m3) pitching (m3) 2.5m
length
5.02
5.03
5.04
5.05
5.06
5.07
5.08
5.09
5.10
5.11
5.12
5.13
5.14
5.15
5.16
5.17
5.18
5.19
5.20
5.21
5.22
5.23
5.24
5.25
5.26
Abstruct of BOX CULVERTS
Item Description
Earthwork in excavation for foundation in structure including all leads and lifts as per drawing and
Technical specifications clause no 304
Providing Back filling behind abutments, wing walls and return walls, with selected imported granular
material of approved quality including all leads and lifts complete as per Technical Specification Clause
305.
Filter media behind abutments,wing walls and return walls complete with all leads and lifts as per drawing
and Technical Specification Clause 2200
Providing and laying in position Plain Cement Concrete of Grade M -15 in levelling course below open
foundations, abutment, pile caps, approach slabs, retaning wall , wing wall,box structure ,curtain wall, floor
apron as per drawings and Technical Specifications Sections 1700 and 2700
Providing and laying in position Plain/ Reinforced cement concrete for foundations and substructure
excluding cost of steel complete as per drawing and Technical Specifications Section 1500,1700, 2100 &
2200
a) M15 grade
b) M 20 grade
c) M25 grade
d) CRM
Providing and laying Reinforced cement concrete for box / slab culverts in superstructure excluding cost of
steel complete as per drawing and Technical Specifications Sections 1500, 1700 and 2300
a) M 25 grade
Providing and laying Head Wall of Pipe culvert/ Abutment/Pier/ Wing walls of culverts of Brick Masonary/
Stone masonary parapet etc.as per drawing and Technical Specifications and as per direction of the
Engineer
HYSD bar reinforcement complete for foundation, substructure and superstructure as per drawing and
Technical Specification clause no 1600.
Providing and laying Stone pitching/Apron complete as per drawings and Technical Specification 2504
Providing and laying filter media below stone pitching/ apron complete as per, Technical Specification
Clause 2504
Providing weep holes in abutments, wing walls and return walls complete as per drawing and Technical
Specification 2706.
Providing and fixing Asphaltic plug type expansion joints complete as per drawing and Technical
Specifications Section 2600.
Painting culvert No. complete as per Technical specification section 800
Providing and laying selected granular material for pipe bedding as per drawing and technical specification
clause 2904
Providing, laying and jointing NP-4 (as per IS: 458-1988) Hume pipes for culverts complete as per drawing
and technical specification section 2900 and IRC : SP : 13-1973.
a) 600 dia
b) 750 dia
c) 900 dia
d) 1000 dia
e) 1200 dia
Providing and fixing in position drainage spouts complete as per drawings and Technical Specifications
Clause 2705 .
Providing and laying tar paper bearing complete as per IS-1398 & Technical Specification section 2000 .
M20 RCC Precast Guard Stone in M15 Foundation Block as per drawing and technical specification section
1700
Cement plaster 12mm thick in cement mortar 1:3 complete as per drawing and Technical Specifications
Section 1000 and 1300 and as directed by the Engineer
Dismantling structures (superstructure, substructure, foundation and other miscellaneous structures),
dismantling of pavements as per Technical Specification Clause 202, section 2800
a) Brick/ Stone masonary
b) PCC
c) RCC
d) RCC Pipe
1000 thick flexible stone apron as per Clause No. 2503.1 of MOST specification and as per direction of the
Engineer
150 mm thick Flat stone apron embedded in 300 thick M15 concrete as per Clause No. 2505.2 of MOST
specification and as per direction of the Engineer
Providing Reinforced Cement Concrete M 30 grade in approach slabs including reinforcement complete as
per drawings and Technical Specifications 1500,1600 and 1700 & 2704
Providing and laying 25 mm thick mastic asphalt wearing course on top of deck slab excluding
prime coat with paving grade bitumen meeting the requirements given in table 500-29, prepared
by using mastic cooker and laid to required level and slope after cleaning the surface, including
providing antiskid surface with bitumen precoated fine grained hard stone chipping of 9.5 mm
nominal size at the rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm center
to center in both directions, pressed into surface when the temperature of surfaces not less than
100 deg. C, protruding 1 mm to 4 mm over mastic surface, all complete as per clause 515 &
2702.
Construction of precast RCC railing of M30 Grade including steel (Concrete 0.085 Cum/Rmt and steel 18
Kg/Rmt),
Providing and fixing 80mm NB MS pipe rail on crash barrier complete including providing three or more
coats of epoxy paint of approved colour, make and quality over a coat of epoxy primer complete as per
drawings and Technical Specifications Sections 1900
Unit Box Culvert Total Qty
Cum
MT 307 307
Cum 926 926
Cum 463 463
Lm 0 0
Nr. 82 82
Cum
Lm
Lm
Lm
Lm
Lm
Lm
Nr. 82 82
Sqm 0 0
Nr.
Sqm
Cum
Cum
Cum 0 0
Lm
Cum 2207 2207
Lm 361 361
Lm 0 0
QUANTITY ESTIMATION FOR BOX C
Box Dimensions
Required
No. of No. of
S.No Design span length
CA proposal Proposal structures cells L (Width)
Chainage (m)
Box Culvert
Box Dimensions
PCC M15
Earth RCC M25
t2 (Top Intermediat work exc. (levelling (for raft)
t3 (Base t1 (Wall course)
H (Ht) a (Offset) slab e wall (m3) (m3)
slab thick) thick) (m3)
thick) thickness
1 2 3 4 5 6 7 8 9 10 11 12
24 153+675 HPC
28 150+890 HPC
Four lan
48 132+394 HPC
(Km 185.150 to Km 134.400) including Rehabilitation of existing Four Lane from Km 134.400 to Km 129.600 in the State of West Ben
55.52Kms) on EPC mode
INVENTORY AND CONDITION SURVERY FOR CULVERTS
Condition of various features of culvert Height above Bed Level Material
Overall
Parapet Condition
Slab/Pipe/Box/Ar Wing Return
Head wall Head U/S side (m) D/S side (m) Super Structure
ch wall wall
railling
13 14 15 16 17 18 19 20 21
Poor Poor
Poor Poor
Poor Poor
Poor Poor
Poor Poor
Poor Poor
Fair Poor
Fair Fair 1
Poor Poor
Fair
Poor Poor
Poor Poor
Poor Poor
Poor Poor
Fair Poor 1
Choked
Poor Poor Poor 2
Fair Poor
Fair Poor
our Lane from Km 134.400 to Km 129.600 in the State of West Bengal (design length
22 23
No headwall and no
Reconstruction-Pipe
parapet on both side
Headwall broken on
Reconstruction-Pipe R.H.S and no visibility
on L.H.S
No proper visibility on
Reconstruction-Pipe both side and poor
condition
Reconstruction-Pipe Choked
Reconstruction-Box Poor condition
Not found
Bill of Quantities
Project :
42
Bill of Quantities
BILL No 5
5.01 304
5.02 304
5.04 1400
2900 &
5.05
IRC SP-13
5.06 2904
5.07 1400
1500, 1700,
5.09
2100, 2200
1500, 1700,
5.10 2100, 2200 &
2300
43
Bill of Quantities
1500, 1700,
5.11
2100, 2200
1500, 1700,
5.12
2100
1500, 1700,
5.14
2300 & 2700
44
Bill of Quantities
5.15 1600
1500, 1700,
5.17
2300 & 2704
5.18 2600
5.19 2700
5.20 2500
5.21 2504
5.22 2504
5.23 2503
5.24 2505
5.25 1300
2011
5.26
IS 1398
1500, 1600,
5.27
1700 & 2703
809, 1500,
5.28 1600 & 1700
IRC-6
45
Bill of Quantities
5.29 2705
5.30 IRC:7-1971
5.31
46
Bill of Quantities
47
Bill of Quantities
i) All types of soil, including backfilling up to ground level with approved material as
Cum
directed by Engineer-in-Charge
ii) Ordinary Rock (not requiring blasting) Cum 12,199.5
iii) Hard Rock required Control blasting Cum
iv) Hard Rock blasting prohibited Cum
Sand Filling in Foundation Trenches or below raft foundation of RCC box as per Drawing
Cum -
& Technical Specification clause 304 or as directed by Engineer-in-Charge
Plain Cement Concrete (Grade M 15) using 40 mm graded metal for levelling course, for
bedding of culverts, head wall etc. and annular space filling arround footing in rock, Cum 1,424.0
complete as per drawings and Technical Specification Section 1500,1700 and 2100.
Coursed Rubble Stone masonry work in cement mortar 1:3 for foundation/substructure
including staging and treatment of joints complete as per drawing, Technical Cum -
Specification Section 1400 and as directed by the Engineer
Providing and laying and jointing NP4 (as per IS:458) Hume pipes for culverts, complete
as per Technical Specification Section 2900 and IRC Special Publication No.13 - 1998
Providing & Laying 1st Class bedding below hume pipes with graded sand or other
Cum -
granular material passing throuh 5.6mm sieve as per clause 2904 and design Drawing
Providing pointing with Cement mortar (1:3), complete as per Technical Specification
Sqm -
Section 1300 & 2200 and as directed by the Engineer.
Back filling behind head walls, wing walls/retaining and return walls and earth cushion
around pipes or at any other location complete as per drawing and Technical
Specification Clause 305 and Section 2900.
