Professional Documents
Culture Documents
1. Number Properties
2. Inequalities
3. Averages
4. Ratios
5. Sequences & Progressions
6. Set Theory
7. Co-ordinate Geometry
8. Geometry
Before we start off, what is a prime number and a composite number? (For people who are not sure)
Quote:
A Prime Number is a positive integer that is divisible by ONLY 2 numbers (1 and itself). Whereas, A
composite number is a positive integer which has divisor(s) other than the 2 numbers (1 and itself).
Ok, coming back to the point. I will name the number as n for simplicity. Following are the steps to test
whether a number is a prime or composite,
Example:
1. 100 is the closest perfect square to 113 (Remember that you take a closest perfect square that is
smaller than n itself!)
2. Square root of 100 ==> 10
3. Prime numbers upto the square root (10) ==> 2,3,5,7.
4. Check whether 2,3,5,7 divides 113. None of the numbers divide 113. So, 113 is a prime.
There is one interesting cool fact to know. I remember applying this fact in actual GMAT. It's good to
learn if you don't know.
Quote:
Product of any 2 numbers = Product of LCM and HCF of those 2 numbers
Warning: Some people may not find this approach comfortable. Some may find it comfortable. Please
follow and practice only if you are comfortable with this approach. Otherwise, please ignore it.
Sometimes, we get one type of question in GMAT where we need to calculate units digit of integers
raised to some power. I found a shortcut where you could save time by remembering some patterns.
Pattern 1:
Unit's place that has digits - 2/3/7/8
Then, unit's digit repeats every 4th value. Divide the power (or index) by 4.
After dividing,
If remainder is 1, unit digit of number raised to the power 1.
If remainder is 2, unit digit of number raised to the power 2.
If remainder is 3, unit digit of number raised to the power 3.
If remainder is 0, unit digit of number raised to the power 4.
Pattern 2:
Unit's place that has digits - 0/1/5/6
Then, all powers of the number have same digit as unit's place.
Pattern 3:
Unit's place that has digit - 4
Then,
If power is odd --> unit's digit will be '4'
If power is even --> unit's digit will be '6'
Similarly,
Unit's place that has digit - 9
Then,
If power is odd --> unit's digit will be '9
If power is even --> unit's digit will be '1'
Example:
Let's take a long number - 122 ^ 94. Find unit's digit.
I found this approach very easy and comfortable. So, see how comfortable it is for you and apply.
We are often faced to test the divisibility of some number in the exam. Following points may help you in
simplifying the process,
Divisibility Tests:
By 4: Last 2 digits (Unit's place and ten's place) of n are 0's (OR) Last 2 digits of n must be divisible by
4.
By 6: n must be divisible by both 2 and 3 (Follow the method used for 2 and 3).
By 8: Last 3 digits (units, tens and hundredth place) of n are 0's (OR) Last 3 digits of n is divisible by 8.
By 11: (Sum of the digits of n in odd places) - (Sum of the digits of n in even places) ==> Either 0 (OR)
divisible by 11.
By 12: n must be divisible by both 3 and 4 (Follow the method used for 3 and 4).
By 25: Last 2 digits (units and tens place) of n are 0's (OR) Last 2 digits of n must be divisible by 25.
By 75: n must be divisible by both 3 and 25 (Follow the method used for 3 and 25).
i. Let's take a non-perfect square number such as 32. Keep picking a number (start from 1) that divides
32 until you reach a number that is smaller than the quotient.
Small Large
1 32
2 16
48
Stop! If you take 8, you get 4 as quotient which is smaller than the number (8).
Therefore, there are 3*2 = 6 factor pairs or number of factors of 32.
ii. Let's take a perfect square number such as 36. Keep picking a number (start from 1) that divides 36
until you reach a number that is smaller than the quotient.
Small Large
1 36
2 18
3 12
49
66
Totally, there are 5*2 = 10 factor pairs or number of factors of 36. But, (6,6) gets repeated twice. So,
deduct 1 from factor pairs i.e. 10-1 = 9 factor pairs or number of factors of 36.
If N is expresses in terms of its prime factors as a^p * b^q * c^r, where p,q,r are positive integers, then
N will have (p+1) * (q+1) * (r+1) positive factors.
Example:
i. 32 = 2^5.
No. of factors = (5+1) = 6.
If N is a NON-perfect square, then the number of factors of N will ALWAYS be an EVEN number.
If N is expressed in terms of its prime factors as a^p * b^q * c^r, where p,q,r are positive integers, then
the sum of all factors of N is
Any number whose prime factorization contains even powers of primes, then the number must be a
perfect square.
