Professional Documents
Culture Documents
Objective:
THIS REPORT CONTAINS ANALYSIS AND DESIGN OF TWAS EAST SIDE LIFT SHAFT AND STAIRBLOCK
Page 1 of 185
Design Calculation Cover
TITLE:
BLACK & VEATCH Sheet
GES MUMBAI FORM:
Ref. No:-
Subject: Design of East side Lift shaft and Staircase block
R1
R2
R3
R4
R5
Comments (if any by Checker or Reviewer):
* ABC/D/XXX- ABC =Project Number, D= Discipline, XXX =Design Element; For Example
119/C&S/Block7
Effective Date: 1 July 2008 Prepared by: Quality Committee Authorized by: Director Mumbai
Design Calculation Cover Sheet Revision 1 First issue
Page 2 of 185
LIFT SHAFT AND STAIRCASE
BLOCK
Page 3 of 185
Number: 181344
Sheet No.
: Rev 0
Drawings
Nos. :
The lift shaft and staircase block are located on the east side of the building. The structure is
composed of RC walls and slabs. The south wall of the lift shaft is made of masonry wall
resting on RC beams. It is analyzed and designed in two distinct stages. Stage 1 where only
the lift shaft is present. This is the presumed to be the condition during construction of the
TWAS building.
In the second stage, the lift shaft, the staircase block and the connecting lobby slab are
considered.
In addition to the self weight, a superimposed load, live load, wind loads, snow loads and
earthquake loads are considered.
For the walls below ground, lateral loads due to soil and ground water are considered. In the
stage 1 analysis, lateral thrust on the walls below ground due to the movement of CL 625
truck is also considered.
The base of these blocks rest partly on existing tunnels which are in turn supported by
existing piles. For a portion of the staircase block, new piles need to be provided. The Piles
are modelled as spring supports with settlement of 12mm considered and the reactions
obtained are checked against the capacity of these piles.
To maintain continuity with the main building model, analysis of the lift shaft is
done using SAP software.
Page 5 of 185
DESIGN DATA
Page 6 of 185
TWAS_S~2.sdb 15-09-2017
98.5m level
x400
400
25
x10
400
45
0 x8
40
5
19
0 x1
40
78m level
73.61m level
4.
5
m
88.8m
85.62m
81.66m
78.33m
Page 9 of 185
BLACK & VEATCH Project number: 181344
Black & Veatch Consulting Pvt Ltd Sheet no. /
Drawings nos. Rev 0
Project name: TWAS Prepared by: SN Date: 13-Sep-17
Component: Lift shaft and staircase block Checked by: Date:
Section: Floor loads on raft level slab Reviewed by: Date:
Machine room base slab:
Live load = 12 kN/m2 (as communicated for lift and machine room)
Page 14 of 185
BLACK&VEATCH Projectnumber: 181344
Black&VeatchConsultingPvtLtd Sheetno. /
Drawingsnos. Rev 0
Projectname: TWAS Preparedby: SN Date: 10.10.16
Component: Main building Checkedby: Date:
Section: Stair Design Reviewedby: Date:
Page 15 of 185
BLACK&VEATCH Projectnumber: 181344
Black&VeatchConsultingPvtLtd Sheetno. /
Drawingsnos. Rev 0
Projectname: TWAS Preparedby: SN Date: 10.10.16
Component: Main building Checkedby: Date:
Section: Stair Design Reviewedby: Date:
Unfactored dead load in stair area = 9.35 kN/m2
nfactored dead load in landing area = 7.12 kN/m2
Page 16 of 185
BLACK & VEATCH Project number: 181344
Black & Veatch Consulting Pvt Ltd Sheet no. /
Drawings nos. Rev 0
Project name: TWAS Prepared by: SN Date: 28.08.17
Component: Lift shaft Checked by: Date:
Section: Udl on beams Reviewed by: Date:
Beam size 300x400
Weight of masonry
Weight of masonry = 6.18 kN/m2 (refer masonry wall calculations for Main building)
Max height = 5.09 m
Page 17 of 185
WIND LOADS
Page 18 of 185
BLACK & VEATCH Project number: 181344
Black & Veatch Consulting Pvt Ltd Sheet no. /
Drawings nos. Rev 0
Project name: ABTP - TWAS Prepared by: SN Date: 13.09.17
Component: Lift shaft Checked by: Date:
Section: Wind load calculations Reviewed by: Date:
Wind load calculations are based on clause 63 - Commentary I of NBC 2010 Design guide.
Roof Loads:
p (ULS) = 1.50535 kPa =1.25*0.44*1.19*2*(1+0.15)
p(SLS) = 0.903 kPa =1.50535*0.75/1.25
Page 38 of 185
BLACK & VEATCH Project number: 181344
Black & Veatch Consulting Pvt Ltd Sheet no. /
Drawings nos. Rev 0
Project name: TWAS Prepared by: SN Date: 15-Sep-17
Component: Lift shaft and staircase block Checked by: Date:
Section: seismic loads Reviewed by: Date:
Given parameters:
Sa (0.2) = 0.22
Sa (0.5) = 0.13 Section 4.1.8 of OBC
Sa (1) = 0.067
Sa (2) = 0.021
Soil category D
Importance factor = 1.5
Height of the structure = 27.9 m
0.75
Time period in X direction = 0.05(hn) (for shear walls)
= 0.607 s (Cl.4.1.8.11)
0.75
Time period in Z direction = 0.05(hn) (for shear walls)
= 0.607 s (Cl.4.1.8.11)
Mvx = 1
Mvz = 1
Jx = 1
Jz = 1
Considering a moderately ductile concentrically braced frame,
Rd = 1.5 (conventional construction shear wall considered)
Ro = 1.3
Owner: TWAS Prepared by: SN
Plant: TWAS Date:04.12.16
Unit: Lift shaft Verified by: Nagaraju NV
Project No.: 181344 Date: 04.12.16
Title: Seismic Load Calculation per NBC-10 Page No.: 1 of 11
Revision: 1.0
1.0 Objective. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.0 References. . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3.0 Design Basis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
4.0 Definition of Units & Constants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5.0 Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Attachments
Attachment A - NBC 2010 SEISMIC LOADS FOR BUILDINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 10
Attachment B - NBC 2010 SEISMIC LOADS FOR NON-STRUCTURAL COMPONENTS. . . . . . . . . . . 10
Owner: TWAS Prepared by: SN
Plant: TWAS Date:04.12.16
Unit: Lift shaft Verified by: Nagaraju NV
Project No.: 181344 Date: 04.12.16
Title: Seismic Load Calculation per NBC-10 Page No.: 2 of 11
Revision: 1.0
1.0 Objective:
This calculation determines Equivalent Static Seismic Design Load on structures in accordance with the requirements of
NBC-10 and project design criteria.
2.0 References:
1. Project Design Manual
2. National Building Cod of Canada 2010
3. User's Guide - NBC 2010 Structural Commentaries (Part 4 of Division B) - Third Edition.
4.
5.
6. Project Final Geotechnical Report, File No.______________________
7.
8.
9.
10. B&V Drawing No. _____________________________ REV. ____________________
11. B&V Drawing No. _____________________________REV._____________________
2> Dynamic analysis must be used except that the Equivalent Static Force Procedure may be used for structures that meet any of the
following criteria:
a> In cases where IEFaSa(0.2) is less than 0.35
b> regular structures that are less than 60m in height and have a fundamental lateral period Ta, less than 2s in each of two orthogonal
directions as defined in Ref #2 clause 4.1.8.8
c> structures with structural irregularity, of Type 1,2,3 4, 5, 6 or 8 as defined in Ref #2 table 4.1.8.6, that are less than 20m in height and
have a fundamental lateral period Ta less than 0.5s in each of two orthogonal directions as defined in Ref #2 clause 4.1.8.8
Constants:
m
g = 9.807
2
s
5.0 Analysis:
Details of the calculations are included in the design attachments.
Owner: TWAS Prepared by: SN
Plant: TWAS Date:04.12.16
Unit: Lift shaft Verified by: Nagaraju NV
Project No.: 181344 Date: 04.12.16
Title: Seismic Load Calculation per NBC-10 Page No.: 3 of 11
Revision: 1.0
5% damped 0.2s Spectral Response Acceleration (g) Sa_0.2 := 0.22 Ref #2, Appendix C, Table C-2
5% damped 0.5s Spectral Response Acceleration (g) Sa_0.5 := 0.13 Ref #2, Appendix C, Table C-2
5% damped 1.0s Spectral Response Acceleration (g) Sa_1 := 0.067 Ref #2, Appendix C, Table C-2
5% damped 1.0s Spectral Response Acceleration (g) Sa_2 := 0.021 Ref #2, Appendix C, Table C-2
SFRS Overstrength-Related Force Modification Factor: Ro := 1.3 Ref #2, Table 4.1.8.9
SFRS Ductility-Related Force Modification Factor: Rd := 1.5 Ref #2, Table 4.1.8.9
(Shear walls)
Importance Factor:
Ref #2, Table 4.1.8.5
ImportanceFactorTable :=
0 1
1 "Low" 0.8
2 "Normal" 1
3 "High" 1.3
4 "Post-disaster" 1.5
LateralTypeVector :=
0
1 "Coupled Walls"
2 "Braced Frames"
3 "Walls,wall-frame systems"
4 "Other systems"
Structure Type:
StructureTypeVector :=
0
Ref #2, Table 4.1.8.9
0 "Concrete"
1 "Steel"
2 "Wood"
3 "Masonry"
SiteClass :=
0 1 2 3 4 5
T
SiteClassVector := SiteClass
SC := SiteClassVectorSCNumber = "D"
0.75
Ta_shear_wall ( h) := 0.05
h Ref #2, clause 4.1.8.11.3 (c)
m
Ta := if Lateraltype = LateralTypeVector 2 = 0.608
Ta Ta_braced_frame ( hn )
return Ta
if Lateraltype = LateralTypeVector 0 StructureType = StructureTypeVector1
Ta Ta_steel_moment_frame ( hn )
return Ta
if Lateraltype = LateralTypeVector 0 StructureType = StructureTypeVector0
Ta Ta_concrete_moment_frame ( hn )
return Ta
if StructureType = LateralTypeVector 0
Ta Ta_other_type_moment_frame ( Nstorey)
return Ta
if Lateraltype = LateralTypeVector 1 Lateraltype = LateralTypeVector 3 Lateraltype = LateralTypeVector 4
Ta Ta_shear_wall ( hn )
return Ta
Owner: TWAS Prepared by: SN
Plant: TWAS Date:04.12.16
Unit: Lift shaft Verified by: Nagaraju NV
Project No.: 181344 Date: 04.12.16
Title: Seismic Load Calculation per NBC-10 Page No.: 6 of 11
Revision: 1.0
Fa = 1.3
Owner: TWAS Prepared by: SN
Plant: TWAS Date:04.12.16
Unit: Lift shaft Verified by: Nagaraju NV
Project No.: 181344 Date: 04.12.16
Title: Seismic Load Calculation per NBC-10 Page No.: 7 of 11
Revision: 1.0
Fv = 1.4
Sa ( T) := Fa Sa_0.2 if T 0.2
T := 0 , 0.01 .. 6
Owner: TWAS Prepared by: SN
Plant: TWAS Date:04.12.16
Unit: Lift shaft Verified by: Nagaraju NV
Project No.: 181344 Date: 04.12.16
Title: Seismic Load Calculation per NBC-10 Page No.: 8 of 11
Revision: 1.0
0.3
0.27
0.24
Spectral Response Acceleration(g)
0.21
0.18
Sa ( T) 0.15
0.12
0.09
0.06
0.03
0
0 0.6 1.2 1.8 2.4 3 3.6 4.2 4.8 5.4 6
T
Period T(s)
Ref #2, Table 4.1.8.11, Higher Mode Factor Mv. Table T3A is for S.a(0.2)/S.a(2.0) < 8.0
T3A :=
0 1 2 3
0 "Lateral Resisting System" "T.a<=1.0" "T.a = 2.0" "T.a >= 4.0"
1 "Moment resisting frames" 1 1 1
2 "Coupled Walls" 1 1 1
3 "Braced Frames" 1 1 1
4 "Walls,wall-frame systems" 1 1.2 1.6
5 "Other systems" 1 1.2 1.2
Ref #2, Table 4.1.8.11, Overturning Reduction Factor J. T.3B is for S.a(0.2)/S.a(2.0) < 8.0
T4A :=
0 1 2 3
0 "Lateral Resisting System" "T.a<=0.5" "T.a = 2.0" "T.a >= 4.0"
1 "Moment resisting frames" 1 0.9 0.9
2 "Coupled Walls" 1 0.9 0.8
3 "Braced Frames" 1 0.8 0.8
4 "Walls,wall-frame systems" 1 0.6 0.5
5 "Other systems" 1 0.6 0.6
T4B :=
0 1 2 3
0 "Lateral Resisting System" "T.a<=0.5" "T.a = 2.0" "T.a >= 4.0"
1 "Moment resisting frames" 1 0.7 0.7
2 "Coupled Walls" 1 0.7 0.6
3 "Braced Frames" 1 0.6 0.6
4 "Walls,wall-frame systems" 1 0.4 0.3
5 "Other systems" 1 0.4 0.4
Sa_0.2 Sa_0.2
TableM.v := T3A if < 8 TableJ := T4A if < 8
Sa_2 Sa_2
T3B otherwise T4B otherwise
Mv = 1 Je = 1.235
Sa ( Ta) Mv IE We
Ve := = 0.125 kN Ref #2, Clause 4.1.8.11 (2)
Rd Ro
2 Sa ( 0.2) IE We
Vmax := = 0.147 kN Ref #2, Clause 4.1.8.11 (2).(c)
3 Rd Ro
Sa ( 4.0) Mv IE We minimum seismic load for walls, coupled walls and wall-frame systems, Ref #2,
Vmin_wall := = 0.011 kN
Rd Ro Clause 4.1.8.11 (2).(a)
Sa ( 2.0) Mv IE We minimum seismic load for moment resisting frames, braced frames, Ref #2,
Vmin := = 0.023 kN
Rd Ro Clause 4.1.8.11.(2).(b)
Vd := V1 0kN = 0.125 kN
V2 0kN
if Lateraltype = LateralTypeVector 1 Lateraltype = LateralTypeVector 3
V1 Vmin_wall
V2 max ( Ve , V1 )
if Lateraltype = LateralTypeVector 0 Lateraltype = LateralTypeVector 2 Lateraltype = LateralTypeVector 4
V1 Vmin
V2 max ( Ve , V1 )
if SC SiteClassVector5 Rd 1.5
V3 min ( Vmax , V2 )
return V3
return V2
=
Owner: TWAS Prepared by: SN
Plant: TWAS Date:04.12.16
Unit: Lift shaft Verified by: Nagaraju NV
Project No.: 181344 Date: 04.12.16
Title: Seismic Load Calculation per NBC-10 Page No.: 11 of 11
Revision: 1.0
hx
Sp := Ax 1 + 2 = 1.372 Ref #2, Clause 4.1.8.18.(1)
hn
Cp Ar Ax
St
Rp
St 4.0 if St > 4.0
St 0.7 if St < 0.7
return St
Page 51 of 185
BLACK&VEATCH Projectnumber: 181344
Black&VeatchConsultingPvtLtd Sheetno. /
Drawingsnos. Rev 0
Projectname: TWAS Preparedby: SN Date: 29Nov16
Component: Lift shaft Checkedby: AN Date:
Section: Snowloads Reviewedby: AN Date:
Based on OBC clause 4.1.6
Inputs
Importance category of structure = Post disaster
Importance factor (ULS) Is = 1.25 (as per spec)
Importance factor (SLS) Is = 0.9 (as per spec)
1 in 50 year ground snow load Ss = 0.9 kPa (as per mail)
1 in 50 year associated rain load Sr = 0.4 kPa (as per spec)
Basic roof snow load factor Cb = 0.8 (for normal roof)
Wind exposure factor Cw = 1 (as per spec)
Slope factor Cs = 1 (for slope< 30 deg)
Shape factor Ca = 1 (for normal roof)
Page 52 of 185
Snow load calculation for lift shaft roof
Owner: Prepared by: SN
Plant: TWAS Date: 29.11.16
Unit: Lift shaft roof Verified by: Nagaraju NV
Project No.: 181344 Date:
Title: Snow Load Calculation for Page No.: 1 of 15
Multilevel Roofs as per NBC-10 Revision: 1.0
1.0 Objective
The purpose of this calculation is to calculate roof snow loads, including drift and sliding loads as per the National
Building Code of Canada 2010
2.0 References
1. Project Design Manual
2. NBC-10, National Building Code of Canada 2010 Volume 1
3. User's Guide - NBC 2010 Structural Commentaries (Part 4 of Division B)
4. CISC, Handbook of Steel Construction - Tenth Edition, Canadian Institute of Steel Construction
5. CSA A23.3 - 14, Design of Concrete Structures, Canadian Standards Association
6. B&V Calculation No.
7. B&V Calculation No.
8. B&V Drawing No.
9. B&V Drawing No.
10. Vendor Drawing No.
3.0 Assumptions
1. Neither the Lower nor Upper roof have a parapet
2. Neither the Lower nor Upper roof are defined by valleys, domes, ext
5.0 Units
kPa 1000 Pa kN 1000 N false 0 true 1
kN
4.0
Unit weight of snow 3
m
The building and roof satisfy Reference 2) sentences w1 false Reference 2- Division B
4.1.6.2 3) and 4) Clause 4.1.6.2 (3) & (4)
Lower Roof
length l 4.265m
Roof Planar Dimensions of roof being analyzed
Length = longer dimension, Width = shorter dimension widthl 3.5m
Edge of Lower Roof that boarders wall for Upper Roof edge "length"
("width" or "length")
The roof is slippery and unobstructed where snow and ice can slide
completely off s1 false
The roof is subject to snow sliding or meltwater from adjacent roofs s2 true
Higher Roof
Height of wall between lower roof and upper roof. Measured from
where the base of the wall meets the lower roof to the top of the height 0m
vertical obstruction.
Higher roof is present and sloped where snow may slide or drift off
onto lower roof higher false
length h 0m
Roof Planar Dimensions of higher roof
Length = longer dimension, Width = shorter dimension widthh 0m
The higher roof is slippery and unobstructed where snow and ice s1h false
can slide completely off
The higher roof is subject to snow sliding or meltwater from other s2h true
adjacent roofs
Is 0.8 if Ic = "low"
Reference 2
1 if Ic = "normal" Division B Table 4.1.6.2
1.15 if Ic = "high"
1.25 if Ic = "post-disaster"
"NG" otherwise
Is 1.250
Cw 1.000
characteristic length
2 Reference 2 Division B
widthl
lc 2 widthl 4.128 m Clause 4.1.6.2 (2)
length l
2
Cb 1 30 if Cw = 1 lc 70m
lc
m Reference 2 Division B
2 Clause 4.1.6.2 (2)
1.3 140
lc if ( Cw = 0.75 Cw = 0.5) lc 200m
m
0.8 otherwise
Cb 0.800
Cs 1.0 if s2 = 1
0 if slopel 60 s1 = 1 s2 = 0
60 slopel
if 15 slopel 60 s1 = 1 s2 = 0
45
Reference 2 Division B
1.0 if slopel 15 s1 = 1 s2 = 0 Clause 4.1.6.2 (5), (6) & (7)
0 if slopel 70 s1 = 0 s2 = 0
70 slopel
if 30 slopel slopel 70 s1 = 0 s2 = 0
40
1.0 if slopel 30 s1 = 0 s2 = 0
Cs 1.000
Shape factor Ca
Ca 1.000
Check Sr
Sr need not be taken as larger than Ss*Cb*Cw*Cs*Ca
Sr 0.4 kPa
Reference 2 Division B
Ss Cb Cw Cs Ca 0.72 kPa Clause 4.1.6.2 (1)
Flat snow load, with no drifting against obstructions, and no sliding or drifting from higher roofs.
xd 5 height Cb
Ss
0.9 m Reference 3
Commentary G equation (6)
h p 0 parapet height
Reference 3
0.5 Commentary G paragraph 38
lch hp
2
f1 0.35 6 Cb 0.8
Ss Ss
Reference 3
Commentary G equation (4)
F f1 if f1 2
2 otherwise
F2
xd1 5
Ss Reference 3
( F Cb) 1.35 m Commentary G equation (7)
xd xd1 if xd1 xd
xd otherwise
xd 0.9 m
height
Ca0 0 Reference 3
( Cb Ss) Commentary G equation (2)
F
Ca1 2.5 Reference 3
Cb Commentary G equation (3)
Ca0 0
20 height
m F
Ca2 1
1 4
10 Cb
Reference 3
2 Commentary G paragraph 39
areal widthl length l 14.927 m
2
Ca0 Ca2 if areal 25m 10m height height 20m
2
1.0 if areal 25m height 20m
Ca0 otherwise
Ca0 0
Check Sr
Sr need not be taken as larger than Ss*Cb*Cw*Cs*Ca
Ss Cb Cw Cs Ca0 0 kPa
Sr2 0 kPa
S0 0 kPa
Cwh 1.000
2
Cb h 1 30m if Cwh = 1 lch 70m
lc
h Reference 2 Division B
2 Clause 4.1.6.2 (2)
1.3 140m if Cwh = 0.75 Cwh = 0.5 lch 200m
lc
h
0.8 otherwise
Cb h 0.800
Csh 1.000
Shape factor Ca
Cah 1.000
Check Sr
Sr need not be taken as larger than Ss*Cb*Cw*Cs*Ca
Reference 2 Division B
Ss Cb h Cwh Csh Cah 0.72 kPa Clause 4.1.6.2 (1)
Flat snow load on higher roof, with no drifting against obstructions, and no sliding or drifting
from other higher roofs.
length t 0
h2 2 height o 0 Reference 3
Figure G-8
xdo ( 3m) if h2 3m
( 9m) if h2 9m
h2 otherwise
xdo 3 m
Reference 3 Commentary G
height o
Ca0h 0.67 0 paragraph 42
Cb h Ss
0.8 0.8
Ca0h if Ca0h obs = 1
Cb h Cb h
2 2 Reference 3
if Ca0h obs = 1 Figure G-8
Cb h Cb h
2
Ca0h if Ca0h obs = 1
Cb h
Cah otherwise
Ca0h 1
Check Sr
Sr need not be taken as larger than Ss*Cb*Cw*Cs*Ca
Obstruction Width
Ss
S0h Sh if widtho 3
S0h otherwise
S0h Sh setback
otherwise
xdo
Sxh 0 kPa
Sliding Load
S0h Sxh kN
Reference 3 Commentary G
paragraph 41
SL o slide xdo 0.5 Sxh slide setback 0.5 0
2 m
kN kN
SL 0 SL o 0 Reference 3 Commentary G
m m paragraph 41
SL SL o if SL o SL
SL otherwise
kN
SL 0
m
2SL
Sl 0 kPa
xd
St Sl S0 0 kPa
St 0 kPa
S 1.4 kPa
xd 0.9 m
Upper Roof
Lower Roof
length s 3.5 m
Sx S if length s xd
St S lengths
otherwise
xd
Sx 1.4 kPa
St S gap
Sa St 0 kPa
xd
gap 0 m Gap between Lower Roof and wall under Upper Roof
Extent of the drift away from the base of the obstruction x(d)
xd 0.9 m Snow Load drops to Sx after this length if the Lower Roof is
longer than the drift length
Upper Roof
1.0 Objective
The purpose of this calculation is to calculate roof snow loads, including drift and sliding loads as per the National
Building Code of Canada 2010
2.0 References
1. Project Design Manual
2. NBC-10, National Building Code of Canada 2010 Volume 1
3. User's Guide - NBC 2010 Structural Commentaries (Part 4 of Division B)
4. CISC, Handbook of Steel Construction - Tenth Edition, Canadian Institute of Steel Construction
5. CSA A23.3 - 14, Design of Concrete Structures, Canadian Standards Association
6. B&V Calculation No.
7. B&V Calculation No.
8. B&V Drawing No.
9. B&V Drawing No.
10. Vendor Drawing No.
3.0 Assumptions
1. Neither the Lower nor Upper roof have a parapet
2. Neither the Lower nor Upper roof are defined by valleys, domes, ext
5.0 Units
kPa = 1000 Pa kN = 1000 N false := 0 true := 1
kN
:= 4.0
Unit weight of snow 3
m
The building and roof satisfy Reference 2) sentences w1 := false Reference 2- Division B
4.1.6.2 3) and 4) Clause 4.1.6.2 (3) & (4)
Lower Roof
length l := 10.5m
Roof Planar Dimensions of roof being analyzed
Length = longer dimension, Width = shorter dimension widthl := 5m
Edge of Lower Roof that boarders wall for Upper Roof edge := "width"
("width" or "length")
The roof is slippery and unobstructed where snow and ice can slide
completely off s1 := false
The roof is subject to snow sliding or meltwater from adjacent roofs s2 := true
Higher Roof
Height of wall between lower roof and upper roof. Measured from
where the base of the wall meets the lower roof to the top of the height := 12.97m
vertical obstruction.
Higher roof is present and sloped where snow may slide or drift off
onto lower roof higher := true
length h := 4.5m
Roof Planar Dimensions of higher roof
Length = longer dimension, Width = shorter dimension widthh := 3.5m
The higher roof is slippery and unobstructed where snow and ice s1h := true
can slide completely off
The higher roof is subject to snow sliding or meltwater from other s2h := false
adjacent roofs
Is := 0.8 if Ic = "low"
Reference 2
1 if Ic = "normal" Division B Table 4.1.6.2
1.15 if Ic = "high"
1.25 if Ic = "post-disaster"
"NG" otherwise
Is = 1.250
Cw = 1.000
characteristic length
widthl
2 Reference 2 Division B
lc := 2 widthl = 7.619 m Clause 4.1.6.2 (2)
length l
2
Cb := 1 30 if Cw = 1 lc 70m
lc
m
Reference 2 Division B
2 Clause 4.1.6.2 (2)
1.3 140 if ( Cw = 0.75 Cw = 0.5) lc 200m
lc
m
0.8 otherwise
Cb = 0.800
Cs := 1.0 if s2 = 1
0 if slopel > 60 s1 = 1 s2 = 0
( 60 slopel)
if 15 < slopel 60 s1 = 1 s2 = 0
45
Reference 2 Division B
1.0 if slopel 15 s1 = 1 s2 = 0 Clause 4.1.6.2 (5), (6) & (7)
0 if slopel > 70 s1 = 0 s2 = 0
( 70 slopel)
if 30 < slopel slopel 70 s1 = 0 s2 = 0
40
1.0 if slopel 30 s1 = 0 s2 = 0
Cs = 1.000
Shape factor Ca
Ca = 1.000
Check Sr
Sr need not be taken as larger than Ss*Cb*Cw*Cs*Ca
Sr = 0.4 kPa
Reference 2 Division B
Ss Cb Cw Cs Ca = 0.72 kPa Clause 4.1.6.2 (1)
Flat snow load, with no drifting against obstructions, and no sliding or drifting from higher roofs.
xd := 5 height Cb
Ss
= 63.95 m Reference 3
Commentary G equation (6)
h p := 0 parapet height
Reference 3
0.5 Commentary G paragraph 38
( lch) hp
2
f1 := 0.35 6 + Cb = 2.326
Ss Ss
Reference 3
Commentary G equation (4)
F := f1 if f1 > 2
2 otherwise
F = 2.326
xd1 := 5
Ss Reference 3
( F Cb) = 1.717 m Commentary G equation (7)
xd = 1.717 m
height
Ca0 := = 72.056 Reference 3
( Cb Ss) Commentary G equation (2)
F
Ca1 := = 2.908 Reference 3
Cb Commentary G equation (3)
Ca0 = 2.908
20 height
m F
Ca2 := 1 +
1 = 2.341
10 Cb
Reference 3
2 Commentary G paragraph 39
areal := widthl length l = 52.5 m
2
Ca0 := Ca2 if areal < 25m 10m < height height 20m
2
1.0 if areal < 25m height > 20m
Ca0 otherwise
Ca0 = 2.908
Check Sr
Sr need not be taken as larger than Ss*Cb*Cw*Cs*Ca
S0 = 3.117 kPa
Cwh = 1.000
2
Cb h := 1 30m if Cwh = 1 lch 70m
lc
h Reference 2 Division B
2 Clause 4.1.6.2 (2)
1.3 140m if ( Cwh = 0.75 Cwh = 0.5) lch 200m
lc
h
0.8 otherwise
Cb h = 0.800
( 60 slopeh)
if 15 < slopeh 60 s1h = 1 s2h = 0
45 Reference 2 Division B
Clause 4.1.6.2 (5), (6) & (7)
1.0 if slopeh 15 s1h = 1 s2h = 0
0 if slopeh > 70 s1h = 0 s2h = 0
( 70 slopeh)
if 30 < slopeh slopeh 70 s1h = 0 s2h = 0
40
1.0 if slopeh 30 s1h = 0 s2h = 0
Csh = 1.000
Shape factor Ca
Cah = 1.000
Check Sr
Sr need not be taken as larger than Ss*Cb*Cw*Cs*Ca
Reference 2 Division B
Ss Cb h Cwh Csh Cah = 0.72 kPa Clause 4.1.6.2 (1)
Flat snow load on higher roof, with no drifting against obstructions, and no sliding or drifting
from other higher roofs.
length t = 4.5 m
xdo = 3 m
height o
Reference 3 Commentary G
Ca0h := 0.67 = 1.489 paragraph 42
Cb h Ss
0.8 0.8
Ca0h := if Ca0h < obs = 1
Cb h Cb h
2 2 Reference 3
if Ca0h > obs = 1 Figure G-8
Cb h Cb h
2
Ca0h if Ca0h obs = 1
Cb h
Cah otherwise
Ca0h = 1.489
Check Sr
Sr need not be taken as larger than Ss*Cb*Cw*Cs*Ca
Obstruction Width
Ss
S0h := Sh if widtho 3
S0h otherwise
Sxh = 0 kPa
Sliding Load
( S0h Sxh) kN
Reference 3 Commentary G
paragraph 41
SL o := slide xdo 0.5 + Sxh slide setback 0.5 = 1.05
2 m
kN kN
SL = 3.15 SL o = 1.05 Reference 3 Commentary G
m m paragraph 41
SL := SL o if SL o > SL
SL otherwise
kN
SL = 3.15
m
2SL
Sl := = 3.669 kPa
xd
St := Sl + S0 = 6.786 kPa
St = 6.786 kPa
S = 1.4 kPa
xd = 1.717 m
Upper Roof
Lower Roof
length s = 10.5 m
Sx := S if length s > xd
( St S) lengths
otherwise
xd
Sx = 1.4 kPa
( St S) gap
Sa := St = 6.786 kPa
xd
gap = 0 m Gap between Lower Roof and wall under Upper Roof
Extent of the drift away from the base of the obstruction x(d)
xd = 1.717 m Snow Load drops to Sx after this length if the Lower Roof is
longer than the drift length
8.2 kPa
1.4 kPa
1.7m
Average load on 1.7m slab from the lift shaft end = (8.2+1.4)/2 = 4.8kPa
Upper Roof
1.0 Objective
The purpose of this calculation is to calculate roof snow loads, including drift and sliding loads as per the National
Building Code of Canada 2010
2.0 References
1. Project Design Manual
2. NBC-10, National Building Code of Canada 2010 Volume 1
3. User's Guide - NBC 2010 Structural Commentaries (Part 4 of Division B)
4. CISC, Handbook of Steel Construction - Tenth Edition, Canadian Institute of Steel Construction
5. CSA A23.3 - 14, Design of Concrete Structures, Canadian Standards Association
6. B&V Calculation No.
7. B&V Calculation No.
8. B&V Drawing No.
9. B&V Drawing No.
10. Vendor Drawing No.
3.0 Assumptions
1. Neither the Lower nor Upper roof have a parapet
2. Neither the Lower nor Upper roof are defined by valleys, domes, ext
5.0 Units
kPa = 1000 Pa kN = 1000 N false := 0 true := 1
kN
:= 4.0
Unit weight of snow 3
m
The building and roof satisfy Reference 2) sentences w1 := false Reference 2- Division B
4.1.6.2 3) and 4) Clause 4.1.6.2 (3) & (4)
Lower Roof
length l := 10.5m
Roof Planar Dimensions of roof being analyzed
Length = longer dimension, Width = shorter dimension widthl := 5m
Edge of Lower Roof that boarders wall for Upper Roof edge := "length"
("width" or "length")
The roof is slippery and unobstructed where snow and ice can slide
completely off s1 := false
The roof is subject to snow sliding or meltwater from adjacent roofs s2 := true
Higher Roof
Height of wall between lower roof and upper roof. Measured from
where the base of the wall meets the lower roof to the top of the height := 10m
vertical obstruction.
Higher roof is present and sloped where snow may slide or drift off
onto lower roof higher := true
length h := 54m
Roof Planar Dimensions of higher roof
Length = longer dimension, Width = shorter dimension widthh := 27m
The higher roof is slippery and unobstructed where snow and ice s1h := true
can slide completely off
The higher roof is subject to snow sliding or meltwater from other s2h := false
adjacent roofs
Is := 0.8 if Ic = "low"
Reference 2
1 if Ic = "normal" Division B Table 4.1.6.2
1.15 if Ic = "high"
1.25 if Ic = "post-disaster"
"NG" otherwise
Is = 1.250
Cw = 1.000
characteristic length
widthl
2 Reference 2 Division B
lc := 2 widthl = 7.619 m Clause 4.1.6.2 (2)
length l
2
Cb := 1 30 if Cw = 1 lc 70m
lc
m
Reference 2 Division B
2 Clause 4.1.6.2 (2)
1.3 140 if ( Cw = 0.75 Cw = 0.5) lc 200m
lc
m
0.8 otherwise
Cb = 0.800
Cs := 1.0 if s2 = 1
0 if slopel > 60 s1 = 1 s2 = 0
( 60 slopel)
if 15 < slopel 60 s1 = 1 s2 = 0
45
Reference 2 Division B
1.0 if slopel 15 s1 = 1 s2 = 0 Clause 4.1.6.2 (5), (6) & (7)
0 if slopel > 70 s1 = 0 s2 = 0
( 70 slopel)
if 30 < slopel slopel 70 s1 = 0 s2 = 0
40
1.0 if slopel 30 s1 = 0 s2 = 0
Cs = 1.000
Shape factor Ca
Ca = 1.000
Check Sr
Sr need not be taken as larger than Ss*Cb*Cw*Cs*Ca
Sr = 0.4 kPa
Reference 2 Division B
Ss Cb Cw Cs Ca = 0.72 kPa Clause 4.1.6.2 (1)
Flat snow load, with no drifting against obstructions, and no sliding or drifting from higher roofs.
xd := 5 height Cb
Ss
= 49.1 m Reference 3
Commentary G equation (6)
h p := 0 parapet height
Reference 3
0.5 Commentary G paragraph 38
( lch) hp
2
f1 := 0.35 6 + Cb = 5.496
Ss Ss
Reference 3
Commentary G equation (4)
F := f1 if f1 > 2
2 otherwise
F = 5.496
xd1 := 5
Ss Reference 3
( F Cb) = 5.283 m Commentary G equation (7)
xd = 5.283 m
height
Ca0 := = 55.556 Reference 3
( Cb Ss) Commentary G equation (2)
F
Ca1 := = 6.87 Reference 3
Cb Commentary G equation (3)
Ca0 = 6.87
20 height
m F
Ca2 := 1 +
1 = 6.87
10 Cb
Reference 3
2 Commentary G paragraph 39
areal := widthl length l = 52.5 m
2
Ca0 := Ca2 if areal < 25m 10m < height height 20m
2
1.0 if areal < 25m height > 20m
Ca0 otherwise
Ca0 = 6.87
Check Sr
Sr need not be taken as larger than Ss*Cb*Cw*Cs*Ca
S0 = 6.683 kPa
Cwh = 1.000
2
Cb h := 1 30m if Cwh = 1 lch 70m
lc
h Reference 2 Division B
2 Clause 4.1.6.2 (2)
1.3 140m if ( Cwh = 0.75 Cwh = 0.5) lch 200m
lc
h
0.8 otherwise
Cb h = 0.800
( 60 slopeh)
if 15 < slopeh 60 s1h = 1 s2h = 0
45 Reference 2 Division B
Clause 4.1.6.2 (5), (6) & (7)
1.0 if slopeh 15 s1h = 1 s2h = 0
0 if slopeh > 70 s1h = 0 s2h = 0
( 70 slopeh)
if 30 < slopeh slopeh 70 s1h = 0 s2h = 0
40
1.0 if slopeh 30 s1h = 0 s2h = 0
Csh = 1.000
Shape factor Ca
Cah = 1.000
Check Sr
Sr need not be taken as larger than Ss*Cb*Cw*Cs*Ca
Reference 2 Division B
Ss Cb h Cwh Csh Cah = 0.72 kPa Clause 4.1.6.2 (1)
Flat snow load on higher roof, with no drifting against obstructions, and no sliding or drifting
from other higher roofs.
length t = 27 m
xdo = 3 m
height o
Reference 3 Commentary G
Ca0h := 0.67 = 1.489 paragraph 42
Cb h Ss
0.8 0.8
Ca0h := if Ca0h < obs = 1
Cb h Cb h
2 2 Reference 3
if Ca0h > obs = 1 Figure G-8
Cb h Cb h
2
Ca0h if Ca0h obs = 1
Cb h
Cah otherwise
Ca0h = 1.489
Check Sr
Sr need not be taken as larger than Ss*Cb*Cw*Cs*Ca
Obstruction Width
Ss
S0h := Sh if widtho 3
S0h otherwise
Sxh = 0 kPa
Sliding Load
( S0h Sxh) kN
Reference 3 Commentary G
paragraph 41
SL o := slide xdo 0.5 + Sxh slide setback 0.5 = 1.05
2 m
kN kN
SL = 18.9 SL o = 1.05 Reference 3 Commentary G
m m paragraph 41
SL := SL o if SL o > SL
SL otherwise
kN
SL = 18.9
m
2SL
Sl := = 7.155 kPa
xd
St := Sl + S0 = 13.838 kPa
St = 13.838 kPa
S = 1.4 kPa
xd = 5.283 m
Upper Roof
Lower Roof
length s = 5 m
Sx := S if length s > xd
( St S) lengths
otherwise
xd
Sx = 11.772 kPa
( St S) gap
Sa := St = 13.838 kPa
xd
gap = 0 m Gap between Lower Roof and wall under Upper Roof
Extent of the drift away from the base of the obstruction x(d)
xd = 5.283 m Snow Load drops to Sx after this length if the Lower Roof is
longer than the drift length
13.838 kPa
11.772 kPa
4.8m
Average load on 4.8m slab from the lift shaft end = (13.838+11.772)/2
= 12.805kPa
Upper Roof
Loading conditions :
1 DL
2 LL
Soil with Normal Ground Water + Compaction
3 H1
+ LL surcharge
4 Soil with 100 years Flood + LL Surcharge H2
Soil dynamic load
5 X- direction Esx
6 Z- direction Esz
7 Normal Ground water Level (NGWT) Fa1
8 Flood Level Fa2
3.Soil with Normal Ground Water + Compaction + LL surcharge:
Load on wall
6.3 19 25.3 =(6.3+19)
1.23
4.72 + = H1
Loading conditions :
1 DL
2 LL
Soil with Normal Ground Water + Compaction
3 H1
+ LL surcharge
4 Soil with 100 years Flood + LL Surcharge H2
Soil dynamic load
5 X- direction Esx
6 Z- direction Esz
7 Normal Ground water Level (NGWT) Fa1
8 Flood Level Fa2
3.Soil with Normal Ground Water + Compaction + LL surcharge:
Load on wall
6.3 19 25.3 =(6.3+19)
1.23
3.00 + = H1
x400
400
25
x10
400
45
0 x8
40
95
11
0x
40
Spring
supports
at pile
locations
Continuity for
moment assumed
at continuous ends
of old raft
Lateral supports at
continuous ends
considered for new slab
RAFT PLAN
Fixed links
assumed to
transfer shear
between new and
old slab
E value of existing
raft slab
considered to be
half of that of new
concrete.
