You are on page 1of 4

Home Independent Learning Plan Practice Questions Help

Oxygenation: Respiratory : Chest Drainage Systems


Monitoring a Client with a Chest Drainage System Choose Procedure

Text Demonstrate

Purpose
1. Monitor respiratory status of a patient with a chest tube.
2. Ensure chest drainage system is functioning adequately to promote lung expansion.

Assessment
Assess respiratory status (i.e., watch symmetrical expansion of thoracic cage; auscultate breath sounds;
assess quality, depth, and rate of breaths, pulse oximetry).
Assess for clinical signs and symptoms of hypoxia: anxiety, decreased levels of consciousness, inability to
concentrate, fatigue, dizziness, cardiac dysrhythmias, pallor or cyanosis, dyspnea. Notify physician
immediately of any significant changes in patient's respiratory status.

Equipment
Occlusive sterile dressing (if needed).
Chest tube
Chest tube drainage system

Procedure
1. Confirm physician's order including amount of suction.
Rationale: Prevents potential errors.

2. Assist client to semi- or high Fowler's position.


Rationale: These positions assist with optimal lung expansion.

3. Assess insertion site of chest tube. Note and document amount and color of drainage on dressing around
insertion site. Feel insertion site for crepitus-air leaking into the subcutaneous tissue (Fig. 1). Document any
crepitus found. Reinforce insertion dressing as needed.
Rationale: Excessive drainage around the insertion site can indicate bleeding. The
insertion site dressing may need to be changed by the surgeon who inserted the
chest tube. Development of crepitus can indicate a small air leak into the
subcutaneous tissue. Crepitus may indicate a need for the surgeon to adjust the
chest tube placement.

Fig. 1: Palpate insertion site of chest tube.


4. Assess status of chest tubing. Be sure tubing remains at the level of the client and no dependent loops are
present. Assess that there are no visible clots in the tubing. You may gently "milk" (compress tubing with
fingers) the clots to encourage movement into the drainage system, but you never want to strip chest tubing.
Rationale: Dependent loops of tubing may collect fluid and prevent drainage of fluid
from the chest cavity. Stripping chest tubing can create dangerous intrathoracic
negative pressure, injuring the client.

5. Assess the drainage collection chamber. (Fig. 2) Be sure to keep chest drainage system upright. Assess for
amount, color, and character of drainage. Mark the collection chamber to accurately reflect the amount of
drainage accumulated during your shift (Fig. 3). Note any significant increase in the amount of drainage.
Rationale: Keeping the drainage system upright will maintain a water seal and
ensure proper sequential filling of the collection chambers. Marking the collection
chamber at the end of each shift will allow evaluation of output to detect excessive
bleeding or healing.

Fig. 2: Assess drainage collection chamber.

Fig. 3: Mark collection chamber.

6. Assess suction chamber. Make sure the water level in the suction chamber is at the prescribed amount of
suction and that it is connected to the wall suction that is turned on to continuous suction (Fig. 4). Usually
the suction is set at 10 to 20 mm Hg.
Rationale: The amount of suction is determined by the water level in the suction
chamber rather than the suction setting on the wall unit. Gentle bubbling is normal
in the suction chamber.
Fig. 4: Assess water level in suction chamber.

7. Assess the system for any air leaks. Check all external connections (i.e., the chest tube's connection to the
drainage system, the suction tubing's connection to the drainage system). Examine the water seal chamber
as the client breathes normally and as he or she coughs.
Rationale: A chest drainage system needs to be a continuously closed system to
maintain the negative pressure necessary for normal respiratory function. Any air
leak interrupts this closed system. Bubbling in the water seal chamber may indicate
an intermittent or continuous air leak. Bubbling when a client coughs indicates an
intermittent air leak. Ongoing bubbling in the water seal chamber indicates a
continuous air leak. New air leaks need to be reported to the physician.

8. Encourage the client to cough, deep breathe, and use an incentive spirometer frequently. Provide analgesics
as necessary.
Rationale: Coughing and deep breathing will increase intrapleural pressure,
facilitating fluid drainage from the pleural space and enhancing lung expansion.
Analgesics will assist with pain control as the client coughs, deep breathes, and uses
an incentive spirometer.

9. Clamping chest tubes is no longer recommended.


Rationale: Clamping can result in sudden accumulation of air in the pleural space,
which can cause a tension pneumothorax, resulting in tension on the heart and great
vessels that can be life threatening.

10. If the chest tube becomes expelled, do not leave the client. Cover the opening where the chest tube had been
inserted with the sterile 4' 4' gauze, and keep direct pressure on the site. Send a colleague to call the
physician immediately.
Rationale: Leaving the chest tube insertion site open will create an open
pneumothorax and can result in respiratory distress. A physician will need to replace
the chest tube as soon as possible.

11. Document chest tube drainage, chest tube patency, presence of an air leak, amount of suction, pain level,
dressing status, and respiratory status.
Rationale: Documenting maintains legal record and communicates with health team
members.

Sample Documentation
10/18/10 2300 CT to 20 mm Hg pressure, minimal drainage and no air leak. Anticipate CT
removal in the am. S. Roberts, RN

Collaboration and Delegation


Notify the physician immediately if the chest tube dislodges, a sudden air leak occurs, significant unexpected
drainage occurs, or if the client is experiencing dyspnea. Caution all personnel to maintain upright position
of the chest tube drainage system and to keep it stable, often hooked to the bed. Take care that system does
not get under the bed where it could be accidentally cracked if the bed position were lowered.

You might also like