Professional Documents
Culture Documents
SKF puts the power of knowledge functionality, simply purchase the module
engineering into your hands with advanced and enter the supplied license key.
vibration monitoring technologies that have
made the SKF Microlog series of analyzers
the premier choice for portable hand held Route-based or stand-alone
condition monitoring. analyzer options
Designed to handle a wide range of tasks
required for analysis of rotating machinery The SKF Microlog product line consists of
in countless industries, SKF Microlog two types of analyzers: route-based
products offer customers the flexibility to analyzers such as the GX and AX series, or
select individual modules for specific types stand-alone analyzers such as the Advisor
of analysis. Pro and Consultant. The route-based SKF
Microlog GX and AX transfer both route and
non-route data to SKF @ptitude Analyst
SKF Microlog analysis software for trending, display and analysis. If
modules data analysis results in actionable work, a
work order request can be initiated and then
Balancing transfered directly from SKF @ptitude
Bump Test Analyst to CMMS or EMA systems to assist
Data Recorder in work order generation. SKF @ptitude
FFT Analyzer Analyst also features integration of Analysis
Conformance Check and Recording module functionality to
Run up Coast down support the SKF Microlog modules. The
Frequency Response Function stand-alone SKF Microlog Advisor Pro and
Spindle Test Consultant are designed for customers who
SKF Idler Sound Monitor do not require route-based analyzers. These
products transfer data directly to the
The SKF Microlog series of analyzers are Analysis and Reporting module, which is a
available in pre-configured kits that include stand-alone PC based supporting
modules designed to meet specific industry application, and/or Microsoft Excel for
requirements, or modules may also be analysis and display.
purchased individually. Each SKF Microlog is
shipped with the full SKF Microlog suite of
modules installed. To add additional
Balancing module Module compatibility
2
Bump Test module Module compatibility
Legend
2 Standard with SKF Microlog bundle
+ Available as an add-on module
Specifications
Input signal types: Accelerometers, velocity transducers,
displacement probes and volts
Measurement types: Spectrum
Display:
X axis: Hz, CPM
Y axis: Linear, log and log dB
Input signal range: 25 V maximum
Bump test: Peak hold or exponential
High pass filters: Off / 0,36 Hz / 1,1 Hz / 2 Hz / 10 Hz / 70 Hz
3
Data Recorder module Module compatibility
Specifications
Input signal options:
Up to four channel input depending on instrument model
Frequency range:
Channel 1: 0 to 20 kHz maximum frequency range (minimum
Fmax of 2 Hz)
Channel 1 and Channel 2: 0 to 15 kHz maximum frequency
range for each channel (minimum Fmax of 2 Hz)
Channel 1 and Tachometer: 0 to 10 kHz maximum frequency
range for each channel (minimum Fmax of 2 Hz)
Sampling rate done at 2,56 times maximum frequency
(The above specifications are for the SKF Microlog Advisor Pro and GX-M /
GX-S instruments. The SKF Microlog models AX and Consultant record
four channels.)
4
FFT Analyzer module Module compatibility
Specifications
Input signal types: Accelerometers, velocity transducers,
displacement probes
Y axis scaling units:
Acceleration (g, m/s2), A-V (single integration), A-D (double
integration)
Velocity (IPS, mm/s), V-D (single integration)
Displacement (m, mil)
gE, time
Measurement types: Spectrum, time waveform, phase
Display:
X axis: Hz, CPM
Y axis: Linear, log and log dB
Input signal range: 25 V maximum
Signal scaling: RMS, peak, peak to peak, true peak, true peak to
View up to 25 600 lines of FFT resolution peak
The FFT Analyzer module allows you to quickly set up spectral / Bearing condition: gE
phase measurements for analysis. The user has the option to select Averaging:
up to four channels (model dependent), up to 25 600 lines of Exponential or RMS
resolution and 80 kHz Fmax (single Channel) on the Consultant. The Overlap: 50%
Advisor Pro offers up to 12 800 lines of resolution and 40 kHz Fmax. High pass filters: Off / 0,36 Hz / 1,1 Hz / 2 Hz / 10 Hz / 70 Hz
Data may be stored in the SKF Microlog for future review, and can
be transferred to the host computer in comma separated value
format (.csv) for import and analysis into the Analysis and Reporting
module or spreadsheet applications such as Microsoft Excel.
