Professional Documents
Culture Documents
15
SRI VENKATESWARA COLLEGE OF ENGINEERING
LP: PH6151
Department of APPLIED PHYSICS
Rev. No: 00
B.E/B.Tech/M.E/M.Tech : Common to All Branches Regulation:2013
Date:
PG Specialisation : _________________________
Sub. Code / Sub. Name : PH6151 / ENGINEERING PHYSICS-I
Unit : I-CRYSTAL PHYSICS
CRYSTAL PHYSICS (9)
Lattice Unit cell Bravais lattice Lattice planes Miller indices d spacing in cubic lattice Calculation of number
of atoms per unit cell Atomic radius Coordination number Packing factor for SC, BCC, FCC and HCP structures
Diamond and graphite structures (qualitative treatment)- Crystal growth techniques solution, melt (Bridgman and
Czochralski) and vapour growth techniques (qualitative)
Objective: At the end of this unit, the students understand about the structure identification of engineering materials.
Session Topics to be covered Ref Teaching
No * Aids
1 Introduction 8-ch. 1; Pg.1.1- PPT
Classification of solids- crystalline solids (or) Amorphous solids, Differences 1.7
between crystalline and amorphous materials.
Concepts of Elementary Crystallography
Unit Cell- Space Lattice-How is a crystal formed?
2 Crystallography 8-ch. 1; Pg.1.8- PPT
Lattice parameters-Bravais lattices 1.14,1.39-1.46
Lattice Planes-Miller Indices
Procedure for finding Miller Indices-Important features of Miller Indices-
procedure for drawing the plane for given Miller Indices (hkl)
3 Inter planar d spacing in a Cubic Lattice -Problems 8-ch. 1; PPT
Pg.1.47-1.51
Session Teaching
Topics to be covered Ref
No * Aids
PROPERTIES OF MATTER 4-Ch.2 ; Pg.2.1-
Introduction - 2.4,2.7-2.12
1 Elasticity-stress and strain-Elastic moduli-The Youngs modulus (E)-The PPT
Bulk Modulus(K)-The rigidity modulus or shear modulus(G)- relation
between the three moduli of elasticity E, K, and G
The variation of Stress and Strain (stress -strain diagram) 4-Ch.2 ; Pg.2.4- PPT
2
Poissons ratio Factors affecting elasticity 2.6
Bending Moment-Free end of a Cantilever -Theory 4-Ch.2 ; PPT
3
Expression for bending moment-Bending of a Cantilever -experiment Pg.2.25-2.34
Uniform Bending-Theory- Girders 4-Ch.2 ; PPT
4
Uniform bending-Experiment-I-Shaped Girders Pg.2.35-2.43
THERMAL PHYSICS 4-Ch.3 ; Pg.3.1- PPT
Introduction Modes of Transfer-Conduction-convection-radiation 3.10
5
Newtons law of cooling-Derivation of Newtons law of cooling-
Experimental verification of Newtons law of cooling
The Mechanism of Conduction in solids 4-Ch.3;Pg.3.11- PPT
6
Thermal conductivity-Theory of Linear Heat Flow through a Rod 3.16
Determination of Thermal Conductivity 4-Ch.3 ; PPT
7
Theory of thermal conductivity of poor conductors- Lees Disc method Pg.3.21-3.25
Radiation Flow of Heat 4-Ch.3 ; PPT
8 Radial flow of Heat through the sides of a tube-Thermal conductivity of Pg.3.25-3.30
rubber
Thermal Conduction through Compound Media 4-Ch.3 ; PPT
9 Pg.3.17-3.21
Bodies in series-Bodies in parallel
Objective: At the end of this unit, the students will understand about the production and detection of ultrasonic
waves and its application in various fields.
