Professional Documents
Culture Documents
VIDEO SERVER
USER MANUAL
1
FUM-T10 Video Server Users Manual
Cautions
1. Read this user manual before use
2. Keep this user manual accessible
3. Follow instruction
4. Keep this unit away from cleanser
5. Keep this unit dry in ventilation
6. Give way to ventilation outlet
7. Power cord must be fixed properly
8. To avoid damage, unit must not be stuffed or be splashed with something
9. Do not repair this unit on your own
10. Please contact local dealer for the following condition:
a. Power cord damaged
b. Showered unit
c. Failure in operation
d. Unit dropped or cabinet damaged
11. Repairing components must be approved by original manufacturer.
12. Ground wire of outdoor image source must be well connected to the ground to prevent from
thunder attack
13. Power cord and outdoor image source cable should be detached in case of thunder attack
Warning
Only qualified engineer can detach the cover. There is nothing inside for end users.
Cover must not be removed in case of power on.
2
FUM-T10 Video Server Users Manual
CONTENT
1. OUTLINE
1.1 INTRODUCTION ------------------------------------------ 4
1.2 FEATURE ---------------------------------------------------- 5
1.3 ACCESSORY ------------------------------------------------ 5
1.4 SYSTEM REQUIREMENT ------------------------------ 5
1.5 PANELS ------------------------------------------------------- 6
1.5.1 FRONT PANEL ------------------------------------------- 6
1.5.2 REAR PANEL --------------------------------------------- 6
2. INSTALLATION
2.1 CABLING ---------------------------------------------------- 8
2.2 SURVEILLANCE SOFTWARE ------------------------ 11
2.3 ETHERNET FRAMEWORK & CONNECTION -- 13
2.3.1 PC TO VIDEO SERVER CONNECTION --------- 13
2.3.2 INTRANET CONNECTION -------------------------- 17
3. OPERATION
3.1 LivePlayer SURVEILLANCE SOFTWARE --------- 20
3.1.1 LivePlay SOFTWARE INTERFACE ---------------- 20
3.1.2 LivePlayer INTERFACE SETUP --------------------- 22
3.2 IE BROWSER SETUP CAMERA FUNCTION ----- 30
3.2.1 Web Server AUTHORIZATION ---------------------- 31
3.2.2 Status ---------------------------------------------------- --- 32
3.2.3 View --------------------------------------------------------- 33
3.2.4 System ------------------------------------------------------ 35
3.2.5 Network ---------------------------------------------------- 36
3.2.6 Image ------------------------------------------------------- 37
3.2.7 User --------------------------------------------------------- 38
3.2.8 Alert -------------------------------------------------------- 39
3.2.9 Factory Default Function ------------------------------ 40
3.2.10 Restart Function --------------------------------------- 41
3.2.11 Upgrade -------------------------------------------------- 41
4. ELSE
4.1 SPECIFICATIONS --------------------------------------- 42
3
FUM-T10 Video Server Users Manual
1. OUTLINE
Video Server is a low cost provision of network surveillance facility which transmits images
on network to remote PC in format of compression technology. Monitoring, storage and
recognition on line are provided by video server. Image transmission remains the same quality on
both ends of server site and remote site. Single image source can be transmitted to multi ports
saving lots of cabling overhead.
1.1 INTRODUCTION
Dual compression technology JPEG & MPEG-4, remote site operator can access to the server
site via IE browser to secure personal safeguard and property. Video Server works with existing
digital network transmission system. LivePlayer software provides functions of live monitoring,
monitoring setup conditions & motion/schedule recording.
4
FUM-T10 Video Server Users Manual
1.2 FEATURE
Image & audio transmission via network
Dynamic IP & static IP support
Dual compression technology JPEG & MPEG-4
Digital alarm I/O
RS-485 for PTZ control
LivePlayer client software
Built in motion detection & recording functions
IE browser remote monitoring & setup support
Firmware upgrade via IE browser on line
1.3 ACCESSORY
CD ROM
Remarks
[1] . Please contact local dealer in case of accessory shortage
[2] . Video server may be damaged & warranty void in use of other power adaptors
5
FUM-T10 Video Server Users Manual
1.5 PANELS
Video In
Video input port takes images from camera or other image sources
Video Out
Video output port provides images to monitor or recording devices
Audio In
Audio input port takes audio from microphone or other audio devices
Reset Button
Press this button to restart
RS-485
RS-485 control port for PTZ control
DC +12V
Power input port receives 12VDC power
6
FUM-T10 Video Server Users Manual
LAN
RJ-45 10/100 Based-T Ethernet transmission port
ALARM I/O
Alarm input/output port two sets for digital sensor input one set for digital alarm output
Definition of the pins
1. +12VDC
2. digital sensor input #1; Hi active
3. digital sensor # 2; Hi active
4. GND
5. digital output out
6. digital output in
caution: pin #2 & pin #3 are individual input ports Hi active input voltage rated 12VDC
pin #5 & pin #6 are the same output port normal open alarm close
POWER LED
Power indicator power on indicator red
LAN LED
Network indicator LED ON LAN working
7
FUM-T10 Video Server Users Manual
2. INSTALLATION
2.1 CABLING
1. Power Input
Plug in the power adaptor which supplies +12VDC. Video server could be damaged of
improper voltage input. Power LED turns to red in five seconds video server system
activated.
