Professional Documents
Culture Documents
Engineering Services
Start With Quality Destination will be Excellence
Our company has achieved a widespread recognition in the industry by
About Us
Established in the year 2015 at Maharashtra, India, we Kirti NDT And Engineering
Services are Sole Proprietorship based firm, involved as the Manufacturers, Wholesale
Trader and Exporter of Measuring Instrument Like Ultrasonic Thickness Gauge, Digital
Infrared Thermometer, Digital Anemometer, Digital Lux Meter and NDT Accessories like
Coaxial Cables, Probes, Calibration Blocks for ultrasonic Testing and Welding Inspection
Gauges Like Bridge Cam Gauge, Fillet weld Gauge, V-Wac Gauge and much more. All our
products are getting widely acclaimed among the large clientele for their exclusive designs,
superior quality, and reliability. Apart from this, our ability to maintain timelines as well as
quality in the assortment, providing cost-effective solutions and assurance to make timely
shipment of the orders placed by customers have assisted us positioning our name in the list
of top-notch companies of the industry.
PRODUCTS:
Operating Principles
Display LCD Display
Minimum Display Unit 0.1mm
Working Frequency 5Mhz
Measuring Range 1.2 to 225mm
Sound Velocity Range 1000 to 9999m/s
DIGITAL INFRARED THERMOMETER
An infrared thermometer is a thermometer which infers temperature from a portion of the
thermal radiation sometimes called blackbody radiation emitted by the object being measured.
Applications:
To Check Temperature of Hot Water Pipes, Hot Engine Parts, Cooking Surface, Hot Tube &
Insulation, Electrical Connection, Hot & Cold Food product, Heating & Air-conditioning etc.
Operating Principles Model:M380 Model:M550
Measuring Range -50 to 380 C(-58~716 F) -50 to 550 C(-58~716 F)
Operating 0C~50C
Temperature
DIGITAL ANEMOMETER
An Anemometer or often known as a Wind Speed Meter, measures the wind velocity, which simply means the speed of
which the wind travels.
A. Air Velocity
UNIT Range Resolution Threshold Accuracy
Ft/Min 0-5860 19 39
Knots 0-55 0.2 0.1
Km/hr. 0-90 0.3 0.3
Mph 0-65 0.2 0.2
B. Temperature
SPECIFICATION:
Measuring Range 0~1.8mm/0~71.0mil
Accuracy +/-0.03mm
Resolution 0.01mm/1mil
Minimum Diameter of Substrate 50mm
Minimum Thickness of Substrate 0.5mm
Operating Humidity Less than 90%RH
Dimension 61.98x30.57x104.99mm
Angle probe Single Crystal Straight Beam Probe Twin Crystal Straight Beam Probe
ANGLE PROBE
We are engaged in manufacturing and supplying a wide range of Angle Probes that are used in various industries and
These Equipment's are widely applicable in various areas for inspection of angle of sound beam.
These Equipment's are available in various specifications. We trade these Equipment's in various parts of the country
at competitive market prices.
We manufacture these Normal Probes using high quality raw material that is procured from our reliable vendors. We
trade these Normal Probes in various small and large scale industries, research organizations and institutions at
reasonable prices.
During testing they are applied directly to the flat surfaces of the test material or object.
Probes with smaller diameters can be applied to test slightly curved materials.
Single element contact probes work by emitting compression (longitudinal) waves into the test material.
These Dual Crystal Probes are easy to use and are widely appreciated for high durability, accurate measurements
and excellent performance. We do quality inspection of these Dual Crystal Probes before delivering these to our
esteemed clients.
Special High Temperature Cables, & Dual Cables with two connectors at each end to fit dual crystal transducer are
also available.
Generally all cables are with 2 meters length. But as per requirement any cable length in the range of 1 meter - 100
meter can be supplied.