Any number whose prime factorization contains powers of primes with multiples of 3, then the number
must be a perfect cube.
REMAINDERS:
(I)
When 2 numbers are divided by same divisor and the remainders obtained are the same,
THEN
DIFFERENCE b/w 2 numbers is also divisible by that divisor.
(II)
When 2 positive numbers 'a' and 'b' are divided by the same divisor 'd' and remainders obtained are 'r1'
and 'r2' respectively,
THEN
the remainders obtained when a+b is divided by d will be r1+r2
Quote:
NOTE: If r1+r2 >= d, compute (r1+r2) - d as the remainder.
(III)
When 2 positive numbers 'a' and 'b' are divided by the same divisor 'd' and the remainders obtained are
'r1' and 'r2' respectively,
THEN
the remainders obtained when a*b is divided by d will be r1*r2
Quote:
NOTE: If r1*r2 >= d, compute (r1*r2) / d as the remainder.
TAKEAWAY:
1. Pattern Method:
Example:
Solution:
Remainder when 2^1 is divided by 7 is 2
Remainder when 2^2 is divided by 7 is 4
Remainder when 2^3 is divided by 7 is 1
Remainder when 2^4 is divided by 7 is 2 --> Repeats again.
Now, Divide the power (or index) by 3 (no of steps after which remainder repeats) and compute a new
remainder.
56 % 3 --> 2 (remainder)
Now, raise the base (2) to the power 2 (new remainder). 2^2 % 7 --> 4.
Example:
Solution:
2^51 can be changed to (2^3)^17.
7 can be changed to (8-1) OR (2^3 - 1)
Remainder is 1.
Simple Facts:
a^n - b^n:
a^n + b^n:
(I)
If you add/subtract multiples of number 'N', the result is also a multiple of 'N'.
Examples:
35+21 = 56 [Multiple of 7]
20-15 = 5 [Multiple of 5]
TAKEAWAY:
In general, if N is a divisor of both x and y, then N is a divisor of both x+y and x-y.
(II)
If you add/subtract a multiple of N to/from a non-multiple of N, the result is a non-multipleof N.
Example:
9-5 = 4 [(Multiple of 3) - (Non-Multiple of 3) = (Non-multiple of 3)]
(III)
If you add/subtract 2 non-multiples of N, the result could either be a multiple or a non-multiple of N.
Examples:
19+13 = 32 [(Non-Multiple of 3) - (Non-Multiple of 3) = (Non-multiple of 3)]
19+14 = 33 [(Non-Multiple of 3) - (Non-Multiple of 3) = (Multiple of 3)]
EXCEPTION:
When N = 2, two odds always sum to an even number (Multiple of 2).
GCF Facts:
1. GCF of integers 'm' and 'n' CANNOT be larger than the difference between 'm' and 'n'.
Assume that GCF of m and n is 12. m and n are both multiples of 12. Consecutive multiples of 12 are 12
units apart from each other on the number line. Therefore, m and n CANNOT be less than 12 units
apart.
4 and 8 are multiples of 4. Thus 4 is a common factor of both the numbers. 4 and 8 are exactly 4 units
apart from each other on the number line. Thus, 4 is the greatest common factor (GCF) of 4 and 8. That
is why GCF of any 2 consecutive numbers is ALWAYS 1 as both are multiples of 1.
Consecutive Integers:
(x-1) and (x+1) are even. (x-1) is atleast divisible by 2 (Since it always has a 2). As (x-1) and (x+1) are
consecutive multiples of 2, (x+1) will have an additional 2 units apart from another 2 (i.e. 4). So, (x+1) is
divisible by 4.
Thus, (x-1) * x * (x+1) is divisible by 8
In other words, any integer is divisible by all of its factors and it is also divisible by all of the factors of its
factors.
Example:
Consider 36.
In general,
Odd integer divided by any other integer CANNOT produce an even integer.
Odd integer divided by an even integer CANNOT produce and integer.
Exponent Rules:
7. x^-a = 1 / x^a
Properties of Roots:
Counting Integers:
[(Last term - First term) / increment] + 1, where increment is the difference between each consecutive
term in the set.
Example:
Consider numbers 5,6,7,8,9,10 (6 consecutive numbers). Their PRODUCT is divisible by 6!
For any set of consecutive integers with an ODD number of items, the sum of all integers is
ALWAYS a multiple of the number of items.
Example:
Consider 1,2,3,4,5. Number of items is 5.
For any set of consecutive integers with an EVEN number of items, the sum of all integers is
NEVER a multiple of the number of items.
