Professional Documents
Culture Documents
APsystems
600 Ericksen Ave NE. Ste 200; Seattle, WA 98110
TEL: 844-666-7035 EMAIL: info@APsystems.com
WEB: www.APsystems.com
INTRODUCTION 1
ADVANCED FUNCTIONALITY 29
Scanning Multiple Inverters at Once (Fast Scan)
Scanning Using Third Party (Bluetooth) Device 31
Typing Inverter UIDs 32
Figure 1
3
5. Toggle On or Off.
Login Offline: If you choose to login offline, ArrayApp stores the
5.
Toggle
On
or
Off.
information you enter and you can sync it to the EMA when connected
to the Internet.
Login
Offline:
If
you
choose
to
login
offline,
ArrayApp
stores
the
information
you
enter
and
you
can
sync
it
to
Note:
the
EMA
You when
willconnected
be askedto
tothe
fillInternet.
in your password when you login offline
and want to sync the installations into the EMA.
Note:
You
will
be
asked
to
fill
in
your
password
when
you
login
offline
and
want
to
sync
the
installations
into
the
EMA.
APsystems Installer Tool ArrayApp Operation Manual 2
MANAGING YOUR OWN CONFIGURATION SETTINGS
MANAGING
YOUR
OWN
CONFIGURATION
SETTINGS
Youll
Youll
need
need to
configure
to configure the
ArrayApp
the ArrayApp to
your
nto your
eeds
needs
before
before
using
it
to
musing
anage
itthe
to customer
MANAGING
YOUR
OWN
CONFIGURATION
SETTINGS
managepthe
registration
rocess.
customer registration process.
1. Sign onto the ArrayApp.
1. need
Youll
Sign
too
nto
configure
the
ArrayApp.
the
ArrayApp
to
your
needs
before
using
it
to
manage
the
customer
registration
process.
Your Customer List page is displayed (youll not have any customers in
Your
your Customer
Customer List
page
Listis
the displayed
first time (youll
not
log
you have
onto any
the
customers
ArrayApp). in
your
Customer
List
the
first
1.
time
y ou
l og
Sign
onto
the
ArrayApp.
o nto
t he
A rrayApp).
Your
C
ustomer
L
ist
p
age
is
d
isplayed
(youll
Configuration
Setting
not
have
any
Tool
iIn
customers
con
your
Customer
List
the
first
time
you
log
onto
the
ArrayApp).
Configuration
Setting
Tool
Icon
Figure 3
2. Select
the
Configuration
Setting
Tool
icon
in
the
upper
left
corner
of
the
display
area.
2. Select the Configuration Setting Tool icon
in the upper
The
Setting
left
page
corner
is
displayed.
of the
display area.
2. Select
the
Configuration
Setting
Tool
icon
in
the
upper
left
corner
of
the
display
area.
The Setting page is displayed.
The
Setting
page
is
displayed.
Figure 4
To
This Configure
the
ECU
the
setting establishes Time
Zone
default time
zone for your customers
ECUs. Make sure that this setting matches the time zone for most of
This
yoursetting
establishes
customers, greatly the
dsimplifying
efault
time
zone
the fregistration
or
your
customers
ECUs.
process. Make
The time sure
that
this
setting
m atches
t he
t ime
zone
for
zone can be individually set should you need to do so. m ost
o f
y our
c ustomers,
g reatly
s implifying
t he
registration
process.
The
time
zone
can
be
individually
set
should
you
need
to
do
so.
1. Select Set Time Zone.
1. Select
Set
Time
Zone.
The Set Time Zone page is displayed.
The
Set
Time
Zone
page
is
displayed.
Return
Button
Country/GMT
Figure 5
Specific
Time
Zone
2. Select
the
Country/GMT
pull
down
field.
2. Select the Country/GMT pull down field.
The
Country/GMT
selection
screen
is
displayed.
The Country/GMT selection screen is displayed.
3. Select
the
Country/GMT
for
your
area.
3. 4. Select
Selectthe
the
Specific
Time
Zone
pull
Country/GMT down
for your field.
area.