RAFT PLAN
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00,
-0.72 -0.72
-0.72
0.00, -0.72
0.00,
-0.72 -0.72
ROOFING AND
0.00,0.00,0.00,
0.00, 0.00,0.00,
0.00,
0.00,
-0.72
0.00, 0.00,
-0.72 0.00,
-0.72
0.00,
0.00,
0.00,
0.00,-0.720.00,
0.00,
-0.72
0.00,0.00,
0.00,
-0.72
-0.72
0.00,
0.00,
0.00,0.00,
-0.72
0.00, 0.00,
-0.72
0.00,
-2.400.00,
-0.72
-2.40 -0.72
0.00, -0.72
0.00,
-0.72 -0.72-0.72
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,0.00,
0.00,0.00,
0.00,
0.00,0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
-0.72-0.72
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
-0.72
0.00,
-0.72
0.00, 0.00,
0.00,
-0.72
-2.40
0.00,
0.00,
-2.40
0.00,
0.00,
-0.72
0.00,
0.00,
0.00,
-2.40
0.00,
-0.72
0.00,
0.00,
0.00,
-0.72
0.00,
-0.72
0.00, 0.00,
0.00,
0.00,
-0.72
0.00,
-0.72
0.00, 0.00,
-0.72
0.00,
0.00,
0.00,
-0.72
0.00,
0.00,
-0.72
0.00,
-2.40
0.00,
-0.72
-2.40 -0.72
0.00,
0.00,
0.00,
-0.72
0.00,
0.00,
0.00,
0.00,
0.00,
-0.72
-2.40
-0.72
0.00,
0.00,
-0.72
0.00,
-0.72
0.00,
0.00,
0.00,
-0.72
0.00,
-0.72
0.00,
-0.72
0.00,
0.00,
-0.72
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-0.72
-2.40
0.00,
0.00,
-0.72
0.00,
-0.72
0.00,
0.00,
-0.72
0.00,
0.00,
0.00,
0.00,
-0.72
0.00,
0.00,
-0.72
-2.40
0.00,
0.00,
-0.72
-0.72
0.00,
0.00,
-0.72
-2.40
0.00,
-0.72
0.00,
-0.72
0.00,
0.00,
0.00,
-0.72
0.00,
0.00,
-0.72
-2.40
-0.72
0.00,
0.00,
-0.72
0.00,
-0.72
0.00,
-0.72
-2.40
-0.72
0.00,
-0.72
0.00,
-0.72
-0.72
-2.40
-0.72
-0.72
-2.40
-0.72 WATER PROOFING
0.00,
0.00,0.00,
0.00, 0.00,
0.00, 0.00,
-2.40
-2.40 0.00,
0.00, 0.00,
0.00,
-2.40 0.00,
0.00,0.00,
0.00,
-0.72
0.00, -0.72
0.00, 0.00,
0.00,
-0.72
-0.72 -0.72
0.00, -0.72
0.00, -0.72 -0.72
0.00, 0.00,
0.00, 0.00, 0.00,
0.00,-2.40 -2.40
-2.40
0.00,
0.00,0.00,
0.00, 0.00,
0.00,
-2.40 -0.72
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00, -2.40
-2.40
0.00,
0.00,
-2.40
0.00,
-2.40
0.00,
-2.40
0.00, 0.00,
-2.40
0.00,
0.00,
-2.40-2.40
0.00,
-2.40 0.00,
0.00,
-0.72
0.00,0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
-2.40
0.00,
-2.40
0.00,
0.00,
-2.40
-2.40
0.00, -2.40
0.00,
0.00,
-2.40
-2.40
-2.40
-2.40
-2.40 LOAD - 0.72 kPa
0.00,
0.00,0.00,
0.00,-2.40
-2.40 0.00, 0.00,
0.00, 0.00,0.00,
0.00, -2.40
-2.40
0.00, -2.40
-2.40 0.00, 0.00, 0.00, 0.00,-2.40 -2.40
0.00,
0.00,0.00,
0.00,0.00, -2.40
0.00,
0.00,
0.00, 0.00,
-2.40 0.00,
-2.40
0.00, 0.00,
-2.400.00,
-2.40 -2.40
0.00, 0.00,0.00, -2.40-2.40
0.00, 0.00, 0.00,
0.00, 0.00, 0.00,
-2.40 -2.40 -2.40
0.00,
0.00, 0.00, 0.00,
-2.40 -2.40 0.00,
0.00, 0.00,
0.00,
0.00, 0.00, -2.40
0.00,
0.00, -2.40 -2.40
-2.40
0.00,
0.00, 0.00,
0.00, -2.40-2.40 0.00, 0.00, 0.00, 0.00,
0.00, -2.40
0.00, -2.40
0.00,0.00, -2.40-2.40
0.00,
0.00,0.00,
0.00,0.00,-2.40
0.00, -2.40
-2.40 0.00,
0.00, 0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
-2.40
0.00,-2.40
-2.40
0.00, -2.40
-2.40 -2.40
-2.40 0.00, 0.00, 0.00, 0.00, -2.40-2.40
0.00,
0.00,0.00,
0.00,0.00,
0.00, -2.40
0.00, 0.00,
-2.40 -2.40-2.40
0.00,
0.00, 0.00,
0.00, -2.40
0.00, 0.00,
-2.40 0.00,
0.00, 0.00, 0.00,
-2.40 -2.40
-2.40
0.00,
0.00, 0.00,
0.00,0.00, 0.00,
-2.40-2.40 -2.40 0.00, 0.00,
0.00, 0.00,0.00, -2.40
0.00, -2.40
-2.40
0.00,
0.00, 0.00,
0.00, -2.40
-2.40 0.00,0.00, 0.00,
0.00,0.00,0.00,
-2.400.00,
-2.40 0.00,
0.00,0.00,
-2.40
0.00, -2.40
0.00, 0.00, -2.40
0.00, -2.40-2.40
0.00,
0.00,0.00,
0.00, -2.40
0.00,
-2.40 0.00,
0.00, 0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,0.00,
-2.40
-2.40
0.00, -2.40
0.00, -2.40
-2.40-2.40 0.00,
0.00, 0.00,
0.00, -2.40
-2.40
0.00,0.00,
0.00, 0.00,
0.00, 0.00,
0.00, 0.00,
-2.40 -2.40
-2.40 -2.40 0.00, 0.00, 0.00,0.00,
0.00,-2.40
0.00,
-2.40
0.00, 0.00, -2.40 -2.40
0.00,
0.00, 0.00,
0.00, -2.40-2.40 0.00,
0.00,
0.00, 0.00,
0.00,
0.00, -2.40
-2.40
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
-2.40-2.40 0.00, 0.00,
0.00, 0.00,
0.00,
0.00, -2.40
0.00, 0.00,
-2.400.00,0.00,
-2.40 -2.40
0.00,
0.00, 0.00, -2.40
0.00, -2.40 -2.40
0.00,
0.00,0.00,
0.00, -2.40 0.00,
-2.40 0.00,0.00,
0.00, 0.00,
0.00, 0.00,
-2.40
0.00, 0.00,
0.00,-2.40 -2.40
0.00, -2.40
0.00, -2.40
0.00, 0.00,
-2.40 0.00,0.00, -2.40-2.40
0.00, 0.00, -2.400.00, 0.00, 0.00,0.00,
0.00,
-2.40 0.00,
0.00, 0.00,
0.00, -2.40
0.00, -2.40
-2.40 -2.40
0.00, 0.00,
0.00, 0.00,
0.00,
-2.40 0.00, 0.00,
-2.40 0.00, -2.40 -2.40
0.00, 0.00,
0.00,
0.00,
0.00, 0.00,
0.00,0.00,-2.40 -2.40
-2.40-2.40 0.00,
0.00, 0.00,
0.00, -2.40
-2.40
0.00,0.00,0.00, 0.00, -2.40
0.00,
0.00,-2.40
0.00,
-2.40
0.00,
0.00, 0.00,
0.00,
-2.40
0.00,
0.00, 0.00,
-2.40
0.00, -2.40-2.40 -2.40
0.00,
0.00, 0.00, 0.00,
0.00,
0.00, -2.400.00,
-2.40
0.00, 0.00,
0.00, 0.00,
-2.40 -2.40
0.00, -2.40-2.40
0.00,
0.00, 0.00,
0.00, -2.40
-2.40 0.00, 0.00, -2.40
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
-2.40
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
-2.400.00,
-2.40
-2.40
0.00,0.00,
0.00,
0.00,
0.00,
-2.40
-2.40
0.00, 0.00, 0.00,
-2.40
-2.40
0.00, -2.40
-2.40 -2.40
-2.40
-2.40 WALL CLADDING
0.00, 0.00,
0.00,0.00, 0.00,
0.00, -2.40 -2.40
0.00,
-2.40
0.00, 0.00,
0.00, -2.40
-2.40
0.00,
0.00,0.00,
0.00,0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00, 0.00,
-2.40
0.00,
-2.40
-2.40
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
-2.40
0.00,
0.00,
0.00,
-2.40
-2.40
0.00,
-2.40
-2.40
0.00, -2.40
-2.40
0.00,
-2.40
-2.40 -2.40
LOADS - 2.4 kPa
0.00,0.00,0.00, 0.00,
-2.40
0.00,0.00, 0.00,
-2.40
0.00, -2.40
0.00, 0.00,
-2.40 -2.40
0.00, 0.00,
0.00,0.00,
0.00, 0.00,
0.00,0.00,
-2.40-2.40
-2.40
0.00,
-2.40 0.00, 0.00,
0.00, 0.00, -2.40
-2.40 -2.40
0.00,
0.00, 0.00,
0.00,0.00, 0.00,
-2.40
0.00,0.00,
-2.40 0.00,
-2.400.00, -2.40-2.40
0.00,
0.00,0.00,
0.00, 0.00,
0.00, -2.40
0.00,
0.00, 0.00,
-2.40
0.00, 0.00,
-2.40 -2.40
0.00, -2.40
0.00, 0.00,
-2.40 -2.40
0.00,
0.00,0.00, 0.00,0.00, -2.40
-2.40
0.00, 0.00,
0.00, 0.00,
-2.40 0.00,
0.00, 0.00,-2.40
-2.40 -2.40
0.00,
0.00,0.00, -2.40
0.00, 0.00,0.00, 0.00,
0.00,
-2.40
0.00,0.00,
-2.400.00, -2.40-2.40
Masonry wall loads 0.00,0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,-2.40
-2.40
0.00,
-2.40
0.00, 0.00,
-2.40
0.00,
-2.40
0.00, 0.00,
0.00,
0.00,
-2.40
0.00,
-2.40
0.00,
-2.40
-2.40
0.00,
0.00,
0.00,
-2.40 0.00,
0.00,
-2.40
0.00,-2.40
-2.40
-2.40
-2.40
-2.40
0.00, 0.00,
0.00,0.00,
0.00,
-2.40
0.00, 0.00,
0.00, 0.00,-2.40
-2.40
-2.40 0.00, -2.40
on wall supporting 0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
-2.40
0.00, 0.00,
0.00,
-2.40
0.00,
-2.40
-2.40
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
-2.40
0.00,
-2.40
0.00,
-2.40
-2.40 -2.40
-2.40
-2.40
-2.40
0.00, -2.40
0.00,0.00,
0.00, 0.00,
0.00,
-2.40 0.00,
-2.40
0.00,-2.40
0.00, -2.40
0.00, 0.00, 0.00,
0.00,
-2.40 0.00,0.00,
-2.40-2.40
beams - 31.5 kN/m 0.00,
0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
-2.40
0.00, 0.00,
0.00,
-2.40
0.00,
-2.40 0.00,
0.00,
-2.40
0.00,
-2.40
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
-2.40
0.00,
-2.40
-2.40
0.00,
-2.40
-2.40
-2.40
0.00,
0.00,
-2.40
-2.40
-2.40
0.00,0.00,
0.00, -2.40
0.00,
0.00, 0.00,
0.00,0.00,
-2.40
-2.40
0.00, 0.00,
0.00,
0.00, -2.40
-2.40
-2.40
0.00,
0.00, 0.00,
0.00, 0.00,
0.00,
0.00,0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
-2.40
0.00,
0.00,
-2.40
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
-2.40 0.00,
-2.40
0.00,
-2.40
0.00,
-2.40
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
-2.40
-2.40
0.00,
0.00,
-2.40
0.00,
-2.40
0.00,
-2.40
-2.40
-2.40
-2.40
-2.40
Refer page nos. 11, 13, 19
0.00, 0.00,
0.00, 0.00, -2.40
0.00,
0.00,-2.40 -2.40 0.00,
0.00,
0.00,-2.40
0.00, 0.00, 0.00,
-2.40
-2.40 -2.40
0.00,
0.00,0.00,
0.00, -2.40
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,-2.40
-2.40
0.00, 0.00, -2.40
0.00, -2.40
0.00,
0.00, -2.40
-2.40
0.00,
0.00,0.00, -2.40
0.00,
0.00, -2.40
0.00,
0.00, 0.00,
-2.40 -2.40
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00, 0.00,-2.40
-2.40
0.00,
0.00,
-2.40 0.00,
-2.40 0.00,
0.00, 0.00,
-2.40
-2.40 -2.40
0.00, 0.00,
0.00, -2.40
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
-2.40
-2.40
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
-2.40
-2.40
-2.40
0.00, 0.00,0.00,
0.00,
0.00, 0.00, 0.00,
-2.40
-2.40 -2.400.00,
0.00,
0.00, -2.40 -2.40
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
-2.40-2.40
0.00, 0.00,
-2.40
0.00,
0.00, 0.00,
0.00, -2.40
-2.400.00,
-2.40 -2.40
0.00, 0.00,
0.00, 0.00,
-2.40
0.00,
0.00, 0.00,
-2.40
0.00, -2.40
0.00,-2.40
0.00, 0.00,
0.00, -2.40
-2.40
0.00,
0.00, 0.00,
0.00,
0.00,0.00, 0.00,
-2.40
0.00,
-2.40 -2.40
0.00,
0.00,-2.40
0.00, -2.40
0.00, -2.40
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
-2.40 -2.40
0.00, -2.40
0.00,
0.00, -2.40-2.40 -2.40
0.00,0.00,
0.00, 0.00,
0.00, 0.00,
-2.40
-2.40 0.00, 0.00,
-2.40 0.00,0.00,
-2.40
0.00,0.00,0.00,
0.00, 0.00,
-2.40
0.00,
0.00,
0.00,
0.00, -2.40
0.00,
0.00,
0.00,
0.00,
-2.40 -2.40
-2.40-2.40
0.00,
-2.40
0.00,0.00,
0.00,
0.00, 0.00,
0.00,
-2.40
0.00, -2.40
-2.40
0.00,
0.00, 0.00,
-2.40 -2.40
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
-2.40
-2.40
0.00,
0.00,
0.00,
0.00,
0.00, -2.40
0.00,
-2.40 0.00,
0.00, -2.40-2.40
-2.40
0.00,
0.00,0.00,
0.00, -2.40
0.00,
-2.40 0.00,
0.00,
0.00, -2.40
0.00,
0.00,
0.00, -2.40
-2.40
0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
-2.40
0.00,
-2.40
-2.40
-2.40
0.00,
0.00, 0.00,
-2.40
0.00, -2.40 -2.40
-2.40
0.00, -2.40
0.00, 0.00,
0.00,
0.00, -2.40
0.00,
0.00,
0.00, 0.00, 0.00,
-2.40
-2.40 0.00, -2.40
-2.40
0.00,
0.00,0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
-2.400.00,
0.00,
0.00,
0.00, 0.00,
0.00,
-2.40
-2.40
0.00,
-2.40 -2.40
0.00,0.00,
0.00,
-2.40 -2.40-2.40
0.00, 0.00,
0.00,
0.00, 0.00,0.00,
0.00,
-2.40 0.00, -2.40
0.00,
-2.40
-2.40 -2.40
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00, -2.40
0.00,
-2.40-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40 -2.40
0.00,
0.00,
0.00, -2.40
-2.40 -2.40
0.00, 0.00,
0.00, 0.00,
0.00, 0.00,
-2.40
0.00, 0.00,
0.00,
-2.40
-2.40
0.00, 0.00, 0.00,
-2.40-2.40
-2.40
0.00,
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
-2.40 -2.40
-2.40 0.00,
0.00,
0.00, 0.00,
-2.40 0.00,
-2.40
0.00, -2.40-2.40
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
-2.40
0.00,
-2.40
0.00, 0.00,
-2.40
0.00,-2.40
0.00,0.00,
0.00,
0.00,
0.00,
0.00, -2.40
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
-2.40
0.00,
-2.40
0.00,
0.00,
-2.40
-2.40-2.40
-2.40
0.00, -2.40
0.00,
0.00,0.00,
0.00, 0.00,
-2.40
0.00, -2.40
0.00,
0.00, 0.00,
0.00,
-2.40
0.00, -2.40
0.00,
0.00,
-2.40 -2.40
-2.40
0.00,0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40 0.00,
-2.40
0.00,
0.00,
0.00, -2.40
0.00,
-2.40
0.00, 0.00,
-2.40
-2.40 -2.40
0.00,0.00,
0.00,0.00, 0.00,
0.00,
-2.40
0.00, -2.40
-2.40
0.00,
0.00,
0.00, 0.00,
-2.40
0.00,0.00,
-2.40 -2.40-2.40
0.00,0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
-2.40 -2.40
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
-2.40 0.00,
-2.40
0.00, 0.00,-2.40
-2.40
-2.40 -2.40
0.00,
0.00,0.00,
0.00,
0.00, -2.40
0.00,0.00,
0.00,
-2.40
0.00,
0.00,
-2.40
0.00,
-2.40
0.00, -2.40
0.00,
-2.40 -2.40
0.00,0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
-2.40
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
-2.40
-2.40
0.00,
-2.40
0.00,
-2.40 -2.40
0.00, 0.00,
0.00,0.00, 0.00, -2.40
0.00,-2.40
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,0.00,
-2.40
0.00,
0.00,
-2.40 0.00,-2.40
-2.40
-2.40
0.00, 0.00, -2.40
-2.40 -2.40
0.00, 0.00,
0.00, 0.00,
-2.40 -2.40
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
-2.40
0.00,
-2.40
0.00,
0.00, -2.400.00,
0.00, -2.40
0.00,
0.00, 0.00,0.00,
-2.40
0.00, 0.00,0.00,
0.00,-2.40
0.00, -2.40-2.40
-2.40
0.00, 0.00,
0.00,0.00,
0.00, 0.00,
-2.40
0.00, -2.40
0.00,
0.00, 0.00,
-2.40 -2.40 -2.40
0.00,0.00,
0.00, 0.00,
-2.40
0.00, -2.40
0.00,
0.00, 0.00,
-2.40-2.40
0.00,0.00,
0.00,0.00,
-2.40
0.00, 0.00,
-2.40 -2.40
0.00,
0.00,0.00,
0.00,0.00,
0.00, 0.00,
-2.40 0.00,
-2.40 -2.400.00,
0.00, -2.40 -2.40
0.00,0.00, 0.00,
0.00, 0.00,
-2.40
0.00, 0.00,
-2.400.00,
0.00, -2.40-2.40
-2.40 0.00,
0.00,0.00,
0.00, 0.00,
0.00, 0.00,
-2.40 -2.40
0.00, 0.00,
-2.400.00,
0.00, -2.40 -2.40
0.00,0.00,
0.00,0.00,
0.00,
-2.400.00,
0.00,
-2.400.00,
0.00,
-2.40 0.00,
-2.40 -2.40
0.00,0.00,
0.00,0.00,
0.00, 0.00,
-2.40 0.00,
-2.40 0.00,
0.00, -2.40-2.40
-2.400.00,
0.00,0.00,
0.00,0.00,
0.00,
-2.40 0.00,
0.00,
-2.40 0.00,
-2.40
0.00, 0.00,
-2.40-2.40
0.00,0.00,
0.00,0.00,
0.00, 0.00,
-2.40 0.00,
-2.40 0.00,
0.00, -2.40 -2.40
-2.400.00,
0.00,0.00,
0.00,0.00,
0.00,0.00,
-2.40 0.00,
-2.400.00,
0.00,
-2.40 0.00,
-2.40-2.40
0.00, 0.00,
0.00,
0.00, 0.00, -2.40 0.00,
0.00,-2.40 -2.40
0.00,
0.00, -2.40
0.00, -2.40
0.00, 0.00,
0.00, 0.00,
-2.40-2.40
0.00,0.00,
0.00,
0.00,0.00,
0.00,
0.00,
0.00,0.00,
0.00,
-2.40
0.00,0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
-2.40
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
-2.40
-2.400.00,
0.00,
0.00,
0.00,
-2.400.00,
0.00,
-2.40
0.00,
0.00,
-2.40 -2.40
-2.40-2.40
-2.400.00,
0.00, -2.40 -2.40
FILLING LOAD ON
0.00,0.00,
0.00, 0.00,
-2.40 -2.40
0.00, 0.00,
0.00, 0.00, -2.40-2.40
0.00,0.00,
0.00,
0.00,0.00,
0.00,
0.00,
0.00,0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
-2.40
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
-2.40
-2.40
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40 0.00,
0.00,
0.00,
-2.40 -2.40
-2.400.00,
-2.40-2.40
-2.40 -2.40 -2.40
0.00,
BASE SLAB - 74.5 kPa
0.00,0.00,
0.00,0.00,
-2.40-2.40
0.00, 0.00,
0.00, 0.00,
-2.40-2.40
0.00,0.00,
0.00,0.00,
-2.40
0.00, 0.00,
-2.40 -2.40
0.00, 0.00,
0.00,0.00,
0.00,0.00,
-2.40 0.00,
-2.40 0.00,
0.00,
-2.40 -2.40 -2.40
0.00,
0.00, 0.00,
0.00, -2.40
0.00,
0.00, 0.00,
-2.40
0.00, 0.00,
0.00,
-2.40 0.00,
-2.40-2.40
0.00,0.00,
0.00,0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
-2.40
-2.40
0.00,
-2.40 0.00,
-2.400.00,
0.00, -2.40-2.40
0.00,
0.00, -2.40
0.00,
0.00, 0.00,
0.00,
-2.40 0.00,
-2.40-2.40
0.00,0.00,
0.00, -2.40
0.00,
0.00, 0.00,
-2.40
0.00, -2.400.00,
0.00, -2.40 -2.40
0.00,0.00,
0.00, 0.00,
-2.40
0.00, 0.00,
-2.40
0.00, -2.40-2.40
0.00,0.00,
0.00, 0.00,
-2.40
0.00, 0.00,
-2.40
0.00,0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
-2.40
0.00, -2.40
0.00,
0.00, -2.40
0.00, -2.40
0.00,0.00,0.00, -2.40
0.00, -2.40 -2.40
0.00,0.00, 0.00,
0.00,0.00, 0.00,
-2.40-2.40
0.00,0.00, 0.00, 0.00,
-2.40 -2.40
0.00, 0.00, -2.40
0.00, 0.00, -2.40
Refer page 10
25.30
31.61
25.30
31.61 25.30
25.30
31.61 25.30
SOIL LOAD ON
35.5731.61
31.61
35.5731.61 25.30
40.85
35.57
35.57
31.61 25.30
35.57 31.61
31.61
35.5731.61 25.30
31.61 25.30
BASEMENT
40.85 35.57 31.61 25.30
31.61
35.57
46.13
40.8535.57
40.8535.57
40.85
46.13 40.85
31.61
35.57
35.57
40.8535.57
40.8535.57
46.1340.85
31.61 25.30
31.61
31.61
31.61
35.57
25.30
31.61 25.30
31.61
WALLS - EAST
46.1340.85 35.57
40.8535.57 31.61
31.61 25.30
51.40
56.68
46.13
51.40 46.1340.85 35.57
46.13
46.13
51.4046.13
51.4046.13
51.40
40.85
40.8540.85
46.1340.85
35.5731.61 25.30
35.57
40.8535.57
31.61
35.5731.61
31.61 25.30
35.57 31.61 25.30
AND SOUTH
56.68 51.40 46.1340.85
51.4046.13 35.57
35.57 31.61
31.61
62.8256.68
56.68
51.4046.13
56.6851.40
56.6851.40
62.82 56.6851.40
51.4046.13
51.4046.13
40.85
40.8535.57
46.1340.85
46.13 40.85
31.61 25.30
35.5731.61
40.8535.57 31.6125.30
31.61
35.57
40.8535.5731.61
46.1340.85 35.57 31.61 25.30
WALLS
56.68
56.68 51.40 46.13 40.85 35.57 31.6125.30
31.61
65.79 62.82 56.68 51.40 46.13
51.40 46.13 40.8535.57 31.61
65.7962.82
62.82 56.68
62.82
51.40 46.1340.85 35.57
40.85 25.30
35.57
70.3565.79 62.82
65.79
56.6851.40
56.68
56.68
46.1340.85
51.4046.13 35.5731.61
25.30
40.8535.57
70.3565.79 62.82
62.82
65.79 62.82 56.68
51.4046.13
56.6851.40
56.6851.40 46.13 40.85
25.30
40.85
46.13
35.5731.61
31.61
31.61
70.35 65.7962.82 56.68 51.4046.13
65.79 25.30
40.85 31.61
40.85
31.61 35.57
74.90 65.79
70.35
74.9070.35 65.79 62.82 56.6851.40
62.82
62.82
51.4046.13
46.13 31.61
40.85
40.85
31.61 35.57
35.57
70.35
70.35 65.7962.82
56.68
56.68 51.4025.30 46.13
31.61
51.4046.13 40.85 35.57
74.90
0.0074.90 70.35
70.35
65.79
65.79 56.68 25.30
62.82 56.6851.40
62.82 31.61
31.61
51.4046.13 35.57
35.57
35.57
40.85
74.90 70.35 65.7962.82 56.68 56.68 51.4031.6146.13
35.57
74.90 70.35
0.00 0.00
65.79
65.7962.82
65.79 25.30
56.68 51.40
31.61 46.13 40.85
35.5746.13
40.85
70.35
70.35
0.0070.3565.79
0.00
0.00 25.30
62.82
62.82 56.68
62.82 31.6131.61 35.57
51.40
51.40 46.13
35.5740.85
56.6851.40
70.35 65.7962.82 56.68
31.61 40.85
51.40 46.13
40.85
25.30 65.79
65.79 56.68
0.000.00 70.35
70.35
0.00
25.30 31.61
62.82
62.82
65.79 35.57
56.68
35.5756.68
62.82
40.85
51.40
40.85
51.40 46.13
0.00 70.3531.61
31.61
70.35 65.79 62.82
56.6851.4046.13
40.85 46.13
25.30
74.90
74.90
31.61
70.35
70.35
65.79 62.8256.68
65.7962.82 46.13
56.6846.13
51.40
0.00
25.30 31.61 31.61
74.90
74.90
35.57
70.35
35.57 65.7962.82 46.13
56.68
56.68 51.40
31.6174.90 65.79
70.3565.79 46.13
62.82
65.79
31.61
0.0074.90 70.35
70.3565.79 62.82
46.1356.6851.40
51.40
25.3031.61
25.30 0.0074.90
35.57 74.90 70.35 62.8262.82 51.40
51.40
56.68
31.61 35.57 70.3565.79
65.7962.82
51.4056.68
31.61 0.0074.90 70.35 65.79
70.35 51.40
74.9070.3565.79 62.82
62.82 56.68
25.3031.61 31.61 0.00
74.90
74.90 62.82
51.40 56.68
56.68
35.57 70.35 65.79
65.79
56.68
31.61
31.61 35.57 0.000.00 70.35
70.35 56.68
65.79
31.6135.57 0.00 0.00 65.7962.82
0.00 70.3556.68 62.82
31.61 35.57 0.00 56.68
70.35 62.82
62.82
31.6135.57
35.57 0.0074.90
56.68
70.35
74.90 70.35 65.79
62.82
35.57 40.85 0.00
74.90 65.79
74.9062.82
70.35
62.82
62.8265.79
35.57
35.5740.85 40.85 0.00 74.90
62.82 65.79
74.90 70.35
0.00 65.79
74.90
65.79
70.35
40.85
40.85 62.82
62.82 74.9070.35
65.79
40.85
40.85 46.13 46.13 65.79
0.00
65.79
65.79 70.35
0.00 74.90
70.35
70.35
74.90
40.85 46.13
46.13 62.8265.79
62.82 70.35 74.90
46.13 70.35
46.1351.40 65.79
65.79
65.79 70.3574.90
70.35 79.46
46.13 51.40 62.8265.79 70.3574.90
74.90
74.90
79.46
46.13 51.40
51.40 62.82 70.35 74.9079.46
51.40
51.40 56.68 65.79
65.79 70.35
70.3574.90
65.7970.35 74.9079.46
51.4056.68 56.68 62.8262.8265.79 74.90
51.40 74.90 79.46
70.3574.90
56.68
56.68 65.79
65.7970.35
65.79 70.35 74.9079.46
56.68 62.8265.79
62.82 70.35 74.90
56.68 62.82
65.79 74.90 79.46
70.3574.90
56.6862.82 65.79
65.79 70.35 74.9079.46
70.35
62.82
62.82 65.79 70.35 74.90
62.82
65.79 79.46
74.9079.46
70.3574.90
62.82 65.79
65.7970.35 74.90
70.3574.90
62.82 65.79 70.35
65.79
65.79 70.35 74.90 79.46
70.35
70.35 74.9079.46
74.90
70.3574.90
70.35
70.3574.9079.46
74.90 79.46
74.90
74.90
74.90 79.46
74.90
79.46
79.46
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
-1.40
0.00, -1.40
0.00,
-1.40 -1.40
0.00,
-1.40 -1.40
Snow load on roof
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
0.00,0.00,
-1.40
0.00,
-1.40
0.00, -1.40
0.00,
0.00,0.00,
0.00,
-1.40 0.00,
0.00,
-1.40
0.00,0.00,
-1.40
0.00,0.00,
-1.40
0.00,
0.00,
0.00,
-1.40-1.400.00,
0.00, -1.40
-1.40
0.00,
-1.40 0.00,-1.40
-1.40 -1.40
0.00,
0.00,0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,0.00,
0.00,
-1.40
0.00,
-1.400.00,
0.00,
0.00,0.00,
0.00,
0.00,
0.00,
0.00,-1.40
0.00,
0.00,
-1.40
0.00,
-1.40
-1.40 0.00,
0.00,
0.00,
0.00,
0.00,0.00,
0.00,
0.00,
-1.40
-1.40
0.00,
0.00,-1.40
0.00,
-1.40
0.00,
-1.40
0.00,
-1.40
0.00,
0.00,
0.00,
-1.40
0.00,
0.00,
-1.40
-1.40
0.00,
-1.40
0.00,
0.00,
-1.40
0.00,
-1.40
0.00,
0.00,
-1.40
0.00,
-1.40
0.00,
0.00,
-1.40
0.00,
0.00,
-1.40
-1.40
0.00,
-1.40
-1.40
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
-1.40
0.00,
-1.40
0.00,
-1.40
0.00,
0.00,
-1.40
0.00,
0.00,
-1.40
0.00,
-1.40
0.00,
0.00,
0.00,
0.00,
-1.40
-1.40
0.00,
-1.40
0.00,
0.00,
0.00, -1.40
-1.40
-1.40
-1.400.00,
-1.40
-1.40
0.00,
0.00,-1.40 -1.40
-1.40
0.00,
-1.40
0.00,
-1.40
0.00,
-1.40
-1.40
-1.40
-1.40
- 1.4 kPa
0.00,0.00,
0.00,
0.00, 0.00,
0.00,-1.40
0.00,
0.00, 0.00,
0.00,-1.40
0.00,
-1.40
0.00,
0.00, -1.40
-1.40
0.00,
-1.40 0.00,
0.00, -1.40
-1.40
-1.40
0.00, 0.00, -1.40
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
1.50
0.00, 1.50
0.00,
1.50 1.50
0.00,
1.50 1.50
0.00,0.00,0.00,
0.00,
0.00,0.00,
0.00,0.00,
0.00,
0.00,
1.50 1.50
0.00,
0.00, 1.50
0.00,
0.00,
0.00,
1.50
0.00,
0.85, 0.00,
0.00,
1.500.00,
0.00,1.50
0.00,
0.00,
0.00,
1.50
1.11, 0.00,
0.00,
1.50 1.50
0.00,
0.00 0.00,
1.50
0.00 0.00,
1.50 1.50
0.00,
1.50 1.501.50
0.00,
0.00, 0.00,
0.00, 0.00,
0.00,
0.00,1.501.50
0.00,
0.00,
0.00,0.00,0.00,
0.00,
1.501.500.00,
0.00,
0.00,0.00,
1.50
0.00,
1.50
1.11,
0.00,
1.50
1.11, 0.00,
1.11,
1.50
0.85,
0.00,
1.50
0.00,
0.00
0.00,
1.50
0.00 0.00,
0.00,
1.50
0.00
0.85,0.00,
0.00,
1.50
0.85, 1.50
0.00,
0.00,0.00,
0.00,0.00,
1.50
0.00
0.00,0.00,
0.00,
1.50
0.00,0.00,
1.50
0.000.00,
1.50
0.00,
0.00,
1.50
0.000.00,
1.501.50
0.00,
1.50 1.50 1.50
0.00,
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,0.00,
0.00,
1.11, 1.50
1.11,0.00,
0.00,
1.50
0.00 0.00,
1.50
0.00,
0.00 0.00,
1.50 1.50
0.00,
0.00,
1.50 0.00,
0.00,
1.50
0.85,
0.00, 0.00,
0.00,
1.50
0.85,0.00,
0.00,
1.50
0.00, 0.00,
1.50
0.00,0.00,
1.50
0.00,
0.00
1.50 1.50
0.00,
0.00 1.50
0.00, 1.501.50
0.00,
0.00,
1.25, 0.00,0.00,
1.11,
1.11, 0.00
0.00 0.00,
0.00,
0.00
0.00,
0.00,0.00,0.00,
0.00,
0.00,1.50
0.00,0.00,
0.00,0.00,
1.50 1.50
0.00,
0.00,0.00,
1.501.50 1.50
0.00,
1.50
0.00,0.00,
1.50
0.00, 1.50
0.85,
1.50
0.00, 1.50
0.00,
0.85, 0.00,
0.00,
0.85,
1.50 1.50
0.00, 1.50
0.00
0.00,0.00 0.00
1.25, 0.00,
1.25,
1.25,0.00,0.00
0.00, 0.00,
0.000.00,
0.00 0.00,
0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
0.00,1.50
0.00,
1.11,
0.85,
1.11,
0.85, 1.50
0.00 0.00,
1.50
0.00
0.00,
0.00, 0.00, 1.50
0.00
1.50 0.00
1.50 0.00,0.85,
0.00, 0.00,
-1.11,
-1.11, 0.00
0.00
0.00
1.25,
0.00, 0.00,
0.00,0.00,
1.11, 0.00
1.11,
1.11,
0.00 0.000.000.85,
0.85, 0.00,
0.00,
0.85, 0.00,0.00,
0.00
0.00, -1.11,
0.00 -1.11,
0.00 0.00 0.00
0.00, 0.00,
0.00, 1.11,
1.11,
1.11, 0.000.000.00 0.00,0.00, 0.00,
-1.11, 0.85,
-1.11, -1.11,
0.85,
0.000.00,
0.00
0.85,
0.00
0.00,0.00
0.00, 0.000.00
1.25, 0.00,
1.25, 0.00,0.00
0.00 1.25,
0.00,
0.00,0.00,
-1.11,
1.11,
0.85,
0.00
0.00
0.00,
0.00 0.85,
0.00 0.85,0.00,0.00,0.000.00
1.25,
1.25,0.00,
1.25,0.00,0.00
0.00,
0.00,
0.00, 0.00,
0.00 1.11,
0.00
1.11, 1.11,
0.000.000.00
0.85,
0.85,0.00,
0.00, 0.000.00
0.00,0.00,0.00,
-1.11, -1.11,
-1.11, 0.00 0.00
0.00
0.00,
0.00, 1.11,1.11,
0.000.00 0.85,
0.85, 0.00,
0.00,
0.85, 0.00, 0.00
-1.11,
0.00, 0.00
0.00 0.00
0.00,
0.00, 1.11,
1.11, 0.000.00 0.00, 0.00,-1.11,-1.11,
0.85, 0.00
0.85, 0.00
0.00,
0.00, 0.000.00
1.25, 0.00,
1.25, 0.00,0.00
0.00 1.25,
0.00, 0.00,
0.00,
0.00,
0.85,
1.11,
1.11, -1.11,
-1.11,
0.00, 0.00
0.00,
0.00
0.85, 0.00
0.00, 0.00
0.00 0.00
0.00 0.85,0.85,0.00,0.00,0.000.00
1.25, 0.00, 0.00
0.00, 1.11, 0.00 0.00, -1.11, 0.00
1.25, 0.00, 0.00 0.000.00 0.85, 0.00, 0.00 0.00, -1.11, 0.00
0.00,
0.00,
1.25,
1.25,
0.00,
1.25,
1.25,
0.00,
0.00,
1.11,
1.11,
0.00,
0.00
0.00,
0.00,
0.00,
1.11,
0.00
0.00
0.00
1.11,
1.11,
0.00
0.00
0.00,
0.00
0.00,
0.00,
1.25,
0.00,
1.11,0.00,
1.11,
1.11,
0.85,
0.00,
1.11,
0.00,
0.85,
0.00,
0.00,
0.85,
-1.11,
0.00
0.85,
0.00,
0.00
-1.11,
0.00 0.00,
0.00
0.85,
0.00,
0.00,
0.85,
-1.11,
0.00
0.00
0.00,
0.00,
0.00,
0.00
0.000.00
0.00
0.00,
-1.11,
0.85,
0.85,0.85,
-1.11,
0.00
-1.11,
0.00,
0.00
0.00
0.00
0.00,
0.85,
0.00,
0.00
0.00
0.00,
0.00
0.000.00
0.00,
-1.11, 0.00
0.00
Wind ward side - 1.25 kPa
1.25,
1.25,0.00,
0.00, 0.00
1.11,
0.00, 0.000.00 0.85,
0.00 0.85,0.00,0.00,
0.00,0.00
0.00,
0.00 -1.11,
-1.11, 0.000.00
0.00,
1.25,
1.25,
0.00,
0.00,
1.11,
0.00,
1.25,0.00,
1.25,
1.11,
1.11,
0.00
0.00
0.00,
0.00
0.00
0.00,
0.00
0.00 1.25,
0.00
0.85,
0.85,
0.00,
0.00,0.85,
0.00, -1.11,
0.00,
0.00,
0.00, 0.00,
-1.11,
0.00
0.85,
0.85,
0.00,
0.00
0.00,
0.85,
0.85,
-1.11,
0.00
0.00 0.00
0.00,
0.00,
-1.11,-1.11,
0.85,
0.00
0.00,
0.00,
0.00
0.85,
0.00
0.00
0.00
0.00,
0.85,
0.00,
0.00,
0.00
0.00
0.00
0.00, 0.00
0.00,0.00
-1.11,
-1.11,
0.00
0.000.00
Leeward side - 0.85 kPa
1.25, 0.00, 0.00 0.85, 0.00, 0.85,
0.85,
0.00,
0.00 0.00,
0.00, 0.00,
-1.11, 0.00
-1.11, 0.00
0.00 0.00
1.25,
0.00,
0.85,
0.00,0.00,
0.00,
0.85,
0.85,
-1.11,
0.00,
0.00,
0.85,
0.00,
0.85,
0.00,
-1.11,
0.85,
0.00 0.00
0.00
-1.11,
0.00,
0.85,
0.00
0.00,
0.85,
-1.11,
0.00
0.00
0.00,
0.00,
0.85,
0.00
0.85,
0.00
0.00
0.85,
0.00,
0.00
0.00
0.00,
0.00,
0.00,
0.00,
0.85,
0.00,
0.00
-1.11,
0.00
-1.11,
0.00,0.00
0.00
0.00,
-1.11,
0.00
0.00
0.00
0.00
0.00 Other two sides - 1.1 kPa
0.85, 0.00,
0.00,
0.00, -1.11,
0.00
-1.11, 0.85,0.00 0.00
0.00, 0.00
0.00,
0.85,
0.00, 0.85,
0.85,
0.00,-1.11,
0.00,
-1.11,
0.85,0.00,
0.85,
0.00,
0.00,
-1.11,
0.85,
0.85,
0.00
0.00
0.00,
0.00,
0.85,
0.00,
0.00
0.85,
0.00,
0.00