2. Video Input
Video source from camera or other device is to be connected to the VIDEO IN port.
Video source must be format of CVBS, 1 Vp-p Composite Video Signal, 75 . Prior to video
input, camera or other device must be sure of working well. Other device could be DVR or VCR.
8
FUM-T10 Video Server Users Manual
Plug the cable in the Ethernet port with LAN mark for Ethernet connection.
4. Video Output
VIDEO OUTPUT is to be connected to CCTV monitor for live monitoring. The video
output format is 1 Vp-p Composite Video Signal, 75
9
FUM-T10 Video Server Users Manual
5. RS-485 Connection
RS-485 --- Pan Tilt Control Port. User can setup pan tilt control on IE browser. Please
keep alert on the polarity D+ & D- of RS-485 port.
6. Audio Input
AUDIO IN receives audio from microphone or other audio device.
10
FUM-T10 Video Server Users Manual
11
FUM-T10 Video Server Users Manual
12
FUM-T10 Video Server Users Manual
13
FUM-T10 Video Server Users Manual
14
FUM-T10 Video Server Users Manual
d. Select Use the following IP address to input IP address, Subnet mask and
Default gateway. Click OK accordingly.
15
FUM-T10 Video Server Users Manual
b. Enter DOS and input ipconfig. Click enter to inspect IP address, Subnet
mask and Default gateway.
5. Connection
a. Execute the client software LivePlayer. Click Setup and Refresh to search
video server. It takes time to search the video server. Please be patient. Alert
dialog pops up upon video server found. Please review 3.1.2 for details.
16
FUM-T10 Video Server Users Manual
1. Cat 5 cable must be used in condition of connection via router, DSL modem and hub.
17
FUM-T10 Video Server Users Manual
3. Video server detects DHCP when system starts working. Video server enables DHCP
protocol to accept IP address from NAT when NAT router detected. Default IP address
becomes 192.168.1.200 when NAT router not detected. Suppose there is an IP address
192.168.1.200 on internet. This device must be turned off prior to video server renew the
IP setup.
4. Connection
a. Execute client software LivePlayer. Click Setup and Refresh to start video
server search. Please be patient for waiting video server search. Click OK
by the time video server detected. Please review 3.1.2 for details.
18
FUM-T10 Video Server Users Manual
19
FUM-T10 Video Server Users Manual
3. OPERATION
1. LivePlay icon comes up on the desktop after installation. Double clicks on the mouse to
activate LivePlay software. Screen shot and control panel displays as follows:
20
FUM-T10 Video Server Users Manual
21
FUM-T10 Video Server Users Manual
1. Refresh
22
FUM-T10 Video Server Users Manual
e. Click OK
23
FUM-T10 Video Server Users Manual
24
FUM-T10 Video Server Users Manual
25
FUM-T10 Video Server Users Manual
4. Setup in IE Browser
b. Click Setup.
26
FUM-T10 Video Server Users Manual
5. Recording Setup
a. Browse
Setup the location for saved video
files.
c. Scheduled Recordings
Users can choose a camera to setup
its Scheduled Type, Start Time and
Duration.
27
FUM-T10 Video Server Users Manual
28
FUM-T10 Video Server Users Manual
8. Alarm Setup
29
FUM-T10 Video Server Users Manual
Execute IE browser to input camera IP address or enter camera setup to click CAMERA.
Both are used to modify camera setup.
Please execute Restart function before leaving.
30
FUM-T10 Video Server Users Manual
The interface menu includes --- System, Network, Image, User, Alerts, States, View and
Support
Sub menu
Different users have different limit on the web pages. Please read 3.2.7for detils.
31
FUM-T10 Video Server Users Manual
User Nameadmin
Passwordpasswd
User Name and Password can be changed at the first time. User name and Password
must be kept carefully in mind. Tick Save this password in your password list. Password
will be save in the remote site PC.
3.2.2 Status
Status includes device name, description, MAC address, IP address, Network Mask, Gateway,
Firmware Version, Built Date, Setup Date, Current Viewers.
32
FUM-T10 Video Server Users Manual
3.2.3 View
View enables users to monitor camera. Provision of View: Scale Up, Scale Down, Record,
Snap
Main Page
Click Main Page for previous page.
Pan/Tilt Set
Click down pull option of protocol to choose Fum-MMS or Pelco-D. Choose
correct baud rate and ID. Connect Pan/Tilt and video server via RS-485 control
port.
Pan/Tilt Control
Click Up/Down/Left/Right/Stop to control Pan/Tilt.