The
4. Specific
Time
the
Select Zone
selection
sTime
Specific creen
is
Zone displayed.
pull down field.
The5. Specific
Select
tTime
he
time
Zone zone
selection
for
your
ascreen
rea.
is displayed.
6. Press
the
Return
button
to
save
the
configuration.
5. Select the time zone
for your area.
This setting establishes the default number of rows and columns for
To
the
Configure
Array Map. the
TheSize
of
the
initial Array
default is set Map
to four (4) rows and four (4)
columns. Make sure this setting approximates your most common
This
setting
array establishes
size, greatlytsimplifying he
default
number
the registrationof
rows
and
cprocess.
olumns
for
The the
array
Array
M ap.
The
initial
map
default
i s
s et
to
four
( 4)
rows
can be individually adjusted should you need to do so. a nd
four
( 4)
columns.
M ake
s ure
t his
s etting
a pproximates
your
most
common
array
size,
greatly
simplifying
the
registration
process.
The
array
map
can
be
individually
The sizeaof djusted
the Array should
Map you
nis eed
to
do
sto
limited o.
six (6) rows, and 16 columns
(the same as the EMA).
The
size
of
the
Array
Map
is
limited
to
six
(6)
rows,
and
16
columns
(the
same
as
the
EMA).
1. Select Array Map Size.
1. Select
Array
Map
Size.
The
Array Map Size page is displayed.
The
Array
Map
Size
page
is
displayed.
Return
Button
Rows
Figure 6
Columns
2. Select
the
Rows
pull
down
field.
2. Select the Rows pull down field.
The
Row
selection
screen
is
displayed.
The Row selection screen is displayed.
3. Select
the
number
of
rows
you
want
configured
as
a
default.
4. Select
3. the
Columns
Select the number pull
dof
own
rowsfield.
you want configured as a
default.
The
Column
selection
screen
is
displayed.
4. Select the Columns pull down field.
5. Select
the
number
of
columns
you
want
configured
as
a
default.
The Column
6. Press
the
selection screento
issave
Return
button
displayed.
the
configuration.
5. Select the number of columns you want configured as a
default.
2. 2. Select
Select language
language (you
(you
have
thave
wo
choices
two choices
English
or
C hinese).
or
English
3. Press
the
Return
button
to
save
the
configuration.
Chinese).
3.
Press the Return button to save the configuration.
Figure 8
Auto-Populated
Note:
The
country
name
is
auto-populated
based
on
the
information
entered
in
your
setting
in
the
EMA.
NOTE: The country name is auto-populated based on the information
entered in your setting in the EMA.
3. Fill
in
the
customer
details.
UserName:
This
is
a
single
name
that
will
identify
this
specific
customers
Installation.
The
UserName
is
not
case
sensitive.
(Required)
APsystems Installer Tool ArrayApp Operation Manual 7
Password:
This
is
a
temporary
password
that
your
customer
can
use
to
access
their
EMA
account.
Your
customer
can
change
the
password
should
they
so
choose.
(Required)
ADDING A NEW CUSTOMER
NOTE: You can fill in the UserName and then go on to the next
steps if you dont have access to all of the customers information, then
go back later to refill in the rest of the needed information.
NOTE: The information you are entering and scanning into the
ArrayApp is NOT moved to the EMA until you intentionally Sync
the ArrayApp to the EMA, which cannot be done until after you have
entered the inverter UIDs.
ECU
Configuration
page
is
displayed.
The ECU Configuration page is displayed.
Figure 10
Time
Zone
Field
Bluetooth Toggle
ECU
UID
number
is
located
on
the
top
of
the
ECU,
as
well
as
on
the
front
flap
of
the
NOTE: The ECU UID number is a unique APS software serial
ing
box
(see
next
page).
number that is assigned to the ECU during manufacture. It is NOT
the IP Address of the device.
:
The
ECU
UID
number
is
a
unique
APS
software
serial
number
that
is
assigned
to
the
during
manufacture.
It
is
NOT
the
IP
Address
of
the
device.