Example:
Consider 1,2,3,4,5,6. Number of items is 6.
--[You can try out any set of numbers to see whether the rule holds]--
Another GCF:
Example:
GCF (20,15) = 5.
If the fraction is completely simplified and the denominator only have 2's and 5's (or) only 2's or only 5's,
then it is a terminating decimal.
If the fraction is completely simplified and the denominator of the fraction has prime factors other than
2's and/or 5's , then it is a repeating/non-terminating decimal.
Ruthless ROOTS:
If n is a POSITIVE integer, then the nth root of any number (> 1) will ALWAYS be > 1.
Example: (Official Problem)
root (4) = 2
3root (4) > 1
4root (4) > 1
Although this is not very important, it is fun to simply know this point.
Example:
p = 3, n = 2
(2^3 - 2) is divisible by 3
OR
6 is divisible by 3
If x > y,
then x - y > 0 AND x = y + k (Where k > 0)
If x < y,
then x - y < 0 AND [x = y - k (Where k > 0) OR x = y + k (Where k < 0)]
II.
If x > y and k < 0,
then
k*x < k*y AND x/k < y/k
[-- Inequality reverses when k < 0 --]
(IMPORTANT)
THEN
Examples:
1. x = 3, y = 2, x > y
So, 1/3 < 1/2
Golden Rule:
When a NEGATIVE value is multiplied both sides in an INEQUALITY, then the INEQUALITY SIGN
reverses/flips.
Example:
-1/x > -3/14
1/x < 3/14 [-- Not only does the number sign changes, but also the inequality sign --]
Plug in the solutions back to the absolute equations to see whether it satisfies, whenever you
get multiple solutions while solving absolute equations (A very useful takeaway especially for solving DS
questions)
Example:
Solve, |x| = 3x - 2.
i. x = 3x - 2
2x = 2
x = 1.
ii. -x = 3x - 2
4x = 2
x = 1/2.
You get 2 solutions 1 and 1/2. DO NOT CONCLUDE that there are 2 solutions and move on. Plug in both
solutions back to the original equation (|x| = 3x - 2) and see whether the equation holds.
Sub. x = 1 in |x| = 3x - 2,
Equation SATISFIES!
Example:
That is the end of "INEQUALITIES". I will start posting on the chapter "AVERAGES".
Forthcoming points on "AVERAGES" are all very important takeaways. I'm sure that you will definitely
benefit from these points.
Weighted Averages:
In weighted averages involving 2 groups, if you have any 3 of the following, you can ALWAYS FIND the
fourth:
- Average of Group #1
- Average of Group #2
- Overall Average
- Ratio of Group #1 to Group #2
NOTE: This takeaway is especially useful for Data Sufficiency questions for which you sometimes do not
need to solve for the answer. When you see any 3 points in the question and statement and when you
are asked to calculate the fourth point, you DON'T need to solve actually. You can straight away conclude
that the statements are sufficient.
Avg Group 'A' ........... X ............ Overall Avg ............ Y .................... Avg Group 'B'
where, X is the distance b/w Group 'A' and Overall Avg and Y is the distance b/w Group 'B' and Overall
Avg.
A/B = Y/X
Example:
A class writes a math test and the overall average is 75%. If the girls average 85% and the boys average
70%, what fraction of the class is boys?
Boys (70%) ............ 5 ............... Overall Avg (75%) ............. 10 ............... Girls (85%)
B/G = 10 / 5 = 2/1
B:G = 2:1
Standard Deviations:
In order to calculate Standard Deviations, you need the following data points,
- Population of the Data set [-- Total Number of elements in the set --]
- Mean of the Data set
- Data points/elements themselves
EXCEPTION:
If the set has CONSECUTIVE INTEGERS, you DO NOT need to know the Data points/elements.
But knowing NUMBER OF TERMS (or POPULATION) is must.
If a constant percentage is added/subtracted from each term of the set, then the new SD is also
added/subtracted by that constant percentage.
If a constant is added/subtracted from each term of the set, then the new SD remains constant.
----
Assume S1 and S2 are the speeds of 2 trips. Distance d is the same for both the trips.
Assume T as the total time taken for both the trips.
Total Time Taken = (Distance of Trip 1/Speed of Trip 1) + (Distance of Trip 2/Speed of Trip 2)
T = d/S1 + d/S2
T = (d*S1 + d*S2) / (S1*S2)
T = d*(S1+S2) / (S1*S2)
Now calculate Average speed using Total Distance and Total Speed,
Avg Speed = Total Distance / Total Time Taken
NOTE: You don't need to solve this to get average speed. You can apply this formula straight away. Just
wanted to show you how the formula is arrived.