0.00,
0.00
0.00
0.00,
0.85,
0.00
-1.11,
0.00,
0.85,
0.00
0.00,
0.00,
0.00,0.00
-1.11,
-1.11,
0.85,
0.00
0.00,
0.00
0.85,
0.00
0.00
0.00
0.00,
0.00,
-1.11,
-1.11, 0.00
0.00
0.00
0.00
0.00,
0.00
0.00
0.00
Roof - uplift of 1.5 kPa
0.85,
0.00,0.00,
0.00,
-1.11,-1.11,
0.85,
0.00 0.00
0.85, 0.00
0.00, 0.00,
0.00,
0.00,0.00 -1.11,
-1.11,
0.00 0.00
0.00
0.00, 0.85,
-1.11,
0.85,0.00,
0.00, 0.00
0.00 0.00,
0.85,
0.00 -1.11,
0.00, 0.00
0.00
0.85, 0.00,
0.85,0.00,
0.00, 0.85,
-1.11,
0.00 0.00,
0.85,
0.00 0.00 0.00
0.00, 0.00
0.85,0.00, 0.00,
0.00, 0.85,
0.00
-1.11,-1.11,
0.00,
0.00 0.00
0.00
0.00, -1.11, 0.00
0.85,
0.00, 0.00,
-1.11, 0.85,
0.00
0.00 0.00,
0.00, 0.00
-1.11, 0.00
0.85,
0.00, -1.11, 0.85,0.00,
0.00 0.00,
0.00,
0.00, 0.85,
0.00 -1.11,
0.00,
0.85,
0.00
-1.11, 0.00,
0.00 0.00
0.00
0.00
0.85, 0.00, 0.85,
0.00,
0.00
0.85,0.00,
-1.11, 0.00
0.00, 0.85,
0.00
0.00 0.00, 0.00
0.85,
0.00, 0.00, 0.00
-1.11,
0.85, 0.00 0.00,
0.00,
0.00, -1.11,
0.00
-1.11, 0.00
0.00
0.85,
0.00, 0.85, 0.00,
-1.11, 0.85,
0.00
0.00
0.00,0.00,
0.00 0.00,
-1.11, 0.00
0.00
0.00,
0.85,-1.11,
0.00, 0.00
0.00,
0.85,
0.00 0.00, 0.85,
-1.11,
0.00
0.85,0.00,
0.00 0.00
0.00, 0.00
0.85, 0.00,
0.00, 0.85,
0.00
0.85, 0.00,
-1.11, 0.00,0.00
0.00
0.00, 0.00-1.11, 0.00
0.00,0.00,
0.85,
0.85,
-1.11,-1.11,
0.00,
0.00, 0.00
0.00 0.00
0.00,
0.85,
0.00
0.00, -1.11,
0.00,
-1.11, 0.00
0.000.00
0.00,
0.85,-1.11,
0.00, 0.00
0.85, 0.00,
0.00,
0.00 0.85,
0.00
-1.11,
0.85,0.00,
0.00 0.00
0.00, 0.00
0.85, 0.00,
0.00,0.85,
0.00
0.85,0.00,
-1.11, 0.00
0.00
0.00,
0.00, -1.11,
0.00 0.00
0.85,
0.00,
0.85,0.00,
-1.11,
0.00,0.000.00
0.00,
0.85,
0.00 0.00,-1.11,
0.00 0.00
0.00,
0.85,
0.00, -1.11,
0.00,
-1.11, 0.85,
0.00
0.00 0.00,
0.00
0.00, 0.85,-1.11,
0.00 0.00,
0.85, 0.00
0.00
0.00, 0.00
0.85, 0.00,
0.85,0.00,0.00,
0.85,
0.00,
0.00
0.85,
-1.11,
0.00-1.11,
0.00,
0.00,0.00
0.00
0.00, 0.00
0.00
-1.11, 0.00
0.85, 0.85,
0.00,
0.00, 0.85,0.00,
-1.11,
0.00 0.00,0.00,
0.85,
0.00
0.00
0.00,0.85,
0.00 -1.11,
0.00,
0.00,
-1.11, 0.00 0.00
0.00
0.00
0.00,
0.00,0.85, -1.11,
0.00,
-1.11, 0.00
0.85,
0.00
0.00,
0.00 0.00, 0.85,
-1.11, 0.00 0.00,
0.00 0.00
0.85, 0.00,
0.00, 0.00
0.85,
-1.11, 0.00,
0.00,
0.00 0.00
-1.11, 0.00
0.85,
0.85,0.00,
0.00, 0.00,
0.00
-1.11,
0.85, 0.85,
0.00
0.00
0.00, 0.00,
0.00,
0.00 0.00
-1.11, 0.00
0.00,
0.85, -1.11,
0.00,0.85,0.00,
0.00
0.00 0.85,
0.00, 0.00,0.00
-1.11,
0.00 0.00
0.00, 0.85,
-1.11, 0.00,
0.00,
0.00 0.00
0.85, 0.85,
-1.11,
0.00, 0.00, 0.00
0.00
0.00,
0.85, -1.11,
0.00,0.85,
0.00 0.00,
0.00
0.00, -1.11,
0.000.000.00
0.85,0.00,
0.00,
0.00,
0.85,
0.00,
0.00
0.85,
-1.11,
0.00,
-1.11,
0.85,
0.85,-1.11,
0.00,
0.85, 0.00
0.00,
0.00
0.85,0.00
0.00,
0.00,
0.00,
0.00
0.85,
0.00
0.85,
0.00
0.00,
0.00,
0.00
0.85,
-1.11,
0.00,
-1.11,
0.00
0.85,
0.00,
-1.11,
0.00,
0.00,
0.00
0.000.00
0.00,
0.00
-1.11, 0.00
0.000.00
Refer page no. 21
0.85,
0.00,
0.00, 0.00
0.85,
0.00,
-1.11,
0.00,
0.00 0.00,0.00
0.00
0.85, -1.11,
0.00, 0.00
0.00,
0.85, -1.11,
0.85,
0.00, 0.00
0.00,
0.00,
0.00
0.85,
0.00
-1.11,
0.85,
0.00, 0.00
0.00,
0.00 0.00
0.00,
0.85, -1.11,
0.85,
0.00, 0.00,0.00
0.00,
0.00 -1.11,
0.00 0.00
0.00, -1.11, 0.000.85, 0.00, 0.00 0.00
0.00, -1.11,
0.00,
0.85, 0.00, -1.11,
0.85,0.00
0.00,
0.85, 0.00
0.00
0.00,
0.85,
0.00, -1.11,
0.00,
0.00 0.00
0.00
0.00,
0.85,
-1.11,
0.85, 0.00, 0.85,
0.00,
0.00
0.00,
0.00 -1.11,
0.85,
0.00,
0.00
0.00
0.00,
0.00 0.00
0.00,
0.85,
0.00, -1.11,
0.00,
-1.11,
0.85,
0.00
0.85,
0.00
0.00,
0.00
0.00,
0.00
-1.11,
0.85,
0.00, 0.00,0.00
0.00,
0.00 -1.11,
0.00 0.00
0.85,0.00, -1.11,
0.85,
0.00, 0.00,
0.85,
0.00,
0.00
0.00, 0.00
-1.11,
0.00,
0.00
-1.11, 0.00
0.00
0.00
0.85,0.00,
0.00, 0.85,
0.00, -1.11,
0.00
-1.11, 0.00
0.00, 0.00
0.85,0.00
0.00, 0.85,
0.00,
-1.11,
0.85, 0.00,
0.00, 0.00
0.00
0.00
0.00
0.85, 0.00, 0.00,
0.00 -1.11, 0.00
0.00,0.85,
-1.11,
0.85,
0.00,
0.00, 0.00
0.00
-1.11,
0.85,
0.00,0.85,
0.00,
0.00
0.00, 0.00
0.00,
0.85, -1.11,
0.00,
0.00
-1.11,
0.85,
0.00,
0.00
0.00
0.000.00
0.00,
0.00
0.85,0.00,0.85,-1.11,
0.00, 0.00,
0.00 0.00
0.00
0.85, 0.00, 0.00 0.00
0.85,-1.11,
0.00, 0.85,
0.00,
0.85,
0.00, 0.00
0.85,
0.00,
-1.11,
0.00,
0.00 0.00,
0.00
0.00,
0.85,
0.00,
0.00
0.00
-1.11,
-1.11,
0.00,
0.00 0.00
0.00
0.00,
0.85,-1.11,
0.85,
0.00, 0.00
0.00, -1.11,
0.85,
0.00,
0.00 0.00,
0.00
0.85,
0.00,
0.00 0.00,
0.00
-1.11, 0.00 0.00
0.00,
0.85, -1.11,
0.85,
0.00, 0.00
0.00,
0.00
0.85,
0.00, 0.00,
0.00
0.00,
-1.11, 0.00 0.00
-1.11,
0.00
0.00,
0.00, -1.11,
0.85,
0.85,-1.11, 0.85,
0.00,
0.00,
0.00, 0.00
0.00
0.00
0.00
-1.11,0.85,
0.00,
0.00, 0.00,
0.00
0.00-1.11, 0.00
0.00
0.85,0.00
0.85, 0.00, 0.00, 0.00
0.00, 0.85,
-1.11, 0.00,
0.000.00
0.00,
0.85,
0.85,
-1.11,
0.85,
0.00, 0.00,
0.00
0.00,
0.85,
0.00,
0.00
0.85,
0.00,
0.00
0.00,
0.00
0.00,
-1.11, 0.00
0.00
-1.11,
0.00 0.00
0.00,
0.85,
0.00, -1.11,
0.00, 0.00
0.00,
0.85,
-1.11, 0.00
-1.11,
0.85,
0.00,
0.00
0.85,
0.00,
0.00 0.00,
-1.11,
0.00
0.00, 0.00 0.00
0.00
0.85,
0.00,0.00,
0.85,
-1.11, 0.00,
0.00
0.00, 0.85,
-1.11,
0.00
0.00
0.85, 0.00, 0.00,
0.000.00
0.00
0.00,
0.85, 0.85, 0.00,
-1.11,
0.00, 0.00,
0.85,
0.00 0.00
0.00,
0.00 0.00,
-1.11,
0.85, 0.00 -1.11,
0.00
0.00, 0.00 0.00
0.85,
0.00, 0.00,
0.85,
-1.11,0.00,
0.00
0.00,
0.00-1.11,
0.85, 0.00
0.00,0.00
0.00
0.00,0.85,
-1.11,
0.00,
0.00,0.00
0.85, 0.00
0.00,
0.00,
-1.11, 0.85, -1.11,
0.00
0.00 0.00,
0.00, 0.00
0.00 0.00
-1.11,
0.85,0.85,
0.00, 0.00,
0.85, 0.85,
0.00,
0.00 0.00
0.00, 0.00,
-1.11,
0.85,
0.00,
0.00 0.000.00
0.00,
-1.11, 0.00
0.00
0.00,
0.85, -1.11,
0.00,
0.00,
0.85, 0.00
0.85,
-1.11,
0.00
0.00, 0.00,
0.00
0.85,
0.00 0.00
0.00,
0.000.00
0.00, -1.11,
0.85,
0.85,0.00,
0.00
0.00,0.00,
0.85,
-1.11,
0.00
0.00,
0.85,
0.00
0.00,
0.00
-1.11,
0.00,
0.00,
0.00 0.00
-1.11, 0.00
0.85,0.85,
0.00,
0.00,
0.85, -1.11,
0.85,
0.00
0.00,
0.00, 0.00
0.00,
-1.11,
0.00 0.00
0.00
0.00, -1.11,
0.00,
0.85,
0.00, 0.00
0.00
0.00,
-1.11,
0.00,
0.85, 0.85,
0.00
0.00
-1.11,
0.00, 0.00,
0.000.00
0.00
0.00,
0.85,-1.11,
0.85,
0.00,
0.00, 0.00
0.00,
0.85,
0.00
0.85,-1.11,
0.00
0.00,
0.00, 0.00
0.85,
0.00 0.00
0.00, 0.00
0.85,-1.11,
0.00, 0.00,
0.00, 0.85,
0.00
0.00 -1.11,
0.00, 0.00
0.00
0.85,0.85,
0.00,
0.00,0.00,
-1.11,
0.85,
0.00 0.85,
0.00
0.00
0.00, 0.00,
0.00 0.00
0.00,
0.85,-1.11,
0.00,
0.00,
0.85, 0.00
0.85,
0.00
-1.11,
0.00, 0.00,
0.85,
0.00
0.00 0.00
0.00, 0.00
0.85, 0.00, 0.85,
0.00 0.00,
0.85,0.00
0.00,
0.00,
0.85, 0.85,0.85,
-1.11,
0.00,0.00,
0.00 0.00,
0.00
0.85, 0.85,
0.00 0.00
0.00, 0.00,
0.00 0.00 0.00
0.00,0.85,
-1.11,
0.85, 0.00
0.00,0.00, 0.85,
0.00,0.00,
0.85,0.00
0.00 0.00 0.00
0.00,0.85,
0.85,0.85, 0.00,
0.00
0.85,
0.00,
0.00
0.85,
0.00,
0.00
0.85,
0.00,
0.00 0.00,
0.00 0.00
0.85,0.85,
0.00, 0.00,
0.00
0.85, 0.00
0.85,
0.00, 0.00,
0.00 0.00
0.85,0.85,
0.00,0.85,
0.00,
0.00 0.00,
0.00 0.00
0.85,
0.85,0.85,
0.00,0.85,
0.00,
0.000.85,
0.00,
0.00
0.85, 0.00 0.00,
0.00, 0.00 0.00
0.00,0.85,
0.85,0.85, 0.00,
0.000.85,
0.00,
0.00 0.000.00,
0.00, 0.00 0.00
0.85,0.85,
0.00, 0.00,
0.85,
0.00 0.000.85,
0.85,
0.00, 0.00 0.00,
0.00, 0.00 0.00
0.85,0.85,
0.00,0.85,
0.00,
0.00 0.85,
0.00,
0.000.85,
0.000.00,
0.00, 0.00 0.00
0.85,0.85,
0.00,0.85,
0.00,0.85,
0.00 0.00, 0.00, 0.00 0.00
0.00 0.00,
0.000.85,
0.85,0.85,
0.00,0.85,
0.00,
0.00 0.00,
0.85,
0.000.85,
0.000.00,
0.00, 0.00 0.00
0.85,0.85,
0.00,0.85,
0.00,
0.000.85,
0.00, 0.00, 0.00 0.00
0.000.00,
0.000.85,
0.85,0.85, 0.85,
0.00, 0.00,
0.000.85,
0.00,
0.00 0.85,
0.000.00,
0.00, 0.00 0.00
0.85,0.85,
0.00,0.85,
0.00,
0.00 0.00,
0.85, 0.00 0.00,
0.00,
0.000.85, 0.00 0.00
0.85,0.85,
0.00,0.85,
0.00,
0.000.85,
0.00,
0.000.85,
0.000.00,
0.00, 0.00 0.00
0.85,0.85,
0.00, 0.85,
0.00,0.85,
0.00 0.00,
0.000.85,
0.000.00,
0.00, 0.00 0.00
0.85,0.85,
0.00,0.85,
0.00,
0.000.85,
0.00, 0.85,
0.00 0.000.00,
0.00, 0.00 0.00
0.85,0.85,
0.00,0.85,
0.00,
0.00 0.000.85,
0.85,
0.00, 0.00 0.00,
0.00, 0.00 0.00
0.85,0.85, 0.85,
0.00, 0.00,
0.000.85,
0.00,
0.000.85,
0.000.00,
0.00, 0.00 0.00
0.85,
0.85, 0.00, 0.85,
0.00,
0.00 0.00,
0.85,
0.00 0.85,
0.00
0.00, 0.00,
0.00 0.00
0.00,0.85,
0.85,0.85, 0.00,
0.000.85,
0.00,
0.000.85,
0.000.00,
0.00, 0.00 0.00
0.85,0.85,
0.00,0.85,
0.00,
0.00 0.85,
0.00,
0.00 0.00,
0.85, 0.00 0.00
0.00 0.00,
0.85,0.85, 0.85,
0.00, 0.00
0.00,0.85,
0.00,
0.000.85,
0.000.00,
0.00, 0.00 0.00
0.85,0.85,
0.00,0.85,
0.00
0.00, 0.000.85,
0.85,
0.00, 0.000.00,
0.00, 0.00 0.00
0.85,0.85,
0.00,0.85,
0.00
0.00, 0.85,
0.00,
0.000.85,
0.000.00,
0.00, 0.00 0.00
0.85,0.85,
0.00, 0.00
0.85,
0.00,0.85,
0.00,
0.00 0.85,
0.00 0.00,
0.00, 0.00 0.00
0.85,0.85,
0.00, 0.00
0.85,
0.00, 0.00,
0.00 0.000.00,
0.85,0.85,
0.00, 0.85,
0.00
0.00, 0.85,
0.00,
0.00
0.00 0.00
0.85,
0.85,0.85,
0.00, 0.00,
0.85,
0.00 0.00 0.00,
0.00,
0.85, 0.00 0.00
0.00,
0.85, 0.00
0.00,
0.85, 0.00 0.00
0.00,
0.85,0.85,
0.00, 0.00
0.00,
0.85, 0.00
0.00, 0.00 0.00
0.85,0.85, 0.85,
0.00,0.85,
0.00
0.00, 0.00,
0.00
0.00, 0.00
0.85,0.85,
0.00,0.00,
0.00 0.00 0.00
0.85,0.85,0.85, 0.00,
0.00,0.00,
0.00 0.00
0.85,0.85,
0.00, 0.00,
0.00 0.00
0.85, 0.00, 0.00
0.85, 0.00, 0.00
Seismic loads
Maximum factored vertical pile capacity = 700 kN (minor increase in load neglected
considering the fact that this is a temporary condition)
Maximum factored lateral pile capacity is assumed as 10% of vertical capacity =
0.1*700= 70 kN
Number: 181344
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00,0.00,
-0.720.00,
0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
-0.72 0.00,
0.00,
0.00,
0.00,-0.72
0.00,
0.00,
0.00,
-0.72 0.00,
0.00,
0.00,
0.00,0.00,
-0.72
0.00,
-0.72-0.72
0.00, -0.72
0.00,
0.00,
0.00,
-0.72
0.00,
0.00, -0.72
0.00,
-0.72
-0.72
0.00,
0.00,
0.00, 0.00,
-0.72
0.00,
-0.72-0.72
0.00,
0.00,
0.00, 0.00,-0.72
0.00,
0.00,
-0.72 0.00,
0.00, -0.72
0.00,
-0.72
0.00, -0.72
0.00,
-0.72-0.72-0.72
0.00,
-0.72-0.72-0.72
-0.72
0.00,
0.00, 0.00,0.00,
0.00,0.00,
0.00,
0.00,
0.00,0.00,-0.72
-0.72
0.00,
0.00,
0.00, 0.00,
0.00, 0.00,
-0.72
0.00,0.00,
0.00,
-0.72
0.00,
-0.72
0.00,
0.00,
0.00, -0.72
0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
-0.72
0.00,
0.00,0.00,
-0.72-0.72
0.00,
0.00,
0.00,
0.00,
0.00,
-0.72
0.00, 0.00,
-0.72
0.00,
0.00,
0.00, 0.00,
-0.72
0.00,
0.00,
0.00,0.00,
0.00,
0.00,
0.00,
-0.72
0.00,
-0.72
0.00, 0.00,
-0.72
0.00, -0.72
-0.72
0.00,
0.00,
0.00, -0.72
0.00,
0.00,
0.00,
0.00,
0.00,
-0.72
0.00, 0.00,
-2.40
0.00,0.00,
0.00, 0.00,
-2.40
0.00,
0.00,
-0.72
-0.72
-0.72 0.00,
0.00,
0.00,
-0.72 -0.72
0.00,
0.00,
-2.40
-0.72
0.00,
-0.72 0.00,
-0.72
0.00, -0.72
0.00,
-0.72
0.00,
-0.72
-2.40
-0.72 -0.72
-0.72
-0.72
-0.72
-2.40 -0.72
0.00, 0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
-2.40
-2.40
0.00,
0.00, -2.40
0.00, -2.40
0.00,
0.00,
-2.40 -2.40
0.00,
0.00,
-2.40
-2.40 -2.40
0.00,
0.00,
0.00, -0.72
0.00,
0.00,0.00, -0.72
0.00,
-0.72 0.00,
-0.72 0.00,
-0.72
-0.72
0.00,
-0.72
0.00,
0.00, 0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00, 0.00, -2.40
0.00, -2.40
0.00,
0.00,
-2.40
0.00,-2.40 -2.40
-2.40
-2.40
-2.40
0.00, 0.00,
0.00,
0.00, 0.00, -2.40
0.00,
0.00,
0.00, 0.00, -2.40
-2.40
0.00, 0.00,
0.00,
0.00,
0.00, 0.00,
0.00,0.00,
0.00,
-2.40-2.40 0.00,
0.00,
-2.40
-2.40-2.40 -2.40
-2.40
0.00,
0.00,
0.00, 0.00, 0.00,
0.00,
0.00,
0.00,
0.00, 0.00, 0.00,
0.00,
-2.40
-2.40
-2.40 -2.40 0.00,
-2.40
-2.40 0.00, 0.00,
0.00, 0.00,
0.00,0.00,-2.40
0.00,
0.00, -2.40
0.00, -2.40
0.00, -2.40
0.00,
0.00,
0.00, -2.40
-2.40
0.00,
0.00, -2.40
-2.40
0.00, 0.00,
0.00, 0.00,
0.00,
0.00,-2.40
0.00,
0.00, -2.40
0.00,
0.00, -2.40
0.00,
0.00, -2.40
0.00,
0.00, -2.40
0.00, 0.00,
0.00,
-2.40
0.00, 0.00,
0.00,0.00,
0.00,
-2.40
0.00,-2.40 0.00,
0.00,
0.00,
-2.40
-2.40 0.00,
0.00,
0.00, 0.00,
0.00,
-2.40
-2.40 0.00,
0.00,
-2.40
-2.40
0.00,
-2.40 -2.40-2.40
-2.40
0.00,
0.00, 0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
-2.40
0.00,
-2.40
0.00, 0.00,
-2.40
-2.40
-2.40 -2.40
-2.40 0.00,
-2.40 0.00, 0.00,
0.00, 0.00,
0.00, -2.40
0.00,
0.00,
0.00, -2.40
0.00,
0.00,-2.40
0.00,
0.00,
0.00, -2.40
0.00, -2.40
0.00,
0.00,
0.00, -2.40
0.00, -2.40
0.00,-2.40
-2.40
0.00, -2.40
-2.40
0.00,
0.00, 0.00,
0.00,
0.00,
0.00, -2.40
0.00,
0.00, -2.40
0.00, -2.40
0.00,
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
-2.40
-2.40 0.00,
0.00, 0.00,
0.00,
-2.40
0.00, -2.40 0.00,
0.00,
0.00, 0.00,
-2.40
-2.40 -2.40
0.00,
-2.40 -2.40
-2.40
0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
0.00,0.00,
0.00, 0.00,
0.00,
-2.40
-2.40
-2.40
0.00, -2.40
-2.40
-2.40
0.00,
0.00, -2.40
-2.40
0.00, 0.00,
-2.40
-2.40
0.00, -2.40
0.00, 0.00,
0.00,
-2.40
0.00, 0.00,0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
0.00, -2.40
0.00, -2.40
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
-2.40
0.00,
-2.40 -2.40
-2.40
0.00,
0.00,
0.00,
-2.40 0.00,
0.00,
-2.40-2.40-2.40
0.00,
0.00, 0.00,-2.40
-2.40
0.00,
-2.400.00,
-2.40 -2.40
-2.40
-2.40-2.40
0.00,
0.00, 0.00,0.00, -2.40
-2.40
0.00, 0.00,
0.00, 0.00,
0.00,
0.00, -2.40
-2.40
0.00,
0.00,
0.00,
0.00, -2.40
-2.40
0.00,
0.00, -2.40
0.00,
0.00,
0.00, 0.00,
0.00, 0.00,
0.00,0.00,
0.00,
-2.40
-2.400.00, 0.00,
0.00,
0.00,
0.00,
0.00,
-2.40 0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
-2.40 -2.40-2.40
0.00, -2.40
0.00,
0.00,-2.40
0.00,
0.00,
-2.40 -2.40
0.00,
0.00,
0.00,
0.00,
0.00, -2.40
0.00, -2.40
0.00,
0.00,
0.00,
-2.40
-2.40 -2.40-2.40
-2.40
0.00,-2.40
-2.40
-2.40
0.00,
0.00, 0.00,
0.00,
0.00,
0.00, -2.40
-2.40
0.00,
0.00, -2.40
0.00,
0.00,
0.00,
0.00, -2.40
-2.40
0.00, 0.00,
-2.40
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00,-2.40
0.00, 0.00,
0.00,
0.00,0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
-2.40 -2.40
0.00,0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
-2.40
-2.40
0.00,
-2.40 -2.40
-2.40
-2.40
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
-2.40 -2.40
-2.40
0.00,
0.00,
-2.40
0.00,
-2.40 -2.40
-2.40
-2.40
-2.40 MASONRY LOAD OF 31.5
0.00,0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
-2.40 -2.40
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
0.00, -2.40
-2.40
-2.40
0.00,
0.00, -2.40
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
0.00, -2.40
-2.40
-2.40
0.00,
-2.40 -2.40
0.00,
0.00,
-2.40
0.00,
-2.40 -2.40
-2.40
-2.40
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
0.00,-2.40
0.00,
-2.40
0.00,
0.00,
0.00,
0.00, 0.00, -2.40
0.00,
-2.40
0.00,
0.00,
0.00, -2.40
0.00,
0.00,0.00,
0.00,
0.00,
0.00, -2.40-2.40
-2.40 0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00, -2.40
-2.40
-2.40
0.00, -2.40
-2.40
-2.40
-2.40
-2.40 -2.40 kN/m FOR MASONRY
0.00, 0.00, -2.40
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00, -2.40
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
-2.40
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00, 0.00,
-2.40
0.00,
-2.40
-2.40
-2.40
0.00,
0.00,
0.00,-2.40
0.00,
-2.40
0.00,
-2.40
0.00,
0.00,
0.00,-2.40
-2.40
-2.40
-2.40
0.00,
0.00,
0.00,
-2.40
-2.40
-2.40
-2.40
0.00, -2.40
-2.40
0.00,
-2.40 -2.40
SUPPORTING WALLS
0.00, 0.00,
0.00,0.00,0.00,0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
-2.40 0.00,
-2.40
0.00,
-2.40 -2.40
0.00,
-2.40 -2.40
0.00, -2.40
-2.40
0.00,
0.00,
0.00,
0.00,
0.00, -2.40
-2.40
0.00,
0.00,
0.00, -2.40
0.00, -2.40
0.00,
0.00,
0.00,
0.00, -2.40
0.00, 0.00,
0.00,
0.00,-2.40
0.00, -2.40
-2.40
0.00,
0.00, -2.40
-2.40
0.00,
0.00,0.00,0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
-2.40
0.00,
-2.40-2.40-2.40
0.00, -2.40
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
-2.40
-2.40
-2.40
-2.40
0.00,0.00,
0.00,
0.00, 0.00,
-2.40
0.00,
0.00,
0.00, -2.40
-2.40
0.00,
0.00,
0.00,
0.00, -2.40
-2.40
0.00,
0.00,
0.00, -2.40
-2.40
0.00, 0.00,
0.00,-2.40
-2.40
0.00,
0.00, 0.00,
0.00,0.00,
0.00, 0.00,
0.00,
-2.40
-2.40 -2.40
-2.40
0.00,
0.00,0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
-2.40-2.40
-2.40
-2.40 -2.40
0.00,
0.00, 0.00,
0.00, 0.00,
0.00, -2.40
0.00,
0.00, -2.40
0.00,
0.00, -2.40
0.00, -2.40
0.00,-2.40
0.00, -2.40
-2.40
0.00,0.00, 0.00,
0.00,
0.00,0.00, 0.00,
0.00, -2.40
-2.40 -2.40
-2.40
0.00,
0.00,0.00,
0.00,
0.00,0.00,
0.00, 0.00,
0.00,
-2.40
0.00,
0.00, 0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
-2.40
0.00, -2.40
-2.40
0.00, -2.40
-2.40
-2.40
-2.40
0.00,0.00, 0.00,
0.00, 0.00,
0.00,
0.00,0.00,-2.40
0.00, -2.40
0.00,
0.00, -2.40
0.00, -2.40
-2.40
-2.40
0.00, 0.00, 0.00,
0.00,
-2.40 0.00,0.00,
0.00,
0.00, 0.00,0.00,
-2.40 -2.40
-2.40 -2.40
0.00,
0.00, 0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
-2.40
0.00,
0.00, -2.40
0.00,
0.00, -2.40
0.00,
0.00, -2.40
-2.40
-2.40
0.00,
0.00, -2.40
0.00, -2.40
-2.40
0.00, -2.40
0.00,
0.00,
0.00, 0.00, 0.00,
0.00,
0.00,
0.00, -2.40 -2.40
-2.40
-2.40
0.00, 0.00,
0.00,
0.00, -2.40
0.00,
0.00, 0.00,
-2.40
0.00, 0.00,
0.00,
-2.40 0.00,0.00,
-2.40 -2.40
-2.40
0.00,
0.00,
0.00,
0.00, 0.00,
0.00, 0.00,
0.00,
0.00,
0.00, -2.40
0.00,
0.00, -2.40
-2.40
-2.40
0.00,
0.00, -2.40
0.00,
0.00, -2.40
-2.40
0.00, 0.00, -2.40 -2.40
0.00, 0.00,
0.00, 0.00, 0.00,
0.00, -2.40 -2.40
-2.40
0.00, 0.00,
0.00,
0.00, 0.00, -2.40
0.00,
0.00, -2.40
0.00,
0.00, 0.00,
-2.40
0.00,
0.00,0.00, 0.00,
-2.40
0.00, 0.00,
-2.40 -2.40
-2.40
-2.40
0.00, 0.00,
0.00, 0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
-2.40
0.00, -2.40
-2.40
0.00,
0.00, -2.40
0.00, -2.40
0.00, -2.40 -2.40
0.00, 0.00, -2.40 0.00,
0.00, 0.00,
0.00, 0.00,
0.00, -2.40
-2.40 -2.40
0.00,
0.00,0.00,
0.00,
0.00,
0.00, -2.40
0.00,
0.00, 0.00,
-2.40
0.00,
0.00,0.00, 0.00,
-2.40 0.00,
-2.40-2.40 -2.40
-2.40
0.00, 0.00,
0.00,
0.00,
0.00,0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
-2.40
-2.40
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,0.00,
0.00,
-2.40
0.00, -2.40
-2.40
0.00,
-2.40
0.00,
-2.40
-2.40
0.00,
-2.40
0.00,
0.00,
0.00,
0.00, -2.40
-2.40
-2.40
-2.40
-2.40
-2.40
-2.40
-2.40
-2.40 Refer page nos. 10,11,12,
0.00, 0.00, -2.40
CLADDING 0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
-2.40
-2.40
0.00,
0.00,
0.00,
0.00,
-2.40
-2.40
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
-2.40
-2.40
0.00,
-2.40
0.00,0.00,
0.00,
0.00,
-2.40
-2.40
0.00,
-2.40
-2.40
0.00,
-2.40
-2.40
0.00,
0.00,
-2.40
-2.40
-2.40
-2.40
-2.40 13,16 & 19
0.00,
0.00,0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
-2.40
0.00, -2.40
0.00,0.00,0.00,
-2.40-2.40-2.40 -2.40
LOAD - 24.5 kPa 0.00, 0.00,
0.00,
0.00,
0.00,-2.40
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
-2.40
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
-2.40
0.00,
0.00,
-2.40
0.00,
-2.40
0.00,
-2.40-2.40
-2.40
0.00,
-2.40
0.00, -2.40
0.00,
-2.40
0.00,
0.00, -2.40
-2.40
-2.40
-2.40
-2.40
-2.40
0.00, 0.00,
0.00,
0.00,0.00,-2.40
0.00,
0.00, 0.00,
-2.40-2.40 -2.40
0.00, 0.00, -2.40
0.00,
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,0.00,
-2.40
-2.400.00,
-2.40
0.00,
0.00,0.00,
0.00,
0.00,
-2.40
0.00, -2.40-2.40
-2.40
-2.40
0.00, 0.00,
0.00, -2.40
0.00,0.00,0.00,
-2.40 0.00,
0.00,
0.00, 0.00,
0.00, 0.00,
-2.40 -2.40
-2.40
0.00, -2.40 -2.40
0.00,
0.00, 0.00,
0.00,
0.00, 0.00, -2.40
0.00,
0.00, -2.400.00,
-2.400.00,
-2.40 0.00,
0.00, -2.40-2.40
0.00, 0.00,
0.00,0.00,
0.00,
0.00, -2.40
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00, -2.40
0.00, -2.40
-2.40-2.40
-2.40
0.00, 0.00,
0.00,
0.00,
0.00,-2.40
0.00,0.00,
0.00, 0.00,
-2.40
0.00, 0.00,
0.00,
-2.40-2.40 0.00, -2.40
-2.40
0.00, 0.00,
0.00, -2.40
-2.40
0.00,
0.00,
0.00, 0.00, 0.00,
0.00,
0.00,
0.00, 0.00, 0.00,
-2.40
0.00,
0.00,-2.40
-2.40-2.40 0.00,
0.00,
-2.40 -2.40
-2.40
0.00, 0.00,
0.00, 0.00,-2.40-2.40
0.00,0.00,0.00,
0.00,0.00,
0.00,
0.00,0.00,
-2.40-2.40
-2.40
0.00, -2.40 -2.40
0.00,
0.00,0.00,
0.00,
0.00,0.00, -2.40
0.00, 0.00,
-2.40-2.400.00,
0.00, -2.40 0.00,
0.00, -2.40
-2.40
0.00, 0.00,
0.00,
0.00, 0.00,
-2.40 0.00,
0.00,
0.00, 0.00,
0.00,
0.00, -2.40-2.40
0.00, -2.40
0.00,
0.00,0.00,
-2.40-2.40
-2.40-2.40
0.00,
0.00,0.00,
0.00,0.00, -2.40
0.00,
0.00, -2.40 0.00,
0.00,
-2.40 0.00,0.00,
0.00, 0.00,
-2.400.00,-2.40 -2.40
-2.40
0.00,
0.00,
0.00,0.00, 0.00,
0.00, 0.00,
0.00,
0.00, -2.40
0.00,
0.00,
0.00, -2.40
-2.40
-2.40 0.00,
0.00,
-2.40 -2.40
-2.40
0.00, 0.00,
0.00, 0.00,
0.00, -2.40
0.00,
0.00,0.00,
-2.40 0.00,
0.00,
-2.40 -2.40
0.00, 0.00,
0.00,
0.00,
0.00, -2.40
-2.40
0.00, -2.40 -2.40
0.00,
0.00, 0.00,
0.00,
0.00, 0.00, 0.00,
-2.40
0.00, -2.400.00, -2.40
-2.40 0.00, -2.40
0.00, 0.00, 0.00,0.00,
-2.40 0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
0.00, -2.40
-2.40
0.00, 0.00,
-2.40
0.00,-2.40 -2.40
-2.40
0.00, 0.00,
0.00,0.00,
0.00,0.00,0.00,
-2.40
0.00, 0.00,
-2.40 -2.40
0.00,
-2.40 0.00,
0.00,
0.00,
0.00, 0.00,
0.00, 0.00,
-2.40
0.00,
0.00, -2.40
0.00, -2.40
-2.40
-2.40-0.72
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
0.00,0.00,
0.00, 0.00,
-2.40
0.00,-2.40 -2.40
0.00,
0.00,
0.00,
-2.40 0.00,
0.00, -2.400.00,
0.00,
0.00, -0.72
-0.72 -0.72
-0.72
0.00, -0.72
0.00, 0.00,
0.00, 0.00,
-2.40
0.00, -2.40 0.00,
0.00,
0.00,
0.00,0.00, 0.00,
0.00, 0.00,
-2.40
0.00,
0.00, -2.40
0.00,
0.00, -2.40
-2.40
0.00,
0.00, 0.00,
0.00,
-2.40
-0.72 0.00,
0.00,
-2.40 0.00,
0.00,-0.72
0.00, 0.00,
-0.72
0.00,
-0.72 -0.72
0.00,
-0.72 -0.72
0.00,
0.00,
0.00,0.00,
0.00, 0.00,
0.00,
0.00, -2.40
0.00,
0.00, -2.40
-2.40
0.00,
0.00,0.00,
0.00,
0.00,
-2.40 -2.40
0.00,0.00,
0.00,0.00,
-0.720.00,
0.00,
-0.72-0.72
0.00,
-2.40
0.00,0.00,
-0.72 0.00,
0.00,
0.00,-0.72
0.00, 0.00,
-0.72
0.00,
0.00,
-0.72 -0.72
0.00,
-0.72 -0.72
0.00, 0.00,
0.00,
0.00, 0.00,0.00,
0.00, 0.00,
0.00,
-2.40 0.00,
0.00, 0.00,
0.00,
0.00, -2.40
0.00,
-2.40 -2.40
0.00,
0.00,-0.72
0.00,
-2.40
-0.72
0.00,0.00,
-0.720.00, 0.00,
0.00, -0.72
0.00,
0.00,
-0.72 0.00,
-0.72
0.00,
0.00,-0.72 0.00,
0.00,
0.00,-0.72
0.00, 0.00, -0.72
0.00,
0.00,
-0.72 -0.72
-0.72
0.00, -0.72
0.00,
0.00, 0.00,
0.00,
0.00, -2.40
0.00, 0.00,
0.00,
0.00,
-2.40 0.00,
0.00,
0.00, 0.00,
-0.72
0.00,
0.00, 0.00, 0.00,
0.00,
0.00,-0.72 -2.40
-0.72
0.00, 0.00,
0.00,
0.00, -0.72
-2.40
-0.72
0.00, 0.00,
0.00,
-0.72
-2.40 0.00,0.00,
-0.72
0.00, 0.00,-0.72
0.00,
-0.72 0.00,
0.00,
0.00,-0.72 0.00,
0.00,0.00,
0.00,-0.720.00,
-0.72
0.00,
0.00,
-0.72 -0.72
0.00,
-0.72 -0.72
0.00,
0.00,0.00,
0.00,
0.00,0.00,
0.00,
0.00,
0.00, 0.00, -0.72
-2.40
0.00,
0.00,
-0.72
0.00, 0.00,
-2.40
-0.72
0.00, 0.00,
0.00,
-2.40 0.00,
-0.72
0.00,
0.00,0.00,
-0.72
0.00,
0.00, -0.72
-0.72 0.00,
0.00,
-0.72 0.00,
0.00,-0.72
0.00,
0.00,-0.72
0.00,
0.00,0.00,
-0.72 0.00,
-0.72
0.00, 0.00,
0.00,-0.72
0.00, -0.72
0.00,
-0.72 -0.72
0.00,
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
-2.40
0.00,
0.00, 0.00,
-0.72
0.00, 0.00,
0.00,
0.00,
0.00,
-2.40 0.00,
-0.72
0.00,
0.00,
0.00,0.00,
-0.72
-2.40
-0.72
0.00, 0.00,
0.00,
-2.40
-0.72-0.72
0.00,
0.00,
-0.72 0.00,
0.00, 0.00,
-0.72 0.00,
0.00,-0.72
0.00, 0.00,-0.72
0.00,
-0.72 0.00,
0.00,
0.00,-0.72 0.00,
0.00,
-0.72
0.00,
0.00, 0.00,-0.72
0.00,
0.00,
0.00,
0.00,
0.00,
-0.72 -2.40
0.00,
0.00,
-0.72
0.00,-0.72 -0.72
-2.40
0.00, -0.72
0.00, 0.00,
0.00,0.00,
0.00,
0.00, 0.00,
0.00,-0.72
0.00,
0.00, -2.40
0.00,
0.00,
0.00, -0.72
0.00,
0.00,
-2.40
-0.72 -0.72
0.00,
0.00, 0.00,
0.00,
0.00,0.00,
-0.72
0.00, 0.00,
-2.40
0.00, 0.00,
0.00, -0.72
0.00,
-2.40 0.00,
0.00,-0.72
-0.72 0.00,-0.72
0.00,
-0.72 0.00,
0.00,
-0.72
0.00,0.00,
-0.72
0.00,-0.72
0.00, 0.00,
0.00,
-0.720.00,
0.00,
0.00,
-0.72
0.00, 0.00,
-0.72
0.00,
0.00,0.00,-0.72
0.00,
0.00,0.00,
-0.72-2.40
0.00,0.00,
-0.72 -0.72
-2.40
0.00, 0.00,
0.00, 0.00,
0.00,
-2.40 0.00,
0.00,
0.00,0.00, 0.00,
0.00,
0.00, -2.40
0.00,
-0.72
0.00, 0.00,
-0.72
-2.40
0.00,
0.00, 0.00,
-2.400.00, -0.72
-0.72 0.00,
0.00,
-0.72 0.00,
0.00,-0.720.00,
0.00, 0.00,
-0.72 0.00,
0.00,
0.00,-0.72
-0.72
0.00,-0.72
0.00,
-0.72 0.00,
0.00,
-0.72
0.00, 0.00,
-0.72
0.00,0.00, -0.72
0.00,
0.00, 0.00,
0.00,
0.00,
-2.40
-0.720.00,
0.00,-0.72
0.00,
0.00,0.00,
0.00,-0.72
0.00, -0.72
-2.40
0.00,
-0.72 -0.72
0.00,
0.00, 0.00,
0.00,
0.00, -2.40
0.00, 0.00,
-2.40 0.00,
0.00, 0.00,
0.00, -0.72
0.00,
0.00, 0.00,
0.00, -2.40
-0.72
0.00,0.00,
0.00,
-0.72
-2.40 0.00,
0.00,0.00,
0.00, -0.72 0.00,
0.00,
0.00,-0.72
0.00,
-0.72 0.00,-0.72
0.00,
0.00,
0.00,
-0.72 0.00,
0.00,
-0.72
0.00, 0.00,
-0.720.00,
-0.72 0.00,
-0.72
0.00,
-0.72
0.00, 0.00, -0.72
0.00,
0.00,
0.00,
-0.72
0.00,0.00,
0.00,
0.00,
-0.72 0.00,
0.00,
-0.72
-2.40
0.00,
0.00, 0.00,-0.72
0.00,
0.00,
0.00,
0.00,
-2.40 -2.40
0.00,0.00,
0.00,
-0.72 -0.72-0.72
-2.40
0.00,
0.00,
0.00,0.00, 0.00,
0.00,
-2.40 0.00,
0.00,
0.00,0.00,
0.00,
-2.40
-2.40
0.00,
0.00,
0.00,0.00,
0.00,
-2.40 0.00, 0.00,
0.00,
-2.40 0.00,-0.72-0.72
0.00,
0.00, -2.40
-0.72
0.00,
0.00,0.00,0.00,
-0.72
0.00,0.00, 0.00,
0.00, -0.72
-0.72
0.00,
0.00,
0.00,
0.00,-0.72
0.00,
-0.72 0.00,
0.00,
0.00,
0.00,
-0.72 -0.72
-0.72-0.72
0.00, 0.00, 0.00,0.00,
0.00,
0.00,
-0.72