It is critical that you enter the ECU UID correctly because the EMA
uses this number to identify the system it is monitoring.
ritical
that
you
enter
the
ECU
UID
correctly
because
the
EMA
uses
this
number
to
identify
ystem
it
is
monitoring.
ECU
UID
Number
on
top
of
ECU
Figure 11
ECU
UID
Number
on
front
flap
of
shipping
box
12
ADDING A NEW CUSTOMER
ECU
UID
Number
on
front
flap
of
shipping
box
Figure 12
6. Select Time Zone where ECU is located.
6. Select
Time
Zone
where
ECU
is
located.
NOTE:Note:
Configure
tthe
Configure he
default
default Time
Time
Zone
to
Zone
make
sure
to imaket
matches
sure most
it
of
matches
your
customers
most (See
the
of yourdetails
on
To
Configure
customers (See the the
Edetails
CU
Time
Zon
one),
To which
will
simplify
the
Configure your
ECU
registration
Time work.
Zone), which will simplify your registration work.
7. Press
the
icon
in
the
upper
right
corner
of
the
screen
to
save
the
entered
information.
7. Press the icon in the upper right corner of the screen
to save
Note:
the entered
The
information
you
are
information oninto
entering
and
scanning
the the
front flap
ArrayApp
of moved
is
NOT
the to
the
shipping box.
EMA
until
you
intentionally
Sync
the
ArrayApp
to
the
EMA,
which
cannot
be
done
until
after
you
have
entered
the
inverter
UIDs.
NOTE:
The information you are entering and scanning into the
ArrayApp
is NOT moved to the EMA until you intentionally Sync
the ArrayApp to the EMA, which cannot be done until after you have
entered
the inverter UIDs.
The
layout
and
inverter
configuration
page
is
displayed.
Inverter
Location
13
Figure 13
Inverter
Location
by
Row
and
Column
Inverter
Configuration
Buttons
Native
Scan
Button
APsystems Installer Tool ArrayApp Operation Manual 10
Step
3:
Enter
Inverter
Information
and
Name
Group
View
The
Inverter
UID
numbers
are
located
the
top
of
the
inverter,
as
well
as
the
back
flap
of
the
ADDING A NEW CUSTOMER
The Inverter UID numbers are located the top of the inverter, as well
as the back flap of the shipping box (see next page).
1. Note:
ScanThere
each are
tinverter
hree
(3)
different
one at w a ays
time to
e(which
nter
the
isinverter
what iwere nformation
goinginto
over the
ArrayApp:
here).
2. Scan 1. multiple
Scan
each
inverters
inverter
one
(see at
aFaster
time
(which
Scan, is
w hat
w29).
Page ere
going
over
here).
2. Scan
m ultiple
i nverters
3. Entering the inverter by typing in the UIDs (see Typing in( see
Faster
S can,
P age
3 7).
UIDs,3. Entering
Page 32). the
inverter
by
typing
in
the
UIDs
(see
Typing
in
UIDs,
Page
43).
Inverter
ID
Number
on
the
top
of
the
inverter
Figure 14
Inverter
ID
Number
on
back
flap
of
shipping
box
Figure 15
APsystems Installer Tool ArrayApp Operation Manual 11
ADDING A NEW CUSTOMER
Note:
Select
a
Starting
Point
panel
before
adding
inverters
to
your
layout.
Figure 16
Starting
Point
Orientation
Marker
Note:
You
can
change
the
panel
orientation
from
portrait
to
landscape
by
selecting
the
NOTE: You can change the panel orientation from portrait to
Orientation
Marker
>
marker
in
t
he
lower
right
hand
corner
of
the
panel
location.
The
change
landscape by selecting the Orientation Marker > marker in
in
orientation
the lower is
not
reflected
right handin
corner
the
ArrayApp,
of the b
ut
w
ill
panel show
location.
up
The
wOrientation
hen
the
registration
is
change M
inarker
synced
Deleted:
h
to
t he
E MA.
orientation is not reflected in the ArrayApp, but will show up when the
Note:
You
registration can
change
the
panel
is synced to orientation
the EMA. from
portrait
to
landscape
by
selecting
the
Orientation
Marker
>
marker
in
the
lower
right
hand
corner
of
the
panel
location.
