This document provides safety information for the product Glassmold 2, which is a swabbing compound composed primarily of mineral oil (73-77%) and smaller amounts of graphite and sulfur. The manufacturer is Interglass SA de CV located in Mexico. The document outlines hazards, protective measures, and safe handling practices for Glassmold 2. It behaves as a non-reactive product that poses limited health risks upon inhalation, skin/eye contact, or ingestion. Proper storage and personal protective equipment are recommended to prevent exposure.
This document provides safety information for the product Glassmold 2, which is a swabbing compound composed primarily of mineral oil (73-77%) and smaller amounts of graphite and sulfur. The manufacturer is Interglass SA de CV located in Mexico. The document outlines hazards, protective measures, and safe handling practices for Glassmold 2. It behaves as a non-reactive product that poses limited health risks upon inhalation, skin/eye contact, or ingestion. Proper storage and personal protective equipment are recommended to prevent exposure.
This document provides safety information for the product Glassmold 2, which is a swabbing compound composed primarily of mineral oil (73-77%) and smaller amounts of graphite and sulfur. The manufacturer is Interglass SA de CV located in Mexico. The document outlines hazards, protective measures, and safe handling practices for Glassmold 2. It behaves as a non-reactive product that poses limited health risks upon inhalation, skin/eye contact, or ingestion. Proper storage and personal protective equipment are recommended to prevent exposure.
Skin contact: Wash with soap and water. Eye contact: Flush eyes with plenty of water (10 - 15 minutes). Ingestion: Do not induce vomiting, get medical attention.
5.0 FIRE FIGHTING MEASURES
Extinguishing media: Foam, water spray, CO2, dry-extinguishing agents.
Not suitable: Water may cause frothing. Special equipment: Use self-contained breathing apparatus.
6.0 ACCIDENTAL RELEASE MEASURES
Personnel measures: Avoid contacts with skin and eyes.
Environmental measures: Point out to the authorities, when the product came into ground water, watercourses or canalization. Procedure of purification: After release absorbents with suitable material, dispose according to local regulations. Glassmold 2 Page 2 of 2
7.0 HANDLING AND STORAGE
Safe handling: Avoid or minimize the formation of vapors.
Storage rooms / containers: Keep cool in the original containers. On storage together: Do not store with food, drinks, and an animal food.
8.0 EXPOSITION CONTROL AND PERSONAL PROTECTION
Respiratory requirements: Breathing apparatus in case of high temperature.
Hand protection: Use oil-resistant protective gloves. Eye protection: Splash goggles or face shield. Body protection: Oil-resistant apron or other impervious clothing. Protection and Hygiene: Do not eat, drink and smoke in working place.
9.0 PHYSICAL AND CHEMICAL PROPERTIES
Form: Viscous Liquid.
Color: Black. pH Value: n/a Boling point, C Wide. Flash point, C: > 160 ASTM D-92 Solubility in water: Limited.
10.0 STABILITY AND REACTIVITY / ECOLOGICAL INFORMATION
Avoid following conditions: Do not heat over flash point.
Avoid following materials: Avoid contact with oxidizing substances. Products of decomposition: Precise decomposition is unknown. Persistence / degradation: Biological degradation is limited. Behavior in environment: Avoid income of the product in environment.
11.0 TRANSPORT INFORMATION AND REGULATIONS
No dangerous classification or special labels for its transportation are necessary.
12.0 ADDITIONAL INFORMATION
The above information is in accordance to the information required by the "Federal Osma Hazard Communication Rule, 29CFR 1910, 1200 (g) (2)."