Session Teaching
Topics to be covered Ref
No * Aids
ACOUSTICS 6-Ch.5 ;
Introduction Pg.5.1-5.8
Classification of sound-Musical sound-Noise
1 Characteristics of Musical Sounds PPT
Pitch or frequency-Loudness or Intensity-Measurement of Intensity level-
decibel-Physical significance of 1 decibel change-Weber-Fechner law-
Quality or timbre
Sound intensity in a room 5-Ch.1 ; PPT
Reverberation-Reverberation time-Absorption coefficient Pg.1.14-1.20
2
Sabiness Formula (Growth and Decay Method) -Measurement of Sound
Absorption Coefficient-
Factors affecting the Architectural Acoustics and their Remedies- 5-Ch.1 ; PPT
3
Applications of Acoustics Pg.1.22-1.26
ULTRASONICS 6-Ch.6 ; PPT
4 Pg.6.1-6.6
Introduction-Ultrasonic Production-Magnetostriction Method
Piezoelectric method 6-Ch.6 ; PPT
Piezo electric effect-Inverse Piezo electric effect-Piezoelectric materials- Pg.6.6-6.14
5
piezoelectric oscillator -Properties of Ultrasonic waves-Acoustic Grating
Formation
Applications of Ultrasonic waves 6-Ch.6 ; PPT
6 Non Destructive Testing ultrasonic inspection-Ultrasonic flaw Pg.6.14-6.19
detector pulse echo system
Scan Displays 8-Ch.6 ; PPT
7 Pg.6.16-6.18
A-Scan Display-B-Scan Display-C-Scan Display-Comparison
Applications of Ultrasaonic NDT 6-Ch.6 ; PPT
8 Pg.6.23-6.25
Advantages of Ultrasonics, NDT, Limitations of ultrasonic NDT
Medical Applications of Ultrasonic waves 8-Ch.6 ; PPT
9 Pg.6.19-6.21
Sonogram
Dispersion 8-Ch.8 ;
8 Attenuation (Losses in Fibers)-Fiber optic Medical Endoscopy-Some Pg.8.15- PPT
applications of fiber-Optic endoscopy. 8.18,8.23-8.25
Problems 8-Ch.8
9
Course Outcome 5: To enhance knowledge about photonics and optical fiber communication
system.
FT/GN/68/00/21.04.15
SRI VENKATESWARA COLLEGE OF ENGINEERING
Course Outcomes:
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10
CO1 A A C B B B B B B B
CO2 A A B B B B B C B B
CO3 A B C B B B C A C C
CO4 A B B B B B B B C B
CO5 A B B C B C B B A B
Course Outcomes:
Programme Outcome 4: Graduates will demonstrate the ability to function on engineering and science laboratory
teams, as well as on multidisciplinary design teams.
Programme Outcome 5: Graduates will demonstrate the ability to identify, formulate and solve Civil engineering
problems.
Programme Outcome 6: Graduates will demonstrate an understanding of their professional and ethical
Responsibilities.
Programme Outcome 7: Graduates will be able to communicate effectively in both verbal and written forms.
Programme Outcome 8: Graduates will have the confidence to apply engineering solutions in global and societal
contexts.
Programme Outcome 9: Graduates should be capable of self-education and clearly understand the value of lifelong
learning.
Programme Outcome 10: Graduates will be broadly educated and will have an understanding of the impact of
engineering on society and demonstrate awareness of contemporary issues.
Programme Outcome 11: Graduates will be familiar with modern engineering software tools and equipment to
Analyze Civil engineering problems.
Mapping CO PO :
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11
CO1 A A B B A B B B C B B
CO2 A A B B B B C B B C B
CO3 A B B B B B A C B B B
CO4 A B B B B B B B B B B
CO5 A B B B B B B B B A B
Course Outcomes:
Course Outcome 1: Working knowledge of fundamental physics and basic engineering
principles to include advanced knowledge in one or more engineering disciplines
Course Outcome 2: The ability to formulate, conduct, analyzes, and interprets
experiments in engineering physics.
Course Outcome 3: To understand and to compute problems in Quantum Physics
Course Outcome 4: Use modern engineering physics techniques and tools, including
software and laboratory instrumentation.
Course Outcome 5: To enhance knowledge about photonics and optical fiber
communication system.
Programme Outcomes: [CS]
Programme Outcome 1:An ability to apply knowledge of mathematics, science, and engineering
Programme Outcome 2: An ability to design and conduct experiments, as well as to analyze and interpret
data
Programme Outcome 3: An ability to design a system, component, or process to meet desired needs within
realistic constraints such as economic, environmental, social, political, ethical, health and safety,
manufacturability, and sustainability.
Programme Outcome 4: An ability to function on multidisciplinary teams
Programme Outcome 5: An ability to identify, formulate, and solve engineering problems
Programme Outcome 6: An understanding of professional and ethical responsibility
Programme Outcome 7: An ability to communicate effectively
Programme Outcome 8: The broad education necessary to understand the impact of engineering solutions
in a global, economic, environmental, and societal context
Programme Outcome 9: A recognition of the need for, and an ability to engage in life-long learning
Programme Outcome 10: A knowledge of contemporary issues
Programme Outcome 11: An ability to use the techniques, skills, and modern engineering tools necessary
for engineering practice.