The
change
8. in
oPress
the
Native
rientation
is
not
rSeflected
can
button.
in
the
ArrayApp,
but
will
show
up
when
the
registration
is
synced
Deleted:
h
to
t
he
E8. MA.
Press the Native Scan button.
This
switches
the
smart
phones
built-in
camera
ON
so
you
can
use
it
as
a
scanning
device.
Deleted:
the
smart
phone
This switches the smart phones built-in camera ON so you can use it
Note:
as caan
You
scanning device.
8. Press
the
u se
the
sSmart
Native
can
dbevice
utton.
camera,
or
a
Bluetooth
enabled
scanner
to
perform
this
task
(see
To
Use
a
Third
Party
Scanning
Device
if
wanting
to
use
a
Bluetooth
enabled
scanner).
This
switches
the
smart
phones
built-in
camera
ON
so
you
can
use
it
as
a
scanning
device.
Deleted:
the
smart
phone
NOTE: You can use the smart device camera, or a Bluetooth enabled
Note:
Yscanner ou
can
use
tothe
perform
smart
dthis
evice
task camera,
(seeoTo r
a
Use a Third
Bluetooth
enabled
Party Scanning
scanner
to
perform
this
task
Device if wanting to use a Bluetooth
(see
To
Use
a
Third
Party
Scanning
Device
if
wanting
to
use
a
Bluetooth
enabled
scanner).
enabled scanner).
Native
Scan
Button
Native
Scan
Button
16
APsystems Installer Tool ArrayApp Operation Manual 12
ADDING A NEW CUSTOMER
Figure 17
Note:
R
indicates
the
row
where
the
panel
is
located.
C
indicates
the
column
where
the
panel
is
lNOTE:
ocated.
In
R
the
indicates the
case
above,
the
row where
panel
the ipanel
is
located
is located.
n
position
R:1,
C:3.
C indicates
the column where the panel is located. In the case above, the panel is
located in position R:1, C:3.
9. Place
the
bar
code
of
the
inverter
you
want
to
locate
in
this
position
on
the
array
in
the
center
of
the
Bar
Code
Reader
Box.
9. Place the bar code of the inverter you want to locate in
this position on the array in the center of the Bar Code
The
ArrayApp
automatically
Reader Box. scans
the
bar
code,
placing
the
inverter(s)
in
their
specified
positions
on
the
array.
The ArrayApp automatically scans the bar code, placing the inverter(s)
in their specified positions on the array.
Based
on
the
UID
bar
code,
the
ArrayApp
will
know
the
type
of
inverter
being
scanned
and
place
the
Based
appropriate
on the number
UID bar of
channels
code, the oArrayAppnto
the
layout.
willFknowor
example,
the type the
YofC500
will
have
inverter
both
A
and
being
B
channels,
scanned
and
andwplace
the
YC1000
the
ill
have
all
appropriate number
four
(4)
channels
(1,2,3
of channels
and
4)
assigned.
See
onto the layout. For example, the YC500 will have both A and B
To
Edit
the
Inverter
UIDs
if
you
need
to
reposition
the
channels
based
on
the
physical
layout,
channels, and the YC1000 will have all four (4) channels (1,2,3 and 4)
or
delete
assigned.
a
channel
(See
ie.
aTo
single
Edit sided
theYC500,
Inverter or
three
UIDs channel
if you YC1000).
need to reposition the
Deleted:
A
channels based on the physical layout, or delete a channel (ie. a single
sided YC500, or three channel YC1000).
17
Figure 18
Save
Button
12.
Enter
a
Group
Name
in
the
Group
View
Name
field.
12. Enter a Group Name in the Group View Name field.
13.
Press
the
Save
button.
