Professional Documents
Culture Documents
7075 Aluminium Sheet, ASTM B209 7075 Aluminium Sheet traders in India,
Hindalco 7075 Aluminium Sheet Dealers in Mumbai, Jindal 7075 Aluminium
Sheet Dealers in India, Wholesaler of Aluminium Sheet Grade 7075, EN AW
7075 Aluminium Extruded Sheet exporter in India, 7075 Aluminium Stucco
Sheets distributor in India, ASME SB209 7075 Aluminium Sheet suppliers in
India, Hindalco 7075 Aluminium Sheet dealer in India, Hot Rolled 7075
Aluminium Sheet Dealers
7075 Aluminium Sheet Suppliers in Mumbai, DIN Al-Zn-Mg Cu 1.5 Aluminium Sheet
stockist in India, 7075 Aluminium Corrugated Sheet Suppliers in Mumbai, Best Price of
EN AW 7075 H14 Aluminium Sheet, 7075 Aluminium Sheet Suppliers in UAE, 7075
Aluminium Sheet Supplier Singapore, Dealer & Distributor of All 7075 Aluminium Alloy
Sheet Grades, Stockholder of 7075 Aluminium Sheet 1mm, 7075 Aluminium Sheet
2mm stockholder in India, 7075 Aluminium Sheet 3mm wholesaler in India, Aluminium
EN AW 7075 Sheet 5mm importers in India, 7075 Aluminium Sheet Cut To Size At Best
Price, Manufacturer of 7075 Aluminium Sheet in Mumbai, India, 7075 Aluminium Alloy
Sheet Suppliers, Exporter of 7075 Aluminium Sheet in India, Aluminium 7075 Flat Sheet
manufacturer in Mumbai, Maharashtra, Aluminum Wrought Alloy grade 7075 Sheets
manufacturers in Rajkot, Gujarat, Hot Forming 7075 Aluminium Sheet, Cold Forming
7075 Aluminium Material Sheet, Cold Rolled 7075 Aluminium Sheets, Automotive 7075
Aluminum Alloy Sheet, 48 7075 Aluminum Sheet Manufacturer in India, EN 485-2
7075 Aluminium Patterned Sheet stockist, 7075 Aluminium Sheet Price in India
WHAT IS 7075 ALUMINIUM SHEET
Aluminium 7075 Sheet is an aluminum alloy, with zinc as the primary alloying element. 7075 Aluminium
Sheet is strong, with a strength comparable to many steels, and has good fatigue strength and average
machinability. ASTM B209 7075 Aluminium Sheet has lower resistance to corrosion than many other Al
alloys, but has significantly better corrosion resistance than the 2000 alloys. Its relatively high cost limits
its use to applications where cheaper alloys are not suitable. Aluminium 7075 Sheets available in many
tempers, some of which are 7075-0, 7075-T6, 7075-T651.
7075 Aluminium Sheet Temper 0, H32, H34, H38 as per ASTM B209, ASTM-B-
209, EN573, and EN485 international standards. Aluminum Alloy 7075 O, T6,
T62, T6510, T6511, T73, T73510, or T73511, UNS A97075, AMS-QQ-A-200/11
7075-T6 Aluminum Sheet: AMS-QQ-A-250/12, AMS-4045
7075-O ALCLAD Aluminum Sheet: ASTM-B-209
7075-O BARE Aluminum Sheet: AMS-QQ-A-250/12, AMS-4045
Sanghvi Overseas Incorporation is the leading manufacturer and exporter of 7075 Aluminium Sheet.
Supplier of ASTM B209 7075 Aluminium Sheet from 0.5mm to 5mm Thick 1000mm x 1000mm to
2500mm x 1250mm Tempers manufactured in accordance with international standards ASTM B209,
ASTM-B-209, EN573, and EN485, check 7075 Aluminium Sheet price. The general widths of 7075 H16
Aluminum sheets are 1000mm, 1250mm and 1500mm, while common lengths are 2000mm, 2500 mm
and 3000mm respectively. Wholesale Trader of 7075 Commercial Aluminium Sheet offered by Sanghvi
Overseas, Mumbai, India. Stockist of 7075 Aluminium Sheet, H32 7075 Aluminium Stucco Sheet, H38
Commercial 7075 Aluminium Sheet, ASME SB209 7075 Aluminium Patterned Sheet, 7075 Aluminium
Embossed Sheet, 7075 Aluminium Extruded Sheet, Hindalco 7075 Aluminium Sheet and Jindal 7075
Aluminium Sheet in India.
