Professional Documents
Culture Documents
FIELD INVESTIGATIONS
Excavation of test pits upto a maximum depth of 3m below top of ground including
backfilling of pits to original condition.
Collection of undisturbed block samples (30cmx30cmx30cm) from testpits including
their waxing, labelling, packing, storage & transportation to an approved laboratory.
I
Performance of field density tests by sand replacement method in test pits generally
@ 2 tests/pit at selected horizons including ' collection of small disturbed samples
(stleast 2 Nos.) in moisture tins along with determination of moisture content and '
transportation of samples to the laboratory.
Collection of water samples (if encountered) from test pits including their labelling,
packing, storage and transportation to an approved testing laboratory.
SECTION - B
LABORATORY TESTING
Sieve Analysis I Hydrometer Analysis Liquid & Plastic Limits Pulk & Dry Density
Consolidation Test
Providing & Fixing sign board of size 3'x.4' complete in all respect as shown on
Dismantling & removal of existing material from sub & super structure of demolished /
destructed buildings, if required, and its safe disposal, at appropriate locations, all as
& it %^
SECTION-A
RETAINING WALLS
Ref, Spec. No. 1100, 2100, 4300, 6521
Trench excavation in all kinds of materials including rock and compacted backfillwifh suitable
excavated materials complete in all respect, as approved by the Engineer
Providing and laying 3" thick Class E Nominal Mix (1:4:8) concrete in retaining wall foundations,
as approved by the Engineer
1
Providing and laying Random Rubble stone masonary in 1:4 cement sand mortar with
staggered weep holes of 6"x6" size at S apart both horizontally and vertically, as approved by the
Engineer.
Providing and laying 3" thick PCC Ciass C Nominal Mix (1:2:4) coping on top of retaining wall.
Providing and laying 6" thick class "C' Nominal Mix (1:2:4) concrete Band at every 4' height as
shown on drawings.
SECTION - B WALKWAY
Ref. Spec. No. 1100, 4300, 6521,6531
Walkways of 4' width using stone pebbles and dressed stones with 1:4 cement sand mortar over
compacted earth with crevices filled in with stone pebbles, as shown on drawings, complete in all
respect, at locations specified/approved by the Engineer p
SECTION - C
BOUNDARY WALL & MAIN ENTRY GATE. Ref. Spec. No. 4200, 2100. 2300, 6521
Trench excavation in all kinds of-materials including rock and compacted backfillwith suitable
excavated materials complete in all respect, as approved by the Engineer ct
SECTION - G ____________________________
MISCELLANEOUS ITEMS
Tangly, installation, testing & commissioning
of 55 inch (1400mm) dia Ceiling fan. The 56 " c!:a ceiling fan shall be suitable to give an air
displacement of minimum 11700 Cu. ft./ min. me ceiling fan shall comprise circular fan body
metallic fan blades, down rod of suitable dia & length, AC capacitor, internal wiring, terminals all
installation & operational accessories as per fencer specifications, as per site requirements and
Supply, installation, testing & commissioning of 9 inch (300mm) dia exhaust fan The 9"
, exhaust fan shall be suitable to give an air displacement of minimum 875 Cu.ft./min. The
Providing and laying stone masonry in 1:6 c/s mortar as shown on drawing and as directed.
Providing and laying dry stone masonary' with partially open joints but adequately inter-lockec! at
Structural excavation in all kinds of soil / materia wet or dry including gravels, conglomerate etc. anc
including timbering & bracing if required, and disposal of surplus excavated material at approved designated
Providing, placing, compacting, finishing and curing PCC class C (nominal mix ratio 1.2:4) using ordinary
Providing, placing, compacting, finishing and curing RCC class B(nomina) mix ratio 1:1.5:3) using
ordinary portland cement, in walls, slabs etc. complete in all respects as per specs, drawings and as
directed.