13. Press the Save button.
Note:
The
information
you
have
been
entering
and
scanning
into
the
ArrayApp
is
NOT
moved
to
the
EMA
until
you
intentionally
Sync
the
ArrayApp
to
the
EMA,
which
cannot
be
done
until
after
yNOTE:
ou
have
eThe information
ntered
the
inverter
you have been entering and scanning into
UIDs.
the ArrayApp is NOT moved to the EMA until you intentionally Sync
the ArrayApp to the EMA, which cannot be done until after you have
entered the inverter UIDs.
Figure 19
18
APsystems Installer Tool ArrayApp Operation Manual 14
Step
4:
Sync
to
EMA
ADDING A NEW CUSTOMER
Figure 20
This
icon
indicates
the
customers
information
has
errors
or
failed
to
sync
to
the
EMA.
If
This icon indicates the customers information has errors or failed
to sync to the
this
occurs,
make
EMA.
sure
If this
all
the
occurs, make
information
sure and
is
correct
all the information
that
you
have
a
isgood
Internet
correct
connection,
and
and
that you
resubmit.
have a good Internet connection, and resubmit.
Note:
NOTE:A
customer
Aw ithout
any
without
customer sign
on
tany
he
customer
sign on ltheist
indicates
customer his
list
information
indicatesis
incomplete,
or
his
ihis
nformation
informationhasnt
isbeen
synced
to
or
incomplete, EMA.
his information hasnt been synced to
EMA.
The final step in the configuration process is to link the inverters to the
ECU.
Step
5.
Link
the
Inverters
to
the
ECU
The
final
step
in
the
configuration
process
is
to
link
the
inverters
to
the
ECU.
NOTE: Performing the linkage task directly from the Android mobile
Note:
Performing
device requires the
linkage
a V4.0 task
or directly
later ECU. from
Ifthe
you Android
have anmobile
earlier device
ECU requires
a
V4.0
or
later
ECU.
If
you
ECU,
or Zigbee have
an
theearlier
linkage ECU,
needs the
to
linkage
needs
to
using
be performed be
performed
the EMAusing
the
EMA
functionality.
functionality.
You
need
to
make
sure
the
mobile
device
is
connected
to
the
ECU
before
actually
linking
the
You
inverters
to
need to make
the
ECU
sure
through
the
the
mobile device
ArrayApp.
is the
Refer
to
connected
APsystems
to the
ECU
ECU
documentation
for
before actually linking the inverters
instructions
on
making
this
direct
connection.
to the ECU through the ArrayApp.
Refer to the APsystems ECU documentation for instructions on making
this direct connection.
15. Press
the
Link
ECU
button.
15. Press the Link ECU button.
The
Link
UIDs
to
ECU
page
is
displayed.
The Link UIDs to ECU page is displayed.
Figure 21
16.
Verify
ECU
ID,
ECU
IP
Address,
and
press
the
Send
button.
16. Verify ECU ID, ECU IP Address, and press the Send
button.
Note:
It
is
a
Best
Practice
to
verify
that
all
of
the
information
youve
entered
into
the
ArrayApp
has
been
successfully
uploaded
to
the
EMA
by
opening
and
checking
your
customers
EMA
NOTE:
account
It is a Best Practice to verify that all of the information
information.
youve entered into the ArrayApp has been successfully uploaded
to the EMA by opening and checking your customers EMA account
information.
21
APsystems Installer Tool ArrayApp Operation Manual 16
ADDING A NEW CUSTOMER
Edit
To
the
Edit
Inverter
the
UU
Inverter
TO EDIT IDs
IDs
INVERTER UIDS
THE
Inverter
Edit
Inverter
Button
Edit
Button
. Press
the
Press
Inverter
the
Inverter
Edit
button.
Edit
button.
1. Press the Inverter Edit button.
e
he
Inverter
Edit
Inverter
list
Edit
is
ids
isplayed.
list
displayed.
The Inverter Edit list is displayed.
