Professional Documents
Culture Documents
y 10000 N / mm2 E 30 X 106 N / mm2 and 0.3 Determine the value of stress z [05M]
u ( x 2 2 y 2 6 xy)104
3)If a displacement field is described by determine x , y and xy
v (3x 6 y y 2 )104
at x=1 and y=0
4)Determine the displacements of nodes of the spring system shown in figure.
Page no 20 fig 1.10
5a)Explain briefly about potential energy approach.
b)What are the merits and demerits of FEM
unit-2
1) Consider a bar as shown in figure. Youngs Modulus E = 2 x 105 N/mm2. A1 = 2cm2, A2 = 1cm2
and force of 100N. Determine the nodal displacement.
2)Derive strain displacement and stiffness matrix for 1-D bar element.
3)Consider the bar in below figure. Cross sectional area Ae = 1.2 in.2, and Yongs modulus E = 30 x
106 psi, if q1 = 0.02 in. and q2 = 0.025 in., determine the following
a. The displacement at point P,
b. The strain and stress
c. The element stiffness matrix, and
d. The strain energy in the element
[10]
5.An axial load P = 400 x 103 N is applied at 200C to the rod as shown in below figure. The temperature is
6a) What do you understand by interpolation function? Also write its mathematical
analysis.
b)What are the various methods to treat boundary conditions .Explain any one
7)In Fig a load P=60x105N ia applied as shown. Determine the displacement field, stress and support
reactions in the body take E=20X105N/mm2.