The friendly user interface displays spectrum and phase
information in a simple, easy to understand format. By providing a
phase vector reading (needed to diagnose some machine faults) an
operator can build an understanding of the relative motion of
individual parts of the machine. Placing sensors, and setting up and
taking measurements can all be performed without the need to stop Ordering information
the machine. A tachometer reference is not required as the phase
measurement may be taken by cross-referencing channels one and SKF Microlog AX-F kit with FFT Analyzer module
CMXA 80-F-K-SL
two, allowing for analysis of machinery with buried or covered
shafts, such as gear boxes and pumps. SKF Microlog Consultant kit with FFT Analyzer module
CMXA 48-K-SL
5
Conformance Check Module compatibility
module
The Conformance Check module transforms the
SKF Microlog into a tool for inspection and
maintenance. An automated assessment compares vibration levels AX-M AX-S AX-F Consultant GX-M GX-S Advisor Pro
with established limits and a pass or fail indication is displayed to
show whether the product complies with predefined quality + + 2 2 + + 2
indicators or required standards. Conformance Check has the ability
to assess up to 64 individual fault criteria simultaneously and
provide an on-screen indication if a warning or alarm level is Legend
reached. 2 Standard with SKF Microlog bundle
+ Available as an add-on module
6
Ordering information
SKF Microlog Consultant kit with Conformance Check module and full suite of SKF Test Standards
CMXA 48-K-SL
SKF Advisor Pro kit with Conformance Check module and full suite of SKF Test Standards
CMXA 45-1A-SL
CMXA CL2-EN Test template in accordance with ISO 10816-2, land based steam turbine / motors
CMXA CL3-EN Test template in accordance with ISO 10816-3, industrial machines
CMXA CL4-EN Test template in accordance with ISO 10816-4, industrial gas turbines
CMXA CL5-EN Test template in accordance with ISO 10816-5, hydraulic, power, gen/pump
CMXA CL6-EN Test template in accordance with ISO 10816-6, reciprocating machines
CMXA CL7-EN Test template in accordance with ISO 8528-9, reciprocating driven generators
CMXA CL9-EN Test template in accordance with BS 4999-142, rotating electric machines
CMXA CL12-EN Test template in accordance with SKF Certified Rebuilder Program
CMXA CL15-EN Test template in accordance with ISO 10816-7, roto-dynamic pumps
7
Run up Coast down Module compatibility
module
View machine vibration data during a AX-M AX-S AX-F Consultant GX-M GX-S Advisor Pro
complete power cycle
+ + 2 2 + + +
The Run up Coast down module analyzes data from machines where
noise or vibration levels are changing with speed, time or load
(applications that cause transient phenomena) to establish the Legend
critical/resonant speeds of a machine. The module simultaneously 2 Standard with SKF Microlog bundle
acquires a vibration and a tachometer signal and stores the data as + Available as an add-on module
a time waveform (.wav file) for further analysis. The result of the
analysis can be presented in a variety of formats: Bode, Nyquist,
waterfall, color spectrogram or tables. The data may be stored in the Specifications
SKF Microlog for future review, and can be transferred to the host Signal Input: Accelerometers, velocity transducers, displacement
computer in comma separated value format (.csv) for import and probes, user defined engineering units (EUs), V AC
analysis into the Analysis and Reporting module or spreadsheet Y axis scaling units: Metric or imperial. Un-integrated, integrated
applications such as Microsoft Excel. or double integrated units.