Mapping CO PO :
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11
CO1 A A B B A B B B C B B
CO2 A A B B B B C B B C B
CO3 A B B B B B A C B B B
CO4 A B B B B B B B B B B
CO5 A B B B B B B B B A B
Course Outcomes:
FT/GN/68/00/21.04.15
SRI VENKATESWARA COLLEGE OF ENGINEERING
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10
CO1 A A B B B B B B B B
CO2 A A B C C B B B B B
CO3 A B B B B B B B A B
CO4 A B B B A B B B B B
CO5 A B B B B A B B B B
Course Outcomes:
FT/GN/68/00/21.04.15
SRI VENKATESWARA COLLEGE OF ENGINEERING
Mapping CO PO :
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 A A B C B B C B B B B B
CO2 A B B B B B B C B B B B
CO3 A B B B B B B B B A B C
CO4 A B B B A B B B B C B B
CO5 A B B B B B A B B B B B
A Excellent; B Good; C Average
Course Outcomes:
Course Outcome 1: Working knowledge of fundamental physics and basic
engineering principles to include advanced knowledge in one or more
engineering disciplines
Course Outcome 2: The ability to formulate, conduct, analyzes, and interprets
experiments in Engineering physics.
Course Outcome 3: To understand and to compute problems in Quantum Physics
Course Outcome 4: Use modern engineering physics techniques and tools.
Course Outcome 5: To enhance knowledge about photonics and optical fiber
communication system.
Programme Outcomes: [IT]
Programme Outcome 1: Apply Engineering knowledge to solve problems in different areas of Information
Technology.
Programme Outcome 2: Identify, hypothesize and construct software Requirement Specification using various
concepts and techniques in the field of IT.
Programme Outcome 3: Design and develop solutions for complex systems to meet the needs of society and IT
industry.
Programme Outcome 4: Ability to conduct research in diversified field of Mobile Communication, Web
technology Data Mining, Cryptography, Network Security etc to obtain valid conclusions for challenging problems.
Programme Outcome 5: Develop programming skills to use sophisticated and advanced software tools of IT.
Programme Outcome 6: Develop ability to perform best engineering and technical practices that benefit the
corporate society and industry.
Programme Outcome 7: Develop projects using software tools for satisfying the needs of end users.
Programme Outcome 8: Learn and follow the ethical principles involved in IT research and industrial practices.
Programme Outcome 9: Ability to work as an individual based on interest and also in multidisciplinary team of
Information Technology.
Programme Outcome 10: Develop effective communication and technical writing in IT research and industrial
practices.
Programme Outcome 11: Develop management skills to work in IT industry and also to become an entrepreneur in
the field of Information Technology.
Programme Outcome 12: Engage in lifelong learning process by updating the knowledge of individual with the
upcoming software tools and techniques.
Mapping CO PO :
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 A C B C C A C B B B B B
CO2 A C C C B B C B B B C C
CO3 A C C C B B C B B A B B
CO4 A B B B B B A B B B B B
CO5 A B B B B B B B A B B B
A Excellent; B Good; C Average
Course Outcomes:
Course Outcome 1: Working knowledge of fundamental physics and basic engineering
principles to include advanced knowledge in one or more engineering disciplines
Course Outcome 2: The ability to formulate, conduct, analyzes, and interprets
experiments in engineering physics.
Course Outcome 3: To understand and to compute problems in Quantum Physics
Course Outcome 4: Use modern engineering physics techniques and tools.
Course Outcome 5: To enhance knowledge about photonics and optical fiber
communication system.
Programme Outcomes: [ME]
Programme Outcome 1: Applying the engineering knowledge to solve problems in different areas of
Mechanical Engineering.
Programme Outcome 2: Identification, hypothesizing and conducting experiments using various theories
of Mechanical Engineering.
Programme Outcome 3: Designing and developing the solutions for complex processes in Mechanical
Engineering to meet the need of the society.
Programme Outcome 4: Developing the ability to conduct research in diversified field of Mechanical to
obtain valid conclusions for challenging problems.
Programme Outcome 5: Developing the skills to use modern and advanced tools of Mechanical
Engineering.
