You are on page 1of 288

ENGINE OILS AUTOMOTIVE GEAR OILS TRANSMISSION/POWER FLUIDS GREASES

INDUSTRIAL FLUIDS INDUSTRIAL GEAR OILS METALWORKING FLUIDS INDUSTRIAL


GAS ENGINE OILS RAILROAD LUBRICANTS FUNCTIONAL PRODUCTS COMPRESSOR
LUBRICANTS PROCESS OILS SMALL ENGINE OILS

AUTOMOTIVE, COMMERCIAL & INDUSTRIAL


PRODUCT GUIDE

2017
FC1
IFC2
2017 Edition
This CITGO Lubricants product guide is your directory to CITGO fluids, greases
and their applications.
Products are not available at all source points. Please check product availability
and container sizes for your normal source point(s).

Technical information and assistance:


Product Answer Line
800-248-4684
lubeshelp@citgo.com

Pre-shipment inquiries:
Order Management
800-331-4068, option 1
ordermanagement@citgo.com

Pricing, availability, post-shipment inquiries:


Customer Service
800-331-4068, option 2
lubescs@citgo.com

Properties shown are based on typical values for the product only and do not constitute a specification. The
information contained herein is subject to change without notice.

The information in this book is provided with no representations or warranties but with good faith on the basis of the
most accurate information available; CITGO accepts no liability for content errors or omissions, or for damages as a
result of relying on information contained within. Consult the owners manual for proper lubricant selection.

CITGO lubricants are prohibited from being repackaged. The reprinting of CITGO labels and other material is also
prohibited.

2017 CITGO Petroleum Corporation. All rights reserved.

Please visit www.citgolubes.com for the most


up-to-date information on products or for Safety Data Sheets.

i
Lubricants Business Unit Quality Statement
CITGO Lubricants is committed to providing our customers with the highest
quality products and services. This will be accomplished by:
Satisfying mutually agreed upon expectations and customer requirements.
Focusing on quality, employee involvement and continuous improvement of
our processes.
Establishing and maintaining an effective quality management system in
compliance with ISO 9001.

Certications Achieved and Maintained


ISO 9001 CITGO Lubricant Plants
ISO 9001 LubeAlert Oil Analysis Program

ii
TABLE OF CONTENTS

ENGINE OILS
PCMO TRANSMISSION/POWER FLUIDS
CITGO SUPERGARD European Formula Motor Oils . . . . . 1 CITGO Final Drive Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 41-42
CITGO SUPERGARD Full Synthetic Motor Oils . . . . . . . 2-3 CITGO Power Steering Fluid with Stop Leak . . . . . . . . . . . 43
CITGO SUPERGARD Motor Oils . . . . . . . . . . . . . . . . . . . 4-5 CITGO QuatraSyn Synthetic Transmission Fluid . . . . . 44-45
CITGO SUPERGARD Synthetic Blend CITGO SynDurance Synthetic All Seasons
SAE 10W-40 Motor Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Heavy-Duty Transmission Fluid . . . . . . . . . . . . . . . . . . . 46
CITGO SUPERGARD Synthetic INTL Motor Oils . . . . . . . 7-8 CITGO TRANSGARD ATF, MERCON V . . . . . . . . . . . . 47
CITGO SUPERGARD UltraLife Motor Oils . . . . . . . . . . . . . 9 CITGO TRANSGARD ATF, Type F . . . . . . . . . . . . . . . . . 48
CITGO TRANSGARD ATF+4 . . . . . . . . . . . . . . . . . . . . . 49
ENGINE OILS CITGO TRANSGARD CVT Fluid . . . . . . . . . . . . . . . . . . . 50
HDEO CITGO TRANSGARD DEXRON-VI ATF . . . . . . . . . . . . 51
CITGO CITGARD 500 Engine Oil . . . . . . . . . . . . . . . . . . . 10 CITGO TRANSGARD Heavy-Duty
CITGO CITGARD 500 HSN Engine Oil Transmission Fluids . . . . . . . . . . . . . . . . . . . . . . . . . 52-53
SAE 20W-50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 CITGO TRANSGARD Multi-Purpose ATF . . . . . . . . . . . . 54
CITGO CITGARD 500 HSN Engine Oil CITGO TRANSGARD Multi-Vehicle
SAE 15W-40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 High-Viscosity ATF . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56
CITGO CITGARD 500 HSN Engine Oils - CITGO TRANSGARD Synthetic Multi-Vehicle
Monogrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Low-Viscosity ATF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
CITGO CITGARD 600 Engine Oils - CITGO TRANSGARD Tractor Hydraulic Fluids . . . . . . 58-59
Monogrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
CITGO CITGARD 600 Multi-Viscosity Grade . . . . . . . . . . 16 GREASES
CITGO CITGARD 700 Synthetic CITGO Cotton Picker Spindle Grease . . . . . . . . . . . . . . . . 60
Blend Engine Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18 CITGO Jet Lubricant TM . . . . . . . . . . . . . . . . . . . . . . . . . . 61
CITGO CITGARD 700 MFE Synthetic CITGO Lithoplex CM & HM Greases . . . . . . . . . . . . . . 62-63
Blend Engine Oil SAE 10W-30 and 15W-40 . . . . . . . 19-20 CITGO Lithoplex MP Greases . . . . . . . . . . . . . . . . . . . . 64-65
CITGO CITGARD HD Engine Oil . . . . . . . . . . . . . . . . . . . 21 CITGO Lithoplex PL Greases . . . . . . . . . . . . . . . . . . . . . . 66
CITGO CITGARD SynDurance PLUS Synthetic CITGO Lithoplex PM Grease . . . . . . . . . . . . . . . . . . . . . . 67
Heavy Duty Engine Oils . . . . . . . . . . . . . . . . . . . . . . . 22-23 CITGO Lithoplex PTG Grease . . . . . . . . . . . . . . . . . . . . . 68
CITGO CITGARD CNG/LNG Engine Oil . . . . . . . . . . . 24-25 CITGO Lithoplex Red MP Grease . . . . . . . . . . . . . . . . . . 69
CITGO Lithoplex RT Greases . . . . . . . . . . . . . . . . . . . . . 70
ENGINE OILS CITGO Lithoplex ST Greases . . . . . . . . . . . . . . . . . . . . . 71
Small Engine Oils CITGO OverDrive HD Grease . . . . . . . . . . . . . . . . . . . 72-73
CITGO Multi-Purpose Air-Cooled 2-Cycle Engine Oil . . . . 26 CITGO Premium Lithium EP Greases . . . . . . . . . . . . . . 74-75
CITGO SUPERGARD Air-Cooled 2-Cycle Engine Oil . . . 27 CITGO Railroad Curve Grease . . . . . . . . . . . . . . . . . . . . . 76
CITGO SUPERGARD Marine Plus CITGO SUPERGARD Marine Plus Grease . . . . . . . . . . . 77
Two-Cycle Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . 28 CITGO SynDurance Premium Synthetic
CITGO SUPERGARD Sea and Snow 460 Grease #00 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
2-Cycle Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 CITGO SynDurance Premium Synthetic
460 Greases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79-80
AUTOMOTIVE GEAR OILS CITGO SynDurance ST Synthetic Greases . . . . . . . . . 81-82
CITGO CITGEAR Standard XD . . . . . . . . . . . . . . . . . . . . 30 CITGO UltraLife CSEP 5M Grease . . . . . . . . . . . . . . . . 83-84
CITGO CITGEAR HD Synthetic Gear Lubricants . . . . . 31-32
CITGO Synthetic Gear Lubricants . . . . . . . . . . . . . . . . . 33-34 INDUSTRIAL FLUIDS
CITGO Premium (LS) Gear Oil . . . . . . . . . . . . . . . . . . . 35-36 CITGO A/W 68 Mining Hydraulic Oil . . . . . . . . . . . . . . . . . . 85
CITGO Premium Gear Oils (MP) . . . . . . . . . . . . . . . . . . 37-38 CITGO A/W Hydraulic Oils . . . . . . . . . . . . . . . . . . . . . . . . . 86
CITGO Regular Gear Oil . . . . . . . . . . . . . . . . . . . . . . . . . . 39 CITGO A/W Hydraulic Oils Super MV . . . . . . . . . . . . . . . . 87
CITGO SUPERGARD Marine Plus Lower Unit CITGO Amplex Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Gear Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 CITGO Cylinder Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Continued

iii
TABLE OF CONTENTS(Contd.)
CITGO ELO 32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90-91 CITGO Pacemaker Gas Engine Oil 1700 Series . . . . 162-163
CITGO FR WG-40XD Hydraulic Fluid . . . . . . . . . . . . . . 92-93 CITGO Pacemaker Gas Engine Oil
CITGO Glycol FR-5046HP . . . . . . . . . . . . . . . . . . . . . . 94-95 1900 XL Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 164-166
CITGO HyDurance AW/AL HVI-100 Fluid . . . . . . . . . . . 96-97 CITGO Pacemaker Gas Engine Oil 700 Series . . . . 167-168
CITGO HyDurance AW All Temp Fluids . . . . . . . . . . . 98-100 CITGO Pacemaker Gas Engine Oil 935 . . . . . . . . . . . . 169
CITGO HyDurance AW CP Fluid . . . . . . . . . . . . . . . 101-102 CITGO Pacemaker Gas Engine Oil 15SL . . . . . . . . . . . . 170
CITGO HyDurance AW Fluids . . . . . . . . . . . . . . . . . . 103-105 CITGO Pacemaker LFG LA 40 Gas Engine Oil . . . . . . . 171
CITGO HyDurance AW Mining Fluid . . . . . . . . . . . . . . . 106
CITGO HyDurance AW NZ Fluids . . . . . . . . . . . . . . . 107-108 RAILROAD LUBRICANTS
CITGO HyDurance AW Super NZ Fluid . . . . . . . . . . 109-110 CITGO Railroad Car Journal Oil No. 9 . . . . . . . . . . . . . . 172
CITGO HyDurance AW Synthetic Fluids . . . . . . . . . 111-112 CITGO RD-969 and RD-1069 Diesel Engine Oils . . . 173-174
CITGO Pacemaker Oils . . . . . . . . . . . . . . . . . . . . . . 113-114 CITGO RD-2069 LE Diesel Engine Oil . . . . . . . . . . . . 175-176
CITGO Pacemaker T Oils . . . . . . . . . . . . . . . . . . . . . 115-116
CITGO Sentry Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 FUNCTIONAL PRODUCTS
CITGO Bar and Chain Oil . . . . . . . . . . . . . . . . . . . . . . . . . 177
INDUSTRIAL GEAR OILS CITGO Concrete Form Oil . . . . . . . . . . . . . . . . . . . . . . . . 178
CITGO CITGEAR MGW-OGL . . . . . . . . . . . . . . . . . . . . . 118 CITGO Diamond Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
CITGO CITGEAR OGL-A . . . . . . . . . . . . . . . . . . . . . . . . . 119 CITGO Hydraulic / Press Oil 68 . . . . . . . . . . . . . . . . . . . . 180
CITGO CITGEAR Synthetic EP Lubricants . . . . . . . 120-121 CITGO Hytherm Oil 46 . . . . . . . . . . . . . . . . . . . . . . . . . . 181
CITGO CITGEAR Synthetic HT Lubricants . . . . . . . 122-123 CITGO Ice Machine Oil 68 . . . . . . . . . . . . . . . . . . . . . . . . 182
CITGO CITGEAR Synthetic PAG Gear Fluids . . . . . . . . 124 CITGO North Star Refrigeration Oils . . . . . . . . . . . . . . . . 183
CITGO CITGEAR WT 320 . . . . . . . . . . . . . . . . . . . . . . . 125 CITGO North Star Refrigeration Oil 68 . . . . . . . . . . . . . . 184
CITGO CITGEAR XCO Oils . . . . . . . . . . . . . . . . . . . . . . 126 CITGO Pacemaker HV Oils . . . . . . . . . . . . . . . . . . . . . . 185
CITGO EP Compounds . . . . . . . . . . . . . . . . . . . . . . . 127-128 CITGO PackGard 220 . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
CITGO EP Gear Semi Synthetic 68 . . . . . . . . . . . . . . . . . 129 CITGO Press Oil 68 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
CITGO MGX Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 CITGO Rock Drill Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
CITGO Pacemaker SD Oils . . . . . . . . . . . . . . . . . . . 131-132 CITGO SATISOL Concrete Form Release . . . . . . . . . . . 189
CITGO Sliderite Oils . . . . . . . . . . . . . . . . . . . . . . . . . 190-191
METALWORKING FLUIDS CITGO Wireline Lubricants . . . . . . . . . . . . . . . . . . . . . . . . 192
CITGO AR Slushing Oil . . . . . . . . . . . . . . . . . . . . . . . . . . 133
CITGO Autokut AS Series . . . . . . . . . . . . . . . . . . . . 134-135 COMPRESSOR LUBRICANTS
CITGO Autokut IS Series . . . . . . . . . . . . . . . . . . . . . 136-137 CITGO CompKleen Synthetic Cleaner . . . . . . . . . . . . . . 193
CITGO Autokut Extrusion Oil . . . . . . . . . . . . . . . . . . . . . . 138 CITGO Compressor Oil 35LP and 45LP . . . . . . . . . . . . . 194
CITGO Autokut Tri-Purpose . . . . . . . . . . . . . . . . . . . 139-140 CITGO Compressor Oil 7585 . . . . . . . . . . . . . . . . . . . . . 195
CITGO CITCOOL 33 Concentrate . . . . . . . . . . . . . . 141-142 CITGO CompressorGard DE . . . . . . . . . . . . . . . . . . 196-197
CITGO CITCOOL SS GP . . . . . . . . . . . . . . . . . . . 143-144 CITGO CompressorGard GE . . . . . . . . . . . . . . . . . . . . . 198
CITGO CITCOOL SS HD . . . . . . . . . . . . . . . . . . . . 145-146 CITGO CompressorGard H Series . . . . . . . . . . . . . . . . . 199
CITGO Quenchol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 CITGO CompressorGard IPG . . . . . . . . . . . . . . . . . . . . 200
CITGO RUST-O-LENE LT . . . . . . . . . . . . . . . . . . . . . . . 148 CITGO CompressorGard PAG . . . . . . . . . . . . . . . . . . . . 201

CITGO RUST-O-LENE ST . . . . . . . . . . . . . . . . . . . . . . . 149 CITGO CompressorGard PAO . . . . . . . . . . . . . . . . . 202-203
CITGO Trukut GP 205 . . . . . . . . . . . . . . . . . . . . . . . . 150-151 CITGO CompressorGard PS 68 Fluid . . . . . . . . . . . . . . . 204
CITGO Trukut HD 220 . . . . . . . . . . . . . . . . . . . . . . . . 152-153 CITGO CompressorGard SS . . . . . . . . . . . . . . . . . . . . . 205
CITGO Tul-Kut Oil Base Cutting Oil Concentrate . . . . . 154 CITGO CompressorGard XA 200 . . . . . . . . . . . . . . . . . . 206
CITGO Gascom R Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
INDUSTRIAL GAS ENGINE OILS CITGO Pacemaker ST-32 . . . . . . . . . . . . . . . . . . . . . . . . 208
CITGO Pacemaker 1640 AE . . . . . . . . . . . . . . . . . . . . . . 155
CITGO Pacemaker Gas Engine Oil 1000 Series . . . . 156-157 PROCESS OILS
CITGO Pacemaker Gas Engine Oil 1200 Series . . . . 158-159 CITGO Procoil Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
CITGO Pacemaker Gas Engine Oil 1600 Series . . . . 160-161

Continued

iv
TABLE OF CONTENTS(Contd.)
REFERENCE INFORMATION
API guide to certification marks, service symbols
& categories (CJ-4 & prior) . . . . . . . . . . . . . . . . . . . 210-212
HDEO Cross Reference Chart . . . . . . . . . . . . . . . . . . . . . 213
SAE J300 viscosity grades for engine oil . . . . . . . . . . . . . 214
SAE J306 automotive gear viscosity classification . . . . . . 214
CITGO Grease Characteristics Chart . . . . . . . . . . . . . . . . 215
NLGI Grease Classifications . . . . . . . . . . . . . . . . . . . . . . . 216
ASTM D 4950 Classification & Specifications for
Automotive Service Greases . . . . . . . . . . . . . . . . . . . . 216
Grease thickener compatibility chart . . . . . . . . . . . . . . . . . 217
Guide to synthetic industrial lubricants . . . . . . . . . . . . 218-220
Compatibility of common elastomers with
CITGO products chart . . . . . . . . . . . . . . . . . . . . . . . . . 221
Compressor OEM fluid cross reference . . . . . . . . . . . 222-225
Understanding ISO cleanliness . . . . . . . . . . . . . . . . . 226-228
Particle counting accuracy . . . . . . . . . . . . . . . . . . . . . 229-231
Use of fire resistant hydraulic fluids . . . . . . . . . . . . . . 232-242
Water glycols compatibility . . . . . . . . . . . . . . . . . . . . . . . . 243
Comparative viscosity classifications, ISO & AGMA . . . . 244
Viscosity blending chart . . . . . . . . . . . . . . . . . . . . . . . 245-246
Metalworking Product Application Guide -
Water Miscible Products . . . . . . . . . . . . . . . . . . . . . . . . 247
Metalworking Product Application Guide - Straight Oils . . 248
Metal removal product offering . . . . . . . . . . . . . . . . . . . . . 249
Metallurgy and machinability . . . . . . . . . . . . . . . . . . . . . . 249
Stationary natural gas engine oil cross reference . . . . . . 250
Stationary natural gas compressor lubricant chart . . . . . . 251
Stationary natural gas compressor application chart . . . . 251
Pacemaker GEO application chart . . . . . . . . . . . . . . . 252-253
EPA amendments to RICE NESHAP . . . . . . . . . . . . . 254-255
CITGO sensitive products list . . . . . . . . . . . . . . . . . . . 256-258
GHS label compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
Lubricant storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260-262
How to take a sample . . . . . . . . . . . . . . . . . . . . . . . . . 263-265
Glossary of common terms & acronyms . . . . . . . . . . 266-268
Products by 40C Viscosity . . . . . . . . . . . . . . . . . . . . . 269-274
Approximate Equivalence of Viscosity
Grading Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275

PRODUCT INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . 276-278


276-277

v
vi
P R O D U C T I N F O R M A T I O N

PCMO Engine Oils


C I T G O S U P E R G A R D
E U R O P E A N F O R M U L A
M O T O R O I L S
Date 05/16

DESCRIPTION: CITGO SUPERGARD European Formula Motor Oils are premium quality, high performance full
synthetic oils formulated for use in certain European vehicles. These specially crafted formulations
contain well-balanced combinations of todays highest quality synthetic base stocks and advanced
additive systems specifically designed to provide superior performance and protection under the most
demanding driving conditions.

QUALITIES: Excellent low-temperature starting and pumpability characteristics


High-temperature/high-shear properties well above conventional oils
Extended drain interval capabilities
Lower volatility when compared to conventional oils
Excellent thermal and oxidation stability
Enhanced protection against varnish buildup and sludge formation in critical engine parts for top
performance and long engine life
Extended engine life due to control of wear and deposit formation

APPLICATIONS: For use in certain Audi, BMW, Mercedes Benz, Porche, Volkswagen and other European vehicles
SAE 5W-40 approved under VW Standard 502 00 and VW Standard 505 00
Consult owners manual for proper fluid specifications.

TYPICAL PROPERTIES:
CITGO SUPERGARD EUROPEAN FORMULA MOTOR OILS

SAE Grade 5W-30 5W-40


Material Code 620883001 620884001
Gravity, ASTM D4052, API 34.52 34.1
Pounds Per Gallon 7.1 7.11
Flash Point, ASTM D92, F (C), COC 442 (228) 450 (232)
Low Temperature Cranking, ASTM D5293
Temperature, F (C) -22 (-30) -22 (-30)
Viscosity, cP 6,030 5,935
Viscosity ASTM D445, cSt at 40C 67.67 82.6
cSt at 100C 11.69 13.6
Viscosity Index, ASTM D2270 169 168
Pour Point, ASTM D97, F (C) -49 (-45) -51 (-46)
Color, ASTM D1500 L2.5 L3.0
API SN Yes Yes
OEM Approvals:
VW 502.00, 505.00 Yes
VW 504.00, 507.00 Pending
BMW Longlife-01 Pending
BMW Longlife-04 Pending
Mercedes Benz 229.5 Pending
Mercedes Benz 229.51 Pending

CITGO and SUPERGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10223C 1 0 2 2 3

Click Here for Return to


PI Sheet Table of Contents
1
P R O D U C T I N F O R M A T I O N
PCMO Engine Oils

C I T G O S U P E R G A R D
F U L L S Y N T H E T I C
M O T O R O I L S
Date 05/16

DESCRIPTION: CITGO SUPERGARD Full Synthetic Motor Oils are well-balanced combinations of todays highest
quality synthetic base stocks and contain an advanced additive system that meets stringent
automotive specifications. They are designed to provide excellent protection in todays high
performance gasoline (including turbocharged and supercharged) engines in passenger cars, vans,
sport utility vehicles, and light trucks. These synthetic engine oils demonstrate improved performance
in todays advanced engine designs, and are available in SAE 0W-16, 0W-20, 5W-20, 5W-30 and
10W-30 viscosity grades.

QUALITIES: Excellent low-temperature starting and pumpability characteristics


High-temperature/high-shear properties well above conventional oils
Lower volatility when compared to conventional oils
Excellent thermal and oxidation stability
Enhanced protection against varnish buildup and sludge formation in critical engine parts for top
performance and long engine life
Extended engine life due to control of wear and deposit formation
Compatible with conventional and synthetic motor oils

APPLICATIONS: CITGO SUPERGARD Full Synthetic Motor Oils are recommended for passenger cars, sport utility
vehicles and light trucks operating on gasoline. They are also recommended for use in gasoline
engines which have been converted to operate on compressed natural gas (CNG), liquified natural
gas (LNG), and liquified petroleum gas (LPG-which includes propane and butane). Consult the vehicle
owners manual for proper engine lubricant selection.
CITGO SUPERGARD Full Synthetic Motor Oils meet the performance requirements for the latest
gasoline-fueled engine service ILSAC GF-5/Resource Conserving (excludes SAE 0W-16) and API SN
and display the API Certification Mark and API Service Symbol. They have also demonstrated benefits
in industry accepted fuel economy tests.
CITGO SUPERGARD Full Synthetic SAE 0W-16 Motor Oil is an ultra-low viscosity engine oil and is
recommended for Original Equipment Manufacturers (OEM) such as Toyota and Honda where a
SAE 0W-16 is specified.
CITGO SUPERGARD Full Synthetic SAE 0W-20 is recommended for Original Equipment
Manufacturers (OEM) such as Toyota and Honda where a SAE 0W-20 is specified. CITGO
SUPERGARD Full Synthetic SAE 0W-20, under material code 620860001, is Approved GM dexos1
License GB1 F0707121.
CITGO SUPERGARD Full Synthetic SAE 5W-20 is Approved GM dexos1 License GB1 F0415121
and provides excellent performance where Ford WSS-M2C945-A is referenced.
CITGO SUPERGARD Full Synthetic SAE 5W-30 is Approved GM dexos1 License GB1 F0422121
and provides excellent performance where Ford WSS-M2C946-A is referenced.
CITGO SUPERGARD Full Synthetic SAE 10W-30 provides excellent performance where a
SAE 10W-30 engine oil is specified.

NOTE: CITGO SUPERGARD Full Synthetic Motor Oils are not recommended for use in diesel
engines. CITGO CITGARD Motor Oils are recommended for these applications. Consult your
owners manual for proper lubricant selection.

(Continued)
(Continued)
CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10144C 1 0 1 4 4

Click Here for Return to


PI Sheet Table of Contents
2
P R O D U C T I N F O R M A T I O N

PCMO Engine Oils


C I T G O S U P E R G A R D F U L L S Y N T H E T I C
M O T O R O I L S
D ate 05/16 - (Continued)
(Continued)

TYPICAL PROPERTIES:

CITGO SUPERGARD FULL SYNTHETIC MOTOR OILS

SAE Grade 0W-16 0W-20 0W-20 5W-20 5W-30 10W-30


(dexos1) (dexos1) (dexos1)

Material Code 620858001 620864001 620860001 620859001 620861001 620863001

Gravity, ASTM D4052, API 32.3 35.0 35.0 34.5 34.2 34.2
Pounds Per Gallon 7.195 7.08 7.08 7.10 7.11 7.11
Flash Point, ASTM D92, 442 (228) 435 (220) 428 (220) 442 (228) 450 (232) 450 (232)
F (C), COC
Low Temperature Cranking,
ASTM D5293
Temperature, F (C) -31 (-35) -31 (-35) -31 (-35) -22 (-30) -22 (-30) -13 (-25)
Viscosity, cP 5,770 5,330 5,190 5,300 4,080 4,000
Viscosity, ASTM D445,
cSt at 40C 37.0 44.4 46.0 52.0 58.5 62.0
cSt at 100C 7.2 8.4 8.5 8.7 10.5 10.2
Viscosity Index, ASTM D2270 160 169 164 145 171 152
Pour Point, ASTM D97, F (C) -38 (-39) -49 (-45) -33 (-36) -33 (-36) -27 (-33) -27 (-33)
Color, ASTM D1500 L3.5 L3.5 L3.5 L3.5 L3.5 L3.5
ILSAC GF-5 Yes Yes Yes Yes Yes
API SN Yes Yes Yes Yes Yes Yes
Licensed GM dexos1 Yes Yes Yes

CITGO and SUPERGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property
of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice.

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10144C 1 0 1 4 4

Click Here for Return to


PI Sheet Table of Contents
3
P R O D U C T I N F O R M A T I O N
PCMO Engine Oils

C I T G O S U P E R G A R D
M O T O R O I L S
Date 03/17

DESCRIPTION: CITGO SUPERGARD Motor Oils are premium quality engine oils designed to provide optimum
performance in high-output gasoline (including turbocharged and supercharged) engines in passenger
cars, vans, sport utility vehicles, and light trucks. The new technology incorporated in this latest-
generation lubricant enables it to exceed manufacturers performance requirements. These engine
oils demonstrate improved performance in todays advanced engine designs. CITGO SUPERGARD is
available in both single and multigrades. The SAE 5W-20 and SAE 5W-30 are classified as synthetic
blends.

QUALITIES: Exceed latest SAE low-temperature pumping viscosity requirements.


Provide improved performance in foaming control.
Provide significantly greater engine cleanliness, wear protection and resistance to oil thickening.
Protect against varnish buildup and sludge formation on critical engine parts.
Control high-temperature deposits in critical ring belt area.
Provide maximum protection against rust and corrosion.
Meet SAE standards for high-temperature/high-shear rate viscosity.
Extend engine life by controlling wear and deposit formation.

SERVICE All viscosity grades are licensed for API SN and are backward compatible with prior API Service
CATEGORIES: Categories (SM, SL, SJ and SH).
SAE 5W-20 and SAE 5W-30 are synthetic blends with API SN, Resource Conserving and
ILSAC GF-5.
SAE 10W-30 API SN, Resource Conserving and ILSAC GF-5.
SAE 5W-20 and 5W-30 Meet the performance requirements of Ford WSS-M2C 945-A and
M2C946-A respectively.
SAE 5W-20 Meets the performance requirements of Honda SAE 5W-20 specification.
SAE 5W-30, 5W-20 Meets the performance requirements of General Motors GM6094M.
Military CID: A-A-52039 (Commercial Item Description, supercedes MIL-L-46152).

APPLICATIONS: CITGO SUPERGARD Motor Oils are recommended for passenger cars, sport utility vehicles, and
light trucks operating on gasoline. CITGO SUPERGARD Motor Oils are also recommended for use in
gasoline engines which have been converted to operate on compressed natural gas (CNG), liquified
natural gas (LNG), and liquified petroleum gas (LPGwhich includes propane and butane). Consult
the vehicle owners manual for proper engine lubricant selection.
CITGO SUPERGARD SAE 5W-20 and 5W-30 are synthetic blends incorporating a high percentage
of synthetic components and meet the performance requirements for latest gasoline-fueled
engine service and display the API Certification Mark. SAE 5W-20, 5W-30, and 10W-30 have also
demonstrated benefits in industry accepted fuel economy tests.
Note: CITGO SUPERGARD Motor Oils are not recommended for use in diesel engines.
CITGO CITGARD Motor Oils are recommended for diesel applications.

(Continued)
(Continued)

CCI ITTGGOO PPeet tr rool leeuumm CCoor rppoor raat ti ioonn 880000/ /224488- -44668844 HHoouusst toonn, , TTeexxaass M
Maannuuffaaccttuurreedd i inn UUSSAA
C10002
C10002

Click Here for Return to


PI Sheet Table of Contents
4
P R O D U C T I N F O R M A T I O N

PCMO Engine Oils


C I T G O S U P E R G A R D
M O T O R O I L S
D(Continued)
ate 07/15 - (Continued)

TYPICAL PROPERTIES:

CITGO SUPERGARD MOTOR OILS

SAE Grade 5W-20 5W-30 10W-30 10W-40 20W-50 30 40

Material Code 620802001 620805001 620813001 620814001 620825001 620903001 620904001

Gravity, ASTM D 4052, API 32.3 32.9 30.6 30.7 28.8 28.7 28.0
Pounds Per Gallon 7.19 7.17 7.27 7.27 7.35 7.35 7.39
Flash Point, ASTM D 92,
COC, F (C) 439 (226) 442 (228) 450 (232) 453 (234) 473 (245) 489 (254) 500 (260)
Low Temperature Cranking,
ASTM D 5293
Temperature, F (C) -22 (-30) -22 (-30) -13 (-25) -13 (-25) 5 (-15)
Viscosity, cP 5,970 5,200 5,770 6,000 6,120
Viscosity:
ASTM D 445, cSt at 40C 49.9 59.3 70 97 163 104 148
ASTM D 445, cSt at 100C 8.15 9.8 10.4 14.1 18.1 11.8 14.7
Viscosity Index, ASTM D 2270 142 151 134 149 123 103 98
Pour Point, ASTM D 97, F (C) -33 (-36) -38 (-39) -33 (-36) -33 (-36) -27 (-33) -22 (-30) 0 (-18)
Color, ASTM D 1500 L3.5 L3.5 L3.5 L3.5 L3.5 L3.5 L4.0
API Service Category SN SN SN SN SN SN SN
API Certification Mark Yes Yes Yes No No No No
Resource Conserving Yes Yes Yes No No No No

CITGO and SUPERGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property
of their respective owners.

C
C II T
TGGO
O P
P ee tt rr oo ll ee uu m
m C
C oo rr pp oo rr aa tt ii oo nn 88 00 00 // 22 44 88 -- 44 66 88 44 H
H oo uu ss tt oo nn ,, T e x a s M a n u f a c t u r e d i n U S A
C10002
C10002

Click Here for Return to


PI Sheet Table of Contents
5
P R O D U C T I N F O R M A T I O N
PCMO Engine Oils

C I T G O S U P E R G A R D S Y N T H E T I C B L E N D
S A E 1 0 W - 4 0 M O T O R O I L
Date 07/15

DESCRIPTION: CITGO SUPERGARD Synthetic Blend SAE 10W-40 Motor Oil is a premium quality engine oil designed
to provide optimum performance in high-output gasoline (including turbocharged and supercharged)
engines in passenger cars, vans, sport utility vehicles, and light trucks. The new technology
incorporated in this latest-generation lubricant enables it to exceed manufacturers performance
requirements. This engine oil demonstrates improved performance in todays advanced engine designs.

QUALITIES: Licensed for API SN.


Exceeds latest SAE low-temperature pumping viscosity requirements.
Provides improved performance in foaming control.
Provides significantly greater engine cleanliness, wear protection and resistance to oil thickening.
Protects against varnish buildup and sludge formation on critical engine parts.
Controls high-temperature deposits in critical ring belt area.
Provides maximum protection against rust and corrosion.
Meets SAE standards for high-temperature/high-shear rate viscosity.
Extends engine life by controlling wear and deposit formation.

APPLICATIONS: CITGO SUPERGARD Synthetic Blend SAE 10W-40 Motor Oil is recommended for passenger cars,
sport utility vehicles, and light trucks operating on gasoline. Consult the vehicle owners manual for
proper engine lubricant selection.
Note: This motor oil is not recommended for use in diesel engines.

TYPICAL PROPERTIES:

CITGO SUPERGARD SYNTHETIC BLEND SAE 10W-40 MOTOR OIL

SAE Grade 10W-40


Material Code 620854001
Gravity, ASTM D 4052, API 30.8
Pounds Per Gallon 7.25
Flash Point, ASTM D 92,
COC, F (C) 453 (234)
Low Temperature Cranking,
ASTM D 5293
Temperature, F (C) -13 (-25)
Viscosity, cP 5,700
Viscosity:
ASTM D 445, cSt at 40C 95
ASTM D 445, cSt at 100C 14.2
Viscosity Index, ASTM D 2270 154
Pour Point, ASTM D 97, F (C) -27 (-33)
Color, ASTM D 1500 L3.5
API Service Category SN

CITGO and SUPERGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

C I T GC
O I TP G
e tOr oPl ee ut rmo l C
e uo m
r p oCroart pi oo nr a t i 8
o0n 0/ 284080- /4264884- 46 H
8 4o u s H
t oonu, s T
t oenx ,a sT e x M
a sa n u M
f aacdt eu r iend Ui n
S AU S A
C10200C 1 0 2 0 0

Click Here for Return to


PI Sheet Table of Contents
6
P R O D U C T I N F O R M A T I O N

PCMO Engine Oils


C I T G O S U P E R G A R D
S Y N T H E T I C
I N T L M O T O R O I L S
Date 03/16

DESCRIPTION: CITGO SUPERGARD Synthetic Motor Oils are well-balanced combinations of todays highest
quality synthetic base stocks and contain an advanced additive system that meets stringent
automotive specifications. They are designed to provide excellent protection in todays high
performance gasoline (including turbocharged and supercharged) engines in passenger cars,
vans, sport utility vehicles, and light trucks. These synthetic engine oils demonstrate improved
performance in todays advanced engine designs, and are available in SAE 0W-20, 5W-20
and 5W-30 viscosity grades.

QUALITIES: Excellent low-temperature starting and pumpability characteristics


High-temperature/high-shear properties well above conventional oils
Lower volatility when compared to conventional oils
Excellent thermal and oxidation stability
Enhanced protection against varnish buildup and sludge formation in critical engine parts
for top performance and long engine life
Extended engine life due to control of wear and deposit formation
Compatible with conventional and synthetic motor oils

APPLICATIONS: CITGO SUPERGARD Synthetic Motor Oils are recommended for passenger cars, sport utility
vehicles and light trucks operating on gasoline. They are also recommended for use in gasoline
engines which have been converted to operate on compressed natural gas (CNG), liquified
natural gas (LNG), and liquified petroleum gas (LPG-which includes propane and butane).
Consult the vehicle owners manual for proper engine lubricant selection.
CITGO SUPERGARD Synthetic Motor Oils meet the performance requirements for the latest
gasoline-fueled engine service ILSAC GF-5/Resource Conserving and API SN and display
the API Certification Mark and API Service Symbol. They have also demonstrated benefits
in industry accepted fuel economy tests.

NOTE: CITGO SUPERGARD Synthetic Motor Oils are not recommended for use in
diesel engines in passenger cars, vans or light trucks. CITGO CITGARD Motor Oils are
recommended for these applications.

(Continued)

CCI TI TGGOO PPe et rt or ol el eu umm CCo or p


r po or a
r at it oi on n 8 80 00 0/ 2/ 24 48 8- 4
- 46 68 84 4 HHo ouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10237C 1 0 2 3 7

Click Here for Return to


PI Sheet Table of Contents
7
P R O D U C T I N F O R M A T I O N
PCMO Engine Oils

C I T G O S U P E R G A R D
S Y N T H E T I C
I N T L M O T O R O I L S
D ate 03/16 - (Continued)
(Continued)

TYPICAL PROPERTIES:

CITGO SUPERGARD SYNTHETIC INTL MOTOR OILS

SAE GRADE 0W-20 5W-20 5W-30

Material Code 620865001 620866001 620867001

Gravity, ASTM D 4052, API 35.0 34.5 34.2


Pounds Per Gallon 7.08 7.10 7.11
Flash Point, ASTM D 92, F (C), COC 428 (220) 442 (228) 450 (232)
Low Temperature Cranking, ASTM D 5293
Temperature, F (C) -31 (-35) -22 (-30) -22 (-30)
Viscosity, cP 5,190 5,300 4,080
Viscosity, ASTM D 445, cSt at 40C 46.0 52.0 58.5
cSt at 100C 8.5 8.7 10.5
Viscosity Index, ASTM D 2270 164 145 171
Pour Point, ASTM D 97, F (C) -33 (-36) -33 (-36) -27 (-33)
Color, ASTM D 1500 L3.5 L3.5 L3.5
ILSAC GF-5 Yes Yes Yes
API SN Yes Yes Yes
Resource Conserving Yes Yes Yes
dexos1 Licensed No No No

CITGO and SUPERGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

CITGO Petroleum Corporation 800/248-4684 Houston, Texas Manufactured in USA


CC10237
ITGO Petroleum Corporation 800/248-4684 Houston, Texas Manufactured in USA
C10237
Click Here for Return to
PI Sheet Table of Contents
8
P R O D U C T I N F O R M A T I O N

PCMO Engine Oils


C I T G O S U P E R G A R D
U L T R A L I F E

M O T O R O I L S
Date 02/16

DESCRIPTION: CITGO SUPERGARD UltraLife Motor Oils are premium quality engine oils designed to improve the life
of older, higher-mileage engines. They will provide optimum performance in higher mileage gasoline
engines including turbocharged and supercharged engines found in passenger cars, vans, sport utility
vehicles, and light trucks. These oils are formulated with highly refined base oils and additive systems
that will handle those problems associated with older, higher-mileage engines that have exceeded
their warranty.

BENEFITS: CITGO SUPERGARD UltraLife Motor Oils benefits your engine in the following ways:
Provides extra wear protection
Provides improved seal conditioning to help reduce oil leakage and valve deposits
Offers excellent resistance to oil burn-off
Provides extra cleaning to critical engine parts
Helps improve overall engine performance
Offers excellent oxidation and thermal stability to help maintain engine cleanliness and deposit formation
Consult the owners manual for proper lubricant selection.

APPLICATIONS: CITGO SUPERGARD UltraLife Motor Oils are recommended for the older higher mileage, rebuilt, and
new passenger cars, sport utility vehicles and light trucks operating on gasoline. CITGO SUPERGARD
UltraLife Motor Oils are available in SAE 5W-20, 5W-30, 10W-30, and 10W-40 grades, are licensed for
API SN, and are backward compatible with prior API Service Categories (SM, SL and SJ). Addition-
ally, the SAE 5W-20, 5W-30 and SAE 10W-30 grades are licensed ILSAC GF-5 Resource Conserving.

TYPICAL PROPERTIES:

CITGO SUPERGARD ULTRALIFE MOTOR OILS

SAE Grade 5W-20 5W-30 10W-30 10W-40


Material Code 620891001 620892001 620893001 620894001
Gravity, ASTM D 4052, API 32.1 32.6 30.7 31.0
Density, lb/gal at 60F 7.20 7.18 7.27 7.25
Flash point, COC, ASTM D 92, F (C) 450 (232) 450 (232) 450 (232) 453 (234)
Viscosity ASTM D 445, cSt at 40C 48.8 65.7 73.5 102.0
cSt at 100C 8.3 10.9 11.0 15.0
Viscosity Index 150 158 139 154
Pour Point, ASTM D 97, F (C) -42 (-41) -38 (-39) -44 (-42) -38 (-39)
Low Temperature Cranking at
-22 F (-30C), ASTM D 5293, cP 6,280 6,250
Low Temperature Cranking at
-13 F (-25C), ASTM D 5293, cP 6,180 6,080
Low Temperature Pumping at
-31F (-35C), ASTM D 4684, cP 21,200 29,300
Low Temperature Pumping at
-22F (-30C), ASTM D 4684, cP 23,200 31,500
Yield Stress, Pa <35 <35 <35 <35

CITGO, SUPERGARD and UltraLife are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks
or trademarks are the property of their respective owners.

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10124C 1 0 1 2 4

Click Here for Return to


PI Sheet Table of Contents
9
P R O D U C T I N F O R M A T I O N
HDEO Engine Oils

C I T G O C I T G A R D
5 0 0 E N G I N E O I L
Date 06/15

DESCRIPTION: CITGO CITGARD 500 Engine Oil SAE 25W-60 is specially formulated and engineered for diesel
engines operating in severe conditions requiring extra protection to maintain engine cleanliness and
wear protection. CITGO CITGARD 500 Engine Oil SAE 25W-60 is also excellent for higher mileage or
older diesel engines by providing improved engine cylinder liner oil film retention that improves piston
ring and liner sealing resulting in reduced oil consumption and improved engine efficiency.

QUALITIES: CITGO CITGARD 500 Engine Oil SAE 25W-60 is formulated with a balanced base oil and additive
combination to deliver balanced protection.
The formulation provides added corrosive wear protection to neutralize the harmful effects of fuel
sulfur acid.
The SAE 25W-60 multi-grade maintains a stable viscosity and protective oil film when operating at
higher loads and temperatures.
The performance benefits include overall engine cleanliness, reduced oil consumption and higher
sulfur fuel neutralization.

APPLICATIONS: CITGO CITGARD 500 Engine Oil SAE 25W-60 is recommended for diesel engines operating in a
variety of severe conditions and an excellent choice for such transit bus applications and other fleet
operations that can benefit from a high performance diesel engine oil.

TYPICAL PROPERTIES:

CITGO CITGARD 500 ENGINE OIL SAE 25W-60

SAE Grade 25W-60


Material Code 622225001
Gravity, ASTM D 4052, API 27.7
Density, lbs/gal at 60F 7.40
Flash Point, ASTM D 92 (COC), F (C) 500 (260)
Viscosity ASTM D 445, cSt at 40C 248
cSt at 100C 23.9
Viscosity Index, ASTM D 2270 120
Pour Point, ASTM D 97, F (C) -17 (-27)
Sulfated Ash, ASTM D 874, m% 1.15
Total Base Number, ASTM D 2896, mg KOH/g 10

CITGO and CITGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGO PG
CIT e tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10219C 1 0 2 1 9

Click Here for Return to


PI Sheet Table of Contents
10
P R O D U C T I N F O R M A T I O N

HDEO Engine Oils


C I T G O C I T G A R D
5 0 0 H S N E N G I N E O I L
S A E 2 0 W - 5 0
Date 09/15

DESCRIPTION: CITGO CITGARD 500 HSN Engine Oil SAE 20W-50 is specially formulated and engineered for
diesel engines operating in severe conditions requiring extra protection to maintain engine cleanliness
and wear protection. CITGO CITGARD 500 HSN Engine Oil SAE 20W-50 is also an excellent
choice for higher mileage or older diesel engines. It provides improved engine cylinder liner oil film
retention that improves piston ring and liner sealing resulting in reduced oil consumption and improved
engine efficiency.

QUALITIES: CITGO CITGARD 500 HSN Engine Oil SAE 20W-50 is formulated with a balanced base oil and
additive combination to deliver balanced protection.
The higher TBN (Total Base Number) formulation provides added corrosive wear protection to
neutralize the harmful effects of fuel sulfur acid.
The SAE 20W-50 multi-grade maintains a stable viscosity and protective oil film when operating at
higher loads and temperatures.
The performance benefits include overall engine cleanliness, reduced oil consumption and higher
sulfur fuel neutralization.

APPLICATIONS: CITGO CITGARD 500 HSN Engine Oil SAE 20W-50 is recommended for diesel engines operating
in a variety of severe conditions and an excellent choice for transit bus applications and other fleet
operations that can benefit from a high performance diesel engine oil.

TYPICAL PROPERTIES:

CITGO CITGARD 500 HSN ENGINE OIL SAE 20W-50

SAE Grade 20W-50


Material Code 622216001
Gravity, ASTM D 4052, API 28.7
Density, lbs/gal at 60F 7.36
Flash Point, ASTM D 92 (COC), F (C) 471 (244)
Viscosity ASTM D 445, cSt at 40C 164
cSt at 100C 18.6
Viscosity Index, ASTM D 2270 128
Pour Point, ASTM D 97, F (C) -44 (-42)
Sulfated Ash, ASTM D 874, m% 1.3
Total Base Number, ASTM D 2896, mg KOH/g 11

CITGO and CITGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10222C 1 0 2 2 2

Click Here for Return to


PI Sheet Table of Contents
11
P R O D U C T I N F O R M A T I O N
HDEO Engine Oils

C I T G O C I T G A R D
5 0 0 H S N E N G I N E O I L
S A E 1 5 W - 4 0
Date 09/15

DESCRIPTION: CITGO CITGARD 500 HSN Engine Oil SAE 15W-40 is specially formulated for turbo charged diesel
engines operating in severe conditions and using higher sulfur fuel. CITGO CITGARD 500 HSN
Engine Oil SAE 15W-40 is designed to provide improved performance for older engines and newer
engines that are not equipped with diesel particulate filters.

QUALITIES: CITGO CITGARD 500 HSN Engine Oil SAE 15W-40 is formulated with a balanced base oil and
additive combination to deliver optimum performance.in the critical areas of lubrication.
The higher TBN (Total Base Number) formulation provides added corrosive wear protection to
neutralize the harmful effects of fuel sulfur acid.
The SAE 15W-40 multi-grade maintains a stable viscosity and protective oil film when operating at
higher loads and temperatures.
The performance benefits include overall engine cleanliness, reduced oil consumption and improved
engine cold cranking start up protection.

APPLICATIONS: CITGO CITGARD 500 HSN Engine Oil SAE 15W-40 is recommended for turbocharged and naturally
aspirated diesel engines operating with higher sulfur fuel. CITGO CITGARD 500 HSN Engine Oil
SAE 15W-40 is also recommended for Caterpillar ECF-2.

TYPICAL PROPERTIES:

CITGO CITGARD 500 HSN ENGINE OIL SAE 15W-40

SAE Grade 15W-40


API Service Category CI-4/SL
Material Code 622215001
Gravity, ASTM D 4052, API 30.0
Density, lbs/gal at 60F 7.30
Flash Point, ASTM D 92 (COC), F (C) 450 (232)
Viscosity ASTM D 445, cSt at 40C 120
cSt at 100C 15.8
Viscosity Index, ASTM D 2270 139
Pour Point, ASTM D 97, F (C) -38 (-39)
Sulfated Ash, ASTM D 874, m% 1.3
Total Base Number, ASTM D 2896, mg KOH/g 11.3

CITGO and CITGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

C I T G OC IPT eGt O
r o lPeeutm
r o lCeourm
p oCr ao tr ipoonr a t i8o0n0 / 2 8
4080
- 4/ 26 48 84 - 4 6H8 o4 u s t H
ono ,u sTt eo xn a, sT e xMa as n u fM
aac tduer ei nd U
i nS A
USA
C10211 C 1 0 2 1 1

Click Here for Return to


PI Sheet Table of Contents
12
P R O D U C T I N F O R M A T I O N

HDEO Engine Oils


C I T G O C I T G A R D
5 0 0 H S N E N G I N E O I L S
M O N O G R A D E S
Date 09/15

DESCRIPTION: CITGO CITGARD 500 HSN Engine Oils SAE 40 and SAE 50 are specially formulated and engineered
for diesel engines operating in severe conditions requiring extra protection to maintain engine
cleanliness and wear protection. CITGO CITGARD 500 HSN Engine Oils SAE 40 and SAE 50 are
also excellent choices for higher mileage or older diesel engines operating in warmer climates. The
additive technology provides improved engine cylinder liner oil film retention that improves piston ring
and liner sealing resulting in reduced oil consumption and improved engine efficiency.

QUALITIES: CITGO CITGARD 500 HSN Engine Oils SAE 40 and SAE 50 are formulated with a balanced base oil
and additive combination to deliver balanced protection.
The higher TBN (Total Base Number) formulation provides added corrosive wear protection to
neutralize the harmful effects of fuel sulfur acid.
The performance benefits include overall engine cleanliness, reduced oil consumption and higher
sulfur fuel neutralization.

APPLICATIONS: CITGO CITGARD 500 HSN Engine Oils SAE 40 and SAE 50 are recommended for diesel engines
operating in a variety of severe conditions and an excellent choice for transit bus applications and
other fleet operations that can benefit from a high performance diesel engine oil.

TYPICAL PROPERTIES:

CITGO CITGARD 500 HSN ENGINE OILSMONOGRADES

SAE Grade 40 50
Material Code 622211001 622212001
Gravity, ASTM D 4052, API 27.2 27.1
Density, lbs/gal at 60F 7.42 7.43
Flash Point, ASTM D 92 (COC), F (C) 486 (252) 482 (250)
Viscosity ASTM D 445, cSt at 40C 136 207
cSt at 100C 14.1 19.0
Viscosity Index, ASTM D 2270 101 103
Pour Point, ASTM D 97, F (C) -22 (-30) -27 (-33)
Sulfated Ash, ASTM D 874, m% 1.3 1.3
Total Base Number, ASTM D 2896, mg KOH/g 11 11

CITGO and CITGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10221C 1 0 2 2 1

Click Here for Return to


PI Sheet Table of Contents
13
P R O D U C T I N F O R M A T I O N
HDEO Engine Oils

C I T G O C I T G A R D
6 0 0 E N G I N E O I L S
M O N O G R A D E S
Date 3/17

DESCRIPTION: CITGO CITGARD 600 Engine Oils Monogrades are high quality, heavy-duty crankcase oils. This
product line is manufactured with the latest additive technologies to provide excellent performance.
SAE 30, 40, and 50 viscosity grades are designed with low sulfated ash to give optimal performance
in Detroit Diesel Two Stroke Cycle diesel engines calling for obsolete service category CF-2. These
mono-grade products also meet the performance requirements of obsolete service category CF.

PERFORMANCE Excellent detergency control of exhaust port deposits in Detroit Diesel Two-stroke cycle
BENEFITS: diesel engines.
Excellent dispersancy and oxidation resistance protect against excessive viscosity increase.
Superior wear protection in hydraulic pumps and Detroit Diesel Two-stroke cycle diesel engines.
Good TBN properties protect against corrosive wear.
Proven oil consumption control in heavy duty service.
Shear stability of mono-grades assures stay-in-grade performance.
Meets Detroit Diesel recommendations of 1.0% maximum sulfated ash for Two-stroke cycle
diesel engines.

PERFORMANCE CF-2
CAPABILITIES*: CF
*Some performance capabilities are applicable to specific viscosity grade(s).

APPLICATIONS:: CITGO CITGARD 600 Engine Oils Monogrades are intended for use in heavy-duty service in
commercial trucks, agricultural equipment, construction equipment, and other diesel fueled engine,
hydraulic, and transmission applications. Specific viscosity grades are approved for use in power-
shift, manual, and hydrostatic transmissions, final drives, and hydraulic systems where the equipment
manufacturer designates the use of a heavy-duty, detergent-type engine oil. See CITGARD 600
Multi-Grade Product Information Sheet for more options. Check Owners Manuals for specific viscosity
grade and API Service Category recommendations.

(Continued)

(Continued)

CCIITTG
GOO PPeettrroolleeuum
m CCoorrppoorraattiioonn 880000//224488--44668844 HHoouussttoonn,, TT e x a s M a n u f a c t u r e d i n U S A
C10005A
C10005A

Click Here for Return to


PI Sheet Table of Contents
14
P R O D U C T I N F O R M A T I O N

HDEO Engine Oils


C I T G O C I T G A R D
6 0 0 E N G I N E O I L S
M O N O G R A D E S
(Continued)
D ate 03/17 - (Continued)

TYPICAL PROPERTIES:

CITGO CITGARD 600 ENGINE OILSMONOGRADES

SAE Grade 10W 30 40 50

Material Code 622610001 622630001 622640001 622650001


Gravity, ASTM D 4052, API 31.8 28.4 27.3 26.5
Pounds Per Gallon 7.22 7.37 7.42 7.46
Flash Point, ASTM D 92 (COC), F (C) 439 (226) 489 (254) 486 (252) 482 (250)
Viscosity, ASTM D 445, cSt at 100C 6.9 12.0 14.9 19.0
ASTM D 445, cSt at 40C 41 102 145 212
Viscosity Index, ASTM D 2270 129 106 103 100
HTHS Rate Vis at 150C & 106 sec-1, cP 2.3 3.6 4.3 5.1
CCS Vis, ASTM D 5293, cP at C 4,000 at -25 NR* NR* NR*
MRV Vis, ASTM D 4684, cP at C 10,000 at -30 NR* NR* NR*
MRV Yield Stress, ASTM D 4684, Pa at C <35 at -30 NR* NR* NR*
Pour Point, ASTM D 97, F (C) -38 (-39) -11 (-24) +10 (-12) +10 (-12)
Sulfated Ash, ASTM D 874, %m 0.9 0.9 0.9 0.9
TBN (Total Base No.), ASTM D 2896 8 8 8 8
Color, ASTM D 1500 (may vary by location) L3.0 L3.0 L4.0 L4.0

KEY PERFORMANCE CLAIMS AND APPLICATIONS:


Obsolete Service Categories
CF-2
CF
*NR = No Requirement

CITGO and CITGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

C I T G O P e t r o l e u m C o r p o r a t i o n 8 0 0 / 2 4 8 - 4 6 8 4 H o u s t o n , Te x a s M a n u f a c t u r e d i n U S A
C10005A
C10005A

Click Here for Return to


PI Sheet Table of Contents
15
P R O D U C T I N F O R M A T I O N
HDEO Engine Oils

C I T G O C I T G A R D
6 0 0 E N G I N E O I L S
Date 11/16

DESCRIPTION: CITGO CITGARD 600 Engine Oils use superior technology to protect low-emissions engines equipped
with exhaust after-treatment systems and other new design features. These products meet the API CJ-4
heavy duty requirements as well as existing API CI-4 PLUS and earlier categories.

PERFORMANCE Formulated specifically for low emission engines equipped with EGR, DOC and SCR
BENEFITS: Provides advanced soot control utilizing SootArrest, soot dispersant chemistry
Offers advantages for heavy duty commercial trucks and other diesel-fueled applications, including
off-road equipment
State-of-the-art wear control technology for reduced wear
Exceptional oxidation and thermal protection for operating at extreme temperatures
Extends diesel particulate filter (DPF) life
SAE 10W-30 improves fuel economy and cold cranking lubrication

PERFORMANCE Equipment requiring API CJ-4, CI-4 PLUS, CI-4, CH-4/SN


CAPABILITIES: Detroit Diesel 93K218
Caterpillar ECF-3
Mack EO-O Premium Plus
Cummins CES 20081
Volvo VDS-4
Mercedes 228.31

APPLICATIONS: Recommended for use in heavy-duty service in commercial trucks, agricultural equipment, construction
equipment, stationary engines, and other diesel-fueled engine applications.

TYPICAL PROPERTIES:

CITGO CITGARD 600 ENGINE OILS

SAE Grade 15W-40 10W-30


Material Code 622615001 622613001
Gravity, ASTM D 4052, API 30.1 31.5
Density, lbs/gal 7.32 7.25
Flash Point, ASTM D 92 (COC), F (C) 450 (232) 450 (232)
Viscosity, ASTM D 445, cSt at 140C 118 83
Viscosity, ASTM D 445, cSt at 100C 15.6 12.3
Viscosity Index, ASTM D 2270 139 141
HTHS Rate Viscosity at 150C, ASTM D 4683, cP 4.3 3.5
CCS Viscosity, ASTM D 5293, cP 5,850 at -20C 6,250 at -25C
MRV Pumpability, ASTM D 4684, cP 16,100 at -25C 23,000 at -30C
MRV Yield Stress, ASTM D 4684 <35 at -25C <35 at -30C
Pour Point, ASTM D 97, F (C) -22 (-30) -37 (-39)
Color, ASTM D 1500 L3.5 L3.0
Sulfated Ash, ASTM D 874, m% 1.0 1.0
Total Base Number, ASTM D 2896, mg KOH/g 10 10
______
CITGO and CITGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to
change without notice.

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeexxaass MMaannuuf faacct tuur reedd i inn UUSSAA
C10005B
C10005B

Click Here for Return to


PI Sheet Table of Contents
16
P R O D U C T I N F O R M A T I O N

HDEO Engine Oils


C I T G O C I T G A R D
7 0 0 S Y N T H E T I C B L E N D
E N G I N E O I L S
Date 12/16

DESCRIPTION: CITGO CITGARD 700 Synthetic Blend Engine Oils deliver the performance needed for newer
engine designs while improving performance in older engines. Engineered with a proprietary additive
technology that protects engines running at higher operating temperatures and fuel injection pressures,
while meeting tighter wear limits and lower emission requirements. SAE 10W-30 viscosity grade assists
in attaining the new Phase II fuel efficiency standards by improving fuel economy, increasing cold start
up lubrication, and providing superior engine durability.

PERFORMANCE SAE 10W-30 offers up to 3% fuel economy advantage over conventional SAE 15W-40 viscosity
BENEFITS: grade oils
Maintains viscosity over extended service drain intervals
Up to 100% increase in oxidation protection compared to conventional CJ-4 engine oils Always follow
OEM recommendations when extending oil drain intervals
Advanced wear protection in older and newer engines
Reduced air entrainment in high pressure hydraulic fuel injection systems

RECOMMENDED Equipment requiring: Detroit Diesel DFS 93K 222


FOR: API CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4/SN Mercedes 228.31
(SN applies to 15W-40 only) Paccar
Caterpillar ECF-3 Volvo/Mack/Renault - VDS-4.5/EOS-4.5/RLD-4
Cummins CES 20086 Ford WSS-M2C171-F1
Note: Use of diesel engine oils in automotive gasoline engines can shorten the life of catalytic converters.