Assuming Distance is the same for both the trips. S1 and S2 are the speeds of Trips 1 and 2.
Step i:
Form S1:S2 and reduce the ratio as much as possible to S3:S4.
Then, add the parts of ratio -- S3+S4
Step ii:
|S1-S2| / (S3+S4) = N
Step iii:
S1 + (S3*N) = Avg Speed for the entire trip.
Example:
Calculate Avg Speed of 20 mph and 200 mph
Step i:
20:200 = 1:10 = 1+10 = 11 parts.
Step ii:
|20-200| / 11 = 16.36
Step iii:
20 + (1*16.36) = 36.36 mph -- [Average Speed for the entire trip].
Folks, That's the end of "Averages" chapter. I will start posting in "RATIOS". There are a few important
points to be noted which may be useful to you in the exam.
RATIOS:
1. a:b = a/b
Value of ratio remains unchanged when multiplied/divided,
a/b = a*m / b*m = (a/m) / (b/m)
2. If a/b = c/d = e/f, then each of these ratios is equal to a+c+e / b+d+f
Arithmetic Progressions:
--[This is applicable to the concept - Evenly Spaced Sets. Please refer this post]--
If a1, a2, ... an and b1, b2, ... bn are two AP's A and B, then
Geometric Progressions:
If a1, a2, ... an and b1, b2, ... bn are two GP's A and B, then
That's the end of "Series & Progressions". I will start posting flashcards on the next chapter "SET
THEORY".
SET THEORY:
For 3 set questions, there are 2 formulae that you can use.
Picture a Venn diagram; the first formula is just the sum of all of the various parts:
1. True # of objects = (# only A) + (# only B) + (# only C) + (# only AB) + (# only AC) + (#
only BC) + (# only ABC)
[Note that, technically, we should add a "+ (# with none of ABC)" to the end of each equation, but a 3
set question on the GMAT that had a "none" component is not often seen.]
To understand why we have to subtract the doubles once and the triples twice, again picture a Venn
diagram.
If an object is in the AB portion of the diagram, it's already been counted in the A circle and the B circle.
In other words, it's been counted twice. To get a true count, therefore, we must subtract it once.
If an object is in the ABC portion of the diagram, it's already been counted in the A circle, the B circle
AND the C circle. In other words, it's been counted three times. To get a true count, therefore, we must
subtract it twice.
Examples:
In a consumer survey, 85% of those surveyed liked at least one of three products: 1, 2, and 3. 50% of
those asked liked product 1, 30% liked product 2, and 20% liked product 3. If 5% of the people in the
survey liked all three of the products, what percentage of the survey participants liked more than one of
the three products?
Let's say there's 100 people, just to use numbers instead of percents. Since 85% like at least one of 3
products, we'll use 85 as our base number.
Since we have "at least one" information, we need to use the second formula:
Examples: (Contd..)
There are 70 students in Math or English or German. Exactly 40 are in Math, 30 in German, 35 in English
and 15 in all three courses. How many students are enrolled in exactly two of the courses? Math, English
and German.
We use the exact same formula:
True # of objects = (sum of total characteristics) - (sum of doubles) - 2(triples)
That's the end of "Set Theory". Really simple isn't it.. Knowing this stuff alone is more than sufficient for
GMAT (trust me!)
Co-ordinates of point 'P' dividing the join of the two points (x1,y1) and (x2,y2) INTERNALLY in the ratio
m:n is,
NOTE:
If ratio m:n has both m and n as POSITIVE, then its INTERNAL
If ratio m:n has one of m and n as NEGATIVE, then its EXTERNAL
Mid-point of a line:
(x1+x2 / 2, y1+y2 / 2)
Area of a triangle:
then
ii. A RHOMBUS:
* Show that diagonals AC and BD bisect each other.
* Show that a pair of adjacent sides are equal.
iii. A SQUARE:
* Show that diagonals AC and BD bisect each other.
* Show that a pair of adjacent sides are equal.
* Show that two diagonals AC and BD are equal.
iv. A RECTANGLE:
* Show that diagonals AC and BD bisect each other.
* Show that two diagonals AC and BD are equal.
Slope is tan x
where, x is angle of inclination.
