Professional Documents
Culture Documents
UlHwAdm:
Admission limit on RBS UL HW resource utilization applicable to non-handover guaranteed admission
requests. This parameter is also used together with beMarginUlHw for non-handover non-guaranteed
admission requests.
The UL HW admission policy : UlHwAdm >= beMarginUlHw
DlHwAdm:
Admission limit on RBS DL HW resource utilization applicable to non-handover guaranteed admission
requests. This parameter is also used together with beMarginDlHw for non-handover non-guaranteed
admission requests.
DlHwAdm>= beMarginDlHw
DlCodeAdm:
Admission limit used for admission based on DL channelization code tree usage (percentage of the
tree in use).
The following expression MUST be true: dlCodeAdm >= beMarginDlCode * 5
beMarginDlCode:
Admission margin for DL code utilization in DL (non-handover, non-compressed mode RLs only).
The following expression MUST be true: beMarginDlCode * 5 <= dlCodeAdm
CompModeAdm: Absolute admission limit for the number of radio links in compressed mode in a
cell.
sf8Adm:
Admission policy for admission on the number of Spreading Factor = 8 (traffic class=non-
guaranteed, setup type=<all>) simultaneous connections in a cell in DL (SF histogram).
Default setting is to disable the admission policy.
sf16gAdm
Maximum number of radio links with Spreading Factor (SF) =16 in DL for which new
guaranteed admission requests will continue to be allowed. Reaching or exceeding this number of
radio links (any service class) using DL SF = 16 will block setup/adding any more guaranteed service
class radio links requiring additional DL SF=16 for this cell.
16 means that no blocking of DL SF=16 requests will occur
PwrAdm:
Admission limit for admission on DL cell carrier power.The following expressions MUST be
true:pwrAdm + pwrAdmOffset + pwrOffset <= 100%
PwrAdm>= beMarginDlPwr
PwrAdmOffset:
Relative admission limit on DL cell carrier power.The following expression MUST be true:
PwrAdm +pwrAdmOffset+pwrOffset <= 100%
MinimumRate:
Minimum rate for maximum power mapping.
InterRate:
Intermediate rate for maximum power mapping.
MaxRate:
Maximum rate for maximum power mapping. MinimumRate <= interRate <= maxRate
AseUlAdm:
Admission limit for admission on ASE in UL.
The following expression MUST be true: aseUlAdm >= beMarginAseUl
AseDlAdm:
Admission limit for admission on max capacity (ASE level) in DL.
The following expression MUST be true:aseDlAdm >= beMarginAseDl
BeMarginAseDl:
Relative admission limit for admission on ASE for nonguaranteed bitrate calls
(traffic class 'background' or 'interactive') in DL.
The following expression MUST be true: beMarginAseDl <= aseDlAdm