0.00, 0.00,
0.00,
0.00,
0.00,0.00,
0.00,
-0.72
0.00,
-0.72 -0.72
-0.72
-0.72
0.00,
0.00,
0.00,
0.00,
0.00, -0.72
0.00,
0.00,
-0.72
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
0.00,-0.72
-0.72
0.00,
0.00,
0.00,
0.00,
-2.40-0.72
0.00,
-0.72
-2.40
-0.72
0.00,
0.00,
-2.40 0.00,
-0.72 0.00,
-0.72
0.00, -0.72
-2.40
0.00,
0.00,0.00,
0.00,0.00,-2.40
0.00, 0.00,
-2.40 0.00,
-2.40
0.00,
0.00,0.00, -2.40
0.00, 0.00,
-2.40 0.00,
0.00, -0.72
0.00,
0.00, -0.72
0.00,0.00, 0.00,
0.00,
0.00, -0.72 0.00,
0.00,
0.00,-0.72
0.00,
-0.72 0.00,
0.00,
0.00,
0.00,-0.72
-0.72 0.00,
0.00,
0.00,-0.72
0.00, 0.00,
0.00,
-0.72 -0.72
0.00,
0.00, 0.00,
0.00,
0.00,
-0.72
0.00,
0.00, -0.72
-0.72-2.40
0.00,
0.00,
0.00,
0.00, -0.72
0.00,0.00,-0.72
0.00,
-2.400.00,
-0.72 0.00,
0.00,
0.00,0.00, -2.40
-0.72
0.00, 0.00,
0.00,
0.00,
0.00, -0.72
-2.40 -0.72
0.00,
-0.72
0.00, -2.40
-2.40
0.00, 0.00,
0.00, 0.00,
0.00,0.00,
-2.40 0.00,
0.00,
-2.40 0.00,
0.00,
0.00,
-2.40-2.40 0.00,
-2.40
0.00,
-2.40
0.00,0.00, 0.00,
0.00, -0.72
0.00,
0.00,
-0.72 0.00,
0.00,0.00,
-0.72 0.00,
0.00,
0.00,-0.72
0.00, 0.00,0.00,
0.00,
0.00,
-0.72
0.00,
-0.720.00,
0.00, -0.72
0.00,
0.00,
0.00,
0.00,
-0.72 0.00,
0.00,
0.00,
0.00,-0.72
-0.72
0.00,
-0.72 0.00,
0.00,
-0.72
-2.40
-0.720.00,
0.00, 0.00,
0.00,
-0.72
0.00,
-2.40 0.00,
0.00, -0.72
0.00, 0.00, -2.40
-0.72
0.00, -2.40
-2.40
0.00, 0.00,
0.00,
0.00,0.00, 0.00,
-2.40
0.00, 0.00,
-2.40 0.00,
-2.40 0.00,
0.00, -2.40 -2.40
0.00, -0.72 0.00, 0.00,0.00,
0.00,0.00, 0.00,
0.00,-0.72
0.00,
0.00,-0.72
-0.72 0.00,
0.00,
0.00,
-0.720.00,
0.00,
0.00,0.00,
-0.72 0.00,
0.00,
0.00,0.00,
-2.40
0.00,-0.72 0.00,
0.00,
-2.40 0.00,
-0.72
0.00,
0.00,
0.00, 0.00,
-0.72
-0.72
0.00,
0.00,
0.00,
-0.72
0.00, 0.00,
0.00, -0.72
0.00,
-2.40
0.00,
-0.72 0.00,
-0.72
-2.40 0.00, -2.40 -2.40
0.00, 0.00,
0.00, 0.00,
-2.40
0.00, 0.00,
-2.40 0.00, 0.00,
0.00, -2.40
0.00, 0.00,
0.00,
-2.40
0.00,0.00,0.00,
-2.40
0.00,
0.00,-0.72 -0.72
0.00,
-0.72 -0.72 0.00, 0.00,
0.00, 0.00,
0.00,0.00,
-0.720.00,
0.00,
0.00, -0.72
0.00,0.00,
0.00,0.00,
0.00,-0.72
0.00,
-0.72 0.00,
0.00,
0.00,
0.00,-0.72
-0.72
0.00, 0.00,
0.00,
-2.40
0.00,
0.00,
-0.72
-2.400.00,
0.00,
0.00,-0.72
0.00,
-0.72
0.00, 0.00,
0.00,
0.00,-0.72
-0.72 0.00,
0.00, -2.40
-2.40 -2.40
-2.40
0.00, 0.00,
0.00,
0.00,0.00, 0.00,
-2.40
0.00, 0.00,
0.00,
-2.40
0.00, 0.00,
-2.40 0.00,
0.00,
0.00,
0.00, -2.40
0.00,
0.00,-0.72
-2.40
-0.72
0.00,0.00,
0.00,
-0.72
0.00,
0.00,-0.72
0.00, 0.00,-0.72
-0.72 -0.72 0.00, 0.00,0.00,
0.00,
0.00,
0.00,-0.72
0.00,
0.00,
0.00,-0.72 0.00,
0.00,0.00,
-2.400.00,
-0.72 0.00,
0.00, 0.00,
0.00,
0.00,-0.72
0.00,
0.00,0.00,
0.00,
0.00,-0.72
-2.40
-0.72
0.00, 0.00,
0.00, -0.72
0.00,
0.00,
0.00,
-0.72
-2.40 0.00, -2.40
0.00,
-2.40
0.00, -2.40
-2.40 -2.40
0.00, 0.00,
0.00, 0.00,
0.00, 0.00,
-2.40
0.00, 0.00,
-2.40 0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
-0.72
-2.40
0.00,
0.00, 0.00,
-2.400.00,
-0.72
-2.40
0.00,
-0.72
0.00, -0.72
0.00,
-0.72 0.00,
0.00,0.00,
-0.72
0.00,0.00,
0.00,-0.72 -0.72
0.00,
-0.72 -0.72 0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00, 0.00,
0.00, -2.40
-0.72
0.00,
0.00, 0.00,-0.72
-2.40
-0.72 0.00,
0.00,0.00,
-0.720.00, 0.00,
0.00,
-0.72 0.00,
-2.40
0.00, 0.00,-2.40
-2.40 -2.40
0.00,
0.00, 0.00,
0.00,
0.00, 0.00, -2.40
0.00,0.00,
0.00,
0.00, 0.00,
-2.400.00,
0.00, -0.72
0.00,
-0.72 0.00, -2.40
0.00,
-0.72
0.00,
0.00, 0.00,0.00,
0.00,
-0.72
-2.40
0.00,
0.00,
0.00,
0.00,-0.72
-0.72 0.00,
0.00, -0.72
-0.72 0.00,
0.00, 0.00,
-0.72
0.00,0.00,
0.00,-0.72 -0.72
0.00,
-0.72 -0.72
0.00, 0.00,
0.00,
0.00,0.00,
-2.40
0.00,
0.00,
0.00, -2.40
0.00,
0.00, 0.00,
-0.72 0.00,
-0.72
-2.40
0.00, 0.00,
0.00, 0.00,
0.00, -2.40
0.00, -2.40
-2.40
-2.40
0.00, 0.00,
0.00,
0.00,0.00,
0.00,
0.00,
0.00,
-2.40
0.00, 0.00,
-2.40
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-2.40 0.00,
0.00,
0.00,0.00,
-2.40
0.00,
0.00,
-2.40
-0.72
0.00,
0.00, 0.00,
-2.40
0.00, 0.00,
-0.72
-0.72
0.00, 0.00,
-2.40 -0.72
-0.72 0.00,
0.00,
-2.40 0.00,
-0.72 0.00,
0.00,0.00,
0.00,-0.72
0.00,0.00,
0.00,
-0.72
-0.72
0.00,
0.00,
-0.72
0.00,
-0.72 0.00,
-0.72
0.00,
-0.72
-0.72
0.00, 0.00,
0.00, 0.00,-2.40
0.00, 0.00,
0.00,
-2.40 0.00,
0.00,
0.00, -0.72
0.00, 0.00,
0.00, 0.00,
-2.40
0.00, -2.40
0.00, -2.40
0.00,
0.00,-2.40 -2.40
-2.40
0.00, 0.00, 0.00,
0.00,
-2.40 0.00,
0.00,
0.00, -2.40
0.00,
0.00,
0.00,
-2.40 0.00,
0.00, 0.00,
-0.72
0.00,0.00,0.00,
0.00, -0.72
0.00,
-2.400.00,-0.72
-0.72 0.00,
0.00,
-0.720.00, 0.00,
-0.72 -0.72
0.00, 0.00, 0.00, -2.40 0.00,
0.00, 0.00,
0.00,
0.00,
0.00, -2.40
-2.40
0.00,
0.00, -2.40
-2.40
0.00,
0.00,0.00,
0.00, 0.00,
-2.40 0.00,
0.00,
-2.40 0.00,0.00,
0.00, 0.00,
-2.40
0.00,
-2.40
0.00, -0.72
0.00,
0.00,
-0.72 0.00,
0.00,
-0.72
0.00, 0.00,
-0.720.00,-0.72-0.720.00, 0.00,
0.00, -2.40
0.00, 0.00,
-2.40 0.00,
0.00, 0.00, -2.40
0.00, 0.00,
0.00, -2.40 0.00,
0.00, -2.40
0.00,-2.40 -2.40
0.00,
0.00,0.00,
0.00, 0.00,
-2.40 0.00,
-2.40 0.00,
0.00,
0.00, -2.40
0.00,
0.00,
-2.40 0.00,
0.00,
-0.72 0.00,
0.00, -0.72 0.00,-0.72-0.72 0.00, 0.00, -2.40 0.00,0.00,0.00,
0.00,
0.00,-2.40
0.00,-2.40 -2.40
0.00, 0.00,
0.00, 0.00, 0.00,
-2.40 0.00,
-2.40 0.00,0.00, -2.40-2.40 0.00, 0.00,
0.00, 0.00, 0.00,
0.00, -0.72 -0.72-0.72 0.00, 0.00,
-0.72 0.00,
-2.40 0.00,
0.00, -2.40
0.00, 0.00,
-2.40
0.00, 0.00, 0.00,
0.00,
0.00, 0.00, -2.40
-2.40
0.00, -2.40
-2.40
0.00,
0.00,0.00,
0.00, 0.00,
-2.400.00,
-2.40 0.00,0.00,-2.40-2.40 0.00, 0.00, -0.72 0.00, 0.00,
0.00, -2.40
0.00, 0.00,
-2.40 0.00,
0.00, 0.00, -2.40
0.00, 0.00,
0.00, -2.40
0.00,-2.40 -2.40
0.00, 0.00,
0.00, 0.00,
0.00,-2.40
0.00, 0.00,
-2.40 0.00, 0.00,
-2.40-2.40 0.00, -2.40 0.00, 0.00, 0.00,
-2.40 0.00, 0.00,
-2.40
0.00,0.00,
0.00, 0.00, -2.40
0.00,
0.00, 0.00,-2.40
-2.40 -2.40
0.00,
0.00,0.00, 0.00,
0.00, -2.40
0.00, 0.00,
-2.40 0.00, -2.40
-2.40 0.00, 0.00, 0.00,
-2.40 0.00,0.00, -2.40
0.00, 0.00,
0.00,
-2.40 0.00,
0.00, -2.40
-2.40
0.00, 0.00,0.00,
0.00,
-2.40 0.00, 0.00,
0.00, -2.40
0.00,0.00,
-2.40 0.00, -2.40-2.40 0.00, 0.00,
0.00, 0.00,0.00,
-2.40 0.00,-2.40 0.00,
0.00,
-2.40
0.00, 0.00, 0.00,
0.00, 0.00,
0.00, -2.40
0.00, -2.40
0.00,
-2.40 -2.40 -2.40
0.00,
0.00,0.00,
0.00, 0.00,
-2.40 0.00,
-2.40 0.00,0.00,-2.40-2.40 0.00, 0.00, 0.00,
-2.40 0.00, 0.00,
-2.40 0.00,
0.00, 0.00,
-2.40 -2.40
0.00,
0.00,0.00,0.00, 0.00,
-2.40-2.40
0.00,0.00,0.00, -2.40-2.40 0.00, 0.00, 0.00,
-2.40 0.00,
0.00, 0.00, 0.00,
0.00,
-2.40
0.00, 0.00,
0.00, -2.40
0.00, -2.40
-2.40-2.40
0.00, 0.00,
0.00, 0.00,0.00,
-2.400.00,
-2.40 0.00,0.00, -2.40
-2.40 0.00, 0.00, 0.00,
-2.40
0.00,0.00, 0.00,0.00,
0.00,
-2.40
0.00, 0.00,
0.00,
-2.40 0.00,
0.00,
0.00,
0.00, -2.40
0.00,
0.00, -2.40
0.00, -2.40
-2.40
-2.40 -2.40
0.00,
0.00,0.00,
0.00, 0.00,
-2.400.00,
-2.40 0.00,
0.00,
0.00, -2.40-2.40
0.00, -0.72 0.00, 0.00,
0.00, -2.40
0.00, 0.00,
-2.40 0.00,
0.00, 0.00,
-2.40
0.00, 0.00, 0.00,
0.00, -2.40 -2.40
-2.40
0.00, 0.00, 0.00,
-2.40
0.00, 0.00,
0.00, 0.00,
-2.40-2.40 0.00,
0.00, -2.40
0.00, -0.72 0.00, 0.00, 0.00,
-2.40 0.00, 0.00,-2.40 0.00, -2.40
0.00, 0.00,
0.00, 0.00,-2.40
0.00,
-2.40
0.00, 0.00,0.00,
0.00,0.00,0.00,
-2.400.00,
0.00,
-2.400.00,
0.00,-0.72
-0.72 0.00,
0.00, -0.72 -0.72
0.00, -0.72
0.00, 0.00,
0.00, -2.40
0.00, 0.00,
-2.40 0.00,0.00,
0.00, 0.00,
0.00,
-2.40 0.00,
0.00,
0.00,
0.00,
0.00,
0.00, -2.40
0.00,
-2.40
0.00,
-2.40
-2.40 -2.40
-2.40
0.00, 0.00,
0.00, 0.00,0.00,
-2.40
0.00, 0.00,-2.40
0.00,
0.00,
0.00, -2.400.00,
0.00,0.00,
0.00,
-2.40
0.00,
0.00,0.00,
0.00, -2.40
-0.72
0.00,0.00,
0.00,-0.72
-2.40 0.00, -0.72
0.00,
-0.72 0.00,
-0.72 -0.72 0.00, 0.00,
0.00,
0.00,
-2.40
0.00, 0.00,
-2.40
0.00,
0.00, 0.00,
0.00, 0.00,
-2.40
0.00, 0.00,
-2.40 -2.40
0.00, -2.40-2.40
0.00,
0.00,0.00,
0.00, -2.40
0.00,
0.00,
-2.40 0.00,
0.00,
0.00, 0.00,
-2.40
0.00, -0.72
0.00,
0.00,-0.72
0.00,
0.00,
-0.72 0.00,
0.00,
-0.72
0.00, 0.00,
-0.72
0.00,-0.72-0.72 0.00, 0.00, -2.400.00, 0.00,0.00,
0.00,
0.00,
-2.40 0.00,
0.00, 0.00,
0.00, -2.40
0.00, -2.40
-2.40 -2.40
0.00, 0.00,
0.00, 0.00,0.00,
0.00,
-2.40 0.00,
0.00,-2.40
0.00,
0.00,
0.00, 0.00,
-2.40 0.00,
-0.72
0.00, -2.40
0.00, -0.72
0.00,
-2.40 0.00, 0.00,
0.00,
-0.72
0.00,0.00,
-0.72
0.00, -0.72
0.00, 0.00,
-0.72 -0.72 0.00, 0.00,
0.00, -2.40
0.00, 0.00,
-2.40 0.00,
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
-2.40 -2.40
0.00,
0.00, -2.40 -2.40
-2.40
0.00,
0.00,0.00,0.00,
0.00,
0.00, 0.00,
-2.40
0.00,0.00,
0.00,
-2.40 0.00,0.00,
0.00,
0.00,
-2.40
-0.72
0.00,
-2.400.00,
-0.72
0.00, 0.00,
0.00, -0.72
-2.40 0.00,
0.00,
-0.72
0.00,0.00,
-0.72
0.00,
0.00,-0.72
0.00,
0.00,
-0.72 0.00,
-0.72 -0.720.00,
0.00, 0.00,
-2.40 0.00, 0.00,
-2.40
0.00, 0.00,0.00,
0.00, -2.40 0.00, -2.40
-2.40
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
-2.40
0.00, 0.00,
-0.72
0.00,
-2.40 0.00,
-0.72
0.00, -2.40
0.00,
0.00, -0.72
-2.40 0.00,
0.00,
-0.72 0.00,
0.00, -0.72
0.00,
0.00,-0.72
0.00,
0.00,
-0.72 0.00,
-0.72-0.72 0.00, 0.00, 0.00,
-2.40 0.00, 0.00,
0.00,
-2.40 0.00, 0.00,
0.00, 0.00, -2.40
-2.40 -2.40
0.00, 0.00,
0.00,
-2.40
0.00,
0.00, 0.00,
0.00,
0.00,-2.40 0.00,
0.00,
0.00,
0.00,
0.00,
-2.40
0.00,
0.00,
0.00, -0.72
-2.40
0.00,
0.00, 0.00,
0.00,
0.00,
-2.40
-0.72
-0.72 0.00,
0.00,
-2.40
-0.72
0.00,0.00,
-0.72
0.00,
0.00,-0.72
0.00,
0.00,
-0.72 0.00,
-0.72-0.72 0.00, 0.00, 0.00,
-2.40 0.00,
0.00, 0.00,
0.00, 0.00,
0.00,
0.00,
0.00, 0.00,
-2.40
0.00, -2.40
0.00,
0.00,
-2.40 -2.40
0.00,
-2.40
-2.40-2.40
0.00, 0.00,
0.00, 0.00,
-2.40
0.00,0.00, 0.00,
-2.40 0.00,
0.00, 0.00,
-2.40
0.00,
-0.72 0.00,
-0.72
0.00, -0.72
0.00,
0.00, 0.00,
-0.72 -0.720.00, 0.00,0.00, -2.40 0.00,
0.00, -2.40
0.00,0.00,0.00,
0.00,
-2.40 0.00,
0.00, 0.00,
0.00, -2.40
0.00, -2.40
-2.40 -2.40
0.00, 0.00,
0.00, 0.00,
0.00,
0.00,
-2.40 0.00,
0.00,-2.40
0.00, 0.00,
-0.72
0.00,
-2.400.00,0.00,0.00,
-0.72
0.00, -0.720.00,
-0.72 -0.72 0.00, 0.00, -2.400.00, 0.00,
0.00,
0.00, 0.00,
0.00,0.00,
-2.40 -2.40
0.00, -2.40 -2.40
0.00, 0.00, -2.40
0.00, 0.00,
0.00, 0.00,
-0.72
0.00, -0.72 0.00, 0.00, -2.400.00, 0.00,
0.00,0.00, 0.00,
-2.40 0.00, -2.40-2.40
0.00,0.00, 0.00,0.00, -2.40
0.00,
-2.40 0.00,
0.00, -0.720.00,
0.00, -0.72-0.72 0.00, 0.00, 0.00,
-2.40 0.00,
0.00,
-2.40
0.00, 0.00,0.00,
0.00,
-2.40 0.00, 0.00,
0.00,
0.00, 0.00, -2.40 -2.40
-2.40
0.00,-2.40 -2.40
0.00, 0.00,0.00, -2.40 0.00, -0.72 0.00, 0.00, -2.40 0.00, 0.00,
0.00, 0.00,
0.00,
-2.40 -2.40
0.00, 0.00, -0.72 0.00, 0.00, -2.40 0.00,0.00,0.00,
0.00, 0.00,
0.00, 0.00,
-2.40 -2.40
0.00, -2.40
-2.40
0.00, 0.00, -0.72 0.00, 0.00,0.00,-2.40 0.00,
0.00,
-2.40
0.00,0.00,0.00,
0.00,
-2.40 0.00,
0.00, 0.00,
0.00, -2.40
0.00, -2.40
-2.40 -2.40
0.00, 0.00,
0.00, 0.00,
0.00, -0.72 -0.72
0.00, -0.72 0.00, 0.00,
0.00, -2.40
0.00, 0.00,
-2.40 0.00,
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
-2.40 -2.40
0.00,
0.00, -2.40 -2.40
-2.40
0.00, 0.00,
0.00,0.00, 0.00,
-0.72
0.00,
0.00,-0.72
0.00,
-0.72 -0.72 0.00, 0.00, 0.00,
-2.40 0.00, 0.00,
-2.40 0.00, 0.00,-2.40 0.00, -2.40
0.00, 0.00,
0.00,
0.00,0.00,
-0.72
0.00,
0.00,-0.72
0.00,
0.00,
-0.72 0.00,
-0.72 -0.72 0.00, 0.00, 0.00,
-2.40 0.00,0.00,0.00,
0.00,
-2.40 0.00,
0.00, 0.00,
0.00, -2.40
0.00, -2.40
-2.40 -2.40
0.00,
0.00, 0.00, 0.00, 0.00,
-0.72
0.00, -0.72
0.00,
0.00, 0.00,
-0.72 0.00,
0.00,
0.00,-0.72
0.00, 0.00,
-0.72
0.00,0.00,
-0.72 0.00, 0.00,
-0.72-0.72 0.00, 0.00, -2.40 0.00, 0.00,
0.00, 0.00, 0.00,
-2.40 0.00,
0.00, -2.400.00,
-2.40 0.00,
-2.40 0.00, 0.00,
0.00,
0.00, 0.00,
-2.40 -2.40
0.00,
0.00, -2.40 -2.40
-2.40
0.00, 0.00,
0.00, 0.00,
-0.72
0.00, 0.00,-0.72
0.00, 0.00,
0.00,
-0.72 0.00,
-0.72
0.00, 0.00, -0.72
0.00, 0.00,
0.00,
-0.72 0.00,
-0.72-0.72 0.00, 0.00,0.00,
-2.40 0.00,
0.00, 0.00,
-2.40
0.00, 0.00,
0.00,
0.00, -2.40
-2.40
-2.40
0.00, 0.00,
0.00, 0.00, -0.72
0.00,
-0.72 0.00,
0.00, 0.00,
-0.72
0.00, 0.00,
-0.72
0.00, 0.00,
0.00,
-0.720.00,
-0.72 -0.72 0.00, 0.00, -2.40
0.00,0.00,
0.00, 0.00,
0.00,
-2.40
0.00, 0.00,
-2.40
0.00, -2.40
-2.40
0.00,0.00,
0.00,0.00,
0.00,
-0.72 0.00,
-0.72
0.00,-0.72
0.00,
0.00, 0.00,
-0.72
0.00,-0.72
0.00,
0.00, 0.00,
-0.72 0.00, 0.00,
-0.72 -2.40
0.00, 0.00, 0.00,
0.00,
-2.40 0.00,
0.00,0.00,
0.00,0.00,
-2.40 -2.40
0.00, -2.40
-2.40
0.00, 0.00,
0.00,0.00,
0.00,
0.00,-0.72 0.00,
0.00,-0.72
0.00, 0.00, -0.72
0.00,
-0.72
0.00,
0.00,
-0.72
0.00,
0.00,
-0.72
0.00, -0.72
0.00, 0.00,
-0.72 -0.72 0.00, 0.00,
0.00,
-2.40
0.00,
0.00, 0.00,
-2.40
0.00,
-2.40
0.00,
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
-2.40 -2.40
-2.40
0.00,-2.40-2.40
0.00, 0.00,
0.00,0.00, -0.72
0.00, 0.00,
0.00,
-0.720.00,
0.00,
-0.72
0.00,0.00,
-0.72
0.00,-0.72
0.00, 0.00,
-0.72-0.72 0.00, 0.00, 0.00,
-2.40
0.00, 0.00,
0.00,
0.00, 0.00,
-2.40
-2.40 -2.40
0.00,0.00,
0.00, 0.00,
0.00,
-0.72 0.00,
0.00,-0.72
0.00,-0.72
0.00, 0.00,
-0.72 -0.72 0.00, 0.00, 0.00,
0.00,
-2.40
0.00, 0.00,
0.00,
0.00,
0.00, -2.40
0.00,-2.40
-2.40 -2.40
0.00, 0.00,
0.00, 0.00,
-0.72
0.00,-0.72 0.00, 0.00,
0.00, -2.40
0.00,
0.00,
0.00, 0.00,
0.00,-2.40
0.00, -2.40
-2.40
-2.40
0.00, 0.00,
0.00,
0.00,0.00,
0.00,
0.00,
-0.72
0.00,
0.00,
-0.72 -0.720.00,
0.00,
-0.72 -0.72-0.72 0.00, 0.00, -74.85 0.00,
0.00,0.00,
0.00,
0.00, -2.40
0.00,0.00,
-2.40
0.00, -2.40
-2.40
0.00,
0.00, 0.00, -2.40
0.00, -2.40
0.00, 0.00,
0.00, 0.00,
0.00,
0.00,
-0.72 0.00,
0.00,
-0.72 -0.72 -0.720.00, 0.00,
0.00, 0.00,
-74.85 -74.85 0.00, 0.00,
0.00,
0.00, 0.00,
0.00, -2.40
-2.40
-2.40
0.00,0.00, 0.00,
0.00, 0.00,
0.00,
0.00,
-0.720.00,0.00,
-0.72 -0.72 -0.72
0.00,0.00,
0.00,0.00,
0.00,
-74.850.00,
0.00, -74.85 -74.85
0.00, -74.85 0.00, 0.00,
0.00, -2.40
0.00,
0.00, 0.00,-2.40
-2.40
0.00,
0.00, -0.72
0.00,
0.00, 0.00,
0.00,
-0.72 0.00,
-0.72 -0.72
0.00, 0.00, 0.00,
0.00, 0.00,
-74.85
0.00,
0.00,
-74.85
0.00, -74.85
0.00, 0.00,
-74.85 -74.85 0.00,
0.00, 0.00,
0.00, -2.40
-2.40
0.00,0.00,
0.00, 0.00,
0.00,-0.72
0.00,-0.72
0.00, 0.00,
0.00,
-0.72 0.00,
0.00,
-0.72 0.00,
0.00,-0.72
0.00, -0.72
0.00,
0.00,0.00,0.00,
0.00,
-74.85
-0.72
0.00, 0.00,
0.00,
-74.85
0.00, 0.00, -74.85
0.00, 0.00,
-74.85 0.00, 0.00,
-74.85 -74.85-74.85 0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
-2.40 -2.40
-2.40
0.00, 0.00, -0.72
0.00, 0.00,
0.00, 0.00,
-0.72
0.00, -0.72
0.00,
0.00, 0.00,
-74.85 -74.85
0.00, 0.00,
0.00, 0.00,
0.00,
-74.850.00,
-74.85 -74.85 0.00, 0.00, -2.40
0.00, 0.00,
0.00,0.00, 0.00,-0.72
0.00, 0.00,
0.00,
-0.72 0.00,
0.00,-0.72 -0.72
0.00,
0.00, 0.00,
0.00, 0.00,
0.00,
-0.72 0.00,
0.00,
-0.72
0.00,0.00,
0.00, -0.72
0.00,
0.00,
-74.85-0.72
0.00,
0.00,
0.00,
0.00, -74.85 0.00,
-74.85
-0.72
0.00,
0.00, 0.00, -74.85
0.00, 0.00,
-74.85 0.00,0.00,
0.00,
-74.85 -74.850.00,
-74.85 0.00,
-74.85
0.00, 0.00,
0.00, -2.40
-2.40
0.00,
0.00,-0.72
0.00,
0.00, 0.00,
-0.72 -0.72
0.00, 0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
-0.72 0.00,
0.00,
-0.72
0.00, -0.72
0.00,
-74.85
0.00,-74.85
0.00,
0.00,
-74.85
0.00,
0.00, 0.00,
-74.850.00, 0.00,
0.00,
-74.85
0.00,
0.00,
-74.85 0.00,
-74.85-74.85 0.00,
-74.85
0.00, 0.00,
0.00, -2.40
-2.40
0.00,0.00,
0.00, 0.00,
-0.72
0.00, -0.72
0.00,
0.00, 0.00,
-0.72 -0.72
0.00,
0.00, 0.00,
0.00, 0.00,
0.00,
0.00, 0.00, 0.00,
-74.850.00,
-0.72
-74.85 -0.72
-74.85
0.00, 0.00,
0.00, 0.00,
0.00,0.00,
-74.850.00, 0.00,
-74.85 -74.85
-74.85
0.00,0.00,
0.00, 0.00,
-0.72
0.00, 0.00,
-0.72
0.00, 0.00,
0.00,
-0.72 0.00,
0.00,
0.00, -0.72 -0.72
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
-74.85
-0.72
-74.85
0.00,
0.00,
0.00,
0.00,
-74.85
-0.72
0.00, 0.00,
0.00,
-74.85
0.00,
0.00,
-74.85 0.00,
-74.85
0.00,
-74.850.00, 0.00,
-74.850.00,
-74.850.00,
-74.85 0.00,
0.00,
-74.85 0.00,
0.00, -2.40
-2.40
0.00, 0.00,
0.00, 0.00,
-0.72 -0.72
0.00, 0.00, -0.72
0.00, 0.00, -74.850.00, 0.00,
0.00, 0.00,
0.00,
-74.850.00,
-74.85-74.85
0.00, 0.00, -2.40
0.00,0.00,
0.00,0.00, 0.00,
-0.72 0.00,
-0.72
0.00,
0.00, -0.72
0.00,
0.00,
0.00,
0.00, 0.00,
0.00, -74.85
-0.72
-74.85
0.00, -0.72
0.00,
0.00, 0.00,
0.00,
-74.85
0.00,
0.00,
-74.85 -74.85
0.00,0.00,
0.00, 0.00,
-74.850.00,
-74.85 -74.85
0.00, 0.00, -2.40
0.00,0.00,
0.00,0.00, 0.00,
-0.720.00,
0.00,
0.00,-0.72
0.00,
0.00, -0.72
0.00,
0.00,0.00,
0.00,
0.00,
-74.85
0.00,
-74.85
0.00,
-0.72
-74.85
0.00, 0.00,
-0.72
0.00, 0.00,
-74.85
0.00,
-74.85
0.00, 0.00,
-74.85
0.00,0.00,
0.00, 0.00,
-74.85 -74.85
-74.85
0.00,0.00,
0.00,
0.00,0.00,
0.00,-0.72
0.00,
0.00,
0.00, -0.72
0.00,
0.00,
0.00,
0.00,
-74.85-74.85
0.00,
0.00,
-0.720.00,-74.85
-0.72
0.00,
0.00,
0.00,
-74.85
0.00,
-74.85
0.00, 0.00,-74.85
0.00,0.00,
0.00, 0.00,
-74.85-74.85-74.85
0.00,
0.00,0.00,
0.00,
0.00, -0.72
0.00,
0.00, 0.00,
-74.85-74.85
0.00,
-74.85
0.00,
0.00,
0.00,
0.00,
-74.85
0.00,
0.00,-74.85 -74.85
0.00,
0.00, 0.00,
0.00, 0.00,
-74.85-74.85-74.85
0.00,
0.00, 0.00,0.00,
0.00,0.00,
0.00, -0.72
0.00,
-74.85-74.85-74.85
0.00, 0.00,
0.00, 0.00,
-74.85 -74.85
0.00, 0.00,
0.00, 0.00,
-74.85 -74.85
0.00,
0.00,0.00, 0.00,
0.00,0.00, 0.00,
0.00,
-74.850.00, -0.72
0.00,
-74.85 -74.85
0.00,
-74.850.00, 0.00, -74.850.00, -74.85
0.00, 0.00, -74.85
0.00, 0.00,
0.00, 0.00,
0.00,
-74.850.00,
-74.85 -74.85
0.00, 0.00, -74.85
0.00, 0.00,
0.00, 0.00,
0.00,-74.85
0.00, -74.85
0.00, 0.00,
0.00,0.00,
-74.850.00, 0.00,
0.00,
-74.85 0.00,
-74.85-74.85
0.00,
-74.85
0.00,
0.00, 0.00,
-74.85 -74.85
0.00, 0.00,
0.00, 0.00,
0.00,-74.85
0.00,-74.85
0.00, 0.00,
0.00,0.00,
-74.850.00,0.00,
-74.850.00,
0.00,
0.00,
-74.85
0.00,-74.85
0.00,0.00,-74.85
0.00,
-74.850.00,
-74.85 -74.85
0.00, 0.00,
0.00, 0.00,
0.00, 0.00,
-74.85 -74.85
0.00,
0.00,
0.00, 0.00,
-74.85
0.00,
0.00,-74.850.00,
0.00,-74.85
0.00, 0.00,-74.85
0.00,0.00,
-74.850.00,
-74.850.00,
-74.85 -74.85
0.00,
0.00, 0.00, 0.00,
-74.85
0.00, 0.00, -74.85
0.00, 0.00,
0.00,
-74.85 0.00,
-74.85
0.00,-74.85
0.00,
0.00, 0.00,
0.00,
-74.850.00,
-74.85 -74.85
0.00,
0.00, 0.00, 0.00,
-74.85
0.00, -74.85
0.00,
0.00, 0.00,
0.00,
-74.85 0.00,
-74.85
0.00,-74.85
0.00,
0.00, 0.00,
-74.85 -74.85
0.00, 0.00, -74.85
0.00,0.00,
0.00,0.00, 0.00,
-74.850.00,
-74.85
0.00, 0.00, -74.85
0.00, 0.00,
0.00,
-74.85 0.00,
0.00,-74.85 -74.85
0.00,
0.00,
0.00,
0.00,
-74.85
0.00,
-74.85 -74.85
0.00,0.00,
0.00, 0.00,
-74.85 -74.85
0.00, 0.00, -74.85
0.00, 0.00, -74.85
0.00,0.00,
0.00,0.00, 0.00,
-74.85 0.00,
-74.85
0.00, -74.85
0.00,
0.00, 0.00,
-74.85 -74.85
0.00,0.00,
0.00,0.00, 0.00, 0.00,
-74.85-74.85-74.85
0.00, 0.00,
0.00, 0.00,
-74.85-74.85
0.00,0.00,
0.00,0.00, 0.00, 0.00,
-74.85-74.85
0.00,
-74.85
0.00,
0.00, 0.00,
-74.85 -74.85
0.00,0.00,
0.00,
0.00,
0.00,
-74.85
0.00,
0.00,
-74.85
0.00,
-74.85
0.00, 0.00,
-74.85-74.85
0.00, 0.00,
0.00, -74.85
0.00, -74.85
0.00,0.00,
0.00,0.00,
-74.85-74.85
0.00, 0.00, -74.85
0.00,
0.00, 0.00,
0.00,
0.00, -1.00
0.00,
-1.00 -1.00
0.00, 0.00,
0.00, 0.00,
0.00,
-1.00
0.00, 0.00,
0.00,-1.00
0.00, -1.00
0.00,
-1.00 -1.00
0.00, 0.00,
0.00,
0.00, 0.00,
-1.00
0.00,
0.00, -1.00
0.00,
0.00,
-1.00 0.00,
0.00,
-1.00
0.00, 0.00,
0.00,-1.00
0.00, -1.00
0.00,
-1.00 -1.00
0.00,
0.00, 0.00,
0.00,
0.00, -1.00
0.00,
-1.00 0.00,
0.00,
-1.00
0.00, 0.00,
-1.00
0.00, -1.00
0.00,
0.00,
-1.00 0.00,
0.00,
-1.00
0.00, 0.00,
-1.00
0.00,
0.00, -1.00
-1.00
0.00, -1.00
0.00, 0.00,
0.00, 0.00,
-1.00
0.00, 0.00,
-1.00
0.00,
0.00, -1.00
0.00,
-1.00 0.00,
0.00,
-1.00 0.00,
-1.00
0.00, -1.00
0.00,
0.00, 0.00,
0.00,
-1.00 0.00,
-1.00
0.00, -1.00
0.00, -1.00
0.00, 0.00,
0.00,
0.00, -1.00
0.00,
0.00, 0.00,-1.00
0.00,
-1.00 0.00,
-1.00 0.00,
-1.00
0.00, 0.00,
-1.00
0.00,
0.00, -1.00
0.00,
-1.00 0.00,
0.00,
-1.00
0.00, 0.00,
-1.00
0.00,
0.00, -1.00
0.00,
0.00,
-1.00 0.00,
-1.00 -1.00
0.00,
0.00, 0.00,
0.00,
0.00, -1.00
0.00,
0.00,
-1.00 0.00,
0.00,
-1.00 0.00,
0.00,
0.00,-1.00 0.00,
0.00,-1.00
0.00, 0.00,-1.00
0.00,
-1.00 0.00,
0.00,
-1.00 0.00,
-1.00
0.00, -1.00
0.00,
0.00, 0.00,
0.00,
-1.00 0.00,
0.00,
-1.00
0.00, 0.00,
-1.00
0.00,
0.00, -1.00
0.00,
-1.00 -1.00
0.00,0.00,
0.00,0.00,
0.00,
-1.00
0.00, 0.00,
0.00,
-1.00
0.00,
0.00, 0.00,
0.00,-1.00
-1.00
0.00, 0.00,-1.00
0.00,
-1.00 0.00,
0.00,
-1.00 0.00,
0.00,
0.00,-1.00 0.00,
-1.00
0.00,
0.00, -1.00
0.00,
0.00,
-1.00 0.00,
0.00,
-1.00 0.00,
-1.00
0.00, -1.00
0.00,
0.00, 0.00,
0.00,
-1.00 0.00,
-1.00 -1.00
0.00, 0.00,
0.00,
0.00,0.00,
0.00,0.00,
-1.00
0.00,
0.00,
-1.00-1.00
0.00,
0.00,
-1.000.00,
0.00,
-1.000.00,
-1.00
0.00, 0.00,
-1.00
0.00,
0.00, 0.00,0.00,
0.00,
-1.000.00,
-1.00 -1.00
0.00,
0.00, -1.00
0.00,
-1.000.00, 0.00,
0.00,
-1.00 0.00,
0.00,
-1.00
0.00, 0.00,
0.00, -1.00
-1.00 0.00,
0.00,
0.00,
-1.00 0.00,
0.00,
0.00,
-1.00 0.00,
-1.00
-1.00 -1.00
0.00, 0.00,
0.00,0.00,
0.00,
-1.00 0.00,
0.00,
-1.00
0.00, -1.00
0.00,
0.00,
0.00, -1.00
0.00,
0.00,0.00,
-1.00 0.00,
-1.00 0.00,
0.00,
-1.00
0.00, -1.00
-1.00
0.00,
0.00, -1.00
0.00,
-1.00 0.00,
-1.00 0.00,
-1.00
0.00, -1.00
0.00, 0.00,
0.00,
-1.00 0.00,
0.00,
-1.00 0.00,
-1.00
0.00, -1.00
0.00, -1.00
0.00,0.00,
0.00,
0.00, 0.00,
-1.00
0.00,
0.00, -1.00
0.00,
0.00,
-1.000.00,
0.00,
-1.000.00,
0.00,
-1.000.00,
-1.00
0.00, -1.00
0.00,
0.00,
0.00, -1.00
0.00,
0.00,
-1.00 0.00,
0.00,
-1.00 0.00,
-1.00
0.00, -1.00
0.00,
0.00, 0.00,
0.00,
-1.00 0.00,
0.00,
-1.00
0.00, 0.00,
-1.00
0.00,
0.00, -1.00
0.00,
0.00,
-1.00 0.00,
-1.00 -1.00
0.00, 0.00,
0.00, 0.00,
0.00,
-1.00
0.00, 0.00,
0.00,
-1.00
0.00,
0.00, 0.00,
-1.00
0.00,
0.00,
-1.00 0.00,
-1.00
0.00,
0.00, 0.00,
0.00,
0.00,
-1.00 -1.00 -1.00
0.00,
0.00,
0.00,
-1.00
0.00, 0.00,
-1.00
-1.00
0.00,
0.00, -1.00
0.00,
0.00,
-1.000.00,
0.00,
-1.00 0.00,
-1.00
0.00, -1.00
0.00,
0.00, 0.00,
0.00,
-1.00 0.00,
0.00,
-1.00 0.00,
-1.00 -1.00
0.00, 0.00, -1.00
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00, 0.00,
-1.00 0.00,
-1.00
-1.00
0.00, 0.00,
-1.00
-1.00
0.00,-1.000.00,
0.00,
0.00, 0.00,
0.00,
0.00,
-1.00
0.00, -1.00
-1.00
0.00,
-1.00 0.00,
-1.00
0.00, 0.00,
0.00,
0.00,0.00, 0.00,
-1.00
0.00,
-1.00 -1.00
-1.00
0.00, 0.00,
0.00, 0.00,
0.00,
-1.00
0.00, 0.00,
0.00,
-1.00
0.00,
0.00, 0.00,
-1.00
0.00,
0.00,
-1.00 -1.00
0.00,
0.00,
-1.000.00,
0.00,
0.00,
-1.00 0.00,
0.00,
-1.00
0.00,
0.00, 0.00,
-1.00
-1.00
0.00,
0.00, -1.00
0.00,
0.00,
-1.00 0.00,
0.00,
-1.00 0.00,
0.00,
-1.00
0.00, 0.00,
-1.00
0.00, -1.00
-1.00
0.00, 0.00,
0.00, -1.00
0.00,
0.00, 0.00,
0.00,
-1.000.00,
0.00,
-1.00
0.00, 0.00,
0.00,
-1.00
0.00,
0.00, 0.00,
0.00,
-1.00
0.00,
0.00,
-1.00 -1.00
0.00,
0.00,
0.00,
0.00,
-1.00 -1.00
0.00,
0.00,
-1.00
0.00, 0.00,
0.00,
-1.00
-1.00 0.00,
-1.00
0.00, -1.00
0.00, -1.00
0.00, 0.00, -5.000.00,
0.00,
0.00,
0.00, 0.00,
-1.00
0.00,
0.00, -1.00
0.00,
0.00,
-1.000.00,
0.00,
-1.000.00,
0.00,
-1.000.00,
0.00,
0.00,
-1.00
0.00, 0.00,
0.00,
-1.00
0.00,
0.00,
0.00, 0.00,
-1.00
-1.00
0.00,
0.00,
-1.00 -1.00
0.00,
-1.00 -1.00
0.00, 0.00,
0.00,0.00,-5.00
0.00,0.00,-5.00 -5.00 0.00, 0.00,
0.00, 0.00,
0.00,
-1.000.00,
-1.00
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
-1.00 -1.00
0.00,
0.00, 0.00,
0.00,
0.00,
-1.00 -1.00 -1.00
0.00,
-1.00
0.00, -1.00
-1.00
0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
-5.00
0.00,
0.00,
-5.00
-5.00
0.00,
0.00,
-5.00
0.00, -5.00
0.00, -5.00
0.00, -5.00 0.00, 0.00,
0.00,
0.00, 0.00,
-1.00
0.00,
0.00, -1.00
0.00,
0.00,
-1.000.00,
0.00,
-1.00 0.00,
0.00,
-1.00 -1.00
0.00, -1.00
0.00, 0.00, 0.00,
-5.00
0.00,
0.00,
0.00,
-5.00
0.00, 0.00,0.00,
-5.00
0.00,
-5.00
-5.00
0.00,
0.00,
-5.00 0.00,
0.00,-5.00
0.00,-5.00
-5.00 0.00, 0.00,
0.00,0.00,
0.00,
-1.00
0.00, 0.00,
0.00,
-1.00
0.00,
0.00, 0.00,
-1.00
0.00,
-1.00 -1.00
-1.00
0.00, 0.00,
0.00,
0.00,
0.00,
-5.00
0.00,
0.00,
-5.00
0.00,
0.00,
-5.00
0.00,
0.00,
0.00,-5.00 0.00,
0.00,
0.00,-5.00 0.00,
-5.00
0.00,
0.00,
-5.00 0.00,-5.00
0.00,
-5.00 0.00,
-5.00
0.00, -5.00
0.00,
0.00,
-5.00
0.00,
0.00, -1.00
0.00,
0.00, 0.00,
-1.00 -1.00
0.00, 0.00,
0.00, -5.00
0.00,
0.00, 0.00,
0.00,
-5.00 0.00,
-5.000.00,-5.000.00,
0.00, 0.00,
0.00,
-5.00 0.00,
-5.00
0.00, -5.00
0.00, 0.00, 0.00, -1.00
0.00, 0.00,
0.00, -5.00
0.00,
0.00, 0.00,
0.00,
-5.00 0.00,
0.00,
-5.00 0.00,
0.00,-5.000.00,
0.00,-5.00
0.00,
0.00,
-5.00 0.00,
-5.00
0.00, -5.00 -5.00
0.00,
0.00, 0.00,
0.00, 0.00,
0.00,
-5.00 0.00,
0.00,-5.000.00,
0.00,-5.000.00,
0.00,
-5.00 0.00,
0.00,-5.00 -5.00-5.00
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,-5.00
0.00,
0.00, 0.00, -5.00
0.00,
-5.00 0.00,
0.00,
-5.00 0.00,
-5.00
0.00, -5.00-5.00
0.00,
0.00, 0.00,
0.00, 0.00,
0.00,
-5.00 0.00,
-5.00
0.00, -5.00 -5.00
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
-5.00
0.00, -5.00-5.00-5.00
0.00, 0.00, -5.00
0.00, 0.00,
0.00, -5.00
0.00, -5.00
0.00, 0.00,
0.00, 0.00,-5.00
0.00, 0.00,
-5.00 -5.00
0.00,0.00, -5.00
0.00,
0.00, 0.00,
0.00,
-5.00 0.00,
-5.00 -5.00
0.00,0.00, -5.00
0.00, 0.00,
0.00,
-5.00 0.00,
0.00,
-5.00 0.00,
-5.00
0.00, -5.00
0.00, -5.00
