You are on page 1of 10

iRNC

Physical Installation

UM51 Course

Copyright 2002 Nortel Networks, All Rights Reserved


Printed in France
NORTEL NETWORKS CONFIDENTIAL:
The information contained in this document is the property of Nortel Networks. Except as specifically authorized in
writing by Nortel Networks, the holder of this document shall keep the information contained herein confidential and
shall protect same in whole or in part from disclosure and dissemination to third parties and use for evaluation,
operation and maintenance purposes only.
You may not reproduce, represent, or download through any means, the information contained herein in any way or in
any form without prior written consent of Nortel Networks.
The following are trademarks of Nortel Networks Corporation: *NORTEL NETWORKS, the NORTEL NETWORKS
corporate logo, the NORTEL Globemark, HOW THE WORLD SHARES IDEAS, UNIFIED NETWORKS, BSC6000.
GSM is a trademark of France Telecom.
All other brand and product names are trademarks or registered trademarks of their respective holders.

UMT/TRD/CN/001001.05/EN February,2002
iRNC Physical Installation

Publication History

Version Date Comments

01.01/EN 20/01/01 Creation


01.02/EN Feb 2001 Sections 2 and 3 creation
01.03/EN March 2001 Evolution
01.04/EN March 2001 Modifications
01.05/EN February Section 5 creation (Power-Up)
2002

"Confidential information -- may not be copied or disclosed without permission".

UMT/TRD/CN/001001.05/EN February,2002
ii
iRNC Physical Installation

UM51 Course

Introduction 1
iRNC Site Requirements 2
iRNC Handling and Securing 3
iRNC Cabling 4
iRNC Power-Up 5

"Confidential information -- may not be copied or disclosed without permission".

UMT/TRD/CN/001001.05/EN February,2002
iii
iRNC Physical Installation

Volume Composition

No. Title Reference Version/Edition


1 iRNC Physical Installation UMT/TRD/CN/0010 01.04/EN
UM51 Course

2 iRNC Site Models UMT/ICM/INF/0003 01.02/EN


3 iRNC Site Specifications UMT/ICM/DD/0003 01.03/EN
4 iRNC Physical Installation UMT/ICM/APP/0005 01.04/EN

"Confidential information -- may not be copied or disclosed without permission".

UMT/TRD/CN/001001.05/EN February,2002
iv
iRNC Physical Installation

Course Presentation
This course is designed for technicians & engineers involved in the installation of the UMTS iRNC
product. It gives valuable know-how information about the physical installation of the iRNC.
The course material is mainly based on the relevant procedures describing the required operations to
be performed:
iRNCSiteModels,
iRNCSiteSpecifications,
iRNCphysicalInstallation,
iRNCandPP7Kancillariesspecification,

It also takes into account some parts of the Passport 7400 Hardware Installation Guide.

Other materials, such as animated slides, on-site movie or virtual images will be provided by the
instructor throughout the course progress.
Some practical on-site tour in the training lab will also be organized.

Course Objectives
Upon completion of this course, the student will be able to understand and perform the step-by-step
procedures allowing the entitled staff to install the nodes of the iRNC platform.

Prerequisites
This course is intended for people who are in charge of the installation of the iRNC platform.
Before taking this course, you need to understand basic principles for UMTS network:
UM0 UMTSIntroduction.
It is also strongly advisable to attend the UTRAN overview:
UM20 RadioAccessNetworkDescription.

Scope
This course applies to the V1.2 UMTS System Release.

"Confidential information -- may not be copied or disclosed without permission".

UMT/TRD/CN/001001.05/EN February,2002
v
iRNC Physical Installation

Page left blank intentionally

"Confidential information -- may not be copied or disclosed without permission".

UMT/TRD/CN/001001.05/EN February,2002
vi
iRNC Physical Installation

Table of Contents
COURSENOTESCONTENTS

PUBLICATIONHISTORY ii
UM51COURSE iii
VOLUMECOMPOSITION iv
COURSEPRESENTATION v
TABLEOFCONTENTS vii

1.INTRODUCTION
11

UMTSTRAININGCURRICULUM 12
OBJECTIVES 13
COURSECONTENTS 14
MATERIALSANDEQUIPMENT 15

2.iRNCSITEREQUIREMENTS
21

OBJECTIVES 22
CONTENTS 23
SITEPREPARATION 24
SITESELECTION 25
IRNCCHARACTERISTICS 26
TECHNICALROOMREQUIREMENTS 28
EQUIPMENTROOMREQUIREMENTS 29
FLOORREQUIREMENTS 210
SITECABLING 211
FINALSTATEOFPREPARATION 215

"Confidential information -- may not be copied or disclosed without permission".

UMT/TRD/CN/001001.05/EN February,2002
vii
iRNC Physical Installation

3.iRNCHANDLINGANDSECURING
31

OBJECTIVES 32
CONTENTS 33
REQUIREDDOCUMENTS&TOOLS 34
SAFETY 35
PRELIMINARYCHECKS 36
PACKAGING 37
LOADING 38
STORAGE 39
DELIVERY 310
RECEPTIONOPERATIONS 311
BRACKETINSTALLATION 314
CABINETSECURING 315
FINALOPERATIONS 317

4.iRNCCABLING
41

OBJECTIVES 42
CONTENTS 43
REQUIREDDOCUMENTS&TOOLS 44
SAFETY 45
GROUNDANDPOWERCABLESCONNECTION 46
FABRICMODULEINSTALLATION 48
ALARMMODULECONNECTION 49
PIMCONNECTION 410
MODULESINSTALLATION 411
MODULESCONNECTION 412
INTERNALCONNECTIONS 414
EXTERNALCABLESCONNECTION 416
INSTALLATION OFTHEPANELS 417

"Confidential information -- may not be copied or disclosed without permission".

UMT/TRD/CN/001001.05/EN February,2002
viii
iRNC Physical Installation

5.iRNCPOWERUP
51

OBJECTIVES 52
CONTENTS 53
SAFETY 54
POWERUP 55

"Confidential information -- may not be copied or disclosed without permission".

UMT/TRD/CN/001001.05/EN February,2002
ix
iRNC Physical Installation

Page left blank intentionally

"Confidential information -- may not be copied or disclosed without permission".

UMT/TRD/CN/001001.05/EN February,2002
x

You might also like