APPLICATIONS: CITGO CITGARD 700 Synthetic Blend Engine Oils provide superior performance for commercial
trucks, agricultural equipment, construction equipment, stationary engines, and other diesel-fueled
engine applications. Consult owners manual for proper lubricant selection.

API Comparison Chart


CITGARD 700 CITGARD 700
Category API CJ-4 API CK-4
Back serviceable YES YES
Viscosity grades 15W-40/10W-30 15W-40/10W-30
Fleet million mile engine test rating Better Best
100% improved oxidation stability NO YES
Greater shear stability vs. conventional API CJ-4 YES YES
Aeration control vs. conventional API CJ-4 Better Best
SAE 10W-30 sustains improved fuel economy through Better Best
50,000 miles
Compatible with conventional API CJ-4 oils YES YES
Best Overall Performance and Backward compatibility Better Best

(Continued)

CCI ITTGGOO PPeet trrool leeuumm CCoorrppoorraat ti ioonn 880000/ /224488--44668844 HHoouusst toonn, , TTee xx aa ss M
M aa nn uu ff aa cc tt uu rr ee dd ii nn U
U SS AA
C10246
C10246

Click Here for Return to


PI Sheet Table of Contents
17
P R O D U C T I N F O R M A T I O N
HDEO Engine Oils

C I T G O C I T G A R D
7 0 0 S Y N T H E T I C B L E N D
E N G I N E O I L S
Date 12/16 - (Continued)

Volvo T-13 Oxidation Stability Test vs API CK-4


CITGARD 700 API CK-4 Reduces oil oxidation by 100%


CITGARD 700 CK-4


TYPICAL PROPERTIES:
CITGO CITGARD 700 SYNTHETIC BLEND ENGINE OILS

SAE Grade 10W-30 15W-40


Material Code 622721001 622723001
Gravity, ASTM D4052, API at 60F 31.6 30.5
Pounds/Gallon at 60F 7.25 7.30
Specific Gravity at 60F 0.87 0.88
Viscosity at 40C, cSt 80.9 111.9
Viscosity at 100C, cSt 11.9 15.2
Viscosity Index 142 141
CCS Viscosity, cP, @ Temperature 6,159 @ -25C 4677 @ -20C
MRV Viscosity, cP, @ Temperature 23,250 @ -30C 19,968 @ -25C
MRV Yield Stress, Pa, @ Temperature <35 <35
Pour Point, F (C) -38 (-39) -33 (-36)
Flash Point, COC, F (C) 435 (224) 439 (226)
Noack Evaporative, ASTM D5800, % Loss 12.0 11.0
Color, ASTM D1500 L3.0 L3.5
Total Base Number, ASTM D2896 10 10
Sulfated Ash, ASTM D874, % wt 1.0 1.0
______
CITGO and CITGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

C
C II TT G
GOO PP ee tt rr oo ll ee uu m
m C
C oo rr pp oo rr aa tt ii oo nn 88 00 00 // 22 44 88 -- 44 66 88 44 H
H oo uu ss tt oo nn ,, TT ee xx aa ss M
M aa nn uu ff aa cc tt uu rr ee dd ii nn U
USSA
A
C10246
C10246

Click Here for Return to


PI Sheet Table of Contents
18
P R O D U C T I N F O R M A T I O N

HDEO Engine Oils


C I T G O C I T G A R D 7 0 0 M F E S Y N T H E T I C
B L E N D E N G I N E O I L
D a t e 11 / 1 6

DESCRIPTION: CITGO CITGARD 700 MFE Synthetic Blend Engine Oil SAE 10W-30 is engineered for maximum fuel
efficiency and API FA-4 compliant engines. Formulated with proprietary additive technology that protects
engines running at higher operating temperatures and higher fuel injection pressures, while meeting
tighter wear limits and lower emission requirements. Provides additional fuel economy compared to API
CK-4 or API CJ-4 SAE 10W-30 engine oils.

CITGO CITGARD 700 MFE Synthetic Blend SAE 10W-30 Engine Oil is a new generation engine oil that
supports the Phase II fuel efficiency standards which are driving the need for even more fuel efficient
heavy duty engine oils combined with excellent wear protection and engine durability.

PERFORMANCE Up to 4% fuel economy advantage over conventional SAE 15W-40 viscosity grade oils
BENEFITS: Maintains viscosity over extended service intervals
Up to 100% increase in oxidation protection compared to conventional CJ-4 engine oils. Always
follow OEM recommendations when extending oil drain intervals
Advanced wear protection for newer FA-4 compliant engines
Reduced air entrainment in high pressure hydraulic fuel injection systems

RECOMMENDED API FA-4 Compliant Engines


FOR: Cummins CES 20087
Detroit Diesel DFS 93K223

APPLICATIONS: CITGO CITGARD 700 MFE Synthetic Blend SAE 10W-30 Engine Oil is engineered for API FA-4
compliant engines. Consult owners manual for proper lubricant selection.

CITGARD 700 MFE Synthetic Blend Engine Oil vs API CK-4 or CJ-4.

(Continued)

CCI ITTGGOO PPeet trrool leeuumm CCoorrppoorraat ti ioonn 880000/ /224488--44668844 HHoouusst toonn, , TTee xx aa ss M
M aa nn uu ff aa cc tt uu rr ee dd ii nn U
U SS AA
C10247
C10247

Click Here for Return to


PI Sheet Table of Contents
19
P R O D U C T I N F O R M A T I O N
HDEO Engine Oils

C I T G O C I T G A R D 7 0 0 M F E S Y N T H E T I C
B L E N D E N G I N E O I L
D a t e 11 / 1 6 - ( C o n t i n u e d )

Volvo-T-13 Oxidation Stability

CITGARD 700 MFE 10W-30


CITGARD 700 MFE 10W-30

TYPICAL PROPERTIES:
CITGO CITGARD 700 MFE SYNTHETIC BLEND ENGINE OIL SAE 10W-30

SAE Grade 10W-30


Material Code 622722001
Gravity, ASTM D4052, API at 60F 31.5
Pounds/Gallon at 60F 7.25
Specific Gravity at 60F 0.87
Viscosity at 40C, cSt 66
Viscosity at 100C, cSt 10.0
Viscosity Index 136
CCS Viscosity, cP, @ Temperature 5,680 @ -25C
MRV Viscosity, cP, @ Temperature 15,500 @ -30C
MRV Yield Stress, Pa, @ Temperature <35
Pour Point, F (C) -33 (-36)
Flash Point, COC, F (C) 446 (230)
Noack Evaporative, ASTM D5800, % Loss 12.7
Color, ASTM D1500 L3.5
Total Base Number, ASTM D2896 10
Sulfated Ash, ASTM D874, % wt 1.0
______
CITGO and CITGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to
change without notice.

CCIITTG
GOO PPeettrrool leeuum
m CCoorrppoorraatti ioonn 880000//224488--44668844 HHoouussttoonn,, TTee xx aa ss M
M aa nn uu ff aa cc tt uu rr ee dd ii nn U
USSA
A
C10247
C10247

Click Here for Return to


PI Sheet Table of Contents
20
P R O D U C T I N F O R M A T I O N

HDEO Engine Oils


C I T G O C I T G A R D
H D E N G I N E O I L
Date 06/15

DESCRIPTION: CITGO CITGARD HD Engine Oil is a heavy duty engine oil designed for both older and newer
diesel engines equipped with low emission technology. CITGARD HD Engine Oil is recommended
for equipment owners operating within normal duty cycles and maintaining engine manufacturer
recommended oil change intervals. This product meets the API CJ-4 and earlier API Categories.
QUALITIES: Clean engine Detergent Additive System
Soot Control Protection
Wear reduction additive technology
Protects against viscosity breakdown
Corrosive Wear Protection

APPLICATIONS: Caterpillar ECF-3


Mack EO-O Premium Plus
Volvo VDS-4
Cummins CES 20081
Detroit Diesel DDS 93K218
API ServiceAPI CJ-4, CI-4 Plus, CI-4, CH-4/SM

TYPICAL PROPERTIES:

CITGO CITGARD HD ENGINE OIL

SAE Grade 15W-40

Material Code 622515001

Gravity, ASTM D 4052, API 29.7


Density, lbs/gal 7.31
Flash Point, ASTM D 92 (COC), F (C) 442 (228)
Viscosity ASTM D 445, cSt at 40C 117
cSt at 100C 15.6
Viscosity Index, ASTM D 2270 142
HTHS Rate Viscosity at 150C, ASTM D 4683, cP 4.2
CCS Viscosity at -20C, ASTM D 5293, cP 5800
MRV Pumpability at -25C, ASTM D 4684, cP 17000
MRV Yield Stress at -25C, ASTM D 4684 <35
Pour Point, ASTM D 97, F (C) -33 (-36)
Color, ASTM D 1500 L4.5
Sulfated Ash, ASTM D 874, m% 1.0

CITGO and CITGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, sTt oe nx ,a sT e x M
a sa n u M
f aacdt u
ere
i nd Ui nS AU S A
C10201C 1 0 2 0 1

Click Here for Return to


PI Sheet Table of Contents
21
P R O D U C T I N F O R M A T I O N
HDEO Engine Oils

C I T G O C I T G A R D S Y N D U R A N C E P L U S
S Y N T H E T I C H E A V Y D U T Y E N G I N E O I L S
Date 3/17

DESCRIPTION: CITGO CITGARD SynDurance PLUS Synthetic Heavy Duty Engine Oils Advanced Fuel Efficiency
formula delivers maximum fuel economy, extreme cold temperature performance and superior engine
durability. These engine oils contain a careful balance of synthetic base oil components with a shear
stable viscosity modifier, which insures heavily loaded engine parts have protective oil films.
CITGO CITGARD SynDurance PLUS Synthetic Heavy Duty Engine Oils meet the performance
requirements of newer engines operating at higher temperatures, with lower RPM, higher torque and
advanced combustion design.
CITGO CITGARD SynDurance PLUS Synthetic Heavy Duty Engine Oils have been field tested for
over a million miles with engine teardown inspections compared to premium SAE 15W-40 viscosity
grade oils. The results indicate superior wear protection and oil consumption control.

BENEFITS: Up to 4% fuel economy advantage over conventional SAE 15W-40 viscosity grade oils
Longer starter/battery life with reduced dependency on block heaters resulting in lower energy costs
Up to 100% increase in oxidation protection compared to conventional CJ-4 engine oils. Always
follow OEM recommendations when extending oil drain intervals
Reduced air entrainment in high pressure fuel injection systems
Addresses the environmental challenge of reducing greenhouse gases and carbon foot print

APPLICATIONS: RECOMMENDED FOR:


API CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4
Caterpillar ECF-3
Cummins CES 20086
Detroit Diesel DFS 93K222
Volvo/Mack/Renault VDS-4.5/EOS-4.5/RLD-4
Mercedes 228.31
Navistar
Ford WSS-M2C171-F1 (5W-40 Only)

(Continued)

CCI ITTGGOO PPeet tr rool leeuumm CCoor rppoor raat ti ioonn 880000/ /224488- -44668844 HHoouusst toonn, , TTeexxaass M
Maannuuffaaccttuurreedd i inn UUSSAA
C10234
C10234

Click Here for Return to


PI Sheet Table of Contents
22
P R O D U C T I N F O R M A T I O N

HDEO Engine Oils


C I T G O C I T G A R D S Y N D U R A N C E P L U S
S Y N T H E T I C H E A V Y D U T Y E N G I N E O I L S
Date 3/17 - (Continued)
(Continued)

TYPICAL PROPERTIES:

CITGO CITGARD SYNDURANCE PLUS SYNTHETIC HEAVY DUTY ENGINE OILS

5W-30 5W-40
Material Code 622676001 622677001
Gravity, ASTM D 4052, API 33.6 33.8
Pounds Per Gallon 7.14 7.14
Flash Point, COC, ASTM D 92, F (C) 428 (220) 453 (234)
Viscosity, ASTM D 445, cSt at 40C 70 88
cSt at 100C 11.3 14
Viscosity Index, ASTM D 2270 156 163
CCS Vis, ASTM D 5293, cP at C 6,400@ -30 C 6,350 at -30C
MRV Vis, ASTM D 4684, cP at C 21,970 at -35C 30,060 at -35C
MRV Yield Stress, ASTM D 4684, Pa at C <35 <35
Pour Point, ASTM D 97, F (C) -38F (-39C) -44F (-42C)
TBN (Total Base No.), ASTM D 2896 11 11
Color, ASTM D 1500 L5.5 L5.5
NOACK Volatility, ASTM 05800, % Loss 11.5 11.9

Fuel Savings Advantage


Low Temperature Pumpability Comparison
CITGARD
How much wear occurs waiting on 15W-40? SynDurance
Savings Conventional PLUS
Category 15W-40 5W-30 Savings*

Number
of Units 100 100

Annual
Miles/Unit 100,000 100,000

MPG 6.50 6.68

Fuel Savings
% Increase None 3.00

Fuel Cost 2.00 2.00

Annual Unit
Fuel Gallons 15,384 14,970 414
SynDurancePlus Conventional SynDurancePlus Conventional
5W-40 SAE 15W-40 5W-40 SAE 15W-40 Annual Unit
Fuel Cost $30,768 $29,940 $828
3 seconds 7 seconds
Fleet Anual
Cold box testing at -22F (-30C) of used oil demonstrates the Fuel Gallons 1,538,400 1,497,000 41,400
superior flow characteristics of SynDurance Plus Synthetic 5W-40 Total Savings
Including
Cost of Oil $82,800

______ *Savings is example onlyIndividual fleet result will vary

CITGO, CITGARD and SynDurance are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks
or trademarks are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to
change without notice.

C I T G O P e t r o l e u m C o r p o r a t i o n 8 0 0 / 2 4 8 - 4 6 8 4 H o u s t o n , Te x a s M a n u f a c t u r e d i n U S A
C10234
C10234

Click Here for Return to


PI Sheet Table of Contents
23
P R O D U C T I N F O R M A T I O N
HDEO Engine Oils

C I T G O C I T G A R D
C N G / L N G E N G I N E O I L
Date 01/17

DESCRIPTION: CITGO CITGARD CNG/LNG Engine Oil is a specially formulated synthetic blend for compressed
natural gas (CNG) engines in transit operation. It is available as a SAE 15W-40 viscosity grade.
Building on CITGOs long heritage of outstanding gas engine oils for stationary applications, CITGO
CITGARD CNG/LNG Engine Oil provides the protection needed in todays demanding mobile CNG
applications.
QUALITIES:
CITGO CITGARD CNG/LNG Engine Oil is formulated with base stocks specially selected for
compressed natural gas operation, proven additives and a shear stable VI improver. This unique
combination provides protection against deposits in the higher temperature natural gas combustion
chamber. Liner and tappet wear protection far exceed original equipment manufacturers
requirements. CITGOs combination of components provides excellent cold pumpability, foam
protection, exceptional oxidation and nitration control, overall engine cleanliness, and reduced oil
consumption.
BENEFITS
Extensively field tested under severe mobile operating conditions
Meets major mobile-on highway gas engine requirements
Longer engine oil service life capability in a variety of mobile engine applications. Always follow OEM
recommendations when extending oil drain intervals
Excellent TBN and TAN retention
Resists viscosity breakdown and maintains excellent oil films under high engine loads over engine oil
service intervals
Reserve protection against oxidation and nitration resulting from higher CNG LNG operating
temperatures

APPLICATIONS:
CITGO CITGARD CNG/LNG Engine Oil is conforming to Cummins CES 20085 and to Detroit Diesel
Corporation (DDC) Power Guard Oil specification 93K216, and is recommended for use in Series
60G, 50G and 30G natural gas engines. Mack Trucks and John Deere also call for this quality
of oil in their natural gas fueled engines. CITGO CITGARD CNG/LNG Engine Oil is also suitable
for use with other gaseous fuels such as LPG. Always consult your owners manual for correct oil
recommendations.

(Continued)

(Continued)

C II TT G
C GOO P
P ee tt rr oo ll ee uu m
m C
C oo rr pp oo rr aa tt ii oo nn 88 00 00 // 22 44 88 -- 44 66 88 44 H
H oo uu ss tt oo nn ,, T
Te x a s M a n u f a c t u r e d i n U S A
C10128
C10128

Click Here for Return to


PI Sheet Table of Contents
24
P R O D U C T I N F O R M A T I O N

HDEO Engine Oils


C I T G O C I T G A R D
C N G / L N G E N G I N E O I L
D(Continued)
ate 01/17 - (Continued)

APPLICATIONS: TYPICAL PROPERTIES:


(Contd.)
CITGO CITGARD CNG/LNG ENGINE OIL

SAE Grade 15W-40

Material Code 632020001

Gravity, ASTM D 4052, API 29.7


Pounds Per Gallon 7.31
Flash Point, ASTM D 92, F (C) 437 (225)
Viscosity ASTM D 445, cSt at 40C 128
cSt at 100C 15.9
Viscosity Index, ASTM D 2270 131
Pour Point, ASTM D 97, F (C) -33 (-36)
Sulfated Ash, ASTM D 872, % 0.91
Total Base Number, ASTM D 2896 6.9
______
CITGO and CITGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to
change without notice.

C I T G O P e t r o l e u m C o r p o r a t i o n 8 0 0 / 2 4 8 - 4 6 8 4 H o u s t o n , T ee xx aa ss M
M aa nn uu ff aa cc tt uu rr ee dd ii nn U
U SS AA
C 10128
C10128

Click Here for Return to


PI Sheet Table of Contents
25
P R O D U C T I N F O R M A T I O N
Small Engine Oils

C I T G O M U L T I - P U R P O S E A I R - C O O L E D
2 - C Y C L E E N G I N E O I L
Date 07/15

DESCRIPTION: CITGO Multi-Purpose Air-Cooled 2-Cycle Engine Oil is designed for use in air-cooled
two-stroke engines.

QUALITIES: CITGO Multi-Purpose Air-Cooled 2-Cycle Engine Oil is engineered for lower smoke and protection
against exhaust port blocking, combustion chamber and piston deposits, ring sticking and scuffing,
and wear in todays high RPM air-cooled 2-cycle engines.

APPLICATIONS: CITGO Multi-Purpose Air-Cooled 2-Cycle Engine Oil can be used in motorcycles, generators,
lawnmowers, and hand held power equipment such as leaf blowers, trimmers, and chainsaws
operating in hot, dirty, dusty environments and high loads for extended periods. Do not use in
engines requiring an NMMA TC-W3 product. Consult owners manual for Fluid Specification.

TYPICAL PROPERTIES:

CITGO MULTI-PURPOSE AIR-COOLED 2-CYCLE ENGINE OIL

Material Code 621610001

Gravity, ASTM D 4052, API 31.5


Density, lb/gal, at 60F 7.23
Flash Point, PMCC, ASTM D 93, F (C) 201 (94)
COC, ASTM D 92, F (C) 221 (105)
Viscosity, ASTM D 445, cSt at 40C 61
cSt at 100C 8.6
ASTM D 2161, SUS at 100F 295
SUS at 210F 55
Viscosity Index, ASTM D 2270 125
Pour Point, ASTM D 97, F (C) -42 (-36)
Appearance, Color Purple
Sulfated Ash, ASTM D 874, % 0.11
Total Base Number, ASTM D 2896, mg KOH/g 1.6

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, sTt oe nx ,a sT e x M
a sa n u M
f aacdt u
ere
i nd Ui nS AU S A
C10228C 1 0 2 2 8

Click Here for Return to


PI Sheet Table of Contents
26
P R O D U C T I N F O R M A T I O N

Small Engine Oils


C I T G O S U P E R G A R D A I R - C O O L E D
2 - C Y C L E E N G I N E O I L
Date 07/15

DESCRIPTION: CITGO SUPERGARD Air-Cooled 2-Cycle Engine Oil is a premium performance synthetic blend
lubricant designed for use in high performance air-cooled two-stroke engines.

QUALITIES: SUPERGARD Air-Cooled 2-Cycle Engine Oil is engineered for lower smoke and advanced
protection for air-cooled 2-cycle engines. This synthetic blend formula meets or exceeds the rigorous
requirements of the API TC, JASO FD and ISO-L-EGD classifications for 2-cycle air-cooled engine
oils and also exceeds the performance requirements for JASO FC, FB; ISO-L-EGC and -EGB. This
advanced oil helps to protects todays high RPM air-cooled 2-cycle engines against exhaust port
blocking, combustion chamber and piston deposits, ring sticking and scuffing, and wear. The JASO
FD Certification number for this lubricant is 001 CGO 545.
SUPERGARD Air-Cooled 2-Cycle Engine Oil is formulated with premium base oils and a low ash
additive package that provides excellent lubricity and detergency performance which surpasses the
standard for preventing piston and combustion chamber deposits. In addition, SUPERGARD
Air-Cooled 2-Cycle Engine Oil is a synthetic blend which reduces exhaust smoke and prevents piston
seizure and cylinder scuffing. SUPERGARD Air-Cooled 2-Cycle Engine Oil mixes readily with fuel for
pre-mix type, even at low temperatures. Consult owners manual for Fluid Specification.

APPLICATIONS: CITGO SUPERGARD Air-Cooled 2-Cycle Engine Oil is recommended for use in air-cooled, 2-cycle
applications where an API TC, JASO FD or ISO-L-EGD product is preferred. This oil supercedes
previous JASO and ISO specifications. It can be used in either premix or oil injection systems up to
50:1 fuel to oil ratios. Do not use in engines requiring an NMMA TC-W3 product.
SUPERGARD Air-Cooled 2-Cycle Engine Oil can be used in motorcycles, generators, lawnmowers,
and hand held power equipment such as leaf blowers, trimmers, and chainsaws operating in hot,
dirty, dusty environments and high loads for extended periods. SUPERGARD Air-Cooled 2-Cycle
Engine Oil provides the necessary protection to keep your air-cooled 2-stroke cycle engine running
cleaner, longer and with less smoke.

TYPICAL PROPERTIES:

CITGO SUPERGARD AIR-COOLED 2-CYCLE ENGINE OIL

Material Code 621611001

Gravity, ASTM D 4052, API 32.0


Density, lb/gal, at 60F 7.21
Flash Point, PMCC, ASTM D 93, F (C) 185 (85)
Flash Point, COC, ASTM D 92, F (C) 203 (95)
Viscosity, ASTM D 445, cSt at 40C 55
cSt at 100C 8.5
ASTM D 2161, SUS at 100F 281
SUS at 210F 54.8
Viscosity Index, ASTM D 2270 129
Pour Point, ASTM D 97, F (C) -49 (-45)
Appearance, Color Purple
Sulfated Ash, ASTM D 874, % 0.1
Total Base Number, ASTM D 2896, mg KOH/g 2.2

CITGO and SUPERGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGO PG
CIT e tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10009C 1 0 0 0 9

Click Here for Return to


PI Sheet Table of Contents
27
P R O D U C T I N F O R M A T I O N
Small Engine Oils

C I T G O S U P E R G A R D M A R I N E P L U S
2 - C Y C L E E N G I N E O I L
Date 09/15

DESCRIPTION: CITGO SUPERGARD Marine Plus 2-Cycle Engine Oil is a licensed NMMA TC-W3 oil that effectively
combats wear, scuffing, deposit build-up, and enhances lubricity to provide longer
engine life.

BENEFITS: Reduces carbon and deposit build-up on engine parts


Helps prevent piston ring sticking
High film strength for improved lubricity which provides:
Increased engine efficiency
Excellent scuffing protection of rings and cylinder and reduced bearing wear
Cleaner, better-running engines producing less smoke
Guaranteed to protect OEM engine warranties

APPLICATIONS: CITGO SUPERGARD Marine Plus 2-Cycle Engine Oil is recommended for all water-cooled or liquid-
cooled 2-cycle engines requiring an NMMA TC-W3, TC-WII or TC-W type oil. It may also be used in
many air-cooled 2-cycle engine applications requiring API Service Category TC. Recommended for
both direct injected and pre-mix systems.
CITGO SUPERGARD Marine Plus 2-Cycle Engine Oil will provide protection for gasoline fueled
2-cycle engines when used at the primary dilution recommended by the original equipment
manufacturer.
Consult owners manual for Fluid Specification.
TYPICAL PROPERTIES:

CITGO SUPERGARD MARINE PLUS 2-CYCLE ENGINE OIL

Material Code 621602001

Gravity, ASTM D 4052, API 31.5


Density, lb/gal at 60F 7.23
Flash Point, PMCC, ASTM D 93, F (C) 178 (81)(1)
Flash Point, COC, ASTM D 92, F (C) 197 (92)
Viscosity, ASTM D 445, cSt at 40C 32.0
cSt at 100C 5.9
ASTM D 2161, SUS at 100F 163
SUS at 210F 46
Viscosity Index, ASTM D 2270 130
Pour Point, ASTM D 97, F (C) -38 (-39)
Appearance, Color Blue/Green
Sulfated Ash, ASTM D 874, % <0.004
Total Base Number, ASTM D 2896, mgKOH/g 8.6

NOTE
(1) Combustible liquid

CITGO and SUPERGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CCIITTG
GOO PPeettrroolleeuum
m CCoorrppoorraattiioonn 880000//224488--44668844 HHoouussttoonn,, TT e x a s M a n u f a c t u r e d i n U S A
C10007
C10007

Click Here for Return to


PI Sheet Table of Contents
28
P R O D U C T I N F O R M A T I O N

Small Engine Oils


C I T G O S U P E R G A R D S E A & S N O W

2 - C Y C L E E N G I N E O I L
Date 07/15

DESCRIPTION: CITGO SUPERGARD Sea & Snow 2-Cycle Engine Oil is a synthetic blend, low smoke oil designed
for use in high performance air- or liquid-cooled two-stroke engines of Personal Water Craft (PWC)
and Snowmobiles.

QUALITIES: SUPERGARD Sea & Snow 2-Cycle Engine Oil is engineered for lower smoke and advanced
protection for air-cooled 2-cycle engines. The synthetic blend formula meets or exceeds the rigorous
requirements of the API TC, JASO FD and ISO-L-EGD classifications for 2-cycle air-cooled engine
oils. This advanced oil helps protect todays high performance air-cooled 2-cycle engines against
exhaust port blocking, combustion chamber and piston deposits, ring sticking and scuffing, and wear.
The JASO FD Certification number for this lubricant is 001 CGO 555.
SUPERGARD Sea & Snow is formulated with premium base oils and a new synthetic low ash additive
package that provides excellent lubricity and detergency performance that surpasses standards for
preventing piston and combustion chamber deposits. In addition, SUPERGARD Sea & Snow is a
synthetic blend which reduces exhaust smoke and prevents piston seizure and cylinder scuffing.
SUPERGARD Sea & Snow mixes readily with fuel for pre-mix type, even at low temperatures.
APPLICATIONS: CITGO SUPERGARD Sea & Snow 2-Cycle Engine Oil is recommended for use in air-cooled,
2-cycle applications where an API TC, JASO FD or ISO-L-EGD product is preferred. This oil
supercedes previous JASO and ISO specifications. It can be used in either premix or oil injection
systems up to 50:1 fuel ratios. It may also be used in certain motorcycle engines which are liquid
cooled. Do not use in engines requiring an NMMA TC-W3, TC-WII, or TC-W product.
SUPERGARD Sea & Snow is formulated primarily for use in snowmobiles and personal watercraft. It
can be used in motorcycles, generators, lawnmowers, and hand held power equipment such as leaf
blowers, trimmers, and chainsaws. SUPERGARD Sea & Snow provides the necessary protection to
keep your snowmobile or PWC running cleaner, longer, and with less smoke. Consult owners manual
for Fluid Specification.

TYPICAL PROPERTIES:

CITGO SUPERGARD SEA & SNOW 2-CYCLE ENGINE OIL

Material Code 621612001

Gravity, ASTM D 4052, API 32.0


Density, lb/gal at 60F 7.21
Flash Point, PMCC, ASTM D 93, F (C) 185 (85)
COC, ASTM D 92, F (C) 203 (95)
Viscosity, ASTM D 445, cSt at 40C 55
cSt at 100C 8.5
ASTM D 2161, SUS at 100F 281
SUS at 210F 54.8
Viscosity Index, ASTM D 2270 129
Pour Point, ASTM D 97, F (C) -49 (-45)
Appearance, Color Purple
Sulfated Ash, ASTM D 874, % 0.0
Total Base Number, ASTM D 2896, mg KOH/g 2.2

CITGO, SUPERGARD and Sea & Snow are registered trademarks of CITGO Petroleum Corporation. All other registered
trademarks or trademarks are the property of their respective owners.

CITGC OI T
PG e tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10008C 1 0 0 0 8

Click Here for Return to


PI Sheet Table of Contents
29
P R O D U C T I N F O R M A T I O N

C I T G O C I T G E A R
S T A N D A R D X D
Date 07/15

DESCRIPTION: CITGO CITGEAR Standard XD is a multipurpose API GL-4 gear lubricant which uses a sulfur-
phosphorus additive system. The additives impart some extreme pressure properties but to a lesser
degree than CITGO Premium Gear Oils (MP). The additives also impart antiweld, antiscuff and
antiwear properties.
API Service Category GL-4.
Automotive Gear Oils

QUALITIES: CITGO CITGEAR Standard XD is formulated with naturally high VI refined base stocks and a very
shear stable VI improver. It will maintain viscometric properties throughout its useful life and will not
experience rapid viscosity loss through shear.
CITGO CITGEAR Standard XD is available in viscosity grade SAE 75W-90. It is acceptable for use at
ambient temperatures down to -20F.

APPLICATIONS: CITGO CITGEAR Standard XD may be used where the equipment manufacturer recommends
a GL-4 product.
CITGO CITGEAR Standard XD is recommended for manual transmissions, differentials, final drives
and other gearcases of trucks, buses, cars, farm tractors and earth moving equipment where oils of
GL-4 performance level are required.
CITGO Premium Gear Oils (MP) should be used if API GL-5 performance level is recommended.

TYPICAL PROPERTIES:

CITGO CITGEAR STANDARD XD

SAE Grade 75W-90

Material Code 631507001

Gravity, ASTM D 4052, API 28.9


Density, lb/gal at 60F 7.3
Color, ASTM D 1500 L1.5
Flash Point, ASTM D 92, F (C) 399 (204)
Viscosity, ASTM D 445, cSt at 40C 86
cSt at 100C 15.1
ASTM D 2161, SUS at 100F 435
ASTM D 2161, SUS at 210F 80
Viscosity Index, ASTM D 2270 185
Brookfield Viscosity, ASTM D 2983, Max., cP at -26C 115,000
Pour Point, ASTM D 97, F (C) -49 (-45)
Foam Test, ASTM D 892 Pass
Copper Corrosion, ASTM D 130, 3 hrs at 250F 1B

CITGO and CITGEAR are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.

CITGO
C IP
TeGtO
r oP
l eeut m
r o lCe ou rmp oCr o
a rt ipoonr a t i8o0n0 / 2 84 08 0- 4
/ 264884- 4 6H8 o4 u s tHo on u, sTt e
o xn a, sT e xM
aas nu fMa ac dt ue r ei nd U
i nS A
USA
C10010C 1 0 0 1 0

Click Here for Return to


PI Sheet Table of Contents
30
P R O D U C T I N F O R M A T I O N

C I T G O C I T G E A R H D S Y N T H E T I C
G E A R L U B R I C A N T S
Date 08/15

DESCRIPTION: CITGO CITGEAR HD Synthetic Gear Lubricants are state-of-the-art heavy duty, synthetic gear and
bearing lubricants designed for use in manual transmission, transfer cases and differentials of passenger
cars, trucks, farm tractors, construction equipment and over-the-road trucks. CITGO CITGEAR HD
Synthetic Gear Lubricants are formulated using a proprietary combination of synthetic base stocks and
additives. This unique combination of components offers the maximum protection for gears and bearings

Automotive Gear Oils


over a wide range of operating temperatures.

QUALITIES: Superior oxidation resistance for extended drain intervals.


Excellent load carrying properties (SAE 75W-90, 75W-140 and 80W-140) for maximum protection.
High viscosity index and low pour point synthetic base stocks provide reduced friction resulting in fuel
economy potential during low temperature startups or operation conditions.
Excellent demulsibility
Shear resistant
Hydrolytically stable
Non-foaming

APPLICATIONS: CITGO CITGEAR HD Synthetic Gear Lubricants (SAE 75W-90, 75W-140 and 80W-140) are
recommended for differentials (including limited slip units), manual transmission for which hypoid-
type lubricants are required and transfer cases for heavy equipment found in trucks, tractors,
industrial gear drives, automobiles and farm machinery. These products meet or exceed the following
performance requirements:
API Service Classification GL-5 and MT-1
CITGO CITGEAR HD Synthetic Gear Lubricant SAE 50 is recommended for heavy-duty service in
manual transmissions for which the manufacturer normally recommends either engine oils or GL-1
to GL-4 lubricants. This product contains antiwear, rust, oxidation, foam and corrosion inhibitors to
protect bearings and synchronizers and to promote longer transmission life. As in the other products in
this series, CITGO CITGEAR HD Synthetic Gear Lubricant SAE 50 provides improved start-up, easier
shifting and less gear wear in low temperature environments. Less friction, less drag and improved
oxidation resistance combine to provide fuel economy benefits and longer drain intervals.

(Continued)

(Continued)

CIT
CITGO PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10147C 1 0 1 4 7

Click Here for Return to


PI Sheet Table of Contents
31
P R O D U C T I N F O R M A T I O N

C I T G O C I T G E A R H D S Y N T H E T I C
G E A R L U B R I C A N T S
D ate 08/15 - (Continued)
(Continued)

APPLICATIONS: This product is recommended in applications calling for the following specifications:
API GL-4, MT-1

TYPICAL PROPERTIES:
Automotive Gear Oils

CITGO CITGEAR HD SYNTHETIC GEAR LUBRICANTS

SAE Grade 75W-90 75W-140 80W-140 50

Material Code 632496001 632497001 632498001 632495001

Specific Gravity 0.865 0.869 0.877 0.857


Density, lb/gal 7.20 7.23 7.30 7.14
Viscosity, ASTM D 445, cSt at 40C 126 185 289 168
Viscosity, ASTM D 445, cSt at 100C 16.7 25.8 29.4 20.1
Viscosity Index, ASTM D 2270 144 171 138 139
Brookfield Viscosity, ASTM D 2983,
cP at -26C 72,300 28,800
cP at -40C 114,500 137,500
Pour Point, ASTM D 97, F (C) -65 (-54) -60 (-51) -49 (-45) -60 (-51)
Flash Point, ASTM D 92, F (C) 378 (192) 370 (188) 381 (194) 507 (264)
Foam Test, ASTM D 892 Pass Pass Pass Pass
Copper Corrosion, ASTM D 130 1A 1A 1A 1A
FZG, Failure Stage >12 >12 >12 NA

NA = Not Applicable

CITGO and CITGEAR are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.

CIP
CITGO TGe tOr o P
l eeut m
r o lCe ou rmp oCr oa rt p
i oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHo on u, sTt oe nx ,a sT e x M
a sa nu M
f aac dt ue r e
i nd Ui nS AU S A
C10147C 1 0 1 4 7

Click Here for Return to


PI Sheet Table of Contents
32
P R O D U C T I N F O R M A T I O N

C I T G O S Y N T H E T I C G E A R L U B R I C A N T S
Date 3/17

DESCRIPTION: CITGO Synthetic Gear Lubricants are heavy-duty, synthetic gear and bearing lubricants designed
for use in manual transmissions, transfer cases and differential axles of trucks, farm tractors,
construction, passenger cars and miscellaneous industrial equipment. Blended from very high
viscosity index, low pour point synthetic base stocks, these oils provide maximum protection to gears
and bearings operating over a wide range of temperatures, speeds and loads. Their superb resistance

Automotive Gear Oils


to oxidation provides the benefit of extended drain intervals. Available in three viscosity grades: SAE
75W-90, 80W-140 and 50.

PROPERTIES: Superior oxidation resistance for extended drain intervals


Excellent load carrying properties (SAE 75W-90 and 80W-140) for maximum protection against
component wear
High viscosity index and low pour point synthetic base stocks provide reduced fluid friction with
resultant fuel savings potential during low temperature start-up or operating conditions
Excellent demulsibility separates water readily
Shear resistant
Provides full protection to system parts against rust and corrosion
Non-foaming

APPLICATIONS: CITGO Synthetic Gear Lubricants (SAE 75W-90 and 80W-140) are recommended for differentials,
manual transmissions for which hypoid-type lubricants are required and transfer cases for heavy
equipment trucks, tractors, industrial gear drives, automobiles, farm machinery, etc. These products
meet or exceed the following performance requirements:
API Service Classification GL-5 and MT-1
SAE J2360; former U.S. Military Specification MIL-L-2105D and MIL-PRF-2105E
DANA SHAES 256, Rev. C, 429 (75W-90)
DANA SHAES 256, Rev. A, 429 (80W-140)
Mack GO-J Plus (75W-90)
Mack GO-J (80W-140)
ArvinMeritor O-76N (75W-90)
ArvinMeritor O-76B, O-80 (80W-140)
International TMS-6816

CITGO Synthetic Gear Lubricant SAE 50 is recommended for heavy-duty service in manual
transmission for which the manufacturer normally recommends either engine oils or GL-1 to
GL-4/MT-1 lubricants. This product contains antiwear, rust, oxidation, foam and corrosion inhibitors to
protect bearings and synchronizers and to promote longer transmission life. As in the other products
in this series, CITGO Synthetic Gear Lubricant SAE 50 provides improved start-up, easier shifting
and less gear wear in low temperature environments. Less friction, less drag and improved oxidation
resistance combine to provide fuel economy benefits and longer drain intervals.

(Continued)

C I T G O P e t r o l e u m C o r p o r a t i o n 8 0 0 / 2 4 8 - 4 6 8 4 H o u s t o n , Te x a s M a n u f a c t u r e d i n U S A
C10015
C10015

Click Here for Return to


PI Sheet Table of Contents
33
P R O D U C T I N F O R M A T I O N

C I T G O S Y N T H E T I C G E A R L U B R I C A N T S
Date 3/17 - (Continued)

APPLICATIONS: CITGO Synthetic Gear Lubricant SAE 50 (Continued)


This product meets or exceeds the following performance requirements:
MT-1
Eaton Roadranger Extended Drain (E500) PS-164 Rev. 7
Mack TO-A PLUS 500,000 Mile Extended Drain
Automotive Gear Oils

Mack mDrive/Volvo I-shift (75,000 mile)


ZF Freedom Line ZF TE-ML-04D, ZF-AS Tronic
International TMS 6816
Meritor O-81
Volvo 97305

TYPICAL PROPERTIES:

CITGO SYNTHETIC GEAR LUBRICANTS

SAE Grade 75W-90 80W-140 50


Material Code 631809001 631814001 631815001
API Classification GL-5 GL-5 GL-4
AGMA Grade 4 5-6 4
Gravity, ASTM D 4052, API 33.4 31.5 33.1
Pounds Per Gallon 7.14 7.23 7.16
Flash Point, ASTM D 92, F (C) 405 (204) 410 (210) 435 (224)
Pour Point, ASTM D 97, F (C) -65 (-54) -54 (-48) -49 (-45)
Color, ASTM D 1500 1.5 1.5 2.0
Viscosity, ASTM D 445, cSt at 40C 111 273 128
Viscosity, ASTM D 445, cSt at 100C 15.1 29.1 17.6
Viscosity Index 143 142 151
Brookfield Viscosity, ASTM D 2270
cP at -18C 5,715 22,700 6,835
cP at -26C 60,950
cP at -40C 93,050 <120,000
Foam Test, ASTM D 892 Pass Pass Pass
Copper Corrosion, ASTM D 130 1A 1A 1A
Rust Protection, ASTM D A/B Pass Pass Pass

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

CITGO Petroleum Corporation 800/248-4684 Houston, T


Teexxaass M
M aa nn uu ff aa cc tt uu rr ee dd ii nn U
U SS AA
C10015
C 10015

Click Here for Return to


PI Sheet Table of Contents
34
P R O D U C T I N F O R M A T I O N

P R E M I U M ( L S ) G e a r O i l
Date 07/15

DESCRIPTION: CITGO Premium (LS) Gear Oil is a multipurpose, limited slip automotive gear lubricant. Selected
additives impart extreme pressure properties which protect automotive gears operated under the
most severe service conditions encountered in passenger cars, trucks, farm tractors, earthmoving,
construction and other heavy-duty equipment. These additives impart the antiweld, antiscuff and
antiwear properties which are necessary in heavy-duty applications. The friction modifier meets the

Automotive Gear Oils


requirements of positive traction or limited slip type differentials.

QUALITIES: CITGO Premium (LS) Gear Oil is blended to meet the multigrade viscosity requirements described in
SAE Standard J306. This gear lubricant is formulated with high VI, refined base oils and thus does not
require viscosity improver to meet multigrade viscometric properties. Because this lubricant does not
contain VI improver, it will maintain its viscometric properties throughout its useful life and will not lose
viscosity through shear.
Equipment manufacturers recommendations should be followed when the gear lubricant is subject to
high ambient temperatures. While some gearsets are designed for year-round operation using an SAE
80W-90, others may require SAE 85W-140 for high ambient temperature operations.
CITGO Premium (LS) Gear Oil is designated for the highest severity of gear service, API
Service Classification GL-5. CITGO Premium (LS) Gear Oil is on Mack Trucks list of approved
GO-H lubricants.

APPLICATIONS: CITGO Premium (LS) Gear Oil is recommended for use where multipurpose gear oil or one suitable
for API Service GL-5 is required.
Premium (LS) is for use in differentials of passenger cars and light trucks. Premium (LS) is also for
use in limited slip differentials known as Sure-grip, Posi-trac, Trac-lock, etc., for complete fill or for
top-off.
Premium (LS) is also for service in transmissions, differentials, final drives and other gearcases
of trucks, buses and farm tractors where extreme pressure, hypoid or multipurpose gear oils are
specified by the equipment manufacturer, including differentials.

(Continued)
(Continued)

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10013C 1 0 0 1 3

Click Here for Return to


PI Sheet Table of Contents
35
P R O D U C T I N F O R M A T I O N

P R E M I U M ( L S ) G e a r O i l
(Continued)
D ate 07/15 - (Continued)

TYPICAL PROPERTIES:

CITGO PREMIUM (LS) GEAR OIL

SAE Grade 80W-90


Automotive Gear Oils

Material Code 631330001

SAE Grade 80W-90


Gravity, ASTM D 4052, API 27.4
Specific Gravity 0.89
Density, lb/gal at 60F 7.4
Flash Point, COC, ASTM D 92, F (C) 430 (221)
Viscosity, ASTM D 445, cSt at 40C 142
cSt at 100C 14.2
ASTM D 2161, SUS at 100F 721
SUS at 210F 76
ASTM D 2983, cP at -26C 125,000
Viscosity Index, ASTM D 2270 97
Pour Point, ASTM D 97(1), F (C) -27 (-33)
Channel Point, F (C), Max. -31 (-35)
Foam Test, ASTM D 892 Pass

Notes: (1) Method 3456 of Federal Test Method Standard No. 791

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10013C 1 0 0 1 3

Click Here for Return to


PI Sheet Table of Contents
36
P R O D U C T I N F O R M A T I O N

C I T G O P R E M I U M G E A R O I L S ( M P )
Date 3/17

DESCRIPTION: CITGO Premium Gear Oils (MP) are multipurpose gear lubricants whose high performance level
is obtained by using a sulfur-phosphorus additive system. The selected additives impart extreme
pressure properties to protect automotive gears which may be operated under the most severe
service conditions encountered in passenger cars, trucks, farm tractors, earth moving, construction
and other heavy-duty equipment. These additives specifically impart antiweld, antiscuff and antiwear

Automotive Gear Oils


properties necessary in heavy-duty service gear lubricants.
API Service Classification: GL-5 and MT-1

QUALITIES: CITGO Premium Gear Oils (MP) are blended to meet the multigrade viscosity requirements described
in SAE J306 viscosity recommended practice. These gear lubricants are formulated with naturally
high VI, highly refined base oils and do not require viscosity index improvers to meet multigrade
viscometric properties. These lubricants maintain their viscometric properties throughout their useful
life and will not lose viscosity through shear.
Viscosity Grades Available:
SAE 80W-90 grade for use at ambient temperatures down to -15F.
SAE 85W-140 grade for use at ambient temperatures down to +10F.
Equipment manufacturers recommendations should be followed when the gear lubricant is subject
to high ambient temperatures. While some gear sets are designed for year-round
operation using an SAE 80W-90, others may require SAE 85W-140 for high
ambient temperature operations during the hot weather months.
CITGO Premium Gear Oils (MP) are designated for API Service Classification GL-5 and MT-1.

APPLICATIONS: CITGO Premium Gear Oils (MP) are recommended for the following applications:
Where a multipurpose gear oil or one meeting the requirements of SAE J2360, API Service GL-5
and/or MT-1 is required.
In transmissions, differentials, final drives and other gear cases of trucks, buses and farm equipment
where extreme pressure (EP), hypoid or multipurpose gear oils are specified by
the manufacturer.

(Continued)

(Continued)

CCI ITTGGOO PPeet tr rool leeuumm CCoor rppoor raat ti ioonn 880000/ /224488- -44668844 HHoouusst toonn, , TTeexxaass M
Maannuuffaaccttuurreedd i inn UUSSAA
C10012
C10012

Click Here for Return to


PI Sheet Table of Contents
37
P R O D U C T I N F O R M A T I O N

C I T G O P R E M I U M G E A R O I L S ( M P )
D(Continued)
ate 3/17 - (Continued)

TYPICAL PROPERTIES:

CITGO PREMIUM GEAR OILS (MP)

SAE Grade 80W-90 85W-140


Automotive Gear Oils

Material Code 631310001 631320001

Gravity, ASTM D 4052, API 27 26


Density, lb/gal at 60F 7.4 7.5
Flash Point, ASTM D 92, F (C) 448 (231) 478 (248)
Viscosity, ASTM D 445, cSt at 40C 139 365
Viscosity, ASTM D 602, cSt at 100C 14.7 26.9
Viscosity, ASTM D 2161, SUS at 100F 788 2010
Viscosity, ASTM D 2161, SUS at 210F 78.4 133
Brookfield Viscosity, ASTM D 2983
cP at -26.1C 120,000
cP at -12C 65,000
Viscosity Index, ASTM D 2270 99 97
Pour Point, ASTM D 97, F (C) -27 (-33) 0 (-18)
Channel Point, F (C), Max. -31 (-35) -4 (-20)
Foam Test, ASTM D 892 Pass Pass
Copper Corrosion, ASTM D 130 Pass Pass

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

CCIITTG
GOO PPeettrrool leeuum
m CCoorrppoorraatti ioonn 880000//224488--44668844 HHoouussttoonn,, TTeexxaass MMaannuuf faacct tuur reedd i inn UUSSAA
CC10012
10012

Click Here for Return to


PI Sheet Table of Contents
38
P R O D U C T I N F O R M A T I O N

C I T G O R E G U L A R G E A R O I L
Date 07/15

DESCRIPTION: This lubricant is designed for some manually operated transmissions and spiral-bevel axles operating
under mild conditions. CITGO Regular Gear Oil is made from high quality mineral oil and selected
inhibitors. Available in SAE 90 grade.
API Service Classification GL-1.*

Automotive Gear Oils


QUALITIES: CITGO Regular Gear Oil utilizes high quality, refined base oils. Additives are incorporated to provide
oxidation, corrosion and foam inhibition not normally achieved with straight mineral oil. Friction
modifiers and extreme pressure agents are not employed in GL-1 oils.

APPLICATIONS: CITGO Regular Gear Oil is recommended for use in certain transmissions, final drives and
miscellaneous applications in bearing and gear lubrication of mobile equipment where GL-1 or straight
mineral oil is specified by the manufacturer.

*CITGO Premium Gear Oil (MP) is recommended for hypoid axles and other automotive applications
requiring an extreme pressure lubricant for GL-5 service.

TYPICAL PROPERTIES:

CITGO REGULAR GEAR OIL

SAE Grade 90

Material Code 631502001


Gravity, ASTM D 4052, API 27.5
Density, lb/gal at 60F 7.41
Flash Point, COC, ASTM D 92, F (C) 420 (215)
Viscosity, ASTM D 445, cSt at 40C, 200
Viscosity, cSt at 100C 17
ASTM D 2161, SUS at 100F 1050
Viscosity, SUS at 210F 91
Viscosity Index, ASTM D 2270 95
Pour Point, ASTM D 97, F (C) 0 (-18)

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10011C 1 0 0 1 1

Click Here for Return to


PI Sheet Table of Contents
39
P R O D U C T I N F O R M A T I O N

C I T G O S U P E R G A R D M A R I N E P L U S
L O W E R U N I T G E A R L U B R I C A N T
Date 07/15

DESCRIPTION: CITGO SUPERGARD Marine Plus Lower Unit Gear Lubricant is formulated specifically for the
marine industry. It contains the latest generation of proprietary EP additives, designed to provide
maximum protection against wear, rust, corrosion and deposits. It is also guaranteed to protect
OEM lower unit warranties.
Automotive Gear Oils

QUALITIES: This improved gear lubricant, specifically designed for boating applications, offers unmatched
protection, surpassing other marine gear lubricants using GL-4 and GL-5 80W-90 technology:
Superior EP lubrication and corrosion protection in the presence of moisture (fresh and sea water).
Improved gear protection for shock load conditions encountered with harsh startup engagement,
power reversal, and propeller entanglement.

APPLICATIONS: Recommended for use in all outboard and stern drive gear units specifying SAE 90, 80W-90 or
85W-90, including OMC Type C. Includes MerCruiser, OMC Cobra, Volvo stern drives and
Mercury, Evinrude, Johnson, Mariner, Yamaha, Suzuki, and Force outboards. Consult owners
manual for Fluid Specifications.

TYPICAL PROPERTIES:

CITGO SUPERGARD MARINE PLUS LOWER UNIT GEAR LUBRICANT

SAE Grade 85W-90

Material Code 631515001

Gravity, ASTM D 4052, API 26.3


Density, lb/gal at 60F 7.5
Flash Point, ASTM D 92, COC, F (C) 420 (216)
Viscosity, cSt at 100C 16.0
Brookfield Viscosity, -23C, cP 102,000
Pour Point, ASTM D 97, F (C) -15 (-26)
Channel Point, F (C), Max -31 (-35)
Color, Visual Blue
Foam Test, ASTM D 892 Pass
Copper Corrosion, 3 hrs at 250F Pass

CITGO and SUPERGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGO
CIP
TGe tOr o P
l eeut m
r o lCe ou rmp oCr oa rt p
i oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHo on u, sTt oe nx ,a sT e x M
a sa nu M
f aac dt ue r e
i nd Ui nS AU S A
C10183C 1 0 1 8 3

Click Here for Return to


PI Sheet Table of Contents
40
P R O D U C T I N F O R M A T I O N

C I T G O F I N A L D R I V E O I L
Date 07/15

DESCRIPTION: CITGO Final Drive Oil is a new generation lubricant that meets the Caterpillar FD-1 specification and
is designed for heavy-duty construction equipment final drives and axles operating under severe loads
and temperatures. Compared to TO-4 lubricants, CITGO Final Drive Oil will deliver greater protection
against gear and bearing fatigue resulting from the higher loads and operating conditions frequently
encountered in track type equipment and large off road haul truck final drives. CITGO Final Drive
Oil is compatible with TO-4 lubricants in the event of lubricant mixing with the understanding the
product mixing does result in decreased level of performance. CITGO Final Drive Oil should not be
used in diesel engines and should not be used in compartments that contain friction materials unless
recommended by the equipment manufacturer.
Available Viscosity Grades: SAE 60.

QUALITIES: CITGO Final Drive Oil is designed with the following qualities:
Performance engineered formula meeting Caterpillar FD-1 specification and has passed the Cat
FD-1 test requirements
Superior protection against rust, corrosion and lubricant foaming
Minimizes lubricant oxidation resulting from higher operating temperatures and loads

Transmission/Power Fluids
Protects against gear and bearing fatigue resulting from operating temperatures and loads

APPLICATIONS: Formulated to meet the performance requirements of:


Caterpillar FD-1 SAE 60 grade
Caterpillar Final Drives and Axles where recommended by Caterpillar
Up to two times the lubricant service life compared to TO-4 type lubricants. (Refer to chart below for
Performance Criteria.)
Superior wear protection in highly loaded bearings and gears optimizes component life
CITGO LubeAlert HD Oil Analysis is included to provide optimum lubricant service and component
life and reduce overall maintenance costs.
Longer component life cycles results in improved equipment productivity and reduced equipment
rebuild costs and downtime
Improved overall profitability especially in high production construction, mining and aggregate
operations

PERFORMANCE CRITERIA TO-4 60 CITGO FINAL DRIVE OIL


Lubricant Service Life 2000 Hours 4000 Hours*
Cat FD-1 Approval No Yes
Passing FD-1 Testing No Yes
LubeAlert HD Oil Analysis Availability Varies Yes
Optimum Gear & Bearing Life No Yes
* Lubricant Service Life is dependent on the following:
Operating conditions, vehicle condition and maintenance practices.
Inspect fluid levels regularly and add as needed with CITGO Final Drive Oil
Use CITGO LubeAlert HD Oil Analysis program to support maximum component life

(Continued)

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10196C 1 0 1 9 6

Click Here for Return to


PI Sheet Table of Contents
41
P R O D U C T I N F O R M A T I O N

C I T G O F I N A L D R I V E O I L
(Continued)
D ate 07/15 - (Continued)

TYPICAL PROPERTIES:

CITGO FINAL DRIVE OIL

SAE Grade 60
Material Code 633329001
Gravity, ASTM D 4052, API 27.7
Density, Pounds Per Gallon 7.40
Flash Point, COC, ASTM D 92, F (C) 265 (129)
Viscosity, ASTM D 445, cSt at 40C 334
Viscosity, ASTM D 445, cSt at 100C 25.7
Viscosity Index, ASTM D 2270 100
Pour Point, ASTM D 97, F (C) -47 (-44)
Color, ASTM D 1500 L4.0
Total Base Number, mgKOH/g D664 3.3
Foam Test, Seq. I, Tendency, mL D892 5-0
Transmission/Power Fluids

Foam Test, Seq. II, Tendency, mL D892 10-0


Foam Test, Seq. III, Tendency, mL D892 10-0
Appearance C&B
Moisture, Hot Plate Pass

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10196C 1 0 1 9 6

Click Here for Return to


PI Sheet Table of Contents
42
P R O D U C T I N F O R M A T I O N

C I T G O P O W E R S T E E R I N G F L U I D
W I T H S T O P L E A K
Date 04/16

DESCRIPTION: CITGO Power Steering Fluid with Stop Leak is formulated with high-quality base stocks and additives
designed to ensure smooth system operation and revitalize dried, shrunken, and hardened seals.
This product helps stop or reduce fluid loss caused by leaky seals and, when used as a preventative
maintenance fluid, helps avoid future leaks.

QUALITIES: Superior cold temperature performance


Excellent friction and wear protection
Anti-wear agents to protect pump components
Antioxidants to prevent sludge formation
Anti-foam agents to prevent pump cavitation and steering loss
Corrosion inhibitors to protect metal components
Wide range of seal compatibility

APPLICATIONS: For use where the following fluids are specified: GM 9985010, Chrysler 5931, and Ford M2C33-F.
For a complete list of equipment specs, visit www.citgolubes.com/lubes-advisor. Consult the owners

Transmission/Power Fluids
manual for proper fluid selection.

TYPICAL PROPERTIES:

CITGO CITGO POWER STEERING FLUID WITH STOP LEAK

Material Code 633313001

Gravity, ASTM D4052, API 32.9


Pounds Per Gallon 7.15
Flash Point, COC, ASTM D92, F (C) 424 (218)
Pour Point, ASTM D97, F (C) -54 (-48)
Viscosity, ASTM D445,
cSt at 40C 34.3
cSt at 100C 6.95
ASTM D2983, cP at -20C 1,020
cP at -40C 15,100
Viscosity Index, ASTM D2270 169
Color Light Amber
_______
CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

CCI ITTGGOO PPeet tr rool e


l euumm CCoor rppoor raat ti oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTe ex xa as s MMa an nu uf af ac ct ut ur e
r ed d i ni n UUSSAA
C10242C 1 0 2 4 2

Click Here for Return to


PI Sheet Table of Contents
43
P R O D U C T I N F O R M A T I O N

C I T G O Q U A T R A S Y N S Y N T H E T I C
T R A N S M I S S I O N F L U I D
Date 05/16

DESCRIPTION: CITGO QuatraSyn Synthetic Transmission Fluid is a full synthetic, multipurpose heavy duty
transmission fluid designed for use in a variety of automatic transmission applications and is
engineered for severe duty service. CITGO QuatraSyn Synthetic Transmission Fluid improves
maintenance efficiency by extending transmission life, resulting in reduced downtime and lower repair
costs. QuatraSyn full synthetic technology also has the capability of extending the fluid service life
compared to conventional transmission fluids. CITGO QuatraSyn Synthetic Transmission Fluid has a
long history of proven performance by having been field tested in buses, refuse vehicles, construction
material trucks, trailers and vehicles operating in stop and go conditions. CITGO Quatrasyn Synthetic
Transmission Fluid is recommended for use in automatic transmission applications where TES-295
fluid is specified. CITGO QuatraSyn Synthetic Transmission Fluid is not an Allison approved fluid.