0.00, 0.00, -5.00
0.00, 0.00,
0.00, 0.00,
0.00,
-5.00 0.00,
-5.00
0.00, -5.00
0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00
0.00, 0.00,-5.00
0.00, 0.00,
0.00,
-5.00 0.00,
0.00,-5.00 -5.00
0.00,
0.00, 0.00,
0.00,
-5.00 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
0.00,-5.00 -5.00
0.00,
0.00, 0.00,
0.00,
-5.00 0.00,
0.00,-5.00 -5.00
0.00, 0.00,
0.00,
-5.00 0.00,
0.00,
-5.00 0.00,
-5.00 -5.00
0.00,0.00,
0.00, 0.00,
-5.00
0.00, -5.00
0.00,
0.00, 0.00,
-5.00 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
0.00,
-5.00 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,-5.00
0.00, 0.00,
0.00,
-5.00 0.00,
0.00,
-5.00
0.00,0.00,
-5.00 -5.00
0.00, 0.00,
0.00,
-5.00 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
0.00,
-5.00 0.00,
0.00,-5.00 -5.00
0.00, 0.00,
0.00,
-5.00 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, -5.00
0.00,
0.00, 0.00, 0.00,
-5.00
0.00, -5.000.00,
0.00, -5.00 -5.00
0.00, 0.00,
0.00, -5.00
0.00,
0.00,0.00,
-5.000.00,
0.00, -5.00-5.00
0.00, 0.00, -5.00
0.00, 0.00, -5.00
0.00, 0.00, -5.00
0.00,0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00,0.00,
0.00,
-5.00
0.00,
0.00,
-5.00
0.00,
0.00,
-5.00
0.00,
-5.00 -5.00
0.00, 0.00, 0.00,
-5.00
0.00, -5.00
0.00,
0.00, 0.00,
0.00,
-5.00 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00
0.00, -5.00
0.00, 0.00,
0.00,
-5.00 0.00,
0.00,
-5.000.00,
-5.00-5.00
0.00,
0.00,
0.00, 0.00,
0.00, 0.00,
-5.00
0.00, -5.00
0.00,
0.00,
-5.00
0.00,
0.00,
-5.00
0.00, -5.000.00,
0.00,
0.00,-5.00 -5.00
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00 0.00,
-5.00
0.00, -5.00
0.00,
0.00, 0.00,
0.00,
-5.00 0.00,
-5.00-5.00
0.00, 0.00,
0.00, 0.00,
0.00,
-5.00 0.00,
0.00,-5.00 -5.00
0.00,
0.00, 0.00,
0.00,
-5.00 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00-5.00
0.00, 0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
0.00,
-5.00 0.00,
-5.00
0.00, -5.00
0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00, -5.00
0.00,0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00 -5.00
0.00,0.00,
0.00, 0.00,
-5.00
0.00,
-5.00
0.00,
0.00, 0.00,
-5.000.00,
0.00, -5.00 -5.00
0.00, 0.00, -5.00
0.00,
0.00, 0.00, -12.00
0.00,0.00,
0.00,0.00, -12.00
-12.00
0.00, 0.00,
0.00,
0.00,0.00,
0.00,
-5.00
0.00,
0.00,
0.00,
-5.00 -5.000.00,
0.00,
-5.00 -5.00-5.00
0.00, 0.00,
0.00,
0.00,
0.00,
-12.00
0.00,
0.00,-12.00
0.00,
-12.00
-12.00 0.00, 0.00, 0.00,
0.00,
0.00,
-5.00 0.00,0.00,
-5.00 -5.00 -5.00
0.00, 0.00,
0.00, -12.00
0.00, -12.00 0.00, 0.00,
0.00,
0.00, 0.00,0.00,
-5.00 -5.00 -5.00
0.00, 0.00,
0.00, 0.00,0.00,
-12.00 -12.00
0.00,
0.00, -12.00
0.00,
0.00,-12.000.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00 -5.00
0.00,0.00,
0.00, 0.00, 0.00,
-12.00
0.00,
0.00, 0.00,
-12.00
0.00,-12.00
0.00,0.00,
-12.00
0.00,
0.00, -12.00
0.00,0.00,
-12.00 -12.000.00,
0.00, 0.00,
-5.00
0.00,-5.00
0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
0.00,
0.00,
-12.00 -12.00
0.00,
0.00,
0.00, 0.00,
-12.00
0.00, 0.00,
-12.00
0.00,
0.00,
-12.00
0.00, 0.00,
0.00,
-12.00
0.00, -5.00
-12.00
0.00, 0.00,
0.00,
-12.00 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00,-12.000.00,
0.00, 0.00,
-12.00
0.00, 0.00,
-12.00
0.00,
0.00, 0.00,
0.00,
0.00,
-12.00
0.00, 0.00,
-12.00
-5.00 -5.00
0.00,
0.00, 0.00,
0.00,
-12.00 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
0.00,-12.00
0.00,
0.00, -12.00
0.00,
0.00,
-12.00 -12.00
0.00,
0.00, 0.00,
-12.00
0.00,
0.00, 0.00,
0.00,
0.00,
-12.00 -12.00
0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00
0.00,-5.00
0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-12.00
0.00, 0.00,
-12.00
0.00,
0.00,
0.00,
0.00,
-12.00
0.00, 0.00,
-12.00
0.00,
0.00,
0.00,
-12.00
0.00, 0.00,
-12.00
0.00,
0.00,
0.00,
-12.00-5.000.00,
0.00,
-12.00
0.00, 0.00,
-12.00
-5.00
0.00,-5.00
0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00 -5.00
0.00,
0.00, 0.00, 0.00,
-12.00
0.00, -12.00
0.00,
0.00, 0.00,
-12.00
0.00,
0.00, 0.00,
0.00, 0.00,
-5.00
0.00, 0.00,
-12.00 0.00,
-12.00 -5.000.00,
-12.00
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00 -5.00
0.00,0.00,
0.00,
0.00,0.00,
0.00,
-12.00
0.00,-12.00
0.00, 0.00,
0.00,
-12.00
0.00, 0.00,
-12.00
0.00,
0.00,
-12.00 0.00,
0.00,
-12.00
0.00, -5.00
0.00, 0.00,
-12.00 0.00,
-5.00
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, -5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, -12.00
0.00,
0.00, 0.00,
-12.00
0.00, 0.00,
-12.00 0.00,
0.00,-12.000.00, 0.00, -5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00
0.00,-5.00
0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00, 0.00, -5.00
0.00, 0.00,
0.00,0.00, -12.00
0.00,0.00,
0.00,
0.00, 0.00,
0.00,-12.00
-12.00
0.00, 0.00, 0.00,
-12.00
-12.00
0.00, 0.00, 0.00, 0.00,
-12.00 0.00,
0.00,
0.00,-12.00
-12.00
0.00,
-5.00
0.00,0.00,
-5.00
0.00, -5.00
0.00,
-5.00
0.00,
-5.00
0.00,
0.00, 0.00,
0.00, 0.00,-5.00
0.00, 0.00,
-5.00
-5.00
0.00,
-5.00 -5.000.00,
0.00, 0.00, -5.00 -5.00
0.00, 0.00, -5.00
0.00, 0.00,
0.00, 0.00,
0.00, -12.00
-12.00
0.00, -12.00 0.00, 0.00,0.00,
0.00, 0.00,
-5.000.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
0.00,
-5.000.00,
-5.00 -5.00
0.00, 0.00,
0.00, -12.00
0.00, -12.00 0.00,0.00,
0.00,0.00, 0.00,
-5.000.00,
-5.00
0.00,
-5.00
0.00, 0.00,
0.00, 0.00,
-5.00
0.00,0.00,
0.00,
0.00,
-5.00
0.00,
-5.00
-5.00
0.00,0.00,
0.00, 0.00,0.00,
-5.000.00,
-5.000.00,
-5.00
0.00,
0.00,
-5.00
0.00, -5.00
0.00, -5.00
0.00,0.00,
0.00, -5.00-5.00
0.00, 0.00,
-5.000.00,
0.00, -5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00 -5.00
0.00, 0.00, -5.00
0.00, 0.00,
0.00, 0.00,
-5.00
0.00, 0.00,0.00,
0.00, 0.00,
-5.000.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
0.00,
-5.00 0.00,
-5.00
0.00,
-5.00
0.00,
0.00, 0.00,
-5.00-5.00
0.00,0.00,
0.00, 0.00, 0.00,
-5.00 0.00,
-5.00
0.00,
-5.00
0.00,
0.00,
0.00,
0.00,
-5.00
0.00,
-5.00
0.00,
-5.00
0.00,
0.00,0.00,
0.00,
-5.00 0.00,
-5.00-5.00
0.00, 0.00,
0.00, 0.00,
-5.00-5.000.00, 0.00, -5.00
0.00, 0.00,
-5.00-5.00
0.00,0.00,
0.00, 0.00, 0.00,
-5.000.00,
-5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00
0.00,0.00,
0.00,0.00, -5.000.00,
0.00, -5.00 -5.00
0.00, 0.00,
0.00, 0.00,
-5.00-5.00
0.00,0.00,
0.00,0.00, 0.00,
-5.00 0.00,
-5.00 -5.00
0.00, 0.00, -5.00
0.00,0.00,
0.00,0.00, -5.000.00,
0.00, -5.00 -5.00
0.00,0.00,
0.00,0.00, -5.000.00,
0.00, -5.00 -5.00
0.00,0.00,
0.00,0.00,
-5.00-5.00
0.00, 0.00, -5.00
LIVE LOAD ON
OTHER FLOORS AND
BASE - 5 kPa
0.00,0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,0.00,
0.00,
0.00,
0.00,
0.00,
-17.61
0.00,
0.00,
-17.61
0.00,
-17.61
0.00,
-17.61
0.00,
0.00,
0.00,
-17.61
0.00,
0.00,
-17.61
-17.61
-17.61
0.00, -17.61
-17.61
0.00,
-17.61 -17.61
kPa
0.00,0.00,
0.00,0.00,
0.00, 0.00,
0.00,
-17.61-17.61 0.00,
0.00,
-17.61 -17.61
0.00, -12.81
0.00, 0.00,
0.00, 0.00,
-17.61 0.00,
-17.61 0.00,
0.00, -17.61
0.00,
0.00, -12.81
0.00, -12.81
0.00,0.00, 0.00,
0.00,0.00,
-17.61
0.00, 0.00,
0.00,
-17.61 0.00,
0.00,
-17.610.00,
-17.61
0.00, -12.81
0.00,
0.00, -12.81
0.00, -12.81
0.00,0.00,
0.00, -17.61
0.00, 0.00,
0.00,
-17.61 0.00,
-17.61
0.00, -17.61
0.00,
0.00, 0.00,
-12.81
0.00, -12.81
0.00,
0.00, -12.81
0.00, -12.81
0.00, 0.00,
0.00, 0.00,0.00,
-17.61
0.00, 0.00,0.00,
-17.61 -17.61
0.00, 0.00,
-17.61 -12.81
0.00, 0.00,
0.00,0.00,
0.00,
-12.81 -12.81
0.00, -12.81
0.00, 0.00,
0.00, 0.00,
-17.61
0.00, 0.00,
0.00,
-17.61 -17.61
0.00,
0.00, -17.61
0.00,
0.00, 0.00,
-12.81
0.00, -12.81
0.00,
0.00, 0.00,
0.00,
-12.81 0.00,
-12.81 -12.81
0.00,0.00,
0.00, 0.00,
-17.61
0.00,
0.00, 0.00,
0.00,
-17.61
0.00, -17.61
0.00,
0.00,
-17.61 -17.61
0.00,
0.00, -12.81
0.00,
0.00, 0.00,
0.00,
-12.81 0.00,
0.00,
-12.81 0.00,
0.00,
-12.81 -12.81
0.00, -12.81
0.00,0.00,
0.00, 0.00,
-17.61
0.00, 0.00,
0.00,
-17.61 -17.61
0.00,
0.00, -12.81
0.00, -12.81 0.00, 0.00,
0.00, -12.81
0.00,
0.00, -12.81
0.00, -12.81
0.00,
0.00,0.00,
0.00, 0.00,
0.00,
-17.61 -17.61
0.00,
0.00, 0.00,
-12.81
0.00, 0.00,
0.00,
-12.81 0.00,
-12.81
0.00, -12.81
0.00,
0.00, 0.00,
-12.81
0.00, -12.81
0.00,
0.00, -12.81
0.00, -12.81
0.00, -17.61
0.00,-17.61
0.00,
0.00, 0.00,
-12.81
0.00, 0.00,
0.00,
-12.81 -12.81
0.00,
0.00, 0.00,
-12.81 -12.81
0.00, 0.00,
0.00,0.00,
0.00,
-12.81 -12.81
0.00, -12.81
0.00,0.00,
0.00, 0.00,
0.00, 0.00,
-12.81
0.00, 0.00,
0.00,
-12.81 -12.81
0.00,
0.00, -12.81
0.00,
0.00, -12.81
0.00,
0.00, 0.00,
-12.81 0.00,
-12.81 0.00, -12.81
0.00,0.00,
0.00, 0.00,-12.81
-12.81
0.00, 0.00,
0.00, -12.81
0.00,
0.00, -12.81
0.00,-12.81
-12.81 0.00, 0.00,
0.00,0.00,
-12.81
0.00, -12.81
0.00, -12.81
0.00, 0.00, -12.81
0.00,-12.81
0.00, 0.00,
-12.81 0.00,
0.00, 0.00,
-12.81 -12.81
0.00, 0.00,
0.00, 0.00,
-12.81 -12.81
0.00,0.00,
0.00,0.00,
-12.81 0.00,
0.00,-12.81
0.00,
0.00,
0.00,
0.00,
0.00,
-12.81
0.00,
0.00, 0.00,
-12.81
0.00,
-12.81
0.00,
0.00,
0.00,
-12.81
-12.81
-12.81
0.00,
0.00, -12.810.00,0.00,
0.00,0.00,
0.00,
-12.81-12.81
0.00,
0.00,
0.00,
-12.81
0.00,
-12.81
0.00,
-12.81
-12.81
0.00,0.00,
0.00,0.00,
0.00, -12.81
0.00, 0.00,
0.00,
-12.81 0.00,
0.00, -12.81
0.00,
-12.81
0.00, 0.00,
-12.81
0.00, -12.81
0.00, 0.00,
-12.81 0.00, -12.81
0.00,0.00,
0.00, 0.00,
-12.81
0.00, 0.00,
0.00,
-12.81 -12.81
0.00,
0.00, -12.81
0.00, -12.81 0.00, 0.00,
0.00, -12.81
0.00,
0.00, -12.81
0.00, -12.81
0.00,
0.00,0.00,
0.00, 0.00,
0.00,
-12.81 0.00,
-12.81
0.00,
0.00, 0.00,
-12.81
0.00,
0.00, 0.00,
0.00,
-12.81
-12.81
0.00, 0.00,
-12.81
0.00,
-12.81 -12.81
0.00,
0.00, 0.00,
-12.81
0.00, -12.81
0.00,
0.00, -12.81
0.00, -12.81
0.00, -12.81
0.00,0.00,
0.00, 0.00,
-12.81
0.00, 0.00,
-12.81 0.00,
0.00,
-12.81 -12.81
0.00,
0.00, -12.81
0.00,
0.00, 0.00,
-12.81
0.00, -12.81
0.00, -12.81
0.00,0.00,
0.00, -12.81
0.00, 0.00,
-12.81
0.00,-12.81
0.00, 0.00,
0.00,
0.00,
-12.81 -12.81
0.00,
0.00, -12.81
0.00,
-12.81
0.00, 0.00,
-12.81 -12.81 0.00, 0.00, -12.81
0.00,0.00,
0.00, 0.00, 0.00,
0.00,
0.00, -12.81 -12.81
0.00,
0.00, -12.81
0.00, 0.00,
-12.81 0.00,
0.00, 0.00,
-12.81
0.00, -12.81
0.00,
0.00, -12.81
0.00, -12.81
0.00,-12.81
0.00,0.00,
0.00, 0.00,00.00,
0.00, 0.00,
-12.81
.00, 0.00,
-12.81
0.00,
0.00, 0.00,
0.00,
-12.81
-12.81
0.00, 0.00,
-12.81
0.00,
-12.81 -12.81
0.00,
0.00, -12.81
0.00,
0.00, -12.81
0.00, -12.81
0.00,
0.00, -12.81
0.00,
0.00, 0.00,
-12.81
0.00, 0.00,
-12.81 0.00,
0.00,
-12.81 -12.81
0.00,
0.00, 0.00,
-12.81
0.00, -12.81
0.00, -12.81
0.00,0.00,
0.00, -12.81
0.00,
0.00, 0.00,
-12.81
0.00, 0.00,
0.00,
0.00,
-12.81 -12.81
0.00,
0.00, -12.81
0.00,
0.00,
-12.81 -12.81
0.00,
0.00, -12.81-12.81
0.00,
0.00,0.00,
0.00, 0.00,
-12.81
0.00, 0.00,
0.00,
-12.81 -12.81
0.00,
0.00, -12.81
0.00, -12.81
0.00, -12.81
0.00,
0.00,0.00,
0.00, 0.00,
-12.81 0.00,
-12.81
0.00,-12.81 0.00,
0.00,0.00,
0.00, -12.81
0.00, 0.00,
-12.81
-12.81
0.00, 0.00,
-12.81 -12.81
0.00,
0.00, 0.00,
0.00, 0.00,
-12.81
0.00,
0.00, 0.00,
-12.81
0.00, -12.81
0.00,
-12.81 -12.81
0.00, 0.00, -12.81
0.00,0.00,
0.00,0.00,
-12.81
0.00, 0.00,-12.81
0.00,
-12.81 0.00,-12.81
0.00, -12.81
0.00,0.00,
0.00, -12.81
0.00, 0.00,
0.00,
-12.81 0.00, -12.81
0.00,
0.00,0.00,
0.00, 0.00,
0.00,
-12.81 -12.81
0.00, -12.81
0.00,
0.00, -12.81
0.00, -12.81
0.00,0.00,
0.00,0.00,
-12.81-12.81
0.00, 0.00, -12.81
LOAD ON MACHINE
ROOM SLAB - 12 kPa
0.00, 0.00,
0.00, 0.00,
0.00,
0.00,
0.00, -12.00
-12.00
0.00, -12.00
-12.00
0.00, 0.00,
0.00,
0.00,
0.00, 0.00,
0.00, 0.00,
-12.00
0.00,
0.00,
0.00,
0.00, 0.00,
0.00,-12.00
-12.00
0.00,
0.00,
-12.00 -12.00
-12.00-12.00
-12.00
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,0.00, 0.00,
0.00,-12.00
0.00,
-12.000.00, -12.00
-12.00
0.00, 0.00,
0.00,
0.00,
-12.00
0.00,
0.00,
0.00, 0.00,
0.00,
-12.00
0.00,
0.00,
-12.00 -12.00
-12.00 -12.00
-12.00
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00, 0.00,
0.00,0.00,
0.00,
0.00, -12.00
-12.00
0.00, 0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
-12.00
0.00,
-12.00
-12.00
0.00, 0.00,
0.00, 0.00,
-12.00
0.00,
-12.00
-12.00
0.00,
0.00,0.00, -12.00
-12.00
-12.000.00, 0.00,
0.00,
0.00,
-12.00
0.00, -12.00
0.00,
0.00, 0.00,
0.00,
-12.00
0.00,
-12.00
0.00,
0.00,
-12.00 -12.00
-12.00
0.00, -12.00
0.00,
-12.00
-12.00
0.00,
0.00,0.00,
0.00, 0.00,
0.00,
0.00,-12.00
0.00,
0.00,
0.00,0.00,
0.00,
-12.00
0.00,
-12.00
0.00, -12.00
0.00,
0.00, 0.00,
0.00,
0.00,
-12.00 0.00,
-12.00
0.00,
-12.00
0.00, 0.00,
0.00,0.00,
-12.00
-12.00 0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
-12.00
-12.00 0.00,
-12.00
0.00,
-12.00
-12.00
0.00, -12.00
-12.00
-12.00
0.00, 0.00,
0.00,0.00,
0.00, 0.00,
0.00,
0.00,0.00,
0.00, -12.00
0.00, 0.00,
0.00, 0.00,
0.00,
0.00,-12.00
-12.00
0.00, 0.00,
0.00,
0.00, -12.00
-12.00
-12.00 0.00,
0.00,0.00,
0.00, -12.00
-12.00
-12.00 0.00,
-12.00
0.00,
-12.00 -12.00
-12.00
0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,-12.00
0.00, 0.00,
-12.00
0.00,
-12.00 -12.00
-12.00
0.00, 0.00, -12.00
SOIL LOAD ON
BASEMENT WALLS
25.30
25.30
25.30
25.30
31.61
31.61
31.61
25.30
31.61
25.30
31.61
35.57
25.30
31.61
31.61
35.57
31.61
25.30
31.61
35.57
31.61
25.30
35.57
35.57
- EAST AND SOUTH
31.61
35.57
40.39
35.57
31.61
25.30
31.61
35.57
40.39
25.30
25.30
35.57
25.30
31.61
40.39
31.61
25.30
35.57
31.61
40.39
31.61
35.57
40.39
31.61
35.57
45.21
31.61
35.57
40.39
31.61
40.39
25.30
35.57
45.21
35.57
31.61
40.39
40.39
45.21
35.57
31.61
40.39
45.21
35.57
40.39
45.21
40.39
40.39
45.21
45.21
35.57
25.30
50.03
35.57
31.61
31.61
31.61
40.39
50.03
45.21
40.39
35.57
45.21
40.39
50.03
35.57
31.61
40.39
35.57
45.21
50.03
FACE
31.61
25.3040.39
45.21
35.57
31.61
35.5750.03
40.39
35.57
45.21
45.21
50.03
40.3954.85
50.03
45.21
54.85
25.30
31.61
35.57
40.39
30.34 50.03
35.57
25.30
54.85
40.39
45.21
50.03
45.21
54.85
45.21
50.03
40.39
31.61
35.57 54.85
50.03
45.21
59.67
30.34
40.39
35.57
30.34
25.30 45.21
50.03
50.03
35.57
40.39
30.34
35.57
54.85
54.85
40.39
45.21
50.03
59.67
54.85
59.67
54.85
25.30
33.50
25.30
30.3445.21
30.34
35.5750.03
45.21
50.03
40.39
40.39
45.21
40.39
33.50
40.39
59.67
54.85
50.03
54.85
50.03
59.67
59.67
45.2164.61
54.85
50.03
30.34
25.30
25.30
30.34
50.03
45.21
33.50
30.34 54.85
59.67
45.21
40.39
40.39
50.03
33.50
37.35
64.61
54.85
59.67
59.67
45.21
50.03
59.67
54.85
64.61
25.30 45.21
30.34
33.50
30.34 54.85
40.39
45.21
37.35 59.67
50.03
54.85
64.61
54.85
50.0369.56
59.67
59.67
54.85
64.61
30.34
25.30
30.34 50.03
50.03
33.50
37.35
45.21
54.85
45.21
33.50
30.34
69.56
59.67
64.61
50.0369.56
64.61
54.85
59.67
54.85
64.61
69.56
33.50
30.34
25.30
25.30
30.3441.20
37.35
33.50
30.34
33.5050.03
37.35 59.67
45.21
50.03
41.20 64.61
74.51
59.67
54.85
64.61
69.56
59.67
54.85
59.67
41.20
50.0369.56
54.85
54.85
64.61
74.51
30.34
33.50
33.50
25.3037.35
30.34
33.50
37.35 59.67
41.20
54.85
50.0364.61
59.67
69.56
69.56
74.51
59.67
64.61
45.05
41.20 69.56
54.85
54.85
64.61
69.56
79.46
25.30
30.34
25.3037.35
33.50
41.20
30.34
33.5050.03
37.35
37.35
41.20
30.34
37.35
64.61
59.67
45.05
54.8574.51
69.56
74.51
59.67
64.61
69.56
64.61
74.51
59.67
59.67
54.8574.51
64.61
74.51
30.34
33.50
25.30
30.3441.20
45.05
37.35
41.20
30.34
33.50 59.67
69.56
48.90
45.05
37.35
69.56
59.67
41.2059.6779.46
64.61
54.85
37.35 64.61
74.51
69.56
74.51
79.46
64.61
54.85
69.56
74.51
74.51
33.50
30.34
25.30
25.30
30.3441.20
33.50
30.34
37.35
33.50
37.35 59.67
45.05
41.20 64.61
69.56
69.56
48.90
41.20
79.46
64.61
64.61
59.67
48.90 74.51
79.46
64.61
74.51
69.56
33.50
41.20
30.34
33.50
25.30 45.05
37.35
41.20
45.05
37.35
45.05
33.50
30.34
69.56
59.67
59.67
48.90
41.20
45.05
79.46
64.61
64.61
52.75
74.51
69.56
74.51
79.46
69.56
64.61
74.51
74.51
30.34
33.50
37.35
25.3041.20
30.34 48.90
37.35
45.05
37.35
41.20
45.05
33.50 69.56
69.56
52.75
48.90
79.46
64.61
74.51
69.56
79.46
64.61
69.56
74.51
74.51
30.34
25.3037.35
25.30 41.20
30.3445.05
48.90
37.35
30.34 45.05
37.35
33.50
41.20
45.0569.56
48.90
52.75
41.20 79.46
74.51
69.56
64.61
48.90 79.46
74.51
74.51
69.56
33.50
37.35
41.20
30.34
33.50
33.50
30.34 48.90
52.75
45.05
41.20
30.34 48.90
37.35 79.46
74.51
74.51
69.56
48.90 74.51
79.46
74.51
25.30
33.50
25.30 41.20
30.34
33.50 48.90
45.05
37.35
30.34 52.75
41.20
41.20
33.50
45.05
48.90
74.51
52.7579.46
69.56
48.9074.51
79.46
33.50
37.35
41.20
30.34
25.3037.35
41.20
48.90
37.35
33.50
30.34 52.75
45.05
48.90
41.20
45.05 74.51
79.46
74.51
52.75
48.90 79.46
25.30
33.50
37.35
30.34 45.05
33.5048.90
37.35
41.20
45.05
37.35
48.90
52.75
74.51
30.34
25.3037.35
33.50
30.34
25.30 41.20
45.05
52.75
41.20
45.05
48.90
37.35
41.20
33.5045.05
48.90 79.46
30.34
33.50
37.35
41.20
45.05
30.34
33.5048.90
41.20
33.5048.90
45.05
37.3552.75
45.05
48.90
25.30
30.34
25.30 41.20
41.20
37.35
33.5048.90
45.05
41.20
30.3445.05
33.50
37.3552.75
48.90
33.50
30.34
41.20
30.3445.05
37.35
37.35
33.50
25.30
30.34 52.75
48.90
41.20
45.05
37.35
48.90
33.50
25.30 45.05
41.20
30.34
33.5048.90
37.35
45.05
33.5048.90
37.3552.75
41.20
30.34
37.35
45.05
33.50
25.30 48.90
41.20
37.35
30.3441.20
45.05
33.5048.90
45.05
52.75
25.3037.35
30.3441.20
33.50
30.34 45.05
33.50
37.3552.75
41.20
48.90
37.35
45.05
30.34
33.50
25.30
30.3441.20
48.90
37.35
41.20
45.05
41.20
33.5045.05
52.75
48.90
48.90
30.34
25.3037.35
30.34
33.50
30.34 45.05
33.50
41.20
48.90
37.35
37.35
45.05
41.20
48.90
25.30
25.30
25.30
25.30
25.30 25.30 37.35
30.3441.20
33.5045.05
52.75
45.05
48.90
41.20
48.90
37.3552.75
45.05
25.30
25.30
25.30
25.30 25.30
30.34
33.50
30.3441.20
30.34
37.35
33.50 48.90
45.05
41.20
37.35
33.5048.90
45.05
41.20
52.75
30.34
30.34
30.3430.34
30.3430.34 25.30
25.30
25.30
25.30
25.3037.35
30.34
25.30
33.50 48.90
45.05
41.20
52.75
48.90
45.05
37.35
30.34
33.50 48.90
41.20
30.34
30.34 30.34
30.34
30.34
30.34 30.34
30.3430.34
30.34 30.34 30.34
33.50
37.35
30.34
33.5045.05
41.20
41.20
48.90
52.75
45.05
45.05
48.90
37.35
41.20
48.90
52.75
33.50
33.50
33.50
33.5033.50
33.50
33.50
33.50
33.50 30.34
30.34
30.34 30.34
30.34
30.34 30.34
30.3433.50
30.34
33.50 45.05
37.3548.90
41.20
45.05
33.50
33.50
33.50 33.50
33.5033.50
33.50 30.34
30.34
33.50 30.34
33.50
37.35
30.3441.20
37.35
33.50
37.3548.90
45.05
41.20
52.75
45.05
48.90
41.20
48.90
52.75
37.35
37.35
37.35
37.35 33.50
33.50
33.5033.50
33.50
33.50
33.50 33.50
33.50
33.50 45.05
48.90
41.20
37.35
45.05
37.35
37.35
37.35
37.3537.35
37.3537.35
37.35 37.35
37.35 33.50
33.50
37.35
37.35
41.20
33.50 52.75
48.90
41.20
45.05
45.05
48.90
37.3548.90
41.2052.75
41.20
41.20
41.20 37.35
37.3537.35
37.3537.35
37.3537.35
37.35
37.35 45.05
37.35
41.20
37.35
37.35 48.90
45.05
41.2041.20
41.20
41.20
41.20 41.20
41.2041.20
41.20 41.20 37.35
37.35
37.35
37.35 48.90
41.2052.75
45.05
41.20
45.05
48.90
48.90
41.2052.75
45.05 41.20
41.20
41.20 41.20
41.2041.20
41.2041.20 45.05
48.90
45.05
41.20
41.20
45.05
45.05
45.0545.05
45.05
45.05
45.05 45.05
45.0545.05
45.05
41.2041.20
41.20
41.20
41.2048.90
41.2052.75
45.05
45.05
52.75
48.90
41.20
48.90
45.05
45.05
45.05
45.05
45.05 45.05
45.0545.05
45.05 48.90
48.90
48.90
48.90
48.90
48.9048.90
48.90 45.05
48.90
48.90
45.05
45.05
45.0545.05
52.75
48.90
45.05
48.90
45.05
45.05
45.05
48.90
52.75
48.90
48.90
48.90 48.90
48.90
48.90
48.90 45.05
48.90
48.90
48.90 48.90
52.75
52.75
52.75
52.75
52.75 48.90 48.90
48.90
48.90
48.9048.90
48.9052.75
48.90
52.75
52.75
52.75
52.75
52.75 48.90
52.75
52.75
48.90
48.90
52.75
52.75
52.75
52.75
0.00, 0.00,0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
0.00, 0.00,
1.50
0.00,
0.00,
0.00,
1.50 1.50
0.00,
0.00,
1.501.50
0.00,
1.501.50
0.00,
1.501.501.50
0.00,
0.00, 0.00,
0.00,
0.00, 0.00,
0.00,0.00,
0.00,
0.00,
0.00, 1.50
0.00, 0.00,
0.00, 0.00,
0.00,
1.50
0.00,
0.85, 0.00,
1.50
0.00, 0.00,
1.11,
0.85,
0.00,
0.85,
1.50 0.00,
0.85,
0.00,
1.501.50
1.11,
0.00,
0.00,
0.001.50 0.00,
0.00,
1.500.00
0.00,
0.00
0.00,
0.00, 1.50
0.00,
0.00,
0.00,
1.11,
0.00 0.00,
1.500.00,1.50
0.00
0.00,
0.00,
1.50 0.00,
0.00
0.00,
1.501.50
0.001.50
1.50
1.50
0.00, 1.50
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00,
0.85, 1.50
0.00,
0.00,
0.85,
0.00,
0.00, 0.00,
0.00,0.00,
0.85,
1.50
0.00, 1.50
0.00
0.00,
0.00 1.50 0.00,
0.00,
0.00
0.00,
0.00,1.50
0.00,1.50
0.00,
1.50 0.00,
0.00,
1.50
0.00,
0.00,
0.00,1.500.00,
1.11,
0.00,
0.00,
1.50 0.00,
1.50 1.50
1.11,
0.00, 0.00,
0.00,
0.00,
0.00,
1.50 0.00,
0.00,
0.00,
1.50
1.11,
1.11, 1.50
0.00,
0.00,
0.00,
0.00, 0.00,
0.00
0.00,
1.50 1.50
0.00,
0.00, 1.50
0.00
0.00,0.00,
0.00,
1.50 1.50
1.50
0.00,
0.001.50
0.00 1.501.50
0.00,
-1.11,
-1.11, 0.00,
0.85,
0.00,0.00, 0.00,
0.00,
0.00
0.00,
0.00
0.00,
0.00, 0.00,
0.00,
0.00,
0.00 0.00,
1.50
0.00,
0.00,
0.00, 0.00,
0.00,0.00,
1.50
0.00, 1.50
0.00,
1.11,
0.00, 0.00,
0.00,
0.00,
1.501.50
0.00,
0.85,
0.00,
0.85,
1.50
0.00, 0.00,
0.00,0.00,
1.50
0.00,
0.00
0.00,
1.50
1.11, 0.00
0.00,1.50
1.50
0.00, 1.50
0.00
0.00, 0.00,
0.00,
1.50
1.11,
0.00,
0.00, 1.11,
0.00,
1.50
0.00 1.11,1.50
0.00,
0.00,
0.00,
1.500.00,
1.50 1.50
0.00
1.50
0.00, 0.00
0.00
-1.11,
-1.11, 0.00,
-1.11, 0.00,
0.00,
0.00,
0.00, 0.00,
0.00,
0.00
0.00,
0.85,
0.00, 0.00,
0.00,
0.85,
0.00
0.00, 0.00,
0.000.00,
0.85,
0.00, 1.50
0.00
0.00,
0.00 0.00, 0.00,
0.00,
0.00
1.11,
0.00,
0.00,
1.501.50
0.00,
1.11,
0.00,
1.50 0.00,
1.50
1.11, 1.50
0.00,
0.00,
1.50 0.00
1.50
0.00, 1.50
0.00,
0.00
0.00,0.00 1.25,
1.25, 0.000.00
0.00,
0.00, 0.00,
0.85, 0.85, 0.85,
0.00 0.00 0.00
0.00,
0.00, 0.00,
0.85,
1.11, 1.50
0.00,
0.00,0.00 0.00,
1.11,
0.00,
1.11, 0.00,
1.25,
0.00 1.25,
1.11, 1.25,
0.00, 0.00
0.00
0.00,0.000.00
0.00
0.00
-1.11,
-1.11, 0.00,
-1.11, 0.00, 0.00
0.00, 0.00
0.00, 0.00,0.00,
-1.11,
0.00
0.85, 0.85,
0.00,0.000.00,
0.85,
1.11,
0.00, 0.00
0.00
1.11,
1.25,
0.00, 1.11, 1.25,
0.00,
1.25,0.00,
0.000.000.00
0.00
0.00, 0.00
1.11,
0.001.11,
0.00,
0.00 0.00,
0.00,
1.25,0.000.00
0.00
-1.11,
0.00,0.00, 0.00,
-1.11,
0.85, 0.00,
0.85,0.85,
0.00,
0.00 0.00
0.00 0.00
0.00 1.11,
1.11,
1.11,
0.00, 0.00,
0.00,
0.00,
0.00, 0.00
1.25,
0.00,
1.25, 1.25,
0.00 0.00
0.00
0.00 0.00
0.00,
-1.11,
-1.11, 0.85,
0.00,
0.00, 0.00
0.00 0.00,
0.00 0.00,
0.00, 1.11,
0.85, 0.85,
0.85,
1.11,0.00,
0.00,
0.00
1.11,
0.00
0.00,
0.00
0.00,
1.25,
0.00, 1.11,
0.00
1.25,
0.001.11,
0.00
0.00 0.00,
0.00
1.11,0.00, 0.00
0.00,0.000.00
-1.11,
-1.11,
0.00, 0.00, 0.00,
0.00,
0.00,
0.85, 0.85, 0.85,
0.00
-1.11, 0.00,
0.00
0.00 0.000.00,
0.00
0.00,
1.25,1.25,
1.11,
0.00
1.11,0.00
1.11, 0.00
0.00,
0.00, 0.00
0.00,
0.00,
0.00, 0.00 1.25,
1.25,
0.00 0.000.00
0.00,
0.00,
-1.11, -1.11,
0.85,
0.00, 0.85, 0.00,
0.00
0.00 0.00 0.00,0.00
0.00,
1.11,0.85,
0.85,
1.11,0.00,
0.000.00
0.00,0.00,
0.00, 0.00,
1.11,
0.001.11,
1.25,
1.11,
0.00 1.25,
0.00,
1.25,0.00,
0.00
0.00, 0.00
0.00
0.000.00
0.00
-1.11, 0.00, 0.00, 0.00,
0.00 0.85, 0.85,
0.000.00
1.11,
0.00,
1.11, 0.00,
1.25,
0.00, 0.00
0.00
1.11,
0.00 0.00, 0.00
-1.11,
-1.11,
0.00, 0.00,
-1.11, 0.00,
0.00,
0.85, 0.00,
0.85,
0.00,0.00
0.85,
0.00-1.11,
0.00 0.00,
0.00
0.00,
0.000.00
0.00, 0.00,
1.11,0.85,1.25,
1.25, 1.11,
0.00
0.00, 0.00
1.11,
0.00 0.00
0.00,
1.11,
0.00 0.00,
0.00,
0.00,
0.00, 0.00
0.00, 1.25,
1.25,
0.00
1.25, 0.00
0.00 0.00
0.00
0.00,
-1.10, 0.85,
0.00, 0.00
0.00 0.00, 0.00, 0.85,
0.85, 1.11,
0.000.00
0.00,
1.11, 0.00,
0.00,
0.00, 0.001.25,
1.11,
1.25,
1.11,
0.00 0.00,0.000.00
0.000.00,
0.00, 0.00
-1.10,
-1.10, 0.00,
0.00, 0.00,
0.00, 0.00
0.85, 0.85,
0.00 0.000.00 1.11,
0.00, 1.11, 0.00,
1.25, 1.11,
0.00
0.00
0.00, 0.00,
0.00 1.25, 0.00
0.00
0.00,
0.00, -1.10,
0.00,
-1.10,
0.85,0.85, 0.00,
0.85,
0.000.00,
0.00 0.00
0.00
-1.11, 0.00,
0.00, 0.00,
1.11,
0.00 1.11, 1.25,
1.25,
0.00, 1.11,
0.000.00
0.00, 0.00
0.00 0.00,
0.00,
0.00,
1.11,
0.00 1.25,
0.00
1.25,
0.00, 0.00
0.00 0.00
-1.10,
-1.10, -1.10,
0.00, 0.00
-1.10,
0.00, 0.00,
0.00 0.00, 0.00
0.001.11,
0.00,
1.11, 0.00,
0.00, 1.11,
1.25,
0.00, 1.25,
0.00
1.11, 0.00,
0.00
1.11, 0.00
0.00,
0.00 0.00
0.00,0.00
0.00
-1.10,
-1.10, -1.10,
0.00,
0.00, 0.00
-1.10, 0.00,
0.00 0.00,
0.00,
1.11, 0.00
0.00, 1.11,
0.00
1.25,
0.00, 1.25,
1.11,
0.000.00,
1.11, 0.00
0.00,
0.00
0.00, 0.00
0.00,
0.00, 0.001.25,
1.25,
0.00 0.000.00
-1.10, -1.10,
-1.10,
0.00, 0.00,
0.00 -1.10,
0.00, 0.00,
0.00 0.00,
0.00 1.25,
1.11,
1.11, 0.00
0.00,0.00
0.00,
0.00,0.00,
1.11,
0.001.25,
0.00
1.11, 1.25,
0.00,0.00
0.00, 0.00
0.00
-1.10, -1.10,
0.00, 0.00
-1.10, 0.00,
0.00, 0.00 1.11,
0.00 0.00,
1.11, 0.00,
1.25,
0.00, 0.00
0.00
1.11,
0.00 0.00, 0.00
-1.10,
-1.10,
-1.10,
-1.10,
-1.10,
-1.10,
0.00,
-1.10,
0.00,
0.00,
0.00,
0.00
-1.10,
0.00,
0.00
-1.10,
0.00,
0.00,
0.00
-1.10,
0.00
-1.10,
0.00,
0.00
0.00,
1.11,
0.00,
0.00,
0.00
0.00
0.00,
0.00,
0.00,
0.00
0.00
0.00,
1.25,
1.25,
1.11,
1.11,
0.001.11,
0.00,0.00,
1.25,
1.11,
0.00
0.00, 0.00
0.00,
0.00,
1.11,
1.25,
1.11,
0.00
1.11,
0.000.00
0.00,
0.00
0.00,
0.00,
0.00,
0.00,
1.11,0.00,
1.11,
0.00
1.25,1.25,
0.00,0.00
0.00
0.00
1.11,
0.00
0.00,
