You are on page 1of 2

Contents

1) Phases of Class-A surface creation Error! Bookmark not defined.

2) Class-A surface Definition Error! Bookmark not defined.

3) Mathematical Requirements Error! Bookmark not defined.


3.1 Positional Continuity OR 0 - Order continuity Error! Bookmark not defined.
3.2 Tangent Continuity OR 1 - Order continuity Error! Bookmark not defined.
3.3 Curvature Continuity OR 2 - Order continuity Error! Bookmark not defined.

4) Curve Creation Error! Bookmark not defined.


4.1 Curve order Error! Bookmark not defined.
4.2 Case study for curve creation Error! Bookmark not defined.
4.3 Curve Redistribution Error! Bookmark not defined.
4.4 Creation of Symmetry Curves Error! Bookmark not defined.
4.5 Boundary curve creation Error! Bookmark not defined.

5) Surface Creation Error! Bookmark not defined.


5.1 Criteria for surface creation Error! Bookmark not defined.
5.2 Patch/Surface Parameterization Error! Bookmark not defined.
5.3 Patch/Face Plan Error! Bookmark not defined.
5.4 ISO-Curve distribution Error! Bookmark not defined.
5.5 Patch/Face over building and trimming of Patch/Face Error! Bookmark not defined.
5.6 Minimum Descriptive profile for surface creation Error! Bookmark not defined.
5.7 Symmetry Criteria Error! Bookmark not defined.
5.8 Transition Surface Error! Bookmark not defined.
5.9 Surface Completeness Error! Bookmark not defined.
5.10 Fillets Error! Bookmark not defined.

6) Class-A surface verification Error! Bookmark not defined.


6.1 Patch properties Error! Bookmark not defined.
6.2 Connectivity Analysis / G0 - Continuity Error! Bookmark not defined.
6.3 Tangency Analysis / G1-Continuity Error! Bookmark not defined.
6.4 Curvature Analysis Error! Bookmark not defined.
6.5 Reflection Analysis Error! Bookmark not defined.
6.6 Dynamic Highlight Analysis Error! Bookmark not defined.
6.7 Absolute Curvature Analysis Error! Bookmark not defined.
6.8 Mean Curvature Analysis Error! Bookmark not defined.
6.9 Maximum and Minimum Curvature Analysis Error! Bookmark not defined.
6.10 Guassian surface Analysis Error! Bookmark not defined.

7) Curvature Analysis A case study Error! Bookmark not defined.

8) Summary of Class-A Surface Standards Error! Bookmark not defined.


8.1 Classification of components and Applicable Class-A standardsError! Bookmark not defined.
8.2 Class-A Standard-I Error! Bookmark not defined.
8.3 Class-A Standard-II Error! Bookmark not defined.
8.4 Class-A Standard-III Error! Bookmark not defined.

9) Manufacturing Criterias Case studies Error! Bookmark not defined.


9.1 Tips for manufacturability of hood Error! Bookmark not defined.
9.2 Tips for manufacturability of fender Error! Bookmark not defined.
9.3 Tips for manufacturability of Rear quarter panel Error! Bookmark not defined.

You might also like