QUALITIES: CITGO QuatraSyn Synthetic Transmission Fluid is engineered with a proprietary combination of
synthetic Group IV and Group V synthetic base oils and high performance additive technology. The
unique synthetic formula offers performance benefits that can extend the life of key transmission
components, compared with conventional fluids. CITGO QuatraSyn Synthetic Transmission Fluid is
built without viscosity modifiers that can shear resulting in viscosity breakdown and loss of power
transfer efficiency. CITGO QuatraSyn Synthetic Transmission Fluid provides excellent deposit control
Transmission/Power Fluids

and reduces the tendency of fluid breakdown that leads to clutch plate glazing resulting in loss of
clutch plate friction control. CITGO QuatraSyn Synthetic Transmission Fluid also provides wide
temperature range performance and year around capability.

APPLICATIONS: CITGO QuatraSyn Synthetic Transmission Fluid provides:


Extended drain and filter change intervals resulting in reduced oil disposal cost.
Outstanding low temperature performance.
Excellent thermal and oxidation stability resulting in better transmission performance through a
reduction in sludge and deposit formation.
Shear stability and viscosity retention since it contains NO viscosity modifiers.
Optimized traction coefficients which can provide increased fuel economy.
Fortified with seal conditioners to reduce the tendency for leakage after extended service.

CITGO QuatraSyn Synthetic Transmission Fluid is intended for use in the following universal
powershift and automatic transmission applications:
School Buses and Vans
Refuse Fleets
Commercial Trucks and Vehicles
Motor Homes
Emergency Vehicles
On/Off-Highway Vehicles
Inter/Intracity Buses
Light Duty Pickup Trucks and Passenger Cars
Recommended for use in automatic transmission applications where C-4 fluid is specified
ZF Ecomat transmissions
Voith DIWA Transmissions
Always consult your owners manual for proper fluid recommendations and warranty requirements.
QuatraSyn is not an Allison approved fluid.

(Continued)
(Continued)

CCIITTGGOO PPeettrrool leeuum


m CCoorrppoorraatti ioonn 880000//224488--44668844 HHoouussttoonn,, TTee xx aa ss M
M aa nn uu ff aa cc tt uu rr ee dd ii nn U
USSA
A
C10148
C10148

Click Here for Return to


PI Sheet Table of Contents
44
P R O D U C T I N F O R M A T I O N

C I T G O Q U A T R A S Y N S Y N T H E T I C
T R A N S M I S S I O N F L U I D
D(Continued)
ate 05/16 - (Continued)

TYPICAL PROPERTIES:

CITGO QUATRASYN SYNTHETIC TRANSMISSION FLUID

Material Code 632493001

Gravity, ASTM D237, API 37.1


Specific Gravity, D4052 0.839
Density, lb/gal 6.99
Color Red
Flash Point ASTM D92, F (C) 402 (206)
Viscosity ASTM D445,
cSt at 100C 7.25
cSt at 40C 36.5
Viscosity Index 171
Brookfield Viscosity ASTM D2983
cP at -40C 8,200

Transmission/Power Fluids
cP at -20C 1,025
Pour Point ASTM D97, F (C) <-87 (<-66)
Total Acid Number, ASTM D664, mg KOH/gm 1.03
4-Ball Wear, ASTM D4172 0.48
40kg, 1200 rpm, 1 hour,
Cold Cranking Simulator, ASTM D5293, cP at -30C 2260

CITGO and QuatraSyn are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

QuatraSyn Maintains Critical Viscosity Protection

QuatraSyn resists
viscosity breakdown
during use
Viscosity

Many Conventional
Automatic
Transmission Fluids

Miles or Hours

C I T G O P e t r o l e u m C o r p o r a t i o n 8 0 0 / 2 4 8 - 4 6 8 4 H o u s t o n , Te x a s M a n u f a c t u r e d i n U S A
C10148
C10148

Click Here for Return to


PI Sheet Table of Contents
45
P R O D U C T I N F O R M A T I O N

C I T G O S Y N D U R A N C E S Y N T H E T I C
A L L S E A S O N S H E A V Y - D U T Y
T R A N S M I S S I O N F L U I D
Date 03/17

DESCRIPTION: CITGO SynDurance All Seasons Heavy-Duty Transmission Fluid is a new generation, full synthetic,
multigrade, transmission fluid designed for heavy-duty construction equipment with powershift
transmissions, hydraulic systems, final drives and wet brakes that require Caterpillar TO-4 and
Allisons C-4 type fluids.

QUALITIES: The multigrade design reduces inventory by consolidating viscosity grades which eliminates seasonal
change outs. The combination of full synthetic base oil and performance engineered additive
technology extends transmission life and improves overall efficiency in powershift transmissions as
compared to conventional TO-4 fluids. Fluid service life can also be extended when matched with the
CITGO LubeAlert HD Oil Analysis Program. The multigrade design improves cold weather start up
performance and provides superior wear protection while operating at wide temperature ranges. The
unique product design extends clutch life and provides greater power transfer efficiency resulting in
greater productivity and reduced fuel consumption. This fluid is recommended for lubrication of winch,
clutch plates, gears and bearings. It also helps reduce brake chatter in wet brake applications.

APPLICATIONS: Formulated to meet the performance requirements of:


Allison C-4
Transmission/Power Fluids

Caterpillar TO-4, CD/TO-2, TO-4M


Eaton Vickers 35VQ-25
Dana Powershift
Komatsu Micro-Clutch
ZF TE-ML 03C, 07F

BENEFITS: Reduces overall operating costs as a result of:


Improved drive train productivity and reduced fuel consumption
Reduced inventory by consolidating viscosity grades with no seasonal change outs
Longer component life
Extended fluid change intervals up to two times that of conventional TO-4 fluids

TYPICAL PROPERTIES:

CITGO SYNDURANCE SYNTHETIC ALL SEASONS HEAVY-DUTY TRANSMISSION FLUID

Material Code 622685001


Gravity, ASTM D 4052, API 32.4
Density, lbs./gallon 7.0
Flash Point, COC, ASTM D 92, F (C) 453 (234)
Viscosity, ASTM D 445, cSt at 40C 107.0
cSt at 100C 14.7
Viscosity Index, ASTM D 2270 136
Brookfield Apparent Viscosity, 37,000
ASTM D 2983, cP, at Temp, C -39
Pour Point, ASTM D 97, F (C) -38 (-39)
Color, ASTM D 1500 L3.0

CITGO and SynDurance are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CCIITTG
GOO PPeettrroolleeuum
m CCoorrppoorraattiioonn 880000//224488--44668844 HHoouussttoonn,, TT e x a s M a n u f a c t u r e d i n U S A
C10192
C10192

Click Here for Return to


PI Sheet Table of Contents
46
P R O D U C T I N F O R M A T I O N

C I T G O T R A N S G A R D
A T F , M E R C O N
V
Date 07/15

DESCRIPTION: CITGO TRANSGARD ATF, MERCON V is an advanced extended life automatic transmission
fluid designed for Ford transmissions and transaxles. This product may also be used in automatic
transmission units that require a fluid qualified against the Ford MERCON specification.

QUALITIES: Compared with todays multipurpose ATFs, CITGO TRANSGARD ATF, MERCON V offers superior
cold temperature performance, boosted oxidation resistance, extended seal compatibility and
improved wear protection. The fluid is very shear resistant, allowing it to maintain its in-service
viscosity much better than other ATFs. In addition, this product exhibits superior frictional durability
and anti-shudder performance. Fortified against rust, corrosion and foaming. Dyed red for easy
identification. Consult owners manual for Fluid Specification.

APPLICATIONS: CITGO TRANSGARD ATF, MERCON V is recommended for use in all applications requiring
MERCON V, MERCON, DEXRON, ALLISON C-4 and JASO 1A. It is also formulated for use in
most Toyota, Nissan, Honda and other imported vehicles. This product is an excellent choice for
transmissions used in severe service, including passenger car and bus fleets as well as towing
applications, and is designed to exhibit extended life compared with conventional multipurpose ATFs.

Transmission/Power Fluids
TYPICAL PROPERTIES:

CITGO TRANSGARD ATF, MERCON V

Material Code 633122001

Viscosity, cSt at 40C 35


Viscosity, cSt at 100C 7.6
Viscosity Index 189
Specific Gravity @ 60 F 0.851
Pour Point, ASTM D 97, F (C) -60 (-51)
Brookfield Viscosity @ -40 C, cP 9600
Appearance Red

CITGO and TRANSGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CIT
CITGO PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10016C 1 0 0 1 6

Click Here for Return to


PI Sheet Table of Contents
47
P R O D U C T I N F O R M A T I O N

C I T G O T R A N S G A R D
A T F , T Y P E F
Date 03/17

DESCRIPTION: This product is a red-dyed automatic transmission fluid meeting all of the requirements of Ford
Specification M2C33-F, Type F.

QUALITIES: CITGO TRANSGARD ATF, Type F has the following properties:

Oxidation Resistance A high level of oxidation resistance to prevent sludge formation and poor
transmission operation even after extended service at high temperatures.
Temperature Stability Good low temperature shifting yet retaining the necessary viscosity for
proper operation at temperatures in excess of 300F.
Antiwear Selected antiwear additives protect against the scuffing and wear of gears, pumps and
other critical moving parts.
Lubricity Has a high static coefficient of friction. It is designed specifically to provide proper and
reliable operation of clutches requiring a fluid with these unique properties.
Seal Life Scientifically balanced formula provides the necessary seal swell properties and prevents
the deterioration of rubber seals that otherwise can cause leakage.
Transmission/Power Fluids

APPLICATIONS: CITGO TRANSGARD ATF, Type F is recommended for use in all automatic transmissions for
which a Type F fluid (Ford Specification M2C33-F) is specified. Always consult owners manual
for manufacturers recommendation. (Note: Many Ford transmissions require MERCON or Ford
Specification M2C138-CJ or M2C166-H. For these applications, CITGO TRANSGARD,
Multi Purpose ATF is recommended.)
CITGO TRANSGARD Type F is recommended for service fill of power steering units of many Ford
passenger cars and light trucks, and can be used in various antiwear hydraulic fluid applications.
Consult owners manual for Fluid Specification.

TYPICAL PROPERTIES:

CITGO TRANSGARD ATF, TYPE F

Material Code 633105001

Gravity, ASTM D 4052, API 33.5


Pounds Per Gallon 7.14
Flash Point, COC, ASTM D 92, F (C) 405 (207)
Viscosity, ASTM D 445, cSt at 100C 7.57
Viscosity,ASTM D 2161, cSt at 40C(1) 41.1
Viscosity,ASTM D 2161, cP at -18C(1) 1,040
Viscosity,ASTM D 2161, cP at -40C(1) 38,000
Viscosity Index, ASTM D 2270 154
Pour Point, ASTM D 97, F (C) -43 (-42)
Color Red

CITGO and TRANSGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

C I T G O P e t r o l e u m C o r p o r a t i o n 8 0 0 / 2 4 8 - 4 6 8 4 H o u s t o n , Te x a s M a n u f a c t u r e d i n U S A
C10019
C10019

Click Here for Return to


PI Sheet Table of Contents
48
P R O D U C T I N F O R M A T I O N

C I T G O T R A N S G A R D
A T F + 4

Date 09/15

DESCRIPTION: CITGO TRANSGARD ATF+4 is a full synthetic automatic transmission fluid recommended for
use in Chrysler vehicles. It has been extensively tested and approved by Chrysler under material
specification MS-9602.

QUALITIES: CITGO TRANSGARD ATF+4 has the following qualities:


Full Synthetic Formulation provides outstanding protection under the most demanding conditions.
Superior wear protection and anti-shudder durability, resulting in a more consistent viscosity
profile for improved shift performance and extended transmission life.
Improved Low Temperature Operating Range to provide smoother shifts and reduce wear on
transmission components during cold weather operation.
Increased Oxidation and Thermal Stability to prevent sludge formation and thereby maintain good
transmission operation even after extended service at high temperatures.
Extended Drain Intervals over previous ATF+3 standard.

Transmission/Power Fluids
APPLICATIONS: CITGO TRANSGARD ATF+4 has been tested and approved for use by FCA US LLC.
It is recommended for top-up and refill of all automatic transmissions in Dodge, Chrysler and Jeep
vehicles where ATF+4, ATF+3 or MS 7176 are called for.
Do not use ATF+4 where DEXRON-III, DEXRON-IIE, or MERCON automatic transmission fluid is
recommended. Consult owners manual for fluid recommendations.

TYPICAL PROPERTIES:

CITGO TRANSGARD ATF+4

Material Code 633179001

Gravity, ASTM D 4052, API 34.9


Pounds Per Gallon 7.08
Flash Point, COC, ASTM D 92, F (C) 399 (204)
Viscosity, ASTM D 445, cSt at 40C 34.89
cSt at 100C 7.4
cP at -28.9C 2,050
cP at -40C 9,000
Viscosity Index, ASTM D 2270 190
Pour Point, ASTM D 97, F (C) -70 (-57)
Color Red

Meets Specification MS-9602. ATF+4 is a trademark of FCA US LLC, used under license number 40630037.
CITGO and TRANSGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CIT
CITGO PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10160C 1 0 1 6 0

Click Here for Return to


PI Sheet Table of Contents
49
P R O D U C T I N F O R M A T I O N

C I T G O T R A N S G A R D
C V T F L U I D
Date 08/15

DESCRIPTION: This Full Synthetic, Continuously Variable Transmission Fluid is specifically formulated to prolong and
protect transmission life in modern high technology belt and chain-driven CVT transmissions. It helps
maintain smooth operation, reduces transmission wear and degrades less over time.

QUALITIES: Maintains viscosity control over the life of the fluid for smooth shifting and fuel economy.
Prevents wear in metal contacts while maintaining the proper frictional values to transfer high levels
of torque and prevent shudder.
Excellent oxidation control to maximize fluid life and maintain chemical properties.

APPLICATIONS: CITGO TRANSGARD CVT Fluid is recommended for use in most foreign and domestic belt and
chain-driven CVT transmissions and is suitable for use in the following vehicles where CVT Fluid is
recommended:
Audi/VW TL52180, G052180, G052516 Mazda CVTF 3320
Ford CFT30/WSS-M2C933-A/ Mercedes Benz CVT28, MB-Approval 236.20
Motorcraft XT-7-QCFT, MERCON C Mini Cooper EZL 799A, ZF CVT V1
Transmission/Power Fluids

SUBARU i-CVTF, Lineartronic CVTF, Mitsubishi DiaQueen CVTF-J1


K0425Y0710, CV-30
Nissan NS-1, NS-2
BMW 8322 0 136 376, 8322 0 429 154, EZL 799A
Punch EZL 799A
Daihatsu Amix CVTF-DC
Shell Green 1V
Dodge/Jeep NS-2, CVTF+4, Mopar CVT 4
Subaru e-CVTF
Ford CVT23
Suzuki CVTF 3320, TC, NS-2, CVTF Green 1
GM/Saturn DEX-CVT
Toyota Lexus TC
Honda HMMF, HCF-2
Hyundai/Kia SP-CVT1

NOT for E-CVT or Non-CVT transmissions. Consult owners manual for fluid recommendations.

TYPICAL PROPERTIES:

CITGO TRANSGARD CVT FLUID

Material Code 633134001

Gravity, ASTM D 287, API 34.5


Density, Pounds Per Gallon 7.1
Flash Point, P.M. D 93, C 190
Pour Point, ASTM D 97, F (C) -40
Viscosity, 40C, cSt, D 445 34.5
100C, cSt, D 445 7.3
Index, D 2270 185
Brookfield Viscosity @ -40C 10,000
Color Red
_______
CITGO and TRANSGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10230C 1 0 2 3 0

Click Here for Return to


PI Sheet Table of Contents
50
P R O D U C T I N F O R M A T I O N

C I T G O T R A N S G A R D
D E X R O N
- V I A T F
Date 07/15

DESCRIPTION: CITGO TRANSGARD DEXRON-VI ATF is a full synthetic automatic transmission fluid approved and
licensed by General Motors for use in its vehicles with automatic transmissions. This fluid is designed
to provide twice the normal service life of a DEXRON-IIIH ATF. It offers enhanced performance for
both new and older model transmissions.

QUALITIES: Full synthetic formulation providing outstanding protection under the most demanding conditions
Extends fluid and transmission life and offers the potential to extend drain intervals
Outstanding oxidation life and thermal stability offering resistance to sludge and varnish formation
Superior anti-wear protection
Improved low temperature viscosity
Optimized frictional properties to prevent shudder; and extend fluid and clutch durability
Improved fuel economy versus DEXRON-IIIH fluids
Increased shear stability

APPLICATIONS: CITGO TRANSGARD DEXRON-VI ATF is recommended for use in automatic transmissions
manufactured by General Motors. The product is backward compatible and can be used in all

Transmission/Power Fluids
General Motors cars and trucks where DEXRON-III, DEXRON-IIE and DEXRON-II type fluids were
called for. TRANSGARD DEXRON-VI ATF was specifically designed for use in the Hydra-Matic
6-speed transmission.
Do not use DEXRON-VI in applications calling for Ford MERCON, MERCON V, MERCON SP, or
Type F. DEXRON-VI is not suitable for use in non-GM vehicles which called for DEXRON-III or
DEXRON-II type fluids. In these applications CITGO recommends the use of TRANSGARD
Multi-Purpose ATF. Consult owners manual for fluid recommendations.

TYPICAL PROPERTIES:

CITGO TRANSGARD DEXRON-VI ATF

Material Code 633140001

Gravity, ASTM D 4052, API 35.35


Pounds Per Gallon 7.05
Flash Point, COC, ASTM D 92, F (C) 403 (206)
Pour Point, ASTM D 97, F (C) -65 (-54)
Viscosity, ASTM D 445, cSt at 40C 29.7
cSt at 100C 6.0
ASTM D 2983, cP at -20C 1,050
cP at -40C 10,000
Viscosity Index, ASTM D 2270 150
Color Red

CITGO and TRANSGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

C I T GC
O I TPG
eOt r oPl e ut rmo l C
e uo m
r p oCroartpi o nr a t i o
8n0 0/ 284080-/4264884- 46 8
H 4o u s H
t oonu, s T
t oenx ,a sT e x M
a sa n u M
f aacdt eu r iend Ui n
S AU S A
C10165C 1 0 1 6 5

Click Here for Return to


PI Sheet Table of Contents
51
P R O D U C T I N F O R M A T I O N

C I T G O T R A N S G A R D H E A V Y - D U T Y
T R A N S M I S S I O N F L U I D S
Date 07/15

DESCRIPTION: CITGO TRANSGARD Heavy-Duty Transmission Fluids are new generation Allison C-4 and CAT
TO-4 transmission and drivetrain fluids. They are designed for heavy-duty construction equipment
powershift transmissions, final drives and wet brakes. Compared to engine oil, TRANSGARD Heavy-
Duty Transmission Fluids will improve transmission performance and power transfer under conditions
of high horsepower output, increased loads, and higher transmission operating temperatures
associated with heavy equipment. Base stocks and additives are carefully selected for compatibility
with clutch face and seal materials.
Available Viscosity Grades: 10W, 30, 50 and 60.

QUALITIES: CITGO TRANSGARD Heavy-Duty Transmission Fluids provide longer transmission life than heavy-
duty engine oils.
In meeting Allison C-4 (SAE 10W and 30 grades), Komatsu Micro-Clutch and Caterpillar TO-4
requirements, CITGO TRANSGARD Heavy-Duty Transmission Fluids offer improved performance
while allowing product consolidation. They are offered in four viscosity grades to meet summer and
winter powershift requirements. CITGO TRANSGARD Heavy-Duty Transmission Fluids compatibility
with asbestos-free clutch materials offers extended clutch life. Due to their physical and chemical
Transmission/Power Fluids

properties, TRANSGARD Heavy-Duty Transmission Fluids provide greater power transfer efficiency.
These fluids are recommended for lubrication of winch, clutch plates, gears and bearings. They will
help reduce brake chatter in wet brake applications.

APPLICATIONS: Formulated to meet the performance requirements of:


Allison C-4 SAE 10W and 30 grades
Caterpillar TO-4, CD/TO-2 all grades
Komatsu Micro-Clutch all grades

BENEFITS: Use of CITGO TRANSGARD Heavy-Duty Transmission Fluids pay big dividends through reduced
maintenance costs, longer equipment life, reduced downtime and higher production output. These are
provided through reduced gear wear, improved friction control and greater rimpull. Rust and corrosion
control protects gear cases and drive trains under the most severe conditions. The SAE 60 grade
provides the greatest fluid film thickness for wear protection during severe operation.

(Continued)

(Continued)

C I T GC
OI TPGe O
t r oPl e
eut rm C uo m
ole r p oCroartpi o
onr a t i o8 n0 0/ 284080-/4264884- 46 8
H 4o u s H
t oonu, s T
t oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10020C 1 0 0 2 0

Click Here for Return to


PI Sheet Table of Contents
52
P R O D U C T I N F O R M A T I O N

C I T G O T R A N S G A R D H E A V Y - D U T Y
T R A N S M I S S I O N F L U I D S
(Continued)
D ate 07/15 - (Continued)

TYPICAL PROPERTIES:

CITGO TRANSGARD HEAVY-DUTY TRANSMISSION FLUIDS

SAE Grade 10W 30 50 60


Material Code 633321001 633323001 633325001 633326001
Gravity, ASTM D 4052, API 31.1 31.0 27.3 25.2
Density, lbs./gallon 7.30 7.37 7.49 7.51
Flash Point, COC, ASTM D 92, F (C) 420 (216) 446 (230) 511 (266) 532 (278)
Viscosity, ASTM D 445, cSt at 40C 38.1 96 209 330
cSt at 100C 6.3 11.3 18.8 25.5
Viscosity Index, ASTM D 2270 112 104 100 100
Brookfield Apparent Viscosity, 23,000 80,000 45,000 139,500
ASTM D 2983, cP, at Temp, C -35 -25 -15 -15
Pour Point, ASTM D 97, F (C) -38 (-39) -27 (-33) +5 (-18) 0 (-18)
Color, ASTM D 1500 L3.0 L3.5 4.0 L7.0

Transmission/Power Fluids
CITGO and TRANSGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10020C 1 0 0 2 0

Click Here for Return to


PI Sheet Table of Contents
53
P R O D U C T I N F O R M A T I O N

C I T G O T R A N S G A R D
M U L T I - P U R P O S E A T F
Date 08/15

DESCRIPTION: CITGO TRANSGARD Multi-Purpose ATF is an automatic transmission fluid designed for electronically-
controlled transmissions. This product is specifically designed for use in General Motors transmissions
calling for DEXRON -III, DEXRON -IIE and DEXRON -II fluids. It can also be used in Ford
transmissions calling for MERCON type ATFs. CITGO TRANSGARD Multi-Purpose ATF meets
the performance requirements for Allison Transmission Division (C-4) and major hydraulic pump
manufacturers requirements for anti-wear hydraulic fluids

QUALITIES: Superior cold temperature performance characteristics. Wide range of seal compatibility. Excellent
wear protection. Superior frictional characteristics with excellent friction retention and smooth shifting.
Fortified against rust and corrosion. Excellent oxidation resistance. Meets requirements for foam
protection. Dyed red for easy identification.

APPLICATIONS: CITGO TRANSGARD Multi-Purpose ATF is recommended for use in automatic transmissions
manufactured by General Motors and Ford for model years 2006 and prior (except those calling
for FORD Type F Fluid, MERCON SP, MERCON V, DEXRON -VI and CVT fluids). This product
is suitable for use in foreign cars and trucks requiring the use of DEXRON -III, DEXRON -IIE,
Transmission/Power Fluids

DEXRON -II fluids, and MERCON type ATFs. CITGO TRANSGARD Multi-Purpose ATF is suitable
for use in powershift transmissions, torque converters, hydrostatic transmissions and applications
such as in air compressors, hydraulic pumps, power steering boxes and other types of service
where an ATF is recommended.
CITGO TRANSGARD Multi-Purpose ATF is a truly multifunctional transmission fluid for passenger cars,
trucks, construction and mining equipment, farm machinery and other mobile and industrial systems.
Consult owners manual for fluid specification.

TYPICAL PROPERTIES:

CITGO TRANSGARD MULTI-PURPOSE ATF

Material Code 633135001

Gravity, ASTM D 4052, API 32.9


Pounds Per Gallon 7.15
Flash Point, COC, ASTM D 92, F (C) 424 (218)
Pour Point, ASTM D 97, F (C) -54 (-48)
Viscosity, ASTM D 445, cSt at 40C 34.3
cSt at 100C 6.95
ASTM D 2983, cP at 20C 1,020
cP at -40C 15,100
Viscosity Index, ASTM D 2270 169
Color Red

CITGO and TRANSGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10162C 1 0 1 6 2

Click Here for Return to


PI Sheet Table of Contents
54
P R O D U C T I N F O R M A T I O N

C I T G O T R A N S G A R D M U L T I - V E H I C L E
H I G H - V I S C O S I T Y A T F
Date 03/16

DESCRIPTION: CITGO TRANSGARD Multi-Vehicle High-Viscosity ATF contains the highest quality synthetic base
stocks combined with a state of the art additive system to provide superior performance in automatic
and powershift transmissions. It is suitable for use in transmissions calling for Ford MERCON V, Ford
MERCON (obsolete), General Motors DEXRON -IIIH (obsolete), and Allison C-4 type fluids.

FEATURES/ Superior oxidation and thermal stability


BENEFITS: Outstanding anti-wear performance for protection of transmission hardware
Excellent cold temperature flow properties
Compatible with a wide range of seal materials to prevent transmission leaks
Can be used in most vehicles
Provides inventory optimization (multi-vehicle compatible) without the use of ATF supplements

APPLICATIONS: CITGO TRANSGARD Multi-Vehicle High-Viscosity ATF is suitable for use where the following
applications are recommended:
Ford MERCON and MERCON V

Transmission/Power Fluids
GM DEXRON -II and DEXRON -III
Allison C-4
BMW LT-71141, ETL-7045E, 2634, 8072B
Nissan/Infiniti Nissan ATF, Matic D, Matic J, and Matic K
Mitsubishi Diamond SP-II and SP-III
Hyundai/KIA SP-II and SP-III
Toyota/Lexus Type T, T-III and T-IV
Honda/Acura ATF-Z1 (except in CVTs)
Mercedes Benz 236.3; .5; .6; .7; .9; .10; and .11; ATF 3403 M-115
Volkswagen/Audi G052025 (09M); G052990 (09A)
ZF TE-ML-03D; 04D; 14A; 14B; 16L; 17C
Do not use CITGO TRANSGARD Multi-Vehicle High-Viscosity ATF in vehicles calling for Type F,
DEXRON VI, MERCON SP, MERCON LV, Toyota/Lexus WS, and CVTs. Consult owners manual for
fluid specification.

(Continued)

(Continued)

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10168C 1 0 1 6 8

Click Here for Return to


PI Sheet Table of Contents
55
P R O D U C T I N F O R M A T I O N

C I T G O T R A N S G A R D M U L T I - V E H I C L E
H I G H - V I S C O S I T Y A T F
D ate 03/16 - (Continued)
(Continued)

TYPICAL PROPERTIES:

CITGO TRANSGARD MULTI-VEHICLE HIGH-VISCOSITY ATF

Material Code 633131001

Viscosity, cSt at 40C 35


Viscosity, cSt at 100C 7.2
Viscosity Index 178
Specific Gravity @ 60 F 0.851
Pour Point, ASTM D97, F (C) -60 (-51)
Brookfield Viscosity @ -40 C, cP 9600
Appearance Red
_______
CITGO and TRANSGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
This is not a licensed GM or Ford product.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
Transmission/Power Fluids

without notice.

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10168C 1 0 1 6 8

Click Here for Return to


PI Sheet Table of Contents
56
P R O D U C T I N F O R M A T I O N

C I T G O T R A N S G A R D S Y N T H E T I C
M U L T I - V E H I C L E L O W - V I S C O S I T Y A T F
Date 08/15

DESCRIPTION: CITGO TRANSGARD Synthetic Multi-Vehicle Low-Viscosity ATF contains the highest quality synthetic
base stocks combined with a state of the art additive system to provide superior performance in
automatic and powershift transmissions.

QUALITIES: Superior oxidation and thermal stability


Outstanding anti-wear performance for protection of transmission hardware
Excellent cold temperature flow properties
Compatible with a wide range of seal materials to prevent transmission leaks
Can be used in most vehicles
Provides inventory optimization (multi-vehicle compatible) without the use of ATF supplements.

APPLICATIONS: CITGO TRANSGARD Synthetic Multi-Vehicle Low-Viscosity ATF is suitable for use where the
following products are recommended:
GM vehicles recommending DEXRON -III
DEXRON -VI

Transmission/Power Fluids
MERCON LV
JASO 1A
Toyota WS
Honda DW-1
Nissan/Infiniti Matic S
Hyundai SP-IV
Do not use CITGO TRANSGARD Synthetic Multi-Vehicle Low-Viscosity ATF in vehicles calling for
Type F, MERCON SP, or CVTs. Consult owners manual for fluid specification.

TYPICAL PROPERTIES:

CITGO TRANSGARD SYNTHETIC MULTI-VEHICLE LOW-VISCOSITY ATF

Material Code 633137001

Gravity, ASTM D 287, API 36.8


Density, Pounds Per Gallon 7.05
Flash Point, P.M. D 93, C 220
Viscosity, 100C, cSt, D 445 6.0
Brookfield Viscosity @ -40C 11,900
Color Red
_______
CITGO and TRANSGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
This is not a licensed GM or Ford product.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10229C 1 0 2 2 9

Click Here for Return to


PI Sheet Table of Contents
57
P R O D U C T I N F O R M A T I O N

C I T G O T R A N S G A R D T R A C T O R
H Y D R A U L I C F L U I D S
Date 09/15

DESCRIPTION: CITGO TRANSGARD Tractor Hydraulic Fluids (including CITGO TRANSGARD Lo-Temp Tractor
Hydraulic Fluid) are multifunctional tractor hydraulic/transmission fluids which perform the
following functions:
Lubricate the transmission, differential and final drive gears.
Act as a power steering, power brake, power take-off and implement drive fluid.
Provide a medium with the correct friction and heat transfer characteristics for proper operation of
the tractor wet brakes and power take-off unit.
CITGO TRANSGARD Lo-Temp Tractor Hydraulic Fluid is specially designed to provide outstanding
low temperature fluidity under the coldest conditions. It has the same performance benefits as CITGO
TRANSGARD Tractor Hydraulic Fluid, but is intended for applications where a lower viscosity fluid
is desired.

QUALITIES: The following characteristics make CITGO TRANSGARD Tractor Hydraulic Fluids outstanding
products for multi-functional application:
Superior extreme pressure (EP) and antiwear performance protects tractor transmissions, axles and
Transmission/Power Fluids

hydraulic pumps. The frictional characteristics are designed to minimize chatter while permitting the
wet brakes to hold properly. This frictional balance also provides smooth engagement of the power
take-off clutch.
Special blend of base stocks helps maintain seals and gaskets.
Balanced formulations provide excellent rust and corrosion protection as well as excellent oil
oxidation stability for high-temperature service.
Is approved by Denison Hydraulics as an HF-0 quality fluid.

APPLICATIONS: CITGO TRANSGARD Tractor Hydraulic Fluids


For use in equipment where the following fluids are recommended:
Allison C-4 Kubota UDT
API GL-4 Massey Ferguson M-1145
CAT TO-2 John Deere J20C/J20D (Low-Temp Only)
Denison HF-0, HF-1, HF-2 Case New Holland: MAT 3525
Eaton Vickers I-286-S, M-2950-S

Suitable for use in:


AGCO Kubota
Case IH Massey Ferguson
KH Deutz New Holland
Ford Volvo WB101
John Deere White and others
Komatsu

(Continued)

(Continued)

CIT
CITGO PGe tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, sTt oe nx ,a sT e x M
a sa n u M
f aacdt u
ere
i nd Ui nS AU S A
C10022C 1 0 0 2 2

Click Here for Return to


PI Sheet Table of Contents
58
P R O D U C T I N F O R M A T I O N

C I T G O T R A N S G A R D T R A C T O R
H Y D R A U L I C F L U I D S
D ate 09/15 - (Continued)
(Continued)

TYPICAL PROPERTIES:

CITGO TRANSGARD TRACTOR HYDRAULIC FLUIDS

TRACTOR LOW-TEMP TRACTOR


HYDRAULIC FLUID HYDRAULIC FLUID

Material Code 633310001 633311001


Gravity, ASTM D 4052, API 31.0 32.3
Density, lb/gal 7.30 7.20
Flash Point, COC, ASTM D 92, F (C) 450 (232) 406 (208)
Viscosity, ASTM D 2983, cP at -4F (-20C) 5,500 1,500
Viscosity, ASTM D 2983, cP at -29F (-35C) 48,200
Viscosity, ASTM D 2983, cP at -40F (-40C) 15,300
ASTM D 445, cSt at 40C 60.3 33.7
cSt at 100C 9.6 7.15
Viscosity Index, ASTM D 2270 140 183
Pour Point, ASTM D 97, F (C) -40 (-40) -54 (-48)

Transmission/Power Fluids
Color, ASTM D 1500 3.0 2.5
Foam Test, ASTM D 892, Sequence I, II, III Pass Pass

CITGO and TRANSGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10022C 1 0 0 2 2

Click Here for Return to


PI Sheet Table of Contents
59
P R O D U C T I N F O R M A T I O N

C I T G O C O T T O N P I C K E R S P I N D L E G R E A S E
Date 07/16

DESCRIPTION: CITGO Cotton Picker Spindle Grease is a unique semi-fluid formula developed to provide exceptional
flow performance. It is optimized to provide consistent flow for optimal protection of the picker
spindles. This fluidity allows it to lubricate in tough applications. Properly lubricated spindles can
operate at peak performance, plucking cotton from bolls without tearing.

FEATURES: Special semi-fluid, lithium-based grease that provides low friction and channeling resistance
Flows freely, but resists excessive leakage from spindle bearings
Performs well over a wide temperature range, results in low, cold weather starting torque
Soft consistency, channel resistant
Resists leakage from bearings reducing cotton staining
Easy to dispense or pump

APPLICATIONS: For use in low to normal temperatures under light loads. Consult owners manual for proper
lubricant selection.

TYPICAL PROPERTIES:

CITGO COTTON PICKER SPINDLE GREASE


NLGI Grade 00
Material Code 655773001
Thickener Lithium Stearate
Texture Smooth, Short Fiber
Color, Observed Light Green, Low-Staining
Worked 60 Penetration, ASTM D217 400-430
Approximate Temperature Range, F (C) 5 to 200 (-15 to 93)
Base Oil Viscosity: 40C, cSt 20

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
Greases

without notice.

CCI ITTGGOO PPeet tr rool e


l euumm CCoor rppoor raat ti o
i onn 880000/ /224488- -44668844 HHoouusst toonn, , TTeexxaass MMaannuuf faacct tuur reedd i n
i n UUSSAA
C10240C 1 0 2 4 0

Click Here for Return to


PI Sheet Table of Contents
60
P R O D U C T I N F O R M A T I O N

C I T G O J E T L U B R I C A N T T M
Date 09/16

DESCRIPTION: CITGO Jet Lubricant TM is a quality soap-thickened petroleum resin based compound for use as
a Traction Motor Gear Lubricant in heavy duty, high speed locomotive gear boxes. It provides an
adhesive film that protects gears under heavy loads.

QUALITIES: CITGO Jet Lubricant TM is formulated from petroleum resins to ensure good adhesion.
CITGO Jet Lubricant TM is available in drums and in one pound polyethylene bags for ease of
application.

APPLICATIONS: CITGO Jet Lubricant TM is an excellent lubricant for various open and closed gear cases and certain
slow moving open gears used throughout the industry.
GE Specification D50 E8C
Consult owners manual for proper lubricant selection.

TYPICAL PROPERTIES:

CITGO JET LUBRICANT TM

Material Code 655780001

Soap Type Sodium


Texture Tacky
Color Dark Brown
Brookfield Viscosity, cP at 200F 5,000 - 10,000
Timken OK Load, ASTM D2509, lbs 40
Four Ball EP Weld, ASTM D2596, kgf 250
Load Wear Index, ASTM D2596 38

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

Greases

CITGO Petroleum Corporation 800/248-4684 Houston, Texas Manufactured in USA


C I T G O CP1 e0 t1r 3o 5l e u m C o r p o r a t i o n 8 0 0 / 2 4 8 - 4 6 8 4 H o u s t o n , T e x a s M a n u f a c t u r e d i n U S A
C10135

Click Here for Return to


PI Sheet Table of Contents
61
P R O D U C T I N F O R M A T I O N

C I T G O L I T H O P L E X
C M & H M G R E A S E S
Date 09/16

DESCRIPTION: CITGO Lithoplex CM and Lithoplex HM greases provide outstanding protection in construction and
mining applications where exceptional wear protection is required due to heavy shock load conditions.
These premium quality lithium complex greases contain molybdenum disulfide for additional protection
in harsh environments which reduces frictional and abrasive wear on components. The results are
increased equipment life and lower maintenance costs.

QUALITIES: The CITGO Lithoplex grease family represents the latest technology in greases. These Lithoplex
greases contain extreme pressure (EP) additives, anti-wear (AW) additives, oxidation inhibitors, and
corrosion inhibitors. They are suitable for use at higher temperatures than conventional soap greases.
Extreme Pressure and Wear Protection: Lithoplex CM and Lithoplex HM provide excellent extreme
pressure and anti-wear protection. Lithoplex CM contains 3% moly disulfide and Lithoplex HM
contains 5% moly disulfide to provide additional protection in harsh environments. These products are
a good choice in applications where metal to metal friction and high loads exist.
Corrosion Protection: Lithoplex CM and HM are formulated to resist corrosion, thereby extending
equipment life. This is of particular importance in applications where moisture is present.
Oxidation Resistant Formulation: These greases contain oxidation inhibitors to extend grease life
and protect the application for longer periods.
Polymer Fortified: Lithoplex CM and Lithoplex HM contain polymer for improved water resistance
and improved adhesion.

APPLICATIONS: Lithoplex CM contains three percent moly disulfide and Lithoplex HM contains five percent moly
disulfide to meet equipment manufacturers requirements. Applications include construction
equipment, mining equipment, fifth wheels, industrial applications, bucket pins, crusher bearings, pin
and bushings, pivot pins, track drive rollers.
Consult owners manual for proper lubricant selection.
Greases

(Continued)

(Continued)

CC
I TI G
TGO OP P
e tertor loel ue m
u mC C
o ropr o
p roar tai toi n
o n 8 0
800 /02/ 4
2488
- 4- 4
6688
4 4 H H
oouu
s tsot o
n n, , T Te ex xa as s MMa an nu uf af ac ct ut ur er ed d i ni n UUSSAA
C10154 C 1 0 1 5 4

Click Here for Return to


PI Sheet Table of Contents
62
P R O D U C T I N F O R M A T I O N

C I T G O L I T H O P L E X
C M & H M G R E A S E S
(Continued)
D ate 09/16 - (Continued)

TYPICAL PROPERTIES:

CITGO LITHOPLEX CM & HM GREASES

Lithoplex Lithoplex Lithoplex Lithoplex


Product CM1 CM2 HM1 HM2

NLGI Grade 1 2 1 2

Material Code 655351001 655352001 655356001 655357001

Worked-60 Penetration 310-340 265-295 310-340 265-295


Grease Type Lithium Lithium Lithium Lithium
Complex Complex Complex Complex
Color Gray Gray Gray Gray
Texture Smooth, Smooth, Smooth, Smooth,
Adhesive Adhesive Adhesive Adhesive
Four-Ball Weld, ASTM D2596, kgf 400 400 500 500
Four-Ball Load Wear Index,
ASTM D2596 64 64 64 64
Four-Ball Wear, ASTM D2266, mm 0.45 0.45 0.40 0.40
Rust Protection, ASTM D1743 Pass Pass Pass Pass
Water Washout, 175F,
ASTM D1264, % Loss 2.0 2.0 2.5 2.0
Dropping Point, ASTM D2265, F 500 500 500 500
Molybdenum Disulfide, % 3 3 5 5
Viscosity: 40C, cSt 285 375 375 375

CITGO and Lithoplex are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

Greases

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10154C 1 0 1 5 4

Click Here for Return to


PI Sheet Table of Contents
63
P R O D U C T I N F O R M A T I O N

C I T G O L I T H O P L E X
M P G R E A S E S
Date 09/16

DESCRIPTION: CITGO Lithoplex MP Greases represent the latest technology in greases. They are quality extreme
pressure greases designed to be highly versitle and have long life. They provide dependable
performance in a broad range of applications including automotive chassis, wheel bearing and other
critical grease points. Excellent performance over a wide temperature range.

QUALITIES: CITGO Lithoplex MP Greases are multipurpose greases incorporating the following characteristics:
Excellent Work Stability Extremely stable lithium complex formula retains its consistency even in
the most severe service.
Extreme Pressure and Anti-Wear Protection Additives provide excellent extreme pressure and
anti-wear protection under severe conditions.
Corrosion Protection Lithoplex greases resist corrosion, thereby extending equipment life. This is
of particular importance in applications where moisture is present.
Oxidation Resistant Formulation Lithoplex greases contain oxidation inhibitors to extend grease
life and protect the application for longer periods.

APPLICATIONS: Lithoplex MP Greases are compatible with conventional lithium soap greases. They contain extreme
pressure (EP) additives and Molybdenum Disulfide (moly) to minimize wear in heavily loaded
components. These greases satisfy a wide range of industrial and automotive applications including
bearings, ball joints and bushings. Three NLGI consistencies are available.
Lithoplex MP 1 and MP 2 Greases meet the ASTM D 4950 requirements for Wheel Bearing Grease
Category GC and Chassis Grease Category LB.
Consult owners manual for proper lubricant selection.

AUTOMOTIVE
WHEEL BEARING & CHASSIS
LUBRICANT

GC-LB
Greases

(Continued)

(Continued)

CCI ITTGGOO PPeet tr rool e


l euumm CCoor rppoor raat ti o
i onn 880000/ /224488- -44668844 HHoouusst toonn, , TTeexxaass MMaannuuf faacct tuur reedd i n
i n UUSSAA
C10025C 1 0 0 2 5

Click Here for Return to


PI Sheet Table of Contents
64
P R O D U C T I N F O R M A T I O N

C I T G O L I T H O P L E X
M P G R E A S E S
(Continued)
D ate 09/16 - (Continued)

TYPICAL PROPERTIES:
CITGO LITHOPLEX MP GREASES

Product Lithoplex MP0 Lithoplex MP1 Lithoplex MP2


NLGI Grade 0 1 2
Material Code 655342001 655341001 655340001
Worked 60 Penetration 355-385 310-340 265-295
Grease Type Lithium Complex Lithium Complex Lithium Complex
Color Gray Gray Gray
Texture Smooth, Adhesive Smooth, Adhesive Smooth, Adhesive
Four-Ball Weld, ASTM D2596, kgf 315 315 315
Four-Ball Load Wear Index, ASTM D2596 55 58 58
Four-Ball Wear, ASTM D2266, mm 0.50 0.45 0.45
Rust Protection, ASTM D1743 Pass Pass Pass
Water Washout, 175F, ASTM D1264, % Loss 8.3 5.0 2.0
Dropping Point, ASTM D2265, F 500 530
NLGI Certified, ASTM D4950 GC-LB GC-LB
Viscosity: 40C, cSt 230 230 230

CITGO and Lithoplex are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

Greases

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10025C 1 0 0 2 5

Click Here for Return to


PI Sheet Table of Contents
65
P R O D U C T I N F O R M A T I O N

C I T G O L I T H O P L E X
P L G R E A S E S
Date 09/16

DESCRIPTION: CITGO Lithoplex PL Greases are developed with unique semi-fluid formulas to provide exceptional
flow performance. They are designed to provide consistent lubricant flow for optimal protection of frac
pump plungers. Properly lubricated plungers can operate at peak performance, maximizing up time.

FEATURES: Superior lubricant barrier to prevent seal failures


Protects against friction and heat damage
Exceptional extreme pressure (EP) protection
Excellent anti-wear prolongs plunger life
Outstanding resistance to rust and corrosion on copper and brass
Performs well over a wide temperature range

APPLICATIONS: For use with frac pump plungers where excellent adhesion, pumpability, corrosion resistance, wear
and extreme pressure protection are needed.
Designed to work with automatic lubricators. Consult owners manual for proper lubricant selection.

TYPICAL PROPERTIES:

CITGO LITHOPLEX PL GREASES


NLGI Grade 0 00 000

Material Code 655540001 655539001 655538001

Thickener Lithium Complex Lithium Complex Lithium Complex


Texture Smooth, Short Fiber Smooth, Short Fiber Smooth, Short Fiber
Color, Observed Green Green Green
Worked 60 Penetration,
ASTM D217 355-385 400-430 445-475
4-Ball EP, Weld, kg 315 315 315
4-Ball Wear 0.40 0.40 0.40
Copper Corrosion 1a 1a 1a
Rust, ASTM D1743 Pass Pass Pass
Greases

US Steel Mobility @ 0F, gpm 54 71 77


Approximate Temperature
Range, F (C) 0 to 325 (-18 to 163) 0 to 325 (-18 to 163) 0 to 325 (-18 to 163)
Base Oil Viscosity: 40C, cSt 320 320 320

CITGO and Lithoplex are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

CCI ITTGGOO PPeet tr rool leeuumm CCoor rppoor raat ti ioonn 880000/ /224488- -44668844 HHoouusst toonn, , TTeexxaass MMaannuuf faacct tuur reedd i inn UUSSAA
C10239C 1 0 2 3 9

Click Here for Return to


PI Sheet Table of Contents
66
P R O D U C T I N F O R M A T I O N

C I T G O L I T H O P L E X
P M G R E A S E
Date 09/16

DESCRIPTION: CITGO Lithoplex PM Grease is designed to provide outstanding performance in industrial


applications. This product provides excellent protection in severe applications of plain and rolling
bearings that operate in mild to high temperatures. CITGO Lithoplex PM Grease is recommended for
use in many other industrial, agricultural, and mining applications where exceptional wear protection
and outstanding extreme pressure/high load protection is required.

QUALITIES: Corrosion Protection: CITGO Lithoplex PM Grease protects equipment from corrosion and passes
the ASTM D1743 Corrosion Test.
Extreme Pressure Protection: This product provides excellent protection in applications where high
loads exist. CITGO Lithoplex PM Grease has a high Timken OK Load rating.
Wear Protection: This product provides superior protection in applications where metal to metal
friction exists. CITGO Lithoplex PM Grease has a low Four-Ball Wear Scar.
Stays in Place: CITGO Lithoplex PM Grease is polymer fortified for improved adhesion.
Water Resistance: The polymer fortification makes CITGO Lithoplex PM Grease highly resistant
to water.

APPLICATIONS: CITGO Lithoplex PM Grease is a versatile lithium complex grease that will hold up in many situations
where other products fail. This product is recommended for applications where outstanding wear
protection, water resistance, corrosion resistance, and extreme pressure protection is required.
Consult owners manual for proper lubricant selection.

TYPICAL PROPERTIES:

CITGO LITHOPLEX PM GREASE


NLGI Grade 2
Material Code 655437001
Worked-60 Penetration, ASTM D217 265-295
Thickener Lithium Complex
Color Red
Texture Smooth, Adhesive
Dropping Point, F, ASTM D2265 500F

Greases
Rust Prevention, ASTM D1743, rating Pass
Water Washout, ASTM D1264, % Loss @ 175F 2.5
Timken OK Load, ASTM D2509, Lb. 80
Four-Ball Wear, ASTM D2266, mm 0.48
Base Oil Viscosity: 40C, cSt 155

CITGO and Lithoplex are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

CCI TI TGGOO PPe et rt or ol el eu umm CCo or pr po or ar at it oi on n 8 80 00 0/ 2/ 24 48 8- 4- 46 68 84 4 HHo ou us st ot on n, , T Te ex xa as s MMa an nu uf af ac ct ut ur er ed d i ni n UUSSAA


C10191C 1 0 1 9 1

Click Here for Return to


PI Sheet Table of Contents
67
P R O D U C T I N F O R M A T I O N

C I T G O L I T H O P L E X
P T G G R E A S E
Date 07/16

DESCRIPTION: CITGO Lithoplex PTG Grease is an excellent choice for power tool lubrication in bearings and gears
found in power tools. A high quality grease that ensures peak performance of the tool in prolonged
industrial or construction applications. Proper lubrication not only extends the effective service life
but improves the operating efficiency. CITGO Lithoplex PTG Grease has the ability to resist sudden
stress, sustain performance and absorb shock loads without losing the ability to lubricate gears and
bearings effectively.

QUALITIES: CITGO Lithoplex PTG Grease is specially designed lubricant with the following characteristics:
Long life
Improved tool efficiency
Extreme pressure and anti-wear
Low bleed solution
Excellent film strength
Heat resistant
Excellent thermal oxidation stability

APPLICATIONS: CITGO Lithoplex PTG Grease satisfies a wide range of industrial and home tool applications
lubricating bearings and gears. Consult owners manual for proper lubricant selection.

TYPICAL PROPERTIES:

CITGO LITHOPLEX PTG GREASE

NLGI Grade 2
Material Code 655572001
Worked 60 Penetration 265-295
Grease Type Lithium Complex
Color Amber
Texture Smooth, Tacky
Timken OK Lead, ASTM D2509, lb. 45
Four-Ball Weld, ASTM D2596, kgf 315
Four-Ball Wear, ASTM D2266, mm 0.54
Rust Protection, ASTM D1743 Pass
Greases

Copper Corrosion Protection, ASTM D4048 1a


Oil Separation, ASTM D1742 Nil
Viscosity: 40C, cSt 630

CITGO and Lithoplex are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

CC
I TI T
GGO OP P
eet rt or o
l el e
uummC C
oor pr p
oor ar a
t itoi o
n n 8 8
000
/ 2/ 2
448 8- 4- 46 68 84 4 HHo ou us st ot on n, , T Te ex xa as s MMa an nu uf af ac ct ut ur er ed d i ni n UUSSAA
C10245C 1 0 2 4 5

Click Here for Return to


PI Sheet Table of Contents
68
P R O D U C T I N F O R M A T I O N

C I T G O L I T H O P L E X
R E D M P G R E A S E S
Date 05/16

DESCRIPTION: CITGO Lithoplex Red MP Grease represents the latest technology in greases. It is a quality Lithium
Complex grease that is very versatile and provides long life with extreme pressure performance.
Recommended for a wide variety of applications including automotive chassis and wheel bearings,
industrial plain and rolling element bearings. Excellent performance over a wide temperature range.

QUALITIES: CITGO Lithoplex Red MP Grease is a multipurpose grease incorporating the following characteristics:
Excellent Work Stability Extremely stable lithium complex formula retains its consistency even in
the most severe service.
Extreme Pressure and Anti-Wear Protection Additives provide excellent extreme pressure and
anti-wear protection under severe conditions.
Corrosion Protection Resists corrosion, thereby extending equipment life. This is of particular
importance in applications where moisture is present.
Oxidation Resistant Formulation Contains oxidation inhibitors to extend grease life and protect
the application for longer periods.

APPLICATIONS: CITGO Lithoplex Red MP Grease is compatible with conventional lithium soap greases. It contains
extreme pressure (EP) additives to minimize wear in heavily loaded components. This grease satisfies
a wide range of industrial and automotive applications including bearings, ball joints and bushings.
CITGO Lithoplex Red MP Grease meets the ASTM D4950 requirements for Wheel Bearing Grease
Category GC and Chassis Grease Category LB. Labels display the NLGI Certification Mark GC-LB for
Automotive Wheel Bearing & Chassis Lubricant. Consult owners manual for proper lubricant selection.

CLASSIFICATION:

AUTOMOTIVE
WHEEL BEARING & CHASSIS
LUBRICANT

GC-LB

TYPICAL PROPERTIES:
CITGO LITHOPLEX RED MP GREASE

Product Lithoplex Red MP


NLGI Grade 2
Material Code 655387001

Greases
Worked 60 Penetration 265-295
Grease Type Lithium Complex
Color Red
Texture Smooth, Adhesive
Four-Ball Weld, ASTM D2596, kgf 315
Four-Ball Load Wear Index, ASTM D2596 43
Four-Ball Wear, ASTM D2266, mm 0.43
Rust Protection, ASTM D1743 Pass
Water Washout, 175F, ASTM D1264, % Loss 1.4
Dropping Point, ASTM D2265, F 500
NLGI Certified, ASTM D4950 GC-LB
Base Oil Viscosity: 40C, cSt 205

CITGO and Lithoplex are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10198C 1 0 1 9 8

Click Here for Return to


PI Sheet Table of Contents
69
P R O D U C T I N F O R M A T I O N

C I T G O L I T H O P L E X
R T G R E A S E S
Date 09/16

DESCRIPTION: The CITGO Lithoplex RT Greases represent the latest technology in greases. They are premium
quality lithium complex greases suited for a wide variety of industrial and automotive service
applications including chassis and wheel bearings. These extreme pressure greases are recommended
for use across several industries that include on-road, off-road and industrial applications.

QUALITIES: CITGO Lithoplex RT Greases are multipurpose greases incorporating the following characteristics:
Excellent Work Stability Extremely stable lithium complex formula retains its consistency even in
the most severe service.
Extreme Pressure and Anti-Wear Protection Additives provide excellent extreme pressure and
anti-wear protection under severe conditions.
Corrosion Protection Lithoplex greases resist corrosion, thereby extending equipment life. This is
of particular importance in applications where moisture is present.
Oxidation Resistant Formulation Lithoplex greases contain oxidation inhibitors to extend grease
life and protect the application for longer periods.

APPLICATIONS: CITGO Lithoplex RT Greases provide excellent performance in applications where good adhesion
and water resistance are critical. Their red color and tacky, moly-free formula make them ideal for
many problem applications. They are excellent for use in many industrial, agricultural, and automotive
applications. Consult owners manual for proper lubricant selection.

APPROVALS: Mack MG-C


AUTOMOTIVE
WHEEL BEARING & CHASSIS
LUBRICANT

GC-LB

TYPICAL PROPERTIES:
CITGO LITHOPLEX RT GREASES

Product Lithoplex RT1 Lithoplex RT2


NLGI Grade 1 2
Material Code 655343001 655344001
Worked 60 Penetration 310-340 265-295
Grease Type Lithium Complex Lithium Complex
Greases

Color Red Red


Texture Smooth, Adhesive, Buttery Smooth, Adhesive, Buttery
Four-Ball Weld, ASTM D 2596, kgf 250 250
Four-Ball Load Wear Index, ASTM D2596 48 48
Four-Ball Wear, ASTM D2266, mm 0.42 0.42
Rust Protection, ASTM D1743 Pass Pass
Water Washout, 175F, ASTM D1264, % Loss 5.3 2.0
Dropping Point, ASTM D2265, F 500 530
NLGI Certified, ASTM D4950 GC-LB GC-LB
Viscosity: 40C, cSt 500 500

CITGO and Lithoplex are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

CC
I TI G
TGO OP P
e tertor loel u
emu mC C
o ropr o
p roar tai toi n
o n 8 8
0000
/ 2/ 2
4488
- 4- 4
6688
4 4 HHo ou us st ot on n, , T Te ex xa as s MMa an nu uf af ac ct ut ur er ed d i ni n UUSSAA
C10193 C 1 0 1 9 3

Click Here for Return to


PI Sheet Table of Contents
70
P R O D U C T I N F O R M A T I O N

C I T G O L I T H O P L E X
S T G R E A S E S
Date 09/16

DESCRIPTION: CITGO Lithoplex ST Greases represent the latest technology in greases. They are high performance
Lithium Complex greases that are industry tested to withstand high shock loads, extreme pressures
and corrosive environments under a variety of mill conditions. Highly recommended for use in rolling
mills, work rolls, strip mills, drive u-joint and conveyer bearings. Lithoplex ST greases are also
recommended for use in other industrial equipment involving frequent contact with water.

QUALITIES: CITGO Lithoplex ST Greases are multipurpose greases incorporating the following characteristics:
Excellent Work Stability Extremely stable lithium complex formula retains its consistency even in
the most severe service.
Extreme Pressure and Anti-Wear Protection Additives provide excellent extreme pressure and
anti-wear protection under severe conditions.
Corrosion Protection Lithoplex greases resist corrosion, thereby extending equipment life. This is
of particular importance in applications where moisture is present.
Oxidation Resistant Formulation Lithoplex greases contain oxidation inhibitors to extend grease
life and protect the application for longer periods.

APPLICATIONS: CITGO Lithoplex ST Greases are high-temperature greases that provide exceptional water resistance
and stability that is critical in many primary and secondary mill applications. CITGO Lithoplex ST
Greases contain heavy base oils to provide for good load and wear protection. They provide excellent
protection against corrosion making CITGO Lithoplex ST Greases a good choice in many high
moisture environments. Consult owners manual for proper lubricant selection.