0.00
0.00,
1.25,
1.25,
1.25,
0.00, 0.00
0.00,
0.00
0.00
0.00
0.00
0.00,
1.25,
0.00
0.00
0.00
0.00
0.00
WIND WARD FACE - 1.25 kPa
-1.10,
-1.10, -1.10,
0.00,
0.00, 0.00
-1.10, 0.00,
0.000.00,
1.11,
0.00, 0.00,
1.11, 0.00
1.25,
0.00,
1.25, 0.00
0.00,0.00
0.00 0.00
1.11, 0.00,
0.00,
1.11,
0.00 0.00, 1.25,
1.25,
0.00,0.00
0.000.00
-1.10, 0.00, 0.00
-1.10,
-1.10,
-1.10,
-1.10,
0.00,
-1.10,
-1.10,
-1.10,
0.00,
0.00
-1.10,
0.00,
0.00, 0.00
-1.10,
0.00,
0.00,
0.00
0.00,
0.00
-1.10, 0.00,
0.00
-1.10,
0.00,
0.00,
1.11,
0.00,
0.00,
0.00
0.00
1.11,
0.00
1.11,
0.00,
1.11,
0.000.00,
0.00,
0.00
0.00,
0.00,
0.00,
1.11,
1.25,
1.25,
1.11, 0.00,
0.00
0.00,
1.25,
1.11,
0.00
0.00
0.00
1.25,
0.00
1.11,
0.00
0.00,
0.00,
0.00,
1.25,
1.11,
0.00, 0.00
0.00,
1.11,
0.00
1.11,
0.00 0.00
0.00,
0.00,
0.00,
0.00
1.25,
1.11,
0.00
0.00,
0.00,
0.00
1.25,
1.25,
0.00, 0.00
0.00
0.00,
0.00
1.25, 0.00
0.00
0.00
0.00
0.00
0.00
LEEWARD FACE - 0.85 kPa
-1.10, -1.10,
0.00, 0.00
-1.10, 0.00,
0.00, 0.00 1.11,
0.000.00,
1.11,0.00,
1.25,
0.00,0.00
0.00
1.11,
0.00 0.00, 0.00
-1.10, 0.00, 0.00 0.00, 1.25, 0.00
0.00, 1.25, 0.00
-1.10,
-1.10,
-1.10,
-1.10,
-1.10,
0.00,
-1.10, 0.00,
-1.10,
0.00,
0.00,
0.00
-1.10, 0.00
-1.10,
0.00,
0.00
-1.10,
0.00,
0.00,
0.00
1.11,
0.00,
0.00,
0.00,
0.00
0.00
0.00,
1.11,
0.00,
0.00
1.11,
0.00,
0.00
1.25,
1.11,
1.11,
0.00
0.00,
0.00,
1.11,
1.25,
0.00,
0.00
0.00
0.00
0.00,
0.00,
1.11,
0.00, 0.00,
1.11,
0.00
1.25,
0.00,
0.00
1.11, 0.00,
0.00
0.00,
1.11, 0.00,
0.00
1.25,
1.11,
0.00,
1.25, 0.00
0.00
0.00
0.00
1.11,
0.00,
0.00,
0.00
1.25,
1.25,
0.00, 0.00
0.00
0.00,
0.00
0.00
0.00
0.00,
1.25,
0.00
0.00
0.00
0.00
OTHER SIDES - 1.11 kPa
-1.10,
-1.10, -1.10,
0.00,
0.00, 0.00
0.00 1.11,
0.00,
0.00, 0.000.00,
1.25,
1.11, 1.11,
0.00,0.00
0.00
0.00,
1.11, 0.00,
0.00,
0.00 1.25,
0.00,0.00
1.25,0.00
0.000.00
-1.10,
0.00, 0.00,
1.25, 0.00
0.00
-1.10,
-1.10,
-1.10,
0.00,
-1.10,
-1.10,
-1.10,
0.00,
-1.10,
0.00,
0.00
-1.10,
0.00,
0.00,
0.00
-1.10,
0.00, 0.00,
0.00
-1.10,
0.00,
0.00
0.00
0.00
0.00, 0.00
1.11,
0.00,
0.00
-1.10,
0.00,
1.11,
0.00
0.00,
1.11,
0.00,
0.00,
0.00,
0.00
1.11,
0.00, 1.11,
1.25,
0.00,
0.00,
1.11,
1.11,
1.25,
0.00,
1.25,
0.00,
0.00
1.11,
0.00,
1.25,
0.00
0.00
1.11,
0.00,
0.00
0.00
1.25,
1.11,
0.00,
0.00
0.00,
0.00,
0.00
1.11,
0.00
0.00,
0.00,
0.00
0.000.00
0.00
0.00,
1.25,
0.00
1.11,
0.00,
0.00
1.25,
0.00,
0.00,
0.00
1.25,
0.00
0.00
0.00
0.00
0.00
ROOF - 1.5 kPa
-1.10,
-1.10, -1.10,
0.00,
-1.10,
0.00, 0.00,
0.00 0.00,
0.00 0.00
1.11,
0.00 0.00, 0.00,
1.11,
0.00, 0.00
1.11, 1.25,
0.00,
0.00,
1.25,
0.00
1.11, 0.00
0.00,
0.00
0.00 0.00
-1.10, -1.10,
0.00,
-1.10, 0.00,
0.00 1.11,
0.00, 0.00
0.00,
1.11,0.00,
0.00 0.00,0.00
1.11,
1.25, 0.00,
0.00,
0.00
0.00,
0.00
1.11, 1.25,
0.00
1.25,
0.00, 0.00
0.00
0.00
-1.10,
-1.10, -1.10,
0.00,-1.10,
0.00, 0.00,
0.00 0.00,
0.00 0.00
-1.10, 0.00,
0.00, 0.00,
0.00
1.11, 1.25,
1.11,
1.25,0.00
0.00, 0.00
1.11,
0.00,0.00
0.00,
0.00,
0.00,
0.00 1.25,
0.00
1.11, 0.00,
0.00
1.25,
1.11, 0.000.00
0.00
0.00, 0.00
-1.10, -1.10,
0.00,-1.10, 0.00,
0.00 0.00, 0.00
1.11,
0.000.00,
1.11, 1.11,
0.00,1.11,
0.00, 0.00,
1.25,
0.00
0.00 0.00
0.00
0.00,
0.00, 1.25,
0.00 0.00
-1.10, -1.10,
-1.10,
0.00, 0.00,
0.00,
0.00 0.00
-1.10, 0.00,
0.00 0.00,
0.00,
1.11, 0.00
1.11, 1.25,
1.25,
1.11,
0.00, 0.000.00
0.00,
1.11,
0.00,
0.00,
0.00 1.11,
0.00,
1.25,
0.00,
0.00
1.25,
0.000.00, 0.00
0.00
0.00
0.00
-1.10,
-1.10,
-1.10,
0.00,
-1.10,
0.00,
-1.10,
0.00,
0.00 0.00,
0.00
0.00,
0.00
0.00, 1.25,
1.11,
0.00 0.00
0.00,
0.00, 0.00
0.00,
1.11,
1.11, 1.25,
1.11,
0.00,
0.00
1.25, 0.00
0.00
0.00
0.00,
0.00, 0.00,
1.25,
0.00 0.00
0.00
-1.10, -1.10,
0.00, 0.00,
0.00 1.11,
0.00
0.00,
1.11,0.00,
1.25, 0.00
0.00
0.00,
1.11,
0.00, 1.25,
0.00,
0.00 0.000.00
-1.10,
-1.10, -1.10,
0.00,
-1.10,
0.00,
-1.10,
0.00,
0.00 -1.10,
0.00,
0.00
0.00,
0.001.11,
0.00,
0.00, 0.00,
0.00 0.00
1.25,
1.11, 1.11,
0.00,
1.25,
0.00 0.00,
0.00
0.00
0.00,
1.11,
0.00, 1.11,
0.00,
0.00 1.25,
1.25,
1.11,
0.00,
0.00 0.00,
0.000.00
0.00 0.00
0.00,0.00
0.00
-1.10, 0.00, -1.10, 0.000.00, 0.00 1.11,0.00,
1.11, 1.11,
0.00, 0.00
1.25,
1.11,
0.00, 0.00,
0.00,
0.00 0.00
0.00, 0.00
1.25,
0.00 0.00
-1.10,-1.10,0.00,
-1.10, -1.10,
0.00,
0.00 -1.10,
0.00, 0.000.00, 1.11,
0.00,
0.00 0.00
0.00,
0.00 1.25,
1.11,
0.00, 0.00 0.00,
0.00,
0.00, 0.00
1.11, 0.00
1.25,1.25,
0.00, 0.00 0.00
0.00
-1.10, -1.10,
0.00, -1.10,
0.00,
0.00 0.00, 0.00,
0.00 1.11,
0.00,1.25,
1.11, 1.25,
1.11,
0.00,
0.00
0.00,
0.00
0.00, 0.00
0.00
1.11, 1.11,
0.00,
1.25,
0.000.00, 0.00 0.00,
0.00
0.00 0.00
-1.10,
-1.10, -1.10,
0.00,
0.00,
-1.10, 0.00,
0.00 0.000.00, 0.00
1.11, 0.00 0.00,
1.11,
0.00, 1.25,
0.00,
0.001.11, 0.00,
0.00
0.00, 0.00
0.00, 1.25,
1.25, 0.000.000.00
-1.10,
-1.10, 0.00,
-1.10,
0.00, 0.00 -1.10,
0.00,
0.00 0.000.00,
0.00, 0.00,
1.11, 0.00 1.25,
1.11,
0.00,
1.25,1.11, 0.00,
0.00,
0.00
0.000.00
1.11,
0.00, 0.00 0.00,
1.25,
1.11, 0.00 0.00
0.00,
0.00
0.00
-1.10, -1.10,
0.00,
-1.10, 0.00,
-1.10,
0.000.00,0.00,0.00 0.00,
0.00 1.11,
1.25,
1.11, 0.00,
0.00,
0.000.00
1.11,
0.00, 1.25,
0.000.00,
0.00,
0.00 0.00
0.00
1.25, 0.00
-1.10, -1.10,
0.00,
-1.10, 0.00,
-1.10,
0.000.00, 0.000.00,
0.00 1.11, 0.00,
1.11,
0.00,
0.00,
0.00 1.11,
1.25,
0.00,
1.25,
0.00 1.11,
0.00,
0.00,
0.00,
0.00 0.00
1.11, 0.00
0.00,
0.001.25,
0.00,
1.25,
0.000.00
0.00
0.00
-1.10, 0.00,
-1.10, -1.10,
0.00
0.00, 0.00,
0.00,
0.00 0.00
1.11, 1.11,
1.25,0.00,
0.00, 0.00,
0.00
1.11, 0.001.11,
1.25,
0.00, 0.00 0.00,
0.00
0.00 0.00
-1.10,
-1.10, 0.00,
-1.10,
0.00, -1.10,
0.00
0.00,0.00,
0.00 1.11,0.00,
0.00 1.11,
1.25, 0.00
0.00,
0.00,
1.11, 0.00,
0.00 1.25,
0.001.11,
0.00, 0.00
0.00,
0.00, 0.00
0.00,
0.00 1.25,
1.25, 0.00 0.000.00
-1.10,
-1.10, 0.00,
-1.10,
0.00, -1.10,
0.00 0.00,
-1.10,
0.00 0.00,
0.00
0.00, 0.00
1.11,
0.00, 0.00,
0.00
1.11, 1.25,
1.11,
0.00, 1.11,
0.000.00
0.00,
0.00,
0.00 1.11, 0.00,
0.00
1.25, 0.00
0.00, 0.00 0.00
0.00, 1.25, 0.00
1.11, 0.00, 0.00
-1.10,-1.10,
-1.10,-1.10,
-1.10,
0.00,
-1.10,
-1.10,
0.00,
-1.10,
0.00,
-1.10,
0.00,
0.00,
0.00
-1.10,
-1.10,
0.00,
0.00,
0.00
0.00
-1.10,
-1.10,
0.00,
0.00,
0.00
0.00
-1.10,
0.00,
0.00,
0.00
0.00
0.00,
0.00,
0.00,
0.00,
1.11,
0.00
0.00,
0.00
1.11,
1.11,
0.00
1.11,
0.00,
0.00,
1.11,
0.00,
0.00
0.00
0.00,
1.25,
0.00,
0.00
0.00,
1.25, 1.11,
0.00,
0.00,
0.00
0.00
1.11,
1.25,
0.00,
1.25,
1.11,
0.00
1.11,
1.25,
1.25,
1.11,
0.00,
0.00,
1.11,
0.00
0.00,
0.00,
0.00
0.00 1.11,
0.00,
0.00
0.00,
1.11,
0.00
0.00,
0.00,
0.00
0.00
0.00
1.25,
0.00,
0.00
0.00
1.25,
1.11,
0.00,
0.00,
0.00,
0.00
0.00
1.25,
0.00,
0.00
1.25,
0.00
0.00
0.00
0.00
0.00
0.00,
0.00
1.25,
0.00
0.00
0.00
0.00
Refer page no. 21
-1.10,-1.10, 0.00, 0.00,
0.00
-1.10, 0.00
0.00, 1.11,
0.00
1.11,0.00,
0.00,
1.11,
0.00, 1.25,
0.000.00,
1.11,
0.00,
0.00 0.00 1.25,
0.00,
0.00 0.00
0.00
-1.10, -1.10,
0.00,
-1.10, 0.00,
0.00
-1.10,
0.00, 0.00
0.00,
1.11,
0.00 0.00,
0.00
0.00,
1.11, 1.25,0.00,
1.11,
0.00
0.00, 0.00 1.25,
1.11,
0.00,
0.00 0.000.00
0.00, 0.00
-1.10, -1.10,
-1.10,
0.00, 0.00,
-1.10,
0.00,
0.00 0.00
-1.10,
0.00,0.00,
0.00 0.00,
0.00,
0.00
1.11, 1.25,
1.25, 0.00,
1.11,
0.00
0.00,
0.00, 0.00
1.11,
0.00
0.00
1.25,1.25,
1.11,
0.00, 0.00,
0.00,
1.11,
0.00,
0.00,
0.00
0.00 0.00
1.25,
0.00,
0.00
1.25,
0.000.00
0.00 0.00
-1.10, -1.10, -1.10,
0.00, 0.00,
0.00 1.11,
0.00
0.00, 0.00,
1.25, 0.00
0.00, 0.00 1.25, 0.00
-1.10,0.00, -1.10,
0.00,
-1.10,
0.00
-1.10,
0.00,
0.00
-1.10,
0.00,
1.11,
0.00,
0.00
0.00,
1.11,
0.00,
0.00
1.11,
0.00,
0.00
1.25,
1.11,
0.00,
0.00
1.11,
0.00,
0.00
0.00, 1.11,
0.00
0.00,
0.00
1.11,
0.00,
0.00
1.25, 0.00,
0.00,
0.00
0.00,
0.00
0.00 0.000.00
1.25, 0.00
-1.10,
-1.10, -1.10,
0.00,
-1.10,
0.00, 0.00,
0.00
-1.10,
0.00,
0.00 0.00 0.00,
0.00,
0.00 1.11, 1.25,
0.00 0.00,
1.11,
0.00, 0.00
1.11,
0.00,1.25,
1.11,
0.00 0.00,
1.11,
0.00,
0.00
0.00, 0.001.25,
0.00,
0.00
1.25,
1.11,
0.00, 0.00
0.00,
0.00 0.00
0.000.00
-1.10, -1.10,
0.00, -1.10,
0.00,
0.00 0.00,
0.00 0.00,
1.11, 1.11,
0.00 1.25,
0.00,
0.00,
1.11,
0.00, 0.00,
0.000.00
1.11, 0.00
1.25, 0.00,
0.00,
0.00 0.00 0.00
1.25, 0.00
-1.10, -1.10,
0.00, -1.10,
0.00,
0.00 -1.10,
0.00,
0.00
0.00, 0.00,
0.00,
0.001.11,1.25,
1.25, 0.00
0.00,1.11,
0.00,
0.000.000.00,
1.11,
0.00,
0.00
1.25, 1.25,
0.00,
0.00
0.00 0.00
0.00
-1.10, -1.10,
0.00, -1.10,
0.00,
0.00 0.00,
0.00 1.11,0.001.11,
0.00,
0.00,
1.11, 1.11,
0.00,
0.00
1.25,
1.11,
0.00, 0.00, 1.11,
0.00,
0.00
0.00
1.11,
0.00,
0.00 1.25,
0.00,
0.00 0.00,
0.00
0.00
0.00 0.00
-1.10,
-1.10,-1.10, -1.10,
0.00,
0.00,-1.10, 0.00,-1.10,
0.00,
0.00-1.10,0.00
0.00,
0.00 0.00,
0.00
0.00,
0.00 0.00
1.25,
1.11, 0.00,
1.11,
0.00, 0.00
0.00,
0.00 0.00,
1.25,0.00
1.11, 1.25,
0.00 0.00
0.00, 0.00
-1.10, -1.10,
0.00, -1.10,
0.00,
0.00 0.00,
0.00,
0.00 0.00,
1.11, 1.25,
0.00
1.11,
0.00
0.00,
1.11,
0.00,
0.00,0.00
1.11,
0.00,
0.00
0.00,
1.25,
0.00,
0.00 0.000.00
1.11,
0.00,
1.25,1.25,
0.00,
0.00
0.000.000.00
-1.10,
-1.10,-1.10, -1.10,
0.00,
0.00,-1.10, 0.00,
0.00
-1.10,
0.00-1.10, 0.00
0.00,
0.00,0.00,
0.00
1.11,1.25,1.25,
1.11,
0.00,
1.11,
0.00, 1.11,
0.00 0.00
0.00,
1.25,
1.11,
0.00,
0.00 0.00,
0.00
0.00, 0.00
0.00,
0.00 0.00
1.25,0.00 0.00
-1.10,-1.10, 0.00, 0.00, 0.00 0.00
0.00,
0.00, 0.00
1.11,
0.00, 0.00,
0.00
0.00,
1.11,
1.25, 0.00
1.11,
0.00,
0.00 0.00,
1.25, 0.00
0.00,
0.00
1.11, 1.25,
0.00
0.00, 0.000.00
-1.10, -1.10,
0.00,-1.10,
0.00,0.00,
0.00 0.00 0.00 0.001.11,
1.11,
0.00, 0.00,
1.25,0.00,
0.00,
0.000.00
1.11, 1.25,
0.00
0.00,
0.00, 0.00
0.00
1.25, 0.00
-1.10, 0.00,
-1.10, 0.00
0.00,
-1.10, -1.10, 0.00
0.00, 0.00,
0.00,
1.11,
0.00 0.00
1.11, 0.00,
1.11,
0.00,
1.25,
0.00,
1.11, 0.000.00
0.00, 1.25,
0.00,
0.00
1.11,
0.00,
0.00 0.00
0.00
0.00,
1.25, 0.00
0.00
-1.10, 0.00,
-1.10, 0.00
0.00,
-1.10, -1.10, 0.00,
0.00
0.00, 0.00,
1.11,
0.000.00,
1.25, 0.00
1.11,
0.00, 1.25,
1.11,
0.00
0.00,
0.00,
0.00
1.11, 0.00
0.00,
0.00,
1.11,
1.25,
0.00
0.00, 0.00
1.25,
0.00,
0.00
0.00 0.00
0.00
-1.10, -1.10,0.00, 0.00,
-1.10, 0.00 0.00
0.00,
-1.10, 0.00
0.00,
1.11, 0.00,
1.11,
0.00
0.00, 1.25,
0.00,
0.00,
1.11,
0.00 0.00
0.00,
0.00
1.25,
1.11,
0.00, 0.00,
0.00, 1.25,
0.00
0.00,
0.00 0.00,
1.09,0.00
0.00 1.50
0.00
-1.10, -1.10, 0.00, 0.00,
-1.10, 0.00 0.00
0.00,
-1.10, 0.00,
0.00
0.00,
1.11, 1.25,
1.11,
0.00,
0.00
0.00, 0.00
0.00,
0.00,
1.11,
1.25, 0.00,
0.00
0.00,
0.00,
0.00 1.25,
0.00,
0.00
1.11, 0.00,
1.09,
0.00,
0.00, 0.00
0.00
0.00, 1.50
0.00
0.00,
1.50 0.00 1.50
-1.10, -1.10, 0.00,
-1.10, 0.00,
-1.10, 0.00
0.00, 0.00
0.00,
0.00 1.25,
0.00
0.00,
1.11, 0.00
0.00,
1.11,
1.25,
0.00,
0.00,
1.11, 1.25,
1.11,
0.00,
0.00,0.00
0.00 0.00,
0.00,
0.00
1.09,
0.00,
0.00,
0.00, 0.00
0.00 0.00,
0.00,
0.00
1.09,
1.500.00 1.50
0.00,
0.00 1.50
-1.10,-1.10, 0.00, 0.00
0.00,
-1.10, -1.10, 0.00
0.00, 0.00,
1.11,
0.00,
0.00 0.00,
0.00
0.00,
1.11, 0.00,
1.25,
0.00, 1.25,
0.00
0.00, 1.11,
0.00
1.11, 1.09,0.00
0.00,
0.00
0.00,
0.00,0.00, 0.00,
0.00,
0.00,
0.00
1.09,
1.500.00 0.00,
1.50
0.00,
0.00 1.50
0.00, 1.50
-1.10,-1.10, 0.00, 0.00
0.00,
-1.10, -1.10, 0.00
0.00, 0.00,
1.11,
0.00,
1.25,
0.00
1.11, 1.25,
0.00,
0.00
0.00,
1.11, 0.00
1.09,
0.00,
0.00
0.00, 0.00
0.00,
1.11,
0.00 0.00,
0.00,
1.11,
0.00
1.09,
0.00
0.00, 0.00,
1.500.00
0.00,
0.00,
0.00
0.00 1.50
0.00,
0.00, 1.50 1.50
0.00,
-1.10, -1.10, 0.00,
-1.10, 0.00,
-1.10, 0.00
0.00, 0.00
0.00,
-1.10, 0.00 0.00,
1.11,
0.00
0.00, 0.00,
0.00, 1.25,
0.00,
0.00
1.11, 0.00,
0.00,
1.11,
1.09,
0.00,0.00
0.00
0.00, 0.00,
0.00,
1.50
0.00,
0.00
1.11,
1.09,
0.00 0.00,
0.001.50
0.00,
0.00,
0.00 1.50
0.00,
0.00,
0.00 1.50
0.00,
0.00, 1.50 1.50
0.00,
-1.10, -1.10,
0.00,
-1.10, 0.00
0.00, 0.00,
-1.10, 0.00,
0.00,
0.00 0.00,
0.00 1.25,
1.11,
0.00,
0.00, 0.00,
0.00,
0.00,
1.09,
0.00,
1.11,
0.00,
0.000.00 0.00,
1.11,1.50
0.00
0.00
0.00,
1.09,
0.00,
1.50
1.11, 1.50
0.00,
0.00,
0.00,
1.11,
0.00
0.00
0.00, 0.00
0.00,
0.00,
1.50
0.00,
0.00 0.00,
0.001.50
0.00, 1.50
0.00,
0.00, 1.50 1.50
0.00,
-1.10, -1.10, 0.00, 0.00,
-1.10, -1.10,
0.00 0.00
0.00, 0.00,
0.00, 1.11,
0.00,
0.00 0.00,
0.00
1.11,
0.00,
1.09,
0.00,
0.00, 1.11, 0.00,
0.00,
0.00
0.00,
0.00
1.11,
1.09,
1.500.00,0.001.500.00
0.00,
0.00,
0.00,
0.00
1.11,
0.00 0.00,
1.500.00
0.00,
0.00, 1.500.00,
0.00,
0.00, 0.00,
1.50 1.50
0.00, 1.50 1.50
-1.10,-1.10, 0.00,
-1.10,
0.00, -1.10,
0.00 0.00
0.00,
0.00, 0.00,
0.00,1.11,
0.00,
0.00
0.00, 0.000.00,
0.00,
0.00,
1.09,
1.11, 1.11,
1.50 1.11,
0.00, 1.50
0.00
0.00,
0.00,
0.00
0.00, 0.00,
0.00 1.50
0.00,
0.00,
0.00
1.11, 0.00
0.00,
1.500.00
0.00,
0.00, 1.500.00,
0.00,
0.00, 0.00,
0.00,
1.50 0.00,
1.50
-1.10,-1.10, 0.00, 0.00,
0.00,
-1.10, -1.10,
0.00 0.00,
0.00
0.00,
0.00,
0.00, 1.11,
0.00, 0.00,
1.500.00,
0.00,
0.00,
1.09,
0.00
0.00, 0.00
1.11, 1.50
0.00
0.00,
1.11,
1.50 1.11,
0.00,
0.00
0.00, 0.00,
0.00,
0.00, 0.00,
1.50
0.00 0.00
1.50
0.00
0.00,
0.00, 0.00,
1.500.00,1.500.00, 0.00,
0.00, 1.50 1.50
0.00,
-1.10,-1.10, 0.00,-1.10,
0.00, 0.00
0.00, 0.00,
0.00,
-1.10,
0.00, 0.00 0.00
1.11,
0.00,
1.50
0.00,
0.00,
1.11, 0.00,
0.00,
0.00,
0.00
1.11,
1.50
1.11,
0.00, 0.00, 1.11,
0.00
1.11,1.50
0.00,
0.00,
0.00,
0.00 0.00,
0.00 0.00,
1.50
0.00
0.00, 0.00 0.00,
0.00
1.50 0.00, 0.00,
1.50 1.50
0.00,
0.00, 1.50
0.00, 1.50
-1.10,-1.10, -1.10,
0.00, 0.00, 0.00
0.00, 0.00,
-1.10, 0.00,
0.00
0.00, 0.00 0.00,
0.00,
0.00,
1.50
1.11, 0.00
1.11, 1.50
1.11,
0.00,
1.11,
0.00,0.00,
0.00, 0.00 0.00,
1.11,
0.00,
1.50
0.00,
0.00
0.00, 0.00 0.00,
0.00,
0.00,
0.00
1.50 0.00,
0.00, 0.00,
1.500.00,
0.00 1.500.00,1.50
1.11,
0.00, 1.50
0.00,
0.00, 0.00,1.50
0.00, 0.001.50
-1.10, -1.10, 0.00,
-1.10, -1.10, -1.10,
0.00,0.00
0.00, 0.00,
0.00
0.00, 0.00,
0.00 0.00,
0.00
0.00,
0.00
1.11, 1.11, 1.50
0.00,
1.11,
0.00,
0.00, 1.11,
0.00,
0.00 0.00,
1.11,
0.00,
1.50
0.00,
0.00
0.00, 0.000.00,
0.00,
0.00,
1.500.00 1.50
0.00
0.00,
0.00, 0.00,
1.500.00,
0.00, 1.500.00,
0.00, 1.11,
0.00,
1.50 1.50
0.00, 0.00, 1.50 0.00
-1.10, -1.10, -1.10,
0.00, 0.00,
-1.10,
0.00
0.00, 0.00, 0.00,
0.00, 0.00
0.000.00, 1.50
0.00
0.00,
1.11,
0.00,
1.11, 0.00, 0.00,
1.11,1.11,
1.50
0.00,
0.00, 0.00,
0.00 0.00,
0.00,
1.11,
0.00,
0.00
1.50 0.00 1.50
0.00,
0.00,
0.00
0.00, 0.001.50
0.00,
0.00, 0.00,
1.50
0.00, 0.00, 1.11,
1.50
0.00,0.00, 0.00,
0.00,
1.500.00,
1.11, 0.00,
1.500.00
0.00, 1.50
0.00
-1.10, -1.10, 0.00, 0.00,
-1.10, 0.00
-1.10, -1.10,
0.00
0.00,
0.00, 0.00, 0.00
0.00,
0.00,
0.00
1.11, 1.11,
0.00, 0.00,
0.00
1.11,
1.501.11,
0.00,
0.00,0.00 0.00,
1.11,
0.00,
0.00, 0.00,
0.00
1.50 0.00 1.50
0.00,
0.00,
0.00
0.00, 0.001.50
0.00,
0.00, 1.50
0.00, 1.50 1.11, 0.00,
0.00,
0.00, 1.50
0.00,
0.00 1.50
-1.10, -1.10,0.00, 0.00,
-1.10, -1.10,
0.00 0.00 0.00,
0.00,
0.00, 0.00 0.00,
0.00
1.11,
0.00,
1.11, 1.11,
0.00, 0.00,
1.11,
0.00,
0.00,
1.50 0.00,
0.00 0.00 1.50
1.11,
0.00,
0.00,
0.00,0.000.00,
0.00
1.50
0.00, 0.00 0.00,
1.50 0.00,
0.00, 0.00,
1.50
0.00, 0.00,
1.11, 1.50
0.00,1.11,
0.00,0.00, 1.50
0.00,
0.00 0.00,1.50
0.00, 0.00
1.50
-1.10, -1.10, -1.10,
0.00, 0.00, 0.00,
0.00
-1.10, 0.00
-1.10, 0.00
0.00, 0.00,
0.00,
1.11,0.00
1.11, 0.00,
1.11,
0.00
0.00, 1.11,
0.00,
0.00,0.00,
0.00 1.50
1.11,
0.00,
0.00,
0.00,
0.00 0.00 0.00,
0.00,
0.00
1.50
0.00, 0.00 0.00,
0.00,
1.500.00, 1.50
1.50
0.00,
0.00, 0.00,
1.50
0.00,1.11, 1.11,
1.50
0.00,
0.00,0.00, 0.00,
1.11,
0.00,
1.500.00,
0.00, 0.00
0.00,
1.50
0.00, 1.500.00
-1.10, -1.10, -1.10,
0.00, 0.00,
-1.10, 0.00,
0.00
-1.10, 0.00
0.00, 0.00,
0.00
0.00,
0.00
1.11, 0.00,
0.00,
1.11,
0.00 1.11,
0.00, 1.50
1.11,
0.00,
0.00,
0.00,
0.00,
0.00 0.00 0.00,
0.00,
1.11,0.00
1.50
0.00, 0.00
0.00, 0.00,
0.00,
1.500.00
0.00, 1.50
0.00, 1.50
0.00,
0.00,
1.50 1.50
0.00,
0.00, 1.11,
0.00,
1.50 0.00
0.00,
1.50
1.11, 0.00,
0.00
0.00, 1.50
0.00
-1.10, -1.10, -1.10,
0.00, 0.00, 0.00,
0.00
-1.10, 0.00
-1.10,0.00
0.00, 0.00,
0.00,
1.11,0.00
1.11, 1.11,
0.00,
1.11,
0.00,
0.00
0.00, 0.00,0.00,
0.00 0.00 0.00,
0.00,
1.11,
1.50
0.00
0.00, 0.00, 0.00,
0.00
1.500.000.00,
0.00,
-1.10, 1.50
0.00,
0.00, 1.50
0.00,0.00 1.11,0.00,
1.50 0.00,0.00
1.11,
0.00, 0.00,0.00,
0.00,
0.00,
1.11, 1.50
0.00,
0.00
0.00, 1.50
0.00,
0.00 1.50
-1.10,
-1.10,
-1.10,
-1.10,
-1.10,
0.00,
-1.10,
0.00,
0.00,
-1.10,
0.00,
0.00,
0.00
-1.10,
0.00,
0.00
0.00 0.00
0.00,
0.00
0.00,
0.00 1.11,
0.00 1.11,
0.00 1.11,
0.00,
0.00, 0.00,0.00,
1.11,
0.00
0.00,
1.11,
0.00,0.00,
0.001.50
1.11,
0.00,
0.000.00,
0.00,
0.00,
0.00 0.00,
1.50
0.00
0.00,
0.00,
0.00
0.00,
1.50
0.00,
0.00, 0.00,
1.50
0.00,
1.50
0.00, 1.50 1.50
0.00,1.11,
1.11, 1.50
0.00,0.00
0.00,
0.00, 1.50
1.11,
0.00,
0.00,
0.00,
1.11, 1.50
0.00,
0.00
0.00,
0.00, 0.00,1.50
0.00,
0.00 0.001.50
-1.10, -1.10, -1.10,
0.00, -1.10,
0.00, -1.10,
0.00,
0.00 0.00,
0.00 0.00
1.11,0.00
1.11,
0.00, 1.11, 0.00,
1.11,
0.00,
0.00
0.00, 0.000.00,
0.00
1.11, 0.00,
0.00,
0.00,
0.00
1.11,
0.00, 0.00 1.50
0.00,
0.00, -1.10,
-1.10,
0.00,
0.00 0.00,
1.50
0.00,
0.00 0.00,0.00,
0.00,
1.50
0.000.00
0.00,
0.00,
1.50
1.11, 0.00,
1.50
0.00,
0.00,0.00,
1.11, 1.50
0.00
0.00,
0.00,
1.11, 0.00,
0.00,1.11,
0.00,
0.001.500.001.50
0.00,0.00,1.500.00
-1.10, -1.10, -1.10,
0.00, -1.10,
0.00,0.00-1.10,
0.00, 0.00,
0.00 0.00 0.00
0.00,
1.11,1.11,
0.00 0.00,
1.11,
0.00,0.00, 0.00,
0.00,
0.00,
0.00
1.11,
0.00
1.11, 0.00,
0.00
0.00,
0.00,1.50
0.00, 0.00,
0.00,
0.00
0.00 0.00, -1.10,
1.50 0.00,
0.00,
0.00,
1.50
0.00, 0.00, 1.50
0.00,
0.00,
1.50 0.00 1.50
0.00,
0.00,
1.50
1.11, 1.50
0.00,
0.00,
0.00,
1.11, 0.00 1.11,
1.50
0.00,
0.00,
0.00, 0.00,
0.00,
1.11,
0.00,
1.50
0.00 0.00,
0.00
0.00,
1.50 1.50
0.00
-1.10, -1.10, -1.10,
0.00, -1.10,
0.00, 0.00,
0.00 -1.10,
0.00 0.00
0.00,1.11,0.00
1.11,
0.00, 1.11,
0.00, 0.00,
0.00
1.11,
0.00,
0.00,0.00
1.11,
0.00
0.00
0.00,
1.11,
0.00,0.00,
0.00,
0.000.00, -1.10,
1.50
0.00,
0.00
0.00,
-1.10,0.00 0.00,
1.50
0.00,
0.00,
0.00,
-1.10, 0.00,
0.00,
1.50
0.00
0.00
0.00,
0.00, 1.50
0.00,
1.11,
0.00, 0.00
0.00,
1.11, 1.50
0.00,
1.50
0.00, 0.00
0.00,
1.11,
1.11,
0.00,
1.500.00
0.00,
0.00,
0.00,
1.11,
1.500.00
0.00,
0.00
0.00,
1.11, 1.50
0.00
0.00,
0.00, 1.50
0.00
-1.10, -1.10,-1.10,
0.00, -1.10,
0.00, -1.10,
0.00,
0.00
-1.10,
0.00,
0.00 0.00,
0.00
0.00,
0.00
1.11,0.00
1.11,
0.00 0.00,
1.11,
0.00,
1.11,
0.00
0.00,
0.00
1.11,
0.00,
0.00,
0.000.00,
0.00,
0.00
0.00, 0.00,
0.001.50-1.10,
0.00,
-1.10, 0.00,
0.00,
0.00,
-1.10,
1.50
0.00, 1.50
0.00
0.00,
0.00,
0.00 1.11,
0.00, 1.50
0.00,0.00,
0.00
1.11, 0.00,
0.00
1.500.00, 0.00,
0.00,
1.11,
0.00 0.00,
1.50
0.00,
0.00,
1.11, 0.001.50
0.00,
0.00,
0.00, 1.50
0.00
0.00, 1.50
-1.10, -1.10, -1.10,
0.00,
-1.10,
0.00,
-1.10, 0.00 -1.10,
0.00,
-1.10,
0.00,
0.000.00,
0.00,
0.00
0.00,
0.00
1.11,
0.001.11, 0.00
0.00,
0.00 0.00,
0.00
1.11, 0.00
1.11, 1.11,
0.00, 0.00,
0.00
0.00, 0.00,
0.00 0.00,
0.00,
-1.10,0.001.50 0.00,
0.00,
-1.10,
0.00, 0.00,
1.50
1.11,
0.00,
0.000.00,
0.00, 0.00,
0.00,
1.50
0.00,0.00
0.00,1.11, 0.00,
1.50
0.00,
0.00
1.50
0.00,0.00,
1.11,
0.00,
1.50
1.11,
0.00,
0.00
1.50
0.00,
1.50
0.00,
0.00,
1.11,
0.00,
0.00
0.00 1.11,
1.50
0.00,
0.00,
0.00,
1.11, 0.00 0.00,
1.50
0.00,
0.00, 0.00
1.50
0.00
-1.10, -1.10,
-1.10,
0.00,
-1.10,
0.00,
-1.10,
0.00, -1.10,
0.00,0.00
0.00 0.00 1.11,
0.000.00,
-1.10,
0.00,
0.00
1.11,
0.00,
1.11,
0.00 0.00,
0.00
0.00,
0.00
1.11,
0.00,
0.00
1.11,
0.00, 0.00,
0.00
1.11,
0.00,
0.00
0.00, 0.00
0.00,
-1.10,
0.00 0.00, 1.50
0.00,
0.00, -1.10,
0.00,
-1.10, 0.00
0.00,
0.00,
1.11,
0.00,
1.11,
0.00,
1.50 0.00,
0.00,
1.50
0.00,0.00
1.11, 0.00
0.00 0.00,
0.00
0.00,
1.50
0.00,1.11,1.50
0.00,
0.00,
0.00 0.00,
0.00,
1.50
1.11,
0.00, 0.00,
0.00 1.50
0.00,
0.00,
1.11, 1.25,
0.00
1.50
0.00, 0.00
0.00
-1.10, -1.10, -1.10,
0.00, -1.10,
0.00, -1.10,
0.00,
0.00 0.00,
0.00
1.11,
0.00,
0.00
1.11,
0.00
1.11,
0.00,
0.00
1.11,
0.00,
1.11,
0.00,
1.11,
0.00
0.00,
0.00
0.00,
1.11,
0.00 0.00,
0.00,
0.000.00
0.00,
0.00
0.00
-1.10,0.00,
-1.10,
0.00, 1.50
0.00,
0.00,
-1.10,
0.00,
0.00, 0.00,
0.00
1.50
-1.10,
0.00,
0.00,
-1.10,
0.00 0.00,
0.00,
0.00
1.11,
0.00,
1.50
0.00,
1.11, 0.00,
0.00,
1.50
0.00,
0.00
1.11,
1.11,
0.00,
0.00, 0.00
0.00
0.00,
1.50
0.00
0.00,
1.50
0.00,1.11,
0.00, 0.00
1.50
0.00,
0.00,
0.00 0.00,
0.00,1.50
1.11,
0.00,0.001.25,
0.00,
1.50 0.000.00
-1.10, -1.10, -1.10,
0.00, -1.10,
0.00,0.00-1.10,
0.00, 0.00,
0.00 0.00,
0.00
1.11,1.11,
0.00, 1.11,
0.000.00 1.11,1.11,
0.00,
1.11,0.00 0.00,
0.00
0.00, 0.00 0.000.00,
0.00, 0.00,
-1.10,
0.00,
0.00 0.00,
1.50
0.00,
-1.10,
0.00, 0.00,
0.00,
0.00-1.10,
0.00,
1.11,
1.50 0.00,0.00
1.11,1.50
0.00,
0.00, 0.00,
0.00 1.50
0.00,1.11,
0.00,
0.00
0.00 0.00,
1.50
1.11,
0.00, 0.00,
0.000.00,
0.00,
1.501.11,1.25, 1.25,
0.00
0.00, 0.00 0.00
0.00
-1.10, -1.10, -1.10,
0.00, -1.10,
0.00,
0.00-1.10,
0.00, 0.00, 0.00,
0.00
0.000.00, 0.00
1.11,
1.11, 0.00
1.11,
0.00,
1.11,
0.00, 0.00,
0.00
1.11,
0.00
0.00,
1.11,
0.00,
0.00
0.00,
0.00
0.00,
0.00
0.00 -1.10,
0.00,
0.00
-1.10,
0.00,
0.00,
-1.10,
0.00,0.00, 0.000.00,
-1.10,
0.00,
0.00,
1.50
-1.10,
0.00 0.00
1.11, 0.00,
1.11,
0.00,
0.00, 1.50
0.00,
0.00,
0.00,
-1.10,
0.00, 0.00,
0.00
1.11,
1.50
0.00,
1.11,
0.00 0.00
0.00,
0.00
0.00,
0.00, 0.00,
1.50
0.00,
1.11,
1.50
0.00,0.00
0.00 0.00,
0.00
0.00,
0.00, 0.00,
1.11,
1.50 1.50
0.00
1.25, 1.25,
0.00, 0.00
0.000.00
-1.10, -1.10, -1.10,
0.00, -1.10,
0.00,0.00-1.10,
0.00,
-1.10,0.00 1.11,
0.00,
0.00 0.00
1.11,
0.00,
1.11,
1.11,
0.00,
0.00
0.00,
0.00
0.00,
0.00
1.11,
0.00,
1.11, 0.00
0.00
1.11,
0.00,
0.00
0.00, 0.000.00,
0.00 0.00 0.00,
-1.10, -1.10, 0.00,
1.11,
0.00,
0.00, 0.00 1.50
0.00,
0.00,
-1.10,
0.00,
0.00, 1.11,1.11,
0.00 0.00
0.00,
1.50 0.00,
0.00,
0.00,
0.00,
0.00, 1.11,
0.00,
0.00
0.00
1.50
0.00
0.00,
1.11, 0.00,
0.00,
1.50
1.11,
0.00,
1.50 0.00,
0.00,
0.00
0.00,
0.00
1.50
0.00,
1.25, 1.25,1.25,
0.00
0.00 0.00 0.00
-1.10, -1.10, -1.10,
0.00, -1.10,
0.00,
-1.10,
0.00,
0.00
-1.10,
0.00,
0.00 0.00
0.00,
-1.10,
0.00,
0.001.11,
0.00
0.00,
0.00 1.11,
0.001.11,
0.00, 1.11,
0.00,0.00,
0.00 0.000.00,
0.00 -1.10,
0.00
-1.10, 0.00, 0.00,
-1.10,
0.00, 0.00,
0.00,
0.000.00
0.00, 1.50
-1.10,
0.00,
1.11,
0.00,
-1.10,
1.11, 0.00
0.00,
0.00,
0.00,
1.50
0.00,
0.00,
-1.10,
1.11,-1.10,
1.11,
0.00
0.00
0.00
0.00,
0.00
0.00,
1.50
0.00,
0.00, 0.00,
0.00, 0.00,
1.11,
0.00
0.00,
0.00
0.00,
0.00 0.00
0.00, 0.00,
0.00,
1.50
1.25,
1.11,
1.11,
1.50
1.25,
0.00
0.001.25,
0.00,
0.00,
0.00
0.00 0.00
0.00
-1.10, -1.10, 0.00, 0.00,
-1.10,0.00
-1.10, 0.00
0.00, 0.00, 1.11,
0.000.00 1.11,
1.11,
1.11,
0.00,
1.11,
0.00,
0.00,
1.11,
0.00,
0.00
0.00,
0.00
0.00
0.00,
0.00
0.00 0.00
-1.10,
-1.10, 0.00,0.00,
-1.10,
0.00, 0.00,
0.00 0.00
0.00, -1.10,
0.00,
1.11, 0.00,
1.11,
1.50
0.00,0.00
0.00, 0.00,
0.00,
1.11,0.00,
0.00,
1.11,
1.50
0.00
1.11,
0.00
-1.10,0.001.50
0.00,
0.00,
0.00,
0.00,
0.00,
0.00,
1.11, 0.00,
0.00
1.25,
0.00
0.00
1.50
0.00
1.25,
0.00, 1.25,
0.00,
0.00 0.00
0.00 0.00
1.25, 0.00
-1.10, -1.10,
-1.10,
-1.10,
0.00,
-1.10,
0.00,
-1.10,
0.00,
0.000.00,
-1.10,
0.00,
0.00 0.00
-1.10,
0.00,
0.00 0.00,
0.00 0.00,
0.00 0.000.00 1.11,
1.11,
1.11,
0.00,
0.00,
0.00,
0.00
1.11,
0.00
-1.10,
0.00
0.00, 0.00 0.00,
-1.10, 0.00
0.00, -1.10,
0.00,
1.11,
-1.10, 0.00,
0.00
0.00,
0.00, 0.00,
-1.10,
0.00, 0.00,
-1.10,
0.00,
1.11,0.00
1.50
0.00 0.00
0.00,
0.00, 1.50
0.00,
1.11,
0.00,
0.00
0.00,
1.11, 0.00 0.00
0.00,0.00,
0.00,
1.50
1.25,0.00,
1.11,
0.00
1.11,
0.00
1.25,
0.001.25,
0.00,
0.00,
0.00
0.00
0.00
0.00
-1.10, -1.10, 0.00,
-1.10, 0.00
-1.10,
0.00, -1.10,
0.00, 0.00,
0.00 0.00,
0.00 0.000.00 1.11, 1.11,
0.00,0.00,
0.000.00 -1.10,
-1.10,
-1.10, 0.00,
0.00,
0.00,
-1.10,
0.000.000.00,
0.00
0.00,
1.11,1.11,
-1.10, 0.00,
0.00,
0.00
0.00, 0.00,
0.00,
1.11, 1.50
1.11,
0.000.00
0.00,
-1.10, 0.00,
0.00
0.00,
0.00, 1.50
0.00, 0.00
1.11,
1.25,
0.00
1.11, 0.00,
0.00
0.00, 0.00,
1.25,
0.00, 1.25,
0.00
0.00 1.25,
0.00
0.00 0.00 0.00
-1.10,
-1.10,
-1.10, -1.10,
0.00,
0.00, -1.10,
0.00, -1.10,
0.00,
0.00
0.00 0.00,
0.00 0.000.00 1.11,
0.00,
0.00 0.00,0.00,
1.11,
1.11, 0.00,
0.000.00 -1.10, 0.00,
0.00 -1.10, 0.00, 0.00,
-1.10,
1.11,
-1.10, 0.00 0.00 1.11,
0.00,
0.00,
0.00,
1.11,0.00,
-1.10,
0.00, -1.10,
0.00 0.00,
1.50
0.00
0.00,
0.00,
0.00 1.11, 0.00,
0.00
0.00,
0.00
1.11,1.50
0.00,
0.00,
0.00 0.00
0.00,
0.00, 0.00,
1.25,
1.11,
0.00 1.11,
0.00
1.25, 1.25,
0.00
0.00,0.00,
0.00 0.00
0.00 0.00
-1.10, -1.10, 0.00,
-1.10, -1.10,
0.00,
0.00
0.00, 0.00,
0.00 0.000.00 -1.10,
-1.10,
0.000.00, 0.00,
-1.10,
0.000.00 1.11,
-1.10,
0.00,
0.00, 0.00,
0.00 1.11,
0.00, 0.00
0.00, 0.00,
-1.10,
0.00
1.501.11,1.11,
0.00
0.00, 0.00,
0.00,
0.00
0.00, 0.00
1.25, 0.00
1.25,
0.00, 0.00 0.00
1.25, 0.00
-1.10, -1.10,
-1.10,
0.00,
-1.10,0.00,0.00
-1.10,
0.00,
-1.10,
0.00,
0.00
-1.10,
0.00
0.00
0.00,
0.00, 0.00,
0.000.00
0.00
1.11, 0.00, -1.10,
-1.10, 0.00,0.00,
1.11,
-1.10,
0.00 0.00
0.00,
1.11,1.11,
0.00,0.00 0.00,
-1.10,
0.00, 0.00
1.11,0.00,
1.11,
0.00
0.00,
0.00 0.00, 1.25,
0.00,
0.00
1.11,