Alloy ASTM B209 1050, 1060, 1100, 1235, 3003, 3004, 3105, 5052, 5754, 6061, 8011
Aluminium 7075 Sheet Temper O, H12, H14, H16, H18, H22, H24, H26, H32, H112
Aluminium 7075 Sheet
0.5mm-150mm
Thickness
Aluminium 7075 Sheet Width 500-2000mm
Aluminium 7075 Sheet Length to clients requirement
Aluminium 7075 Sheet Coating Polyester, Fluorocarbon, polyurethane and epoxy coating
7075 Aluminium Sheet Coating
PVDF, POLYESTER(PE)
finish
Surface Bright, polished, hair line, brush, sand blast, checkered, embossed, etching, etc.
Gloss Meet the customer requirement
Total coating thickness PVDF coating: More than 25 micron; Polyester coating: More than 18 micron
Coating hardness (pencil hardness) more than 2H
Coating adhesive No lower than1st grade
Impact resistance No cracking or peeling (50kg/cm, ASTMD-2794: 1993)
Flexibility (T-bend) 2T
MEK resistance More than 10
Available Aluminium 7075
1ft x 1ft, 1ft x 2ft, 1ft x 4ft, 2ft x 2ft, 2ft x 4ft, 4ft x 4ft, 4ft x 8ft, 4ft x 10ft or Cut to Size or Custom Shape.
Sheet Stock Sizes
Aluminium 7075 Sheet Delivery
30-60 days after receiving the prepayment
Time
Standard export package.
Aluminium 7075 Alclad Sheet One pallet is about 2-3 ton.Two steel belts in width and three in width.
Packaging Details One 20GP container can load about 18-20 tons Aluminium 7075 Sheet.
One 40GP container can load about 24 tons Aluminium 7075 Sheet
ASTM B209 Alloy 7075 Outer Export standard, wooden pallet
packing
Bottom side Aluminium 7075 Sheet is coated with protective polyester material, thickness more than 6 micron
Singapore, Indonesia, Ukraine, Korea, Thailand, Vietnam, Saudi Arabia, Brazil, Spain, Canada, USA, Egypt, Iran,
Export to
India, Kuwait, Dubai, Oman, Kuwait, Peru, Mexico, Iraq, Russia, Malaysia, etc.
Europe
EN 4101 2024 T4
France
Germany
UK
BS L156/157/158*/159* 2014A
USA
BS USA
European Standard GERMANY (DIN) ISO IS Canadian
(OLD) (AA)
19500,
EN AW-1050 A 1E 1050 Al99.5 Al99.5 1S
19501
Al-Cu2-Mg1.5-
2030 Al-Cu-Mg-Pb 2618
Ni
Al Mn 1 Mg
3004 Al-Mn.1-Mg.1 3005
0.50
64401 6201
Aluminum
Old New U.S.A Min. Max. Min. Max. Min. Max. Min. Max. Max Max. 99.0%
Min.
Zinc (5.1-
6.1) &
7075 1.20 2.0 2.1 2.9 0.5 0.7 0.3 0.2
Chromium
(0.2-0.28)
Modulus of 71.7 GPa 10400 ksi AA; Typical; Average of tension and compression. Compression modulus
Elasticity is about 2% greater than tensile modulus.