TYPICAL PROPERTIES:

CITGO LITHOPLEX ST GREASES

Product Lithoplex ST Lithoplex ST


NLGI Grade 1 2
Material Code 655366001 655367001
Worked 60 Penetration 310-340 265-295
Grease Type Lithium Complex Lithium Complex
Color Green Green
Texture Smooth, Adhesive Smooth, Adhesive

Greases
Four-Ball Weld, ASTM D2596, kgf 500 500
Four-Ball Load Wear Index, ASTM D2596 62 62
Four-Ball Wear, ASTM D2266, mm 0.42 0.40
Rust Protection, ASTM D1743 Pass Pass
Water Washout, 175F, ASTM D1264, % Loss 2.6 1.4
Timken OK Lead, ASTM D2509, lb. 65 65
USS Grease Mobility, 0F, gpm 27 13
Base Oil Viscosity: 40C, cSt 440 440

CITGO and Lithoplex are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

CC
I TI G
TGO OP P
e tertor loel u
emu mC C
o ropr o
p roar tai toi n
o n 8 8
0000
/ 2/ 2
4488
- 4- 4
6688
4 4 HHo ou us st ot on n, , T Te ex xa as s MMa an nu uf af ac ct ut ur er ed d i ni n UUSSAA
C10194 C 1 0 1 9 4

Click Here for Return to


PI Sheet Table of Contents
71
P R O D U C T I N F O R M A T I O N

C I T G O O V E R D R I V E H D G R E A S E
Date 09/16

DESCRIPTION: CITGO OverDrive HD Grease is designed for applications where outstanding protection is required.
With engine oil drain and relubrication intervals being extended, it is important to use a grease that
provides superior performance that will protect and stay put, even under a wide variety of conditions.
OverDrive HD is the ultimate grease for extended service applications.

QUALITIES: Corrosion Protection: OverDrive HD provides outstanding corrosion protection even in severe
conditions where salt water is present. OverDrive HD passes the Emcor Dynamic Corrosion Test
and the 5% Synthetic Sea Water Corrosion Test in addition to passing the standard ASTM D1743
Corrosion Test.
Extreme Pressure and Wear Protection: This product provides excellent protection in applications
where metal-to-metal friction and high loads exist. OverDrive HD offers an impressive Weld Point and
a high Timken OK Load.
Stays In Place: OverDrive HD is polymer fortified for improved adhesion.
Stability: This product has outstanding stability and resists softening even in conditions where water
contamination is present. OverDrive HD is highly resistant to water in conditions where rain or road
splash are present.
Grease Compatibility: OverDrive HD is formulated with a proprietary Lithium Complex thickener
system that is compatible with many other greases that are currently on the market.

APPLICATIONS: OverDrive HD Grease is an extremely versatile product that will hold up in situations where other
products fail. It is recommended for use in fifth wheels, spring pins, chassis lubrication, king pins,
and universal joints. OverDrive HD is recommended for applications where extreme stability, water
resistance, corrosion resistance, wear protection, and EP protection are required. OverDrive HD is not
recommended for use in disc brake wheel bearings.
Due to the heavy base oil viscosity and tenacious polymer, OverDrive HD will stay put and provide
excellent performance in many off-road construction and mining applications.
Consult owners manual for proper lubricant selection.
Greases

(Continued)

(Continued)

CCI TI TGGOO PPe et rt or ol el eu umm CCo or pr po or ar at it oi on n 8 80 00 0/ 2/ 24 48 8- 4


- 46 68 84 4 HHo ou us st ot on n, , TTe ex xa as s MMa an nu uf af ac ct ut ur e
r ed d i ni n UUSSAA
C10024C 1 0 0 2 4

Click Here for Return to


PI Sheet Table of Contents
72
P R O D U C T I N F O R M A T I O N

C I T G O O V E R D R I V E H D G R E A S E
(Continued)
D ate 09/16 - (Continued)

TYPICAL PROPERTIES:

CITGO OVERDRIVE HD GREASE

NLGI Grade 2

Material Code 655377001

Grease Type Lithium Complex


Color Green
Texture Smooth, Adhesive
Dropping Point, ASTM D2265, F 430
Worked-60 Penetration, ASTM D217 265-295
Rust Protection, ASTM D1743 Pass
Emcor, ASTM D6138 Pass
5% Synthetic Salt Water Corrosion, ASTM D5969 Pass
Water Washout, ASTM D1264, % Loss at 100F 1.4
Water Spray Off, ASTM D4049, % Loss 15.1
Timken OK Load, ASTM D2509, lb. 65
Four-Ball Wear, ASTM D2266, mm 0.4
Four-Ball Weld, ASTM D2596, kgf 500
USS Grease Mobility, 0F, gpm 12.5
Viscosity: 40C, cSt 540

CITGO and Overdrive HD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

Greases

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10024C 1 0 0 2 4

Click Here for Return to


PI Sheet Table of Contents
73
P R O D U C T I N F O R M A T I O N

C I T G O P R E M I U M L I T H I U M E P G R E A S E S
Date 09/16

DESCRIPTION: CITGO Premium Lithium EP Greases are premium quality, lithium-12 greases containing extreme
pressure, antiwear, antioxidant and anticorrosion additives. These greases are formulated with high
quality base stocks.

BENEFITS: The smooth, buttery texture of the grease in conjunction with high quality mineral oil provides
excellent pumpability over a wide temperature range. The extreme pressure agent provides the
protection required to handle severe conditions characterized by high shock loads. Oxidation and
corrosion inhibitors, and a high quality soap yield a product with excellent shear stability, load carrying
properties, corrosion resistance and oxidation stability. The combination of these properties makes
CITGO Premium Lithium EP Greases extremely versatile, thereby reducing the number of products
required. Substantial reductions in storage and handling costs are possible with these universal
products, while at the same time reducing potential of costly equipment failures associated with
misapplication of product.

The service temperature range of these greases is 5F to 250F continuous, with peak intermittent
temperatures up to 300F.

APPLICATIONS: CITGO Premium Lithium EP Greases are recommended for the lubrication of both journal and
anti-friction bearings in a wide variety of applications such as gear couplings, metallurgical industry
equipment and general industrial machinery.
CITGO Premium Lithium EP Greases are particularly adaptable for centralized lubrication systems
and for bulk handling systems, both for bulk truck delivery and portable containers.
They are approved under Chrysler Specification MS-3701 and Cincinnati Lamb P-64/P-72.
NLGI Grades 1 and 2 meet the ASTM D4950 requirements for Chassis Grease Category LB.
Consult owners manual for proper lubricant selection.
Greases

(Continued)

(Continued)

CC
I TI G
TGO OP P
e tertor loel ue m
u mC C
o ropr o
p roar tai toi n
o n 8 0
8 0 /02/ 4
284 -84- 6
4864
8 4 H H
ouo su tsot n
o ,n ,T T
ee xa
xa s s MM
aann
uuf af a
c tcut u
r er e
d d i ni n U U
SSAA
C10023 C 1 0 0 2 3

Click Here for Return to


PI Sheet Table of Contents
74
P R O D U C T I N F O R M A T I O N

C I T G O P R E M I U M L I T H I U M E P G R E A S E S
(Continued)
D ate 09/16 - (Continued)

APPROVALS: General Motors LS-2 Approval (EP 2, EP 1)


Patterson Pump Company Split Case Pumps (EP 2)
Falk Lifelign Gear Couplings Types G62 & G66 (EP 1, EP 0)
Cincinnati P-72 (EP 1)
Cincinnati P64 (EP 2)
NSF H2 (EP 2, Semi-Fluid)
NLGI Classification LB (EP 1, EP 2)

AUTOMOTIVE
CHASSIS
LUBRICANT

LB

TYPICAL PROPERTIES:

CITGO PREMIUM LITHIUM EP GREASES

Name Semi-Fluid EP-0 EP-1 EP-2

NLGI Grade 00-000 0 1 2

Material Code 655771001 655210001 655211001 655212001

Soap Lithium Lithium Lithium Lithium


Texture Buttery Buttery Buttery Buttery
Color Dark Amber Dark Amber Dark Amber Dark Amber
Dropping Point, ASTM D566, F (C) 350 (177) 375 (191)
Penetration at 77F, ASTM D217
Worked 60 strokes 425-455 355-385 310-340 265-295
Rust Prevention, ASTM D1743 Pass Pass Pass Pass
Copper Corrosion, ASTM D4048 1b 1b 1b 1b

Greases
Timken OK Load, ASTM D2509, lbs. 40 40 40 40
Four-Ball EP, Weld, ASTM D2596, kgf 250 250 250 250
Base Oil Viscosity: 40C, cSt 170 170 170 170

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10023C 1 0 0 2 3

Click Here for Return to


PI Sheet Table of Contents
75
P R O D U C T I N F O R M A T I O N

C I T G O R A I L R O A D C U R V E G R E A S E
Date 04/16

DESCRIPTION: CITGO Summer Railroad Curve Grease No. 1 and CITGO Winter Railroad Curve Grease No. 0
are Anhydrous Calcium thickened greases formulated with graphite to provide outstanding
wear resistance.

QUALITIES: Excellent Flow Characteristics: CITGO Railroad Curve Grease has a smooth buttery texture
that provides exceptional spray characteristics. CITGO Railroad Curve Grease sprays through the
applicator nozzle in a consistent spray to coat the rail sides with a highly wear resistant film. The
smooth consistency enables the product to flow through the applicator without clogging and without
flow interruptions.
Outstanding Wear Protection: This product contains graphite to provide outstanding wear protection
to the rail curves.
Water Resistance: CITGO Railroad Curve Grease is extremely resistant to water. This grease
adheres to the rail, even in humid and rainy environments.

APPLICATIONS: CITGO offers two version of this product. CITGO Summer Railroad Curve Grease No. 1 stays in place
during the harsh summer weather and CITGO Winter Railroad Grease No. 0 provides improved flow
during the colder winter conditions. Both provide outstanding protection to the application.
Consult owners manual for proper lubricant selection.

TYPICAL PROPERTIES:

CITGO RAILROAD CURVE GREASE

SUMMER RAILROAD WINTER RAILROAD


CURVE GREASE NO. 1 CURVE GREASE NO. 0

NLGI Grade 1 0

Material Code 655532001 655531001

Worked-60 Penetration 310-340 355-385


Grease Type Anhydrous Calcium Anhydrous Calcium
Greases

Color Gray Gray


Texture Smooth, Buttery Smooth, Buttery
Solid Additives Graphite Graphite
Pour Point, F -29 -29
Base Oil Viscosity: 40C, cSt 20 20

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

CCI TI TGGOO PPe et rt or ol el eu umm CCo or pr po or ar at it oi on n 8 80 00 0/ 2/ 24 48 8- 4- 46 68 84 4 HHo ou us st ot on n, , T Te ex xa as s MMa an nu uf af ac ct ut ur er ed d i ni n UUSSAA


C10152C 1 0 1 5 2

Click Here for Return to


PI Sheet Table of Contents
76
P R O D U C T I N F O R M A T I O N

C I T G O S U P E R G A R D M A R I N E P L U S
G R E A S E
Date 09/16

DESCRIPTION: CITGO SUPERGARD Marine Plus Grease is a smooth but tacky blue grease with outstanding water
resistance. It is designed to provide excellent lubrication for greased chassis points and other
wet-environment applications.

QUALITIES: SUPERGARD Marine Plus Grease combines an anhydrous calcium thickener, special polymer, and
proprietary additive system to ensure superior performance in freshwater marine applications.
Excellent water resistance
Includes rust, corrosion and wear protection
Extreme Pressure (EP), shock load and fretting wear (vibration) protection
Compatible with commonly used lithium, lithium complex and anhydrous calcium based greases
Polymer fortified for very good metal adhesion

APPLICATIONS: Recommended for marine applications including greased chassis points, boat lifts, etc. Lubricates
well over a wide temperature range up to 250 F. It is not recommended for automotive disc brake
wheel bearings. CITGO SUPERGARD Marine Plus Grease is also an excellent choice in non-marine
applications where a general purpose EP grease with outstanding water resistance is desired, such
as water pumps, fifth wheels and other equipment operating in wet conditions.
Consult owners manual for proper lubricant selection.

TYPICAL PROPERTIES:

CITGO SUPERGARD MARINE PLUS GREASE

NLGI Grade 2

Material Code 655707001

Thickener Anhydrous Calcium


Texture Smooth, Adhesive
Color, Observed Blue
Worked 60 Penetration, ASTM D217 265-295
Dropping Point, ASTM D566, F (C) 290 (143)
Oil Separation, ASTM D1742, % loss 1

Greases
Rust Prevention, ASTM D1743, rating Pass
Oxidation Stability, ASTM D942, psi drop 5 @ 100 hours
Timken OK Load, ASTM D2509, lb. 50
Four-Ball Wear, ASTM D2266, mm 0.6
Approximate Temperature Range, F (C) 0 to 250 (-18 to 121)
Viscosity: 40C, cSt 1080

CITGO and SUPERGARD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

CC
I TI T
GGOO P P
eet rt or o
l el e
uumm C C
o or pr po or ar at itoi on n 8 80 0 0/ 2/ 24 48 8- 4- 46 68 84 4 HHo ou us st ot on n, , T Te ex xa as s MMa an nu uf af ac ct ut ur er ed d i ni n UUSSAA
C10026C 1 0 0 2 6

Click Here for Return to


PI Sheet Table of Contents
77
P R O D U C T I N F O R M A T I O N

C I T G O S Y N D U R A N C E P R E M I U M
S Y N T H E T I C 4 6 0 G R E A S E # 0 0 R E D
Date 05/16

DESCRIPTION: CITGO SynDurance Premium Synthetic 460 Grease #00 Red represents the latest in technology
using synthetic PAOs in greases and is recommended for extended service applications; reducing
operating costs and extending component life. It is designed as a high performance synthetic grease
specifically for trailer wheel-ends operating under a wide range of conditions. It can also be utilized in
industrial gear cases where operating temperatures are high, where conventional semi-fluid grease
will not produce adequate lubricant life. Specially formulated to perform in demanding conditions
of high and low temperatures, this grease offers the potential for energy savings and reduction in
operating temperatures.

FEATURES: High temperature stability


Low temperature lubrication (lower starting torque)
Excellent anti-oxidation resistance
Anti-wear protection
Excellent low friction properties
Enhanced extreme pressure load carrying capacity
Exceptional corrosion protection

APPLICATIONS: CITGO SynDurance Premium Synthetic 460 Grease #00 Red is compatible with most lithium and
lithium complex greases. It is recommended for use in trailer axles, implement gear boxes,
motorized wheelchair gear boxes and motorized conveyor gear boxes. It flows smoothly and evenly
at temperature extremes from 40 C up to 190 C with appropriate re-lubrication intervals.
Consult owners manual for proper lubricant selection.

APPROVALS: Stemco Heavy Duty Axles

TYPICAL PROPERTIES:

CITGO SYNDURANCE PREMIUM SYNTHETIC 460 GREASE #00 RED


NLGI Grade 00
Material Code 655544001
Greases

Thickener Lithium Complex


Texture Smooth
Color, Observed Red
Worked 60 Penetration, ASTM D217 400-430
Rust Prevention, ASTM D1743, rating Pass
Emcor Corrosion Protection, ASTM D6138 0 (Pass)
Sea Water Rust Prevention, ASTM D5969 Pass
Four-Ball Wear, ASTM D2266, mm 0.41
Four-Ball EP Weld Point, ASTM D2596, kgf 315
Four-Ball Load Wear Index, ASTM D2596, kgf 59
Low Temperature Torque, ASTM D4693, N-m 2
Base Oil Viscosity: 40C, cSt 460

CITGO and Syndurance are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

CCI TI TGGOO PPe et rt or ol el eu umm CCo or pr po or ar at it oi on n 8 80 00 0/ 2/ 24 48 8- 4- 46 68 84 4 HHo ou us st ot on n, , T Te ex xa as s MMa an nu uf af ac ct ut ur er ed d i ni n UUSSAA


C10226C 1 0 2 2 6

Click Here for Return to


PI Sheet Table of Contents
78
P R O D U C T I N F O R M A T I O N

C I T G O S Y N D U R A N C E P R E M I U M
S Y N T H E T I C 4 6 0 G R E A S E S
Date 09/16

DESCRIPTION: The CITGO SynDurance product line represents the latest in technology using synthetic PAOs
in greases and is recommended for extended service applications; reducing operating costs and
extending component life. The CITGO SynDurance Premium Synthetic 460 Greases are available in
two NLGI Grades: #00 and #2.
The CITGO SynDurance Premium Synthetic 460 Grease #2 has superior water washout and spray off
resistance, and is designed to prevent corrosion in fresh and sea water conditions. This is particularly
important when exposed to corrosive anti-icing agents and water spray conditions.
The CITGO SynDurance Premium Synthetic 460 Grease #00 is specifically engineered for trailer
wheel-ends operating under a wide range of conditions. It can also be utilized in industrial gear
boxes where operating temperatures are high, where conventional semi-fluid grease will not produce
adequate lubricant life. Both NLGI Grades offer performance in demanding conditions of high and low
temperatures, and offer the potential for energy savings and reduction in operating temperatures.
Fully additized to provide superior extreme pressure (EP) and anti-wear characteristics, it is inhibited
to resist corrosion and oxidation.

APPLICATIONS: The CITGO SynDurance Premium Synthetic 460 Greases are compatible with conventional lithium
and lithium complex greases. They contain extreme pressure (EP) additives and provide superior
corrosion protection. Consult owners manual for proper lubricant selection.
The CITGO SynDurance Premium Synthetic 460 Grease #2 satisfies a wide range of industrial
applications including:
Industrial Gear Boxes
Paper Mills
Industrial Bearings
Heavy Duty Commercial On Road Fleets
Fifth Wheels Pins and Bushings Slack Adjusters
Kingpins Trailer Landing Gear Boxes
Heavy Duty Off Road
Dozers Forklifts Cranes
Scrapers Excavators Loaders
Backhoes Compactors Paving
Cold Planers Forest Machines Articulated Trucks
Agriculture

Greases
Implements Tractors Combines
Tillage Hay Balers Mowers
Planting And Seeding Harvesting Skid Steers
Sprayers And Spreaders Utility Vehicles
Automotive Applications
Wheel Bearings** Chassis**
**The CITGO SynDurance Premium Synthetic 460 Grease #2 meets the NLGI Service Classification of GC-LB and displays
the NLGI Certification Mark as an Automotive Wheel Bearing and Chassis Lubricant
The CITGO SynDurance Premium Synthetic 460 Grease #00 is recommended for use in trailer wheel ends, implement
gear boxes, motorized wheelchair gear boxes as well as motorized conveyor gear boxes. It flows smoothly and evenly at
temperature extremes from -40C up to 190C with appropriate re-lubrication intervals.

(Continued)
(Continued)

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10179C 1 0 1 7 9

Click Here for Return to


PI Sheet Table of Contents
79
P R O D U C T I N F O R M A T I O N

C I T G O S Y N D U R A N C E P R E M I U M
S Y N T H E T I C 4 6 0 G R E A S E S
(Continued)
D ate 09/16 - (Continued)

APPROVALS: Stemco Heavy Duty Axles #00


SAF Holland LSZ Kingpin #2

AUTOMOTIVE
WHEEL BEARING & CHASSIS
LUBRICANT

GC-LB

TYPICAL PROPERTIES:

CITGO SYNDURANCE PREMIUM SYNTHETIC 460 GREASES


NLGI Grade 00 2
Material Code 655424001 655427001
Thickener Lithium Complex Lithium Complex
Texture Smooth, Adhesive Smooth, Adhesive
Dropping Point, ASTM D2265 500
Color, Observed Green Green
Worked 60 Penetration, ASTM D217 400-430 265-295
Rust Prevention Pass Pass
Emcor Corrosion Protection Pass Pass
5% Synthetic Sea Water Corrosion Pass Pass
Water Washout, ASTM D1264 2% Loss
Water Spray-off, ASTM D4049 <15% Loss
Low Temperature Torque, ASTM D4693 2 N-m 3 N-m
4 Ball EP Weld Point, ASTM D2596 315 620
USS Mobility @ -10F 28 gpm
NLGI Classification GC-LB
Base Oil Viscosity: 40C, cSt 460 460

CITGO and SynDurance are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.
Greases

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10179C 1 0 1 7 9

Click Here for Return to


PI Sheet Table of Contents
80
P R O D U C T I N F O R M A T I O N

C I T G O S Y N D U R A N C E S T
S Y N T H E T I C G R E A S E S
Date 09/16

DESCRIPTION: CITGO SynDurance ST Synthetic Greases are scientifically engineered for a wide variety of heavy
duty applications. These high performance greases are formulated with a premium quality lithium
complex thickener system which is combined with the exceptional features of synthetic base oils to
significantly increase bearing life and equipment reliability. CITGO SynDurance ST Synthetic Greases
are designed to provide excellent wear control, EP performance, and water resistance critical for a
variety of applications. The corrosion protection available with these greases goes above and beyond
in applications where corrosive environments are an everyday occurrence. CITGO SynDurance ST
Synthetic Greases deliver superior protection in heavily loaded industrial, mining and construction
applications by providing low temperature pumpability and low starting and running torque, resulting in
reduction of operating temperatures and energy savings.

FEATURES: Premium quality lithium complex soap thickener


Outstanding low temperature performance and pumpability
Superior water resistance
Excellent high-temperature oxidation resistance

APPLICATIONS: Heavy Industrial


Mining
Steel Mills
Construction

DESIGNED TO PERFORM AND PROTECT:


CITGO SynDurance ST Synthetic Greases are designed to protect against wear which increases
equipment life. These greases have an impressive 500 kgf four-ball weld point which is an indicator of
the outstanding extreme pressure protection. CITGO SynDurance ST Synthetic Greases provide twice
the load protection compared to many leading competitor greases. Consult your owners manual for
proper lubricant selection.

4 Ball Weld
load kgf
load (ASTM
passing D-2596
weight kg test method)
(ASTM D-2596 test method)
Twice the load

Compe66ve SHC

Greases
SynDurance ST

0 100 200 300 400 500

Higher is better

(Continued)
(Continued)

CC
I TI T
GGO OP P
e tertor loel u
emu mC C
o ropr p
oor ar a
t i toi o
n n 8 8
0000
/ 2/ 2
4488
- 4- 4
6 68 84 4 HHo ou us st ot on n, , T Te ex xa as s MMa an nu uf af ac ct ut ur er ed d i ni n UUSSAA
C10209 C 1 0 2 0 9

Click Here for Return to


PI Sheet Table of Contents
81
P R O D U C T I N F O R M A T I O N

C I T G O S Y N D U R A N C E S T
S Y N T H E T I C G R E A S E S
(Continued)
D ate 09/16 - (Continued)

TYPICAL PROPERTIES:

CITGO SYNDURANCE ST SYNTHETIC GREASES

Material Code 655441001 655442001 655451001 655452001


ISO VIS Grade 220 220 460 460
NLGI Consistency Number 1 2 1 2
Color, Observed Red Red Red Red
Worked 60 Penetration,
ASTM D217 310-340 265-295 310-340 265-295
Dropping Point,
ASTM D2265 F (C) >500 (260) >500 (260) >500 (260) >500 (260)
Rust Prevention,
ASTM D1743, rating Pass Pass Pass Pass
Water Washout,
ASTM D1264, % Loss 2.3 1.8 2.8 1.9
4 Ball EP Weld Point,
ASTM D2596, kgf 500 500 500 500
4 Ball Load Wear Index,
ASTM D2596, kgf 62 62 62 62
Base Oil Viscosity: 40C, cSt 220 220 460 460

CITGO and SynDurance are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.
Greases

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10209C 1 0 2 0 9

Click Here for Return to


PI Sheet Table of Contents
82
P R O D U C T I N F O R M A T I O N

C I T G O U L T R A L I F E
C S E P 5 M G R E A S E
Date 09/16

DESCRIPTION: CITGO UltraLife CSEP 5M Grease is an advanced calcium sulfonate complex grease engineered
to provide outstanding EP (Extreme Pressure) performance, and superior corrosion protection in a
variety of high temperature applications.
It is specially formulated to protect even the most heavily loaded joints against galling, wear and
corrosion, under dry or wet working conditions.
CITGO UltraLife CSEP 5M Grease contains 5% molybdenum disulfide for added protection and
longer service life in severe applications. The exceptional EP properties go beyond the norm,
providing that extra protection needed in construction, mining, paper mills and other heavy industries.
It has been designed to maximize component life and reduce re-lubrication frequency.
The Four Ball EP Weld Point Test is a measure of how well a grease will stand up to the shock
loading and direct metal-to-metal contact typically found in off-highway/construction/mining
applications. As seen in the graph below, CITGO UltraLife CSEP 5M Grease outperforms the
competition while matching the performance set by the leading OEM branded grease.
Four Ball Weld
Load kgf (ASTM D2596 Test Method)

Competitor A

Competitor B

Leading OEM Brand

UltraLife CSEP 5M

0 100 200 300 400 500 600 700


Exceptional water resistance is very important to maintaining lubrication to the bearing or bushing.
CITGO UltraLife CSEP 5M Grease resists water washout, water spray off and softening, plus prevents
corrosion in the presence of water in applications exposed to both fresh and salt water.

FEATURES Adhesive and tacky, stays in place

Greases
Superior water resistance
Exceptional corrosion protection
Minimizes abrasive wear
Withstands shock loads, impact resistant

APPLICATIONS: CITGO UltraLife CSEP 5M Grease provides excellent protection in severe applications such as
construction, mining, aggregate mines, marine, forestry, pulp and paper mills, steel mills, and
conveyor systems.

Consult owners manual for proper lubricant selection.

(Continued)
(Continued)

CCI TI TGGOO PPe et rt or ol el eu umm CCo or pr po or ar at it oi on n 8 80 00 0/ 2/ 24 48 8- 4- 46 68 84 4 HHo ou us st ot on n, , T Te ex xa as s MMa an nu uf af ac ct ut ur er ed d i ni n UUSSAA


C10214C 1 0 2 1 4

Click Here for Return to


PI Sheet Table of Contents
83
P R O D U C T I N F O R M A T I O N

C I T G O U L T R A L I F E
C S E P 5 M G R E A S E
(Continued)
D ate 09/16 - (Continued)

TYPICAL PROPERTIES:

CITGO ULTRALIFE CSEP 5M GREASE

NLGI Grade 2

Material Code 655542001

Thickener Calcium Sulfonate


% Molybdenum Sulfide 5
Dropping Point, ASTM D2265, F (C) >500 (260)
Rust Prevention, ASTM D1743, rating Pass
Four Ball EP Weld Point, ASTM D2596, kgf 620
Water Washout, ASTM D1264, % Loss <2
Salt Fog Test, Hours 1,000 +
Operating Range, F (C) -25 to 300 (-32 to 150)
USS Mobility @ 0F 20 g/m
Base Oil Viscosity: 40C, cSt 150

CITGO and UltraLife are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.
Greases

CITGC OI T
PG e tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10214C 1 0 2 1 4

Click Here for Return to


PI Sheet Table of Contents
84
P R O D U C T I N F O R M A T I O N

C I T G O A W 6 8 M I N I N G H Y D R A U L I C O I L
Date 06/15

DESCRIPTION: CITGO AW 68 Mining Hydraulic Oil is an anti-wear hydraulic and circulating oil.

QUALITIES: CITGO CITGO AW 68 Mining Hydraulic Oil offers:


Wear Protection
Rust and Corrosion Protection
Anti Foam Performance
High Viscosity Index

APPLICATIONS: CITGO AW 68 Mining Hydraulic Oil is recommended for service in surface and underground mining
equipment.
CITGO AW 68 Mining Hydraulic Oil is also recommended for industrial applications where an anti-
wear, rust and oxidation inhibited oil is desired.

TYPICAL PROPERTIES:
CITGO AW 68 MINING HYDRAULIC OIL
ISO Grade 68
Material Code 633592001
Viscosity, ASTM D445
cSt at 40C 71.8
cSt at 100C 10.7
Viscosity Index, ASTM D 2270 130
Pour Point, ASTM D 97, F (C) -31 (-35)

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

Industrial Fluids

CITGO PG
CIT e tOr oPl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10207C 1 0 2 0 7

Click Here for Return to


PI Sheet Table of Contents
85
P R O D U C T I N F O R M A T I O N

C I T G O A / W H Y D R A U L I C O I L S
Date 06/15

DESCRIPTION: CITGO A/W Hydraulic Oils are superior anti-wear hydraulic and circulating fluids specially formulated
with thermally stable additives. These oils offer outstanding resistance to sludge formation, chemical
stability, and anti-wear protection.
QUALITIES: CITGO A/W Hydraulic Oils are designed for service in high-pressure, high-output industrial hydraulic
circuits. CITGO A/W Hydraulic Oils:
Utilize thermally stable zinc-type additives, helping to protect heat-related sludge formation in
sensitive electro-hydraulic servos. These oils are recommended for use in N/C machine tools and
other high-output equipment where sustained heat is prevalent.
Inhibited against rusting in both fresh and sea water and pass both A and B Sequences of the
ASTM D 665 Turbine Oil Rust Test.
Approved against stringent performance requirements including Eaton Brochure 03-401-2010
(formerly Vickers 2950-S, I-286-S), Fives Cincinnati P-68, P-69 and P-70 and Parker Denison
HF-O Revision J.
Resist foaming and will not foster abnormal air entrainment in properly designed hydraulic circuits.
Readily separate water permitting contaminating water to be drained from the sump.
APPLICATIONS: CITGO A/W Hydraulic Oils are recommended for service in vane, piston, and gear pumps when
used in accordance with equipment manufacturers recommendations. Designed to provide excellent
service life to these pumps as well as to other circuit components such as motors and servos.
CITGO A/W Hydraulic Oils are also recommended for use as a gear and bearing lubricant in industrial
applications where rust and oxidation inhibited oils are required.

TYPICAL PROPERTIES:
CITGO A/W HYDRAULIC OILS
Grade 32 46 68
Material Code 633491001 633492001 633493001
Gravity, ASTM D 4052, API 32.6 31.2 30.8
Density, lb/gal 7.18 7.24 7.26
Flash Point, COC, ASTM D 92, F (C) 417 (214) 446 (230) 468 (242)
Viscosity, ASTM D445
cSt at 40C 32.3 46.6 68
cSt at 100C 5.59 6.96 9.0
Viscosity Index 111 106 107
Pour Point, ASTM D 97, F (C) -27 (-33) -22 (-30) -17 (-27)
Color, ASTM D 1500 L0.5 L0.5 L0.5
Water Separability, ASTM D 1401 40-40-0 40-40-0 40-40-0
Oxidation Test, ASTM D 943, Hrs. >3000 >3000 >3000
Rust Test, ASTM D 665 A, B Pass Pass Pass
Eaton Brochure
03-401-2010 Yes Yes Yes
Meets Parker Denison HF-O Requirement Yes Yes Yes
Meets Fives Cincinnati Requirement P-68 P-70 P-69
AFNOR NF E 48-603 HM32 HM46 HM68
Industrial Fluids

ISO VG No. 32 46 68
CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

C IP
CITGO TeGtOr o P
l eeut m
r o lCe ou rmp oCr o
a rt ipoonr at i 8o 0n 0 / 2 84 08 0- 4
/ 264884- 4 6 H
8o4 u s tHo on u, sTt o
en , sT e xM
xa a sa nu fMa ac dt ue r ei nd Ui nS AU S A
C10029C 1 0 0 2 9

Click Here for Return to


PI Sheet Table of Contents
86
P R O D U C T I N F O R M A T I O N

C I T G O A / W H Y D R A U L I C O I L
S U P E R M V
Date 09/15

DESCRIPTION: CITGO A/W Hydraulic Oil Super MV is a multi-grade high-efficiency hydraulic oil formulated to provide
excellent oxidation stability, rust protection, foam resistance and wide temperature performance.

QUALITIES: Improved overall hydraulic efficiency.


A special seal conditioner assists in minimizing minor leaks and providing longer seal life.
Pour point and Brookfield viscosity demonstrate excellent low temperature performance.
These oils exhibit excellent water separation.
Highly shear stable formula.

APPLICATIONS: CITGO A/W Hydraulic Oil Super MV is designed to exceed the performance requirements of:
ASTM D6158 HV
Parker Denisou HF-O (Reyisiou J)
Eaton Brochure 03-401-2010
ISO 11158 HV
DIN 51524-3
They are especially recommended for hydraulic systems operating in wide temperature ranges and can
remain in service without seasonal-based oil changes.

TYPICAL PROPERTIES:

CITGO A/W HYDRAULIC OIL SUPER MV

Material Code 633935001

Gravity, ASTM D 4052, API 31.7


Flash Point, ASTM D 92, F (C) 385 (196)
Viscosity, ASTM D 445, cSt, at 40C 35.6
Viscosity, ASTM D 445, cSt, at 100C 7.9
Viscosity, ASTM D 2983, cP at -40F 19,800
Viscosity, ASTM D 2983, cP at -23
Viscosity Index, ASTM D 2270 202
Pour Point, ASTM D 97, F (C) -54 (-48)
Color, ASTM D 1500 L0.5
Copper Corrosion, ASTM D 130 1A
Four Ball Wear, ASTM D 4172, mm Scar at 40 kg 0.4
Water Separation, ASTM D 1401 @ 130F (54C) Pass
Foam Tendency, ASTM D 892 Pass
Rust Protection, Part A & B, ASTM D 665 Pass

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.
Industrial Fluids

CIT
CITGO PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10037C 1 0 0 3 7

Click Here for Return to


PI Sheet Table of Contents
87
P R O D U C T I N F O R M A T I O N

C I T G O A M P L E X
O I L S
Date 06/15

DESCRIPTION: CITGO Amplex Oils are high quality, medium viscosity index oils for use in general purpose lubrication
applications.

QUALITITIES: CITGO Amplex Oils are made from highly refined medium viscosity index base stocks with low pour
points.
These oils exhibit a mild natural dispersant action, good seal swell and excellent solvency.

APPLICATIONS: CITGO Amplex Oils are recommended as general purpose machinery lubricants, especially for use as
a mild service circulating oil and lubrication of plain bearings where oil is applied by hand methods.
CITGO Amplex Oil 22 has a very low pour point which makes it suitable for lubrication of certain
industrial equipment where low ambient temperatures may be encountered.

TYPICAL PROPERTIES:

CITGO AMPLEX OILS

Grade 22 58 100 150


Material Code 638033001 638036001 638040001 638041001
Gravity, ASTM D 4052, API 25.0 23.0 22.5 22.0
Density, lb/gal at 60F 7.5 7.6 7.6 7.7
Flash Point, COC,
ASTM D 92, F (C) 330 (166) 380 (193) 390 (199) 412 (211)
Viscosity:
ASTM D 445, cSt at 40C 20 59 94 141
ASTM D 445, cSt at 100C 3.7 6.7 8.8 11
ASTM D 2161, SUS at 100F 106 309 498 754
ASTM D 2161, SUS at 210F 38 49 56 64
Viscosity Index, ASTM D 2270 43 47 49 42
Pour Point, ASTM D 97, F (C) -40 (-40) -20 (-29) -20 (-29) -15 (-26)
Color, ASTM D 1500 L1.0 1.0 1.5 1.5

CITGO and Amplex are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.
Industrial Fluids

CITGO PG
CIT e tOr oPl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10028C 1 0 0 2 8

Click Here for Return to


PI Sheet Table of Contents
88
P R O D U C T I N F O R M A T I O N

C I T G O C Y L I N D E R O I L S
Date 06/15

DESCRIPTION: CITGO Cylinder Oils are compounded lubricants designed for use in steam cylinders, gas compressor
cylinders, and worm gear drives.

QUALITIES: CITGO Cylinder Oils are formulated with high viscosity index base stocks, and compounded for
improved metal adhesion and lubricity.
Because of their special formulation, these oils provide excellent lubrication even when in contact with
steam at low-to-medium pressures.

APPLICATIONS: CITGO Cylinder Oils are recommended for the lubrication of steam cylinders over a wide range of
operating conditions and steam quality.
All grades are recommended as lubricants for natural gas compressors having separate cylinder
lubrication, especially recommended where high moisture natual gas is processed.
Because of their lubricity, all grades may be utilized in certain types of worm gear drives.

TYPICAL PROPERTIES:

CITGO CYLINDER OILS

Grade 150-5 220-5 400-5 680-7

Material Code 635013001 635015001 635017001 635023001

Gravity, ASTM D 4052, API 28.8 28.0 27.1 22.1


Density, lb/gal at 60F 7.38 7.41 7.43 7.67
Flash Point, COC, ASTM D 92, F (C) 493 (256) 525 (274) 585 (307) 555 (290)
Viscosity, ASTM D 445, cSt at 40C 149 216 390 652
cSt at 100C 15 19 28 40
ASTM D 2161, SUS at 100F 750 2080 3392
SUS at 210F 75 95 137 193
Viscosity Index, ASTM D 2270 103 100 98 102
Pour Point, ASTM D 97, F (C) 0 (-18) 16 (-9) 5 (-15) 5 (-15)
Color, ASTM D 1500 L3 L3 7 D8
Fatty Oil, % 5 5 5 7

AGMA Grade 4 5 7 Comp. 8 Comp.


ISO VG No. 150 220 680

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.
Industrial Fluids

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10045C 1 0 0 4 5

Click Here for Return to


PI Sheet Table of Contents
89
P R O D U C T I N F O R M A T I O N

C I T G O E L O 3 2
Date 06/15

DESCRIPTION: CITGO ELO 32 is a superior antiwear hydraulic and circulating fluid specially formulated with high
quality base stocks and improved thermally stable additives. This oil offers outstanding resistance to
sludge formation, is chemically stable and exhibits excellent antiwear protection.

QUALITIES: CITGO ELO 32 offers excellent service in high-pressure, high-output industrial hydraulic circuits.
Utilizes thermally stable zinc-type additives. This helps prevent the formation of heat-related
sludging in sensitive electro-hydraulic servos associated with conventional zinc-type oils. This
oil is wholly suitable for N/C machine tools and other high-output equipment where sustained
heat is prevalent.
Exhibits superior hydrolytic stability and will not contribute to the formation of metal-etching acids
or corrosive reactants.
Inhibited against rusting in both fresh and sea water and passes both A and B Sequences of the
ASTM D 665 Turbine Oil Rust Test.
Offers antiwear protection to pumps, motors, valves and other hydraulic circuit components. It
is approved against stringent performance requirements including Fives Cincinnati P-68, Parker
Denison HF-O, and Eaton Brochure 03-401-2010 (formerly M-2950-S and I-286-S).
Resists foaming and will not foster abnormal air entrainment in properly designed hydraulic circuits.
This oil also readily separates water permitting contaminating water to be drained from the sump.

APPLICATIONS: CITGO ELO 32 is recommended for service in vane, piston and gear pumps when used in
accordance with the manufacturers recommendations. This oil is designed to provide maximum
service life to these pumps as well as to other circuit components such as motors and servos.

(Continued)
Industrial Fluids

(Continued)

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10177C 1 0 1 7 7

Click Here for Return to


PI Sheet Table of Contents
90
P R O D U C T I N F O R M A T I O N

C I T G O E L O 3 2
(Continued)
D ate 06/15 - (Continued)

TYPICAL PROPERTIES:

CITGO ELO 32

GRADE 32

Material Code 632610001

Gravity, ASTM D 4052, API 32.6


Density, lb/gal 7.18
Flash Point, ASTM D 92, COC,F (C) 417 (214)
Viscosity, cSt at 40C 32.3
cSt at 100C 5.59
Viscosity Index 111
Pour Point, ASTM D 97, F (C) -30 (-34)
Color, ASTM D 1500 0.5
Water Separability, ASTM D 1401(1) 40-40-0
Oxidation Test, ASTM D 943, Hrs. >6,000
Rust Test, ASTM D 665 A, B(2) Pass
Copper Corrosion, D130, 3 hrs @ 100C 1A (Pass)
Foam Test, D892, Sequence 1, II, III Pass
Meets Eaton Brochure 03-401-2010 Requirements Yes
(formerly Vickers M-2950-S and I-286-S)
Meets Parker Denison HF-O (Revision J) Requirement Yes
Meets Fives Cincinnati Requirement P-68
AF NOR NF E 48-603 HM32
ISO VG No. 32

Notes: (1) 30 minutes max. separation time to 3ml emulsion.

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

Industrial Fluids

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10177C 1 0 1 7 7

Click Here for Return to


PI Sheet Table of Contents
91
P R O D U C T I N F O R M A T I O N

C I T G O F R W G - 4 0 X D
H Y D R A U L I C F L U I D
Date 06/15

DESCRIPTION: CITGO FR WG-40XD Hydraulic Fluid is a premium water-glycol type fire-resistant fluid designed to
provide excellent performance in hydraulic systems requiring fire resistance such as those found in
steel industry operations.

QUALITIES: CITGO FR WG-40XD Hydraulic Fluid is specially formulated to provide excellent service over a wide
range of operating conditions. It is particularly effective in demanding steel industry applications.
CITGO FR WG-40XD is formulated to provide:
Factory Mutual approved
Excellent fire resistance, no flash or fire point
Meets U.S. Steel Requirement No.171
Meets ASTM D2882 Sperry-Vickers V104C pump test
Enhanced lubricity, with wear, foam and corrosion protection
Excellent heat transfer properties

APPLICATIONS: CITGO FR WG-40XD Hydraulic Fluid may be used in most types of hydraulic systems requiring fire
resistance. Applications include steel mills, die casting and power transmission plants. CITGO FR
WG-40XD is recommended in fire resistant hydraulic systems operating with Eaton/Vickers, Parker/
Denison, Rexroth and other vane and piston pumps.
Maintenance of viscosity of CITGO FR WG-40XD is recommended as follows:

CITGO FR WG-40XD WATER ADJUSTMENT CHART


VISCOSITY VISCOSITY PERCENT GALLONS OF WATER NEEDED
(SUS) (cSt) WATER IN PER 100 GALLONS OF
BRIX AT 100F AT 40C UNADJUSTED FLUID UNADJUSTED FLUID IN SYSTEM CONDITION
50.0 412 82.5 28.4 18.1
49.5 394 78.8 29.3 17.1
49.0 377 75.0 30.2 15.8
48.5 358 71.2 31.2 14.4
48.0 342 67.9 32.2 13.0
S
47.5 324 64.3 33.3 11.5 E
47.0 309 61.3 34.2 10.2 V
46.5 294 58.4 35.3 8.8 E
46.0 280 55.6 36.5 7.3 R
45.5 266 52.7 37.7 5.8 E
M
45.0 253 50.1 38.8 4.5 O
L L
44.5 241 47.7 40.0 3.0 D
E E
44.0 228 45.0 41.5 1.5 E
N V V
R
43.5 217 43.0 42.7 0.0 O E E
A
43.0 207 41.0 43.9 0.0 R L L
M T
42.5 197 38.9 44.5 0.0 A E
L
42.0 187 37.0 45.5 0.0
41.5 177 34.5 - Excess Water
40.0 153 30.0 - Excess Water
Industrial Fluids

(Continued)
(Continued)

CITGO PG
CIT e tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10206C 1 0 2 0 6

Click Here for Return to


PI Sheet Table of Contents
92
P R O D U C T I N F O R M A T I O N

C I T G O F R W G - 4 0 X D
H Y D R A U L I C F L U I D
D ate 06/15 - (Continued)
(Continued)

TYPICAL PROPERTIES:

CITGO FR WG-40XD HYDRAULIC FLUID

Material Code 648326001

Specific Gravity, ASTM D 129, at 60/60F 1.0817


Density, lb/gal 9.018
Flash Point, COC, ASTM D 92, F (C) None
Viscosity, D 2161, SUS at 100F 200
Viscosity Index, ASTM D 2270 180
Pour Point, ASTM D 97, F (C) -40 (-40)
Color Pink
pH 9.5
Reserve Alkalinity, ASTM D 1121(1) 19.0
Four Ball Wear Test, ASTM D 4172,
40 Kg load, Scar Dia., mm(2) 0.66
Foam Inhibitor Yes

Notes: (1) Milliliters of 0.1N hydrochloric acid solution required to neutralize 10 milliliters of fluid to a pH of 5.5.
(2) Test conditions: 1 hour, 130F, 1800 rpm.

CITGO and FR WG-40XD are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

Industrial Fluids

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10206C 1 0 2 0 6

Click Here for Return to


PI Sheet Table of Contents
93
P R O D U C T I N F O R M A T I O N

C I T G O G L Y C O L F R - 5 0 4 6 H P
Date 06/15

DESCRIPTION: CITGO Glycol FR-5046HP is a high pressure polymer thickened water-glycol fluid which provides
superior fire-resistance at pressures in excess of 5,000 psi. Pump test results (see Tables 1, 2 and
3) show CITGO Glycol FR-5046HP low pump wear rates to be essentially equivalent or significantly
better than phosphate esters and polyol esters. CITGO Glycol FR-5046HP, therefore, provides long
pump life at high pressures, excellent fire safety plus lower cost than synthetic fluids.

QUALITIES: Fire Protection: CITGO Glycol FR-5046HP contains sufficient water to snuff out ignition which
could occur in hydraulic systems operating under high pressure through a sudden line rupture or
fluid contact with an ignition source. Factory Mutual research tests show that thickened glycol-water
fluid provides superior fire resistance compared to synthetics such as phosphate ester and polyol
ester fluids.
Pump Performance: CITGO Glycol FR-5046HP imparts the necessary lubricity, corrosion protection
and overall performance demanded of a high-pressure antiwear hydraulic fluid.
Higher Operating Temperature: The viscosity of CITGO Glycol FR-5046HP will not drop below
pump minimum requirements even at temperatures greater than 180F, providing greater protection
where piping, cylinders and other components are exposed to high temperatures such as in steel mills
applications. Bulk reservoir temperatures should still be maintained as low as possible to reduce
water evaporation, preferably 135F or less. It is important that water content be monitored and
sufficient water added to maintain water content, bulk density, viscosity and fire protection within an
appropriate range.
Shear Stability: CITGO Glycol FR-5046HP exhibits essentially no viscosity loss (temporary or
permanent) over a wide range of shear rates. (See Table 4.)
Additional features include high viscosity index, low pour point, excellent heat transfer, antifoam
properties, as well as outstanding rust and corrosion protection.

APPLICATIONS: The scope of applications for CITGO Glycol FR-5046HP include mobile equipment or stationary
hydraulic systems in steel mills, foundries, die casting, power transmission plants, etc.
CITGOs Glycol FR-5046HP can also be used in equipment operating in environmentally sensitive
areas. The FR-5046HP product has been shown to have a lower environmental impact than mineral
oil based products. Testing of the fluid has shown that it is relatively harmless to the aquatic species
commonly tested in the U.S. and Canada, additional testing has also shown that FR-5046HP is
relatively harmless to terrestrial species such as earthworms and plant seedlings. CITGO Glycol
FR-5046HP is readily biodegradable per OECD 301B.

(Continued)

(Continued)
Industrial Fluids

C I T GC
O I TPG
eOt r oPl e ut rmo l C
e uo m
r p oCroartpi o nr a t i o
8n0 0/ 284080-/4264884- 46 8
H 4o u s H
t oonu, s T
t oenx,a sT e x M
a sa n u M
f aacdt eu r iend Ui n
S AU S A
C10032C 1 0 0 3 2

Click Here for Return to


PI Sheet Table of Contents
94
P R O D U C T I N F O R M A T I O N

C I T G O G L Y C O L F R - 5 0 4 6 H P
D ate 06/15 - (Continued)
(Continued)
Table 1 Table 2
ASTM D 2882 test results Modified Sperry
Wear Rate Vickers 35V25 pump test
Fluid (mg/hr) Total weight loss (mg)
Conventional water-glycol 0.65 Component Actual Recommended
Phosphate ester 0.05 Ring 20 75
Polyol ester 0.10
Antiwear oil 0.24 Vanes 6 15
CITGO Glycol FR-5046HP 0.10 *Test Conditions: 12-Vane cartridge substituted for the 10-Vane Cartridge
normally used and driven at 1,800 rpm for 49 hr.
Test Conditions: Vickers 104 Vane pump run at 1250 rpm, 2,000 psi, 100 hr.
with test pass criteria of 1 mg/hr wear rate max.

Table 3 Table 4
Sundstrand Series 22 axial-piston pump.
CITGO Glycol FR-5046HP was also evaluated in
a Sundstrand Series 22 axial-piston pump using a
modified water stability test. The pump was rebuilt
according to Sundstrands Bulletin 9658 specifications.
Test conditions were:
Input speed 3.100 100rpm
Load pressure 5,000 psi
Charge pressure 200 20 psi
Case pressure 40 psi max.
Stroke 1/2 of full
Reservoir temperature* 120 10F
Loop temperature* 170 10F
Maximum inlet vacuum 5 psi
Conditions differ from a standard test.
Test duration was 225 hours and followed the sequence: startup at 500 psi
for 2 hr; break-in at 3,000 psi for 1 hr; and full load at 5,000 psi for 222 hr.
A flow degradation of 10% constitutes failure. Test data show that there was
no significant flow degradation (<1%) over the full-load duration of the test.
Subsequent examination of the pump components showed no significant
wear or distress. These data show that high-pressure, thickened water-glycol
hydraulic fluids can be used under conditions where phosphate esters and
polyol esters are normally selected.

TYPICAL PROPERTIES:
CITGO GLYCOL FR-5046HP
Material Code 648346001
Specific Gravity (20/20C) 1.089
Viscosity, cSt at 0C 340
Viscosity, cSt at 40C 46
Viscosity, cSt at 65C 22
Viscosity Index >210
pH 9.9
Pour Point, ASTM D 97, C -50
Appearance Red
Biodegradability, Mod. Sturm Test
Industrial Fluids

OECD 301B, 28 days 78%

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10032C 1 0 0 3 2

Click Here for Return to


PI Sheet Table of Contents
95
P R O D U C T I N F O R M A T I O N

C I T G O H Y D U R A N C E
A W / A L H V I 1 0 0 F L U I D
Date 03/16

DESCRIPTION: CITGO HyDurance AW/AL HVI 100 Fluid is a superior anti-wear and anti-leak, high viscosity index
hydraulic and circulating oil specially formulated to provide outstanding performance under wide
temperature ranges. It has excellent resistance to sludge formation, is chemically stable, and exhibits
premium protection and filterability.

QUALITIES: CITGO HyDurance AW/AL HVI 100 Fluid is formulated with high quality base stocks and premium
additive components to offer trouble-free service in high-pressure, high-output hydraulic circuits
operating under wide temperature conditions. It contains a seal conditioning agent to help prevent and
minimize minor leaks and helps provide longer seal life.
CITGO HyDurance AW/AL HVI 100 Fluid offers:
Low Temperature Performance: Excellent fluidity over a wide temperature change.
Thermal Stability: Superior resistance to heat-related sludging in sensitive
electro-hydraulic servos.
Hydrolytic stability: Will not contribute to the formation of metal-etching acids or
corrosive reactants.
Rust and Corrosion Protection: Inhibited against rusting in both fresh and sea water and
pass both A and B Sequences of the ASTM D 665 Turbine Oil Rust Test.
Wear Protection: Excellent antiwear protection to pumps, motors, valves and other hydraulic
circuit components. Approved against stringent equipment performance requirements.
Anti Foam Performance: Resistant to foaming and will not foster abnormal air entrainment in
properly designed hydraulic circuits.
Demulsibility: Readily separates water, permitting draining of contaminating water from
circulating systems.
Excellent filterability: Premium performance in wet and dry filterability testing.
Seal conditioner for longer seal life.

APPLICATIONS: CITGO HyDurance AW/AL HVI 100 Fluid is recommended for service in industrial and mobile
hydraulic systems when used in accordance with equipment manufacturers recommendations.
CITGO HyDurance AW/AL HVI 100 offers excellent low temperature pumpability and is recommended
for use in mobile and other hydraulic equipment in heavy duty all weather service. It is designed to
provide enhanced service life to vane, piston and gear pumps as well as other circuit components
such as motors and servos.
CITGO HyDurance AW/AL HVI 100 Fluid is also recommended for use as a gear and bearing
lubricant in industrial applications where rust and oxidation inhibited oils are required.
CITGO HyDurance AW/AL HVI 100 Fluid meets or exceeds
Parker Denison HF-0 (Revision J)
Eaton Brochure 03-401-2010

DIELECTRIC STRENGTH RATED


WIDE TEMPERATURE PERFORMANCE
Industrial Fluids

SEAL CONDITIONER
(Continued)

CCI ITTGGOO PPeet tr rool e


l euumm CCoor rppoor raat ti o
i onn 880000/ /224488- -44668844 HHoouusst toonn, , TTeexxaass MMaannuuf faacct tuur reedd i ni n UUSSAA
C10210C 1 0 2 1 0

Click Here for Return to


PI Sheet Table of Contents
96
P R O D U C T I N F O R M A T I O N

C I T G O H Y D U R A N C E
A W / A L H V I 1 0 0 F L U I D
D a(Continued)
te 03/16 - (Continued)

TYPICAL PROPERTIES:

CITGO HYDURANCE AW/AL HVI 100 FLUID

Grade HVI 100


Material Code 633625001
Gravity, ASTM D 4052, API 30.5
Density, lb/gal 7.27
Flash Point, ASTM D 92, COC, C (F) 258 (496)
Viscosity
cP at -23C(1) 19,700
cSt at 40C 103.3
cSt at 100C 14.3
Viscosity Index 142
Four Ball Wear, mm, ASTM D 2266
20 kg load 0.30
40 kg load 0.46
Pour Point, ASTM D 97, C (F) -33 (-27)
Water Separability, ASTM D 1401(2) 40-40-0
Rust Test, ASTM D 665 A, B(3) Pass
Dielectric Strength, KV ASTM D 877(4) 35

Notes: (1) ASTM D 2893 Brookfield Viscosity.


(2) 30 minutes max. separation time to 3 mL emulsion. Test temperature is 180F.
(3) Pass - No Rust.
(4) Minimum dielectric strength is 28 KV when packaged by CITGO Petroleum. Dielectric strength is
sensitive to humidity and contamination; opened containers may exhibit lower values. Store sealed
containers properly in dry environment.

CITGO is a registered trademark and HyDurance is a trademark of CITGO Petroleum Corporation. All other registered
trademarks or trademarks are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

Industrial Fluids

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10210
C10210

Click Here for Return to


PI Sheet Table of Contents
97
P R O D U C T I N F O R M A T I O N

C I T G O H Y D U R A N C E A W
A L L T E M P F L U I D S
Date 12/15

DESCRIPTION: CITGO HyDurance AW All Temp Fluids are superior, high viscosity index, anti-wear hydraulic
and circulating oils specially formulated to provide outstanding resistance to sludge formation, are
chemically stable, and exhibit excellent anti-wear protection and filterability, and can be used over
wide temperature ranges.

QUALITIES: CITGO HyDurance AW All Temp Fluids are formulated with high quality
base stocks and premium additive components to offer trouble-free
service in high-pressure, high-output industrial hydraulic circuits.
CITGO HyDurance AW All Temp Fluids offer:
Thermal Stability: Superior resistance to heat-related sludging in
sensitive electro-hydraulic servos.
Hydrolytic Stability: Will not contribute to the formation of metal-
etching acids or corrosive reactants.
Rust and Corrosion Protection: Inhibited against rusting in both
fresh and sea water and pass both A and B Procedures of the
ASTM D665 Rust Test.
Wear Protection: Excellent anti-wear protection to pumps, motors,
valves, and other hydraulic circuit components. Approved against
stringent equipment performance requirements. CITGO HyDurance AW
All Temp 46 Fluid
Anti-Foam Performance: Resistant to foaming and will not foster
abnormal air entrainment in properly designed hydraulic circuits.
Demulsibility: Readily separate water permitting draining of
contaminating water from circulating systems.

Excellent Filterability: Premium performance in wet and dry


filterability testing.

(Continued)
Industrial Fluids

CCI T
I TGGOO PPeet rt o
r ol el euumm CCoor p
r poor a
r at it oi onn 880000/ 2/ 24488- 4
- 4668844 HHo ou us st ot on n, , TTe ex xa as s MMa an nu uf af ac ct ut ur e
r ed d i ni n UUSSAA
C10238C 1 0 2 3 8

Click Here for Return to


PI Sheet Table of Contents
98
P R O D U C T I N F O R M A T I O N

C I T G O H Y D U R A N C E A W
A L L T E M P F L U I D S
D ate 12/15 - (Continued)
(Continued)

APPLICATIONS: CITGO HyDurance AW All Temp Fluids are recommended for service in industrial and mobile
hydraulic systems when used in accordance with equipment manufacturers recommendations.
They are designed to provide maximum service life to vane, piston, and gear pumps as well as
other circuit components such as motors and servos.
CITGO HyDurance AW All Temp Fluids are also recommended for use as a gear and bearing
lubricant in industrial applications where rust and oxidation inhibited oils are required.
CITGO HyDurance AW All Temp 32 Fluid is a special multigrade anti-wear fluid meeting FMC
Hi-Performance Hydraulic Oil Grade 32 requirements. CITGO HyDurance AW All Temp Fluids 32
and 46 offer excellent low temperature pumpability and are recommended for use in mobile and other
hydraulic equipment in heavy duty all weather service.
CITGO HyDurance AW All Temp Fluids meet:
ASTM D6158 HM (2014) Parker Denison HF-0 (Revision J)
SO 11158 HV (2009) JCMAS HK P041 (2004)
DIN 51524-3 HVLP (2006) US Steel 126, 127, 136
General Motors LS-2 (1997) SEB 181 222 (2007)
Eaton Brochure 03-401-2010

Parker Denison HF-0 Thermal Stability V104C Vane Pump Wear Data

CITGO HyDurance CITGO HyDurance


AW All Temp 32 AW All Temp 32

Parker Denison HF-0 Demulsibility Parker Denison HF-0 Filterability

CITGO HyDurance CITGO HyDurance


AW All Temp 46 AW All Temp 46
Industrial Fluids

(Continued)

CCI ITTGGOO PPeet tr rool leeuumm CCoor rppoor raat ti o


i onn 880000/ /224488- -44668844 HHoouusst o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10238C 1 0 2 3 8

Click Here for Return to


PI Sheet Table of Contents
99
P R O D U C T I N F O R M A T I O N

C I T G O H Y D U R A N C E A W
A L L T E M P F L U I D S
D a(Continued)
te 12/15 - (Continued)

TYPICAL PROPERTIES:

CITGO HYDURANCE AW ALL TEMP FLUIDS

GRADE 32(1) 46

Material Code 633621001 633622001

ISO VG No. 32 46
Gravity, ASTM D4052, API 33.4 32.3
Density, lb/gal 7.15 7.20
Flash Point, ASTM D92, COC,F (C) 385 (196) 423 (217)
Viscosity, cP at -40C(2) 13,900 39,770
cP at -35C(2) 7,200 18,400
cP at -20C(2) 2,424
cSt at 40C 31.2 46.9
cSt at 100C 6.31 8.1
Viscosity Index 159 147
FZG (A/8.3/90), pass load, ISO 14635-1 12 12
Pour Point, ASTM D97, F (C) -54 (-48) -49 (-45)
Color, ASTM D1500 L1.0 L1.0
Water Separability, ASTM D1401 40-40-0 40-40-0 (15)
Oxidation Test, ASTM D943, Hrs. 4800 >4800
Rust Test, ASTM D665 A, B(3) Pass Pass

Notes: (1) Meets FMC Hi-Performance, Hydraulic Oil, Grade 32 requirements.


