ZEPPeEvIN BEND
APPLICATIONS
This is probably the best of a
whole trustworthy family of
+ symmetrical bends comprising
two interlocked ovethand knots.
It works even in big stiff hawsers y)
and cables and is suitable for
everything from hobbies to
heavy industrial use.
METHOD
Rosendiahs tying method is a trifle awkward and so
an easier way (figs 1-3) has been devised by Ettrick W.
Thomson of Suffolk, England. The knot does not have
to be completely tightened before loading; itis secure
even with daylight showing through it (fig. 4).To untie
the knot, push and pull on the twin encircling bights ~
tap them with a mallet if necessary ~ until some slack
is obtained. Then, bit by bit, loosen the whole
arrangement. It is possible to untie Zeppelin bends
‘have borne loads of several hundred tonnes,