Finding Slope:
i. m = y1-y2 / x1-x2
If two lines l1 and l2 are PARALLEL, then m1 = m2 ....... [Where, m1 and m2 are the slopes of lines l1
and l2 respectively]
If two lines l1 and l2 are PERPENDICULAR, then m1 * m2 = -1....... [Where, m1 and m2 are the slopes
of lines l1 and l2 respectively]
Slope of all HORIZONTAL LINES is 0..... [Lines parallel to x-axis]
Slope of all VERTICAL LINES is undefined..... [Lines parallel to y-axis. Angle of inclination of ANY line
parallel to y-axis is 90 or 270 degrees]
ii. y = mx+c, when slope (m) and y-intercept (c) are given.
iii. y-y1 = m*(x-x1), when slope (m) and one of the points (x1,y1) on the line are given.
iv. x/a + y/b = 1, when x-intercept (a) and y-intercept (b) are given.
|ax1+by1+c / root(a^2+b^2)|
|c1-c2 / root(a^2+b^2)|
Really sorry for a long break. I will be posting flashcards on "Geometry", the last topic of these
flashcards.
Types of angles:
Figure 1:
1. Adjacent angles: Any 2 angles that share a common side separating the 2 angles and that share a
common vertex.
E.g.: | 1 and | 2 are adjacent angles. [See Figure 1]
2. Vertical angles: Any 2 angles that are not adjacent angles. Vertical angles are EQUAL in measure.
E.g.: | 1 and | 3 are vertical angles. [See Figure 1]
3. Complementary angles: Any 2 angles whose sum is 90 degrees. Complementary angles NEED NOT be
adjacent to each other.
Figure 2:
5. Corresponding Angles: Angles that appear to be in the same relative position in each group of four
angles. Corresponding angles are EQUAL when two parallel lines are cut by a traversal.
E.g.: | 1 and | 5 are corresponding angles. [See Figure 2]
6. Alternate Interior Angles: Angles within the lines being intersected, on opposite sides of the traversal,
and are not adjacent. Alternate interior angles are EQUAL when two parallel lines are cut by a traversal.
E.g.: | 4 and | 6 are alternate interior angles. [See Figure 2]
7. Alternate Exterior Angles: Angles outside the lines being intersected, on opposite sides of the traversal,
and are not adjacent. Alternate exterior angles are EQUAL when two parallel lines are cut by a traversal.
E.g.: | 1 and | 7 are alternate interior angles. [See Figure 2]
8. Consecutive Interior Angles: Angles are same-side interior angles. Consecutive interior angles are
SUPPLEMENTARY when two parallel lines are cut by a traversal.
E.g.: | 4 and | 5 are consecutive interior angles. [See Figure 2]
9. Consecutive Exterior Angles: Angles are same-side exterior angles. Consecutive exterior angles are
SUPPLEMENTARY when two parallel lines are cut by a traversal.
E.g.: | 1 and | 8 are alternate interior angles. [See Figure 2]
* ALTITUDES:
Altitudes are the perpendicular segments from a vertex to the opposite sides. The three lines containing
the altitudes intersect in a single point, which may or may not be inside the triangle.
* MEDIANS:
A Median is the line segment drawn from a vertex to the mid-point of its opposite side. The three
medians meet in one point inside the triangle.
* ANGLE BISECTOR:
Angle bisector is a segment drawn from a vertex that bisects the vertex angle. The three angle bisectors
meet in one point inside the triangle.
TAKEAWAY:
Altitude drawn from the vertex angle can be proven to be a median as well as an angle bisector in an
ISOSCELES triangle.
An equilateral quadrilateral DOES NOT have to be equiangular. [--- Unlike Equilateral Triangle --]
Regular Polygons:
* Sum of INTERIOR angles of a convex polygon with 'n' sides = (n-2) * 180
5 ways:
TAKEAWAY:
A diagonal of a Parallelogram DIVIDES it into 2 congruent triangles.
Isosceles Trapezoids:
Regular Polygons:
* One point in its interior that is equidistant from its vertices is called the center of the regular polygon.
* An Apothegm is a line segment that goes from the center and is perpendicular to one of the polygon's
sides.
Area (regular n-gon) = 1/2 * a * p [a--> Apothegm length and p--> perimeter of regular n-gon]
Similar Polygons:
Similar Triangles:
If two triangles are similar, then the ratio of any two corresponding segments (such as altitudes,
medians, angle bisectors) EQUALS the ratio of any two corresponding sides.
Example:
If QRS ~ TUV,
then QR/TU = RS/UV = QS/TV.
When two triangles are similar, the reduced ratio of any two corresponding sides is called thescale
factor of the similar triangle.
i. If two similar triangles have a scale factor of a:b, the the ratio of their perimeters is a:b.
Example:
ii. If two similar triangles have a scale factor of a:b, then the ratio of their areas is a^2 : b^2.
Example: