You are on page 1of 15

BAR64...

Silicon PIN Diode


High voltage current controlled RF resistor
for RF attenuator and switches
Frequency range above 1 MHz up to 6 GHz
Very low capacitance at zero volt reverse bias
at frequencies above 1 GHz (typ. 0.17 pF)
Low forward resistance (typ. 2.1 @ 10 mA)
Very low signal distortion
Pb-free (RoHS compliant) package
Qualified according AEC Q1011)

BAR64-02EL BAR64-04 BAR64-05 BAR64-06


BAR64-02V BAR64-04W BAR64-05W BAR64-06W
BAR64-03W
! ! !

 ,  , ,  , ,  ,

  

Type Package Configuration LS(nH) Marking


BAR64-02EL* TSLP-2-19 single, leadless 0.4 OE
BAR64-02V SC79 single 0.6 O
BAR64-03W SOD323 single 1.8 blue 2
BAR64-04 SOT23 series 1.8 PPs
BAR64-04W SOT323 series 1.4 PPs
BAR64-05 SOT23 common cathode 1.8 PRs
BAR64-05W SOT323 common cathode 1.4 PRs
BAR64-06 SOT23 common anode 1.8 PSs
BAR64-06W SOT323 common anode 1.4 PSs
1*BAR64-02EL is not qualified according AEC Q101

1 2013-06-10
BAR64...

Maximum Ratings at T A = 25C, unless otherwise specified


Parameter Symbol Value Unit
Diode reverse voltage VR 150 V
Forward current IF 100 mA
Total power dissipation Ptot mW
BAR64-02EL, T S 135 C 250
BAR64-02V, TS 125 C 250
BAR64-03W, TS 25 C 250
BAR64-04, -05, -06, TS 65 C 250
BAR64-04W, -05W, -06W, TS 115 C 250
Junction temperature Tj 150 C
Operating temperature range Top -55 ... 125
Storage temperature Tstg -55 ... 150

Thermal Resistance
Parameter Symbol Value Unit
Junction - soldering point1) RthJS
BAR64-02EL 60
BAR64-02V, -04W, -05W, -06W 140
BAR64-03W 370
BAR64-04, -05, -06 340
1For calculation of R
thJA please refer to Application Note AN077 (Thermal Resistance Calculation)

Electrical Characteristics at T A = 25C, unless otherwise specified


Parameter Symbol Values Unit
min. typ. max.
DC Characteristics
Breakdown voltage V(BR) 150 - - V
I(BR) = 5 A
Forward voltage VF - - 1.1
IF = 50 mA

2 2013-06-10
BAR64...

Electrical Characteristics at T A = 25C, unless otherwise specified


Parameter Symbol Values Unit
min. typ. max.
AC Characteristics
Diode capacitance CT pF
VR = 20 V, f = 1 MHz - 0.23 0.35
VR = 0 V, f = 100 MHz - 0.3 -
VR = 0 V, f = 1...1.8 GHz, BAR64-02EL - 0.13 -
VR = 0 V, f = 1...1.8 GHz, all other - 0.17 -
Reverse parallel resistance RP k
VR = 0 V, f = 100 MHz - 10 -
VR = 0 V, f = 1 GHz - 4 -
VR = 0 V, f = 1.8 GHz - 3 -
Forward resistance rf
IF = 1 mA, f = 100 MHz - 12.5 20
IF = 10 mA, f = 100 MHz - 2.1 2.8
IF = 100 mA, f = 100 MHz - 0.85 1.35
Charge carrier life time rr - 1550 - ns
IF = 10 mA, IR = 6 mA, measured at IR = 3 mA,
RL = 100
I-region width WI - 50 - m
Insertion loss1) IL dB
IF = 3 mA, f = 1.8 GHz - 0.32 -
IF = 5 mA, f = 1.8 GHz - 0.23 -
IF = 10 mA, f = 1.8 GHz - 0.16 -
Isolation1) ISO
VR = 0 V, f = 0.9 GHz - 22 -
VR = 0 V, f = 1.8 GHz - 17 -
VR = 0 V, f = 2.45 GHz - 14.5 -
VR = 0 V, f = 5.6 GHz - 8.5 -
1BAR64-02EL in series configuration, Z = 50

3 2013-06-10
BAR64...

