Professional Documents
Culture Documents
GILBERT DETERA
LABORATORY INSTRUCTOR
OBJECTIVES
To able to understand PCM Decoding
To be able to recover the signal that is produce by PCM Decoding
To be able to understand the PCM Decoding
7-bit linear
Voutput waveform
-2.5V
0V
2.5V
ANALYSIS & CONCLUSION
In this activity, we decoded the encoded signal using the PCM decoder. We used dc
voltage as an input. With this input, I observed that when the input is in minimum, the PCM
width of the rectangular waveform is narrow. When its in 0V input, the PCM width widens
but theres still a narrow rectangular wave inside it. When its in maximum input, the PCM
width widens that the narrow width inside it disappeared. In conclusion with regards to 4-
bit linear and 7-bit linear decoder, it reconstructs the almost the same message as the
original message due to high quantisizing level in 7-bit linear decoder while in 4bit linear
decoder, theres a phase shift in its output waveform due to low quantisizing level. PCM
decoding involves the processes of identifying each frame in the data stream of the encoded
PCM, extracting the binary numbers of each frame, generating a voltage proportional to the
binary number, and reconstructing the message by passing the PAM signal generated from the
previous process through the low pass filter.