0.00,
0.00
1.11, 0.00
1.11,
0.00
0.00,0.00,
1.25,
0.00,
0.00,
1.25,
0.00 0.00
0.00 0.00
0.00
-1.10,
-1.10, -1.10,
0.00,
-1.10,
0.00, 0.00
0.00
0.00, 0.00,
0.00 0.00 -1.10,
-1.10, 0.00,0.00,
-1.10,
-1.10,
-1.10,
0.000.00 1.11,
0.00,
0.00,
1.11, -1.10,
0.00
-1.10,
0.00,
0.00, 0.00,
0.00
1.11,
0.00
1.11,
0.00,
0.00
0.00,
0.00
0.00,
0.00,
0.00,
0.00
-1.10,
1.11,
0.00
0.00
1.11,
0.00
0.00,
0.00,
1.25,
0.00,
0.00,
0.00
1.25,
1.11,
0.00
0.00
0.00,
0.00
1.25,1.25,
0.00
0.00,0.00 0.00
0.00
-1.10, -1.10,
-1.10, 0.00, 0.00,
-1.10,
0.00
0.00,
-1.10,
0.000.00
0.00,
0.00
0.00, 0.00 -1.10,
-1.10, 0.00,0.00, -1.10,
-1.10,
0.00 0.00 1.11,
0.00,0.00,-1.10,
0.00,
0.00 0.00
1.11,0.00,
0.00,
0.00 0.00, 1.25,
1.11,
0.00
0.00
0.00,
1.11, 0.00
0.00,
1.25,
0.00,
0.00, 1.25,
0.00, 0.00
0.00
1.25, 0.00
0.00 0.00
-1.10, 0.00,
-1.10, 0.00
0.00,
-1.10, 0.00
0.00, 0.00 -1.10, 0.00, -1.10,
-1.10, 0.00 0.00,
0.00, 1.11,
0.00
-1.10, -1.10,
0.00
0.00,
1.11, 1.11,
0.00, 0.00,
0.000.00,
0.00, 0.00
0.00,
1.11,
0.00
0.00
1.11, 0.00
0.00,1.25,
0.00,
0.00, 0.00
0.00
1.25,
1.11,
0.00 0.00
0.00, 0.00
-1.10,-1.10,
0.00,0.00,
0.000.00 -1.10,
-1.10, 0.00,0.00,
-1.10,
-1.10, 0.00 0.00
1.11,
-1.10,
0.00,
0.00,
1.11,
0.00,0.00,
0.00
0.00
0.00,
-1.10,
0.00
1.11,
-1.10,
0.00
1.11,
0.00
0.00,
0.00,
0.00,
0.00,
0.00, 0.00
1.25,
1.11,
0.000.00
0.00, 0.00
1.25,
0.00,
1.11, 0.00
0.00,
1.25,
0.00,
0.00
1.25,
0.00,
0.00 0.00
0.00
1.25,
0.00
0.00
-1.10, 0.00,0.00,
-1.10, 0.000.00 -1.10, 0.00,
-1.10, 0.000.00,1.11,
-1.10,
0.00 0.00,
-1.10,
1.11, 0.00
0.00, 0.00,
0.00, 1.11,
0.00
0.00,
0.00
0.00
1.11, 0.00,0.00,
0.00,
1.25,
1.11,
0.00 0.00
1.11,1.25,
0.00
0.00,0.00,0.00
0.00 0.00
-1.10, 0.00, 0.00 -1.10,
-1.10, 0.00,0.00, -1.10,
-1.10,
0.000.00
1.11, 0.00,
0.00,0.00,
1.11, 0.00
0.00
0.00, 0.00
-1.10,
1.11,
0.00
0.00, 0.00,
0.00, 0.00
1.11,
1.25,
0.00, 0.00,
0.00
1.25,
0.00,
0.00
1.25,
0.00, 1.25,
0.00
0.00
0.00
1.25, 0.00
0.00
-1.10, 0.00, 0.00 -1.10, 0.00, -1.10,
-1.10, 0.00 0.00,
0.00,1.11,
1.11, -1.10,
-1.10, 0.00
0.00,0.00
-1.10,
0.00,
0.00,
1.11,
-1.10,
1.11,0.00
0.00,
0.00 0.00
0.00,
0.00,
0.00,
0.00, 0.00
0.00
1.11,
0.00,
0.00
1.11,
0.00
0.00
0.00,0.00,
0.00,
1.25,1.11,
0.00
0.00,
1.11, 1.25,
0.00
0.00
1.25,
0.00, 0.00
0.00,
0.00 0.00
0.00
-1.10,
-1.10, 0.00,0.00,
-1.10,
-1.10,0.000.00
0.00, 0.00,
1.11,
1.11, 0.00
0.00, 0.00
0.00,
-1.10, 1.11,
-1.10,
0.000.00
0.00,
0.00,0.00,
0.00,
0.00,
1.11, 0.00
1.11,
1.25,
0.00
0.00, 1.25,
0.00
0.00,0.00,
0.00
1.25,
0.00,
0.00
0.00
0.00
0.00
1.25, 0.00
-1.10, 0.00, -1.10, 0.00
0.00,
1.11, -1.10,
-1.10, 0.00 -1.10,
0.00, 1.11,
0.00,
0.00
0.00,
1.11, 0.00,
0.00
0.00,0.00,
0.00 0.00
0.00,
1.11,
0.00 0.00
0.00, 0.00,
1.25,
0.00
0.00,
1.11, 1.25,
1.11,
0.000.00,
1.25,
0.00, 0.000.00
0.00
0.00
-1.10,
-1.10, 0.00,0.00,
-1.10,
0.000.00
1.11,1.11,
0.00,0.00,
-1.10, 0.00,
0.00 -1.10,
0.00
1.11,
-1.10,
0.00
0.00, 0.00,
0.00,
0.00,
0.00,
0.000.00,
1.11,
0.00
1.25,
0.00 1.25,
0.00
1.25,
0.00,
0.00
0.00, 0.00
0.00
0.00
1.25, 0.00
-1.10, -1.10,
-1.10,
0.00, 0.00,
0.00 0.00,
1.11, -1.10,
0.00 0.00
0.00,1.11,1.11,
0.00
0.00, 0.00,
0.00, 1.11,
0.00
0.000.00
0.00, 0.00,
0.00,
1.25, 1.25,
0.00
0.00
1.11, 0.00
0.00, 0.00
-1.10,
-1.10, 0.00,
-1.10,
0.00,
-1.10,
-1.10,
0.000.00
1.11,
0.00, 1.11,
0.00, 0.00,
0.00,
0.00
-1.10,
0.00,
0.00
0.00
1.11,
0.00 1.11,
0.00
-1.10,
0.00,
0.00,0.00,
0.00,
0.00,
0.00, 1.25,
0.00
0.00,
1.11,
0.001.25,
0.00,
1.11,
0.00
0.00
0.00
1.25,
0.00,
0.00,
0.00
1.25,
0.00, 0.00
0.00
0.00
1.25,
0.00
0.00
-1.10, -1.10,
0.00, 0.00,
0.00 -1.10,
0.00-1.10,
1.11,1.11,1.11,
0.00,
0.00, 0.00,
0.00,
0.00,
0.00 0.00
0.000.00
1.11,
0.00,
0.00 0.00,
0.00,
1.25, 1.25,
1.11,
0.00
0.000.00,0.000.00
-1.10,
-1.10, 0.00,
-1.10,
-1.10,
0.00,
0.000.00 0.00, 0.00,0.00
-1.10,
1.11, 0.00
1.11,
-1.10,
1.11, 0.00,
0.00,
0.00,
0.00,
0.00,
0.00, 0.00
1.25,
0.00
0.00,
1.11,
0.00 1.25,
0.00,
1.11,
0.00
0.00
0.00
1.25,
0.00,
0.00, 0.00
1.25,
0.00, 0.00
1.25,
0.00 0.00
0.00 0.00
-1.10, 0.00, -1.10,
-1.10, 0.00
0.00,0.00,
-1.10,
0.00-1.10,
0.00
1.11, 0.00, 0.00,
0.00, 0.00
1.11, 0.00
0.00
0.00,
1.11,
0.00, 0.00,
1.25,
0.00, 1.25,
0.00
0.00
1.11,
0.00,
0.00 0.00
0.00,
1.25, 0.00
0.00
-1.10,
-1.10, 0.00,0.00, -1.10,
-1.10,
0.000.00 0.00,0.00, 0.00
1.11,
-1.10,0.00
1.11,
-1.10,
0.00,
0.00,
0.00,0.00,
0.00,
0.00,
0.000.00
1.25,
0.00
0.00,
1.11, 1.25,
0.00
1.11,0.00
1.25,
0.00, 0.00
0.00, 0.00
0.00
0.00
-1.10, 0.00, -1.10,
0.00 0.00,
-1.10,-1.10,
0.00 0.00, 0.00, 0.00
1.11,
0.00,
0.00
1.11, 0.00, 0.00,
0.00,
1.25, 0.00,
1.25,
0.00
0.00
1.11,
0.00 1.25,
0.00,0.00 0.00
0.00
-1.10, -1.10,
-1.10,0.00, 0.00,
0.00, -1.10,
0.000.00 0.00 0.00, 1.11,
0.00
-1.10, 0.00,
0.00, 0.00
1.11, 1.25,
0.00,
0.00
1.11,
0.00, 0.00
1.25,
0.00,
1.25,
0.00, 0.00
0.00
0.00
0.00
-1.10, 0.00, -1.10,
0.00
-1.10,
-1.10, 0.00,
0.00,
0.00,
-1.10,
-1.10,
0.00 0.00-1.10,
0.00
0.00,
0.00,
0.00,0.00,
1.11,
1.11,
0.00,
0.00
1.25,
0.00 0.00
0.00,
0.00,0.00, 0.00
0.00,
0.00
1.25, 0.00
1.25,
0.00
1.11, 1.25,
0.00
0.00, 0.00
0.00
-1.10,
-1.10, 0.00,0.00, 0.00
-1.10,
0.00 0.00, -1.10,
0.00 0.00,
0.00,
1.11, 1.25,
0.00,
1.11,
0.00
0.00, 0.00
1.25,
0.00,
0.00 0.00
0.00
-1.10,
-1.10,
-1.10,
-1.10, 0.00,
0.00,
0.00,
0.00, 0.00 0.00 0.00-1.10,
-1.10,0.00 0.00,
0.00,
0.00, 1.11,1.25,
0.00
0.00, 0.00
0.00,
0.00,
1.25,
0.00, 0.00
1.25,
0.00
0.00,
0.00
1.25,
1.11, 0.00
1.25,
0.00,0.00 0.00
0.00
-1.10,
-1.10,
-1.10, 0.00, 0.00, 0.00,
0.00 -1.10,
0.00 0.00
0.00, 1.11,
0.00, 1.11,
1.25, 1.25,
0.00,
0.00,
0.00 0.00,
0.00 0.00
1.25,
0.00 0.00
0.00
-1.10,
-1.10, 0.00,
0.00, 0.000.00
-1.10,-1.10, 0.00,0.00,
0.00,
0.00 0.00
0.00,
1.25, 1.25,
0.00,
1.11,
0.00,
1.11, 0.00 0.00
1.25,
0.00,
1.25,
0.00, 0.00
0.00 0.00
0.00
-1.10,
-1.10, -1.10,
-1.10,
0.00,0.00,0.00,
0.00 0.00,
0.00 0.00 0.000.00, 1.25,
-1.10, 0.00,
0.00
0.00,1.25,
0.00
1.25,0.00
0.00
-1.10,
-1.10, 0.00,
0.00, 0.00, 1.25,
0.000.00,
0.00 0.00
1.25,
1.11,
0.00, 0.00
0.00,
1.25, 0.00
0.00
-1.10, -1.10,
-1.10, 0.00,0.00,0.00,
0.00 0.00 0.00,
0.00 1.25,
0.00,
1.25, 0.00
0.00, 1.25,
0.00
1.25, 0.00
0.00
-1.10, -1.10,
-1.10, 0.00,
0.00, 0.00,
0.00,
0.00 0.00,
1.25,
0.00 0.00
0.00,1.25,
0.00
1.25, 0.00
0.00
-1.10,
-1.10, 0.00, 0.00,0.00 0.00
0.00,
0.00,1.25,0.00,
1.25,0.001.25,
0.00 0.00
-1.10, -1.10,
-1.10,0.00,-1.10,0.00,
0.00,
0.00,0.000.000.00,
0.00,
0.00
1.25, 1.25,
0.00
0.00, 1.25,
0.00 0.00
0.00
0.00,
0.00,1.25,
0.00, 1.25,0.00
1.25,0.00
0.00
-1.10,-1.10,-1.10,
0.00,0.00,
0.00, 0.00,
0.00 0.00
1.25, 0.00
0.00
0.00,
0.00, 1.25,
1.25, 0.00
-1.10,-1.10, 0.00,
0.00,
0.00, 0.00 0.00 0.00
0.00,1.25,
1.25,0.00
0.00
-1.10,
0.00, 0.00,
1.25, 0.00
0.00
SEISMIC LOAD -
CONSIDERED IN X AND
Y DIRECTIONS
Maximum drift = 2 mm
Maximum perimissible drift = 28000/400 = 70 mm
LIFT SHAFT TOP DRIFT DUE TO SEISMIC CASES
Number: 181344
Max drift = 21 mm
Multiplying by amplification factor as per Cl. 4.1.8.13 of OBC, max drift
= 21*Rd*R0/Ie = 21*1.5*1.3/1.5 = 27.3mm
Permissible interstorey drift = 0.01*h = 280mm
Hence OK
DESIGN
-240 -180 -120 -60 0 60 120 180 240 300 360 420 480 540
SAP2000 18.1.1 Resultant M11 Diagram (STRENGTH ENV - Max) KN, m, C
TWAS_S~1.sdb 19-09-2017
-70 0 70 140 210 280 350 420 490 560 630 700 770 840
SAP2000 18.1.1 Resultant M22 Diagram (STRENGTH ENV - Max) KN, m, C
TWAS_S~1.sdb 19-09-2017
-0.24 0.00 0.24 0.48 0.72 0.96 1.20 1.44 1.68 1.92 2.16 2.40 2.64 2.88 E+3
SAP2000 18.1.1 Resultant V13 Diagram (STRENGTH ENV - Max) KN, m, C
TWAS_S~1.sdb 19-09-2017
0.00 0.35 0.70 1.05 1.40 1.75 2.10 2.45 2.80 3.15 3.50 3.85 4.20 4.55 E+3
SAP2000 18.1.1 Resultant V23 Diagram (STRENGTH ENV - Max) KN, m, C
Owner: Twas Computed By: SN
Plant: Twas Building Date: 08.09.17
Unit: 400thk walls and slab Verified By: NVN
Project/File No.: 181344 Date:
Title: RCC Slab Design Sheet Page: 1
Input Parameters
Overall thickness of slab h := 400mm Clear cover to main reinforcement c := 40mm
Clear shorter span of the slab lx := 4.265m Width of the beam supporting slab bw := 200mm
Clear longer span of the slab ly := 3.5m Dpth of the beam supporting slab hb := 350mm
Specify the type of slab type := 1 Enter the row number of the slab type from table
For example, enter type = 1 for one-way slab
Specify the type of spanning of slab span := 1 Enter the row number of the support.
For example, enter span = 4 for Cantilever
kN
Specified compressive strength of concrete fc := 30MPa Density of concrete := 23.5
3
m
Specified yield strength of reinforcement fy := 400MPa
Modulus of Elasticity Es := 200000MPa
Resistance factor for concrete (cl.8.4.2) c := 0.65
kNm
Resistance factor for reinforcing bar (cl.8.4.3) s := 0.85 Factored Moment-Top/Support Mt := 140
m
kNm
Factored Moment-Bottom/Sagging Mb := 271 Factored Shear Force kN
m Vf := 183
m
Provided Reinforcement Asb1 2 Ast1 2
mm mm
Asb := = 2500 Ast := = 2500
sb m st m
dfb
Effective Depth to tension steel db := h c = 347.4 mm
2
Asb
Percentage of steel provided b := = 0.007
db
Resistance factor fy
Krb := 1 s b f = 2.256 MPa
( 2 c 1 fc) b s y
2 kN m
Actual nominal flexural strength Mrb := Krb db = 272
m
Resistance factor fy
Krt := 1 s t f = 2.256 MPa
( 2 c 1 fc) t s y
2 m
Actual nominal flexural strength Mrt := Krt dt = 272.3 kN
m
Check for crack control parameter (CSA A23.3-14, cl.10.6.1)
dft 2
dct := min ( c , 50mm) + = 52.6 mm At := 2 dct st = 21040 mm
Depth of tension steel for crack control 2
1
3
Zactt := 0.6fy ( dct At) = 24825
Quantity limiting distribution of flexural reinforcement kN
Check for Shear m
OUTPUT SUMMARY
Bottom Reinforcement Checks Top Reinforcement Checks
R1 = "Compression steel is not required" R5 = "Compression steel is not required"
R2 = "Reinforcement provided is more than min-OK" R6 = "Reinforcement provided is more than min-OK"
R3 = "Reinforcement provided is OK for flexure" R7 = "Reinforcement provided is OK for flexure"
R4 = "Spacing between the reinforcement is OK" R8 = "Spacing between the top reinforcement is OK"
Shear Check R9 = "Shear Capacity is OK"
DESIGN OF 300 THK WALLS &
SLABS
TWAS_S~1.sdb 19-09-2017
-240 -180 -120 -60 0 60 120 180 240 300 360 420 480 540
SAP2000 18.1.1 Resultant M11 Diagram (STRENGTH ENV - Max) KN, m, C
TWAS_S~1.sdb 19-09-2017
-70 0 70 140 210 280 350 420 490 560 630 700 770 840
SAP2000 18.1.1 Resultant M22 Diagram (STRENGTH ENV - Max) KN, m, C
TWAS_S~1.sdb 19-09-2017
-0.24 0.00 0.24 0.48 0.72 0.96 1.20 1.44 1.68 1.92 2.16 2.40 2.64 2.88 E+3
SAP2000 18.1.1 Resultant V13 Diagram (STRENGTH ENV - Max) KN, m, C
TWAS_S~1.sdb 19-09-2017
0.00 0.35 0.70 1.05 1.40 1.75 2.10 2.45 2.80 3.15 3.50 3.85 4.20 4.55 E+3
SAP2000 18.1.1 Resultant V23 Diagram (STRENGTH ENV - Max) KN, m, C
Owner: Twas Computed By: SN
Plant: Twas Building Date: 08.09.17
Unit: Lift shaft-walls above ground Verified By: NVN
design Date:
Project/File No.: 181344 Page: 1
Title: RCC Slab Design Sheet
Input Parameters
Overall thickness of slab h := 300mm Clear cover to main reinforcement c := 25mm
Clear shorter span of the slab lx := 4.265m Width of the beam supporting slab bw := 200mm
Clear longer span of the slab ly := 3.5m Dpth of the beam supporting slab hb := 350mm
Specify the type of slab type := 1 Enter the row number of the slab type from table
For example, enter type = 1 for one-way slab
Specify the type of spanning of slab span := 1 Enter the row number of the support.
For example, enter span = 4 for Cantilever
kN
Specified compressive strength of concrete fc := 30MPa Density of concrete := 23.5
3
m
Specified yield strength of reinforcement fy := 400MPa
Modulus of Elasticity Es := 200000MPa
Resistance factor for concrete (cl.8.4.2) c := 0.65
kNm
Resistance factor for reinforcing bar (cl.8.4.3) s := 0.85 Factored Moment-Top/Support Mt := 82
m
kNm
Factored Moment-Bottom/Sagging Mb := 82 Factored Shear Force kN
m Vf := 67
m
Provided Reinforcement Asb1 2 Ast1 2
mm mm
Asb := = 1000 Ast := = 1000
sb m st m
Refer page nos. 176 & 177
Design for Flexure-Bottom/Sagging Moment
dfb
Effective Depth to tension steel db := h c = 267 mm
2
Asb
Percentage of steel provided b := = 0.004
db
Resistance factor fy
Krb := 1 s b f = 1.222 MPa
( 2 c 1 fc) b s y
2 kN m
Actual nominal flexural strength Mrb := Krb db = 87
m
Resistance factor fy
Krt := 1 s t f = 1.222 MPa
( 2 c 1 fc) t s y
2 m
Actual nominal flexural strength Mrt := Krt dt = 87.1 kN
m
Check for crack control parameter (CSA A23.3-14, cl.10.6.1)
dft 2
dct := min ( c , 50mm) + = 33 mm At := 2 dct st = 13200 mm
Depth of tension steel for crack control 2
1
3
Zactt := 0.6fy ( dct At) = 18193
Quantity limiting distribution of flexural reinforcement kN
Check for Shear m
OUTPUT SUMMARY
Bottom Reinforcement Checks Top Reinforcement Checks
R1 = "Compression steel is not required" R5 = "Compression steel is not required"
R2 = "Reinforcement provided is more than min-OK" R6 = "Reinforcement provided is more than min-OK"
R3 = "Reinforcement provided is OK for flexure" R7 = "Reinforcement provided is OK for flexure"
R4 = "Spacing between the reinforcement is OK" R8 = "Spacing between the top reinforcement is OK"
Shear Check R9 = "Shear Capacity is OK"
DESIGN OF 250 THK SLABS
TWAS_S~1.sdb 19-09-2017
-240 -180 -120 -60 0 60 120 180 240 300 360 420 480 540
SAP2000 18.1.1 Resultant M11 Diagram (STRENGTH ENV - Max) KN, m, C
TWAS_S~1.sdb 19-09-2017
-70 0 70 140 210 280 350 420 490 560 630 700 770 840
SAP2000 18.1.1 Resultant M22 Diagram (STRENGTH ENV - Max) KN, m, C
TWAS_S~1.sdb 19-09-2017
-0.24 0.00 0.24 0.48 0.72 0.96 1.20 1.44 1.68 1.92 2.16 2.40 2.64 2.88 E+3
SAP2000 18.1.1 Resultant V13 Diagram (STRENGTH ENV - Max) KN, m, C
TWAS_S~1.sdb 19-09-2017
0.00 0.35 0.70 1.05 1.40 1.75 2.10 2.45 2.80 3.15 3.50 3.85 4.20 4.55 E+3
SAP2000 18.1.1 Resultant V23 Diagram (STRENGTH ENV - Max) KN, m, C
Owner: Twas Computed By: SN
Plant: Twas Building Date: 08.09.17
Unit: Lift shaft-250 thick slabs Verified By: NVN
Project/File No.: 181344 Date:
Title: RCC Slab Design Sheet Page: 1
Input Parameters
Overall thickness of slab h := 250mm Clear cover to main reinforcement c := 25mm
Clear shorter span of the slab lx := 3.5m Width of the beam supporting slab bw := 170mm
Clear longer span of the slab ly := 4.265m Dpth of the beam supporting slab hb := 310mm
Specify the type of slab type := 1 Enter the row number of the slab type from table
For example, enter type = 1 for one-way slab
Specify the type of spanning of slab span := 1 Enter the row number of the support.
For example, enter span = 4 for Cantilever
kN
Specified compressive strength of concrete fc := 30MPa Density of concrete := 23.5
3
m
Specified yield strength of reinforcement fy := 400MPa
Modulus of Elasticity Es := 200000MPa
Resistance factor for concrete (cl.8.4.2) c := 0.65
kNm
Resistance factor for reinforcing bar (cl.8.4.3) s := 0.85 Factored Moment-Top/Support Mt := 73
m
kNm
Factored Moment-Bottom/Sagging Mb := 73 Factored Shear Force kN
m Vf := 70
m
Provided Reinforcement Asb1 2 Ast1 2
mm mm
Asb := = 1500 Ast := = 1500
sb m st m
Design for Flexure-Bottom/Sagging Moment Refer page no. 184 & 187
dfb
Effective Depth to tension steel db := h c = 215.25 mm
2
Asb
Percentage of steel provided b := = 0.007
db
Resistance factor fy
Krb := 1 s b f = 2.191 MPa
( 2 c 1 fc) b s y
2 kN m
Actual nominal flexural strength Mrb := Krb db = 101
m
Resistance factor fy
Krt := 1 s t f = 2.191 MPa
( 2 c 1 fc) t s y
2 m
Actual nominal flexural strength Mrt := Krt dt = 101.5 kN
m
Check for crack control parameter (CSA A23.3-14, cl.10.6.1)
dft 2
dct := min ( c , 50mm) + = 34.75 mm At := 2 dct st = 13900 mm
Depth of tension steel for crack control 2
1
3
Zactt := 0.6fy ( dct At) = 18831
Quantity limiting distribution of flexural reinforcement kN
Check for Shear m
OUTPUT SUMMARY
Bottom Reinforcement Checks Top Reinforcement Checks
R1 = "Compression steel is not required" R5 = "Compression steel is not required"
R2 = "Reinforcement provided is more than min-OK" R6 = "Reinforcement provided is more than min-OK"
R3 = "Reinforcement provided is OK for flexure" R7 = "Reinforcement provided is OK for flexure"
R4 = "Spacing between the reinforcement is OK" R8 = "Spacing between the top reinforcement is OK"
Shear Check R9 = "Shear Capacity is OK"
DESIGN OF LIFT LOBBY BEAMS
19-09-2017
KN, m, C
25.76
-34.97
-30.64 -21.5
18.7
-23.56 15.4
-20.54
-18.42 12.49
-19.67
-17.99
-44.67 29.72
-11.05 -46.36 -9.05
21.25
21.29 -39.32 -6.41
18.79
18.54 14.4
14.5
-7.13
9
29.99
30.01
-39.8 -38.33
26.65
26.73 4
20.48
-30.8
40.58
28.134
-22.0 25.786
-20.6 21.472
-15.2 5
51.1 21.49 21.63 14.44
-4.79 52.49 -4.772
21.7 22.09 19.56
-1.8 22.21
51.18 16.27
SAP2000 18.1.1
TWAS_S~1.sdb
19-09-2017
KN, m, C
34.75 35.95 29.91 23.57
46.64
-19.52 21.15
-46.35 21.21
-40.95 -37.72
21.19
20.42 31.15 19.03 22.28 20.55 20.21 -3.8
16.03
33.2 32.05 28.59
22.3
-5.04 18.79
-5.19 -2.996
16.2 9
-3.92
11.7
31.3 3
-4.69 -3.23
29.1 4 24.89
-0.44
16.9 2
-10.9 14.8 5
-10.3 -7.834
12.1 -5.83
8.96
-10.893
27.5 -8.37
24.4 9 6
-4.81
20.1
SAP2000 18.1.1
TWAS_S~1.sdb
Owner:ABTP
Owner: York Region ComputedbyBy:
Computed Sachin Agarwal
: SN
Plant:TWAS
Plant: Upper York Sewage Servicing Date:18.09.17
Date: 4th Oct-2016
Unit:
Unit:Lift shaft
Advanced Treatment Building Verified
Verifiedby: Nagaraju
By: NV NV
Nagaraju
Project no. 181344
Project/File No.: 184780 Date:
Date:18.09.17
5th-Oct-2016
Title:
Title:Beam
RCCdesign
Beam350x400
Design Sheet Page: 1 of 9
Revision: 1.0
Beam definition
Beam width b := 300mm
Overall beam depth h := 450mm
Clear span of beam l := 4.5m
Clear cover to stirrup c := 35mm
Span type SupportVector :=
1
Support 2 length & depth
Allowable ratio of
1 "Simply Supported" 16
2 "One End Continuous" 18
3 "Both ends continuous" 21
4 "Cantilever" 8
Specify the type of spanning of beam span := 1 Enter the row number of the support.
For example, enter span = 4 for Cantilever
ExposureVector :=
Exposure type
1
Exposure 2
bc 3
b_c 4
skin
1 "Interior" 50 40 810-3
2 "Exterior" 40 30 0.01
Specify the type of Exposure exp := 2 Enter the row number of the exposure.
For example, enter span = 1 for Interior
Reinforcement dia table ReinfdiaVector :=
1
Reinf. 2
Diameter
1 "10M" 11.3
2 "15M" 16
3 "20M" 19.5
4 "25M" 25.2
5 "30M" 29.9
6 "35M" 35.7
7 "45M" 43.7
8 "55M" 56.4
Owner:
Owner: ABTPYork Region ComputedbyBy:
Computed : SNSachin Agarwal
Plant: TWAS
Plant: Upper York Sewage Servicing Date:18.09.17
Date: 4th Oct-2016
Unit:Unit:
Lift shaft
Advanced Treatment Building Verified
Verifiedby: Nagaraju
By: NV NV
Nagaraju
Project no. 181344No.: 184780
Project/File Date:
Date:18.09.17
5th-Oct-2016
Title: Beam design 350x400
Title: RCC Beam Design Sheet Page: 2 of 9
Revision: 1.0
Check for minimum clear distance between bars in tension (CSA A23.3-14, Annexure A- cl.6.6.5.2)
[ b 2 ( c + ds) nb dfb]
Actual clear distance between bars Sbarsb := Sbarsb = 74.45 mm
( nb 1)
Min nominal cover based on bar diameter c1b := 1.4 dfb c1b = 27.3 mm
Min nominal cover based on aggregate size c2 := 1.4 a_max c2 = 35 mm
Allowable minimum clear distance between bars Sminb := max( c1b , c2 , 30mm) Sminb = 35 mm
R4 := if ( Sminb < Sbarsb , "Spacing between the bars is OK" , "Reduce the no. of bars-NOT OK" )
R4 = "Spacing between the bars is OK"
Check for crack control parameter (CSA A23.3-14, cl.10.6.1)
dfb
Depth of tension steel for crack control dcb := min ( c , 50mm) + + ds dcb = 56.05 mm
2
b 2
Ab := 2 dcb Ab = 11210 mm
nb
1
3
Zactb := 0.6 fy ( dcb Ab)
Quantity limiting distribution of flexural reinforcement Equation 10.6-CSA A23.3-14
1
Zactb = 20555.99 m kN
kN
Zall := 30000
m
R5 := if ( Zactb < Zall , "Spacing between the bottom reinforcement is OK" , "Reduce the no. of bars-NOT OK" )
R5 = "Spacing between the bottom reinforcement is OK"
Owner:
Owner:ABTP York Region Computed by
Computed : SN
By: Sachin Agarwal
Plant:
Plant:TWAS
Upper York Sewage Servicing Date: 18.09.17
Date: 4th Oct-2016
Unit:
Unit:Lift shaft
Advanced Treatment Building Verified by:
Verified By:Nagaraju
NagarajuNVNV
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 350x400
Title: RCC Beam Design Sheet Page: 5 of 9
Revision: 1.0
Kr_t := 1 s _t fy 1 _t s fy
Resistance factor MPa
( 2 c 1 fc)
Kr_t = 2.366 MPa
2
Actual nominal flexural strength Mr_t := Kr_t b dt Mr_t = 110.2 kNm
R8 := if ( Mr_t > Mft , "Reinforcement provided is OK for flexure" , "Increase top flexural reinforcment-NOT OK" )
R8 = "Reinforcement provided is OK for flexure"
Check for minimum clear distance between bars in tension
[ b 2 ( c + ds) nt dft]
Actual clear distance between bars Sbarst := Sbarst = 74.45 mm
( nt 1)
Min nominal cover based on bar diameter c1t := 1.4 dft c1t = 27.3 mm
Min nominal cover based on aggregate size c2 := 1.4 a_max c2 = 35 mm
Allowable minimum clear distance between bars Smint := max( c1b , c2 , 30mm) Smint = 35 mm
R9 := if ( Smint < Sbarst , "Spacing between the bars is OK" , "Reduce the no. of bars-NOT OK" )
R9 = "Spacing between the bars is OK"
Owner:
Owner: ABTPYork Region Computed
Computed byBy:
: SNSachin Agarwal
Plant:
Plant:TWAS
Upper York Sewage Servicing Date:
Date:18.09.17
4th Oct-2016
Unit: Lift shaft Verified
Unit: Advanced Treatment Building
Project no. 181344
Verifiedby: Nagaraju
By: NV NV
Nagaraju
Date: 18.09.17
Project/File
Title: No.:
Beam design 184780
350x400 Date: 5th-Oct-2016
Title: RCC Beam Design Sheet Page: 6 of 9
Revision: 1.0
1
3
Zactt := 0.6 fy ( dct At)
Quantity limiting distribution of flexural reinforcement Equation 10.6-CSA A23.3-14
1
Zactt = 20555.99 m kN
kN
Zall := 25000
m
R10 := if ( Zactt < Zall , "Spacing between the top reinforcement is OK" , "Reduce the spacing of top reinforcment-NOT OK"
R10 = "Spacing between the top reinforcement is OK"
kd :=
( 2 db B + 1 1)
kd = 116.1 mm
B
Owner:
Owner:ABTP York Region Computed by
Computed : SN
By: Sachin Agarwal
Plant:
Plant:TWAS
Upper York Sewage Servicing Date: 18.09.17
Date: 4th Oct-2016
Unit:
Unit:Lift shaft
Advanced Treatment Building Verified by:
Verified By:Nagaraju
NagarajuNVNV
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 350x400
Title: RCC Beam Design Sheet Page: 8 of 9
Revision: 1.0
3 2
Cracked Moment of Inertia b kd + 3 n As_prov_b ( db kd) 4
Icr := Icr = 0.000718 m
3
2Ig
Cracking Moment Mcr := fr Mcr = 33.274 kNm
h
Mfb
Actual Service Moment Ma := Ma = 40 kNm
1.4
3
Ie := min Icr + ( Ig Icr)
Mcr 4
Effective Moment of Inertia , Ig Ie = 0.001616 m
Ma
Ig
Actual Deflection f := ( 1 + 2) f = 4.715 mm
Ie
l
Allowable Deflection all := all = 18.75 mm
a
R15 := if ( f < all , "Deflection is within Limit-OK" , "Deflection is high-NOT OK" )
R15 = "Deflection is within Limit-OK"
2.8 Check for Skin Reinforcement
As per cl10.6.2 in CSA A23.3-14, skin reinforcement is required only if the beam depth is more than 750 mm
Percentage of steel required s := ExposureVectorexp , 4 s = 0.01
Concrete face to the centre of the reinforcement x := c + ds + dk x = 62.3 mm
b > x , "PASS" , "Failed Increase Reinforcement" = "PASS"
if
4
h 2 c 2 ds dfb dft
sk :=
Actual spacing between the skin reinforcement 2 2
sk = 84.5 mm
nk + 1
R16 := if ( sk < 200mm , "Pass-Spacing is OK" , "Increase no. of bars-NOT OK" )
R16 = "Pass-Spacing is OK"
R17 := if ( Ask < Askpro , "Pass-Reinforcement is OK" , "Increase the reinforcement-NOT OK" )
R17 = "Pass-Reinforcement is OK"
Owner:
Owner: ABTP
York Region Computed
Computed byBy:
: SNSachin Agarwal
Plant:
Plant: TWASUpper York Sewage Servicing Date:
Date:18.09.17
4th Oct-2016
Unit:
Unit: LiftAdvanced
shaft Treatment Building Verified
Verifiedby: Nagaraju
By: NV NV
Nagaraju
Project no. 181344 Date:
Project/File No.: 184780 Date:18.09.17
5th-Oct-2016
Title: Beam design 350x400
Title: RCC Beam Design Sheet Page: 9 of 9
Revision: 1.0
2.9 Summary
Bottom Reinforcement Checks
R1 = "Compression Steel is not Required"
R2 = "Reinforcement provided is more than min-OK"
R3 = "Reinforcement provided is OK for flexure"
R4 = "Spacing between the bars is OK"
R5 = "Spacing between the bottom reinforcement is OK"
Top Reinforcement Checks
R6 = "Compression steel is not required"
R7 = "Reinforcement provided is more than min-OK"
R8 = "Reinforcement provided is OK for flexure"
R9 = "Spacing between the bars is OK"
R10 = "Spacing between the top reinforcement is OK"
Shear Check
R11 = "Shear rings spacing is OK"
R12 = "Shear Capacity is OK"
Miscellaneous Check
R13 = "Clear Cover is OK"
R14 = "Span/Depth ratio is OK"
Thickness Check
R15 = "Deflection is within Limit-OK"
Skin Reinforcement Check
R16 = "Pass-Spacing is OK"
R17 = "Pass-Reinforcement is OK"
DESIGN OF LIFT SHAFT BEAMS
TWAS_S~1.sdb 19-09-2017
-84.52
400x400
45.31
400x10
25
111.5
-124.
