Professional Documents
Culture Documents
1 MODEL CODE
QV - 06 / 6 / K ** / *
Seals material, see section :
-
Pressure compensated
= NBR
PE = FKM
flow control valve
Size: 06 BT = HNBR
Series number
Maximum adjustable flow rate: Options:
1 = 1,5 l/min 11 = 11 l/min 24 = 24 l/min K = with lock key for the setting knob
6 = 6 l/min 16 = 16 l/min V = without by-pass check valve
2 HYDRAULIC CHARACTERISTICS
Hydraulic symbols
3 MAIN CHARACTERISTICS, SEALS AND FLUIDS - for other fluids not included in below table, consult our technical office
Assembly position Any position
Ambient temperature Standard = -30C +70C /PE option = -20C +70C /BT option = -40C +70C
NBR seals (standard) = -20C +60C, with HFC hydraulic fluids = -20C +50C
Seals, recommended fluid temperature FKM seals (/PE option) = -20C +80C
HNBR seals (/BT option) = -40C +60C, with HFC hydraulic fluids = -40C +50C
Recommended viscosity 15100 mm2/s - max allowed range 2,8 500 mm2/s
Fluid contamination class ISO 4406 class 21/19/16 NAS 1638 class 10, in line filters of 25 mm (b25 >
_ 75 recommended)
Hydraulic fluid Suitable seals type Classification Ref. Standard
Mineral oils NBR, FKM, HNBR HL, HLP, HLPD, HVLP, HVLPD DIN 51524
C210
4 DIAGRAMS based on mineral oil ISO VG 46 at 50C
4.1 Regulation diagram
1 = QV-06/1
Flow [l/min]
5 = QV-06/24 4
6
4.2 Q/Dp diagram through the check 3
valve for free flow BA
2
6 = QV-06/* 1
Option /K
note 1: the manifold interface has to be provided only of the A and B ports.
The valve cannot be installed on manifolds with ISO 4401-AB-03 interface with P and T ports.
Available also version for phosphate ester (add /PE at the end of the model code).
The plates type BHQ are supplied with 4 fastening bolts M5x60 (8 for BHQ-012 and BHQ-022) to fix one (or two) QV-06 which are supplied
without fastening bolts.
02/17