Inverter
Edit
Inverter
List
Edit
List
Figure 22
22 22
Edit UID
1. Select the inverter that you want to edit
2. Click Edit UID
3. Enter the new UID at the pop up dialog
Delete UID
1. Select the inverter that you want to delete
2. Click Delete UID
Switch Channel
1. Select the UID that you need to switch channel
2. Click Switch Channel
NOTE: The YC500 has two channels: A and B. The YC1000 has
four channels: 1, 2, 3 and 4. When you enter an inverter UID, the
application automatically selects a channel for this inverter. Select
this button if the system chooses the incorrect channel. The channel
is no longer an option once it has been successfully entered into the
database.
Rotate panel
1. Select the inverter that needs to change orientation
2. Click Rotate
To
Add
Columns
TO ADD and
Rows
to
the
COLUMNS AND Array
ROWS Map
TO THE ARRAY MAP
View
Edit
Button
Note:
Select
a
Starting
Point
panel
before
adding
columns
and/or
rows
to
the
layout.
NOTE:
Select
a
Starting
View
PointEdit
Button
panel before adding columns and/or
rows to the
1. Press
the
View
Edit
button.
layout.
Note:
Select
a
Starting
Point
panel
before
adding
columns
and/or
rows
to
the
layout.
list
is
displayed.
The
View
Edit
1. the
1. Press
Press View
the View
Edit
button.
Edit button.
Starting
Point
Panel
View
Edit
List
The
The View
View Edit
Edit
list
is
dlist is displayed.
isplayed.
Starting
Point
Panel
View
Edit
List
Figure 24
24
24
2. Select one of the four (4) Add
functions from the View
2. Select
Edit list.
one
of
the
four
(4)
Add
functions
from
the
View
Edit
list.
Figure 25
3.
Press
the
icon
in
the
upper
right
corner
of
the
screen
to
save
the
edit.
3. Press the icon in the upper right corner of the screen
to save the edit.
25
Figure 27
26
26
APsystems Installer Tool ArrayApp Operation Manual 21
ADDING A NEW CUSTOMER
2.one
2.
Select
of
Select
the
two
one
(2)
of the two
Delete
(2) Delete
functions
from
the
Vfunctions
iew
Edit
list.
from the
View Edit list.
Figure 28
3.
Press
the
icon
in
the
upper
right
corner
of
the
screen
to
save
the
edit.
3. Press the icon in the
upper right corner of the screen
to save the edit.
27
Figure 29
2.
Select
2. the
Select
Zoom
Ithe n
function
Zoomfrom
In tfunction
he
View
Edit
fromList.
the View Edit List.
3.
Press
3. the
Press
icon
the
in
icon
the
upper
inright
thecorner
upper of
right
the
screen
to
save
corner of tthehe
escreen
dit.
to save the edit.
28
MANAGING
Once youCUSTOMER
have pressed A, CCOUNTS
your customer information is saved in the
ArrayApp and you can step away from the process and resume by
Once
you
have
pressed
,
your
customer
information
is
saved
in
the
ArrayApp
and
you
selecting .
can
step
away
from
the
process
and
resume
by
selecting
.
Note:
The
information
NOTE: The you
are
entering
and
information youscanning
into
the
are entering and ArrayApp
scanning is
NOT
intomoved
the to
the
EMA
until
you
intentionally
Sync
the
ArrayApp
to
the
EMA,
which
cannot
be
done
until
after
ArrayApp is NOT moved to the EMA until you intentionally Sync
you
have
entered
the
inverter
to
the ArrayApp UIDs.
the EMA, which cannot be done until after you have
entered the inverter UIDs.
To
Edit/Complete
an
Incomplete
Registration
TO EDIT/COMPLETE AN INCOMPLETE REGISTRATION
1.
Sign
onto
the
ArrayApp.
1. Sign onto the ArrayApp.
The
Customer
List
is
displayed.
The Customer List is displayed.
Customer
Search
Field
Figure 30
2. Search for the customer you want to edit/complete by
entering their UserName in the Customer Search field
2. Search
for
the
customer
you
want
through
or by scrolling to
edit/complete
the list.by
entering
their
UserName
in
the
Customer
Search
field
or
by
scrolling
through
the
list.
3. Select the UserName.
3. Select
the
UserName.