Providing & placing course gravel or crushed stones inside the well and annular space around the
Providing, applying, finishing and curino 1.4 cement sand plaster using ordinary poniard cement on internal
with earth.
Providing and placing deformed steel reinforcement (grade 40) of various sizes/diameters with and including
the cost of transportation, loading, unloading, cutting, straightening, bending, binding, wastage and
overlapping, placing in position by concrete spacer blocks or MS chair, tying with binding wires, cost cf
chairs and wires etc. in all kinds of RCC works complete in all respects as shown on drawings and as
directed.
Supply and installation of miscellaneous items of septic tank including 2 No. C.l. cover with frames
(grade C, light duty), 2 diameter u-turned G.l. vent pipes, tees, etc. complete in all respects as shown on
Structural excavation in all kinds of soil / material wet or dry including gravels, conglomerate etc. and
including timbering & bracing if required, and disposal of surplus excavated material at approved designated
locations.
Filling and backfilling with selected soil obtained from excavation including lead and lift, watering,compaction
Providing, placing, compacting, finishing and curing RCC class B(nominal mix ratio 1:1.5:3) using ordinary
portland cement, in walls, slabs etc. complete in all respects as per specs, drawings and as directed. _
supply and installation of G.l. water^'ii ------------------------------------------------------------------------------------------ -----
conforming to BS-1387 (1985), Medium Grade ,.r all fittings, wrapmg best quality (No. 1) polythene ' tape,
making holes in concrete or masonry and then repairing holes, supports and hangers etc cf the following
Bronze Gate valves, conforming to BS-1952 standards,& shall be of 16-bars for working pressure,open &
shut indicators shall be marked on the handie.the ends may be screwed or flanged,including unions &
jointing arrangement with pipe on both ends of valves; nuts, bolts etc. complete in all respects.
(a) 1 inch
Float valves (automatic) of copper alloy, piston type conforming to B.S 1212. Float shall be of copper
confroming to B.S 1968 including unions & join mg arrangement with pipe on both ends o vav nuts, bolts etc.
Construction of brick masonry manholes inn all items and works as shown on drawing cover and O.l. frame
24"X 24" (grade C light duty) bitumen coated cast iron cover with frame(BS-497) on manholes including all
Supply, installation, testing and commissioning of horizontal/vertical plastic body double insulated wall type
water tanks of following capacity including all fittings necessary for complete installation.
(a) 500 Gallons for RWH
(b) 75 Gallons for FIRST FLUSH DIVERTER
uPVC rain water pipes conforming to ISO:3633 type "B" of the following diameters, including imported
rubber ring/solvent cement fiitings, jointing, cutting, etc. and then making it good cleaning and testing
RefTspec. 1100
Excavation in all kinds of soil for pipe trenches as per specifications and drawing, including disposal of
Filling and backfilling in pipe trenches, with selected soil obtained from excavation including watering and
compaction iri 150mm (6") thick layer and dressing to required shapes.
Supplying, stacking, filling and compacting M trenches, sand bedding material for pips ^ per
drawings.
VALVES
Ref. Specs. 5220
Bionze Gate valves, conforming to BS-1952 standards,& shall be of 16-bars for workirg pressure,open &
shut indicatiors shall be marked on the handle,the ends may be screwed or flanged,including unions &
jointing arrangement with pipe on both ends of valves; nuts, bolts etc. complete in all respects.
(a) 1.25 inch
(b) 1.5 inch
Float valves (automatic) of copper alloy,piston type and shall conform to B.S 1212. Float shall be cf copper
and shall confrom to B.S 1968 including unions & jointing arrangement with pipe on both ends of valves;
upvc Floor I rap (110x75mm) of approved mite with minimum water seal of 40mm including strainer;
making connections; breaking concrete or masonry work & then making it good; etc.