Diode capacitance CT = (VR) Reverse parallel resistance RP = (VR)


f = Parameter f = Parameter

0.7 10 4
KOhm

pF
10 3 100 MHz
1 GHz
1.8 GHz
0.5
CT

Rp
10 2
1 MHz
0.4 100 MHz
1 GHz
1.8 GHz 10 1

0.3

10 0
0.2

0.1 10 -1
0 2 4 6 8 10 12 14 16 V 20 0 5 10 15 20 25 30 V 40
VR VR

Forward resistance rf = (IF) Forward current IF = (VF)


f = 100MHz TA = Parameter

10 3 10 0
A
Ohm

10 -1

10 2

10 -2
RF

IF

10 1 10 -3

-40 C
25 C
10 -4 85 C
125 C
10 0

10 -5

10 -1 -2 -1 0 1 2
10 -6
10 10 10 10 mA 10 0 0.2 0.4 0.6 0.8 V 1.2
IF VF

4 2013-06-10
BAR64...

Intermodulation intercept point Forward current IF = (TS )


IP3 = (IF ); f = Parameter BAR64-02EL

10 2 120
mA

100
f=900MHz
90
f=1800MHz
80
IP3

IF
70
dBm
60

50

40

30

20

10
1
10 -1 0 1 0
10 10 mA 10 0 30 60 90 120 C 165
IF TS

Forward current IF = (TS ) Forward current IF = (TS )


BAR64-02V BAR64-04, BAR64-05, BAR64-06

120 120
mA mA

100 100

90 90

80 80
IF

IF

70 70

60 60

50 50

40 40

30 30

20 20

10 10

0 0
0 15 30 45 60 75 90 105 120 C 150 0 15 30 45 60 75 90 105 120 C 150
TS TS

5 2013-06-10
BAR64...

Forward current IF = (TS )


BAR64-04W, BAR64-05W, BAR64-06W

120
mA

100

90

80
IF

70

60

50

40

30

20

10

0
0 15 30 45 60 75 90 105 120 C 150
TS

Permissible Puls Load RthJS = (t p) Permissible Pulse Load


BAR64-02EL IFmax / IFDC = (t p)
BAR64-02EL
10 2 10 2

K/W

-
IFmax/IFDC

10 1
RthJS

D=0
0.005
0.01
10 1 0.02
0.05
0.5 0.1
0 0.2 0.2
10
0.1 0.5
0.05
0.02
0.01
0.005
D=0

10 -1 -6 -5 -4 -3 -2 0
10 0 -6 -5 -4 -3 -2 0
10 10 10 10 10 s 10 10 10 10 10 10 s 10
tp tp

6 2013-06-10
BAR64...

Permissible Puls Load RthJS = (t p) Permissible Pulse Load


BAR64-02V IFmax / IFDC = (t p)
BAR64-02V
3
10 10 2

K/W

IFmax / IFDC
-
10 2
D=0
RthJS

0.005
0.01
0.02
10 1 10 1
0.05
0.5 0.1
0.2 0.2
0.1 0.5
0.05
0.02
10 0
0.01
0.005
D=0

10 -1 -6 -5 -4 -3 -2 0
10 0 -6 -5 -4 -3 -2 -1 1
10 10 10 10 10 s 10 10 10 10 10 10 10 s 10
tp tp

Permissible Puls Load RthJS = (t p) Permissible Pulse Load


BAR64-04, BAR64-05, BAR64-06 IFmax / IFDC = (t p)
BAR64-04, BAR64-05, BAR64-06
10 3 10 2

K/W

-
IFmax/IFDC

10 2 D=0
0.005
RthJS

0.01
0.02
0.05
10 1 10 1
0.1
0.5 0.2
0.2 0.5
0.1
0.05
0.02
10 0 0.01
0.005
D=0

10 -1 -6 -5 -4 -3 -2 0
10 0 -6 -5 -4 -3 -2 0
10 10 10 10 10 s 10 10 10 10 10 10 s 10
tP tP

7 2013-06-10
BAR64...

