Professional Documents
Culture Documents
has met the requirements of the IAS Accreditation Criteria for Calibration Laboratories (AC204), has demonstrated
compliance with the ISO/IEC Standard 17025:2005, General requirements for the competence of testing and calibration
laboratories, and has been accredited commencing October 6, 2016, for the calibration discipline(s) listed in the
approved scope of accreditation. The laboratory meets IAS program requirements in the field of calibration.
(See laboratorys scope of accreditation for fields of calibration and accredited calibration.)
Mechanical
Force Up to 5,115 lb.-ft. 0.01% IR Dead Weight
Compression and Up to 500,000 lb.-ft. 0.05% IR Tester, ASTM E
Tension 74
Master Load Cells,
ASTM E 74
Machine and Up to 100% Bending 2.1% Bending 30,000 lbf
Specimen Alignment Bar,
Alignment Data Acquisition
System, ASTM E
1012
Procedure 290
Crosshead Speed Up to 40 in. per min 0.001 in per 0.12 Stopwatch, Dial
minute Indicator, UCC
Procedure 315
Crosshead Up to 2 in. 0.001 in. Dial Indicator,
Displacement Up to 20 in. 0.003 in. UCC Procedure
315
Height Gage, UCC
Procedure 315
Pressure Gages Up to 5 PSI 0.15% IR Pressure
5 PSI to 500 PSI 0.05% IR Transducer, UCC
500 PSI to 10,000 PSI 0.06% IR Procedure 320
Page 2 of 5
CL-128, United Calibration Corporation
TECHNIQUE,
CALIBRATION &
MEASUREMENT REFERENCE
RANGE & RESOLUTION MEASUREMENT CAPABILITY1
AREA STANDARD,
(CMC) ()
EQUIPMENT
Page 3 of 5
CL-128, United Calibration Corporation
TECHNIQUE,
CALIBRATION &
MEASUREMENT REFERENCE
RANGE & RESOLUTION MEASUREMENT CAPABILITY1
AREA STANDARD,
(CMC) ()
EQUIPMENT
Temp.
recorder
Height Gage Up to 36 in./ 0.0015 in. 0.0011 in. UCC proc.381,
Gage Blocks,
setting
standards,
Temp recorder
Calipers Up to 6 in./ 0.0005 in. 0.00073 in. UCC Proc.
211, Caliper
checker, Ring
gage, Temp
recorder
Scales Up to 100 kg 3g Class F1
Weights, UCC
Procedure 200
Up to 10 mV 0.006% IR + 40 nV
Up to 100 mV 0.004% IR + 0.5 V
Up to 1 V 0.0032% IR + 3 V
Up to 10 V 0.0032% IR + 30 V
Up to 100 V 0.0052% IR + 500 V
Thermal
Laboratory 10C to 50C 0.3C Dry Block
Thermometers Standard UCC
Procedure 295
Resistance -100C to 600C 0.1C PT 100 RTD,
Thermometry UCC
Procedure 355
Martel, Dry
Block
Ovens, -100C to 1800C 1.4C Keithley
Furnaces, Martel
Presses Procedure
140-145
Relative 40% to 80% 2.5% R.H. Digital
Humidity 10% to 90% 5% R.H. Hygrometer,
Measure UCC
Procedure 340
Page 5 of 5
CL-128, United Calibration Corporation