1 Isolate the incoming source and apply LOTO. Make sure that supply is not available at the i/p terminal of the 2 equipment Check bearings are sufficiently lubricated and trace of seepage 3 etc. 4 Remove and clean filters 5 Check the grill temperature 6 Check the compressor oil level if provided 7 Check cooling coil and clean 8 Check condensate drain for free flow 9 Check the incoming supplu cable and the D.B side 10 Check for water leaks/seepage on pipes,, Rectify leaks if any 11 Check Condenser coil and clean Resume the power and check the Split unit for smooth and 12 effective operation 13 Check and log the compressor and blower motor current
Split A/C No. :
1 Isolate the incoming source and apply LOTO. Make sure that supply is not available at the i/p terminal of the 2 equipment Check bearings are sufficiently lubricated and trace of seepage 3 etc. 4 Remove and clean filters
5 Check the grill temperature
6 Check the compressor oil level if provided 7 Check cooling coil and clean 8 Check condensate drain for free flow 9 Check the incoming supplu cable and the D.B side 10 Check for water leaks/seepage on pipes,, Rectify leaks if any
11 Check Condenser coil and clean
Resume the power and check the Split unit for smooth and 12 effective operation 13 Check and log the compressor and blower motor current