In the Analysis and Reporting module raw signals and post Examples: g, m/s2, mm/s, in/sec, m, mils
processed data are linked to SKF @ptitude Analyst, allowing users to Analysis types: Bode, Nyquist, waterfall, color spectrogram, table
provide additional information about the data. format
Display:
X axis: Hz, CPM or orders
Y axis: Linear, log
Input signal range: 25 V maximum
Signal scaling: RMS, peak, peak to peak
Waterfall high pass filters: Off / 0,36 Hz / 1,1 Hz / 2 Hz / 10 Hz /
70 Hz
Key features
User selectable number of pulses per revolution (including non
integer numbers) Ordering information
Simultaneous display of any three orders (including non integer
orders) and overall value or any four orders without an overall SKF Microlog AX kit with Run up Coast down module
CMXA 80-F-K-SL
(Bode and Nyquist)
The analysis and display takes place on the SKF Microlog, where SKF Microlog Consultant kit with Run up Coast down module
CMXA 48-K-SL
results can be produced immediately while the operator is on site
SKF Microlog Run up Coast down module upgrade
CMXA MOD-RUCD-SL
8
Frequency Response Module compatibility
Key benefits
Simplified menus help to quickly and easily set up for a structural
test
The FRF module speeds up a modal test by using algorithms to
automatically set the input range for the hammer, transducer and
time Ordering information
Automatic setting of FFT window (rectangular or force and
response) SKF Microlog AX kit with Frequency Response Function module
CMXA 80-F-K-SL
The FRF module has the ability to automatically detect and reject
double hits or overloaded data SKF Microlog Consultant kit with Frequency Response Function
module
Measure the transfer function between two transducers while a CMXA 48-K-SL
machine is running
Display of coherence as color, such as the FRF is red where SKF Microlog Frequency Response Function module upgrade
CMXA MOD-FRF-SL
coherence is below the user defined limit
SKF Modal Analysis Hammer kits are available for use with the
Frequency Response Function module. Reference model numbers
CMAC 5056, CMAC 5057 and CMAC 5058 in the SKF Microlog
accessories catalog.
9
Spindle Test module Module compatibility
10
SKF Idler Sound Monitor Module compatibility
module
The SKF Idler Sound Monitor module turns an SKF
Microlog Analyzer into a hand-held portable
monitoring solution. Designed for early detection of faults in AX-M AX-S AX-F Consultant GX-M GX-S Advisor Pro
conveyor belt support and return idler rollers in industries such as
mining and cement. Using patented SKF enveloping technology + + 2 2 + + +2
applied acoustically, the SKF Idler Sound Monitor module allows
users to distinguish between good and faulty idler rollers. It detects
faulty rollers earlier and more reliably than the traditional conveyor Legend
belt maintenance. 2 Standard with SKF Microlog bundle
+ Available as an add-on module
Detect faulty idlers
Combining a high frequency microphone, a simple visual display,
headphones and an audible alarm, the SKF Idler Sound Monitor kit Measurement overview
allows operators to detect faulty idler rollers with minimal training. SKF Idler Sound Monitor listens to each rollers sound and
Use of this module will help detect: simultaneously applies four acoustic measurements that are preset
to best detect idler faults for typical conveyor conditions. These
Damaged idler bearings measurements are set up to monitor the types of sound emitted by
Lack of lubrication in bearings conveyor idler rollers and filter out other unwanted sounds. The four
Damaged idler shells techniques used to analyze data and detect faults are:
Metal-to-metal rubbing
Rumbling from abrasion with conveyor belts gE True Peak
Bearings that are about to seize. Detect impact type
vibration
gE Root Sum Square (RSS)
overall
Detect overall magnitude of
impact vibration
Kurtosis
Detect whether vibration
signal is a hiss, crackle,
rumbling
Harmonic Activity Indicator
(HAI)
Bearing harmonic activity
In addition to the simple traffic light display, customers also have the
Key benefits option to display each measurement value.
Simple traffic light color display
Measures both audible and ultra sound
Helps avoid unplanned downtime
Helps avoid costly belt damage and hazardous repairs Ordering information
Offers safer, easier inspection compared to traditional conveyor
belt walk arounds SKF Idler Sound Monitor kit
Contents: SKF Microlog Advisor Pro with SKF Idler Sound Monitor
Shorter measurement time module, FFT Analyzer module and accessories
Data can be transferred into the host computer in comma CMXA 45-ISM-K-SL
separated value format (.csv) for import into spreadsheet SKF Microlog Idler Sound Monitor module upgrade
applications CMXA MOD-ISM-SL
Input signal taken from ICP powered microphone
SKF Microlog AX-F kit with SKF Idler Sound Monitor module
Parabola designed to enhance the frequencies of interest while CMXA 80-F-K-SL
reducing the effects of background noise
Accessory kit for SKF Microlog GX and Advisor Pro
CMAC 5410
11
Analysis and Reporting module Module compatibility
Key features
Digital Signal Processing window
enables post processing of time waveform
(.wav) data using Fast Fourier Transform
(FFT) routines into Spectrum or Waterfall
plots
File download management specify file
locations on your PC or network; data is
sorted by date/time and module type
when it is uploaded
Import Conformance Check module
results, including the report table with the
machine graphic, as well as the spectral
results files
Conformance Check results can be
combined to generate trend plots Analysis and Reporting module waterfall plot with peak-in-band cursor.