101.78
400x
845
-116.42
-95.34
400
x1 195
94.27
94.46
400x400
-96.01
136.72
400x10
25
-139.27
131.05
400x
845
-131.37
127.3
400
x1 195
-124.12
Beam definition
Beam width b := 400mm
Overall beam depth h := 400mm
Clear span of beam l := 4.5m
Clear cover to stirrup c := 35mm
Span type SupportVector :=
1
Support 2 length & depth
Allowable ratio of
1 "Simply Supported" 16
2 "One End Continuous" 18
3 "Both ends continuous" 21
4 "Cantilever" 8
Specify the type of spanning of beam span := 1 Enter the row number of the support.
For example, enter span = 4 for Cantilever
ExposureVector :=
Exposure type
1
Exposure 2
bc 3
b_c 4
skin
1 "Interior" 50 40 810-3
2 "Exterior" 40 30 0.01
Specify the type of Exposure exp := 2 Enter the row number of the exposure.
For example, enter span = 1 for Interior
Reinforcement dia table ReinfdiaVector :=
1
Reinf. 2
Diameter
1 "10M" 11.3
2 "15M" 16
3 "20M" 19.5
4 "25M" 25.2
5 "30M" 29.9
6 "35M" 35.7
7 "45M" 43.7
8 "55M" 56.4
Owner:
Owner:ABTPYork Region Computed by
Computed : SN
By: Sachin Agarwal
Plant:
Plant:TWAS
Upper York Sewage Servicing Date: 18.09.17
Date: 4th Oct-2016
Unit:
Unit:Lift shaft
Advanced Treatment Building Verified by:
Verified By:Nagaraju
NagarajuNVNV
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x400
Title: RCC Beam Design Sheet Page: 2 of 9
Revision: 1.0
Check for minimum clear distance between bars in tension (CSA A23.3-14, Annexure A- cl.6.6.5.2)
[ b 2 ( c + ds) nb dfb]
Actual clear distance between bars Sbarsb := Sbarsb = 124.45 mm
( nb 1)
Min nominal cover based on bar diameter c1b := 1.4 dfb c1b = 27.3 mm
Min nominal cover based on aggregate size c2 := 1.4 a_max c2 = 35 mm
Allowable minimum clear distance between bars Sminb := max( c1b , c2 , 30mm) Sminb = 35 mm
R4 := if ( Sminb < Sbarsb , "Spacing between the bars is OK" , "Reduce the no. of bars-NOT OK" )
R4 = "Spacing between the bars is OK"
Check for crack control parameter (CSA A23.3-14, cl.10.6.1)
dfb
Depth of tension steel for crack control dcb := min ( c , 50mm) + + ds dcb = 56.05 mm
2
b 2
Ab := 2 dcb Ab = 14946.667 mm
nb
1
3
Zactb := 0.6 fy ( dcb Ab)
Quantity limiting distribution of flexural reinforcement Equation 10.6-CSA A23.3-14
1
Zactb = 22624.79 m kN
kN
Zall := 30000
m
R5 := if ( Zactb < Zall , "Spacing between the bottom reinforcement is OK" , "Reduce the no. of bars-NOT OK" )
R5 = "Spacing between the bottom reinforcement is OK"
Owner:
Owner:ABTP York Region Computed by
Computed : SN
By: Sachin Agarwal
Plant:
Plant:TWAS
Upper York Sewage Servicing Date: 18.09.17
Date: 4th Oct-2016
Unit:
Unit:Lift shaft
Advanced Treatment Building Verified by:
Verified By:Nagaraju
NagarajuNVNV
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x400
Title: RCC Beam Design Sheet Page: 5 of 9
Revision: 1.0
Kr_t := 1 s _t fy 1 _t s fy
Resistance factor MPa
( 2 c 1 fc)
Kr_t = 2.058 MPa
2
Actual nominal flexural strength Mr_t := Kr_t b dt Mr_t = 97.4 kNm
R8 := if ( Mr_t > Mft , "Reinforcement provided is OK for flexure" , "Increase top flexural reinforcment-NOT OK" )
R8 = "Reinforcement provided is OK for flexure"
Check for minimum clear distance between bars in tension
[ b 2 ( c + ds) nt dft]
Actual clear distance between bars Sbarst := Sbarst = 124.45 mm
( nt 1)
Min nominal cover based on bar diameter c1t := 1.4 dft c1t = 27.3 mm
Min nominal cover based on aggregate size c2 := 1.4 a_max c2 = 35 mm
Allowable minimum clear distance between bars Smint := max( c1b , c2 , 30mm) Smint = 35 mm
R9 := if ( Smint < Sbarst , "Spacing between the bars is OK" , "Reduce the no. of bars-NOT OK" )
R9 = "Spacing between the bars is OK"
Owner:
Owner: ABTP
York Region Computed by
Computed : SN
By: Sachin Agarwal
Plant:
Plant: TWAS
Upper York Sewage Servicing Date: 18.09.17
Date: 4th Oct-2016
Unit:
Unit:LiftAdvanced
shaft Treatment Building Verified by:
Verified By:Nagaraju
NagarajuNVNV
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x400
Title: RCC Beam Design Sheet Page: 6 of 9
Revision: 1.0
1
3
Zactt := 0.6 fy ( dct At)
Quantity limiting distribution of flexural reinforcement Equation 10.6-CSA A23.3-14
1
Zactt = 22624.79 m kN
kN
Zall := 25000
m
R10 := if ( Zactt < Zall , "Spacing between the top reinforcement is OK" , "Reduce the spacing of top reinforcment-NOT OK"
R10 = "Spacing between the top reinforcement is OK"
kd :=
( 2 db B + 1 1)
kd = 95.1 mm
B
Owner:
Owner: ABTP
York Region Computed
Computed byBy:
: SNSachin Agarwal
Plant:
Plant:TWASUpper York Sewage Servicing Date:
Date:18.09.17
4th Oct-2016
Unit:
Unit:LiftAdvanced
shaft Treatment Building Verified
Verifiedby:By:
Nagaraju NV NV
Nagaraju
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x400
Title: RCC Beam Design Sheet Page: 8 of 9
Revision: 1.0
3 2
Cracked Moment of Inertia b kd + 3 n As_prov_b ( db kd) 4
Icr := Icr = 0.000565 m
3
2Ig
Cracking Moment Mcr := fr Mcr = 35.054 kNm
h
Mfb
Actual Service Moment Ma := Ma = 32.357 kNm
1.4
3
Ie := min Icr + ( Ig Icr)
Mcr 4
Effective Moment of Inertia , Ig Ie = 0.002133 m
Ma
Ig
Actual Deflection f := ( 1 + 2) f = 3.631 mm
Ie
l
Allowable Deflection all := all = 18.75 mm
a
R15 := if ( f < all , "Deflection is within Limit-OK" , "Deflection is high-NOT OK" )
R15 = "Deflection is within Limit-OK"
2.8 Check for Skin Reinforcement
As per cl10.6.2 in CSA A23.3-14, skin reinforcement is required only if the beam depth is more than 750 mm
Percentage of steel required s := ExposureVectorexp , 4 s = 0.01
Concrete face to the centre of the reinforcement x := c + ds + dk x = 62.3 mm
b > x , "PASS" , "Failed Increase Reinforcement" = "PASS"
if
4
h 2 c 2 ds dfb dft
sk :=
Actual spacing between the skin reinforcement 2 2
sk = 72 mm
nk + 1
R16 := if ( sk < 200mm , "Pass-Spacing is OK" , "Increase no. of bars-NOT OK" )
R16 = "Pass-Spacing is OK"
R17 := if ( Ask < Askpro , "Pass-Reinforcement is OK" , "Increase the reinforcement-NOT OK" )
R17 = "Pass-Reinforcement is OK"
Owner:
Owner:ABTPYork Region Computed by
Computed : SN
By: Sachin Agarwal
Plant:
Plant:TWAS
Upper York Sewage Servicing Date: 18.09.17
Date: 4th Oct-2016
Unit:
Unit:Lift shaft
Advanced Treatment Building Verified by:
Verified By:Nagaraju
NagarajuNVNV
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x400
Title: RCC Beam Design Sheet Page: 9 of 9
Revision: 1.0
2.9 Summary
Bottom Reinforcement Checks
R1 = "Compression Steel is not Required"
R2 = "Reinforcement provided is more than min-OK"
R3 = "Reinforcement provided is OK for flexure"
R4 = "Spacing between the bars is OK"
R5 = "Spacing between the bottom reinforcement is OK"
Top Reinforcement Checks
R6 = "Compression steel is not required"
R7 = "Reinforcement provided is more than min-OK"
R8 = "Reinforcement provided is OK for flexure"
R9 = "Spacing between the bars is OK"
R10 = "Spacing between the top reinforcement is OK"
Shear Check
R11 = "Shear rings spacing is OK"
R12 = "Shear Capacity is OK"
Miscellaneous Check
R13 = "Clear Cover is OK"
R14 = "Span/Depth ratio is OK"
Thickness Check
R15 = "Deflection is within Limit-OK"
Skin Reinforcement Check
R16 = "Pass-Spacing is OK"
R17 = "Pass-Reinforcement is OK"
BEAM SIZE 400X1025
Owner:
Owner:ABTP York Region Computed by
Computed : SN
By: Sachin Agarwal
Plant:
Plant:TWAS
Upper York Sewage Servicing Date: 18.09.17
Date: 4th Oct-2016
Unit:
Unit:Lift shaft
Advanced Treatment Building Verified by:
Verified By:Nagaraju
NagarajuNVNV
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x1025
Title: RCC Beam Design Sheet Page: 1 of 9
Revision: 1.0
Beam definition
Beam width b := 400mm
Overall beam depth h := 1025mm
Clear span of beam l := 4.5m
Clear cover to stirrup c := 35mm
Span type SupportVector :=
1
Support 2 length & depth
Allowable ratio of
1 "Simply Supported" 16
2 "One End Continuous" 18
3 "Both ends continuous" 21
4 "Cantilever" 8
Specify the type of spanning of beam span := 1 Enter the row number of the support.
For example, enter span = 4 for Cantilever
ExposureVector :=
Exposure type
1
Exposure 2
bc 3
b_c 4
skin
1 "Interior" 50 40 810-3
2 "Exterior" 40 30 0.01
Specify the type of Exposure exp := 2 Enter the row number of the exposure.
For example, enter span = 1 for Interior
Reinforcement dia table ReinfdiaVector :=
1
Reinf. 2
Diameter
1 "10M" 11.3
2 "15M" 16
3 "20M" 19.5
4 "25M" 25.2
5 "30M" 29.9
6 "35M" 35.7
7 "45M" 43.7
8 "55M" 56.4
Owner:
Owner: York Region
ABTP Computed
Computed by By: Sachin Agarwal
: SN
Plant:
Plant:TWAS
Upper York Sewage Servicing Date: 18.09.17
Date: 4th Oct-2016
Unit:
Unit:Lift shaft
Advanced Treatment Building Verified by:
Verified By:Nagaraju
NagarajuNVNV
Project no. 181344
Project/File No.: 184780 Date: 18.09.17
Date: 5th-Oct-2016
Title: Beam design 400x1025
Title: RCC Beam Design Sheet Page: 2 of 9
Revision: 1.0
Check for minimum clear distance between bars in tension (CSA A23.3-14, Annexure A- cl.6.6.5.2)
[ b 2 ( c + ds) nb dfb]
Actual clear distance between bars Sbarsb := Sbarsb = 115.9 mm
( nb 1)
Min nominal cover based on bar diameter c1b := 1.4 dfb c1b = 35.28 mm
Min nominal cover based on aggregate size c2 := 1.4 a_max c2 = 35 mm
Allowable minimum clear distance between bars Sminb := max( c1b , c2 , 30mm) Sminb = 35.28 mm
R4 := if ( Sminb < Sbarsb , "Spacing between the bars is OK" , "Reduce the no. of bars-NOT OK" )
R4 = "Spacing between the bars is OK"
Check for crack control parameter (CSA A23.3-14, cl.10.6.1)
dfb
Depth of tension steel for crack control dcb := min ( c , 50mm) + + ds dcb = 58.9 mm
2
b 2
Ab := 2 dcb Ab = 15706.667 mm
nb
1
3
Zactb := 0.6 fy ( dcb Ab)
Quantity limiting distribution of flexural reinforcement Equation 10.6-CSA A23.3-14
1
Zactb = 23385.38 m kN
kN
Zall := 30000
m
R5 := if ( Zactb < Zall , "Spacing between the bottom reinforcement is OK" , "Reduce the no. of bars-NOT OK" )
R5 = "Spacing between the bottom reinforcement is OK"
Owner:
Owner: ABTP
York Region Computed
Computed byBy:
: SNSachin Agarwal
Plant:
Plant:TWASUpper York Sewage Servicing Date:
Date:18.09.17
4th Oct-2016
Unit:
Unit:LiftAdvanced
shaft Treatment Building Verified
Verifiedby:By:
Nagaraju NV NV
Nagaraju
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x1025
Title: RCC Beam Design Sheet Page: 5 of 9
Revision: 1.0
Kr_t := 1 s _t fy 1 _t s fy
Resistance factor MPa
( 2 c 1 fc)
Kr_t = 1.261 MPa
2
Actual nominal flexural strength Mr_t := Kr_t b dt Mr_t = 470.9 kNm
R8 := if ( Mr_t > Mft , "Reinforcement provided is OK for flexure" , "Increase top flexural reinforcment-NOT OK" )
R8 = "Reinforcement provided is OK for flexure"
Check for minimum clear distance between bars in tension
[ b 2 ( c + ds) nt dft]
Actual clear distance between bars Sbarst := Sbarst = 115.9 mm
( nt 1)
Min nominal cover based on bar diameter c1t := 1.4 dft c1t = 35.28 mm
Min nominal cover based on aggregate size c2 := 1.4 a_max c2 = 35 mm
Allowable minimum clear distance between bars Smint := max( c1b , c2 , 30mm) Smint = 35.28 mm
R9 := if ( Smint < Sbarst , "Spacing between the bars is OK" , "Reduce the no. of bars-NOT OK" )
R9 = "Spacing between the bars is OK"
Owner:
Owner: ABTPYork Region Computed
Computed byBy:
: SNSachin Agarwal
Plant:
Plant:TWASUpper York Sewage Servicing Date:
Date:18.09.17
4th Oct-2016
Unit: Lift shaft Verified by: Nagaraju NV
Unit: Advanced Treatment Building Verified By: Nagaraju NV
Project no. 181344 Date: 18.09.17
Project/File
Title: No.:
Beam design 184780
400x1025 Date: 5th-Oct-2016
Title: RCC Beam Design Sheet Page: 6 of 9
Revision: 1.0
1
3
Zactt := 0.6 fy ( dct At)
Quantity limiting distribution of flexural reinforcement Equation 10.6-CSA A23.3-14
1
Zactt = 23385.38 m kN
kN
Zall := 25000
m
R10 := if ( Zactt < Zall , "Spacing between the top reinforcement is OK" , "Reduce the spacing of top reinforcment-NOT OK"
R10 = "Spacing between the top reinforcement is OK"
kd :=
( 2 db B + 1 1)
kd = 213.7 mm
B
Owner:
Owner: ABTP
York Region Computed
ComputedbyBy: : SNSachin Agarwal
Plant:
Plant: TWASUpper York Sewage Servicing Date:
Date:18.09.17
4th Oct-2016
Unit:
Unit: LiftAdvanced
shaft Treatment Building Verified
Verifiedby: Nagaraju
By: NV NV
Nagaraju
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x1025
Title: RCC Beam Design Sheet Page: 8 of 9
Revision: 1.0
3 2
Cracked Moment of Inertia b kd + 3 n As_prov_b ( db kd) 4
Icr := Icr = 0.008175 m
3
2Ig
Cracking Moment Mcr := fr Mcr = 230.18 kNm
h
Mfb
Actual Service Moment Ma := Ma = 79.643 kNm
1.4
3
Ie := min Icr + ( Ig Icr)
Mcr 4
Effective Moment of Inertia , Ig Ie = 0.035896 m
Ma
Ig
Actual Deflection f := ( 1 + 2) f = 0.251 mm
Ie
l
Allowable Deflection all := all = 18.75 mm
a
R15 := if ( f < all , "Deflection is within Limit-OK" , "Deflection is high-NOT OK" )
R15 = "Deflection is within Limit-OK"
2.8 Check for Skin Reinforcement
As per cl10.6.2 in CSA A23.3-14, skin reinforcement is required only if the beam depth is more than 750 mm
Percentage of steel required s := ExposureVectorexp , 4 s = 0.01
Concrete face to the centre of the reinforcement x := c + ds + dk x = 62.3 mm
b > x , "PASS" , "Failed Increase Reinforcement" =
if
4
h 2 c 2 ds dfb dft
sk :=
Actual spacing between the skin reinforcement 2 2
sk = 151.2 mm
nk + 1
R16 := if ( sk < 200mm , "Pass-Spacing is OK" , "Increase no. of bars-NOT OK" )
R16 = "Pass-Spacing is OK"
R17 := if ( Ask < Askpro , "Pass-Reinforcement is OK" , "Increase the reinforcement-NOT OK" )
R17 = "Pass-Reinforcement is OK"
Owner:
Owner: ABTPYork Region Computed
Computed by By:
: SN Sachin Agarwal
Plant: TWAS
Plant: Upper York Sewage Servicing Date:
Date:18.09.17
4th Oct-2016
Unit: Lift Advanced
Unit: shaft Treatment Building Verified
Verifiedby:By:
Nagaraju NV NV
Nagaraju
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x1025
Title: RCC Beam Design Sheet Page: 9 of 9
Revision: 1.0
2.9 Summary
Bottom Reinforcement Checks
R1 = "Compression Steel is not Required"
R2 = "Reinforcement provided is more than min-OK"
R3 = "Reinforcement provided is OK for flexure"
R4 = "Spacing between the bars is OK"
R5 = "Spacing between the bottom reinforcement is OK"
Top Reinforcement Checks
R6 = "Compression steel is not required"
R7 = "Reinforcement provided is more than min-OK"
R8 = "Reinforcement provided is OK for flexure"
R9 = "Spacing between the bars is OK"
R10 = "Spacing between the top reinforcement is OK"
Shear Check
R11 = "Shear rings spacing is OK"
R12 = "Shear Capacity is OK"
Miscellaneous Check
R13 = "Clear Cover is OK"
R14 = "Span/Depth ratio is OK"
Thickness Check
R15 = "Deflection is within Limit-OK"
Skin Reinforcement Check
R16 = "Pass-Spacing is OK"
R17 = "Pass-Reinforcement is OK"
BEAM SIZE 400X845
Owner:
Owner: ABTPYork Region Computed
Computed by : By:
SN Sachin Agarwal
Plant: TWAS
Plant: Upper York Sewage Servicing Date: 18.09.17
Date: 4th Oct-2016
Unit: Lift shaft
Unit: Advanced Treatment Building Verified by: By:
Verified Nagaraju NV NV
Nagaraju
Project no. 181344
Project/File No.: 184780 Date: 18.09.17
Date: 5th-Oct-2016
Title: Beam design 400x845
Title: RCC Beam Design Sheet Page: 1 of 9
Revision: 1.0
Beam definition
Beam width b := 400mm
Overall beam depth h := 845mm
Clear span of beam l := 4.5m
Clear cover to stirrup c := 35mm
Span type SupportVector :=
1
Support 2 length & depth
Allowable ratio of
1 "Simply Supported" 16
2 "One End Continuous" 18
3 "Both ends continuous" 21
4 "Cantilever" 8
Specify the type of spanning of beam span := 1 Enter the row number of the support.
For example, enter span = 4 for Cantilever
ExposureVector :=
Exposure type
1
Exposure 2
bc 3
b_c 4
skin
1 "Interior" 50 40 810-3
2 "Exterior" 40 30 0.01
Specify the type of Exposure exp := 2 Enter the row number of the exposure.
For example, enter span = 1 for Interior
Reinforcement dia table ReinfdiaVector :=
1
Reinf. 2
Diameter
1 "10M" 11.3
2 "15M" 16
3 "20M" 19.5
4 "25M" 25.2
5 "30M" 29.9
6 "35M" 35.7
7 "45M" 43.7
8 "55M" 56.4
Owner:
Owner: ABTP
York Region Computed by
Computed : SN
By: Sachin Agarwal
Plant:
Plant: TWAS
Upper York Sewage Servicing Date: 18.09.17
Date: 4th Oct-2016
Unit:
Unit:LiftAdvanced
shaft Treatment Building Verified by:
Verified By:Nagaraju
NagarajuNVNV
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x845
Title: RCC Beam Design Sheet Page: 2 of 9
Revision: 1.0
Check for minimum clear distance between bars in tension (CSA A23.3-14, Annexure A- cl.6.6.5.2)
[ b 2 ( c + ds) nb dfb]
Actual clear distance between bars Sbarsb := Sbarsb = 115.9 mm
( nb 1)
Min nominal cover based on bar diameter c1b := 1.4 dfb c1b = 35.28 mm
Min nominal cover based on aggregate size c2 := 1.4 a_max c2 = 35 mm
Allowable minimum clear distance between bars Sminb := max( c1b , c2 , 30mm) Sminb = 35.28 mm
R4 := if ( Sminb < Sbarsb , "Spacing between the bars is OK" , "Reduce the no. of bars-NOT OK" )
R4 = "Spacing between the bars is OK"
Check for crack control parameter (CSA A23.3-14, cl.10.6.1)
dfb
Depth of tension steel for crack control dcb := min ( c , 50mm) + + ds dcb = 58.9 mm
2
b 2
Ab := 2 dcb Ab = 15706.667 mm
nb
1
3
Zactb := 0.6 fy ( dcb Ab)
Quantity limiting distribution of flexural reinforcement Equation 10.6-CSA A23.3-14
1
Zactb = 23385.38 m kN
kN
Zall := 30000
m
R5 := if ( Zactb < Zall , "Spacing between the bottom reinforcement is OK" , "Reduce the no. of bars-NOT OK" )
R5 = "Spacing between the bottom reinforcement is OK"
Owner:
Owner:ABTP York Region Computed by
Computed : SN
By: Sachin Agarwal
Plant:
Plant:TWAS
Upper York Sewage Servicing Date: 18.09.17
Date: 4th Oct-2016
Unit:
Unit:Lift shaft
Advanced Treatment Building Verified by:
Verified By:Nagaraju
NagarajuNVNV
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x845
Title: RCC Beam Design Sheet Page: 5 of 9
Revision: 1.0
Kr_t := 1 s _t fy 1 _t s fy
Resistance factor MPa
( 2 c 1 fc)
Kr_t = 1.535 MPa
2
Actual nominal flexural strength Mr_t := Kr_t b dt Mr_t = 379.3 kNm
R8 := if ( Mr_t > Mft , "Reinforcement provided is OK for flexure" , "Increase top flexural reinforcment-NOT OK" )
R8 = "Reinforcement provided is OK for flexure"
Check for minimum clear distance between bars in tension
[ b 2 ( c + ds) nt dft]
Actual clear distance between bars Sbarst := Sbarst = 115.9 mm
( nt 1)
Min nominal cover based on bar diameter c1t := 1.4 dft c1t = 35.28 mm
Min nominal cover based on aggregate size c2 := 1.4 a_max c2 = 35 mm
Allowable minimum clear distance between bars Smint := max( c1b , c2 , 30mm) Smint = 35.28 mm
R9 := if ( Smint < Sbarst , "Spacing between the bars is OK" , "Reduce the no. of bars-NOT OK" )
R9 = "Spacing between the bars is OK"
Owner:
Owner: ABTP
York Region Computed
Computed byBy:
: SNSachin Agarwal
Plant:
Plant:TWASUpper York Sewage Servicing Date:
Date:18.09.17
4th Oct-2016
Unit:
Unit:LiftAdvanced
shaft Treatment Building Verified
Verifiedby: Nagaraju
By: NV NV
Nagaraju
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x845
Title: RCC Beam Design Sheet Page: 6 of 9
Revision: 1.0
1
3
Zactt := 0.6 fy ( dct At)
Quantity limiting distribution of flexural reinforcement Equation 10.6-CSA A23.3-14
1
Zactt = 23385.38 m kN
kN
Zall := 25000
m
R10 := if ( Zactt < Zall , "Spacing between the top reinforcement is OK" , "Reduce the spacing of top reinforcment-NOT OK"
R10 = "Spacing between the top reinforcement is OK"
kd :=
( 2 db B + 1 1)
kd = 190.2 mm
B
Owner:
Owner:ABTPYork Region Computed by
Computed : SN
By: Sachin Agarwal
Plant:
Plant:TWAS
Upper York Sewage Servicing Date: 4th
Date: 18.09.17
Oct-2016
Unit:
Unit:Lift shaft
Advanced Treatment Building Verified by:
Verified By:Nagaraju
NagarajuNVNV
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x845
Title: RCC Beam Design Sheet Page: 8 of 9
Revision: 1.0
3 2
Cracked Moment of Inertia b kd + 3 n As_prov_b ( db kd) 4
Icr := Icr = 0.005229 m
3
2Ig
Cracking Moment Mcr := fr Mcr = 156.435 kNm
h
Mfb
Actual Service Moment Ma := Ma = 83.143 kNm
1.4
3
Ie := min Icr + ( Ig Icr)
Mcr 4
Effective Moment of Inertia , Ig Ie = 0.020112 m
Ma
Ig
Actual Deflection f := ( 1 + 2) f = 0.43 mm
Ie
l
Allowable Deflection all := all = 18.75 mm
a
R15 := if ( f < all , "Deflection is within Limit-OK" , "Deflection is high-NOT OK" )
R15 = "Deflection is within Limit-OK"
2.8 Check for Skin Reinforcement
As per cl10.6.2 in CSA A23.3-14, skin reinforcement is required only if the beam depth is more than 750 mm
Percentage of steel required s := ExposureVectorexp , 4 s = 0.01
Concrete face to the centre of the reinforcement x := c + ds + dk x = 62.3 mm
b > x , "PASS" , "Failed Increase Reinforcement" = "PASS"
if
4
h 2 c 2 ds dfb dft
sk :=
Actual spacing between the skin reinforcement 2 2
sk = 145.4 mm
nk + 1
R16 := if ( sk < 200mm , "Pass-Spacing is OK" , "Increase no. of bars-NOT OK" )
R16 = "Pass-Spacing is OK"
R17 := if ( Ask < Askpro , "Pass-Reinforcement is OK" , "Increase the reinforcement-NOT OK" )
R17 = "Pass-Reinforcement is OK"
Owner:
Owner:ABTP York Region Computed by
Computed : SN
By: Sachin Agarwal
Plant:
Plant:TWAS
Upper York Sewage Servicing Date: 18.09.17
Date: 4th Oct-2016
Unit:
Unit:Lift shaft
Advanced Treatment Building Verified by:
Verified By:Nagaraju
NagarajuNVNV
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x845
Title: RCC Beam Design Sheet Page: 9 of 9
Revision: 1.0
2.9 Summary
Bottom Reinforcement Checks
R1 = "Compression Steel is not Required"
R2 = "Reinforcement provided is more than min-OK"
R3 = "Reinforcement provided is OK for flexure"
R4 = "Spacing between the bars is OK"
R5 = "Spacing between the bottom reinforcement is OK"
Top Reinforcement Checks
R6 = "Compression steel is not required"
R7 = "Reinforcement provided is more than min-OK"
R8 = "Reinforcement provided is OK for flexure"
R9 = "Spacing between the bars is OK"
R10 = "Spacing between the top reinforcement is OK"
Shear Check
R11 = "Shear rings spacing is OK"
R12 = "Shear Capacity is OK"
Miscellaneous Check
R13 = "Clear Cover is OK"
R14 = "Span/Depth ratio is OK"
Thickness Check
R15 = "Deflection is within Limit-OK"
Skin Reinforcement Check
R16 = "Pass-Spacing is OK"
R17 = "Pass-Reinforcement is OK"
BEAM SIZE 400X1195
Owner: Owner:
ABTP York Region Computed
Computed by : SN By: Sachin Agarwal
Plant: Upper York Sewage Servicing
Plant: TWAS Date: 4th Oct-2016
Date: 18.09.17
Unit: LiftUnit:
shaft Advanced Treatment BuildingVerified by: Nagaraju
Verified NV
By: Nagaraju NV
Project Project/File
no. 181344 No.: 184780 Date: 18.09.17
Date: 5th-Oct-2016
Title: Beam design 400x1195
Title: RCC Beam Design Sheet Page: 1 of 9
Revision: 1.0
Beam definition
Beam width b := 400mm
Overall beam depth h := 1195mm
Clear span of beam l := 4.5m
Clear cover to stirrup c := 35mm
Span type SupportVector :=
1
Support 2 length & depth
Allowable ratio of
1 "Simply Supported" 16
2 "One End Continuous" 18
3 "Both ends continuous" 21
4 "Cantilever" 8
Specify the type of spanning of beam span := 1 Enter the row number of the support.
For example, enter span = 4 for Cantilever
ExposureVector :=
Exposure type
1
Exposure 2
bc 3
b_c 4
skin
1 "Interior" 50 40 810-3
2 "Exterior" 40 30 0.01
Specify the type of Exposure exp := 2 Enter the row number of the exposure.
For example, enter span = 1 for Interior
Reinforcement dia table ReinfdiaVector :=
1
Reinf. 2
Diameter
1 "10M" 11.3
2 "15M" 16
3 "20M" 19.5
4 "25M" 25.2
5 "30M" 29.9
6 "35M" 35.7
7 "45M" 43.7
8 "55M" 56.4
Owner:
Owner: ABTP
York Region Computed
Computed byBy:
: SNSachin Agarwal
Plant:
Plant:TWASUpper York Sewage Servicing Date:
Date:18.09.17
4th Oct-2016
Unit:
Unit:LiftAdvanced
shaft Treatment Building Verified
Verifiedby:By:
Nagaraju NV NV
Nagaraju
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x1195
Title: RCC Beam Design Sheet Page: 2 of 9
Revision: 1.0
Check for minimum clear distance between bars in tension (CSA A23.3-14, Annexure A- cl.6.6.5.2)
[ b 2 ( c + ds) nb dfb]
Actual clear distance between bars Sbarsb := Sbarsb = 115.9 mm
( nb 1)
Min nominal cover based on bar diameter c1b := 1.4 dfb c1b = 35.28 mm
Min nominal cover based on aggregate size c2 := 1.4 a_max c2 = 35 mm
Allowable minimum clear distance between bars Sminb := max( c1b , c2 , 30mm) Sminb = 35.28 mm
R4 := if ( Sminb < Sbarsb , "Spacing between the bars is OK" , "Reduce the no. of bars-NOT OK" )
R4 = "Spacing between the bars is OK"
Check for crack control parameter (CSA A23.3-14, cl.10.6.1)
dfb
Depth of tension steel for crack control dcb := min ( c , 50mm) + + ds dcb = 58.9 mm
2
b 2
Ab := 2 dcb Ab = 15706.667 mm
nb
1
3
Zactb := 0.6 fy ( dcb Ab)
Quantity limiting distribution of flexural reinforcement Equation 10.6-CSA A23.3-14
1
Zactb = 23385.38 m kN
kN
Zall := 30000
m
R5 := if ( Zactb < Zall , "Spacing between the bottom reinforcement is OK" , "Reduce the no. of bars-NOT OK" )
R5 = "Spacing between the bottom reinforcement is OK"
Owner: ABTP
Owner: York Region Computed by
Computed By:: SN
Sachin Agarwal
Plant: TWAS
Plant: Upper York Sewage Servicing Date: 4th
Date: 18.09.17
Oct-2016
Unit: Lift
Unit: shaft
Advanced Treatment Building Verified By:
Verified by: Nagaraju
NagarajuNVNV
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x1195
Title: RCC Beam Design Sheet Page: 5 of 9
Revision: 1.0
Kr_t := 1 s _t fy 1 _t s fy
Resistance factor MPa
( 2 c 1 fc)
Kr_t = 1.08 MPa
2
Actual nominal flexural strength Mr_t := Kr_t b dt Mr_t = 557.4 kNm
R8 := if ( Mr_t > Mft , "Reinforcement provided is OK for flexure" , "Increase top flexural reinforcment-NOT OK" )
R8 = "Reinforcement provided is OK for flexure"
Check for minimum clear distance between bars in tension
[ b 2 ( c + ds) nt dft]
Actual clear distance between bars Sbarst := Sbarst = 115.9 mm
( nt 1)
Min nominal cover based on bar diameter c1t := 1.4 dft c1t = 35.28 mm
Min nominal cover based on aggregate size c2 := 1.4 a_max c2 = 35 mm
Allowable minimum clear distance between bars Smint := max( c1b , c2 , 30mm) Smint = 35.28 mm
R9 := if ( Smint < Sbarst , "Spacing between the bars is OK" , "Reduce the no. of bars-NOT OK" )
R9 = "Spacing between the bars is OK"
Owner:
Owner: ABTP
York Region Computed
Computed byBy:
: SNSachin Agarwal
Plant:
Plant: TWASUpper York Sewage Servicing Date:
Date:18.09.17
4th Oct-2016
Unit:
Unit: LiftAdvanced
shaft Treatment Building Verified
Verifiedby: Nagaraju
By: NV NV
Nagaraju
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x1195
Title: RCC Beam Design Sheet Page: 6 of 9
Revision: 1.0
1
3
Zactt := 0.6 fy ( dct At)
Quantity limiting distribution of flexural reinforcement Equation 10.6-CSA A23.3-14
1
Zactt = 23385.38 m kN
kN
Zall := 25000
m
R10 := if ( Zactt < Zall , "Spacing between the top reinforcement is OK" , "Reduce the spacing of top reinforcment-NOT OK"
R10 = "Spacing between the top reinforcement is OK"
kd :=
( 2 db B + 1 1)
kd = 234 mm
B
Owner:
Owner: ABTPYork Region Computed
Computed byBy:
: SNSachin Agarwal
Plant: TWAS Date: 18.09.17
Plant: Upper York Sewage Servicing
Unit: Lift shaft
Date: 4th Oct-2016
Verified by: Nagaraju NV
Unit: Advanced
Project no. 181344 Treatment Building Verified
Date: By: Nagaraju NV
18.09.17
Project/File
Title: No.:
Beam design 184780
400x1195 Date: 5th-Oct-2016
Title: RCC Beam Design Sheet Page: 8 of 9
Revision: 1.0
3 2
Cracked Moment of Inertia b kd + 3 n As_prov_b ( db kd) 4
Icr := Icr = 0.011589 m
3
2Ig
Cracking Moment Mcr := fr Mcr = 312.865 kNm
h
Mfb
Actual Service Moment Ma := Ma = 67.357 kNm
1.4
3
Ie := min Icr + ( Ig Icr)
Mcr 4
Effective Moment of Inertia , Ig Ie = 0.056883 m
Ma
Ig
Actual Deflection f := ( 1 + 2) f = 0.165 mm
Ie
l
Allowable Deflection all := all = 18.75 mm
a
R15 := if ( f < all , "Deflection is within Limit-OK" , "Deflection is high-NOT OK" )
R15 = "Deflection is within Limit-OK"
2.8 Check for Skin Reinforcement
As per cl10.6.2 in CSA A23.3-14, skin reinforcement is required only if the beam depth is more than 750 mm
Percentage of steel required s := ExposureVectorexp , 4 s = 0.01
Concrete face to the centre of the reinforcement x := c + ds + dk x = 62.3 mm
b > x , "PASS" , "Failed Increase Reinforcement" = "PASS"
if
4
h 2 c 2 ds dfb dft
sk :=
Actual spacing between the skin reinforcement 2 2
sk = 153.9 mm
nk + 1
R16 := if ( sk < 200mm , "Pass-Spacing is OK" , "Increase no. of bars-NOT OK" )
R16 = "Pass-Spacing is OK"
R17 := if ( Ask < Askpro , "Pass-Reinforcement is OK" , "Increase the reinforcement-NOT OK" )
R17 = "Pass-Reinforcement is OK"
Owner:
Owner: ABTP
York Region Computed
ComputedbyBy: : SNSachin Agarwal
Plant:
Plant: TWASUpper York Sewage Servicing Date:
Date:18.09.17
4th Oct-2016
Unit:
Unit: LiftAdvanced
shaft Treatment Building Verified
Verifiedby: Nagaraju
By: NV NV
Nagaraju
Project no. 181344 Date: 18.09.17
Project/File No.: 184780 Date: 5th-Oct-2016
Title: Beam design 400x1195
Title: RCC Beam Design Sheet Page: 9 of 9
Revision: 1.0
2.9 Summary
Bottom Reinforcement Checks
R1 = "Compression Steel is not Required"
R2 = "Reinforcement provided is more than min-OK"
R3 = "Reinforcement provided is OK for flexure"
R4 = "Spacing between the bars is OK"
R5 = "Spacing between the bottom reinforcement is OK"
Top Reinforcement Checks
R6 = "Compression steel is not required"
R7 = "Reinforcement provided is more than min-OK"
R8 = "Reinforcement provided is OK for flexure"
R9 = "Spacing between the bars is OK"
R10 = "Spacing between the top reinforcement is OK"
Shear Check
R11 = "Shear rings spacing is OK"
R12 = "Shear Capacity is OK"
Miscellaneous Check
R13 = "Clear Cover is OK"
R14 = "Span/Depth ratio is OK"
Thickness Check
R15 = "Deflection is within Limit-OK"
Skin Reinforcement Check
R16 = "Pass-Spacing is OK"
R17 = "Pass-Reinforcement is OK"
END OF CALCULATIONS