3 inches
top,short piece cast iron, transition pipe, socket plug, breaking concrete or masonry work & then
making it good, etc. complete in all respects as per drawings & specifications.
f5mm (3")
construction of 4-1/2" thick 4 c/s mortar , 3" thick 1-4.8 4 PCC in benching. (12"x12") r cover with
frame (7 kg). 1/2" thick 1:3 c/s aster on inner face. etc. complete in all isspects
following diameters, including imported miner ring/solvent cement fittings, jointing, cutting, and breaking
concrete/masonry etc. and then making it good, cleaning and testing etc.complete in all respects.
(a) 6 inches
(b) 4 inches
(c) 3 inches
(d) 2 inches
uPVC Multi Floor Trap (110x75mm),with minimum water seal of 40mm, including strainer; making recpred
number of connections; breaking JCrf e or masonry work & then making it good;
Supply and installation of Muslim Sho-^- combined with double bib-cock of approved colour inlcluding all
PPR water pipes (cold and hot) Conforming to DIM 8077-78, i/c all fittings, cutting, jointing, making holes in
concrete or masonry etc. ana then repairing holes, supports and hangers etc. of the following diameters.
(a) 1/2 inch i/d (Eq. to PPR 25mm)
(b) 3/4 inch i/d (Eq. to PPR 32mm)
(c) 1 inch i/d (Eq. to PPR 40mm)
(d) 1.25 inch i/d (Eq. to PPR 50 mm)
* (Eq. = Equivalent to; i/d = internal diameter)
Supply and installation of G.l. water pipes conforming to BS-1387 (1985), Medium Grade, i/c all fittings,
wraping best quality (No. 1) teflon tape, making holes in concrete or masonry and then repairing holes,
supports and hangers etc. of the following diameters, complete in all respects.
(a) 1 inch
Glazed earthenware Laboratory sink,(18"X24") of approved make, colour, size, shape 8< quality including
mixer for cold and hot water, t-stop cocks and all other accessories for complete installation
Supply and fix 5mm thick Glass mirror (24"Z18") , including hard board behind it and all other fittings for
Plastic shelf of approved size and shape, with plugs and screws, fixed to concrete, brick stone or wood
Toilet paper holder (SS) of any shape, pattern arid size, complete with plugs, screws etc., fixed to concrete,
Soap tray of any shape, pattern and size, complete with plugs, screws etc., fixed to concrete, bricx, stone or
CP towel rail:600mm long, 20mm dia conforming to BS 1010, complete with nuts bolts etc.
installation.
Water closet Asiatic pattern best quality v/ith integral foot rests, P-trap, t-stop cock,waste pipe, 13.5 liters
flushing cistern low down, flush pipe etc, fixed to concrete, brick, stone or wood work, in Light colour.(Orissa
900)
Water closet apparatus European pattern comprising 13.5 liters flushing cistern, seat cover,t- stop
cock,waste pipe etc., (Coupled set in Light colour), any approved size fixed to concrete, brick or stone work,
Wash hand basin of approved make, colour, size(24,,X18"), shape & quality including pedestal, bottle trap
with union 1-1/4"basin waste, tee-stop cocks,chromium plated chain and rubber plug.C P. mixer for cold and
hot water, jointing anc! sealing material, painted heavy duty brackets/fixers etc. with all accessories for
complete installation.
Glazed earthenware Laboratory sink,(18"X24") of approved make, colour, size, shape & quality including
mixer for cold and hot water, t-stop cocks and all other accessories for complete installation
Providing & placing 150 micron thick polythene sheet over partiton walls after application of bitumen
Applying 3/4" thick 1:4 smooth finished cement sand plaster over 1/2" thick 1:4 cement sand rough
plaster, including 1-1/2" wide and 3/4" thick 1:3 cement sand border and 4" wide wooden tray for
blackboards, with black Japan Paint complete in all respect and as directed by the Engineer.