Zoom/Focus Control
Click Zoom In/Zoom Out/Stop to control zoom lens.
Auto Pan
Pan/Tilt auto scanning feature.
Browse
System saves the files in C:\ as default directory.
Message Display
Tick Time & Date for time & date display. Tick Text for other display of
IP Address, Device Name & Description.
Snap
Please be aware of the directory of saving files prior to snap feature executed.
System generates file name promptly. Format of the file is .Bmp.
33
FUM-T10 Video Server Users Manual
Record
Please remember the directory before record button executed. Record button
will become stop button soon as recording starts. Filename will be generated to
device name plus system time. Asf is the format of the file.
Scale Up
Amplify the picture
Scale Down
Minimize the picture
34
FUM-T10 Video Server Users Manual
3.2.4 System
System Settings
System settings are time, date and area. Device name is not a setting for
administrator.
NTP
NTP makes time rectification possible via time server. Time rectification can be
pre-scheduled through local time server. NTP time server as follows:
time.nist.gov
time-A.timefreq.bldrdoc.gov
tick.stdtime.gov.tw prefer
time.stdtime.gov.tw prefer
clock.stdtime.gov.tw
IP Address Notification
Tick Notify by E-Mail and input email information. Video server will notify
users IP address change by email.
35
FUM-T10 Video Server Users Manual
3.2.5 Network
DHCP, DDNS and HTTP can be modified in Network. Click OK upon information
amended.
IP Setting
DHCP on video server detects and receives IP address from NAT network. IP
address 192.168.1.200 will be used in condition of NAT router not detected.
DHCP off video server works in static IP mode.
DDNS
Please register on http://www.dyndns.com prior to DDNS setting.
Option
HTTP control port Number: 80
36
FUM-T10 Video Server Users Manual
3.2.6 Image
Provides image format settings including resolution, compression quality and live mode
display. Picture quality adjustment includes brightness, contrast, sharpness and audio.
Image rotation provides mirror and reversal function. Please click ok upon setting finished.
Video Settings
Provides image format settings including resolution, compression quality and live
mode display. There are three options on resolution: 640*240320*240160*128.
Power line frequency50HZ/60HZ can be different from different area. Image
Quality: High/Normal/Low. Image quality will decline in condition of Max Frame
Rate. Default frame rate 30 is the second best.
Adjustment
Provides adjustment on brightness, contrast and sharpness.
37
FUM-T10 Video Server Users Manual
3.2.7 User
Provides administrator information and password setting. Provides User Name and
Password setup also. Only users in the list are authorized to enter system setup.
Administrator is the only user to get into user setup. Please click ok upon setup finished.
Admin Login
User Name and Password can be created and amended in Admin Login. User
Name and Password must be kept in mind firmly.
User Access
Click Everyone for all users viewing via network. Click Only users in
database for users in the list only viewing via network.
User Database
Administrator creates users in the list and gives authorization to the users. Input
User Name and Password. Setup authorization in Privilege down pull bar.
Click Add to save the information upon setup finished.
38
FUM-T10 Video Server Users Manual
3.2.8 Alert
Video server comes with external sensor input and motion detection. Setup parameters
can be modified. Record mode, email transmission and ftp upload can be pre-scheduled
also. Please click ok upon setup finished.
Alerts
Tick Enable to enable motion detection.
39
FUM-T10 Video Server Users Manual
User can enable or disable Movement on image, Digital Input 1 and Digital Input 2 in
Detect Method. There are five degrees for the sensitivity of Movement on image.
Record mode, email transmission and ftp upload can be pre-scheduled in Video
Record. System sends emails only if No, e-mail notify only. System sends
recorded files if Yes, and send recordings only. System sends snap pictures if
Yes, and send snaps only. Transmission can be email or ftp upload.
Recording
Pre-record time, record time and Gap to next detect can be modified.
E-mail
Create information about email transmission.
FTP
Information must be correct for ftp upload.
Back to factory default. Everything will be back to the initial including User Name,
Password and IP address.
Better restart system after amendment. Live mode must be closed prior to restart
function. It takes time to finish restart function. System gets back to Status when restart
finished. IP address should be given again if previous IP address changed while restarting.
40
FUM-T10 Video Server Users Manual
3.2.11 Upgrade
41
FUM-T10 Video Server Users Manual
4. ELSE
4.1 SPECIFICATIONS
QQVGA 160x128
File Format AVI (MPEG-4/M-JPEG video stream with 32kbps ADPCM audio)
Recorded format AVI (MPEG-4/M-JPEG video stream with 32kbps ADPCM audio)
Movement on image
Motion Detection
Digital Sensor
email
Alert Files
Email and file attached
Transmission
ftp upload
IP setup
Image Mirror
Image Reversal
Brightness
Camera Setup via IE
Contrast
Sharpness
Audio on/off
42
FUM-T10 Video Server Users Manual
X1 audio port
X1 System Reset
Weight 800g
43