Permissible Puls Load RthJS = (t p) Permissible Pulse Load


BAR64-04W, BAR64-05W, BAR64-06W IFmax / IFDC = (t p)
BAR64-04W, BAR64-05W, BAR64-06W
3
10 10 2

K/W

IFmax/IFDC
-
10 2
D=0
RthJS

0.005
0.01
0.02
10 1 10 1
0.05
0.5 0.1
0.2 0.2
0.1 0.5
0.05
0.02
10 0
0.01
0.005
D=0

10 -1 -6 -5 -4 -3 -2 0
10 0 -6 -5 -4 -3 -2 -1 1
10 10 10 10 10 s 10 10 10 10 10 10 10 s 10
tP tP

Insertion loss IL = -|S21|2 = (f) Isolation ISO = -|S21 |2 = (f)


IF = Parameter VR = Parameter
BAR64-02EL in series configuration, Z = 50 BAR64-02EL in series configuration, Z = 50

0 0

dB
dB
100 mA

-0.1
|S21|2

|S21|2

-10
10 mA
-0.15

-0.2 -15
5 mA

-0.25
-20

-0.3 3 mA

-25 0V
-0.35 1V
10 V
-0.4 -30
0 1 2 3 4 GHz 6 0.5 1.5 2.5 3.5 4.5 GHz 6.5
f f

8 2013-06-10
Package SC79 BAR64...

9 2013-06-10
BAR64...

Date Code marking for discrete packages with


one digit (SCD80, SC79, SC75 1) ) CES-Code
Month 2 0 03 2 0 04 2005 2006 2 0 07 2008 2009 2010 2011 2012 2 0 13 2014
01 a p A P a p A P a p A P
02 b q B Q b q B Q b q B Q
03 c r C R c r C R c r C R
04 d s D S d s D S d s D S
05 e t E T e t E T e t E T
06 f u F U f u F U f u F U
07 g v G V g v G V g v G V
08 h x H X h x H X h x H X
09 j y J Y j y J Y j y J Y
10 k z K Z k z K Z k z K Z
11 l 2 L 4 l 2 L 4 l 2 L 4
12 n 3 N 5 n 3 N 5 n 3 N 5

1) New Marking Layout for SC75, implemented at October 2005.

.
10 2013-06-10
Package SOD323 BAR64...

11 2013-06-10
Package SOT23 BAR64...

Package Outline

0.15 MIN.
1 0.1
2.9 0.1 0.1 MAX.
B
3

2.4 0.15

1.3 0.1
10 MAX.

10 MAX.
1 2
1)
0.4 +0.1
-0.05 0.08...0.1 A
C 5
0.95
0...8
1.9

0.25 M B C 0.2 M A

1) Lead width can be 0.6 max. in dambar area


Foot Print

0.8
0.9
1.3
0.9

0.8 1.2

Marking Layout (Example)

Manufacturer

EH s 2005, June
Date code (YM)

Pin 1 BCW66
Type code

Standard Packing
Reel 180 mm = 3.000 Pieces/Reel
Reel 330 mm = 10.000 Pieces/Reel

4
0.9 0.2
2.13
2.65
8

Pin 1 3.15 1.15

12 2013-06-10
Package SOT323 BAR64...

Package Outline
2 0.2 0.9 0.1
0.1 MAX.
0.3 +0.1
-0.05
3x
0.1 M 0.1
A
3

1.25 0.1
2.1 0.1

0.1 MIN.
1 2
0.65 0.65 0.15 +0.1
-0.05

0.2 M A

Foot Print

0.6
1.6
0.8

0.65
0.65

Marking Layout (Example)

Manufacturer

2005, June
Date code (YM)

Pin 1 BCR108W
Type code

Standard Packing
Reel 180 mm = 3.000 Pieces/Reel
Reel 330 mm = 10.000 Pieces/Reel

4 0.2
8
2.3

Pin 1 2.15 1.1

13 2013-06-10
Package TSLP-2-19 BAR64...

14 2013-06-10
BAR64...

Edition 2009-11-16

Published by
Infineon Technologies AG
81726 Munich, Germany

2009 Infineon Technologies AG


All Rights Reserved.

Legal Disclaimer

The information given in this document shall in no event be regarded as a guarantee


of conditions or characteristics. With respect to any examples or hints given herein,
any typical values stated herein and/or any information regarding the application of
the device, Infineon Technologies hereby disclaims any and all warranties and
liabilities of any kind, including without limitation, warranties of non-infringement of
intellectual property rights of any third party.

Information

For further information on technology, delivery terms and conditions and prices,
please contact the nearest Infineon Technologies Office (<www.infineon.com>).

Warnings

Due to technical requirements, components may contain dangerous substances.


For information on the types in question, please contact the nearest Infineon
Technologies Office.
Infineon Technologies components may be used in life-support devices or systems
only with the express written approval of Infineon Technologies, if a failure of such
components can reasonably be expected to cause the failure of that life-support
device or system or to affect the safety or effectiveness of that device or system.
Life support devices or systems are intended to be implanted in the human body or
to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be
endangered.

15 2013-06-10

You might also like