29
Figure 31
ECU
UID
Press the
Plus icon to add an additional ECU to the customer
account.
Select UserName
to edit the customers personal information.
Press the
ECU ID to edit the ECU information.
Select the ECU ID field to edit the ECU UID.
Press the Plus icon next to Group View to add an additional
Group View Press
for thisthe
ECU. Plus
icon
to
add
an
additional
ECU
to
the
customer
account.
Select
UserName
to
edit
the
customers
personal
information.
Press
the
ECU
ID
to
edit
the
ECU
information.
Select
the
ECU
ID
field
to
edit
the
ECU
UID.
Press
the
Plus
icon
next
to
Group
View
to
add
an
additional
Group
View
for
this
ECU.
Figure 32
30
MANAGING CUSTOMER ACCOUNTS
To
Delete
a
Customer
1. Sign
oTO
nto
DELETE A CUSTOMER
the
ArrayApp.
1. Sign onto the ArrayApp.
The
Customer
List
is
displayed.
The
Customer
List
is displayed.
Customer
Search
Field
Figure 33
2. Search for the customer you want to edit/complete by
entering their UserName in the Customer Search field
or by scrolling through the list.
2. Search
for
the
customer
you
want
to
edit/complete
by
entering
their
UserName
in
the
Customer
3. SSelect
earch
fthe
ield
UserName.
or
by
scrolling
through
the
list.
The Customer Detail page is displayed.
The
Customer
Detail
page
is
displayed.
3. Select
the
UserName.
UserName
Figure 34
Figure 35
4. Select
the
ECU
where
you
want
to
export
the
inverters.
Dele
Figure 36
34
List
UIDs
Button
5. Press
the
List
UIDs
button.
Deleted:
on
5. Press
the List UIDs button.
APsystems Installer Tool ArrayApp Operation Manual 27
MANAGING CUSTOMER ACCOUNTS
The
Thelist
list of
of
inverters
inverters associated
associated with
twith
his
ECU
this is
dECU
isplayed.
is displayed.
Figure 37
Copy
Button
6. Press
the
Copy
button.
6. Press the Copy button.
Note:
The
copy
function
allows
you
to
copy
and
paste
to
another
application
on
your
mobile
device.
NOTE: The copy function
allows you to copy and paste to another
application on your mobile device.
36
ADVANCED
FUNCTIONALITY
SCANNING MULTIPLE INVERTERS AT ONCE (FAST SCAN)
Scanning
Multiple
Inverters
at
Once
(Fast
Scan)
The Fast Scan feature allows you to rapidly scan the inverters onto the
The
Fautomatically
Array Map, ast
Scan
feature
moving
allows
you
fromto
rapidly
panel sto can
panelthe
inverters
depending onto
on
the
Array
Map,
automatically
your predetermined loading arrangement Horizontal or Vertical.
moving
from
panel
to
panel
depending
on
your
predetermined
loading
arrangement
Horizontal
or
Vertical.
The Fast
Scan feature requires that you open the Configuration
Setting The
ToolFast
to configure
Scan
feature
the ArrayApp.
requires
that
you
open
the
Configuration
Setting
Tool
to
configure
the
ArrayApp.
NOTE:
You can use the smart device camera, or a Bluetooth enabled
scannerNote:
You
can
this
to perform use
task
the
smart
(see dTo evice
Use camera,
a Third or
Party
a
Bluetooth
enabled
scanner
to
perform
this
task
Scanning
Device to use
(see
To
aUBluetooth enabled
se
a
Third
Party
scanner).
Scanning
Device
to
use
a
Bluetooth
enabled
scanner).
Deleted:
if
w
1. Sign
onto
the
ArrayApp.
1. Sign
onto the ArrayApp.
Your
Customer
List
page
is
displayed
(youll
not
have
any
customers
in
your
Customer
List
the
Your Customer List page is displayed (youll not have any customers in
first
time
you
log
onto
the
ArrayApp).
your Customer List the first time you log onto the ArrayApp).