(2) ASTM D2893 Brookfield Viscosity.
(3) Pass - No Rust.

CITGO and HyDurance are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Industrial Fluids

CITGO Petroleum Corporation 800/248-4684 Houston, Texas Manufactured in USA


CC10238
ITGO Petroleum Corporation 800/248-4684 Houston, Texas Manufactured in USA
C10238
Click Here for Return to
PI Sheet Table of Contents
100
P R O D U C T I N F O R M A T I O N

C I T G O H Y D U R A N C E T M
A W C P F L U I D
Date 06/15

DESCRIPTION: CITGO HyDurance AW CP Fluid is a premium multigrade anti-wear hydraulic fluid designed for
applications where dielectric (insulating) properties are required. CITGO HyDurance AW CP Fluid
offers wide temperature range service in mobile hydraulic equipment, particularly in low temperature
conditions where excellent cold start up hydraulic system performance is required.

QUALITIES: High dielectric strength


Superior low-temperature flow and pumpability
Fluid film strength for warmer climates
Excellent antiwear properties
Foam resistant
Rust and corrosion protection
Long service life
Water separation characteristics
Excellent viscosity shear stability

APPLICATIONS: CITGO HyDurance AW CP Fluid is recommended for most outdoor


and/or mobile hydraulic equipment requiring a fluid with high dielectric
strength properties such as cherry picker lift applications. It provides
excellent service in equipment used under a wide range of operating
conditions and where hydraulic system response is critical such as:
Tree trimming, fruit picking mobile equipment
Firefighting lift trucks, buckets, etc.
Aerial lift buckets
Mobile hydraulic systems
Garbage collection equipment
Public utility vehicles
Construction equipment in colder services

CITGO HyDurance AW CP Fluid meets or exceeds the following:


Dielectric Strength, ASTM D 877, 35 KV minimum
ASTM D 6158 HM (2005)
Parker Denison HF-0 (Revision J)
DIN 51524-2 (2006) DIELECTRIC STRENGTH RATED
Eaton Brochure 03-401-2010
WIDE TEMPERATURE PERFORMANCE
General Motors LS-2 (1997)
JCMAS HK P041 (2004)
ISO 11158 HM (FDIS 2008)
SEB 181 222 (2007)
Industrial Fluids

(Continued)
(Continued)

CIT
CITGO PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10030C 1 0 0 3 0

Click Here for Return to


PI Sheet Table of Contents
101
P R O D U C T I N F O R M A T I O N

C I T G O H Y D U R A N C E T M
A W C P F L U I D
D ate 06/15 - (Continued)
(Continued)

TYPICAL PROPERTIES:

CITGO HYDURANCETM AW CP FLUID

Material Code 633623001

Gravity, ASTM D 4052, API 30.8


Density, lb/gal 7.26
Flash Point, COC, ASTM D 92, F (C) 367 (186)
Color Blue-green
Viscosity, ASTM D 2983, cP at -40C 20,450
cP at -23C 1,590
cP at -18C 860
ASTM D 455, cSt at 40C 25.6
ASTM D 455, cSt at 100C 5.4
Viscosity Index, ASTM D 2270 155
Pour Point, ASTM D 97, F (C) -54 (-48)
Aniline Pt., ASTM D 611, F 204
Total Acid Number, ASTM D 664 0.6
Turbine Oil Oxidation, ASTM D 943, hrs 2775
Turbine Oil Rust Test, ASTM D 665, A and B Pass
Water Separability, ASTM D 1401, at 130F (54C) 40-40-0 (10)
Dielectric Strength, ASTM D 877, KV, minimum 35

CITGO is a registered trademark and HyDurance is a trademark of CITGO Petroleum Corporation. All other registered
trademarks or trademarks are the property of their respective owners.
Industrial Fluids

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10030C 1 0 0 3 0

Click Here for Return to


PI Sheet Table of Contents
102
P R O D U C T I N F O R M A T I O N

C I T G O H Y D U R A N C E
A W F L U I D S
Date 07/16

DESCRIPTION: CITGO HyDurance AW Fluids are superior anti-wear hydraulic and circulating oils specially formulated
to provide outstanding resistance to sludge formation, are chemically stable, and exhibit excellent
anti-wear protection and filterability.

QUALITIES: CITGO HyDurance AW Fluids are formulated with high quality base
stocks and premium additive components to offer trouble-free service in
high-pressure, high-output industrial hydraulic circuits.
CITGO HyDurance AW Fluids offer:
Thermal Stability: Superior resistance to heat-related sludging in
sensitive electro-hydraulic servos.
Hydrolytic Stability: Will not contribute to the formation of metal-
etching acids or corrosive reactants.
Rust and Corrosion Protection: Inhibited against rusting in both
fresh and sea water and pass both A and B Sequences of the
ASTM D665 Turbine Oil Rust Test.
Wear Protection: Excellent antiwear protection to pumps, motors,
valves, and other hydraulic circuit components. Approved against
stringent equipment performance requirements.
CITGO HyDurance AW 68 Fluid
Anti Foam Performance: Resistant to foaming and will not foster
abnormal air entrainment in properly designed hydraulic circuits.
Demulsibility: Readily separate water permitting draining of
contaminating water from circulating systems.

Excellent Filterability: Premium performance in wet and dry


filterability testing.

(Continued)

(Continued)
Industrial Fluids

CCI T
I TGGOO PPeet rt o
r ol el euumm CCoor p
r poor a
r at it oi onn 880000/ 2/ 24488- 4
- 4668844 HHo ou us st ot on n, , TTe ex xa as s MMa an nu uf af ac ct ut ur e
r ed d i ni n UUSSAA
C10203C 1 0 2 0 3

Click Here for Return to


PI Sheet Table of Contents
103
P R O D U C T I N F O R M A T I O N

C I T G O H Y D U R A N C E
A W F L U I D S
(Continued)
Date 07/16 - (Continued)

APPLICATIONS: CITGO HyDurance AW Fluids are recommended for service in industrial and mobile hydraulic sytems
when used in accordance with equipment manufacturers recommendations. They are designed to
provide maximum service life to vane, piston, and gear pumps as well as other circuit components
such as motors and servos.
CITGO HyDurance AW Fluids are also recommended for use as a gear and bearing lubricant in
industrial applications where rust and oxidation inhibited oils are required. Consult owners manual for
proper lubricant selection.
CITGO HyDurance AW Fluids meet:
ASTM D 6158 HM (2005) General Motors LS-2 (1997)
Fives Cincinnati P-68, 69, 70 JCMAS HK P041 (2004)
Parker Denison HF-0 (Revision J) ISO 11158 HM (FDIS 2008)
DIN 51524-2 (2006) SEB 181 222 (2007)
Eaton Brochure 03-401-2010 US Steel 126, 127, 136

Parker Denison HF-0 Thermal Stability V104C Vane Pump Wear Data

CITGO HyDurance CITGO HyDurance


AW 32 AW 32

Parker Denison HF-0 Demulsibility Parker Denison HF-0 Filterability

CITGO HyDurance CITGO HyDurance


AW 46 AW 46

(Continued)
Industrial Fluids

(Continued)

CCI TI TGGOO PPe et rt or ol el eu umm CCo or pr po or ar at it oi on n 8 80 00 0/ 2/ 24 48 8- 4- 46 68 84 4 HHo ou us st ot on n, , T Te ex xa as s MMa an nu uf af ac ct ut ur er ed d i ni n UUSSAA


C10203C 1 0 2 0 3

Click Here for Return to


PI Sheet Table of Contents
104
P R O D U C T I N F O R M A T I O N

C I T G O H Y D U R A N C E
A W F L U I D S
(Continued)
D ate 07/16 - (Continued)

TYPICAL PROPERTIES:

CITGO HYDURANCE AW FLUIDS

GRADE 22 32 46 68 100 150

Material Code 633606001 633607001 633608001 633609001 633610001 633611001

Gravity, ASTM D4052, API 33.7 32.6 31.2 30.8 28.6 29.3
Density, lb/gal 7.13 7.18 7.24 7.26 7.36 7.33
Flash Point, ASTM D92,
COC,F (C) 399 (204) 417 (214) 446 (230) 468 (242) 471 (244) 500 (260)
Viscosity, cP at -40C(1)
cP at -35C(1)
cP at -20C(1)
cSt at 40C 22.3 32.3 46.6 68 98 149
cSt at 100C 4.45 5.59 6.96 9.0 11.1 14.8
Viscosity Index 110 111 106 107 98 99
FZG (A/8.3/90), pass load,
ISO 14635-1 12 12 12 12 12 12
Pour Point, ASTM D97,
F (C) -40 (-40) -27 (-33) -22 (-30) -17 (-27) -6 (-21) 0 (-18)
Color, ASTM D1500 L0.5 L0.5 L0.5 L0.5 L3.0 L2.5
Water Separability, ASTM D1401(2) 40-40-0 40-40-0 40-40-0 40-40-0 40-40-0 40-40-0
Oxidation Test, ASTM D943,
Hrs. 6000 6000 6000 5000 4000 2850
Rust Test, ASTM D665 A, B(3) Pass Pass Pass Pass Pass Pass
Meets Fives Cincinnati
Requirement P-68 P-70 P-69
AF NOR NF E 48-603 HM22 HM32 HM46 HM68 HM100 HM150
ISO VG No. 22 32 46 68 100 150

Notes: (1) ASTM D 2893 Brookfield Viscosity.


(2) 30 minutes max. separation time to 3ml emulsion. Test temperature is 130F for grades up through ISO 68.
Test temperature is 180F for ISO 100 and 150.
(3) Pass - No Rust.

CITGO and HyDurance are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of
their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice.

Industrial Fluids

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10203C 1 0 2 0 3

Click Here for Return to


PI Sheet Table of Contents
105
P R O D U C T I N F O R M A T I O N

CITGO HYDUR AN C E
AW M I N I N G FL U I D
Date 06/15

DESCRIPTION: CITGO HyDurance AW Mining Fluid is a superior anti-wear hydraulic and circulating fluid specially
formulated with thermally stable additives. Offers outstanding resistance to sludge formation, is
chemically stable, and exhibits excellent anti-wear protection.

QUALITIES: CITGO HyDurance AW Mining Fluid offers trouble-free service in high-pressure, high-output hydraulic
systems commonly used in off road, construction, and mining operations.
Contains a blue dye for improved sight gauge visibility and leak detection assistance.
Utilizes highly thermally stable additives, virtually eliminating heat-related sludge formation in severe
operation applications.
Inhibited against rusting in both fresh and sea water and passes both A and B Sequences of the
ASTM D 665 Turbine Oil Rust Test.
Offers excellent anti-wear protection to pumps, motors, valves and other hydraulic circuit components.
Approved against stringent performance requirements including Fives Cincinnati P-68, P-69 and P-70,
Parker Hannifin (Denison) HF-O, and Eaton Brochure 03-401-2010 (formerly M-2950-S, I-286-S).
Resists foaming and will not foster abnormal air entrainment.
Readily separates water permitting contaminating water to be drained from hydraulic sumps.

APPLICATIONS: CITGO HyDurance AW Mining Fluid is recommended for vane, piston, and gear pumps operating in
off road, construction, and mining hydraulic system service when used in accordance with equipment
manufacturer recommendations.

TYPICAL PROPERTIES:
CITGO HYDURANCE AW MINING FLUID
ISO Grade 46
Material Code 633495001
Gravity, ASTM D 4052, API 31.2
Density, lb/gal 7.24
Flash Point, COC, ASTM D 92, F (C) 446 (230)
Viscosity, ASTM D 445
cSt at 40C 46.6
cSt at 100C 6.96
Viscosity Index 106
Pour Point, ASTM D 97, F (C) -22 (-30)
Color, Visual Blue
Water Separability, ASTM D 1401 40-40-0
Oxidation Test, ASTM D 943, Hrs. >2500
Rust Test, ASTM D 665 A, B Pass
Meets Eaton Brochure 03-401-2010 Requirements Yes
Meets Parker Hannifin (Denison) HF-O Requirements Yes
Meets Fives Cincinnati Requirements P-70
AFNOR NF E 48-603 HM46
Industrial Fluids

CITGO and HyDurance are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGO CITPG e tOr oPl ee ut rmo l C


euom
r p oCr oa rt pi oo nr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10225C 1 0 2 2 5

Click Here for Return to


PI Sheet Table of Contents
106
P R O D U C T I N F O R M A T I O N

C I T G O H Y D U R A N C E
A W N Z F L U I D S
Date 06/15

DESCRIPTION: CITGO HyDurance AW NZ Fluids are high performance lubricants formulated with premium base
stocks and ashless additives to provide outstanding protection for demanding hydraulic systems,
especially those operating in environmentally sensitive areas.
CITGO HyDurance AW NZ Fluids are zinc free. Zinc compounds are regulated as priority pollutants
under provisions of the Clean Water Act and SARA Title 313.

BENEFITS: Non-toxic in acute aquatic toxicity test (LC-50) per OECD TG 203
limit test.
Inherently biodegradable.
Zinc free formulation for less impact on the environment.
Excellent thermal stability to virtually eliminate heat-related
sludge deposits.
Provide outstanding rust and corrosion protection.
Separate readily from water.
Contain inhibitors to minimize foaming and air entrainment.
Provide premium anti-wear protection to pumps, motors and other
hydraulic components.
Offer extended fluid service life capability with a fortified premium
CITGO HyDurance AW
formulation to handle severe operating conditions.
NZ 32 Fluid

APPLICATIONS: CITGO HyDurance AW NZ Fluids offer premium non-zinc anti-wear protection to vane, piston and
gear pumps, motors, valves and other hydraulic circuit components when used in accordance with
manufacturers recommendations.
They meet or exceed the stringent performance requirements of:
GM LS-2 Fives Cincinnati P-68, P-69, P-70
Eaton Brochure 03-401-2010 U.S. Steel 127, 136, 126
DIN 51524 PART 2 Parker Hannifin France (Denison) HF-0

CITGO HyDurance AW NZ Fluids can also be used in circulating systems of machine tools, presses,
air compressors and other gear and bearing applications where rust and oxidation inhibited oils are
required. They can be used in applications operating in environmentally sensitive areas where the use
of a zinc free, ashless formulated fluid is desired such as:
Marine Offshore Rigs, Tugs, Dredges, Hydraulic Lifts, Cranes, Pile-Drivers (Note: Does not meet
EPA 2013 Vessel General Permit VGP EAL requirements)
Forestry Scalpers, Excavators, Wheel Loaders
Construction Bulldozers, Graders, Backhoes
Mining Conveyors, Crawlers, Hole Drillers
Industrial Fluids

(Continued)
(Continued)

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, sTt oe nx ,a sT e x M
a sa n u M
f aacdt u
ere
i nd Ui nS AU S A
C10137C 1 0 1 3 7

Click Here for Return to


PI Sheet Table of Contents
107
P R O D U C T I N F O R M A T I O N

C I T G O H Y D U R A N C E
A W N Z F L U I D S
(Continued)
Date 06/15 - (Continued)

TYPICAL PROPERTIES:

CITGO HYDURANCE AW NZ FLUIDS

Grade 32 46 68

Material Code 633615001 633616001 633617001

Gravity, ASTM D 4052, API 32.3 31.2 29.3


Density, lb/gal 7.19 7.24 7.33
Flash Point, ASTM D 92 (COC) C (F) 215 (419) 206 (403) 242 (468)
Viscosity, cSt at 40C 32 46 68
cSt at 100C 5.5 6.9 8.5
Viscosity Index, ASTM D 2270 110 105 94
Pour Point, ASTM D 97, C (F) -39 (-38) -36 (-33) -24 (-11)
Color, ASTM D 1500 L1.0 L1.0 L1.5
Total Acid No., ASTM D 664, mgKOH/g 0.10 0.5 0.10
Copper Corrosion, ASTM D 130, 3h at 100C 1A 1A 1A
Rust Test, ASTM D 665 A, B Pass Pass Pass
Four Ball Wear, ASTM D 4172, at 40 kg, mm 0.70 0.55 0.50
Foam Test, Seq. I, ml 20-0 0-0 0-0
Foam Test, Seq. II, ml 10-0 0-0 20-0
Foam Test, Seq. III, ml 20-0 0-0 0-0
Water Separability, ASTM D 1401, at 130F 40-40-0 40-40-0 40-40-0

CITGO and HyDurance are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

NOTE: Contamination with other fluids can affect environmental benefits and system performance.
Contamination with zinc containing and/or emulsifiable fluids may cause foaming, premature filter
saturation, and a decrease in water separability.

ZINC FREE
INHERENTLY BIODEGRADABLE
NON-TOXIC PER LC-50 AQUATIC TOXICITY TEST
EXTENDED FLUID LIFE CAPABILITY
Industrial Fluids

CITGO
CIP
TGe tOr o P
l eeut m
r o lCe ou rmp oCr oa rt p
i oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8o4 us tHo on u, sTt o
enxa
, sT e xM
a sa nu fMaac dt ue r ei nd Ui nS AU S A
C10137C 1 0 1 3 7

Click Here for Return to


PI Sheet Table of Contents
108
P R O D U C T I N F O R M A T I O N

C I T G O H Y D U R A N C E A W S U P E R N Z F L U I D
Date 06/15

DESCRIPTION: CITGO HyDurance AW Super NZ Fluid is a high efficiency, wide temperature use range hydraulic fluid.
It is formulated with premium base stocks and ashless additives to provide long fluid life and outstanding
protection for demanding mobile equipment hydraulic systems. CITGO HyDurance AW Super NZ Fluid
is zinc free. Zinc compounds are regulated as priority pollutants under provisions of the Clean Water Act
and SARA Title 313. Multigrade performance offers ISO 68 viscosity characteristics at high operating
temperatures and ISO 32 viscosity characteristics at low operating temperatures.

QUALITIES: CITGO HyDurance AW Super NZ Fluid offers:

Increased pump efficiency leading to improved productivity

Zinc free and non-toxic in acute aquatic toxicity test (LC-50) per OECD TG 203 limit test for
less environmental impact

Multigrade performance for wide application temperature range

Excellent shear and thermal stability provides extended fluid service life capability.

Separates readily from water to allow draining of water from systems

Premium rust and corrosion protection for harsh environments

Excellent foam control for dependable performance

Provides outstanding antiwear protection to pumps, motors and other hydraulic circuit components

Recommended for use in Hitachi excavators with 4,000 hour service intervals.

Industrial Fluids

(Continued)
(Continued)

CIT
CITGO PGe tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10232C 1 0 2 3 2

Click Here for Return to


PI Sheet Table of Contents
109
P R O D U C T I N F O R M A T I O N

C I T G O H Y D U R A N C E A W S U P E R N Z F L U I D
Date 06/15 - (Continued)
(Continued)

APPLICATIONS: CITGO HyDurance AW Super NZ Fluid is designed for increased hydraulic efficiency while providing
excellent service life in vane, piston, and gear pumps when used in accordance with equipment
manufacturer recommendations.

CITGO HyDurance AW Super NZ Fluid is highly recommended for high pressure mobile equipment
hydraulic systems operating in wide temperature applications such as mining, construction and
logging operations.

CITGO HyDurance AW Super NZ Fluid meets performance requirements of:

GM LS-2
Eaton Brochure 694 (formerly Vickers I-286-S and M-2950-S)
DIN 51524 PART 3
U.S. Steel 127, 136, 126
Cincinnati Machine P-68, P-69, P-70
Parker Hannifin France (Denison) HF-0
Hitachi Excavators

TYPICAL PROPERTIES:

CITGO HYDURANCE AW SUPER NZ FLUID

Material Code 633618001


Gravity, ASTM D 4052, API 31.5
Density, lb/gal 7.23
Flash Point, PM, ASTM D 93, F (C) 385 (196)
Viscosity, ASTM D 445, cSt at 40C 53.0
cSt at 100C 9.9
Viscosity Index, ASTM D 2270 177
Brookfield Viscosity, ASTM D2983, cP
@-30C 7,998
@-40C 36,392
Pour Point, ASTM D 97, F (C) -49 (-45)
Color Blue
Copper Corrosion, ASTM D 130, 3h at 100C 1A
Rust Test, ASTM D 665 A, B Pass
Four Ball Wear, ASTM D 4172, at 40 kg, mm 0.50
Foam Test, ml, ASTM D 892
Sequence I 10-0
Sequence II 25-0
Sequence III 0-0
Water Separability @ 130F, ASTM D 1401 40-40-0
Acute aquatic toxicity (LC-50) per OECD TG 203 Pass

Notes: Contamination with other fluids can affect environmental benefits and system performance. Contamination with
zinc containing and/or emulsifiable fluids may cause foaming, premature filter saturation, and a decrease in water
separability. Refer to equipment owners manual for proper lubricant selection.
Industrial Fluids

CITGO and HyDurance are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CIP
CITGO TGe tOr o P
l eeut m
r o lCe ou rmp oCr oa rt p
i oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHo on u, sTt oe nx ,a sT e xM
a sa nu M
f aac dt ue r e
i nd Ui nS AU S A
C10232C 1 0 2 3 2

Click Here for Return to


PI Sheet Table of Contents
110
P R O D U C T I N F O R M A T I O N

C I T G O H Y D U R A N C E TM A W
S Y N T H E T I C F L U I D S
Date 06/15

DESCRIPTION: CITGO HyDurance AW Synthetic Fluids are premium ashless hydraulic fluids formulated with the
highest quality synthetic base stocks and additives. These fluids offer outstanding chemical stability,
anti-wear protection and resistance to sludge formation.

QUALITIES: CITGO HyDurance AW Synthetic Fluids offer excellent low and high
temperature performance providing a higher margin of equipment
protection, beyond the capabilities of comparable mineral oils. The
combination of synthetic base stocks and ashless additive package
provide a product with exceptional oxidation stability allowing for
extended drain and filter change intervals. High resistance to sludge
formation helps assure clean and trouble free operation.
Excellent thermal and oxidative stability reducing system deposits
resulting in longer fluid life.
High viscosity index and low pour point allows for operation over a
wide temperature range without viscosity loss problems typical of
mineral multigrade oils.
Excellent corrosion protection.
Exceptional demulsibility allows for the separation of large amounts
of water from the system. CITGO HyDuranceTM AW 46
Exceptional anti-wear properties Synthetic Fluid

APPLICATIONS: CITGO HyDurance AW Synthetic Fluids are designed for use in vane, piston and gear pumps typically
found in hydraulic and circulating systems. These fluids are designed to provide the excellent service
life to pumps, servos and motors.

CITGO HyDurance AW Synthetic Fluids meet or exceed the following manufacturer specifications:
Eaton Brochure 03-401-2010(formerly Vickers I-286-S, M-2950-S)
Parker Denison HF-0, HF-1, HF-2
Fives Cincinnati P-70 (ISO 46), P-69 (ISO 68)
U.S. Steel 127, 136

FULLY SYNTHETIC
EXTREME TEMPERATURE PERFORMANCE
Industrial Fluids

(Continued)
(Continued)

CITGO
CIP
TGe tOr o P
l eeut m
r o lCe ou rmp oCr oa rt p
i oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHo on u, sTt oe nx ,a sT e xM
a sa nu M
f aac dt ue r e
i nd Ui nS AU S A
C10149C 1 0 1 4 9

Click Here for Return to


PI Sheet Table of Contents
111
P R O D U C T I N F O R M A T I O N

C I T G O H Y D U R A N C E TM A W
S Y N T H E T I C F L U I D S
(Continued)
D ate 06/15 - (Continued)

TYPICAL PROPERTIES:

CITGO HYDURANCETM AW SYNTHETIC FLUIDS

Grade 46 68
Material Code 633602001 633603001
Specific Gravity, 60/60F 0.8498 0.8540
Density, lb/gal 7.08 7.11
Viscosity, ASTM D 445, cSt at 40C 43.4 67.0
cSt at 100C 7.29 10.08
Viscosity Index, ASTM D 2270 131 135
Flash Point, ASTM D 92, C (F) 266 (510) 268 (514)
Pour Point, ASTM D 97, C (F) -60 (-76) -57 (-70)
Color, ASTM D 1500 1.0 1.0
Brookfield Viscosity cP at -18C 1500 2865
cP at -26C 3340
Water Separation, ASTM D 1401, at 130F (54C) 40/40/0 (5) 40/40/0 (5)
Four Ball Wear, ASTM D 4172,
40kg, mm 0.60 0.58
Copper Corrosion, ASTM D 130 1B 1B
Rust Protection, ASTM D 665
DI Water Pass Pass
Sea Water Pass Pass
Foam Sequence, ASTM D 892, I, II, III Pass Pass

CITGO is a registered trademark and HyDurance is a trademark of CITGO Petroleum Corporation. All other registered
trademarks or trademarks are the property of their respective owners.
Industrial Fluids

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10149C 1 0 1 4 9

Click Here for Return to


PI Sheet Table of Contents
112
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
O I L S
Date 07/15

DESCRIPTION: CITGO Pacemaker Oils are rust and oxidation (R&O) inhibited general purpose lubricants.
They are manufactured with high viscosity index base stocks, contain anti-foam additives, and readily
separate from water.

QUALITIES: These oils are made from high quality, paraffinic base stocks.
Their high viscosity index imparts superior temperature-viscosity characteristics. Long service life in
closed circulating systems is assured by low carbon-forming tendency and excellent resistance to
oxidation, rusting and foaming.

APPLICATIONS: Appropriate viscosity grade Pacemaker Oils can be used as:


Air line oil
Circulating oil
Gear oil
Compressor oil
Rust/oxidation inhibited (R&O) oil
Low pressure hydraulic oil
Non-detergent oil

(Continued)
(Continued)

Industrial Fluids

CITGO PG
CIT e tOr oPl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10034C 1 0 0 3 4

Click Here for Return to


PI Sheet Table of Contents
113
Industrial Fluids

PI Sheet
Click Here for
(Continued)
C I T G O
P

C10034C 1 0 0 3 4
R

TYPICAL PROPERTIES:

CITGO PACEMAKER OILS


O

C I T G O P e t r o l etrademarks
Grade 19 32 46 68 100 150 220 320 460 680

u m C o rare
D

ate 07/15 - (Continued)

p othe
Material Code 633013001 633001001 633002001 633003001 633006001 633008001 633009001 633010001 633012001 633014001
U

Gravity, ASTM D 4052,

r aproperty
C

API 34.3 32.6 31.5 31.0 30.3 29.5 28.2 27.0 26.5 25.1

t i o n of
Pounds Per Gallon 7.11 7.18 7.23 7.26 7.28 7.32 7.37 7.43 7.46 7.52
P A C E M A K E R

Flash Point, ASTM D 92,

their
T

F(C), Min. 395 (202) 395 (202) 395 (202) 442 (228) 442 (228) 442 (228) 442 (228) 442 (228) 579 (304) 579 (304)
Viscosity:
cSt at 40C 22 32 45 68 100 150 220 320 456 676
I

8 0 0respective
cSt at 100C 4.55 5.2 6.7 8.3 10.5 16.5 18.2 23.6 30.1 39.0
Viscosity Index 102 110 103 104 102 98 98 96 95 86
O I L S

Pour Point, ASTMD 97,


N

114
/ 2 4 8 - 4owners.
F(C) -22 (-30) -33 (-36) -22 (-30) -27 (-33) -22 (-30) 0 (-18) 0 (-18) 0 (-18) 10 (-12) -5 (-15)
Color, ASTM D 1500 L0.5 L0.5 L0.5 L0.5 L1.0 L5.0 L5.0 L5.5 L5.5 L5.5
F

Neutralization No.,
ASTM D 974 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1
O

Turbine Oil Rust Test,


ASTM D 665 Pass(1) Pass(1) Pass(1) Pass(1) Pass(1) Pass(2) Pass(2) Pass(2) Pass(2) Pass(2)
R

Cincinnati Lamb
Requirement P-45 P-38 P-55 P-54 P-57
M

ISO VG No. 22 32 46 68 100 150 220 320 460 680


A

AGMA Grade - - 1 2 3 4 5 6 7 8

Notes: (1) Procedure A (distilled water) and Procedure B (synthetic sea water) - 24 hrs
T

(2) Procedure A (distilled water)


I
O
N

CITGO and Pacemaker are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or

Return to
684 Houston, Texas Manufactured in USA

Table of Contents
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
T O I L S
Date 03/16

DESCRIPTION: CITGO Pacemaker T Oils are extra inhibited high quality lubricants designed specifically as
turbine oils.

QUALITIES: These oils are made from high viscosity index paraffinic base stocks that are processed by
modern hydrotreating methods. Their high viscosity index imparts superior temperature-viscosity
characteristics. Long service life in closed circulating systems is assured by low carbon content,
high flash point and excellent resistance to oxidation, rusting and foaming.
Each grade of CITGO Pacemaker T Oil passes both procedures of the ASTM Turbine Oil Rust Text
and will provide extended oxidation life as measured in the ASTM D 943 Turbine Oil Oxidation Test.

APPLICATIONS: CITGO Pacemaker T Oils in proper viscosity grade are recommended for pressure-circulation
systems of direct-connected steam turbines and for the bearings of turbo-generators.

They are also recommended for the lubrication of steam turbines with single-reduction gear units,
as found in marine service.

CITGO Pacemaker T Oils are suitable for the lubrication of industrial gas turbines and gear units.

CITGO Pacemaker T Oils are also highly recommended for use in compressor equipment, air lines,
circulating oil systems and gears where a R and O (Rust and Oxidation inhibited) type oil is specified.

Pacemaker T-32 meets the performance recommendations of:


General Electric GEK 32568 H
Fives Cincinnati P-38 (Grade T-32)
ALSTOM HTGD 90117
ASTM D 4304 Type I, II, III
British Standard BS 489
DIN 51515 Part 1, 2
DIN 51524 Part 1
ISO 8068 TSA TGA, TGE TSE
ISO 11158 HH, HL
SIEMENS AG TLV 9013 04 Standard Thermal Stability
SIEMENS AG TLV 9013 05 High Thermal Stabiliity
Solar ES9-244L grades C32 (150), C46 (5-215) (Grades T-32, T-46) respectively

Pacemaker T-68 is suitable for mist applications as evidenced by the Alemite test.

(Continued)
Industrial Fluids

(Continued)

CCI ITTGGOO PPeet tr rool leeuumm CCoor rppoor raat ti ioonn 880000/ /224488- -44668844 HHoouusst toonn, , TTeexxaass MMaannuuf faacct tuur reedd i inn UUSSAA
C10035C 1 0 0 3 5

Click Here for Return to


PI Sheet Table of Contents
115
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
T O I L S
(Continued)
D ate 03/16 - (Continued)

TYPICAL PROPERTIES:

CITGO PACEMAKER T OILS

Grade T-32 T-46 T-68 T-115

Material Code 633715001 633720001 633730001 633745001

Gravity, ASTM D4052, API 32.7 31.4 30.9 29.0


Pounds Per Gallon 7.18 7.24 7.26 7.34
Flash Point, COC, ASTM D92, F (C) 442 (228) 446 (230) 489 (254) 536 (280)
Viscosity, ASTM D445, cSt at 40C 32.0 44.7 66.7 109
Viscosity, ASTM D 445, cSt at 100C 5.5 6.8 8.8 12.2
Viscosity Index, ASTM D2270 107 104 105 102
Pour Point, ASTM D97, F (C) -38 (-39) -38 (-39) -38 (-39) 0 (-18)
Color, ASTM D1500 L1.0 L1.0 L1.5 1.5
Foam Test, ASTM D892 (1), Seq. I, II, III Pass Pass Pass Pass
Aniline Point, ASTM D611, F (C) 219 (104) 223 (106) 230 (110) 244 (118)
Neutralization No., ASTM D664 0.1 0.1 0.1 0.1
Corrosion, ASTM D130, 3 hours at 212F 1B 1B 1B 1B
Oxidation, ASTM D943(2), hours 10,000 + 10,000 +
Water Separation, Dist. Water,
ASTM D1401, at 130F (54C) 40-40-0 (15) 40-40-0 (15) 40-40-0 (20)
ASTM D 1401, at 180F (82C) 40-40-0 (20)
Turbine Oil Rust Test, ASTM D665(3) Pass Pass Pass Pass
RPVOT, ASTM D2272, minutes 2780 2,500 1160 780
ISO VG No. 32 46 68
AGMA Grade 0 1 2

Note:
(1) 50 ml. max. at end of blowing period. No foam after 10 minutes setting.
(2) Hours to reach acid number of 2.0 mg. of KOH per gram of oil.
(3) Procedures A (distilled water) and B (synthetic sea water) 24 hours.

CITGO and Pacemaker are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.
Industrial Fluids

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10035C 1 0 0 3 5

Click Here for Return to


PI Sheet Table of Contents
116
P R O D U C T I N F O R M A T I O N

C I T G O S E N T R Y
O I L S
Date 08/15

DESCRIPTION: CITGO Sentry Oils are a complete line of highly-refined, non-additive mineral oils for bearing and
other general purpose lubrication.

QUALITIES: They are made with high viscosity index base stocks having low carbon residue and high
thermal stability.
Available in several viscosity grades, these oils provide good lubrication with low maintenance costs,
and have the necessary characteristics to permit their use in many applications.

APPLICATIONS: CITGO Sentry Oils are recommended for general lubrication of industrial machinery, machine tools,
engine bearings, and other plant equipment where a non-additive mineral oil is desired.
Grades 19 through 68 are recommended for heat transfer applications and in hydraulic systems
where pressures or temperatures are moderate. They can be used in many applications where high
oil loss makes the use of a lower cost product desirable.
CITGO Sentry Oils can be used as diluents for cutting oil bases, flushing oils, form oils for brick
presses and steel concrete forms, lubricants for small electric motors, and other applications where a
non-additive mineral oil is desired.

TYPICAL PROPERTIES:

CITGO SENTRY OILS

Grade 15 19 32 68 129 460


Material Code 637001001 637019001 637004001 637006001 637099001 637015001
Gravity, ASTM D 4052, API 33.1 32.9 31.0 29.9 30.5 26.5
Density, lb/gal at 60F 7.16 7.17 7.25 7.30 7.28 7.46
Flash Point, COC, ASTM D 92,
F (C) 380 (193) 388 (198) 424 (218) 465 (241) 516 (269) 595 (313)
Viscosity:
ASTM D 445, cSt at 40C 15.7 19 32 65.3 112 460
ASTM D 2161, SUS at 100F 90 105 158 339 600 2500
Viscosity Index, ASTM D 2270 90 95 95 93 99 95
Pour Point, ASTM D 97, F (C) 5 (-15) 5 (-15) 5 (-15) 10 (-12) 8 (-13) 10 (-12)
Color, ASTM D 1500 L0.5 1.0 1.0 1.0 0.5 5.0

ISO VG No. 15 32 68 460

CITGO and Sentry are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.
Industrial Fluids

CIT
CITGO PGe tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10036C 1 0 0 3 6

Click Here for Return to


PI Sheet Table of Contents
117
P R O D U C T I N F O R M A T I O N
Industrial Gear Oils

C I T G O C I T G E A R
M G W - O G L
Date 06/15

DESCRIPTION: CITGO CITGEAR MGW-OGL is an asphaltic open gear lubricant designed to protect heavily loaded
open gears. CITGO CITGEAR MGW-OGL provides a heavy, dense film that includes extreme
pressure additives that ensure smooth operation even on gears that operate under harsh conditions.
This gear lubricant contains a solvent for ease in handling and application.

QUALITIES: CITGO CITGEAR MGW-OGL offers the following qualities:


Resistance to sludge and deposit formation.
High film strength
Excellent wear protection
Extends gear life
Protects against rust and corrosion
Water wash-off protection
Suitable for use in airless spray systems
Non-chlorinated

APPLICATIONS: Grinding mill gear and pinion, ball grinding mill gear and pinion, girth gears, SAG mill gears, cement
kiln open gears

APPROVAL: Shanghai Heavy Industries

TYPICAL PROPERTIES:

CITGO CITGEAR MGW-OGL

Material Code 631056001

Texture Smooth
Color Black
Flash Point, ASTM D-92, F (C) (without diluent) 475 (246)
Flash Point, ASTM D-92, F (C) (with diluent) 240 (116)
Viscosity ASTM D-445 100C, cSt (without diluent) 1000-2300
Viscosity ASTM D-445 40C, cSt (with diluent) 900-1600
Four Ball Weld EP, ASTM D-2783, kg 500
Four Ball Wear, ASTM D-4172, mm 0.33
Four Ball LWI, ASTM D-2783, kgf 83
Copper Corrosion, ASTM D-130 3B
Rust Prevention, ASTM D-665 Pass
FZG, ASTM D-5182, Load Stages Passed >12
USS Mobility, @ 0 C, gls 1.65

CITGO and CITGEAR are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10213C 1 0 2 1 3

Click Here for Return to


PI Sheet Table of Contents
118
P R O D U C T I N F O R M A T I O N

Industrial Gear Oils


C I T G O C I T G E A R
O G L - A
Date 08/15

DESCRIPTION: CITGO CITGEAR OGL-A is an adhesive open gear lubricant. It can be applied to guide rails, fifth
wheels, slideways, swing gears, open gears and wire ropes. This gear lubricant contains a solvent for
ease in handling and application.

QUALITIES: CITGO CITGEAR OGL-A offers:


High film strength
Anti-wear protection
Water wash-off resistance
Solvent cut-back to improve ease of application

TYPICAL PROPERTIES:

CITGO CITGEAR OGL-A

Material Code 631051001

Texture Smooth
Color Black
Flash Point, ASTM D 92, F (C), COC 142 (61)
Timken OK Load, ASTM D 2509, lbs. 30
Fillers None
Viscosity (without solvent)
ASTM D 445, cSt @ 100C 1,450 - 2,000

CITGO and CITGEAR are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.

CIT
CITGO PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10051C 1 0 0 5 1

Click Here for Return to


PI Sheet Table of Contents
119
P R O D U C T I N F O R M A T I O N
Industrial Gear Oils

C I T G O C I T G E A R
S Y N T H E T I C E P
L U B R I C A N T S
D a t e 11 / 1 6

DESCRIPTION: CITGO CITGEAR Synthetic EP Gear Lubricants are designed for highly loaded gear applications
operating at high temperatures and/or very low temperatures, severe conditions, or requiring extreme
pressure (EP) protection.

QUALITIES: Compared to conventional mineral oil based products, CITGEAR Synthetic EP lubricants offer
exceptionally low pour points and high viscosity indexes.
The high viscosity index provides higher viscosities and greater film thickness at high temperatures
and lower viscosities at low temperatures for easy start-up.
Extreme Pressure (EP) additives protect gears operating in boundary lubrication regime and guard
against failures associated with heavy loading and severe operation.
Exhibit low foaming tendencies, high oxidation resistance, and provide excellent rust and corrosion
protection.
CITGO CITGEAR Synthetic EP Gear Lubricants have lower coeffecients of friction than
conventional mineral oils providing reduced energy consumption.
Higher heat transfer properties than conventional oils often results in cooler running machinery.
Compatible with essentially all commonly used elastomers, gaskets, seals such as nitrile, Buna N,
Viton, Teflon, polyethylene, flourocarbon, polyacrylate, epoxy, and PVC. They will not deteriorate
acrylic paints or lacquers.

APPLICATIONS: CITGO CITGEAR Synthetic EP Gear Lubricants are recommended for gears requiring EP protection,
for applications which experience a wide range of temperatures and where a long lasting fluid is
desired for extended drain intervals.
They are particularly recommended for lubricating industrial enclosed gears, sealed-for-life systems,
and heavily loaded plain or roller element bearings. With proper maintenance, useful service life
may be extended beyond that associated with mineral oils. They are recommended for splash, idler
immersion systems, forced drip and mechanical spray systems. No flushing or cleaning is required
when converting from mineral oils to these synthetic products. Consult owners manual for proper
lubricant selection.
______
CITGO and CITGEAR are registered trademarks of CITGO Petroleum Corporation. Viton is a registered trademark of DuPont
Dow Elastomers. Teflon is a registered trademark of DuPont.

(Continued)

(Continued)

C I T G O P e t r o l e u m C o r p o r a t i o n 8 0 0 / 2 4 8 - 4 6 8 4 H o u s t o n , Te x a s M a n u f a c t u r e d i n U S A
C10049
C10049

Click Here for Return to


PI Sheet Table of Contents
120
C
C II TT G
TYPICAL PROPERTIES:

C10049
GO

PI Sheet
C10049

Click Here for


O P
D(Continued)
CITGO CITGEAR SYNTHETIC EP GEAR LUBRICANTS
P

Grade 100 150 220 320 460 680


R

P ee tt rr oo ll ee uu m
m C
O

Material Code 632582001 632583001 632584001 632585001 632587001 632588001


L U B R I C A N T S
D

a t e 11 / 1 6 - ( C o n t i n u e d )

Specific Gravity 0.851 0.856 0.857 0.864 0.864 0.867


U

C I T G O C I T G E A R

API Gravity 34.7 33.8 33.6 32.3 32.3 32


Pounds Per Gallon 7.09 7.13 7.14 7.19 7.19 7.21


C

Viscosity, cSt at 40C 101.4 155 220 340 434 689


T

cSt at 100C 14.85 19.9 25.6 35.5 43.0 60.4


Viscosity Index 153 144 148 150 152 154
Brookfield at -40 58,800
I

Flash Point, F (C) 435 (224) 432 (222) 500 (260) 464 (240) 460 (238) 457 (236)
Pour Point, F (C) -71 (-57) -54 (-48) -54 (-48) -49 (-45) -44 (-42) -38 (-39)
N

121
Copper Corr 1B 1B 1B 1B` 1B 1B
F

Rust A/B Pass Pass Pass Pass Pass Pass

C oo rr pp oo rr aa tt ii oo nn 88 00 00 // 22 44 88 -- 44 66 88 44 H
S Y N T H E T I C

Demulsibility Pass Pass Pass Pass Pass Pass


O

Timken OK Load 65 65 75 75 75 75
Four Ball Weld, Kg 250 250 250 250 250 250
R

E P

Four Ball Wear at 40KG 00.35 0.35 0.35 0.35 0.35 0.35
at 20KG 0.31 0.31 0.29 0.29 0.29 0.29
M

Foam Test, Seq. I, II, III Pass Pass Pass Pass Pass Pass
A

Color L1.0 L1.0 L1.0 L1.0 L1.0 L1.0


AGMA Grade 3 EP 4 EP 5 EP 6 EP 7 EP 8 EP
T

US Steel 224 Pass Pass Pass Pass Pass Pass


I

SAE Grade 75W90


API Classfication GL-4
O

______
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
N

without notice.

Return to
H oo uu ss tt oo nn ,, TT e x a s M a n u f a c t u r e d i n U S A

Table of Contents
Industrial Gear Oils
P R O D U C T I N F O R M A T I O N
Industrial Gear Oils

C I T G O C I T G E A R
S Y N T H E T I C H T
L U B R I C A N T S
Date 06/15

DESCRIPTION: CITGO CITGEAR Synthetic HT Gear Lubricants are fully synthetic products designed for gear
applications operating at high temperatures and/or very low temperatures, severe conditions not
requiring extreme pressure (EP) load protection.

QUALITIES: Compared to conventional mineral oil based products, CITGEAR Synthetic HT lubricants offer
exceptionally low pour points and high viscosity indexes.
High viscosity index provides higher viscosities and protective film thickness at high operating
temperatures.
Excellent low temperature properties for easy fluid pumping and equipment start-up in extreme cold
environments.
Highly resistant to oxidation, provides rust and corrosion protection and low foaming tendencies.
Lower coefficients of friction than conventional mineral oils as determined in steel on steel
measurements, which provides energy savings potential.
Higher heat transfer properties than conventional mineral oils often results in cooler running
machinery.
Compatible with most conventional mineral oils.
Compatible with essentially all elastomers, gaskets, seals such as nitrile, Buna N, Viton, Teflon,
polyethylene, flourocarbon, polyacrylate, epoxy, and PVC. They will not deteriorate acrylic paints or
lacquers.

APPLICATIONS: CITGO CITGEAR Synthetic HT Lubricants are recommended for lubrication of industrial blowers
such as those manufactured by GE Energy (Roots), Gardner Denver, etc., and air and natural gas
compressors.
Note: CITGO CITGEAR Synthetic EP Gear Lubricants are recommended for gears requiring extreme
pressure protection.

CITGO and CITGEAR are registered trademarks of CITGO Petroleum Corporation. Viton is a registered trademark of
DuPont Dow Elastomers. Teflon is a registered trademark of DuPont.

(Continued)

(Continued)

CIT
CITGO PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10048C 1 0 0 4 8

Click Here for Return to


PI Sheet Table of Contents
122
D

CITGC

PI Sheet
Click Here for
OI T
PG
(Continued)
P

C10048C 1 0 0 4 8
R

e tOr oPl ee ut rmo l C


O

eu
TYPICAL PROPERTIES:
L U B R I C A N T S

om
D

CITGO CITGEAR SYNTHETIC HT LUBRICANTS


ate 06/15 - (Continued)
U

C I T G O C I T G E A R

Grade 68 100 150 220 320 460 680



C

Material Code 632571001 632572001 632573001 632574001 632575001 632577001 632579001

r p oCr oa rt pi oo nr a t i 8
o0
T

Specific Gravity 0.8465 0.8503 0.8549 0.8573 0.8588 0.8628 0.8657


API Gravity 35.6 35.0 34.0 33.6 33.2 32.5 31.9
Pounds Per Gallon 7.05 7.08 7.12 7.14 7.15 7.18 7.21
I

Viscosity, cSt at 40C 61.8 91.4 161.7 229 321 460 634
Viscosity, cSt at 100C 9.6 13.0 20.2 26.5 34.2 44.9 57.0
N

123
Viscosity Index 138 140 146 149 150 153 154
F

Flash Point, F (C) 561 (294) 550 (288) 565 (296) 554 (290) 554 (290) 540 (282) 572 (300)

n 0 / 284080- /4264884- 4 6 H
S Y N T H E T I C

Fire Point, F (C) 583 (306) 576 (302) 586 (308) 586 (308) 586 (308) 597 (314) 597 (314)
O

Pour Point F (C) -71 (-57) -65 (-54) -54 (-48) -49 (-45) -44 (-42) -44 (-42) -33 (-36)
Copper Corr 1A 1A 1A 1A 1A 1A 1A
R

H T

Rust A/B Pass Pass Pass Pass Pass Pass Pass


Demulsibility 40/40/0/15 40/40/0/15 40/40/0/10 40/40/0/15 40/40/0/15 40/40/0/10 40/40/0/15
M

Four Ball Wear at 40kg 0.31 0.32 0.31 0.30 0.30 0.32 0.32
at 20kg 0.21 0.21 0.21 0.20 0.23 0.22 0.24
A

Foam Test, Seq. I. II. III Pass Pass Pass Pass Pass Pass Pass
Color L1.0 L1.0 L1.0 L1.0 L1.0 L1.0 L1.0
T

8 4o us tHoonu, s Tt oe nx ,a sT e x M
AGMA Grade 2 3 4 5 6 7 8
I

a sa n u M
O

f aacdt e
N

Return to
u r iend Ui nS AU S A

Table of Contents
Industrial Gear Oils
P R O D U C T I N F O R M A T I O N
Industrial Gear Oils

C I T G O C I T G E A R
S Y N T H E T I C P A G
G E A R F L U I D S
Date 06/15

DESCRIPTION: CITGO CITGEAR Synthetic PAG (polyalkylene glycol) Gear Fluids are premium polyalkylene glycol
lubricants formulated to provide excellent performance in gear boxes, worm gears, bearings, blowers,
reciprocating compressors, and hydraulic systems beyond the capabilities of mineral oils.

QUALITIES: CITGO CITGEAR Synthetic PAG Gear Fluids offer:


Outstanding thermal and oxidative stability, and resistance to sludge and deposit formation.
High viscosity indexes and low pour points allow for a greater useable temperature range.
Low coefficients of friction, for potential energy savings.
Excellent heat transfer properites for cooler running machinery.
Multipurpose industrial equipment capability.
CITGO CITGEAR Synthetic PAG Gear Fluids are compatible with most seal materials in use today,
for best results contact your seal manufacturer.

APPLICATIONS: CITGO CITGEAR Synthetic PAG Gear Fluids are not miscible with mineral oils and should not be
used as make-up for systems filled with conventional mineral oils. Mineral oils should not be used as
top-off for systems which contain CITGEAR Synthetic PAG Gear Fluids. CITGEAR Synthetic PAG
fluids are hygroscopic and do not separate from water. As a result, water does not settle to the bottom
of the systems reservoir.
The CITGO CITGEAR Synthetic PAG Gear Fluids are designed for use in:
Heavy Duty Worm Gears
Plain and Rolling Contact Bearings
Industrial Enclosed Gears
High Temperature Paper Machine Bearings
Reciprocating and Rotary Screw Air and Natural Gas Compressors
Plastic Calendar Operations

TYPICAL PROPERTIES:

CITGO CITGEAR SYNTHETIC PAG GEAR FLUIDS

ISO GRADE 100 150 220 320 460

Material Code 632543001 632544001 632547001 632548001 632549001


Specific Gravity 1.046 1.047 1.05 1.056 1.057
Density, lb/gal 8.69 8.72 8.75 8.78 8.80
Viscosity, ASTM D 445, cSt at 40C 107.6 154.1 222.2 301.7 390.5
Viscosity, ASTM D 445, cSt at 100C 21.1 29.3 41.0 54.3 68.8
Viscosity Index, ASTM D 2270 223 232 239 247 253
Pour Point, ASTM D 97, F (C) -54 (-48) -49 (-45) -44 (-42) -44 (-42) -38 (-39)
Flash Point, ASTM D 92, F (C) 550 (288) 547 (286) 554 (290) 558 (292) 558 (298)
Rust Protection, ASTM D 665, A/B Pass Pass Pass Pass Pass
4-Ball Weld, ASTM D 4172, mm at 40kg 0.36 0.30 0.32 0.31 0.30

CITGO and CITGEAR are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10163C 1 0 1 6 3

Click Here for Return to


PI Sheet Table of Contents
124
P R O D U C T I N F O R M A T I O N

Industrial Gear Oils


C I T G O C I T G E A R
W T 3 2 0
Date 03/16

DESCRIPTION: CITGO CITGEAR WT 320 is a synthetic gear lubricant designed specifically for wind turbine gear
lubrication. CITGO CITGEAR WT 320 meets industrial gear oil standard DIN 51517-3.

QUALITIES: CITGO CITGEAR WT 320 offers:


Wear protection for gear and bearing components
Protection against micropitting
High viscosity index (VI) for wide temperature performance
Oxidation stability and rust/corrosion protection
Suppression of foam and air/oil dispersion
Seal compatibility per DIN 51517-3 and ISO 1817(Flender)

CITGO CITGEAR WT 320 is recommended for wind turbine gear lubrication and can also be used in
APPLICATIONS:
industrial gear applications requiring extreme pressure (EP) protection, operating under a wide range
of temperatures, and where a long lasting fluid is desired.

Approved for:
Flender gear units by Siemens MD (Rev.15)Approval No. A-CI-20160208
Field testing in wind turbines by Winergy and Moventas
FAG Schaeffler bearings in wind turbines (passed 4 step test)

TYPICAL PROPERTIES:

CITGO CITGEAR WT 320

ISO VISCOSITY GRADE 320

Material Code 632604001

Gravity, ASTM D4052, API 27.3


Density, lb/gal at 60F 7.42
Flash Point, COC, ASTM D92, F (C) 210 (410)
Viscosity:
ASTM D445, cSt at 40C 328
ASTM D445, cSt at 100C 38.2
Viscosity Index, ASTM D2270 167
Pour Point, ASTM D97, F (C) -27 (-33)
Color, ASTM D1500 L1.0
Foam Test, ASTM D892, Seq. I, II, III 0-0, 10-0, 0-0
Water Separability, @180 F, ASTM D1401 40/40/0/30
Former AGMA Grade 6 EP

CITGO and CITGEAR are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

C I T GCOI TPGeO
t r oPl ee tur m
o l eCuomr p C
o roar tpi oo rna t i o8n0 0 / 28 40 80 -/ 42 64 8 4- 4 6 8H4o u sHt oo nu ,s tToenx, a Ts ex aMsa n
uMf aa cd teu ri en d Ui Sn AU S A
C10236
C10236

Click Here for Return to


PI Sheet Table of Contents
125
P R O D U C T I N F O R M A T I O N
Industrial Gear Oils

C I T G O C I T G E A R
X C O O I L S
Date 06/15

DESCRIPTION: CITGO CITGEAR XCO Oils are premium lubricants that provide excellent bearing and gear lubrication
performance in steel industry applications such as high speed rod mills.

BENEFITS: CITGO CITGO CITGEAR XCO Oils are formulated with high quality paraffinic base oils and additive
systems that assure:
Excellent oil/water separation which allow water removal from gear and bearing systems
High level of wear protection for critical machinery
Outstanding rust and corrosion protection in wet environments
Excellent oxidation stability for long service life
Premium anti-foam properties
High thermal stability minimizes formation of heat related sludge and varnishes

APPLICATIONS: CITGO CITGEAR XCO Oils are recommended for use in high speed rod mill circulation systems and
other gear and bearing lubrication applications. CITGO CITGEAR XCO Oils are recommended for use
in Danieli and Morgan (Siemens AG) high speed rod mills.

TYPICAL PROPERTIES:

CITGO CITGEAR XCO OILS

Grade 100 220 320 460

Material Code 631100001 631102001 631103001 631104001

Gravity, ASTM D 4052, API 30.3 27.3 26.7 26.2


Density, lb/gal at 60 F 7.3 7.4 7.4 7.5
Flash Point, ASTM D 92, COC,
F (C) 482 (250) 522 (272) 561 (294) 554 (290)
Viscosity, ASTM D 445,
cSt at 40C 92 220 320 447
cSt at 100C 10.7 18.6 23.8 29.7
Viscosity Index, ASTM D 2270 100 94 94 95
Pour Point, ASTM D 97, F (C) -6 (-21) 10 (-12) 10 (-12) 10 (-12)
Color, ASTM D 1500 L1.0 L4.0 L4.0 L5.0
Rust Test, ASTM D 665 A and B Pass Pass Pass Pass
Water Separation, ASTM D 1401
at 180F (ml Emulsion at
30 minutes) 3.0 Max. 3.0 Max. 3.0 Max. 3.0 Max.
Foam Test, ASTM D 892,
Sequence I, II, III Pass Pass Pass Pass
Four Ball Wear, ASTM D 4172
mm @ 20 kg 0.38 0.34 0.37 0.30

CITGO and CITGEAR are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.

C I T GC
O I TPG
eOt r oPl ee ut rmo l C
e uo m
r p oCroartpi oo nr a t i o8 n0 0/ 284080-/4264884- 46 8H4o u s H
t oonu, s T
t oenx,a sT e x a
Msa n uM
f aacdt eu r iend Ui S
n AU S A
C10142C 1 0 1 4 2

Click Here for Return to


PI Sheet Table of Contents
126
P R O D U C T I N F O R M A T I O N

Industrial Gear Oils


C I T G O E P C O M P O U N D S
Date 10/15

DESCRIPTION: CITGO EP Compounds are designed for industrial gear lubrication extra-duty service in a wide variety
of applications where extreme pressure load conditions prevail.

BENEFITS: CITGO EP Compounds are formulated with highly refined base stocks and select ashless additives
to assure premium extreme pressure properties and provide effective lubrication under most service
conditions.
These products can be used in mist lubrication systems and allow directed delivery of the oil and
control of stray mist.
CITGO EP Compounds have a high viscosity index, excellent demulsibility, solution stability and
thermal stability properties. They also provide excellent resistance to oxidation and foaming and
are noncorrosive.

APPLICATIONS: CITGO EP Compounds have been formulated to meet recognized industrial gear oil requirements
including:
DIN 51517 Part 3 CLP
US Steel 224
AGMA 9005-E02
ISO 12925-1 CKC/CKD
David Brown S1.53.101 (E)
GM LS2 EP Gear Oil
Fives Group Machine Gear Oil
They are recommended for lubrication of plain and antifriction bearings and gear drives that operate
under extra-heavy-duty conditions.
These lubricants can be applied via misting systems and are suitable for use in bearing oil
circulating systems.
Typical applications are steel mills, rubber mills, and similar heavy industries where ambient
conditions include water, dirt, and scale.
CITGO EP Compounds are formulated for the lubrication of industrial spiral bevel, helical, spur and
herringbone gears. They are especially well-suited for use in multiple gear drives that operate at
greatly increased pressure between the surfaces of the gear teeth or where severe shock or heavy
loads are encountered.

NOTE: Consult your owners manual for proper lubricant selection.