Plain Cement Concrete Grade M 20 for Toe Wall complete as per drawings and
Technical Specifications Section 1500,1700 and 2100.
i) Foundation Cum -
ii) Substructure Cum -
48
Bill of Quantities
Structural Plain Cement Concrete M 20 for Head Walls , including formwork, excluding
reinforcement complete as per drawing, Technical Specification Sections 1500, 1700, Cum
2100 & 2200
Structural Plain/Reinforced Cement Concrete in foundation, including formwork,
excluding reinforcement complete as per drawing, Technical Specification Sections
1500, 1700 & 2100
i) M20 Grade Cum -
ii) M25 Grade Cum -
iii) M30 Grade Cum -
iv) M35 Grade Cum -
Structural Plain/Reinforced Cement Concrete in substructure, parapet wall including
formwork, excluding reinforcement complete as per drawing, Technical Specification
Sections 1500, 1700 & 2200
i) M20 Grade Cum -
ii) M25 Grade Cum 3,495.0
iii) M30 Grade Cum -
iv) M35 Grade Cum -
Reinforced cement concrete in superstructure including shuttering and excluding
reinforcement complete as per drawing and Technical Specification Sections 1500,
1700, 2300 and 2700
i) M25 Grade Cum 673.0
ii) M30 Grade Cum -
iii) M35 Grade Cum -
49
Bill of Quantities
Providing 50 mm thick PCC M-20 grade coping above parapets, return walls and wing
walls as per Technical Specification Section 1500 and 2200 and as directed by the Cum -
Engineer.
Reinforced cement concrete M-30 in approach slab including shuttering and
reinforcement complete as per drawing and Technical Specification Sections 1500, Cum 1,449.0
1700, 2300 and 2704
Filler Joint : Providing & fixing 20 mm thick compressible fibre board in expansion joint
Rmt -
complete as per drawing & Technical Specification.
Providing weep holes in Plain/Reinforced concrete abutment, wing wall, return wall with
100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :
No. 3,563.0
20H towards drawing foce. Complete as per drawing and Technical specifications
Section 2700
Providing and laying of Filter media as per clause 2504.2.2. of MoRTH specifications to
a thickness of not less than 600 mm with smaller size towards the soil and bigger size
towards the wall and provided over the entire surface behind abutment, wing wall and
return wall to the full height compacted to a firm condition complete as per drawing and
Technical Specification 2500
i) With Crushed Material Cum 2,876.0
ii) With Natural Material Cum -
Providing and laying Filter material underneath pitching in slopes complete as per
drawing and Technical specification clause 2504.
i) With Crushed Material Cum 704.1
ii) With Natural Material Cum
Providing and laying pitching on slopes laid over prepared filter material complete as
Cum 1,408.3
per drawing and Technical specification clause 2504.
Providing and laying of boulder apron on river bed for protection against scour with
stone boulders weighing not less than 40 kg each as per Technical Specification clause Cum 2,207.0
2503 and as directed by the Engineer.
Providing 150mm thick Flat Stone Apron embedded in 300mm thick concrete (M15)
Cum 1,435.0
complete as per technical specifications
Provide 12mm thick plaster with Cement mortar (1 : 3), complete as per Technical
Sqm -
Specification Sections 1300 and as directed by the Engineer.
Providing and fixing Tar paper bearing complete as per drawing and Technical
Sqm -
Specifications Clause 2011
Construction of precast RCC railing of M30 Grade including steel, aggregate size not
exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1
in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving Rmt -
adequate space between vertical post for expansion, complete as per approved
drawings and technical specifications.
Providing and constructing RCC crash barrier M-40 grade including centering, shuttering
and reinforcement (Concrete 0.3 Cum/Rmt and steel 28 Kg/Rmt), including Heavy
Class Pipe on top of Crash Barrier fixed with Mild Steel Plate @ 1000 mm c/c including
Rmt 361.0
Base Plate fixed with U Bolts, Nuts and Washers, including painting etc. all complete as
per approved Drawings and Technical Specifications 1500, 1600, 1700 and as per IRC-
6.
50
Bill of Quantities
Providing and fixing of drainage spouts along with drain pipes as complete as per
No. 82.0
drawing and Technical Specifications Section 2705 and as directed by the Engineer.
Providing and painting with Synthetic enamel paint of approved quality for Culvert
numbering, Type of Culvert and Details of Span Arrangement as per IRC:7-1971 and as No. 150.0
directed by Engineer
Providing and laying in position 65 mm thick wearing coat consisting of 40 mm thick
bituminous concrete over a 25 mm thick layer of mastic asphalt over deck slab after
sqm 7,389.0
applying prime coat complete as per drawings and Technical Specifications Sections
500
51
Bill of Quantities
52
Bill of Quantities
-
-
-
-
-
-
-
-
-
-
-
53
Bill of Quantities
-
-
-
-
-
-
-
-
-
-
-
54
Bill of Quantities
-
-
-
-
-
55
Bill of Quantities
56