Configuration
Setting
Tool
Icon
Figure 38
2. elect
S 2. Select
the
Configuration
Setting
Tool
icon
in
the
upper
upper
the Configuration Setting Tool icon in the left
corner
of
the
display
area.
left
corner of the display area.
The
Setting
page
The is
displayed.
Setting page is displayed.
Fast
Scan
Setting
Figure 39
37
3. Select
3. Fast
Scan
SFast
Select etting.
Scan Setting.
The
Fast
SThe
can
SFast Scan
etting
page
Setting page is displayed.
is
displayed.
Fast
Scan
Toggle
APsystems Installer Tool ArrayApp Operation Manual 29
3. Select
Fast
Scan
Setting.
Figure 40
Figure 41
5. Select
either Horizontal or Vertical.
5. Select
either
Horizontal
or
Vertical.
NOTE: It is Best Practice to have your inverters well organized to
e:
It
is
Best
Practice
matchto
your
have
Array
your
inverters
Map layout
38
well
organized
prior to tusing
o
match
the your
Fast Array
Scan Map
layout
feature.
r
to
using
the
Fast
Scan
feature.
The horizontal orientation
orientation
The
horizontal
scans the inverter UIDs onto the Array
scans
the
inverter
UIDs
onto
the
Array
Map
using
the
horizontal
axis,
Map
while
using theorientation
the
vertical
horizontal uses
taxis, while
he
vertical
axis.
the vertical orientation uses the
vertical
axis.
Horizontal
Vertical
Figure 42
APsystems Installer Tool ArrayApp Operation Manual 30
39
ADVANCED FUNCTIONALITY
up
the
scanner
and
pair
it
with
your
Android
device.
The
scanner
can
only
be
pit
manufacturers documentation, set up the scanner and pair with
aired
with
one
your Android device. The scanner can only be paired with one device at
device
at
aa
ttime.
ime.
Make
sure
Maketo
test
sure
the
Bto test the
luetooth
Bluetooth
connection
connection
between
between
the
scanner
and
the
the
scanner
mobile
device
before
and the mobile device before attempting
attempting
to
use
it
for
the
ArrayApp
registration
process.
to use it for the ArrayApp
registration process.
Note:
If
your
device
has
been
connected
to
the
scanner,
the
keyboard
on
your
mobile
device
NOTE: If your device has been connected to the scanner, the keyboard
may
disappear.
Switching
off
Bluetooth
will
reactivate
the
keyboard.
on your mobile device may disappear. Switching off Bluetooth will
reactivate the keyboard.
Figure 43
3. Switch ON the Bluetooth toggle.
3. Switch
ON
the
Bluetooth
toggle.
4. Follow the instructions in Step 3: Scan Inverter Formatted:
Font:+Theme
Body
(Calib
4. Follow
the
Information
instructions
in
and
Step
Name
3:
Scan
IGroup
nverter
IView.
nformation
and
Name
Group
View.
When Editing
2. Open the Edit ECU or Edit Group View page (see To
Edit/Complete and Incomplete Registration).
You Typing
You
center
can Inverter
an
enter
the the
Inverter U IDs
Inverter
UIDs
UIDs
bby
y
typing
typing them
them should
should you
you
need
needto
for
toany
forreason.
any reason.
You
can
enter
the
Inverter
UIDs
by
typing
them
should
you
need
to
for
any
reason.
1. Select
a
panel
location
where
you
want
to
enter
the
associated
inverter
UID.
1.
Select a panel location where you want to enter the
1. Select
a
panel
location
where
you
want
to
enter
the
associated
inverter
UID.
associated inverter
Selected
Panel
Location
UID.
Selected
Panel
Location
Figure 44
2. Tap
the
panel
youve
selected
again.
2. Tap the panel youve selected again.
2. Tap
the
panel
youve
selected
again.
A UID A
UID
Entry
field
is
displayed
along
with
the
digital
keyboard.
Entry field is displayed along with the digital keyboard.
A
UID
Entry
field
is
displayed
along
with
the
digital
keyboard.
UID
Entry
Field
UID
Entry
Field
Figure 45