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

(Continued)
(Continued)

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10047C 1 0 0 4 7

Click Here for Return to


PI Sheet Table of Contents
127
Industrial Gear Oils

CCI T

PI Sheet
Click Here for
(Continued)
C I T G O

TYPICAL PROPERTIES:
P

C10047C 1 0 0 4 7
CITGO EP COMPOUNDS
R

Grade 68 100 150 220 320 460 680 800


E P
O

Material Code 631110001 631120001 631130001 631140001 631150001 631170001 631180001 631181001
Gravity, ASTM D4052, API 30.6 30.2 28.0 27.5 27.0 26.3 26.8 24.0
D

Density, lb/gal at 60F 7.27 7.29 7.39 7.41 7.43 7.47 7.49 7.6
ate 10/15 - (Continued)

Flash Point, COC,


U

ASTM D92, F (C) 464 (240) 482 (250) 509 (265) 491 (255) 500 (260) 491 (255) 572 (300) 482 (250)
Viscosity:
C

ASTM D445, cSt at 40C 67.5 97 147.5 215 314 435 639 805
ASTM D445, cSt at 100C 8.6 11.0 14.5 18.5 23.9 30.6 35.8 43.6
T

Viscosity Index, ASTM D2270 99 97 95 94 96 96 90 95


Pour Point, ASTM D97, F(C) 5 (-15) 5 (-15) 5 (-15) 5 (-15) 5 (-15) 5 (-15) 15 (-9) 15 (-9)

I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2


Color, ASTM D1500 1.0 2.5 3.0 3.0 3.5 4.0 D8.0 4.5
C O M P O U N D S

Copper (Cu) Corrosion,


I

ASTM D130(1) 1B 1B 1A 1B 1A 1A 2C 2C
Demulsibility, ASTM D2711B
N

128
Water in Oil, % 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0
Total Free Water, mL 80 80 80 80 80 80 80 80
F

Emulsion, mL 1.0 1.0 1.0 1.0 1.0 2.0 2.0 2.0


Oxidation Test(2) Pass Pass Pass Pass Pass Pass Pass Pass
O

Rust Test, ASTM D665A & B Pass Pass Pass Pass Pass Pass Pass Pass
Timken OK Load,

/ 24488- -44668844 HHoouus st o


R

ASTM D2782, lbs. 65 70 85 65 70 75 70 70


Four Ball EP Test, Weld,
ASTM D2783, kg 315 315 315 315 315 315 315 315
M

Four Ball Wear at 20 kg,


ASTM D4172, mm 0.29 0.30 0.29 0.23 0.21 0.20 0.35 0.35
A

Foam Test, ASTM D892,


Seq. I, II, III Pass Pass Pass Pass Pass Pass Pass Pass
T

ISO VG No. 68 100 150 220 320 460 680 Between


I

680-1000
AGMA Grade 2 EP 3 EP 4 EP 5 EP 6 EP 7 EP 8 EP Between

t onn, , TTeex xaas s MMaannuuf a


8 & 8A EP
O

Fives Cincinnati P-63 P-76 P-77 P-74 P-59 P-35

f ac ct u
U.S. Steel Req. No. 224 Meets Meets Meets Meets Meets Meets
N

Notes: (1) Three hours at 212F.


(2) Per U.S. Steel Requirement No. 224 (ASTM D2893, 312 hrs. at 99C).
______

Return to
CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the

t ur reedd i ni n UUSSAA

Table of Contents
property of their respective owners.
P R O D U C T I N F O R M A T I O N

Industrial Gear Oils


C I T G O E P G E A R S E M I S Y N T H E T I C 6 8
Date 6/15

DESCRIPTION: CITGO EP Gear Semi Synthetic 68 is designed for severe service in a wide variety of extreme
pressure industrial applications.

BENEFITS: Blended with synthetic components, severely hydrotreated base stocks and ashless additives.
Provides excellent extreme pressure properties and anti-wear characteristics.
CITGO EP Gear Semi Synthetic 68 has a high viscosity index, excellent demulsibility, solution stability
and thermal stability. Provides excellent resistance to oxidation and foaming and is noncorrosive.

APPLICATIONS: Recommended for lubrication of plain and antifriction bearings and gear drives that operate under
extra-heavy-duty conditions. Formulated for the lubrication of industrial spiral bevel, helical, spur and
herringbone gears.

DIN 515 17 Part 3


US Steel 224
AGMA 9005-E02
ISO 12925-1 CKC/CKD
David Brown S1.53.101
GM LS 2 EP Gear Oil
Fives Cincinnati Machine Gear

TYPICAL PROPERTIES:

CITGO EP GEAR SEMI SYNTHETIC 68

ISO Viscosity Grade 68

Material Code 631060001

Gravity, ASTM D 4052, API 30.7


Density, lb/gal at 60F 7.27
Flash Point, COC, ASTM D 92, F (C) 195 (383)
Viscosity:
ASTM D 445, cSt at 40C 66.0
ASTM D 445, cSt at 100C 8.6
Viscosity Index, ASTM D 2270 100
Pour Point, ASTM D 97, F(C) -21 (-30)
Color, ASTM D 1500 0.5
Rust Test, ASTM D 665A & B Pass
Timken OK Load, ASTM D 2782, lbs. 65
Four Ball EP Test, Weld 315
Four Ball Wear at 20 kg. 0.29
Foam Test, ASTM D 892, Seq. I, II, III 0-0, 0-0, 0-0
ISO VG No. 68
AGMA Grade 2 EP

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10202C 1 0 2 0 2

Click Here for Return to


PI Sheet Table of Contents
129
P R O D U C T I N F O R M A T I O N
Industrial Gear Oils

C I T G O M G X F L U I D
Date 06/15

DESCRIPTION: CITGO MGX Fluid is a water emulsifying gear/transmission lubricant formulated with highly
refined paraffinic base oils. It is specifically designed to satisfy the performance requirements
of Joy Technologies, Inc. transmission oil specification TO-HD.

APPLICATIONS: Recommended for use in Joy Technologies, Inc. transmissions or other applications where a gear/
transmission oil that provides lubrication while emulsified with water is required.

CITGO MGX Fluid is formulated to provide:


Anti wear/extreme pressure performance
Corrosion protection
Anti foam properties
Low temperature fluidity

TYPICAL PROPERTIES:

CITGO MGX FLUID

Material Code 631360001

ISO Grade 460


AGMA Grade 7EP
API Gravity 26.6
Viscosity, cSt at 100C 29.1
cSt at 40C 443
Viscosity Index, ASTM D 2270 93
Flash Point, COC, F (C) 496 (258)
Pour Point, F (C) 10 (-12)
Color ASTM D 1500 4.0
Falex EP, D3233B, lb. 4000
Copper Corrosion, 3 hrs. at 250F 1B
Rust Protection, A & B Pass
Foaming, D892 Pass

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10156C 1 0 1 5 6

Click Here for Return to


PI Sheet Table of Contents
130
P R O D U C T I N F O R M A T I O N

Industrial Gear Oils


C I T G O P A C E M A K E R
S D O I L S
Date 06/15

DESCRIPTION: CITGO Pacemaker SD Super Demulsibility Oils are high quality circulating lubrication oils, with
superior oil/water separation characteristics, oxidation stability, and rust and corrosion protection
specifically designed for steel mill applications. Available in viscosity grades 220, 320, 460 and 680.
CITGO Pacemaker Oils exceed Siemens AG requirements for Morgoil Advanced Bearing Lubricant
Super Demulsibility specification.

QUALITIES: CITGO Pacemaker SD Oils are formulated to provide:


Outstanding water removal characteristics
Long service life in circulating systems
Corrosion protection and foam control
Excellent filterability
Deposit control

APPLICATIONS: CITGO Pacemaker SD Oils are recommended for circulating systems requiring AGMA R&O type
lubricants operating in severe conditions such as water contamination. These products allow rapid
oil separation from water at steel mill operating temperatures, especially in Morgan Construction
Company steel mill roll bearings.
CITGO Pacemaker SD Oils can be used as:
Gear oils
Compressor oils
Rust/oxidation inhibited (R&O) oils
Roll bearing lubricant (blooming, slabbing, hot and cold strip mills)
Morgoil lubrication system oils
MESTA system oils
______
Morgoil and MESTA are registered trademarks of Siemens AG.

(Continued)

C I T GC
O I TPG
eOt r oPl ee ut rmo l C
e uo m
r p oCroartpi oo nr a t i o
8n0 0/ 284080-/4264884- 46 8
H 4o u s H
t oonu, s T
t oenx ,a sT e x M
a sa n u M
f aacdt eu r iend Ui n
S AU S A
C10053C 1 0 0 5 3

Click Here for Return to


PI Sheet Table of Contents
131
P R O D U C T I N F O R M A T I O N
Industrial Gear Oils

C I T G O P A C E M A K E R
S D O I L S
(Continued)
Date 06/15 - (Continued)

TYPICAL PROPERTIES:

CITGO PACEMAKER SD OILS

Grade 220 320 460 680

Material Code 633044001 633045001 633047001 633050001

Gravity, ASTM D 4052, API 28.2 28.2 27.6 26.6


Density, lb/gal 7.37 7.37 7.41 7.45
Flash Point, ASTM D 92, COC, F (C) 464 (240) 464 (240) 554 (290) 554 (290)
Viscosity:
ASTM D 445, cSt at 40C 220 320 460 676
ASTM D 445, cSt at 100C 18.7 23.7 30.3 39.3
Viscosity Index, ASTM D 2270 95 96 96 96
Pour Point, ASTM D 97, F (C) 0 (-18) 5 (-15) 5 (-15) 5 (-15)
Color, ASTM D 1500 4.0 4.0 4.5 4.5
Rust Test, ASTM D 665 A Pass Pass Pass Pass
Demulsibility, ASTM D 2711
(ml Emulsion at 125F) 1.0 max. 1.0 max. 1.0 max. 1.0 max.
Water Separation, ASTM D 1401 at 180F
(ml Emulsion at 40 minutes) 3.0 max. 3.0 max. 3.0 max. 3.0 max.
Foam Test, ASTM D 892, Seq. I, II, III Pass Pass Pass Pass
AGMA Grade 5 6 7 8

CITGO and Pacemaker are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10053C 1 0 0 5 3

Click Here for Return to


PI Sheet Table of Contents
132
P R O D U C T I N F O R M A T I O N

C I T G O A R S L U S H I N G O I L
Date 06/15

DESCRIPTION: CITGO AR Slushing Oil is a light colored, low viscosity rust preventative coating oil. It utilizes a highly
effective metal protection system to provide excellent rust protection for steel stored for intermediate
periods under cover. The light viscosity promotes complete surface coverage and quick drainage of
excess oil. The low pour point facilitates cold weather storage and handling.

Metalworking Fluids
TYPICAL PROPERTIES:

CITGO AR SLUSHING OIL

Material Code 639760001

Gravity, API 32.3


Density, lb/gal 7.19
Flash Point, PM 360
Flash Point, COC 392
Fire Point, COC 437
Viscosity, cSt at 40C 18
cSt at 100C 3.8
SUS at 100F 95
SUS at 210F 39
Viscosity Index 98
Carbon Residue, WT% 0.04
Color, ASTM D 1500 0.5
Pour Point, F -35
Copper Corrosion 1A
Turbine Oil Rust Test, Salt Water Pass
Humidity Cabinet Test, hrs. 900+

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10180C 1 0 1 8 0

Click Here for Return to


PI Sheet Table of Contents
133
P R O D U C T I N F O R M A T I O N

C I T G O A U T O K U T
A S S E R I E S
Date 06/15

DESCRIPTION: CITGO Autokut AS Series are transparent, highly active metal removal fluids designed for severe
machining operations. Citgo Autokut AS series is available in four different viscosity grades to meet
the requirements of a modern engineering facility.

FEATURES: Contains active sulfur and other anti-weld components


Metalworking Fluids

High levels of lubricity


Low odor
Chlorinated paraffin free
Light in color
Contains a stable oil mist suppressant

BENEFITS: Improved productivity and lower costs of operation


Excellent surface finish at high feeds and speeds
Improved worker acceptability
Reduction in disposal costs and reduced risk of rust
Aids visibility of operation
Improves working environment and worker safety by minimizing
mist formation
NOTE: Not recommended for yellow or non-ferrous metals

APPLICATIONS: CITGO Autokut AS Series are formulated for machining operations


involving alloyed, stainless and chrome steels. These products are
intended for severe machining operations such as broaching, tapping
and cold-heading. Lower viscosity grades are used for higher speed
lighter duty applications and higher viscosity is used for slower speed
heavier duty operations.

Material Compatibility
Recommended Highly Recommended
P - Steels
M - Stainless Steel
K - Cast Iron

(Continued)

(Continued)

CIT
CITGO PGe tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, sTt oe nx ,a sT e x M
a sa n u M
f aacdt u
ere
i nd Ui nS AU S A
C10167C 1 0 1 6 7

Click Here for Return to


PI Sheet Table of Contents
134
P R O D U C T I N F O R M A T I O N

C I T G O A U T O K U T
A S S E R I E S
Date 06/15 - (Continued)
(Continued)

TYPICAL PROPERTIES - CITGO AUTOKUT AS SERIES

Grade AS 15 AS 32 AS 46 AS 68
Material Code 639430001 639432001 639433001 639434001
Gravity, ASTM D 4052, API 33.6 31.1 29.7 28.2

Metalworking Fluids
Gravity, Specific, ASTM D 1298, 60/60 F 0.857 0.870 0.878 0.886
Density, lb/gal 7.2 7.3 7.3 7.4
Flash Point, COC, ASTM D 92, F (C) 349 (176) 363 (184) 356 (180) 356 (180)
Viscosity, cSt at 40C 16.6 30.7 45.5 65.4
cSt at 100C 3.8 5.6 7.1 8.9
SUS at 100F 89 158 245 338
SUS at 210F 39 45 50 56
Color, ASTM D 1500 1.0 1.5 1.5 1.5
Pour Point, ASTM D 97, F (C) -45.4 (-43) -22 (-30) -14.8 (-26) -14.8 (-26)
Copper Corrosion, ASTM D 130, 3 hrs at 212F 4 4 4 4
Active Sulfur Yes Yes Yes Yes
Phosphorus No No No No
Lubricity Additive Yes Yes Yes Yes

CITGO and Autokut are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their
respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10167C 1 0 1 6 7

Click Here for Return to


PI Sheet Table of Contents
135
P R O D U C T I N F O R M A T I O N

C I T G O A U T O K U T
I S S E R I E S
Date 06/15

DESCRIPTION: CITGO Autokut IS Series are non-staining metal removal oils designed for machining non-ferrous
metals and many ferrous metals. CITGO Autokut IS Series are available in two viscosity grades to
meet the requirements of a modern engineering facility. The lower viscosity grade is used for higher speed
lighter duty applications and the higher viscosity is used for slower speed heavier duty operations.
Metalworking Fluids

FEATURES: Excellent lubricity and mild EP


Compatible with all metals
Chlorine free
Light in color
Contain a stable oil mist suppressant

BENEFITS: Improved productivity and lower costs of operation


Non staining on ferrous and non-ferrous metals
Benefits environmental needs and reduces disposal costs
Light color aids visibility of operation
Improves working environment and worker safety by minimizing
mist formation

APPLICATIONS: CITGO Autokut IS 15 is a low viscosity oil, primarily recommended for


all machining operations on aluminum and magnesium and their alloys.
This light viscosity product has additional applications in deep drilling
and the honing of steel, cast iron and alloyed copper.

CITGO Autokut IS 46 is designed for more severe duty applications


and contains a high level of non-staining extreme pressure agent to
permit its use over a wide variety of materials, and over a wide range
of cutting depths, feeds and speeds. It can also be used in turning,
sawing, milling and drilling of non-ferrous metals as well as some plain
carbon steels and free-machining steel alloys.

Material Compatibility
Recommended Highly Recommended
P - Steels
M - St
S
Stainless
tainles
tainlesssS
Steel
K - Cast Iron
N - Non-ferrous

(Continued)

(Continued)

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10056C 1 0 0 5 6

Click Here for Return to


PI Sheet Table of Contents
136
P R O D U C T I N F O R M A T I O N

C I T G O A U T O K U T
I S S E R I E S
D ate 06/15 - (Continued)
(Continued)

TYPICAL PROPERTIES - CITGO AUTOKUT IS SERIES

Grade IS 15 IS 46
Material Code 639440001 639443001
Gravity, ASTM D 4052, API 31.9 31.1

Metalworking Fluids
Gravity, Specific, ASTM D 1298, 60/60F 0.866 0.870
Density, lb/gal 7.1 7.3
Flash Point, COC, ASTM D 92, F (C) 361 (183) 428 (220)
Viscosity, cSt at 40C 18 45
cSt at 100C 3.9 6.9
SUS at 100F 95 230
SUS at 210F 39 49
Color, ASTM D 1500 0.5 0.5
Pour Point, ASTM D 97, F (C) -44 (-42) -6 (-21)
Copper Corrosion, ASTM D 130, 3 hrs at 212F 1 A/B 1 A/B
Active Sulfur No No
Phosphorus No No
Lubricity Additive Yes Yes

CITGO and Autokut are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10056C 1 0 0 5 6

Click Here for Return to


PI Sheet Table of Contents
137
P R O D U C T I N F O R M A T I O N

C I T G O A U T O K U T
E X T R U S I O N O I L
Date 06/15

DESCRIPTION: CITGO Autokut Extrusion Oil is a heavy duty fluid designed for a variety of metal forming and other
metalworking operations.

FEATURES: Contains advanced lubrication and anti-weld components


Compatible with all metals
Residues are easily cleaned
Metalworking Fluids

High viscosity
Free of chlorinated components

BENEFITS: Benefits environmental needs and reduces disposal costs


Improved productivity and lower costs of operation, improving surface
finish and extending tool life
Non staining on ferrous and non-ferrous metals
Conventional cleaners can be used to remove unwanted residues
Oil remains in the areas intended during the operation process

APPLICATIONS: CITGO AutoKut Extrusion Oil is formulated for a variety of drawing,


stamping, forming and extrusion applications over a wide range of
machining applications and metallurgies.
Material Compatibility
Recommended Highly Recommended
P - Steels
M-S Stainless
tai
taiinle
ess
sSSteel
K - Cast Iron
N - Non-ferrous

TYPICAL PROPERTIES - CITGO AUTOKUT EXTRUSION OIL


Material Code 639451001
Gravity, ASTM D 4052, API 23.9
Gravity, Specific, ASTM D 1298, 60/60 F 0.910
Density, lb/gal 7.6
Flash Point, COC, ASTM D92, F (C) 432 (222)
Viscosity, ASTM D 445, cSt at 40C 117.7
cSt at 100C 15.3
ASTM D 2161, SUS at 100F 546
SUS at 210F 79
Color, ASTM D 1500 7.0
Pour Point, ASTM D 97, F (C) 15.8 (-9)
Copper Corrosion, ASTM D 130, 3 hrs at 212F 1 A/B
Active Sulfur No
Phosphorus No
Lubricity Additive Yes

CITGO and Autokut are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, sTt oe nx ,a sT e x M
a sa nu M
f aacdt u
ere
i nd Ui nS AU S A
C10186C 1 0 1 8 6

Click Here for Return to


PI Sheet Table of Contents
138
P R O D U C T I N F O R M A T I O N

C I T G O A U T O K U T
T R I - P U R P O S E
Date 06/15

DESCRIPTION: CITGO Autokut Tri-Purpose is a transparent, non-corrosive, multi-purpose cutting oil. It is equally
effective for use as a cutting oil and as a lubricant in screw machines and other automatic type
machine tools.

FEATURES: Tri-functional, can be used as a gear lubricant, cutting oil and

Metalworking Fluids
hydraulic fluid
Contains a stable oil mist suppressant
Contains advanced lubrication and anti-weld components
Compatible with all metals
Chlorine free
Light in color
Premium rust and oxidation protection

BENEFITS: Tri-functionality reduces costs by consolidating inventory and


minimizing cross-contamination risks
Improves working environment and worker safety by minimizing
mist formation
Improves productivity and lower costs of operation, with improved tool
life and surface finish
Non staining on ferrous and non-ferrous metals
Benefits environmental needs and reduces disposal costs
Aids visibility of operation
Versatility in gear and hydraulic applications

APPLICATIONS: CITGO Autokut Tri-Purpose is a cutting oil, hydraulic fluid and a gear lubricant. It is specifically
designed for automatic screw machines and is recommended for machining non-ferrous metals
and ferrous alloys having machinability rating of approximately 50% or higher. It can be used in all
automatic screw machines and in similar equipment for: Drilling, Counter-Boring, Turning, Shaving,
Reaming, Tapping, Forming and Stamping.

Material Compatibility
Recommended Highly Recommended
P - Steels
M - St
S
Stainless
tainless
ess S
Steel
K - Cast Iron
N - Non-ferrous

CUTTING HYDRAULIC

GEAR

(Continued)
Multi-use Fluid (Continued)

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10059C 1 0 0 5 9

Click Here for Return to


PI Sheet Table of Contents
139
P R O D U C T I N F O R M A T I O N

C I T G O A U T O K U T
T R I - P U R P O S E
D ate 06/15- (Continued)
(Continued)

TYPICAL PROPERTIES - CITGO AUTOKUT TRI-PURPOSE

Material Code 639450001


Gravity, ASTM D 4052, API 32.5
Gravity, Specific, at 60F, ASTM D 1298 0.863
Metalworking Fluids

Density, lb/gal 7.2


Flash Point, ASTM D 92, F (C) 406 (208)
Viscosity, ASTM D 445, cSt at 40C 29.8
cSt at 100C 5.3
ASTM D 2161, SUS at 100F 154
SUS at 210F 44
Color, ASTM D 1500 2.5
Pour Point, ASTM D 97, F (C) -38 (-39)
Copper Corrosion, ASTM D 130, 3 hrs at 210F 1 A/B
Active Sulfur No
Phosphorus No
Lubricity Additive Yes

CITGO and Autokut are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their
respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10059C 1 0 0 5 9

Click Here for Return to


PI Sheet Table of Contents
140
P R O D U C T I N F O R M A T I O N

C I T G O C I T C O O L
3 3 C O N C E N T R A T E
Date 06/15

DESCRIPTION: CITGO CITCOOL 33 Concentrate is a heavy-duty synthetic coolant designed to be diluted in water to
the proper concentrations to afford excellent operations in high-performance machining.

FEATURES: Balanced lubricity and boundary lubrication components


Readily soluble in water

Metalworking Fluids
Oil free
Distinct transparent green
Fully synthetic
Contains effective bactericide and fungicide
Rejects tramp oil

BENEFITS: Improves tool life and surface finish with enhanced EP and wear protection
Easy mixing and clean up, and improved solution stability even in harder water
Odor and rancidity free, no gummy residues, and eliminates oil mists in the
workplace
Good work piece visibility
Superior heat transfer to improve tool life and part tolerances Concentrate Diluted
with Water
Inhibits initial bacterial and fungal growth in service
Tramp oils are readily removed; eliminating a source for bacteria and fungus to grow, resulting in no
rancid ordors and extending sump life

APPLICATIONS: CITGO CITCOOL 33 Concentrate is designed primarily for use in machining titanium, ferrous metals,
and their alloys, and stainless steel. It is non-corrosive to brass and copper so also recommended for
these metals.

Material Compatibility
Recommended Highly Recommended
P - Steels
M - Stainless Steel
*Not recommended for aluminum, magnesium and their alloys due
d to possible staining.
n

Refractometer Chart
5.0
4.5
4.0
3.5
Refractometer Reading

3.0
2.5
2.0
1.5
1.0
0.5
0
0 2 4 6 8 10 12
Concentration (Continued)
(Continued)
Refractometer Reading at 10% = 3.9 oBrix
Refractometer Factor = 2.56
CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10057C 1 0 0 5 7

Click Here for Return to


PI Sheet Table of Contents
141
P R O D U C T I N F O R M A T I O N

C I T G O C I T C O O L
3 3 C O N C E N T R A T E
(Continued)
D ate 06/15 - (Continued)
TYPICAL PROPERTIES - CITGO CITCOOL 33 CONCENTRATE
Material Code 639333001
Appearance, Concentrate (neat) Clear, Green
Dilution (5% in DI water) Clear, Green(1)
Gravity, Specific, ASTM D1298, 60/60F 1.07
Density, lb/gal 8.9
Metalworking Fluids

Viscosity, ASTM D 445, cSt at 40C 3.7


ASTM D 2161, SUS at 100F 17
pH, Concentrate 9.5
Falex Load, 5% in tap water, ASTM D 3233, lbs. 4500
Rust Test, 3% in tap water, ASTM D 4627 Pass
Solution Stability (5%), 24 hrs. at 30F No Separation
Copper Corrosion (5%), 3 hrs. at 122F, ASTM D 130 1B
Foam Test, ASTM D 892, Seq. I 90-0
Seq. II 10-0
Seq. III 20-0
Note: 1) Dilute solutions can be hazy if tap water STORAGE, HANDLING AND SPECIAL CONSIDERATIONS:
is used depending upon water hardness. Preferred storage is indoors away from sun and heat. Do not allow to
freeze. Under long term storage, product may discolor.
METAL MACHINABILITY GROUPS(1)
1 2 3 4
Non-Ferrous, Nickel Alloys, Stainless Steels, Titanium Alloys, High
Soft Metals(2) Nitralloy Steels, Monel Metals, Tensile Nickel Alloys,
Cast Irons and Cast Irons and Austentic Stainless
Alloy Steels (up to Alloy Steels Steels, Tool Steel
200 Brinell) (200 to 300 Brinell) and High Tensile
Alloy Steels (300 to
Machining Operation 400 Brinell)
Turning, Boring, Milling, 5-7% 5-7% 7-9% 7-9%
Forming, Drilling, Sawing

Tapping, Thread Rolling, 5-7% 5-7% 8-10% 8-10%


Reaming, Screw Cutting,
Broaching

Gear Shaping, Form and 5-7% 5-7% 8-10% 8-10%


Thread Milling, Shaving,
Hobbing, and Trepanning

Internal and External 5-7% 5-7% 5-7% 5-7%


Grinding, Form and
Thread Grinding

Stamping 10% 10% 20% 20%


Notes: (1) Dilution ratios shown are approximate and may require higher or lower water concentrations depending on a number of factors including the
type of metal cut, machine speed, the severity of the operation, metal hardness, etc.
(2) CITCOOL 33 is not recommended for machining aluminum alloys or magnesium (due to possible staining).

CITGO and CITCOOL are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of
their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10057C 1 0 0 5 7

Click Here for Return to


PI Sheet Table of Contents
142
P R O D U C T I N F O R M A T I O N

C I T G O C I T C O O L
S S - G P
Date 06/15

DESCRIPTION: CITGO CITCOOL SS-GP is a general purpose, semi-translucent, low oil content, semi-synthetic fluid
designed for dilution in water to produce a metalworking coolant for use in a variety of general
machining operations.

FEATURES: Forms stable emulsions in various water hardness up to 1000ppm

Metalworking Fluids
Low foaming tendencies
Low oil content
Free of chlorine, secondary amines, phenols, nitrates, PCBs, and
heavy metals

BENEFITS: Product performance is constant and machine remains clean


Reliable in-service performance especially in higher pressure coolant
delivery systems
Longer sump life
Ease of disposal and friendly work environments

APPLICATIONS: CITGO CITCOOL SS-GP is recommended for light-duty, general


machining including thread cutting and forming, deep hole drilling Concentrate Diluted
with Water
and boring, reaming, and grinding of cast irons, ferrous alloys and
stainless steel.

Material Compatibility
Recommended Highly Recommended
P - Steels
K - Cast Iron

*Not recommended for aluminum and copper alloys.

Refractometer Chart
Refractometer Reading

6
5
4
3
2
1
0
0 2 4 6 8 10 12
Concentration

Refractometer Reading at 10% = 4.5 oBrix


Refractometer Factor = 2.22

(Continued)
(Continued)

CITGO PG
CIT e tOr oPl eeut rmo l C
euom
r p oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10188C 1 0 1 8 8

Click Here for Return to


PI Sheet Table of Contents
143
P R O D U C T I N F O R M A T I O N

C I T G O C I T C O O L
S S - G P
D ate 06/15 - (Continued)
(Continued)

TYPICAL PROPERTIES - CITGO CITCOOL SS-GP

Material Code 639334001


Appearance, Concentrate (neat) Yellow Fluid
Dilution (5% in DI water) Semi-Translucent
Metalworking Fluids

Gravity, Specific, ASTM D 1298, 60/60F 1.01


Mineral Oil Content % 10
pH at 3% concentration 9.4
Defoaming mL (5% in 50 ppm water) Nil (20 sec.)

METAL MACHINABILITY GROUPS(1)


1 2 3 4
Non-Ferrous, Nickel Alloys, Stainless Steels, Titanium Alloys, High
Soft Metals(2) Nitralloy Steels, Monel Metals, Tensile Nickel Alloys,
Cast Irons and Cast Irons and Austentic Stainless
Alloy Steels (up to Alloy Steels Steels, Tool Steel
200 Brinell) (200 to 300 Brinell) and High Tensile
Alloy Steels (300 to
Machining Operation 400 Brinell)
Turning, Boring, Milling, 5-7% 5-7% 8-10% 8-10%
Forming, Drilling, Sawing

Tapping, Thread Rolling, 5-7% 5-7% 8-10% 8-10%


Reaming, Screw Cutting,
Broaching

Gear Shaping, Form and 5-7% 5-7% 8-10% 8-10%


Thread Milling, Shaving,
Hobbing, and Trepanning

Internal and External 5-7% 5-7% 5-7% 5-7%


Grinding, Form and
Thread Grinding

Stamping 10-20% 10-20% 10-20% 10-20%


Notes: (1) Dilution ratios shown are approximate and may require higher or lower water concentrations depending on a number of factors including the
type of metal cut, machine speed, the severity of the operation, metal hardness, etc.
(2) CITCOOL SS-GP is not recommended for machining aluminum alloys or magnesium (due to possible staining).

CITGO and CITCOOL are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10188C 1 0 1 8 8

Click Here for Return to


PI Sheet Table of Contents
144
P R O D U C T I N F O R M A T I O N

C I T G O C I T C O O L
S S - H D
Date 06/15

DESCRIPTION: CITGO CITCOOL SS-HD is a water extendable semi-synthetic coolant recommended for heavy-duty
applications. The product is suitable for job shops where one coolant is needed to machine a variety
of metals in multiple operations.

FEATURES: Forms stable emulsions in various water hardness up to 1000ppm

Metalworking Fluids
Low foaming tendencies
Medium oil content
Free of chlorine, secondary amines, phenols, nitrates, PCBs, and
heavy metals

BENEFITS: Product performance is constant and machine remains clean


Reliable in-service performance and long sump life
Heavy-duty machining capability
Ease of disposal and friendly work environments

APPLICATIONS: CITGO CITCOOL SS-HD is recommended for general machining


including thread cutting and forming, deep hole drilling and boring,
reaming, and grinding of cast irons, ferrous alloys and stainless Concentrate Diluted
steels, free cutting aluminum alloys, oil resistant plastics, and other with Water
non-ferrous materials.

Material Compatibility
Recommended Highly Recommended
P - Steels
M - St
S
Stainless
tainles
tainlesssS
Steel
K - Cast Iron
N - Non-ferrous *
*Might stain some sensitive aluminum alloys. e.g. 2000 and 7000 series

Refractometer Chart
9
8
7
Refractometer Reading

6
5
4
3
2
1
0
0 2 4 6 8 10 12
Concentration
(Continued)
(Continued)
Refractometer Reading at 10% = 6.8 oBrix
Refractometer Factor = 1.47

CITGO PG
CIT e tOr oPl eeut rmo l C
euom
r p oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10187C 1 0 1 8 7

Click Here for Return to


PI Sheet Table of Contents
145
P R O D U C T I N F O R M A T I O N

C I T G O C I T C O O L
S S - H D
D ate 06/15 - (Continued)
(Continued)

TYPICAL PROPERTIES - CITGO CITCOOL SS-HD

Material Code 639335001


Appearance, Concentrate (neat) Amber Fluid
Dilution (5% in DI water) Semi-Translucent
Metalworking Fluids

Gravity, Specific, ASTM D 1298, 60/60F 1.02


Mineral Oil Content % 20
pH at 3% concentration 9.5 (5%)
Defoaming mL (5% in 50 ppm water) Nil (60 sec.)

METAL MACHINABILITY GROUPS(1)


1 2 3 4
Non-Ferrous, Nickel Alloys, Stainless Steels, Titanium Alloys, High
Soft Metals(2) Nitralloy Steels, Monel Metals, Tensile Nickel Alloys,
Cast Irons and Cast Irons and Austentic Stainless
Alloy Steels (up to Alloy Steels Steels, Tool Steel
200 Brinell) (200 to 300 Brinell) and High Tensile
Alloy Steels (300 to
Machining Operation 400 Brinell)
Turning, Boring, Milling, 5-7% 5-7% 8-10% 8-10%
Forming, Drilling, Sawing

Tapping, Thread Rolling, 5-7% 5-7% 8-10% 8-10%


Reaming, Screw Cutting,
Broaching

Gear Shaping, Form and 5-7% 5-7% 8-10% 8-10%


Thread Milling, Shaving,
Hobbing, and Trepanning

Internal and External 5-7% 5-7% 5-7% 5-7%


Grinding, Form and
Thread Grinding

Stamping 5-20% 5-20% 5-20% 5-20%


Notes: (1) Dilution ratios shown are approximate and may require higher or lower water concentrations depending on a number of factors including the
type of metal cut, machine speed, the severity of the operation, metal hardness, etc.
(2) CITCOOL SS-HD might stain sensitive aluminum alloys such as 2000 and 7000 series alloys.

CITGO and CITCOOL are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10187C 1 0 1 8 7

Click Here for Return to


PI Sheet Table of Contents
146
P R O D U C T I N F O R M A T I O N

C I T G O Q U E N C H O L

Date 08/15

DESCRIPTION: CITGO Quenchol 521 and 624 are highly stable quench oils designed especially for use in steel heat
treating operations. They are formulated with premium high viscosity index base oils and additives to
provide outstanding service life and performance.

QUALITIES: CITGO Quenchol products provide:

Metalworking Fluids
Excellent thermal stability and oxidation resistance
Premium wetting ability and cooling capability
Uniform heat dissipation for quality hardened steel production
Less viscosity change during the quenching operation compared to low viscosity index oils

APPLICATIONS: CITGO Quenchol products offer superior service in steel quenching operations requiring a premium
mineral quench oil.

TYPICAL PROPERTIES:

CITGO QUENCHOL

Quenchol Quenchol
521 624
Material Code 639465001 639466001
Gravity, ASTM D 4052, API 33 31
Density, lb/gal at 60F 7.2 7.3
Flash Point, ASTM D 92, F (C),
Min. 354 (179) 410 (210)
Viscosity:
ASTM D 445, cSt at 40C 21 52.0
ASTM D 445, cSt at 100C 4.2 7.4
Viscosity Index, ASTM D 2270 104 104
Pour Point, ASTM D 97, F (C) 16 (-9) 16 (-9)
Color, ASTM D 1500 D8.0 D8.0
Quenching Time (Quenchometer),
ASTM D 3520, Sec.(1) 16.1 17.0
Quenchalyzer, ASTM D 6200
Max. Cooling Rate, C/sec 95.79 83.74
Temp. at Max. Cooling Rate, C 638.64 651.30
Cooling Rate at 300 C, C/sec 5.99 5.09
Time to reach 600 C, sec 7.500 8.250
Time to reach 400 C, sec 11.875 14.500
Time to reach 200 C, sec 46.625 53.000

Note:
(1) Test method ASTM D 3520 is no longer available. Values shown are for historic reference only.

CITGO and Quenchol are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10058C 1 0 0 5 8

Click Here for Return to


PI Sheet Table of Contents
147
P R O D U C T I N F O R M A T I O N

C I T G O R U S T - O - L E N E
L T
Date 06/15

DESCRIPTION: CITGO Rust-O-Lene LT is a rust preventative oil formulated with effective rust inhibitors and high
quality base oils. It exhibits excellent metal wetting and water displacement properties and is designed
for temporary protection of metal parts during manufacturing and storage. CITGO Rust-O-Lene LT can
also be used as a hydraulic and circulating oil where added rust protection is required.

FEATURES: May be applied by dipping, spraying or brushing


Metalworking Fluids

Excellent water displacement properties


Excellent metal wetting
Multi-purpose fluid

BENEFITS: Effective application on any part configuration


Protects parts after machining with aqueous cutting fluids
Provides a high degree of prevention of fingerprint or perspiration
acid corrosion
Can be used as an hydraulic and circulating oil where robust corrosion
protection is needed

APPLICATIONS: CITGO Rust-O-Lene LT is used for longer term rust protection of semi-
finished or finished metal parts and assemblies that require longer
term protection. It can be used by hydraulic and circulating systems for
industrial equipment requiring better protection from rust.

Material Compatibility
Recommended Highly Recommended
P - Steels
M-S Stainless
ta less
tain sSSteel
K - Cast Iron
N - Non-ferrous

Protected Metal Unprotected


TYPICAL PROPERTIES - CITGO RUST-O-LENE LT Metal

Material Code 639460001


Gravity, ASTM D 4052, API 30
Solvent Present No
Flash Point, COC, ASTM D92, F (C) 385 (196)
Viscosity, ASTM D 445, cSt at 40C 52
ASTM D 2161, SUS at 100F 241
Rust Protection, Humidity Cabinet (hours) 1300

CITGO and Rust-O-Lene are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10042C 1 0 0 4 2

Click Here for Return to


PI Sheet Table of Contents
148
P R O D U C T I N F O R M A T I O N

C I T G O R U S T - O - L E N E
S T
Date 06/15

DESCRIPTION: CITGO Rust-O-Lene ST is a rust preventative oil formulated with highly effective rust inhibitors, a high
flash solvent and high quality base oils. It provides a protective film after solvent evaporation and is
designed for short term protection of metal parts during manufacturing and storage.

FEATURES: May be applied by dipping, spraying or brushing


Excellent water displacement properties

Metalworking Fluids
Excellent metal wetting properties
High quality base oil and high flash point solvent carrier

BENEFITS: Effective application on any part configuration


Protects parts after machining with aqueous cutting fluids
Provides a high degree of prevention of fingerprint or perspiration
acid corrosion
Forms a protective film after solvent evaporation

APPLICATIONS: CITGO Rust-O-Lene ST is used for rust protection of semi-finished


or finished metal parts and assemblies where temporary or in transit
protection is required.

Material Compatibility
Recommended Highly Recommended
P - Steels
M - Stain
S
Stainless
ta less
ess S
Steel
K - Cast Iron
N - Non-ferrous

Protected Metal Unprotected


Metal
TYPICAL PROPERTIES - CITGO RUST-O-LENE ST

Material Code 639461001


Gravity, ASTM D 4052, API 41.6
Solvent Present Yes
Flash Point, COC, ASTM D92, F (C) 160 (72)
Viscosity, ASTM D 445, cSt at 40C 3
ASTM D 2161, SUS at 100F 36
Rust Protection, Humidity Cabinet (hours) 1300
NOTE: CITGO RUST-O-LENE ST cannot be sold in the California South Coast Air Quality Management District (SCAQMD) due
to the VOC level from the solvent.

CITGO and Rust-O-Lene are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, sTt oe nx ,a sT e x M
a sa n u M
f aacdt u
ere
i nd Ui nS AU S A
C10063C 1 0 0 6 3

Click Here for Return to


PI Sheet Table of Contents
149
P R O D U C T I N F O R M A T I O N

C I T G O T R U K U T
G P 2 0 5
Date 06/15

DESCRIPTION: CITGO Trukut GP 205 is a conventional general purpose cutting fluid designed to be readily mixed
with water to form a stable emulsion. Designed for a variety of machining operations, it is suitable for
use on ferrous and non-ferrous metals.

FEATURES: Forms stable emulsions in various water qualities


Metalworking Fluids

Multi-metal and general purpose applications


Good residual corrosion properties
Free from chlorinated paraffins
Excellent corrosion prevention properties

BENEFITS: Product performance is constant and machine remains clean


Wide application range reduces the need for several products
Increases the time between in process operations and protects the
machine tool parts from rust
Reduces disposal costs
Reduces the need for in-process corrosion protection fluids
Concentrate Diluted
APPLICATIONS: CITGO Trukut GP 205 is recommended for milling, turning, drilling, with Water
grinding and other metalworking operations on ferrous and non-ferrous
metals where efficiency of an emulsifiable oil is preferred. Trukut GP
205 has excellent cooling and rust prevention properties. It is also a
preferred grinding fluid.

Material Compatibility
Recommended Highly Recommended
P - Steels
S ee s
M - St
S
Stainless
tain
tain
inles
le
esssS
Steel
K - Cast Iron
N - Non-ferrous

Refractometer Chart
14
12
Refractometer Reading

10
8
6
4
2
0
0 2 4 6 8 10 12
Concentration

Refractometer Reading at 10% = 10.0 oBrix (Continued)


(Continued)
Refractometer Factor = 1.0

CITGO PG
CIT e tOr oPl eeut rmo l C
euom
r p oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10184C 1 0 1 8 4

Click Here for Return to


PI Sheet Table of Contents
150
P R O D U C T I N F O R M A T I O N

C I T G O T R U K U T
G P 2 0 5
(Continued)
D ate 06/15 - (Continued)

TYPICAL PROPERTIES - CITGO TRUKUT GP 205

Material Code 639468001


Gravity, Specific, ASTM D 1298, 60/60F 0.91
Density, lb/gal 7.59
Flash Point, COC, ASTM D 92, F (C) 320 (160)

Metalworking Fluids
Viscosity, cSt at 40C 35
Color, ASTM D 1500 3.0
Pour Point, ASTM D 97, F (C) 32 (0)
pH at 5% in Deionized 9.6
Corrosion (modified Iron Chip Rust test) Pass
Copper Corrosion, ASTM D 130, 3 hrs at 212F 1B
Emulsion Stability, 24 hrs at 77F
Deionized Water Pass
Hard Water Pass
Solution Stability, 24 hrs at 30F Pass
Appearance Yellow

METAL MACHINABILITY GROUPS


1 2 3 4
Non-Ferrous, Nickel Alloys, Stainless Steels, Titanium Alloys, High
Soft Metals Nitralloy Steels, Monel Metals, Tensile Nickel Alloys,
Cast Irons and Cast Irons and Austentic Stainless
Alloy Steels (up to Alloy Steels Steels, Tool Steel
200 Brinell) (200 to 300 Brinell) and High Tensile
Alloy Steels (300 to
Machining Operation 400 Brinell)
Turning, Boring, Milling, 5-7% 5-7% 8-12% 8-12%
Forming, Drilling, Sawing

Tapping, Thread Rolling, 5-7% 5-7% 8-12% 8-12%


Reaming, Screw Cutting,
Broaching

Gear Shaping, Form and 5-7% 5-7% 8-12% 8-12%


Thread Milling, Shaving,
Hobbing, and Trepanning

Internal and External 5-7% 5-7% 5-7% 5-7%


Grinding, Form and
Thread Grinding

Stamping 5-10% 5-10% 5-10% 5-10%


Note: Dilution ratios shown are approximate and may require higher or lower water concentrations depending on a number of factors including the type
of metal cut, machine speed, the severity of the operation, metal hardness, etc.

CITGO and Trukut are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their
respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10184C 1 0 1 8 4

Click Here for Return to


PI Sheet Table of Contents
151
P R O D U C T I N F O R M A T I O N

C I T G O T R U K U T
H D 2 2 0
Date 06/15

DESCRIPTION: CITGO Trukut HD 220 is a heavy-duty cutting and grinding fluid designed to be diluted with water to
form an emulsion. It is recommended for use on ferrous and non-ferrous metals.

FEATURES: Contains robust boundary lubrication and lubricity technology


Affords efficient cooling
Metalworking Fluids

Helps prevent bacterial growth


Forms stable emulsions in various water qualities
Low staining. Multi-metal and application compatibility
Free from chlorinated paraffins
Excellent corrosion prevention properties

BENEFITS: Improves tool life and surface finish


Increases productivity
Extends odor-free sump life
Predictable machining performance
Wide application range reduces the need for several products
Concentrate Diluted
Reduces disposal costs with Water
Reduces the need for in-process corrosion protection fluids

APPLICATIONS: CITGO Trukut HD 220 is well suited for CNC Machining where a single cutting fluid may be needed
to function in a wide variety of operations and metallurgies. It performs in multiple cutting operations
including turning, boring, drilling, grinding, and threading.

Material Compatibility
Recommended Highly Recommended
P - Steels
M-S Stainless
tainless
ess S
Steel
K - Cast Iron
N - Non-ferrous

Refractometer Chart
14
12
Refractometer Reading

10
8
6
4
2
0
0 2 4 6 8 10 12
Concentration
Refractometer Reading at 10% = 10.0 oBrix
Refractometer Factor = 1.0
(Continued)
(Continued)

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10175C 1 0 1 7 5

Click Here for Return to


PI Sheet Table of Contents
152
P R O D U C T I N F O R M A T I O N

C I T G O T R U K U T
H D 2 2 0
(Continued)
D ate 06/15 - (Continued)
TYPICAL PROPERTIES - CITGO TRUKUT HD 220

Material Code 639469001


Gravity, Specific, ASTM D 1298, 60/60F 0.94
Density, lb/gal 7.83
Flash Point, COC, ASTM D 92, F (C) 311 (155)

Metalworking Fluids
Viscosity, cSt at 40C 111
Color, ASTM D 1500 L5.0
Pour Point, ASTM D 97, F (C) 32 (0)
pH at 5% in Deionized 9.0
Corrosion (modified Iron Chip Rust test) Pass
Copper Corrosion, ASTM D 130, 3 hrs at 212F 1B
Emulsion Stability, 24 hrs at 77F
Deionized Water Pass
Hard Water Pass
Solution Stability, 24 hrs at 30F Pass
Appearance Amber

METAL MACHINABILITY GROUPS


1 2 3 4
Non-Ferrous, Nickel Alloys, Stainless Steels, Titanium Alloys, High
Soft Metals Nitralloy Steels, Monel Metals, Tensile Nickel Alloys,
Cast Irons and Cast Irons and Austentic Stainless
Alloy Steels (up to Alloy Steels Steels, Tool Steel
200 Brinell) (200 to 300 Brinell) and High Tensile
Alloy Steels (300 to
Machining Operation 400 Brinell)
Turning, Boring, Milling, 5-7% 5-7% 6-8% 8-10%
Forming, Drilling, Sawing

Tapping, Thread Rolling, 6-9% 5-7% 6-8% 8-10%


Reaming, Screw Cutting,
Broaching

Gear Shaping, Form and 5-7% 5-7% 6-8% 8-10%


Thread Milling, Shaving,
Hobbing, and Trepanning

Internal and External 5-7% 5-7% 5-7% 5-7%


Grinding, Form and
Thread Grinding

Stamping 10% 10% 20% 20%


Note: Dilution ratios shown are approximate and may require higher or lower water concentrations depending on a number of factors including the type
of metal cut, machine speed, the severity of the operation, metal hardness, etc.

CITGO and Trukut are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their
respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10175C 1 0 1 7 5

Click Here for Return to


PI Sheet Table of Contents
153
P R O D U C T I N F O R M A T I O N

C I T G O T U L - K U T O I L B A S E
C U T T I N G O I L C O N C E N T R A T E
Date 06/15

DESCRIPTION: CITGO Tul-Kut Oil Base is a special additive concentrate designed for fortifying cutting oils in the field.
CITGO Tul-Kut Oil Base is designed without chlorine containing components to minimize any hazards
to the environment.

FEATURES: Non-staining to yellow metals (copper and copper-containing alloys)


Metalworking Fluids

Non-corrosive
Good solubility in mineral oil base fluids
Highly concentrated level of performance additive
Long history of proven performance
Non-chlorinated

APPLICATIONS: CITGO Tul-Kut Oil Base is used to refortify cutting oils. Generally, 3 to 5 percent of concentrate is
sufficient. Higher concentrations can be used for extremely difficult machining operations. CITGO
Tul-Kut Oil Base can be diluted with kerosene or low viscosity oils to compound products when
customers prefer to do their own blending for honing and lapping.

TYPICAL PROPERTIES:

CITGO TUL-KUT OIL BASE

Material Code 639565001

Gravity, ASTM D 4052, API 12.0


Gravity, Specific, 60/60F, ASTM D 1298 0.986
Density, lb/gal at 60F 8.21
Flash Point, ASTM D 92, F (C) 400 (204)
Viscosity, ASTM D 445, cSt at 40C 370
cSt at 100C 40
Color, ASTM D 1500 D8 (Dark)
Pour Point, ASTM D 97 equivalent, F (C) 60 (16)
Sulfur, ASTM D 2622, w% 10.5
Copper Corrosion, ASTM D 130
(3 hrs. at 212F, 10% in 100 SUS at 100F base oil) 2

CITGO and Tul-Kut are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.

CITGO PG
CIT e tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10181C 1 0 1 8 1

Click Here for Return to


PI Sheet Table of Contents
154
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R 1 6 4 0 A E
Date 06/15

DESCRIPTION: CITGO Pacemaker 1640AE is an SAE 40 low ash stationary natural gas engine oil and anti-emulsion
compressor lubricant. It is specially formulated to help prevent emulsion formation in high moisture
gas conditions. High moisture gas is prevalent in shale and coal bed methane (CBM) production
areas where water is introduced to the gas stream. This and other operating conditions can trigger
oil and water emulsion in compressor systems and cause operating issues. Conventional low ash
engine oils form emulsion under these conditions, requiring use of a separate compressor lubricant.
CITGO Pacemaker 1640AE helps avoid use of separate lubricants by mitigating compressor emulsion
without sacrificing engine protection. CITGO Pacemaker 1640AE complies with engine manufacturers
warranties and meets non-selective catalytic converter requirements.

QUALITIES: CITGO Pacemaker 1640AE offers:


Excellent engine protection while helping prevent compressor emulsion formation in high moisture
gas conditions
Special detergent-dispersant technology for clean engine operation
Deposit control and wear protection for valves, pistons, rings, and liners
TBN retention to neutralize combustion acids

Industrial Gas Engine Oils


Effective oxidation and nitration control
Catalyst compatible

APPLICATIONS: CITGO Pacemaker 1640AE is a specially formulated SAE 40 lubricant that provides superior engine
protection while avoiding emulsion formation in high moisture gas environments. CITGO Pacemaker
1640AE is recommended for a wide range of high and medium speed naturally aspirated and
turbocharged 4-cycle engines including those manufactured by Caterpillar, Waukesha, Superior,
Cooper-Bessemer, Cummins and Dresser Rand.

TYPICAL PROPERTIES:

CITGO PACEMAKER 1640AE

SAE Grade 40
Material Code 632052001
Gravity, ASTM D 4052, API 29.9
Pounds Per Gallon 7.3
Flash Point, COC, ASTM D 92, F (C) 495 (257)
Viscosity, ASTM D 445, cSt at 40C 120
cSt at 100C 13.2
Viscosity Index, ASTM D 2270 105
Pour Point, ASTM D 97, F (C) -11 (-24)
Color, ASTM D 1500 L6.5
Sulfated Ash, ASTM D 874, m% 0.5
Total Base No., ASTM D 2896, mg KOH/g 4.1
Total Acid No., ASTM D 664, mg KOH/g 1.0
Phosphorous, ppm 260

CITGO and Pacemaker are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CIT
CITGO PGe tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, sTt oe nx ,a sT e x M
a sa n u M
f aacdt u
ere
i nd Ui nS AU S A
C10233C 1 0 2 3 3

Click Here for Return to


PI Sheet Table of Contents
155
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
G A S E N G I N E O I L
1 0 0 0 S E R I E S
Date 08/15

DESCRIPTION: CITGO Pacemaker Gas Engine Oil 1000 Series oils are ashless stationary natural gas engine
lubricants fortified with an ashless dispersant, corrosion inhibitor, oxidation inhibitor and antiwear
additive package. They are available in a single viscosity grade at the midpoint between SAE 30 and
SAE 40 grades and an SAE 15W-40 grade.

QUALITIES: CITGO Pacemaker Gas Engine Oil 1000 Series Oils provide:
Use of high viscosity index base stock with low carbon residue minimizes carbon and varnish
formation and maximizes oil oxidation life
Contain no bright stock
Ashless formulation provides maximum protection against spark plug fouling
Ashless dispersant system provides excellent cleaning action which keeps piston rings free in their
grooves, thereby extending overhaul periods and engine life
Excellent resistance to oil oxidation
Superior corrosion protection to vital engine and compressor components
Industrial Gas Engine Oils

Use in compressor cylinder lubrication


Superior protection against ring belt and port deposits in 2-cycle engine designs

APPLICATIONS: CITGO Pacemaker Gas Engine Oil 1000 Series oils are applicable for use in a wide variety of
2- and 4-cycle gas engine designs. They meet the performance requirements for Dresser-Rand
Categories I and II, as well as requirements for other gas engine manufacturers requiring ashless
type engine oils.
CITGO Pacemaker Gas Engine Oil 1035LP is specially formulated to provide enhanced low
temperature properties. This low pour point product provides excellent cold temperature flow
properties and is well suited where low temperature fluidity is needed but a monograde viscosity
is preferred.

The CITGO Pacemaker Gas Engine Oil 1000 Series has a history of outstanding performance
in gas processing, gas transmission and other applications calling for a high quality ashless
natural gas engine oil.

(Continued)

(Continued)

CIT
CITGO PGe tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10069C 1 0 0 6 9

Click Here for Return to


PI Sheet Table of Contents
156
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
G A S E N G I N E O I L
1 0 0 0 S E R I E S
D ate 08/15 - (Continued)
(Continued)

TYPICAL PROPERTIES:

CITGO PACEMAKER GAS ENGINE OIL 1000 SERIES

Product Name 1015 1035 1035LP

SAE Grade 15W-40 30/40 30/40

Material Code 632210001 632032001 632031001

Gravity, ASTM D 4052, API 31.0 29.8 29.2


Pounds Per Gallon 7.25 7.31 7.33
Flash Point, COC, ASTM D 92, F (C), Min. 471 (244) 543 (284) 460 (238)
Fire Point, COC, ASTM D 92, F (C), Min. 514 (268) 563 (295) 563 (295)
Viscosity, ASTM D 445, cSt at 40C 99.9 121.2 114.5
Viscosity, ASTM D 445, cSt at 100C 13.8 12.9 12.6
Viscosity Index, ASTM D 2270 139 99 102
Pour Point, ASTM D 97, F (C) -22 (-30) +10 (-12) -27 (-33)

Industrial Gas Engine Oils


Color, ASTM D 1500 L2.0 L2.0 L1.5
Carbon Residue, % (base stock) 0.02 0.02 0.02
Total Acid No., ASTM D 664, mg KOH/g 0.51 0.43 0.2
Total Base No., ASTM D 2896, mg KOH/g 1.0 1.0 1.0
Phosphorus, ppm 400 400 400
Antiwear Yes Yes Yes
Corrosion Inhibitor Yes Yes Yes
Dispersant Yes Yes Yes
Foam Suppressor Yes Yes Yes
Oxidation Inhibitor Yes Yes Yes

CITGO and Pacemaker are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10069C 1 0 0 6 9

Click Here for Return to


PI Sheet Table of Contents
157
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
G A S E N G I N E O I L
1 2 0 0 S E R I E S
Date 06/15

DESCRIPTION: CITGO Pacemaker Gas Engine Oil 1200 Series oils are premium quality, ashless stationary natural
gas engine oils fortified with a latest generation dispersant additive package in combination with
corrosion, oxidation and foam inhibitors, and a premium antiwear additive package. They provide
excellent performance in 2-cycle engines and also provide superior service in many 4-cycle engines.

QUALITIES: The use of high viscosity index base stocks with low carbon residue minimizes carbon and varnish
formation and serves to provide maximum oxidation resistance.
Contain no bright stock.
Provide superior protection against ring belt and port deposits in 2-cycle engines.
Use ashless formulation minimizes spark plug fouling.
Are highly dispersant, which provides excellent engine cleanliness. By keeping piston rings free in
their grooves, extended engine overhaul periods and engine life can be achieved.
Offer excellent resistance to oil nitration and oxidation.
Promote lower oil consumption, fewer deposits and reduced maintenance costs.
Industrial Gas Engine Oils

Provide superior corrosion protection to vital engine and compressor components.

APPLICATIONS: CITGO Pacemaker Gas Engine Oil 1200 Series oils provide superior antiwear protection, varnish and
deposit control in naturally aspirated and turbocharged 2-cycle and 4-cycle gas engines.

These products meet the performance characteristics required for Dresser-Rand Categories I and II
gas engines as well as other 2- and 4-cycle units of major equipment manufacturers requiring ashless
type oils.
These premium qualities make CITGO Pacemaker Gas Engine Oil 1200 Series the best choice for
universal ashless gas engine oils in a wide variety of low- and high-speed 2- and 4-cycle engines.