12
Analysis and Reporting module time domain
plot run down recording (left), transfer
function Frequency Response Function (FRF)
plot (below).
13
Analysis and Reporting module time domain
plot (left) and bode plot (below).
14
Hardware requirements Ordering information
Stand-alone configuration The Analysis and Reporting module is available in the following
Running Analysis and Reporting module configurations:
Storing data
Analysis and Reporting module stand-alone PC based application (for
Minimum Recommended use with the SKF Microlog Advisor Pro and Consultant)
Configuration requirements requirements CMSW 7311-EN
Operating system Windows 7 OR Windows 7 OR Analysis and Reporting module integrated into SKF @ptitude Analyst
Windows XP Windows XP (for use with the SKF Microlog GX and AX)
Professional with Professional with CMSW 7400
Service Pack 2+ Service Pack 2+
15
Product Support Plans Greater peace of mind
Firmware and/or software upgrades keep your products
SKF is committed to providing the highest degree of customer advancing with current industry standards(1, 2)
support in the industry. Product Support Plans (PSP) extend the Unlimited technical support from knowledgeable professionals
standard product warranty for an additional length of time to can save you time and frustration by quickly resolving problems
continue your unlimited access to Technical Support, global repair Data accuracy with unlimited calibrations that comply with ISO
coverage and more. standards
Loaner equipment supplied when your product is brought in for
service(1)
Protect your investment Hassle-free repairs. Weve got you covered with parts, labor and
Product Support Plans help to make sure that your equipment is shipping.
maintained to the highest standards. Condition monitoring products
are an investment, and a Product Support Plan is a great way to Premier product support plans also include a full SKF @ptitude
protect your investment for years. Exchange subscription. SKF @ptitude Exchange is SKFs knowledge
portal, complete with white papers, articles, interactive services,
tutorials and more available 24 hours a day to help build your
staffs asset maintenance and reliability expertise.
Note: Contact your SKF representative for ordering information on SKF Microlog modules for the SKF Microlog MX (CMXA 44) and the SKF Microlog GX
(CMXA 70) models. Different module numbers apply to those discontinued products.
Seals
Bearings Lubrication Drawing on five areas of competence and application-specific expertise amassed over more than 100
and units systems years, SKF brings innovative solutions to OEMs and production facilities in every major industry world-
wide. These five competence areas include bearings and units, seals, lubrication systems, mechatronics
(combining mechanics and electronics into intelligent systems), and a wide range of services, from 3-D
Mechatronics Services
computer modelling to advanced condition monitoring and reliability and asset management systems.
A global presence provides SKF customers uniform quality standards and worldwide product availability.
Please contact:
SKF USA Inc.
Condition Monitoring Center San Diego
5271 Viewridge Court San Diego, California 92123 USA
Tel: +1 858-496-3400 Fax: +1 858-496-3531
Web Site: www.skf.com/cm
SKF, @PTITUDE and MICROLOG are registered trademarks of the SKF Group.
Microsoft, Windows, Excel and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
ICP is a registered trademark of PCB Group, Inc.
All other trademarks are the property of their respective owners.
SKF Group 2012
The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written per-
mission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can
be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.
SKF reserves the right to alter any part of this publication without prior notice.
SKF Patents include: #US04768380 #US05679900 #US05845230 #US05854553 #US05992237 #US06006164
#US06199422 #US06202491 #US06275781 #US06489884 #US06513386 #US06633822 #US6,789,025
#US6,792,360 US 5,633,811 US 5,870,699 #WO_03_048714A1
skf.com