Programme Outcome 6: Developing the ability to perform good Mechanical practices that benefit the
society.
Programme Outcome 7: Developing the projects using Mechanical tools for environmental conservation
and sustainable development.
Programme Outcome 8: Learning and following the Management principles involved in Mechanical
research and industrial practices.
Programme Outcome 9: Developing the ability to work as an individual based on interest and also in
multi-disciplinary team of Mechanical engineering.
Programme Outcome 10: Developing the effective communication and scientific writing in Mechanical
research and industrial practices.
Programme Outcome 11: Developing the management skills to work in Mechanical industry and also to
become an entrepreneur in Mechanical Field.
Programme Outcome 12: Engaging in life-long learning towards the area of specialization in Mechanical
Engineering.
Mapping CO PO :
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 A A B B C B B C B B B B
CO2 A A C B B B B C B B B B
CO3 A C C B B B C C B A B B
CO4 A B B B A B B B B B B B
CO5 A B B B B B B B B B B B
A Excellent; B Good; C Average
Course Outcomes:
FT/GN/68/00/21.04.15
SRI VENKATESWARA COLLEGE OF ENGINEERING
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 A A B B C B B C B B B B
CO2 A A C B B B B C B B B B
CO3 A C C B B B C C B A B B
CO4 A B B B A B B B B B B B
CO5 A B B B B B B B B B B B
Course Outcomes:
Course Outcome 1: Working knowledge of fundamental physics and basic engineering
principles to include advanced knowledge in one or more engineering disciplines
Course Outcome 2: The ability to formulate, conduct, analyzes, and interprets
experiments in engineering physics.
Course Outcome 3: To understand and to compute problems in Quantum Physics
Course Outcome 4: Use modern engineering physics techniques and tools.
Course Outcome 5: To enhance knowledge about photonics and optical fiber
communication system.
Programme Outcomes:[BT]
Programme Outcome 1: Applying the engineering knowledge to solve problems in different areas of Biotechnology
Programme Outcome 2: Identification, hypothesizing and conducting experiments using various theories of life
sciences and engineering.
Programme Outcome 3: Designing and developing the solutions for complex processes in Biotechnology to meet the
need of the society.
Programme Outcome 4: Developing the ability to conduct research in diversified field of Biotechnology to obtain valid
conclusions for challenging problems.
Programme Outcome 5: Developing the skills to use modern and advanced tools of Biotechnology.
Programme Outcome 6: Developing the ability to perform good Biotechnological practices that benefit the society.
Programme Outcome 7: Developing the projects using Biotechnological tools for environmental conservation and
sustainable development.
Programme Outcome 8: Learning and following the ethical principles involved in Biotechnology research and
industrial practices.
Programme Outcome 9: Developing the ability to work as an individual based on interest and also in disciplinary
team of Biotechnology.
Programme Outcome 10: Developing the effective communication and scientific writing in Biotechnology research
and industrial practices.
Programme Outcome 11: Developing the management skills to work in Biotechnology industry and also to become
an entrepreneur in Biotechnology
Programme Outcome 12: Engaging in life-long learning towards the area of specialization in Biotechnology.
Mapping CO PO :
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 A A C B B B B B B B B B
CO2 A A B B B B B C B B B B
CO3 A B C B B B C A C C B B
CO4 A B B B B B B B C B B B
CO5 A B B C B C B B A B C B
A Excellent; B Good; C Average
TEXT BOOKS:
1. Arumugam M. Engineering Physics. Anuradha publishers, 2010
2. Gaur R.K. and Gupta S.L. Engineering Physics. Dhanpat Rai publishers, 2009
FT/GN/68/00/21.04.15
SRI VENKATESWARA COLLEGE OF ENGINEERING
REFERENCES:
3. Searls and Zemansky. University Physics, 2009
4. Mani P. Engineering Physics I. Dhanam Publications, 2011
5. Marikani A. Engineering Physics. PHI Learning Pvt., India, 2009
6. Palanisamy P.K. Engineering Physics. SCITECH Publications, 2011
7. Rajagopal K. Engineering Physics. PHI, New Delhi, 2011
8. Senthilkumar G. Engineering Physics I. VRB Publishers, 2011
Prepared by Approved by
Signature
Remarks *:
* If the same lesson plan is followed in the subsequent semester/year it should be mentioned and signed by the
Faculty and the HOD