(Continued)

(Continued)

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10070C 1 0 0 7 0

Click Here for Return to


PI Sheet Table of Contents
158
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
G A S E N G I N E O I L
1 2 0 0 S E R I E S
(Continued)
D ate 06/15 - (Continued)

TYPICAL PROPERTIES:

CITGO PACEMAKER GAS ENGINE OIL 1200 SERIES

Product Name 1215 1230 1240

SAE Grade 15W-40 30 40

Material Code 632037001 632035001 632036001

Gravity, ASTM D 4052, API 30.8 30.0 29.6


Pounds Per Gallon 7.26 7.3 7.31
Flash Point, COC, ASTM D 92, F (C), Min. 482 (250) 496 (258) 543 (284)
Fire Point, COC, ASTM D 92, F (C), Min. 514 (268) 518 (270) 576 (302)
Viscosity, ASTM D 445, cSt at 40C 98.2 96.7 124.6
Viscosity, ASTM D 445, cSt at 100C 13.7 11.2 13.2
Viscosity Index, ASTM D 2270 141 101 100
Pour Point, ASTM D 97, F (C) -17 (-27) +15 (-9) +10 (-12)

Industrial Gas Engine Oils


Color, ASTM D 1500 L2.0 L2.5 L3.0
Carbon Residue, % (base stock) 0.02 0.02 0.02
Total Base No., ASTM D 2896, mg KOH/g 1.2 1.2 1.2
Phosphorus, ppm 500 500 500
Oxidation Inhibitor Yes Yes Yes
Corrosion Inhibitor Yes Yes Yes
Dispersant Yes Yes Yes
Antiscuff/Antiwear Yes Yes Yes
Total Acid No., ASTM D 664, mg KOH/g 0.61 0.45 0.69

CITGO and Pacemaker are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10070C 1 0 0 7 0

Click Here for Return to


PI Sheet Table of Contents
159
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
G A S E N G I N E O I L
1 6 0 0 S E R I E S
Date 06/15

DESCRIPTION: CITGO Pacemaker Gas Engine Oil 1600 Series oils are superior low ash, low phosphorus stationary
natural gas engine oils with a balanced advanced additive package. These new generation oils deliver
a superior level of cleanlinesswith excellent wear protection with a low ash formula that complies
with manufacturers warranties and non selective catalytic converter requirements.
Formulated with the latest generation additives and highest quality base stocks available,
CITGO Pacemaker Gas Engine Oil 1600 Series oils are unsurpassed in performance.

QUALITIES: Contain special dispersants and detergents to help ensure a cleaner, longer running engine.
Control deposits and minimize wear of pistons, rings, and liners.
Retain TBN to neutralize combustion acids from sour gas.
Effectively control oxidation and nitration which create sludge that thickens the oil, plugs filters and
causes excessive foaming.
Minimize valve recession to provide longer head life.

APPLICATIONS: CITGO Pacemaker Gas Engine Oil 1600 Series oils are low ash oils suitable for a wide range of
Industrial Gas Engine Oils

engines operating on virtually any variation of natural or synthetic gas, gas from digester or landfill
sources or fuels containing low levels of sulfur and chloroflurocarbons (CFC). Note: In high CFC/sour
gas applications, an oil with a higher base reserve may be required.
These oils are recommended for high and medium speed 4-cycle engines manufactured by
Caterpillar, Waukesha, Superior, Cooper-Bessemer; Cummins, Dresser-Rand (Categories I, II and III),
as well as low-speed engines manufactured by Cooper-Bessemer and Worthington C4-Cycle.
CITGO Pacemaker Gas Engine Oil 1640LP is a specially formulated SAE 40 grade product that
exhibits superior low temperature properties, compared with other monograde oils. This low pour
product is particularly well suited for applications where improved low temperature fluidity is needed,
but a monograde oil is recommended by the engine manufacturer.

(Continued)

(Continued)

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10071C 1 0 0 7 1

Click Here for Return to


PI Sheet Table of Contents
160
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
G A S E N G I N E O I L
1 6 0 0 S E R I E S
(Continued)
D ate 06/15 - (Continued)

TYPICAL PROPERTIES:

CITGO PACEMAKER GAS ENGINE OIL 1600 SERIES

Product Name 1615 1630 1640 1640LP

SAE Grade 15W-40 30 40 40

Material Code 632047001 632045001 632046001 632048001

Gravity, ASTM D 4052, API 30.6 29.7 28.7 28.7


Pounds Per Gallon 7.27 7.31 7.35 7.35
Flash Point, COC, ASTM D 92, F (C) 446 (230) 466 (241) 511 (266) 511 (266)
Viscosity, ASTM D 445, cSt at 40C 96.7 89.2 125.1 126.6
Viscosity, AST McSt at 100C 13.6 10.9 13.3 13.5
Viscosity Index, ASTM D 2270 141 107 101 102
Pour Point, ASTM D 97, F (C) -27 (-33) -27 (-33) +10 (-12) -33 (-36)
Color, ASTM D 1500 L5.0 L4.5 L4.5 L4.5

Industrial Gas Engine Oils


Carbon Residue, % (base stock) 0.02 0.02 0.02 0.02
Sulfated Ash, ASTM D 874, m% 0.5 0.5 0.5 0.5
Total Base No., ASTM D 2896, mg KOH/g 4.0 4.0 4.0 4.0
Total Acid No., ASTM D 664, mg KOH/g 0.60 0.63 0.52 0.59
Phosphorous, ppm 280 280 280 280

CITGO and Pacemaker are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10071C 1 0 0 7 1

Click Here for Return to


PI Sheet Table of Contents
161
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
G A S E N G I N E O I L
1 7 0 0 S E R I E S
Date 06/15

DESCRIPTION: CITGO Pacemaker Gas Engine Oil 1700 Series oils are superior new generation low ash, low
phosphorus stationary natural gas engine oils with an advanced additive package that deliver a
superior level of cleanliness and excellent wear protection with a low ash formula that complies with
manufacturers warranties and non selective catalytic converter requirements.
Formulated with latest generation additive technology and highest quality Group II base stocks.
CITGO Pacemaker Gas Engine Oil 1700 Series oils offer outstanding performance.
In CITGO rigorous field testing, these oils have shown superior protection against nitration and
oxidation, plus resistance to viscosity increase for longer drain intervals.

QUALITIES: Contain special dispersants and detergents help ensure a cleaner, longer running engine.
Control deposits and minimize wear of pistons, rings, and liners.
Retain TBN to neutralize combustion acids from sour gas.
Contain specialized antioxidant/base oil combination effectively inhibits oxidation and nitration in
severe service.
Control sludge that thickens the oil, plugs filters and causes excessive foaming.
Industrial Gas Engine Oils

Minimize valve recession to provide longer head life.

APPLICATIONS: CITGO Pacemaker Gas Engine Oil 1700 Series oils are low ash oils suitable for a wide range of
engines operating on virtually any variation of natural or synthetic gas, gas from digester or landfill
sources or fuels containing low levels of sulfur and chloroflurocarbons (CFC). Note: In high CFC/sour
gas applications, an oil with a higher base reserve may be required.
These oils are recommended for high and medium speed 4-cycle engines manufactured by
Caterpillar, Waukesha, Superior, Cooper-Bessemer, Cummins, Dresser-Rand (Categories I, II and III),
as well as low-speed engines manufactured by Cooper Bessemer and Worthington C4-Cycle).
CITGO Pacemaker Gas Engine Oil 1740LP is a specially formulated SAE 40 grade product that
exhibits superior low temperature properties, compared with other monograde oils. This low pour
product is particularly well suited for applications where improved low temperature fluidity is needed,
but a monograde oil is recommended by the engine manufacturer.

(Continued)

(Continued)

CITGO
CIP
TGe tOr o P
l eeut m
r o lCe ou rmp oCr oa rt p
i oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHo on u, sTt oe nx ,a sT e x M
a sa nu M
f aac dt ue r e
i nd Ui nS AU S A
C10126C 1 0 1 2 6

Click Here for Return to


PI Sheet Table of Contents
162
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
G A S E N G I N E O I L
1 7 0 0 S E R I E S
(Continued)
D ate 06/15 - (Continued)

TYPICAL PROPERTIES:

CITGO PACEMAKER GAS ENGINE OIL 1700 SERIES

Product Name 1715 1730 1740 1740 LP

SAE Grade 15W-40 30 40 40

Material Code 632075001 632073001 632074001 632076001

Gravity, ASTM D 4052, API 30.4 29.6 29.9 29.6


Pounds Per Gallon 7.28 7.32 7.30 7.32
Flash Point, COC, ASTM D 92, F (C) 446 (230) 466 (241) 473 (245) 480 (249)
Viscosity, ASTM D 445, cSt at 40C 102.7 92 128.8 130.4
Viscosity, ASTM D 445, cSt at 100C 13.7 11.0 13.6 13.7
Viscosity Index, ASTM D 2270 133 104 101 101
Pour Point, ASTM D 97, F (C) -22 (-30) -16 (-27) +10 (-12) -26 (-33)
Color, ASTM D 1500 L6.0 L5.0 L5.0 L5.0

Industrial Gas Engine Oils


Carbon Residue, % (base stock) 0.02 0.02 0.02 0.02
Sulfated Ash, ASTM D 874, m% 0.45 0.45 0.45 0.45
Total Base No., ASTM D 2896, mg KOH/g 5.0 5.0 5.0 5.0
Total Acid No., ASTM D 664, mg KOH/g 0.75 0.66 0.67 0.68
Phosphorous, ppm 280 280 280 280

CITGO and Pacemaker are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10126C 1 0 1 2 6

Click Here for Return to


PI Sheet Table of Contents
163
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
G A S E N G I N E O I L
1 9 0 0 X L S E R I E S
Date 09/16

DESCRIPTION: CITGO Pacemaker Gas Engine Oil (GEO) 1900 XL series are next-generation, premium-performance
low ash and low phosphorus lubricants for stoichiometric and lean-burn stationary natural gas
engines. CITGO Pacemaker GEO 1900 XL series are designed for highly loaded 4-cycle natural gas
engines operating under severe conditions and provides premium performance over older technology
lubricants in high nitration conditions typically found in stoichiometric engine operation.

QUALITIES: Exceptional resistance to oxidation and nitration


Extended oil drain intervals capability (up to two times vs. other premium oils operating in severe
conditions) helps maximize production and lowers operating cost through less down time, and
reduced lubrication cost
Exceptional deposit control and protection against piston scuffing and ring and liner wear
TBN retention to neutralize combustion acids from sour gas
Minimized valve recession for longer head life
Improved TAN control
Catalyst compatible
Industrial Gas Engine Oils

APPLICATIONS: CITGO Pacemaker GEO 1900 XL series low ash lubricants meet rigorous demands of modern natural
gas engines operating in a variety of natural gas fuel qualities.
Recommended for high and medium speed 4-cycle engines manufactured by:
Caterpillar Worthington (low-speed engines)
Waukesha Cooper-Bessemer (low-speed engines)
Superior Cummins
Jenbacher Dresser-Rand (Categories I, II, III)
Wrtsil

(Continued)

(Continued)

C I T G OC I PT eGt O
r o lPeeut m
r o lCe ou rmp oCr a
o tr ipoonr a t i8o0n0 / 2 84 08 0- 4
/ 264884- 4 6 H
8o4 u s tHo on u, sTt o
en , sT e x M
xa a sa nu M
f aacdt u
ere
i nd Ui nS AU S A
C10197 C 1 0 1 9 7

Click Here for Return to


PI Sheet Table of Contents
164
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
G A S E N G I N E O I L
1 9 0 0 X L S E R I E S
(Continued)
D ate 09/16 - (Continued)

Proven in Severe Service


Caterpillar 300 Series and Waukesha VHP Series stoichiometric engines are historically severe in
nitration. In field operation, results show CITGO Pacemaker GEO 1940 XL delivered up to 200%
longer engine oil life compared to other premium oils.

Nitration - Hours to OEM Limit Oxidation - Hours to OEM Limit


Caterpillar 300 Series Caterpillar 300 Series

6000 6000
5500 5500
5000 5000
4500 4500
4000 4000
3500 3500
3000 3000
2500 2500

Industrial Gas Engine Oils


2000 2000
1500 1500
1000 1000
500 500
0 0
Premium Oil C Pacemaker GEO 1940 XL Premium Oil C Pacemaker GEO 1940 XL

Caterpillar 300 Series Stoichiometric Engines

Nitration - Hours to OEM Limit Oxidation - Hours to OEM Limit


Waukesha VHP Series Waukesha VHP Series

4000 4000

3500 3500

3000 3000

2500 2500

2000 2000

1500 1500

1000 1000

500 500

0 0
Premium Oil A Premium Oil B Pacemaker GEO Premium Oil A Premium Oil B Pacemaker GEO
1940 XL 1940 XL

Waukesha VHP Series Stoichiometric Engines

(Continued)
(Continued)

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10197C 1 0 1 9 7

Click Here for Return to


PI Sheet Table of Contents
165
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
G A S E N G I N E O I L
1 9 0 0 X L S E R I E S
(Continued)
D ate 09/16 - (Continued)

TYPICAL PROPERTIES:

CITGO PACEMAKER GAS ENGINE OIL 1900 XL SERIES

Product Name 1930 XL 1940 XL

SAE Grade 30 40

Material Code 632090001 632085001

Gravity, ASTM D 4052, API 29.0 28.5


Pounds Per Gallon 7.34 7.37
Viscosity, ASTM D 445, cSt at 40C 98 126.7
Viscosity, ASTM D 445, cSt at 100C 11.5 13.6
Viscosity Index, ASTM D 2270 105 103
Pour Point, ASTM D 97, F (C) -33 (-36) -33 (-36)
Color, ASTM D 1500 L5.0 L5.0
Sulfated Ash, ASTM D 874, m% 0.5 0.5
Industrial Gas Engine Oils

Total Base No., ASTM D 2896, mg KOH/g 5.09 5.09


Total Acid No., ASTM D 664, mg KOH/g 0.82 0.82
Phosphorus, ppm 280 280

CITGO and Pacemaker are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10197C 1 0 1 9 7

Click Here for Return to


PI Sheet Table of Contents
166
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
G A S E N G I N E O I L
7 0 0 S E R I E S
Date 06/15

DESCRIPTION: CITGO Pacemaker Gas Engine Oil 700 Series oils are medium ash type oils formulated from high
VI base stocks and select additives to provide excellent wear protection and deposit control in high
speed, severe service engines. The additive package contains zinc for a high level of antiwear
performance plus additional antioxidant for improved oxidation and nitration stability and resistance to
thermal breakdown needed for long service life.

QUALITIES: Provide excellent valve face and seat lubrication.


Improved engine cleanliness and sludge control performance in heavy-duty, high temperature and
continuous engine operation.
Improved oxidation and nitration resistance.
Better wear protection, especially in valve train, and better protection from ring and valve sticking.
Higher TBN will offer greater protection against acid increase and corrosive wear which means
longer oil life.

APPLICATIONS: CITGO Pacemaker Gas Engine Oil 700 Series oils are recommended for naturally-aspirated to

Industrial Gas Engine Oils


turbocharged, medium and high speed, high output four-cycle engines in field gathering service.
They are also recommended for engines in cogeneration service, digester gas-fueled, dual-fueled
(i.e. diesel/natural gas) and diesel-fueled service.
CITGO Pacemaker Gas Engine Oil 700 Series oils are recommended for use in lean/clean burn
engines. They are NOT recommended for engines equipped with catalytic converters.
CITGO Pacemaker Gas Engine Oil 700 Series oils can also be used to lubricate the compressor
cylinders in natural gas service.

(Continued)

(Continued)

CITGO PG
CIT e tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10066C 1 0 0 6 6

Click Here for Return to


PI Sheet Table of Contents
167
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
G A S E N G I N E O I L
7 0 0 S E R I E S
(Continued)
D ate 06/15 - (Continued)

TYPICAL PROPERTIES:

CITGO PACEMAKER GAS ENGINE OIL 700 SERIES

Product Name 715 740

SAE Grade 15W-40 40

Material Code 632033001 632034001

Gravity, ASTM D 4052, API 30.1 30.1


Pounds Per Gallon 7.29 7.29
Flash Point, COC, ASTM D 92, F (C), Min. 460 (238) 453 (234)
Viscosity, ASTM D 445, cSt at 040C 99.6 129.3
cSt at 100C 13.9 13.7
Viscosity Index, ASTM D 2270 141 102
Pour Point, ASTM D 97, F (C) -27 (-33) +5 (-15)
Color, ASTM D 1500 L6.5 L6.5
Industrial Gas Engine Oils

Carbon Residue, % (base stock) 0.16 0.16


Sulfated Ash, ASTM D 874, m% 0.90 0.90
Total Acid No., ASTM D 664 1.79 1.65
Total Base No., ASTM D 2896 6.5 6.5
Phosphorus, m% 0.06 0.06
Oxidation Inhibitor Yes Yes
Corrosion Inhibitor Yes Yes
Detergent-Dispersant Yes Yes
Metal Deactivator Yes Yes
Antiwear Yes Yes

CITGO and Pacemaker are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10066C 1 0 0 6 6

Click Here for Return to


PI Sheet Table of Contents
168
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
G A S E N G I N E O I L 9 3 5
Date 06/15

DESCRIPTION: CITGO Pacemaker Gas Engine Oil 935 is a non-detergent stationary natural gas enzyme oil fortified
with ashless inhibitors to resist oxidation, corrosion and foaming. It is available in a single viscosity
grade at the point where the SAE 30 and SAE 40 grades meet.

QUALITIES: CITGO Pacemaker Gas Engine Oil 935 is formulated with high viscosity index base stocks combined
with an excellent high-temperature ashless oxidation inhibitor to produce a non-detergent oil with
exceptional thermal stability and low carbon residue.

APPLICATIONS: CITGO Pacemaker Gas Engine Oil 935 is recommended where a non-detergent oil is specified. Its
principal applications are in 4-cycle horizontal engines, 2- and 4-cycle engines equipped with Fullers
earth by-pass filters, and in naturally-aspirated 2-cycle engines equipped with full flow filters. This
product can also be used to lubricate compressor cylinders in natural gas service.

TYPICAL PROPERTIES:

CITGO PACEMAKER GAS ENGINE OIL 935

Industrial Gas Engine Oils


SAE Grade 30/40

Material Code 632030001

Gravity, ASTM D 4052, API 30.2


Pounds Per Gallon 7.29
Flash Point, ASTM D 92, COC, F (C) 518 (270)
Fire Point, ASTM D 92, COC, F (C) 530 (277)
Viscosity, ASTM D 445, cSt at 40C 114
Viscosity, cSt at 100C 12.4
Viscosity, ASTM D 2161, SUS at 100F 596
SUS at 210F 69
Viscosity Index, ASTM D 2270 99
Pour Point, ASTM D 97, F(C) 10 (-12)
Color, ASTM D 1500 L0.5
Carbon Residue, % (base stock) 0.02
Total Acid No., ASTM D 664 0.1
Total Base No., ASTM D 2896 0.2
Oxidation Inhibitor Yes
Foam Suppressor Yes

CITGO and Pacemaker are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGO PG
CIT e tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10068C 1 0 0 6 8

Click Here for Return to


PI Sheet Table of Contents
169
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
G A S E N G I N E O I L
1 5 S L
Date 09/15

DESCRIPTION: CITGO Pacemaker Gas Engine Oil 15SL SAE 15W-40 is a long life low ash stationary natural gas
engine oil formulated with synthetic base stocks and an advanced additive system. It is specially
formulated to provide lubrication in engines that have been converted to natural gas fuel, such as
those in LP and agricultural irrigation pump service. Excellent oxidation and nitration resistance helps
avoid sludge and oil thickening, which can plug oil filters and cause excessive foaming.

QUALITIES: Compared with conventional engine oils, CITGO Pacemaker Gas Engine Oil 15SL SAE 15W-40
offers:
Dramatically extended oil service life
High shear stability
Special additives designed to minimize slider follower wear
Deposit control and wear protection of pistons, rings and liners
Effective oxidation and nitration control

APPLICATIONS: CITGO Pacemaker Gas Engine Oil 15SL SAE 15W-40 is specially formulated to provide extended
fluid life and engine lubrication in stationary engines converted to natural gas such as irrigation pump
Industrial Gas Engine Oils

service and LP applications.

TYPICAL PROPERTIES:

CITGO PACEMAKER GAS ENGINE OIL 15SL

SAE Grade 15W-40

Commodity Code 632056


Gravity, API, ASTM D287 31.6
Pounds per Gallon 7.22
Flash Point, COC, F (C) 489 (254)
Viscosity, ASTM D445, cSt @ 40C 107
Viscosity, ASTM D445, cSt @ 100C 15.1
Viscosity Index 147
Pour Point, F (C), ASTM D97 -60 (-51)
Color, ASTM D1500 L6
Sulfated Ash, m%, ASTM D874 0.45
Total Base Number, ASTM D2896 5.0
Zinc, ppm 900

CITGO and Pacemaker are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CIT
CITGO PGe tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, sTt oe nx ,a sT e x M
a sa nu M
f aacdt u
ere
i nd Ui nS AU S A
C10235C 1 0 2 3 5

Click Here for Return to


PI Sheet Table of Contents
170
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
G A S E N G I N E O I L
L F G L A 4 0
Date 12/15

DESCRIPTION: CITGO Pacemaker Gas Engine Oil LFG LA 40 is a superior low ash, low phosphorus gas engine
oil, designed for high output, 4-cycle natural gas engines operating on landfill and digester gas.
As demonstrated in field service, this premium low ash package can significantly extend oil drain
intervals, while minimizing the negative effects of ash deposits on sensitive engine components.
QUALITIES: Specifically designed for high BMEP engines
Low ash formula minimizes combustion chamber deposits
Specially formulated with modern chemistry to neutralize combustion acids from landfill gas and
digester gas
Controls deposits and minimizes wear of pistons, rings and liners

APPLICATIONS CITGO Pacemaker Gas Engine Oil LFG LA 40 is recommended for a wide range of engines that
& APPROVALS: operate on landfill and digester gas, including engines manufactured by Caterpillar, Waukesha,
GE Jenbacher, Deutz and Cummins.
CITGO Pacemaker Gas Engine Oil LFG LA 40 has been approved by GE Jenbacher for use in type
2, 3, 4 and 6 engines (fuel classes B and C) and appears in their Technical Instruction TA 1000-1109.

BENEFITS: Optimized ash content helps control combustion chamber deposits to maintain the power output of

Industrial Gas Engine Oils


high BMEP engines for reduced maintenance and longer engine life.
Exceptional piston, ring and liner wear control
Significantly extends drain intervals
Excellent base retention
Strong corrosion resistance
Neutralizes acidic components such as Total Organic Halide as Chloride (TOHCI) and H2S at
moderate levels.

TYPICAL PROPERTIES:

CITGO PACEMAKER GAS ENGINE OIL LFG LA 40

SAE Grade 40

Material Code 632051001

Gravity, ASTM D 4052, API 29.3


Density, lb/gal at 60F 7.33
Flash Point, ASTM D 92, COC, F (C) 525 (274)
Viscosity, ASTM D 445, cSt at 40C 123
Viscosity, cSt at 100C 13.5
Viscosity Index, ASTM D 2270 105
Pour Point, ASTM D 97, F (C) -11 (-24)
Color, ASTM D 1500 L5.0
Carbon Residue, % (base stock) 0.02
Sulfate Ash, ASTM D 874, % 0.55
Total Base No., ASTM D 2896, mg KOH/g 5
Total Acid No., ASTM D 664, mg KOH/g 1.16

CITGO and Pacemaker are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGO PG
CIT e tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10182C 1 0 1 8 2

Click Here for Return to


PI Sheet Table of Contents
171
P R O D U C T I N F O R M A T I O N

C I T G O R A I L R O A D C A R J O U R N A L O I L
N O . 9
Date 07/15

DESCRIPTION: CITGO Railroad Car Journal Oil No. 9 is a quality lubricating oil designed specially for use as a
railroad car journal oil to cover a wide range of service requirements.

QUALITIES: Rust Protection It guards against rust and corrosion under adverse conditions, especially when
cars are idle.
Low Pour Point, High Viscosity Index This oil flows freely at very low temperatures, yet provides
effective lubrication in high temperature service.

APPLICATIONS: CITGO Railroad Car Journal Oil No. 9 conforms to the requirements of AAR Specification M-963-84
for All-Year Journal Box Lubricating Oil.
It is designed for the lubrication of locomotive and railroad car journal bearings.

TYPICAL PROPERTIES:

CITGO RAILROAD CAR JOURNAL OIL NO. 9

Material Code 649110001

Gravity, ASTM D 4052, API 30.3


Density, lb/gal at 60F 7.28
Flash Point, COC, ASTM D 92, F (C) 442 (228)
Viscosity, ASTM D 445, cSt at 40C 64
cSt at 100C 8.8
ASTM D 2161, SUS at 100F 354
SUS at 210F 58
Viscosity Index, ASTM D 2270 110
Pour Point, Max, ASTM D 97, F (C) -22 (-30)
Color, ASTM D 1500 L1.0
Railroad Lubricants

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

CITGO PG
CIT e tOr oPl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10076C 1 0 0 7 6

Click Here for Return to


PI Sheet Table of Contents
172
P R O D U C T I N F O R M A T I O N

C I T G O R D - 9 6 9 A N D R D - 1 0 6 9
D I E S E L E N G I N E O I L S
Date 06/15

DESCRIPTION: CITGO RD-969 and RD-1069 are high dispersancy, reduced ash engine oils intended for use in
railroad locomotive diesel engines and other medium-speed stationary and marine diesel engines of
similar design. They meet the LMOA Generation V (GE Generation IV Long Life) quality requirements.
The Oronite OLOA 40000 additive system is utilized.

QUALITIES: Improved detergent/dispersent dramatically improves cleanliness


Superior oxidation and thermal stability inhibition prevents excessive viscosity increase
9 TBN designed for low and ultra- low sulfur fuels
Non-zinc formulation to protect silver bearing materials
Non-chlorinated to reduce used oil recycling costs
High viscosity index base in both oils for:
better oxidation resistance
good low-temperature performance
Outstanding protection from deposits
Maximum oil drain intervals
Enhanced particulate matter emissions control

PERFORMANCE LMOA Generation V


CAPABILITIES: EMD approved for Pointers Listing
GE Generation IV Long Life

APPLICATIONS: These oils meet the specifications of the major railroad diesel engine builders including General
Electric and Electro-Motive Division (EMD) of General Motors Corporation. They also meet the
requirements of the manufacturers of many large medium-speed diesel engines used in marine
and stationary service. They provide superior lubrication of most diesel engines used in inland
marine service in towboats and work boats.

Railroad Lubricants
General Electric diesel EMD diesel
ALCO diesel Enterprise diesel
Fairbanks-Morse diesel Superior diesel
Colt Pielstick Sulzer diesel
Baldwin-Lima-Hamilton

(Continued)

(Continued)

CITGO
CIP
TGe tOr o P
l eeut m
r o lCe ou rmp oCr oa rt p
i oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHo on u, sTt oe nx ,a sT e x M
a sa nu M
f aac dt ue r e
i nd Ui nS AU S A
C10073C 1 0 0 7 3

Click Here for Return to


PI Sheet Table of Contents
173
P R O D U C T I N F O R M A T I O N

C I T G O R D - 9 6 9 A N D R D - 1 0 6 9
D I E S E L E N G I N E O I L S
(Continued)
D ate 06/15 - (Continued)

TYPICAL PROPERTIES:

CITGO RD-969 AND RD-1069 DIESEL ENGINE OILS

Product RD-969 RD-1069

SAE Grade 40 20W-40

Material Code 649069001 649269001

Gravity, ASTM D 4052, API 28.7 29.3


Gravity, ASTM D 1298, Specific 60/60F 0.8833 0.8800
Density, lbs./gallon 7.35 7.33
Flash Point, ASTM D 92, COC, F (C) 518 (270) 482 (250)
Viscosity, ASTM D 445, cSt at 40C 144 134
Viscosity, ASTM D 445, cSt at 100C 14.8 15.1
Viscosity Index, ASTM D 2270 102 116
Visc ASTM D 5293, CCS, cP at -15C - 6,800
Pour Point, ASTM D 97, F (C) 0 (-18) -11 (-24)
Color, ASTM D 1500 D8 D8
Sulfated Ash, ASTM D 874, m% 1.0 1.0
Total Acid No., ASTM D 664, mg KOH/g 0.2 0.2
Total Base No., ASTM D 2896, mg KOH/g 9.0 9.0
Zinc, ppm <10 <10
Chlorine, ppm <50 <50

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.
Railroad Lubricants

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10073C 1 0 0 7 3

Click Here for Return to


PI Sheet Table of Contents
174
P R O D U C T I N F O R M A T I O N

CITGO RD-2 069 L E D IES E L EN G I N E O I L


Date 05/16

DESCRIPTION: CITGO RD-2069 LE Diesel Engine Oil is a new generation railroad diesel engine oil that supports
the EPA Tier 4 emissions requirements and is performance engineered for use in railroad locomotive
diesel engines and other medium-speed stationary and marine diesel engines of similar design.
CITGO RD-2069 LE Diesel Engine Oil is approved for LMOA Generation 7 Designate (supersedes
the performance requirements of LMOA Generation 6). The CITGO RD-2069 LE Diesel Engine Oil
utilizes the Oronite OLOA 42015 additive system.

QUALITIES: Improved detergent/dispersent dramatically improves cleanliness


Superior oxidation and nitration thermal stability inhibition prevents excessive viscosity increase
11 TBN designed for low and ultra-low sulfur fuels
Non-zinc formulation to protect silver bearing materials
Non-chlorinated to reduce used oil recycling costs
High viscosity index base in oil provides:
better oxidation resistance
good low-temperature performance
Outstanding protection from deposits
Maximum oil drain intervals
Enhanced particulate matter emissions control
Improved fuel economy versus single grade engines oils
Better start up cold temperature lubrication versus single grade engine oils

PERFORMANCE LMOA Generation 7 Designate (Supersedes LMOA Generation 6)


CAPABILITIES:

APPLICATIONS: CITGO RD-2069 LE Diesel Engine Oil meets the performance for General Electric Transportation
(GE) for Tier 4 locomotives and older models as well as Electro-Motive Division (EMD) Tier 3

Railroad Lubricants
locomotives and older models. This oil is formulated with the latest generation of additive technology
advancements with a proven track record of providing superior lubrication in a variety of diesel
engines used in coastal and inland marine service.
Consult owners manual for proper lubricant selection.

(Continued)

CCI TI TGGOO PPe et rt or ol el eu umm CCo or pr po or ar at it oi on n 8 80 00 0/ 2/ 24 48 8- 4- 46 68 84 4 HHo ou us st ot on n, , T Te ex xa as s MMa an nu uf af ac ct ut ur er ed d i ni n UUSSAA


C10244C 1 0 2 4 4

Click Here for Return to


PI Sheet Table of Contents
175
P R O D U C T I N F O R M A T I O N

CITGO RD-2 069 L E D IES E L EN G I N E O I L


(Continued)
D ate 05/16 - (Continued)

TYPICAL PROPERTIES:

CITGO RD-2069 LE DIESEL ENGINE OIL

SAE Grade 20W-40

Material Code 649281001

Gravity, ASTM D4052, API 28.7


Gravity, ASTM D1298, Specific 60/60F 0.8820
Density, lbs/gallon 7.34
Flash Point, ASTM D92, COC, F (C) 496 (258)
Viscosity, ASTM D445, cSt at 40C 140
cSt at 100C 15.2
Viscosity Index, ASTM D2270 110
ASTM D5293, CCS, cP at -15C 7,800
Pour Point, ASTM D97, F (C) -27 (-33)
Color, ASTM D1500 L4.5
Sulfated Ash, ASTM D874, m% 1.15
Total Acid No., ASTM D664, mg KOH/g 0.7
Total Base No., ASTM D2896, mg KOH/g 11
Zinc, ppm <10
Chlorine, ppm <50

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.
Railroad Lubricants

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10244C 1 0 2 4 4

Click Here for Return to


PI Sheet Table of Contents
176
P R O D U C T I N F O R M A T I O N

C I T G O B A R & C H A I N O I L
Date 07/15

DESCRIPTION: CITGO Bar & Chain Oil is a suitable choice for home and commercial users. It contains components to
reduce wear, guard against rust and enhance metal adhesion to reduce spatter. Designed for use over
a wide temperature range.

BENEFITS: Lubricates and Cools Chain and Bar


Formulated to Reduce Spatter
Guards Against Rust
Provides Wear Protection
NOTE: NOT FOR USE IN ENGINES!

TYPICAL PROPERTIES:

CITGO BAR & CHAIN OIL

Material Code 638110001


SAE Grade >20
Gravity, ASTM D 287, API 28
Pounds/Gallon at 60F 7.3
Flash Point, ASTM D 92, COC, F (C) 284 (140)
Pour Point, ASTM D 97, F (C) -29 (-20)
Viscosities:
cSt at 40C 68
cSt at 100C, 9.5
Appearance Dark Amber

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

Functional Products

CITGO PG
CIT e tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10227C 1 0 2 2 7

Click Here for Return to


PI Sheet Table of Contents
177
P R O D U C T I N F O R M A T I O N

C I T G O C O N C R E T E F O R M O I L
Date 06/15

DESCRIPTION: CITGO Concrete Form Oil is a light colored, non-staining, low volatile organic content (VOC) oil for
use on concrete forms where an excellent surface finish is desired.

QUALITIES:
CITGO Concrete Form Oil is specially formulated with high quality base stocks and additives including
a combination spreading and release agent which:
Provides excellent surface finish.
Provides even spreading of the oil on wood or steel forms and prevent cement sticking to forms.
Prevents staining, build-up and corrosion of forms.
Meets U. S. EPA AIM and OTC Phase I State VOC requirements.

APPLICATIONS: CITGO Concrete Form Oil may be used for all concrete form applications. With excellent non-
staining characteristics, it is recommended for applications requiring excellent surface finish including
production of burial vaults, white stone furniture and other specialty concrete products.
Meets EPA AIM VOC Requirements
VOC EPA Method 24

US EPA OTC Phase I CITGO


AIM VOC Limit State Limit Form Oil
TYPICAL PROPERTIES:

CITGO CONCRETE FORM OIL

Material Code 643205001

Gravity, ASTM D 4052, API 27


Density, lb/gal at 60F 7.43
Flash Point, COC, Min., ASTM D 92, F (C) 384 (196)
Viscosity, ASTM D 445, cSt at 040C 20
Viscosity, ASTM D 445, cSt at 100C 3.8
Vscost ASTM D 2161, SUS at 100F 106
Vscost ASTM D 2161, SUS at 210F 39
Viscosity Index, ASTM D 2270 70
Pour Point, Max, ASTM D 97, F (C) -33 (-36)
Color, ASTM D 1500 1.0
Saponification No., ASTM D 94 10.8
Copper Corrosion, ASTM D 130 1A
Functional Products

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10079C 1 0 0 7 9

Click Here for Return to


PI Sheet Table of Contents
178
P R O D U C T I N F O R M A T I O N

C I T G O D I A M O N D O I L S
Date 06/15

DESCRIPTION: CITGO Diamond Oils are low viscosity, light color, low fluid-friction lubricants, designed primarily for
use in machinery in the textile industry. The properties of these oils also make them suitable for a
number of other applications.

QUALITIES: CITGO Diamond Oils provide lubrication and low fluid-friction loss required for excellent performance
in high-speed spindle bearings and are compatible with all types of filtration systems.
Their superior oxidation stability under moderate temperature conditions and excellent water
separation capability make them outstanding machine oils for use where lubrication and temperature
conditions are mild.

APPLICATIONS: CITGO Diamond Oils are recommended for general machinery lubrication, for knitting machinery
needle heads, textile machinery spindles and twister rings, sewing machines and small electric motors.
They can be used in all types of dispensing systems including centralized mist and air-line lubricators.

TYPICAL PROPERTIES:

CITGO DIAMOND OILS

ISO Vis Grade 12 20

Material Code 633091001 633092001

Gravity, ASTM D 4052, API 39.0 33.3


Flash Point, ASTM D 92, C 175 185
Viscosity, ASTM D 445, cSt at 40C 13.2 20
Pour Point, ASTM D 97, F (C) -35 (-32) 15 (-9)
Color, ASTM D 1500 L0.5 L1.5
Water Separation time, ASTM D 1401,
Minutes at 130F 10 30

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

Functional Products

CITGO PG
CIT e tOr oPl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10127C 1 0 1 2 7

Click Here for Return to


PI Sheet Table of Contents
179
P R O D U C T I N F O R M A T I O N

C I T G O H Y D R A U L I C / P R E S S O I L 6 8
Date 08/15

DESCRIPTION: CITGO Hydraulic/Press Oil 68 is formulated with highly refined, premium base oils and an ashless
antiwear additive system to provide outstanding protection for demanding printing press hydraulic
systems. CITGO Hydraulic/Press Oil 68 does not rely on zinc-type antiwear additives which is an
important consideration in various press applications.

BENEFITS: CITGO Hydraulic/Press Oil 68:


Contains no heavy metals such as zinc
Offers thermal stability to virtually eliminate heat-related sludge deposits
Provides rust and corrosion protection
Separates readily from water
Contains inhibitors to minimize foaming and air entrainment
Provides antiwear protection to pumps, motors and other hydraulic circuit components
Extends fluid service life with a balanced additive system to handle severe operating conditions
Contains an anti-leak agent to aid in maintaining the condition and life of elastomer materials
Offers great compatibility with CITGO Press Oil 68

APPLICATIONS: CITGO Hydraulic/Press Oil 68 is recommended for printing press service in vane, piston and gear
pumps when used in accordance with the manufacturers recommendations. CITGO Hydraulic/Press
Oil 68 is within the viscosity range covered in Goss SBM 5078 for gear and bearing lubricants.
Use of Hydraulic/Press Oil 68 assures unintended mixing will not result in viscosity degradation
of the lubricant covered by Goss SMB 5078.

TYPICAL PROPERTIES:

CITGO HYDRAULIC/PRESS OIL 68

Grade 68
Material Code 661290001
Gravity, ASTM D 4052, API 29.3
Density, lb/gal 7.33
Flash Point, (COC), ASTM D 92, F (C) 468 (242)
Viscosity, ASTM D 445, cSt at 40C 67.6
Viscosity, ASTM D 445, cSt at 100C 8.5
Vscosy,ASTM D 2161, SUS at 100F 351
Vscosy ASTM D 2161, SUS at 210F 55
Viscosity Index, ASTM D 2270 95
Pour Point, ASTM D 97, F (C) -11 (-24)
Color, ASTM D 1500 L1.5
Total Acid No., ASTM D 664, mg KOH/g 0.10
Copper Corrosion, 3 hr at 100C, ASTM D 130 1A
Rust Test, ASTM D 665 A, B Pass
Four Ball Wear, ASTM D 2266, at 40 kg, mm 0.50
Foam Test, Seq. I, ml 0-0
Foam Test, Seq. II, ml 20-0
Foam Test, Seq. III, ml 0-0
Functional Products

Water Separability, at 130F, ASTM D 1401 (mls) 40-40-0

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10082C 1 0 0 8 2

Click Here for Return to


PI Sheet Table of Contents
180
P R O D U C T I N F O R M A T I O N

C I T G O H Y T H E R M
O I L 4 6
Date 07/15

DESCRIPTION: CITGO Hytherm Oil 46 is a premium quality heat transfer oil formulated with high viscosity index
paraffinic base stocks and a special high temperature detergent/dispersant additive package.

QUALITIES: CITGO Hytherm Oil 46 provides high specific heat and good thermal conductivity at all temperatures
for highly efficient heat transfer. CITGO Hytherm Oil 46 contains rust and oxidation inhibitors and a
special additive package to help maintain system cleanliness and operational performance, reducing
downtime and maintenance costs.

APPLICATIONS: CITGO Hytherm Oil 46 meets the exacting requirements of both open and closed heat transfer
systems, at temperatures up to 600F.

CITGO HYTHERM OIL 46 PHYSICAL DATA


Specific Thermal
Specific Heat Conductivity Viscosity
Temp., F Gravity BTU/lb/F BTU/hr/ft2/F cSt
60 0.871 0.442 0.0790 175
100 0.857 0.463 0.0770 51
200 0.824 0.517 0.0738 8.0
300 0.792 0.570 0.0715 2.9
400 0.761 0.624 0.0697 1.6
500 0.731 0.678 0.0675 1.0
600 0.697 0.732 0.0647 0.8

TYPICAL PROPERTIES:
CITGO HYTHERM OIL 46

ISO VIS Grade (SAE Grade) 46


Material Code 637130001
Gravity, ASTM D 4052, API 31.5
Density, lb/gal at 60F 7.25
Flash Point, ASTM D 92, F 453
Viscosity, ASTM D 445, cSt, at 40C 48.5
cSt, at 100F 7.0
Viscosity Index, ASTM D 2270 100
Pour Point, ASTM D 97, F 16
Color, ASTM D 1500 2.0
Acid No., ASTM D 974 <0.01
Volume Factor, % per F 0.033
Distillation, F, ASTM D 2887, IBP, F 650
5% 734
10% 771
50% 858
Functional Products

95% 944

CITGO and Hytherm are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.

CITGO
CIP
TGe tOr o P
l eeut m
r o lCe ou rmp oCr oa rt p
i oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHo on u, sTt oe nx ,a sT e x M
a sa nu M
f aac dt ue r e
i nd Ui nS AU S A
C10083C 1 0 0 8 3

Click Here for Return to


PI Sheet Table of Contents
181
P R O D U C T I N F O R M A T I O N

C I T G O I C E M A C H I N E O I L 6 8
Date 07/15

DESCRIPTION: CITGO Ice Machine Oil 68 is a highly refined, pour depressed, paraffinic oil developed especially to
lubricate ammonia compressors in industrial refrigeration systems.

BENEFITS: Demulsibility properties provide quick and complete separation of lubricant from water or refrigerant
Foam inhibited with non-silicon additive
Helps protect against formation of harmful deposits on exhaust ports and other compressor parts
Protects bearings and other metal surfaces from corrosion
Minimizes formation of sludge and varnish build-up

APPLICATIONS: CITGO Ice Machine Oil 68 is designed primarily for the complete lubrication of industrial type
evaporating ice machines and crankcases, cylinders and bearings of refrigeration compressors using
ammonia refrigerant. Meets requirements of Frick Co. Refrigeration Oil #3.
In addition to its use in refrigeration compressors, CITGO Ice Machine Oil 68 is recommended for
general oiling of bearings, open chains and linkages operating under conditions of mild unit loading
and mild temperatures and humidity, where an additive type oil is not required.

TYPICAL PROPERTIES:

CITGO ICE MACHINE OIL 68

Material Code 637131001

Gravity, ASTM D 4052, API 31.0


Flash Point, ASTM D 92, F (C) 425 (218)
Viscosity, ASTM D 2161, SUS at 100F 350
Viscosity, ASTM D 445, cSt at 40C 68
Pour Point, ASTM D 97, F (C) -30 (-34)
Color ASTM D 1500 2.0

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.
Functional Products

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10122C 1 0 1 2 2

Click Here for Return to


PI Sheet Table of Contents
182
P R O D U C T I N F O R M A T I O N

C I T G O N O R T H S T A R
R E F R I G E R A T I O N O I L S
Date 06/15

DESCRIPTION: CITGO North Star Refrigeration Oils are premium quality naphthenic oils, blended for use in
refrigeration compressors.

QUALITIES: Special properties provide excellent refrigeration compressor lubrication including:


Light color
Low acid number
Low pour and floc points
Excellent foam resistance
Good seal control
Control stability and compatibility with refrigerants

APPLICATIONS: CITGO North Star Refrigeration Oils are recommended for use in refrigeration compressors and
other low-temperature applications, including air conditioning systems. They are recommended for
other extremely low temperature applications requiring low temperature fluidity and floc points of
-50F or lower. Not recommended for use with hydrofluorocarbons (HFC) such as R-134A.

TYPICAL PROPERTIES:

CITGO NORTH STAR REFRIGERATION OILS

GRADE 32 54
Material Code 643102001 643105001
Gravity, ASTM D 4052, API 26.0 25.4
Density, lb/gal at 60F 7.48 7.51
Flash Point, ASTM D 92, F (C), COC 370 (188) 392 (200)
Viscosity, ASTM D 445, cSt at 40C 32.0 55
cSt at 100C 4.7 6.7
ASTM D 2161, SUS at 100F 167 287
SUS at 210F 42 48.6
Viscosity Index, ASTM D 2270 33 63
Pour Point, ASTM D 97, F (C) -44 (-42) -49 (-45)
Floc Point, F (C) -62 (-52) -56 (-49)
Color, ASTM D 1500 L1.0 L1.5
Aniline Point, ASTM D 611, F (C) 178 (81) 181 (83)
Neutralization No., ASTM D 974 0.01 0.01
Foam Inhibitor Yes Yes
Foam, ASTM D 892, Sequence I 0-0 0-0
Sequence II 10-0 10-0
Sequence III 0-0 0-0

CITGO and North Star are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Functional Products

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10085C 1 0 0 8 5

Click Here for Return to


PI Sheet Table of Contents
183
P R O D U C T I N F O R M A T I O N

C I T G O N O R T H S T A R
R E F R I G E R A T I O N O I L 6 8
Date 06/15

DESCRIPTION: CITGO North Star Refrigeration Oil 68 is a lubricant designed for use in refrigeration compressors.

QUALITIES: Special properties to provide good refrigeration compressor lubrication include:


Very light color
Very low acid number
Low pour and floc points
Excellent foam resistance
Good seal conditioning
Control stability and compatibility with refrigerants

APPLICATIONS: CITGO North Star Refrigeration Oil 68 is recommended for use in refrigeration compressors and other
low-temperature applications, including air conditioning systems. It is recommended for extremely low
temperature applications requiring low floc points. Not recommended for use with hydrofluorocarbons
(HFC) such as R-134A.

TYPICAL PROPERTIES:

CITGO NORTH STAR REFRIGERATION OIL 68

GRADE 68
Material Code 643108001
Gravity, ASTM D 4052, API 28.8
Density, lb/gal at 60F 7.36
Flash Point, ASTM D 92, F (C), COC 405 (207)
Viscosity, ASTM D 445, cSt at 40C 65
cSt at 100C 8.3
ASTM D 2161, SUS at 100F 335
SUS at 210F 54
Viscosity Index, ASTM D 2270 95
Pour Point, ASTM D 97, F (C) -42 (-44)
Color, ASTM D 1500 L0.5
Neutralization No., ASTM D 974 0.01
Foam Inhibitor Yes
Foam, ASTM D 892, Sequence I 10-0
Sequence II 10-0
Sequence III 10-0

CITGO and North Star are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Functional Products

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10185C 1 0 1 8 5

Click Here for Return to


PI Sheet Table of Contents
184
P R O D U C T I N F O R M A T I O N

C I T G O P A C E M A K E R
H V O I L S
Date 06/15

DESCRIPTION: CITGO Pacemaker HV Oils are high quality, high boiling range, low vapor pressure, petroleum fluids.
These oils are designed especially for use in high vacuum, vacuum pump applications where a
mineral-type high quality oil is required.

QUALITIES: CITGO Pacemaker HV Oils have high initial boiling points and low vapor pressures. They are
produced with special processes and quality assurance procedures to excellent proper vacuum
pump performance.
These products have inherently high oxidation resistance, thermal stability and low chemical reactivity.
Special product handling assures very low moisture and volatiles contamination which could adversely
affect vapor pressure characteristics. Care should be taken to keep containers of CITGO Pacemaker
HV Oils tightly sealed and stored in areas that do not have wide variations in temperature.

CITGO Pacemaker HV-39 is designed for direct drive vacuum pumps such as WELCH, YELLOW
APPLICATIONS: JACKET, PRECISION, LEYBOLD-HERAEUS, EDWARDS and ALCATEL where lower viscosity
vacuum pump oil is required to prevent heat build-up, provide high ultimate vacuum, and handle high
vacuum pump speeds.
Pacemaker HV-68 is designed for belt driven vacuum pumps such as WELCH and CENCO.

TYPICAL PROPERTIES:

CITGO PACEMAKER HV OILS

Grade HV-39 HV-68

Material Code 634104001 634105001

Gravity, ASTM D 4052, API 31.7 32.3


Density, lb/gal at 60F 7.22 7.2
Flash Point, COC, ASTM D 92, F (C) 435 (224) 465 (241)
Viscosity, ASTM D 445, cSt at 40C 42 67.7
Viscosity, ASTM D 445, cSt at 100C 6.4 9.2
Viscosit ,ASTM D 2161, SUS at 100F 218 338
Viscosit ,ASTM D 2161, SUS at 210F 47 54
Viscosity Index, ASTM D 2270 101 113
Pour Point, ASTM D 97, F (C), Max. +5 (-15) 0 (-18)
Color, ASTM D 1500 L0.5 L0.5
Neutralization No., ASTM D 974, mg KOH/ml <0.05 <0.05
Copper Corrosion, ASTM D 130, 3 hours at 100C 1A 1A
Carbon Residue, ASTM D 4530, wt, % <0.01 <0.02
Vapor Pressure, ASTM D 5190, Torr. @ 100F (37C) 0.00025 0.00065

CITGO and Pacemaker are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
Functional Products

trademarks are the property of their respective owners.

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, sTt oe nx ,a sT e x M
a sa n u M
f aacdt u
ere
i nd Ui nS AU S A
C10086C 1 0 0 8 6

Click Here for Return to


PI Sheet Table of Contents
185
P R O D U C T I N F O R M A T I O N

C I T G O P A C K G A R D 2 2 0
Date 08/15

DESCRIPTION: CITGO PackGard 220 is specifically designed for packing lubrication of reciprocating, positive
displacement well service plunger pumps utilized in oil and gas production.

BENEFITS: CITGO PackGard 220 offers:


Excellent metal wetting (preferential to water) and extra adhesiveness for more effective lubrication
Full Extreme Pressure (EP) wear protection, optimized with emulsification properties, guards against
wear in high moisture conditions
Rust and corrosion protection
Antifoam, high viscosity index, low pour point and excellent stability over a wide range of conditions

APPLICATIONS: CITGO PackGard 220 is recommended for and meets general packing lubricant requirements of
well service plunger pump manufacturers including FMC Technologies, Gardner Denver, and
Weir Oil & Gas.

TYPICAL PROPERTIES:

CITGO PACKGARD 220

ISO Grade 220


Material Code 633223001
Gravity, ASTM D 4052, API 28.8
Density, lb/gal at 60F 7.35
Flash Point, ASTM D 92,F (C) 388 (198)
Viscosity, cSt at 40C 223
100C 20.4
Viscosity Index 109
Pour Point, ASTM D 97, F (C) -11 (-24)
Copper Corrosion, ASTM D 130 1A
Rust Test, A&B, ASTM D 665 Pass
Timken EP Test, ASTM D 2782, lbs. 65
Falex Load Test, ASTM D 3233, ft-lbs. >2000
Steam Emulsion Number, seconds >1200

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.
Functional Products

CIT
CITGO PGe tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, sTt oe nx ,a sT e x M
a sa n u M
f aacdt u
ere
i nd Ui nS AU S A
C10231C 1 0 2 3 1

Click Here for Return to


PI Sheet Table of Contents
186
P R O D U C T I N F O R M A T I O N

C I T G O P R E S S O I L 6 8
Date 06/15

DESCRIPTION: CITGO Press Oil 68 is formulated with premium, highly refined base oils, a unique selection of
performance additives, and synthetic components to meet the demanding gear and bearing lubrication
requirements found in printing press systems.

BENEFITS: Provides extreme pressure and antiwear protection on gears and bearings.
Exhibits outstanding thermal and oxidative stability.
Provides rust and corrosion protection.
Prevents sticking of eccentrics.
Offers increased gear protection against shock loading and wear.
Contains inhibitors to minimize foaming and air entrainment.
Provides excellent adhesion and cohesion on metal parts.
Extends fluid service life with a balanced additive system to handle severe press operating conditions.
Contains no heavy metals.
Offers improved viscosity control, minimum viscosity shear.

APPLICATIONS: CITGO Press Oil 68 is recommended for service for high speed gearing and bearing applications found
in the printing industry. CITGO Press Oil 68 exceeds the performance requirements of Goss SBM
5078 and Man Roland Presses.
TYPICAL PROPERTIES:

CITGO PRESS OIL 68

Grade 68
Material Code 633821001
Gravity, ASTM D 4052, API 29.2
Density, lb/gal 7.33
Flash Point, (COC), ASTM D 92, F (C) 439 (226)
Viscosity, ASTM D 445, cSt at 40C 68.1
Viscosity, ASTM D 445, cSt at 100C 10.28
Vscos ASTM D 2161, SUS at 100F 320
Vscos ASTM D 2161, SUS at 210F 62
Viscosity Index ASTM D 2270 117
Pour Point, ASTM D 97, F (C) -27 (-33)
Color, ASTM D 1500 L2.5
Copper Corrosion, 3 hr at 100C, ASTM D 130 1A
Rust Test, D 665 A, B Pass
Four Ball Wear at ASTM D 4172, 40 kg, mm 0.36
Four Ball Wear Index, ASTM D 2783 55.5
Four Ball Wear, Index (Weld Point), Kg 250
Timken OK Load, ASTM D 2782, lb. 50
Foam Test, Seq. I, ml 0-0
Seq. II, ml 50-0
Seq. III, ml 0-0
Functional Products

Tackifier Yes

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

CITGO PG
CIT e tOr oPl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10087C 1 0 0 8 7

Click Here for Return to


PI Sheet Table of Contents
187
P R O D U C T I N F O R M A T I O N

C I T G O R O C K D R I L L O I L S
Date 06/15

DESCRIPTION: CITGO Rock Drill Oils are premium lubricants designed for protection of pneumatic equipment
subjected to excessive moisture or water spray.

QUALITIES: CITGO Rock Drill Oils work to ensure outstanding equipment protection by providing:
Excellent metal wetting (preferential to water) and extra adhesiveness for more effective lubrication.
Extreme Pressure (EP) wear protection, optimized with emulsification properties, guards against
wear in high moisture conditions.
Premium rust and corrosion protection and antifoam properties.
High viscosity index, low pour point temperature and excellent stability enhance lubrication of
pneumatic equipment over a wide range of conditions.

APPLICATIONS: CITGO Rock Drill Oils meet the general requirements of major manufacturers of rock drills, jack
hammers, and other types of pneumatic percussion equipment manufactured by Ingersoll-Rand,
Gardner-Denver, Mincon, and others.

TYPICAL PROPERTIES:

CITGO ROCK DRILL OILS

ISO Grade 46 100 320

Material Code 633212001 633214001 633217001

Gravity, ASTM D 4052, API 31.7 30.2 26.4


Density, lb/gal at 60F 7.22 7.26 7.46
Flash Point, ASTM D 92,F (C) 410 (210) 486 (252) 504 (262)
Viscosity, cSt at 040C 47.5 103 328
Viscosity, cSt at 100C 7.7 12.1 26.4
Viscosity Index 136 109 105
Pour Point, ASTM D 97, F (C) -17 (-27) -11 (-24) 10 (-12)
Copper Corrosion,
ASTM D 130 1A 1A 1A
Timken EP Test, ASTM D 2782, lbs. >65 >65 >65
Falex Load Test, ASTM D 3233,
ft-lbs. >2000 >2000 >2000
Steam Emulsion
Number, seconds >1200 >1200 >1200

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.
Functional Products

CITGO PG
CIT e tOr oPl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10089C 1 0 0 8 9

Click Here for Return to


PI Sheet Table of Contents
188
P R O D U C T I N F O R M A T I O N

C I T G O S A T I S O L C O N C R E T E
F O R M R E L E A S E
Date 06/15

DESCRIPTION: CITGO SATISOL Concrete Form Release is a high performance water emulsifiable, concrete form
release agent. SATISOL meets Federal and State Regulations for VOC release.

QUALITIES: CITGO SATISOL provides:


Less Environmental Impact Increased Form Life
Reduces Spalling, Bug Holes, Voids Non-Corrosive
Minimizes Form Cleaning and Maintenance U.S. EPA AIM and OTC Phase I State VOC requirement
Non-Staining

APPLICATIONS: CITGO SATISOL is designed to be stable in both hard and soft water; as such, no special water is
needed to make the working solution. The concentrate is designed to be used at a treat rate of 4
to 1 (water/oil); exceptional results have been obtained at this treat rate. The concentrate must be
adequately mixed to insure proper thickening and performance. Do not allow material to freeze.
Mixing Instructions: The Satisol Concentrate should always be added to the water and mixed
thoroughly to insure proper emulsion formation.

TYPICAL PROPERTIES:

CITGO SATISOL CONCRETE FORM RELEASE

Material Code 639560001

Specific Gravity, ASTM D 4052, at 60F 0.924


Density lbs/gal 7.70
Color Dark Amber
Appearance Slight Haze
Viscosity, ASTM D 445, cSt at 40C 33.5
SUS at 100F 158
Pour Point ASTM D 97 (Neat), F (C) -60 (-51)
Flash Point ASTM D 92 (Neat), F (C), 323 (162)
Copper Corrosion ASTM D 130, 25% Solution 1A
Rust Test, ASTM D 665A , 25% Solution Pass
Volatile Organic Compounds ASTM D 2369, Neat Solution 14%
Volatile Organic Compounds, Grams/Liter, Neat Solution 130
Freeze Pt. (25% solution) F (C) 30 (-1)

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.
Functional Products

CITGO PG
CIT e tOr oPl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10141C 1 0 1 4 1

Click Here for Return to


PI Sheet Table of Contents
189
P R O D U C T I N F O R M A T I O N

C I T G O S L I D E R I T E
O I L S
Date 1/17

DESCRIPTION: CITGO SlideRite Oils are designed for use on slideways of machine tools.