Standard Lengths 2 Mtrs, All Cables Are 50 Ohms Impedance Unless Otherwise Specified
BNC to Microdot Lemo to Mini Lemo Mini Lemo to Microdot Lemo to Microdot BNC to Mini Lemo
BNC to Lemo Lemo to Lemo Dual BNC to Dual Mini Lemo Dual Mini Lemo to Dual Mini Lemo Mini Lemo to Mini Lemo
WELDING INSPECTION GAUGES:
We offer Comprehensive high-quality precision Weld Measuring Gauges for checking Weld Thickness, Butt Welds, Pits,
Undercuts, and much more. Our All Welding Inspection Gauges are made with Stainless steel with Sturdy, High
Skew-T Fillet Weld Gauge Fillet Weld Gauge Estone Weld Gauge
Vernier Weld Gauge Bridge Cam Weld Gauge V-Wac Weld Gauge Digital Vernier Weld Gauge
Other Features:
Changes from standard to metric, simply remove gauge body, turn scales over and replace
body
Measure internal misalignment before welding
Measure fit-up gap of welding
Measure bevel on end preparation
Measure the crown height of welds
Measure fillet weld size
Measure scribe line, socket welds
Measure scribe line, socket welds
FILLET WELD GAUGE:
Enriched with a vast industry experience, we are capable of trading and distributing premium quality Fillet Weld
Gauge. Resistant to corrosion, it is widely considered among our client-base spread nationwide. Conceding to the varied
Specification:
Accuracy Guaranteed New Manufacturing Process Allows This Unsurpassed Accuracy of
.005
Fillet Weld Gauge allows fast, accurate measurement of eleven (11) fillet weld sizes: 1/8,
3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8, and 1, and their metric equivalents, to
determine weld sizes, either concave or convex.
Each gauge blade is made of 1-1/4 x 4 cold rolled stainless steel to resist rust and
bending.
Blades are debarred to remove rough edges.
All sizes and numerals are engraved into the surface for easier reading.
The set of seven blades comes in a handy 2 x 4 1/2 pocket case weighing only 4 oz.
V-WAC WELD GAUGE:
The V-WAC Gage easily and quickly checks the four essential measurements required for compliance with the NRC
Visual Weld Acceptance Criteria. Checks undercut depth, porosity comparison, amount of porosity per linear inch and
Skew-T welds are usually specified in one of three ways. Theoretical Throat size, Leg Size, or the Inspection Dimension
is given.
If the Inspection dimension is given, the Skew-T Fillet Weld Gauge can be used directly without any calculations. In
this example, a 1/2 inch inspection dimension is specified. To use the gauge, loosen the locking screw, fully extend the
pointer and lightly tighten the locking screw. Using the top edge of the pointer, set the gauge to .500" or 1/2 of one inch.
Place the gauge onto one of the members on the obtuse angle side and gently slide it up to the toe of the weld. This
verifies the 1/2" inspection weld size. The gauge can also be used on the angled member.
SKEW-T FILLET WELD GAUGE :
The gauge can be also used on the acute side of the weld, on both members as well.
If the Theoretical Throat size is given, the dihedral angle must also be specified or it can be measured using the
To measure the dihedral angle, place the gauge on one of the members and slide forward until the rotating plate comes
in complete contact with the other member. The angle can be read from this scale. This angle measures 35 degrees.
With the known 1/2 inch inspection dimension and the verified dihedral angle, we can use the Skew-T Weld Calculator
to find the Theoretical Throat Size and the Leg Size of the fillet weld.
First, find the 1/2" or .500" inspection dimension on the lowest scale of the calculator. Slide the inside card until the
1/2 inch dimension lines up with the 35 degree dihedral angle. Now, look at the Theoretical Throat scale. It reads just
over 830". Now look at the Leg Size scale and find the 35 degree dihedral angle. It reads just over .870".
Lets say a leg size of 5/8" or .625" and an dihedral angle of 70 degrees is given. Slide the inside card until the 5/8"
dimension lines up with the 70 degree dihedral angle. The calculator shows the Theoretical Throat size to be just over
.510" of an inch. Find the 70 degree dihedral angle mark on the Inspection Dimension scale. The Inspection dimension
reads just under .590".
TAPER GAUGE :
It is made of stainless steel and is characterized by portable and compact structure, easy operation, wide application
VERNIER WELD GAUGE :
A precision design for measuring of flat welding seams and welding seams in corners.
Mobile:+917718917422
WhatsApp:+918779246578
E-Mail: kirtindt@yahoo.in, kirti@kirtindt.in
Website: www.kirtindt.in