Professional Documents
Culture Documents
NOTES:
The password to protect/unprotect this worksheet is: 697
This spreadsheet supplements the WGP-0150 Live Line Welding Parameters form. All welding requirements are deter
This spreadsheet is to be used ONLY AS A TOOL to determine gas velocity based on flow rate and pressure.
PRESSURE
IF FLOW GOES ,
GAS IF VELOCITY GOES ,
VELOCITY FLOW RATE ( MMSCFD )
( FT/SEC )
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280
400 0.0 2.6 5.3 7.9 10.5 13.1 15.7 18.4 21.0 23.6 26.2 28.8 31.5 34.1 36.7
405 0.0 2.6 5.2 7.8 10.4 13.0 15.6 18.1 20.7 23.3 25.9 28.5 31.1 33.7 36.3
410 0.0 2.6 5.1 7.7 10.2 12.8 15.4 17.9 20.5 23.0 25.6 28.2 30.7 33.3 35.8
415 0.0 2.5 5.1 7.6 10.1 12.7 15.2 17.7 20.2 22.8 25.3 27.8 30.4 32.9 35.4
420 0.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0
425 0.0 2.5 5.0 7.4 9.9 12.4 14.8 17.3 19.8 22.3 24.7 27.2 29.7 32.1 34.6
430 0.0 2.5 4.9 7.3 9.8 12.2 14.7 17.1 19.6 22.0 24.4 26.9 29.3 31.8 34.2
435 0.0 2.4 4.8 7.3 9.7 12.1 14.5 16.9 19.3 21.8 24.2 26.6 29.0 31.4 33.8
440 0.0 2.4 4.8 7.2 9.6 12.0 14.3 16.7 19.1 21.5 23.9 26.3 28.7 31.1 33.5
445 0.0 2.4 4.7 7.1 9.5 11.8 14.2 16.6 18.9 21.3 23.6 26.0 28.4 30.7 33.1
450 0.0 2.3 4.7 7.0 9.4 11.7 14.0 16.4 18.7 21.0 23.4 25.7 28.1 30.4 32.7
455 0.0 2.3 4.6 6.9 9.3 11.6 13.9 16.2 18.5 20.8 23.1 25.4 27.8 30.1 32.4
460 0.0 2.3 4.6 6.9 9.2 11.5 13.7 16.0 18.3 20.6 22.9 25.2 27.5 29.8 32.0
465 0.0 2.3 4.5 6.8 9.1 11.3 13.6 15.9 18.1 20.4 22.6 24.9 27.2 29.4 31.7
470 0.0 2.3 4.5 6.7 9.0 11.2 13.5 15.7 17.9 20.2 22.4 24.7 26.9 29.1 31.4
475 0.0 2.2 4.4 6.7 8.9 11.1 13.3 15.5 17.7 20.0 22.2 24.4 26.6 28.8 31.1
480 0.0 2.2 4.4 6.6 8.8 11.0 13.2 15.4 17.6 19.8 22.0 24.2 26.3 28.5 30.7
PRESSURE ( PSI )
485 0.0 2.2 4.4 6.5 8.7 10.9 13.0 15.2 17.4 19.6 21.7 23.9 26.1 28.3 30.4
490 0.0 2.2 4.3 6.5 8.6 10.8 12.9 15.1 17.2 19.4 21.5 23.7 25.8 28.0 30.1
495 0.0 2.1 4.3 6.4 8.5 10.7 12.8 14.9 17.0 19.2 21.3 23.4 25.6 27.7 29.8
500 0.0 2.1 4.2 6.3 8.4 10.6 12.7 14.8 16.9 19.0 21.1 23.2 25.3 27.4 29.5
505 0.0 2.1 4.2 6.3 8.4 10.5 12.5 14.6 16.7 18.8 20.9 23.0 25.1 27.2 29.2
510 0.0 2.1 4.1 6.2 8.3 10.4 12.4 14.5 16.6 18.6 20.7 22.8 24.8 26.9 29.0
515 0.0 2.1 4.1 6.2 8.2 10.3 12.3 14.4 16.4 18.4 20.5 22.5 24.6 26.6 28.7
520 0.0 2.0 4.1 6.1 8.1 10.2 12.2 14.2 16.2 18.3 20.3 22.3 24.4 26.4 28.4
PRESSURE ( PSI )
525 0.0 2.0 4.0 6.0 8.1 10.1 12.1 14.1 16.1 18.1 20.1 22.1 24.1 26.1 28.2
530 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 15.9 17.9 19.9 21.9 23.9 25.9 27.9
535 0.0 2.0 4.0 5.9 7.9 9.9 11.9 13.8 15.8 17.8 19.7 21.7 23.7 25.7 27.6
540 0.0 2.0 3.9 5.9 7.8 9.8 11.7 13.7 15.7 17.6 19.6 21.5 23.5 25.4 27.4
545 0.0 1.9 3.9 5.8 7.8 9.7 11.6 13.6 15.5 17.5 19.4 21.3 23.3 25.2 27.1
550 0.0 1.9 3.9 5.8 7.7 9.6 11.5 13.5 15.4 17.3 19.2 21.1 23.1 25.0 26.9
555 0.0 1.9 3.8 5.7 7.6 9.5 11.4 13.3 15.2 17.1 19.1 21.0 22.9 24.8 26.7
560 0.0 1.9 3.8 5.7 7.6 9.4 11.3 13.2 15.1 17.0 18.9 20.8 22.7 24.5 26.4
565 0.0 1.9 3.8 5.6 7.5 9.4 11.2 13.1 15.0 16.9 18.7 20.6 22.5 24.3 26.2
570 0.0 1.9 3.7 5.6 7.4 9.3 11.1 13.0 14.9 16.7 18.6 20.4 22.3 24.1 26.0
575 0.0 1.8 3.7 5.5 7.4 9.2 11.0 12.9 14.7 16.6 18.4 20.2 22.1 23.9 25.8
580 0.0 1.8 3.7 5.5 7.3 9.1 11.0 12.8 14.6 16.4 18.2 20.1 21.9 23.7 25.5
585 0.0 1.8 3.6 5.4 7.2 9.1 10.9 12.7 14.5 16.3 18.1 19.9 21.7 23.5 25.3
590 0.0 1.8 3.6 5.4 7.2 9.0 10.8 12.6 14.4 16.2 17.9 19.7 21.5 23.3 25.1
595 0.0 1.8 3.6 5.3 7.1 8.9 10.7 12.5 14.2 16.0 17.8 19.6 21.4 23.1 24.9
600 0.0 1.8 3.5 5.3 7.1 8.8 10.6 12.4 14.1 15.9 17.7 19.4 21.2 22.9 24.7
LOCITY CALCULATOR
Welding Parameters form. All welding requirements are determined by that form.
rmine gas velocity based on flow rate and pressure.
VELOCITY
IF PRESSURE GOES , VELOCITY GOES
IF FLOW GOES , VELOCITY GOES
FLOW
IF PRESSURE GOES , FLOW GOES
IF VELOCITY GOES , FLOW GOES
PRESSURE
IF FLOW GOES , PRESSURE GOES
IF VELOCITY GOES , PRESSURE GOES