3 coats of plastic emulsion paint on internal walls upto 5 height of approved quality & color,
including surface preparation by provision of a film with alkali resisting primer on internal plastered
walls to form smooth base , including dusting, rubbing with pumice stone, sand papering, filling, as
per instructions of the manufacturer, complete in all respects and as approved by the Engineer.
3 coats of vinyl emulsion paint of approved quality & color including surface preparation by
provision of a film with alkali resisting primer on internal plastered walls, and ceilings above 5'
height to form smooth base, including dusting, rubbing with pumic stone, sand papering, filling, as
per instructions of the manufacturer, complete in all respects and as approved by the Engineer.
3 coats of weather shield paint or approved equivalent on exterior walls, columns, beams, lintel, etc.
SECTION - L MISCELLANEOUS
Applying 2 coats of hot bitumen of 10/20 Grade @ 0.2 Ib/sft/coat along structural concrete in contact
Provide & Lay damp proof course, complete in all respects as per specification and shown on
drawings, in following.
Providing and Fixing 3/8" thick 2x2' PVC Laminated Gypsum board ceiling with back side aluminum
foil, including framing, hanging supports, screws, aluminum tees etc. complete in all respects, as
Supplying and fitting 24 SWG Pre Painted (Color approved by the Engineer) Gl sheet (Not Plain) roofing
including overlaps, limpets, washers, Bolts, nuts etc complete in all respects as directed by the Engineer
First Aid cabinet ( 2,x2'x9" ) with 3/4" thick imported laminated MDF board, includ'rng locks &
catchers, handle, hanging arrangement etc. as per design shown on drawings complete in all
respects.
a) 2' width
SECTION - G
Providing and fixing in position steel doors as per design shown on drawings compromising M.S. Box
section frame, MDF (imported and water proof) panels, 5 mm thick plain glass including rubber gaskets,
screws, synthetic enamel paint and red oxide paint on steel sections and matt enamel paint on MDF wood
panels, hold fasts, cutting, welding and Class 'C' concrete in hold fasts, all hardware fittings including door
a) D2
b) D3
c) D4
Steel windows comprising MS frame and MS shutter with 5mm thick local plain glass ' and/or fixed fly
screen in openable panels, as per design shown on drawings including locking arrangement,grills and all
hardware fittings as per schedule, painting with red- oxide and matt enamel paint, complete in aii respects.
V it
' a) W1 b) W2
3/4" thick 1:4 cement sand plaster on interior walls, columns, beams, slabs, stair cases etc. at
columns, beams, walls etc at Ground Floor. 14" thick 1:4 cement sand plaster on exterior
Deep struck pointing with 1:2 cement sand mortar at Ground Floor.
Deep struck pointing with 1:2 cement sand mortar at First Floor
SECTION - E
First Class burnt brick masonry in 1:4 cement sand mortar, comprising 9" and above thick walls in
foundations, complete in all respects.
First Class burnt brick masonry in 1:4 cement sand mortar, comprising 9" and above thick walls in
First Class burnt brick masonry in 1:4 cement sand mortar, comprising 9" and above thick walls in
4y2" thick brick masonry in 1:4 cement sand mortar in Ground Floor complete in all respects.
Providing and laying Reinforced Concrete Class "B" (nominal mix ratio 1:1.5;3) in foundations.
Providing and laying Reinforced Concrete Class "B" (nominal mix ratio 1:1.5:3) in the
following:
i
b)
*
Columns at First Floor
c) Plinth Beam
SECTION - Fi
Providing and laying Plain Cement Concrete Class "E" (nominal mix ratio 1:4:8) in foundation, under walls,
steps etc.
SECTION - A EARTHWORKS Ref. Spec. No. 1100
Excavation in all kinds of soil including rock, disposal of unsuitable material outside the Project limits upto
Fill & backfill with approved selected material obtained from material excavated from Project Site,
including hauling up to any lead and lift, placing in layers and compaction, etc. as approved by the Engineer
Fill with approved selected material obtained from outside source, including hauling up tc any lead and lift,