Professional Documents
Culture Documents
Material:
100 % pure ePTFE (in accordance with VDE-VDI 2480)
in an expanded knot-fibre structure. This ensures a high
pressure stability (no coldflow) and a good adaptation to
Ref: L-IMP-PACKAESTEX-02
TV Test - No. MP 4/0558: Kox KD = 14.4 xbD N/mm2 to 87bar
Chem Resist. *** [ph] 0 - 14 K1 = 1.63 xbD mm
BAM Tgb.-No. 6895/89 4-2544 for oxygen with 210F, 1450psi
* Short term.
** After first heat cycle of more than240F retighten the bolts. DVGW Reg.-No. DG 5127 AU3305 Gas and Water approved
*** Except molten or dissolved alkaline metals, elementary or dissolved TA-Luft 1,7 x 10-7 mbar (l/ms)
fluorine under high pressure, non ageing. WRc-NSF Ltd
Order No. Dimension Roll Length Recommended Nominal Width Surface Pressure / Residual Thickness
10N/mm2 20N/mm2 30N/mm2
D1/1 1mm - 1/24 82ft to NW 100 0.15 0.10 0.08
D1/3 3x 1.5mm -1/8 82ft to NW 300 0.40 0.35 0.30
D1/5 5x 2mm - 3/16 82ft to NW 800 0.80 0.60 0.50
D1/7 7x 2.5mm - 1/4 82ft to NW 1500 1.00 0.80 0.70
D1/10 10x 3mm - 3/8 82ft to NW 1500 1.20 0.90 0.80
AESSEAL is a Registered Trademark of AESSEAL plc
All technical information and advice is based on our experience and will be given most conscientiously but without any liability. Indication and figures need to be examined by the user.
All sizes are subject to manufacturing tolerances. We reserve the right to modify specifications at any time.
www.aesseal.com