Fatigue Strength 159 MPa 23000 psi AA; 500,000,000 cycles completely reversed stress; RR Moore
machine/specimen
7075 BS 2 L95 Alloy 7075- AMS 4038 7075-T651 QQ-A-250/13 7075-0 EN 2127 AIR
A97075 T651 Plate Superseded by AMS Alclad sheet and plate 9048.690
A87075 BS 2 L88 Alloy 7075- 4045 QQ-A-250/13 7075-T6 7075-T7351
T6 Clad Sheet and AMS 4039 7075-T651 Alclad sheet and plate Plate
Strip Superseded by AMS QQ-A-250/18 7075-0 AIR
BS L160 Alloy 7075- 4049 Clad one side, sheet 9048.700
T73511 Bars and AMS 4044 7075 -0 and plate 7075-T7351
Sections Sheet and Plate QQ-A-250/18 7075-T6 Plate
BS L161 Alloy 7075 AMS 4045 7075-T6 Clad one side, sheet AIR
Forging Stock and Sheet and T651 Plate and plate 9048.710
Forgings AMS 4046 7075-T6 QQ-A-250/24 7075- 7075-T7351
BS L162 Alloy 7075 Alclad one side Sheet, T7651 Plate Plate
Forging Stock and T651 Plate QQ-A-250/25 7075 AIR 9049
Forgings AMS 4048 7075-T0 Sheet, clad with7072-
BS L170 Alloy 7075- Alclad Sheet and Plate T76
T6511 Bars and AMS 4049 7075 -T6 QQ-A-250/26 7075
Sections Alclad Sheet and T651 Sheet, clad with7011-
DTD 5110 7075 Clad Plate T76
Plate AMS 4078 7075-T351 QQ-A-367 Alloy 7075-
DTD 5124 7075 Bars Plate T6 Forgings
and Sections AMS 4122 7075-T6 MIL-A-22771
Cold finished rod, bar,
wire
AMS 4123 7075-T651
Cold finished bar, rod
AMS 4124 7075-T7351
Cold finished bar, rod,
wire
AMS 4126 7075-T6
Forgings
AMS 4131 7075-T74
Forgings
AMS 4139 7075
Forgings (Non-Current)
AMS 4141 7075-T73
Die Forgings
AMS 4147 7075-T7352
Forgings
AMS 4154 7075-T6
Extrusions
AMS 4166 7075-T73
Extrusion
AMS 4167 7075-
T73511 Extrusions
AMS 4168 7075-T6511
Extrusions
Unstraightened
AMS 4169 7075-T6511
Extrusions
Straightened
AMS 4174 7075-T73
Flash Welded Rings
AMS 4186 7075-TF
Cold finished bar, rod,
wire
AMS 4187 7075-0 Cold
finished bar, rod, wire
Key Words: Aluminium 7075-T6; Aluminium 7075-T651, UNS A97075; ISO AlZn5.5MgCu; Aluminium
7075-T6; Aluminium 7075-T651; AA7075-T6
F As Fabricated
O Annealed
H Strain Hardened
W Solution Heat Treated
T Solution Heat Treated
T1 Cooled from an elevated temperature shaping process and naturally aged to a substantially
stable condition.
T2 Cooled from an elevated temperature shaping process, cold worked, and naturally aged to a
substantially stable condition.
T3 Solution heat treated, cold worked, and naturally aged to a substantially stable condition.
T4 Solution heat treated, and naturally aged to a substantially stable condition.
T5 Cooled from an elevated temperature shaping process then artificially aged.
T6 Solution heat treated then artificially aged.
T7 Solution heat treated then overaged/stabilized.
T8 Solution heat treated, cold worked, then artificially aged.
T9 Solution heat treated, artificially aged, then cold worked.
T10 Cooled from an elevated temperature shaping process, cold worked, then artificially aged.
Additional digits may be used after the first T temper digit to indicate subsequent stress relieving by
processes such as stretching, compressing, or a combination.
Contact Us
Sanghvi Overseas Incorporation
(An ISO 9001 : 2008 Certified Organization)
SALES & ADMIN OFF:
Flat No 255/254, 25th Floor, E Wing,Siddhesh Joyti, Balaram Street, Grant Road (E) Mumbai-400007,
India
Tel: +91-22-67521121
Email: info@sanghvioverseasinc.com , sanghvioverseasinc@gmail.com
Contact Person: Mr Vimal Sanghvi
Mobile: +91 9004551150
Visit Our site : http://www.sanghvioverseasinc.com