QUALITIES: CITGO SlideRite Oils contain special non-corrosive additives which provide the necessary
qualities to protect against the occurrence of stick-slip. They impart good metal-wetting,
adhesiveness, and EP characteristics which effectively eliminate chatter and scoring in the
operation of machine tool ways. Some slideway lubricants tend to form an emulsion with
coolants in machining centers, making it difficult to maintain clean and effective coolants.
However, CITGO SlideRite Oils are specially designed to minimize this problem. As a result,
these oils are particularly recommended for use in applications where synthetic coolants or
soluble oil emulsions are used. CITGO SlideRite Oils are light colored, have a very mild odor,
and provide good visibility of slideways.
CITGO SlideRite 68C Oil is specially formulated to be very light colored to provide exceptional
visibility of the slideways. It also contains extra tackiness additive.
The ISO VG 32, ISO VG 68 and ISO VG 220 grades of CITGO SlideRite Oils have been
formulated to meet requirements of the Fives Group (formerly Cincinnati Machine) specifications
covering machine tool way lubricants.
Grade Fives Cincinnati Specification
CITGO SlideRite 32 P-53*
CITGO SlideRite 68 P-47
CITGO SlideRite 220 P-50

*NOTE: Fives Group Specification P-53 is a Combination Hydraulic and Way Oil Specification.

APPLICATIONS: CITGO SlideRite 32 is suitable for use in central systems for lubricating hydraulic pump units
and slideways and can be used where a premium grade light viscosity oil is needed.
CITGO SlideRite 68 is suitable for use as a slideway lubricant where a heavy-medium viscosity
oil is specified.
CITGO SlideRite 220 and CITGO SlideRite 320 are suitable for use as a slideway lubricant
where a heavy viscosity oil is specified.

(Continued)
Functional Products

CITGO Petroleum Corporation 800/248-4684 Houston, T


Teexxaass M
M aa nn uu ff aa cc tt uu rr ee dd ii nn U
U SS AA
C 10090
C10090

Click Here for Return to


PI Sheet Table of Contents
190
P R O D U C T I N F O R M A T I O N

C I T G O S L I D E R I T E
O I L S
Date 1/17 - (Continued)

TYPICAL PROPERTIES:

CITGO SLIDERITE OILS

Grade 32 68 220 320

Material Code 637203001 637210001 637220001 637320001


Gravity, ASTM D4052, API 31.5 29.5 29.8 26.9
Density, lb/gal at 60F 7.228 7.32 7.305 7.43
Flash Point, ASTM D92,
F (C), COC 392 (200) 428 (220) 455 (235) 482 (250)
Viscosity,
ASTM D445,
cSt at 40C 32.9 69.0 220 320
cSt at 100C 5.9 9.1 19.6 25.9
ASTM D2161,
SUS at 100F 169 357 1163 1482
SUS at 210F 46 57 99.2 124.1
Viscosity Index, ASTM D2270 123 105 100 100
Pour Point, ASTM D97, F (C) -27 (-33) -17 (-27) +10 (-12) +10 (-12)
Color, ASTM D1500 L1.5 L2.5 L2.5 L3.5
Texture Tacky Tacky Tacky Tacky
Stick-Slip Coefficient Ratio,
Max.(1) 0.8 0.8 0.8 0.8
Gleittechnik Demulsibility Test Pass Pass Pass Pass

ISO VG No. 32 68 220 320


Fives Group Specification P-53 P-47 P-50

Note: (1) Ratio of the coefficients of kinetic friction to static friction.

CITGO and SlideRite are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.

Functional Products

C I T G O P e t r o l e u m C o r p o r a t i o n 8 0 0 / 2 4 8 - 4 6 8 4 H o u s t o n , Te x a s M a n u f a c t u r e d i n U S A
C10090
C10090

Click Here for Return to


PI Sheet Table of Contents
191
P R O D U C T I N F O R M A T I O N

C I T G O W I R E L I N E L U B R I C A N T S
Date 03/16

DESCRIPTION: CITGO Wireline Lubricants are premium viscous, tacky lubricants and sealants designed specifically
for use in in oil and gas well logging operations and other wireline applications where a lubricating
dynamic seal is required. Formulated with advanced corrosion inhibitors to protect against corrosion in
harsh high pressure down-hole environments where exposure to moisture, H2S, and corrosive fluids
occur. CITGO Wireline Lubricants are available in several viscosity grades for ease of application in
varying temperature conditions.
QUALITIES: CITGO Wireline Lubricants offer:
Excellent sealing capability
Excellent adhesion to prevent sling off, splatter and drip
Outstanding corrosion protection
Ease of application
Excellent low temperature performance

APPLICATIONS: CITGO Wireline Lubricants are recommended as a lubricant/sealant for braided wirelines, cables and
slicklines used in down-hole operations including oil and gas well logging, pipe recovery, and reservoir
analyses.
TYPICAL PROPERTIES:
CITGO WIRELINE LUBRICANTS

Material Number 637163001 637167001 637169001 637170001 637172001


Grade 68 220 460 680 1500
Specific Gravity, 60F 0.897 0.895 0.890 0.888 0.880
Pounds per Gallon 7.47 7.45 7.41 7.39 7.33
Color 0.5 3.5 3.5 4.5 5.0
Appearance Light Amber Amber Amber Amber Amber
Flash Point, C (F) 170 (340) 204 (400) 227 (440) 227 (440) 230 (446)
Viscosity
cSt @ 40C 68.4 220 460 680 1,500
cSt @ 100C 10.8 22.2 42.6 62.1 120
Pour Point, C (F) -33 (-27) -18 (0) -15 (5) -18 (0) -21 (-6)
Rust Test, D-665B Pass Pass Pass Pass Pass
Texture Tacky Liquid Tacky Liquid Tacky Liquid Tacky Liquid Tacky Liquid

Material Number 637174001 637179001 637175001 637176001


Grade 5000 7500 10000 12000
Specific Gravity, 60F 0.872 0.862 0.864 0.863
Pounds per Gallon 7.26 7.18 7.20 7.19
Color 5.5 2.5 6.0 L0.5
Appearance Amber Amber Amber Amber
Flash Point, C (F) 230 (446) 189 (373) 230 (446) 174 (345)
Viscosity
cSt @ 40C 5,000 7,500 9,200 12000
cSt @ 100C 400 674 800 1100
Pour Point, C (F) -24 (-11) -28 (-18) -21 (-6) -18 (0)
Rust Test, D-665B Pass Pass Pass Pass
Texture Tacky Liquid Tacky Liquid Tacky Liquid Tacky Liquid
NOTE: These products are NOT designed to be used as wire rope lubricants on draglines, cranes, elevators, shovels, drilling
rigs, suspension bridges, or cable stayed bridges.
Functional Products

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change
without notice.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10208C 1 0 2 0 8

Click Here for Return to


PI Sheet Table of Contents
192
P R O D U C T I N F O R M A T I O N

Compressor Lubricants
C I T G O C O M P K L E E N
S Y N T H E T I C
C L E A N E R
Date 06/22

DESCRIPTION: CITGO CompKleen Synthetic Cleaner is a high performance cleaner designed to loosen, remove and
suspend the varnish, sludge, and carbon typically found in rotary screw and rotary vane compressors.
These deposits can result in operational problems plus increased maintenance and operational cost.

BENEFITS: CITGO CompKleen Synthetic Cleaner is designed for use as a supplemental lubricant additive to
remove sludge, varnish, and carbon from the compressor system while in operation. Using CITGO
CompKleen Synthetic Cleaner virtually eliminates the need for disassembling for cleaning. For
maximum benefit, use CITGO CompKleen Synthetic Cleaner prior to each lubricant change.

USAGE Add one gallon of CITGO CompKleen Synthetic Cleaner concentrate for every 10 gallons of
DIRECTIONS: compressor oil in the unit; drain enough oil from the system unit to allow for the addition of the
concentrate. Continue to operate the compressor for 40 to 60 hours, allowing the treated oil to
circulate through the system to loosen, dissolve and suspend the deposits. It is very important that the
fluid be drained from the system while hot to avoid re-depositing the contaminants. After draining the
fluid, replace the filters and refill with the proper CITGO lubricant.
CITGO CompKleen can also be used to clean and remove deposits from hydraulic systems, gear
boxes, heat transfer systems, and machine tools.
NOTE: It is the users responsibility to follow instructions, and ensure proper and complete drainage.
Product sampling and testing are highly recommended. For additional technical information and
assistance, please contact the CITGO Lubricants Product Answer Line at 800-248-4684 or email
lubeshelp@citgo.com.

TYPICAL PROPERTIES:

CITGO COMPKLEEN SYNTHETIC CLEANER

Material Code 632599001

API Gravity, ASTM D 4052, API 12.2


Density lb/gal 8.20
Color ASTM, D 1500 1.0
Viscosity, ASTM D 445, cSt at 40C 66
cSt at 100C 7.3
Flash Point PM ASTM D 93, F (C) 410 (210)

CITGO and CompKleen are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGO PG
CIT e tOr oPl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10121C 1 0 1 2 1

Click Here for Return to


PI Sheet Table of Contents
193
P R O D U C T I N F O R M A T I O N
Compressor Lubricants

CITGO COMP R E S S OR OIL S 3 5L P A N D 4 5 L P


Date 01/16

DESCRIPTION: CITGO Compressor Oils 35LP and 45LP are high-quality non-foaming, non-detergent compressor
cylinder lubricants engineered for the requirements of air and gas compressors and older stationary
natural gas engines that utilize activated clay filtration.
CITGO Compressor Oils 35LP and 45LP employ high VI paraffinic base stocks with additives to inhibit
oxidation, rust and corrosion, and possess additional demulsibility characteristics.

QUALITIES: High viscosity index provides superior viscosity-temperature characteristics


Low pour point for cold climate operations
Low carbon forming tendencies together with oxidation resistance minimizes exhaust valve deposits

APPLICATIONS: CITGO Compressor Oils 35LP and 45LP are recommended for cylinder lubrication of reciprocating air
and natural gas compressors.

TYPICAL PROPERTIES:

CITGO COMPRESSOR OILS 35LP AND 45LP

35LP 45LP

Material Code 633746001 633748001

Gravity, ASTM D4052, API 29.2 30.98


Density, lb/gal 7.284 7.25
Flash Point, ASTM D92, F (C) 554 (290) 475 (246)
Viscosity, ASTM D445, cSt at 40C 115 171
cSt at 100C 12.3 19.0
Viscosity Index, ASTM D2270 97 126
Pour Point, ASTM D97, F (C) -17 (-27) -27 (-33)
Color, ASTM D1500 L2.0 L0.5
Total Acid No. mgKOH/g, ASTM D664 0.1 0.23
Foam Test, ASTM D892, Seq. I, mL 0-0 0-0
Seq. II, mL 0-0 0-0
Seq. III, mL 0-0 0-0
RPVOT, Oxidation, ASTM D2272, minutes 320 525

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

CCI T
I TGGOO PPeet rt rool el euumm CCoor rppoor raat it oi onn 880000/ 2
/ 24488- -44668844 HHoouus st o
t onn, , TTeex xaas s MMaannuuf a
f ac ct u
t ur reedd i ni n UUSSAA
C10139C 1 0 1 3 9

Click Here for Return to


PI Sheet Table of Contents
194
P R O D U C T I N F O R M A T I O N

Compressor Lubricants
C I T G O C O M P R E S S O R O I L 7 5 8 5
Date 06/15

DESCRIPTION: CITGO Compressor Oil 7585 is a compressor lubricant specifically designed to provide excellent
protection against oxidation and corrosion for reciprocating compressors operating in sour, wet, high
pressure natural gas service.

QUALITIES: CITGO Compressor Oil 7585 is formulated to a high Viscosity Index to provide good low temperature
starting and high temperature film strength.
CITGO Compressor Oil 7585, contains a special additive system to reduce lubricant displacement
by water or liquid hydrocarbons, resist the corrosive effects of hydrogen sulfide and other sour gas
components, and fight deposit formation to ensure compressor cleanliness.
CITGO Compressor Oil 7585 can tolerate a wide variety of natural gas quality.

APPLICATIONS: CITGO Compressor Oil 7585 satisfies the lubricant requirements of single and multi-stage reciprocating
compressors in raw, scrubbed or processed natural gas service, and excels where once through
lubrication is needed in wet acidic gas service.
CITGO Compressor Oil 7585 is widely used for compressing production natural gas, high pressure
carbon dioxide, hydrogen sulfide, refinery tail gas, and wellhead gas, where the gas stream may be wet
and dirty.

TYPICAL PROPERTIES:

CITGO COMPRESSOR OIL 7585

Material Code 637141001

Gravity, ASTM D 4052, API 28.8


Flash Point, ASTM D 92, F (C) 410 (210)
Viscosity, ASTM D 445, cSt at 40C 267
cSt at 100C 24.0
Viscosity Index, ASTM D 2270 120
Pour Point, ASTM D 97, F (C) 14 (-10)

CITGO is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

CITGO PG
CIT e tOr oPl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10099C 1 0 0 9 9

Click Here for Return to


PI Sheet Table of Contents
195
P R O D U C T I N F O R M A T I O N
Compressor Lubricants

C I T G O C O M P R E S S O R G A R D
D E
Date 06/15

DESCRIPTION: CITGO CompressorGard DE lubricants are formulated from premium diester base stocks and
incorporate the latest developments in additive technology. They are designed to satisfy the
lubrication requirements for most air compressors in service today.

BENEFITS: CITGO CompressorGard DE lubricants are engineered to provide superior oxidation and thermal
characteristics which, when compared with mineral oils, offer:
Better low temperature fluidity for cold climate operations.
Better thermal conductivity reduces lubricant operating temperatures, extending fluid service.
Less wear due to lower friction coefficient.
Greater resistance to thermal or mechanical stress creates fewer deposits, reducing maintenance.
Reduced oil carryover and reduced valve deposits due to low vapor pressure and increased solvency.

APPLICATIONS: CITGO CompressorGard DE 32 and 68 are recommended for use in oil flooded rotary vane and
screw type air compressors where these viscosity fluids are needed. The high thermal stability
and oxidation stability minimize the formation of deposits, sludge and lacquers, especially in the
heat exchangers.
CITGO CompressorGard DE 100, 125 and 150 are especially designed for both the crankcase and
cylinder lubrication of reciprocating compressors. The combination of low volatility and excellent
thermal and oxidation stability provide for significantly cleaner discharge valves. Cleaner valves mean
reduced maintenance and reduced risk of compressor fires or explosions caused by these deposits.

MATERIALS COMPATIBILITY

Materials Recommended Not Recommended


Seals Fluorocarbon, Fluorosilicone, Butadiene, Butyl, Ethyl Propylene,
Nitrile Buna N (>30%), Isoprene, Natural Rubber, Neoprene,
Polysulfide, Teflon, Viton Nitrile Buna N (< 30%), Polyacrylate,
Polyacrylic, SBR Rubber
Paints Epoxy, Oil Resistant Alkyd Acrylic, PVC
Plastics Celcon, Delrin, Fluorocarbon, Polystyrene, PVC, ABS,
nylon polycarbonate
Viton is a registered trademark of DuPont Dow Elastomers.

(Continued)

(Continued)

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10095C 1 0 0 9 5

Click Here for Return to


PI Sheet Table of Contents
196
P R O D U C T I N F O R M A T I O N

Compressor Lubricants
C I T G O C O M P R E S S O R G A R D
D E
(Continued)
D ate 06/15 - (Continued)

TYPICAL PROPERTIES:

CITGO COMPRESSORGARD DE

ISO Viscosity Grade 32 68 100 125 150

Material Code 632523001 632525001 632526001 632527001 632528001

Specific Gravity 0.9557 0.9642 0.9592 0.9617 0.949


Gravity, ASTM D 4052, API 16.6 15.2 16.0 15.5 17.5
Density, lb/gal 7.96 8.03 7.99 8.02 7.93
Viscosity, cSt at 40 C 33.4 62.0 94.7 120.3 149.5
Viscosity, cSt at 100 C 5.27 7.00 9.40 14.32 12.3
Viscosity Index 83 55 67 119 61
Flash Point, ASTM D 92, F (C) 493 (256) 522 (272) 554 (290) 532 (278) 511 (266)
Fire Point, ASTM D 92, F (C) 543 (284) 561 (294) 572 (300) 554 (290) 568 (298)
Pour Point, ASTM D 97, F (C) <-69 (<-56) -38 (-39) -33 (-36) -38 (-39) -33 (-36)
Color, ASTM D 1500 L1.0 L1.0 L1.0 L1.0 L1.0
Carbon Residue, ASTM D 524, % 0.11 0.09 0.09 0.09 0.09
Four Ball Wear, ASTM D 4172
mm at 20 kg 0.66 0.60 0.42 0.59
mm at 40 kg 0.68 0.68 0.68 0.66 0.44

CITGO and CompressorGard are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the
property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10095C 1 0 0 9 5

Click Here for Return to


PI Sheet Table of Contents
197
P R O D U C T I N F O R M A T I O N
Compressor Lubricants

C I T G O C O M P R E S S O R G A R D
G E
Date 06/15

DESCRIPTION: CITGO CompressorGard GE products are formulated with a special combination of polyglycol and
Alkylated Hydrocarbon to address thermal degradation and deposit formation commonly associated
with conventional rotary screw compressor coolants.

BENEFITS: The unique synthetic blend combination found in CITGO CompressorGard GE products has been
proven to offer superior performance in the areas of oxidation resistance and deposit control.
CompressorGard GE products further eliminate the varnish, sludge and frequent lubricant changes
commonly associated with hydrocarbon-type compressor oils.

APPLICATIONS: CITGO CompressorGard GE 32 has been formulated specifically to address the needs of Sullair
Rotary Screw Compressors.
CITGO CompressorGard GE 46 has been formulated specifically to address the needs of Ingersoll-
Rand Rotary Screw Compressors.

TYPICAL PROPERTIES:

CITGO COMPRESSORGARD GE

Grade 32 46

Material Code 632580001 632591001

Gravity, ASTM D 4052, API 14.3 14.0


Density, lbs/gal 8.08 8.11
Viscosity, ASTM D 445, cSt at 40C 37.6 55.0
Viscosity, ASTM D 445, cSt at 100C 7.10 9.88
Viscosity Index, ASTM D 2270 153 168
Color Blue Green Blue Green
Flash Point, ASTM D 92, F (C), COC 457 (236) 457 (236)
Pour Point, ASTM D 97, F (C) -60 (-51) -60 (-51)
Autoignition Temperature, ASTM D 2155, F (C) 730 (388) 750 (399)
Rust Prevention, ASTM D 665 A/B Pass Pass
Foam Test, Sequence I. II. III Pass Pass

CITGO and CompressorGard are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10098C 1 0 0 9 8

Click Here for Return to


PI Sheet Table of Contents
198
P R O D U C T I N F O R M A T I O N

Compressor Lubricants
C I T G O C O M P R E S S O R G A R D
H - S E R I E S
Date 06/15

DESCRIPTION: CITGO CompressorGard H-Series fluids are formulated with the highest quality synthetic base
stocks to address thermal degradation and deposit formation commonly observed in reciprocating
compressors operating in natural gas compression service.

BENEFITS: CITGO CompressorGard H-Series products provide:


Protection against wear, thermal and oxidative deposits.
Excellent rust and corrosion protection in the presence of hydrogen sulfide and offer excellent low
temperature service.

APPLICATIONS: CITGO CompressorGard H-Series products are designed for use in reciprocating compressors in
hydrogen and natural gas service.
CITGO CompressorGard H-Series products are non-catalyst poisoning and can be used in the
compression of gas streams that come in contact with catalyst beds.

TYPICAL PROPERTIES:

CITGO COMPRESSORGARD H-SERIES

ISO Viscosity Grade 100 220

Material Code 632566001 632568001

Gravity, API 37.15 35.55


Density lbs/gal 6.99 7.05
Viscosity, ASTM D 445
cSt at 40C 105 225
cSt at 100C 14.45 25.6
Viscosity Index 141 144
Flash Point, ASTM D 92, F (C) 518 (270) 558 (292)
Pour Point, ASTM D 97, F (C) -54 (-48) -54 (-48)
Rust Prevention, ASTM D 665 A Pass Pass
Foam, Sequence I 10/0 10/0
Sequence II 15/0 15/0
Sequence III 0/0 0/0
Water Separation, ASTM D 1401, at 180F (82C) 40/40/0 (5) 40/40/0 (10)

CITGO and CompressorGard are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10146C 1 0 1 4 6

Click Here for Return to


PI Sheet Table of Contents
199
P R O D U C T I N F O R M A T I O N
Compressor Lubricants

C I T G O C O M P R E S S O R G A R D
I P G
Date 06/15

DESCRIPTION: CITGO CompressorGard IPG 100 is a high-quality polyether polyol synthetic compressor lubricant
engineered for the compression of propane. CITGO CompressorGard IPG 100 offers good water
separation characteristics, excellent wear protection and oxidation resistance.

BENEFITS: CITGO CompressorGard IPG 100 is miscible with propane in the low temperature areas of the
system like the expansion valve and evaporator for efficient cooling.
The naturally high viscosity index of CITGO CompressorGard IPG 100 when compared to mineral oils
provides enhanced lubrication through increased viscosity at high temperatures.

APPLICATIONS: CITGO CompressorGard IPG ISO 100 is recommended for use in rotary screw, vane and
reciprocating compressors in propane refrigeration service.

TYPICAL PROPERTIES:

CITGO COMPRESSORGARD IPG

ISO Viscosity Grade 100

Material Code 632546001

Gravity, ASTM D 4052, API 10.6


Density, lb/gal 8.29
Specific Gravity 0.99
Flash Point, ASTM D 92, F (C) 525 (274)
Viscosity, ASTM D 445, cSt at 40C 100
Viscosity, ASTM D 445, cSt at 100C 17.5
Viscosity Index, ASTM D 2270 192
Pour Point, ASTM D 97, F (C) -49 (-45)
Water Separation, ASTM D 1401
82C (180F) Pass
Foam Test , ASTM D 892, Sequence I, II, III Pass
Four Ball Wear, ASTM D 4172, mm Scar 0.49
Copper Corrosion, ASTM D 130 1A

CITGO and CompressorGard are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGO PG
CIT e tOr oPl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10097C 1 0 0 9 7

Click Here for Return to


PI Sheet Table of Contents
200
P R O D U C T I N F O R M A T I O N

Compressor Lubricants
C I T G O C O M P R E S S O R G A R D
P A G
Date 3/17

DESCRIPTION: CITGO CompressorGard PAG products are designed especially for high pressure reciprocating
compressors operating with natural gas, carbon dioxide, hydrogen, helium, nitrogen, ammonia and other
polar gasses.

QUALITIES: CITGO CompressorGard PAG products are resistant to hydrocarbon dilution and absorption of the
gas stream. As a result, condensed hydrocarbon liquids in the cylinder area do not wash the lubricant
from the cylinder walls. Other lubricants which absorb these liquids lose viscosity, which can result
in severe mechanical damage. The high viscosity index and low pour points allow usage over a wide
temperature range.

BENEFITS: Permits reduced maintenance costs and decreased downtime due to improved lubrication.
Minimizes problems downstream in separators, meters, filters, etc. due to lower lubricant consumption.
Allows easier handling and lower disposal costs.
Reduces absorption of lubricating oil into the gas at higher pressures.
Minimizes viscosity degradation when saturated with high pressure gas.
Provides excellent resistance to wash-off by liquid hydrocarbon gases.
Offers compatibility with well bore fluids and treating chemicals, therefore reducing incidence of well
impairment.

APPLICATIONS: CITGO CompressorGard PAG products are excellent for flooded rotary screw and vane compressors
used to compress natural gas, carbon dioxide and other gaseous hydrocarbons. CITGO CompressorGard
PAG products of appropriate grade viscosity are also suitable for use as a reciprocating compressor
cylinder lubricant when processing these and other gases requiring chemical resistance.

TYPICAL PROPERTIES:

CITGO COMPRESSORGARD PAG

ISO Viscosity Grade 80 150 220

Material Code 632542001 632348001 632595001

Gravity, API 4.6 3.7 3.5


Specific Gravity 1.04 1.05 1.05
Density, lb/gal. 60/60F 8.66 8.71 8.73
Viscosity, ASTM D 445, cSt at 40C 85 154.1 220
ASTM D 44cSt at 100C 16.8 29.3 41.05
Viscosity Index, ASTM D 2270 215 232 241
Flash Point, ASTM D 92, F (C) 550 (288) 547 (286) 554 (290)
Pour Point, ASTM D 97, F (C) -60 (-51) -49 (-45) -49 (-45)
Color, ASTM D 1500 L 0.5 L 0.5 L 0.5
Copper Strip Corrosion, ASTM D 130 1A 1A 1A
Rust Protection, ASTM D 665A Pass Pass Pass
Four Ball Wear, ASTM D 4172,
Mm @ 40KG 0.52 0.63 0.83
Foam Resistance, ASTM D 892
Sequence I, II, III Pass Pass Pass
Carbon Residue, mg 0.01 0.01 0.01
______
CITGO, and CompressorGard are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.
Values shown are typical values only and do not constitute a specification. The information contained herein is subject to
change without notice.

Teexxaass M
CITGO Petroleum Corporation 800/248-4684 Houston, T M aa nn uu ff aa cc tt uu rr ee dd ii nn U
U SS AA
C10093
C 10093

Click Here for Return to


PI Sheet Table of Contents
201
P R O D U C T I N F O R M A T I O N
Compressor Lubricants

C I T G O C O M P R E S S O R G A R D
P A O
Date 06/15

DESCRIPTION: CITGO CompressorGard PAO lubricants are formulated with high-quality polyalphaolefin (synthesized
hydrocarbon) base fluids and incorporate technologically advanced additives to provide effective and
efficient compressor performance. Available in ISO grades 32, 46, 68, 100 and 150.

BENEFITS: Reduced danger of compressor fire and explosions resulting from deposit formation
Outstanding oxidation and thermal stability
Exceptionally low pour point
Low varnish-forming tendencies
Wide operating temperature range
High viscosity index
Excellent antiwear properties
Extended service life
Lower maintenance costs
Excellent rust protection
Fully compatible with elastomers, paints, seals and petroleum oil
Low toxicity
Excellent demulsibility

APPLICATIONS: CITGO CompressorGard PAO lubricants are designed for use with the following types of
compressors: Rotary Vane, Rotary Screw and Centrifugal.
Rotary Compressors Rotary vane and rotary screw compressors are lubricated by injecting the
oil directly into the airstream where it is in intimate contact with high-temperature air. The excellent
thermal and oxidation properties of CITGO CompressorGard PAO lubricants make them ideal
to guard against sludge and varnish deposit formation and accumulation. They give outstanding
performance in maintaining a cleaner compressor interior, which means reduced component wear
and, thus, increased compressor efficiency and safety.
Centrifugal Compressors Centrifugal (Dynamic) compressors are often mated with integral
gear sets, requiring a lubricant with good load carrying ability and low foaming tendencies. These
compressors are often remotely located. CITGO CompressorGard PAO lubricants contain a carefully
selected and proven additive package and low vapor forming tendencies to assure that excellent
performance can be achieved over an extended drain interval and extended compressor life when
compared to petroleum oil.

(Continued)

C I T GCOI TPGeOt r oPl ee tur m


o l eCuomr p C
o roar tpi oo rna t i o8n0 0 / 28 40 80 -/ 42 64 88 4- 4 6 8H4o u s H
t oonu,s tToenx,a T
s ex a
Msa n uM
f aacdt eu r iend Ui n
S AU S A
C10094 C10094

Click Here for Return to


PI Sheet Table of Contents
202
P R O D U C T I N F O R M A T I O N

Compressor Lubricants
C I T G O C O M P R E S S O R G A R D
P A O
Date 06/15 - (Continued)

TYPICAL PROPERTIES:

CITGO COMPRESSORGARD PAO

ISO Grade 32 46 68 100 150

Material Code 632531001 632532001 632533001 632534001 632535001

API Gravity 36.6 35.8 36.4 35.8 34.8


Specific Gravity 0.842 0.847 0.843 0.847 0.851
Density, lb/gal, 60/60F 7.01 7.04 7.02 7.04 7.09
Viscosity, ASTM D 445,
cSt at 40C 30.22 43.38 66.33 98.35 153.98
cSt at 100C 5.77 7.48 10.26 14.10 20.22
Viscosity Index, ASTM D 2270 136 139 141 147 152
Flash Point, ASTM D 92, F (C) 522 (272) 504 (262) 543 (284) 550 (288) 550 (288)
Pour Point, ASTM D 97, F (C) -87 (-66) -71 (-57) -65 (-54) -65 (-54) -54 (-48)
Color, ASTM D 1500 L0.5 L0.5 L0.5 L0.5 L0.5
Copper Corrosion, ASTM D 130 1A 1A 1A 1A 1A
Rust Protection, ASTM D 665
DI Water Pass Pass Pass Pass Pass
Salt Water Pass Pass Pass Pass Pass
Four Ball Wear, ASTM D 4172,
mm at 40 Kg 0.41 0.42 0.30 0.32 0.33
Foam Resistance, ASTM D 892
Sequence I, II, III Pass Pass Pass Pass Pass
Water Separation, ASTM D 1401
at 130F (54C) 40/40/0 (5) 40/40/0 (10) 40/40/0 (10) - -
at 180F (82C) - - - 40/40/0 (10) 40/40/0 (15)
Carbon Residue, mg 0.02 0.02 0.04 0.03 0.04

CompressorGard PAO lubricants are not compatible with silicone or polyalkylene glycol compressor
lubricants. Consider CompressorGard PAG lubricants when compressing gases with condensed
hydrocarbon liquids.

CITGO and CompressorGard are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

C I T GCOI T P
G eOt r P
oel et u
r oml eCu omr pCoor rapt o
i or na t i o 8n 0 0 /820408/-244688-44 6 8 H
4 ou sHt oo un s, t T
one ,x aTse x aM
s an u
Mfaadc et u irne dU S
i nA U S A
C10094
C10094

Click Here for Return to


PI Sheet Table of Contents
203
P R O D U C T I N F O R M A T I O N
Compressor Lubricants

C I T G O C O M P R E S S O R G A R D
P S 6 8 F L U I D
Date 07/15

DESCRIPTION: CITGO CompressorGard PS 68 Fluid is a premium synthetic blend compressor lubricant formulated
with hydrotreated base stocks and a proprietary synthetic component to aid in controlling sludge and
deposit formation in compressor applications. CompressorGard PS 68 Fluid is designed specifically for
use in compressor applications, but can be used in multi-purpose applications.

BENEFITS: Resists fluid breakdown caused by high operating temperatures.


Improves condensate separator efficiency due to excellent demulsibility.
Reduces fluid carryover and make-up oil costs due to low-volatility, hydrotreated mineral oils and
synthetic base stocks.
Reduces and controls deposits with high performance, ashless additives.
Improves equipment reliability by eliminating harmful varnish, sludge and carbon deposits on rotors
and separators.

APPLICATIONS: CITGO CompressorGard PS 68 Fluid is designed for use in: rotary vane, rotary screw, and centrifugal
compressors. It can also be used in hydraulic applications where anti-wear hydraulic oils are called for
and as a bearing lubricant.

TYPICAL PROPERTIES:

CITGO COMPRESSORGARD PS FLUIDS

ISO Viscosity Grade 68

Material Code 632482001

Specific Gravity, 60/60F 0.884


Density, lb/gal. 7.37
Viscosity, ASTM D 445
cSt at 40C 65.18
cSt at 100C 8.38
Viscosity Index, ASTM D 2270 97
Flash Point, ASTM D 92, C (F) 260 (500)
Pour Pont, ASTM D 97, C (F) -36 (-33)
Color, ASTM D 1500 0.5
Water Separation, ASTM D 1401, 130F (54C) 40/40/0 (5)
Four Ball Wear, ASTM D 4172, mm at 40 kg. 0.48
Copper Strip Corrosion, ASTM D 130 1A
Rust Protection, ASTM D 665
DI Water, Proc. A Pass
Sea Water, Proc. B Pass
Foam, ASTM D 892, Sequence I, II, III, Pass

CITGO and CompressorGard are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGO CIPTGe tOr o P


l eeut m
r o lCe ou rmp oCr o
a rt ipoonr a t i8o0n0 / 2 84 08 0- 4/ 26 48 84 - 4 6H8 o4 u s t H
oonu
, sTt eo xn a, sT e xMa as n u fM
aac tduer ei n
d U
i nS U
ASA
C10161C 1 0 1 6 1

Click Here for Return to


PI Sheet Table of Contents
204
P R O D U C T I N F O R M A T I O N

Compressor Lubricants
C I T G O C O M P R E S S O R G A R D
S S
Date 06/15

DESCRIPTION: CITGO CompressorGard SS fluids are semi-synthetic lubricants designed for rotary screw and
reciprocating compressors in natural gas service. The thermal and oxidation stability of these products
are superior to conventional petroleum products. CITGO CompressorGard SS fluids contain a
balanced additive system to inhibit rust and corrosion, reduce bearing wear, minimize foaming and
inhibit the corrosive effects of hydrogen sulfide.

QUALITIES: When compared with conventional petroleum products, CITGO CompressorGard SS fluids offer:
Low vapor pressure to reduce oil carryover to the compressed gas stream.
Oxidation and thermal stability to reduce valve deposit formation that in turn lowers the risk of fires
and reduces valve maintenance.
Wide operating temperature range attributable to high viscosity index and low pour point.
Inhibition against hydrogen sulfide corrosion for longer component life.
CITGO CompressorGard SS fluids are compatible with the same system elastomers and seals as
used with petroleum products.

APPLICATIONS: CITGO CompressorGard SS fluids are recommended for use in rotary screw, vane and reciprocating
compressors.

TYPICAL PROPERTIES:

CITGO COMPRESSORGARD SS

ISO Viscosity Grade 100 150

Material Code 632554001 632555001

API Gravity, API ASTM D 287 29.41 27.6


Density, lb/gal 7.33 7.36
Specific Gravity, 60/60F 0.879 0.884
Flash Point, ASTM D 92, F (C) 504 (262) 504 (262)
Viscosity, ASTM D 445, cSt at 40C 99 154
Viscosity, ASTM D 445, cSt at 100C 15.1 20.1
Viscosity Index, ASTM D 2270 161 151
Pour Point, ASTM D 97, F (C) -38 (-39) -36 (-38)
Copper Corrosion, ASTM D 130 1A 1A
Four Ball Wear, 1200 rpm
ASTM D 4172, mm Scar at 40kg 0.48 0.45
Rust Test, ASTM D 665 Pass Pass
Foam Test, ASTM D 892
Sequence I 0/0 0/0
Sequence II 10/0 10/0
Sequence III 0/0 0/0

CITGO and Compressorgard are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10096C 1 0 0 9 6

Click Here for Return to


PI Sheet Table of Contents
205
P R O D U C T I N F O R M A T I O N
Compressor Lubricants

C I T G O C O M P R E S S O R G A R D
X A 2 0 0
Date 08/15

DESCRIPTION: CITGO CompressorGard XA 200 is specifically designed for use in reciprocating compressors
subjected to sour, wet, high pressure gases found in refineries, gas compression stations and
fertilizer plants.

BENEFITS: CITGO CompressorGard XA 200 offers:


State of the art premium rust and corrosion inhibitor; does not contain Barium
Outstanding demulsification properties
Excellent thermal and hydrolytic stability
Resistance to gelling when contaminated with water
Quick release of entrained gases
Resistance to corrosive attacks by hydrogen sulfide, wet carbon dioxide and other
sour gas components

APPLICATIONS: CITGO CompressorGard XA 200 is an excellent lubricant for use in reciprocating compressors
subjected to high-pressure Carbon Dioxide and Hydrogen Sulfide service, in Urea fertilizer
compression syn-gas compression, refinery tail-gas compression, wellhead gas compression and
high-pressure Sulfur Dioxide applications.

TYPICAL PROPERTIES:

CITGO COMPRESSORGARD XA 200

Material Code 632558001

API Gravity, ASTM D 4052 31.8


Density, lb/gal 7.26
Flash Point, ASTM D 92 (COC) F (C) 468 (242)
Viscosity, ASTM D 445, cSt at 40C 180
Viscosity, ASTM D 445, cSt at 100C 22
Viscosity Index, ASTM D 2270 147
Pour Point, ASTM D 97, F (C) -17 (-27)
Color, ASTM D 1500 0.5
Copper Corrosion, ASTM D 130, 3h at 100C 1A
Rust Test, ASTM D 665 A, B Pass
Foam Test, ASTM D 892, Sequence I, II, III Pass

CITGO and CompressorGard are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
84o us tHoonu, sTt oe nx ,a sT e x M
a sa n u M
f aacdt u
ere
i nd Ui nS AU S A
C10043C 1 0 0 4 3

Click Here for Return to


PI Sheet Table of Contents
206
P R O D U C T I N F O R M A T I O N

Compressor Lubricants
C I T G O G A S C O M
R O I L
Date 06/15

DESCRIPTION: CITGO Gascom R Oil is formulated to satisfy the lubrication requirements of gas compressors used for
wet, scrubbed or processed gases.

QUALITIES: CITGO Gascom R Oil is formulated with high VI base stocks and special lubricity additives which
reduces lubricant displacement by water and/or liquid hydrocarbons.
CITGO Gascom R Oil can tolerate a wide variety of gas quality.

APPLICATIONS: CITGO Gascom R Oil satisfies the lubricant requirements of single or double-acting reciprocating
compressors in raw, scrubbed or processed natural gas service.
CITGO Gascom R Oil can also be used as a mild stamping and drawing lubricant where enhanced
lubricity is needed.

TYPICAL PROPERTIES:

CITGO GASCOM R OIL

ISO VIS Grade 220

Material Code 637142001

Specific Gravity, 60/60F 0.8838


Gravity, ASTM D 4052, API 28.6
Flash Point, ASTM D 92, F (C) 450 (232)
Viscosity, ASTM D 445, cSt at 40C 234
cSt at 100C 20.4
ASTM D 2161, SUS at 100F 1350
SUS at 210F 100
Viscosity Index, ASTM D 2270 100
Pour Point, ASTM D 97, F (C) 5 (-9)
Color, ASTM D 1500 4.0

CITGO and Gascom are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.

CITGO PG
CIT e tOr o Pl eeut rmo l C
eou rmp oCr oa rt pi oonr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt u
e r iend Ui nS AU S A
C10101C 1 0 1 0 1

Click Here for Return to


PI Sheet Table of Contents
207
P R O D U C T I N F O R M A T I O N
Compressor Lubricants

C I T G O P A C E M A K E R
S T - 3 2
Date 08/15

DESCRIPTION: CITGO Pacemaker ST-32 is a synthetic gas turbine lubricant formulated to meet the demands of high
output stationary industrial gas turbines. High quality synthetic base oils are blended with carefully
selected additives to impart antiwear, high temperature oxidation and corrosion inhibition, as well
as rust protection. CITGO Pacemaker ST-32 exhibits exceptional low temperature performance,
permitting superior fluidity during cold startups and cold weather operation. It is completely miscible
and is compatible with petroleum based lubricants and components.

QUALITIES: Exceptionally good low temperature fluidity provides reduced wear and lowered power consumption
during startup
High viscosity index provides excellent temperature/viscosity performance over a wide
temperature range
High load carrying and antiwear characteristics for longer component life than mineral oil products
Compatibility with petroleum based lubricants and system components such as seals, paints,
gaskets and hoses

APPLICATIONS: CITGO Pacemaker ST-32 meets the specifications of:


Fives Cincinnati P-38
DIN 51515 Part 1
DIN 51515 Part 2
British Standard BS 489
GEK 46506D
GEK 32568F
Alstom HTGD 90117
Solar ES 9-224W
Siemens TLV 901304
Siemens TLV 901305
Note: Not intended for aviation applications.
TYPICAL PROPERTIES:
CITGO PACEMAKER ST-32
ISO Viscosity Grade 32
Material Code 632515001
Specific Gravity, 60/60F 0.853
Density, lbs/gal 7.10
Viscosity, ASTM D 445, cSt at 040C 30.5
cSt at 100C 5.74
Viscosity Index, ASTM D 2270 132
Flash Point, ASTM D 92, F (C) 486 (252)
Pour Point, ASTM D 97, F (C) -71 (-57)
Copper Corrosion, ASTM D 130 1A
Rust Protection, ASTM D 665
DI Water, Proc. A Pass
Salt Water, Proc. B Pass
Foaming Tendency, Sequence I, II, III Pass
Neutralization Number 0.1
Four Ball Wear, ASTM D 4172, 40kg, mm 0.46

CITGO and Pacemaker are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or
trademarks are the property of their respective owners.

CIT
CITGO PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr at i 8o 0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10092C 1 0 0 9 2

Click Here for Return to


PI Sheet Table of Contents
208
P R O D U C T I N F O R M A T I O N

C I T G O P R O C O I L
O I L S
Date 06/15

DESCRIPTION: CITGO Procoil products are highly refined light color, very low sulfur, paraffinic process oils.

QUALITIES: CITGO Procoil products have:


Low volatility, low aromaticity and high flash points.
Very light color and excellent antioxidant response.
High viscosity index for relatively low rate of viscosity change with changes in temperature.

Process Oils
APPLICATIONS: CITGO Procoil products are recommended as carriers, diluent oils, processing aids or functional oils
in a wide range of formulations and chemical processes. CITGO Procoil products are used where
superior stability, high flash, low pour and low volatility characteristics are desired.

TYPICAL PROPERTIES:

CITGO PROCOIL OILS

910 915 935 950

Material Code 627910001 627915001 627935001 627950001

Gravity, ASTM D 4052, API 34.7 32.9 31.4 30.5


Specific Gravity 60/60F 0.852 0.861 0.870 0.873
Pounds Per Gallon 7.09 7.17 7.23 7.27
Flash Point, ASTM D 92, F (C) 400 (205) 415 (214) 440 (227) 510 (265)
Viscosity, ASTM D 2161, SUS at 100F 107 156 320 500
Viscosity, ASTM D 2161, SUS at 210F 40.1 43.9 54 64
Viscosity, ASTM D 445, cSt at 40C 20.4 30.2 62 108
Viscosity, ASTM D 445, cSt at 100C 4.15 5.25 8.4 12
Viscosity Index, ASTM D 2270 106 105 104 99
Aniline Point, ASTM D 611,F (C) 227 (108) 221 (105) 231 (111) 245 (118)
Ash, ASTM D 482
Carbon Residue, ASTM D 4530 0.01 0.01 0.02 0.03
Total Acid Number, ASTM D 664 0.05 0.05 0.05 0.05
Pour Point, ASTM D 97, F (C) 5 (-15) 5 (-15) 5 (-15) 10 (-12)
Color, ASTM D 1500 L0.5 L0.5 L0.5 0.5
Molecular Weight, ASTM D 2502 370 410 477 535
Sulfur, ASTM D 2622, wt% 0.002 0.002 0.002 0.002

CITGO and Procoil are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks
are the property of their respective owners.

CITGC
OI T
PGe tOr oPl ee ut rmo l C
euom
r p oCr oa rt pi oo nr a t i 8
o0n 0 / 284080- /4264884- 4 6 H
8 4o us tHoonu, s Tt oe nx ,a sT e x M
a sa n u M
f aacdt e
u r iend Ui nS AU S A
C10125C 1 0 1 2 5

Click Here for Return to


PI Sheet Table of Contents
209
W
WHH II C
CHH O
O II LL II S
S
RIGHT
RIGHT FOR
FOR YOU?
YOU?
References

API guide to certification marks, service symbols & categories (CJ-4 & prior) 2016 American Petroleum Institute, reprinted with permission

Return to
Table of Contents
210
The current and previous ILSAC standards and API Service Categories are listed here. Vehicle owners should refer to their owners manuals before
consulting these charts. Oils may have more than one performance level.
For automotive gasoline engines, the latest ILSAC standard or API Service Category includes the performance properties of each earlier category and
can be used to service older engines where earlier category oils were recommended.

ILSAC STANDARD FOR PASSENGER CAR ENGINE OILS


Name Status Service
GF-5 Current Introduced in October 2010, designed to provide improved high temperature deposit protection for pistons and
turbochargers, more stringent sludge control, improved fuel economy, enhanced emission control system compatibility,
seal compatibility, and protection of engines operating on ethanol-containing fuels up to E85.

GF-4 Obsolete Use GF-5 where GF-4 is recommended.

GF-3 Obsolete Use GF-5 where GF-3 is recommended.

GF-2 Obsolete Use GF-5 where GF-2 is recommended.

GF-1 Obsolete Use GF-5 where GF-1 is recommended.

GASOLINE ENGINES (Follow your vehicle manufacturers recommendations on oil performance levels)
Category Status Service
SN Current Introduced in October 2010, designed to provide improved high temperature deposit protection for pistons, more
stringent sludge control, and seal compatibility. API SN with Resource Conserving matches ILSAC GF-5 by combining
API SN performance with improved fuel economy, turbocharger protection, emission control system compatibility, and

References
protection of engines operating on ethanol-containing fuels up to E85.

SM Current For 2010 and older automotive engines.

SL Current For 2004 and older automotive engines.

SJ Current For 2001 and older automotive engines.

SH Obsolete OBSOLETE: For 1996 and older automotive engines.

SG Obsolete CAUTION: Not suitable for use in most gasoline-powered automotive engines built after 1993. May not provide
adequate protection against build-up of engine sludge, oxidation, or wear.

SF Obsolete CAUTION: Not suitable for use in most gasoline-powered automotive engines built after 1988. May not provide
adequate protection against build-up of engine sludge.

SE Obsolete CAUTION: Not suitable for use in most gasoline-powered automotive engines built after 1979.

SD Obsolete CAUTION: Not suitable for use in most gasoline-powered automotive engines built after 1971. Use in more modern
engines may cause unsatisfactory performance or equipment harm.

SC Obsolete CAUTION: Not suitable for use in most gasoline-powered automotive engines built after 1967. Use in more modern
engines may cause unsatisfactory performance or equipment harm.

SB Obsolete CAUTION: Not suitable for use in most gasoline-powered automotive engines built after 1951. Use in more
modern engines may cause unsatisfactory performance or equipment harm.

SA Obsolete CAUTION: Contains no additives. Not suitable for use in most gasoline-powered automotive engines built after 1930.
Use in modern engines may cause unsatisfactory performance or equipment harm.

Engine Oil Licensing and Certification System | 1220 L Street, NW | Washington, DC 20005-4070 | USA | Telephone: 202-682-8516 | Email: eolcs@api.org | www.api.org/eolcs
Copyright 2016 American Petroleum Institute, all rights reserved. API, the API logo, the Motor Oil Matters Seal, the API Service Symbol (Donut), the API Service Symbol with CI-4 PLUS logo, the API Certification Mark (Starburst),
the Mom Knows Best and the Motor Oil Matters phrases are either trademarks or registered trademarks of API in the United States and/or other countries. API Global Marketing & Creative: 2016-056 | 03.16 | PDF

Return to
Table of Contents
211
DIESEL ENGINES (Follow your vehicle manufacturers recommendations on oil performance levels)
Category Status Service

CJ-4 Current For high-speed four-stroke cycle diesel engines designed to meet 2010 model year on-highway and Tier 4 nonroad
exhaust emission standards as well as for previous model year diesel engines. These oils are formulated for use in all
applications with diesel fuels ranging in sulfur content up to 500 ppm (0.05% by weight). However, the use of these oils
with greater than 15 ppm (0.0015% by weight) sulfur fuel may impact exhaust aftertreatment system durability and/or
drain interval. CJ-4 oils are especially effective at sustaining emission control system durability where particulate filters
and other advanced aftertreatment systems are used. Optimum protection is provided for control of catalyst poisoning,
particulate filter blocking, engine wear, piston deposits, low- and high-temperature stability, soot handling properties,
oxidative thickening, foaming, and viscosity loss due to shear. API CJ-4 oils exceed the performance criteria of API CI-4
with CI-4 PLUS, CI-4, CH-4, CG-4 and CF-4 and can effectively lubricate engines calling for those API Service Categories.
When using CJ-4 oil with higher than 15 ppm sulfur fuel, consult the engine manufacturer for service interval.

CI-4 Current Introduced in 2002. For high-speed, four-stroke engines designed to meet 2004 exhaust emission standards implemented
in 2002. CI-4 oils are formulated to sustain engine durability where exhaust gas recirculation (EGR) is used and are
intended for use with diesel fuels ranging in sulfur content up to 0.5% weight. Can be used in place of CD, CE, CF-4,
CG-4, and CH-4 oils. Some CI-4 oils may also qualify for the CI-4 PLUS designation.

CH-4 Current Introduced in 1998. For high-speed, four-stroke engines designed to meet 1998 exhaust emission standards. CH-4 oils
are specifically compounded for use with diesel fuels ranging in sulfur content up to 0.5% weight. Can be used in place
of CD, CE, CF-4, and CG-4 oils.

CG-4 Obsolete OBSOLETE: Introduced in 1995. For severe duty, high-speed, four-stroke engines using fuel with less than 0.5% weight
sulfur. CG-4 oils are required for engines meeting 1994 emission standards. Can be used in place of CD, CE,
and CF-4 oils.

CF-4 Obsolete OBSOLETE: Introduced in 1990. For high-speed, four-stroke, naturally aspirated and turbocharged engines. Can be used
in place of CD and CE oils.
References

CF-2 Obsolete OBSOLETE: Introduced in 1994. For severe duty, two-stroke-cycle engines. Can be used in place of CD-II oils.

CF Obsolete OBSOLETE: Introduced in 1994. For off-road, indirect-injected and other diesel engines including those using fuel with
over 0.5% weight sulfur. Can be used in place of CD oils.

CE Obsolete CAUTION: Not suitable for use in most diesel-powered automotive engines built after 1994.

CD-II Obsolete CAUTION: Not suitable for use in most diesel-powered automotive engines built after 1994.

CD Obsolete CAUTION: Not suitable for use in most diesel-powered automotive engines built after 1994.

CC Obsolete CAUTION: Not suitable for use in most diesel-powered engines built after 1990.

CB Obsolete CAUTION: Not suitable for use in most diesel-powered engines built after 1961.

CA Obsolete CAUTION: Not suitable for use in most diesel-powered engines built after 1959.

SAE VISCOSITY GRADES: PASSENGER CAR MOTOR OIL


Multigrade oils such as SAE 5W-30 and 10W-30 are widely used because, under all but extremely hot or cold conditions, they are thin enough to flow
at low temperatures and thick enough to perform satisfactorily at high temperatures. Note that vehicle requirements may vary. Follow your vehicle
manufacturers recommendations on SAE oil viscosity grade.

If lowest expected outdoor temperature is Typical SAE viscosity grades for passenger cars

0C (32F) 0W-20, 0W-30, 5W-20, 5W-30, 10W-30, 10W-40, 20W-50

18C (0F) 0W-20, 0W-30, 5W-20, 5W-30, 10W-30, 10W-40

Below 18C (0F) 0W-20, 0W-30, 5W-20, 5W-30

Return to
Table of Contents
212
HDEO: Full Synthetic to Conventional

Category

Full Synthetic SynDurance JT-8 5W-40 Delvac 1 ESP Rotella T 6 Delo 400 XSP Elixon 5W-30 Triton ECT Premium Blue
Plus 5W-30 5W-40 5W-40 5W-30 Kendall SHP Extreme
5W-30 5W-40 5W-40 5W-40
Synthetic Blend CITGARD 700 JT-8 SHD 10W- Delvac Extreme Rotella T5 Delo 400 XLE Hypuron 10W- Guardol Premium Blue
10W-30 30 FE 10W-30 10W30 10W-30 30 15W-40 ECT Kendall 8100 ES
15W-40 15W-40 15W50 15W-40 10W40 15W-30 Super-D XA 10W-30
Premium CITGARD 600 Delvac 1300 Rotella T-4 Delo 400 SDE Tection Extra Phillip 66 Premium Blue
Conventional 15W-40 10W-30 10W-30 15W40 15W-40 Supreme 8100 ES
15W-40 15W-40 Firebird 15W-40

213
EC Kendall
Valvoline
Super-D- EC
Premium Blue
15W-40 10W-
15W-40
30
Conventional CITGARD HD Mobil HDO Rotella T3 URSA 15W-40 Phillip 66 EC Valvoline Motor
15W-40 15W-40 Rimula 15W-40 Fleet Supreme Oil All Fleet
10W-30 EC 15W-40 15W-40

All recommendations set forth herein are based solely upon information and materials available at the time of publication. CITGO Petroleum Corporation
makes no representations or warranties of any kind regarding the completeness or current accuracy of its competitors information set forth herein.
Competitor formulations, claims, and approvals are subject to change without notice. All trademarks other than CITGO, CITGARD, CompressorGard and
Pacemaker are registered trademarks of their owners, which are not afliated with CITGO.

Return to
Table of Contents
References
SAE J300 SAE VISCOSITY GRADES FOR ENGINE OILS
Low-Tempurature Low-Tempurature Low-Shear- Low-Shear- High-Shear-
SAE Viscosity Cranking (C) Pumping Rate Kinematic Rate Kinematic Rate Kinematic
Grade Viscosity(3) (mPas) Viscosity(4) (mPas) Viscosity(5) (mm2/s) Viscosity(5) (mm2/s) Viscosity(5) (mPas)
Max Max with No Yield at 100C Min at 100C Max at 100C Min
Stress
0W 6200 at -35 60 000 at -40 3.8
5W 6600 at -30 60 000 at -35 3.8
10W 7000 at -25 60 000 at -30 4.1
15W 7000 at -20 60 000 at -25 5.6
20W 9500 at -15 60 000 at -20 5.6
25W 13 000 at -10 60 000 at -15 9.3
8 4.0 <6.1 1.7
12 5.0 <7.1 2.0
16 6.1 <8.2 2.3
20 6.9 <9.3 2.6
30 9.3 <12.5 2.9
40 12.5 <16.3 3.5 (0W-40 and
10W-40 grades)
40 12.5 <16.3 3.7 (15W-40, 20W-
40 and 25W-40, 40
grades)
50 16.3 <21.9 3.7
60 21.9 <26.1 3.7
Notes 1 mPas = 1 cP; mm2/s = 1 cSt
1. All values, with the exception of the low-tempurature cranking viscosity, are critical specications as dened by ASTM D3244 (see text,
Section 7.)
2. ASTM D5293: Cranking viscosity The non-critical specication protocol in ASTDM D3244 shall be applied with a P value of 0.95.
References

3. ASTM D4684: Note that the presence of any yield stress detectable by this method constitutes a failure regardless of viscosity.
4. ASTM D445
5. ASTM D4683, ASTM D4741, ASTM D5481, or CEC L-36-90.

SAE J306 AUTOMOTIVE GEAR LUBRICANT VISCOSITY CLASSIFICATION


SAE Viscosity Grade s Maximum Temperature for a Kinematic Viscosity at 100C, Kinematic Viscosity at 100C,
Viscosity of 150 000 cP, C(1,2) cSt(3) Minimum(4) cSt(3) Maximum
70W -55(5) 4.1
75W -40 4.1
80W -26 7.0
85W -12 11.0
80 7.0 <11.0
85 11.0 <13.5
90 13.5 <18.5
110 18.5 <24.0
140 24.0 <32.5
190 32.5 <41.0
250 41.0
NOTE1cP = 1 mPas; 1 cSt = 1mm2/s
1. Using ASTM D 2983.
2. Additional low-temperature viscosity requirements may be appropriate for uids intended for use in light duty synchronized manual
transmissions. See text.
3. Using ASTM D 445.
4. Limit must also be met after testing in CEC L-45-A-99. Method C (20 hours.)
5. The precision of ATSM Method D2983 has not been established for determinations made at temperatures below -40C. This fact
should be taken into consideration in any producer-consumer relationship.
*SAE J2360 replaced MIL-PRF-2105E as a world-wide standard for Automotive Gear Lubricants for Commercial and Military use. The gear
lubricant shall meet the limits for classication described in SAE J306.

Return to
Table of Contents
214
CITGO Grease Characteristics Chart

Base Oil Type

Temperatures

Temperatures
NLGI Grade

Semisyn. or

Resistance
(Enhanced

Protection

Protection
Synthetic)

Saltwater
Carrying)
(Mineral,

EP/AW

Water
Load

Rust

Rust

High
Low
Jet Lubricant TM Semi-Fluid Min. +
Lithoplex CM Greases 1 Min. ++ + + + +
2 Min. ++ + + +
Lithoplex HM Greases 1 Min. ++ + + + +
2 Min. ++ + + +
Lithoplex MP Greases 0 Min. ++ + + + +
1 Min. ++ + + + +
2 Min. ++ + + + +
Lithoplex PL Greases 000 Min. ++ + + +
00 Min. ++ + + +
0 Min. ++ + + +
Lithoplex PM Grease 2 Min. ++ + + + +
Lithoplex Red MP
2 Min. ++ + + + +
Grease
Lithoplex RT Greases 1 Min. + + + + +
2 Min. + + + + +

References
Lithoplex ST Greases 1 Min. ++ + + + ++
2 Min. ++ + + ++
OverDrive HD Grease 2 Min. ++ ++ ++ +
Premium Lithium EP Semi-Fluid Min. + + +
Greases 0 Min. + + +
1 Min. + + +
2 Min. + +
Railroad Curve 0 Min. + +
Greases 1 Min. +
SUPERGARD Marine
2 Min. + + + +
Plus Grease
SynDurance Premium 00 Syn. ++ ++ ++ ++ ++
Synthetic 460 Greases 2 Syn. ++ ++ ++ ++ ++ ++
SynDurance Premium
Synthetic 460 #00 00 Syn. ++ ++ ++ ++ ++
Grease Red
SynDurance ST 1 Syn. ++ + + ++ ++
Synthetic Greases,
ISO 220 2 Syn. ++ + + ++ ++
SynDurance ST 1 Syn. ++ + + ++
Synthetic Greases,
ISO 460 2 Syn. ++ + + ++
UltraLife CSEP 5M
2 Min. ++ + + ++ +
Grease
+ Suitable ++ Recommended

Return to
Table of Contents
215
NLGI GREASE CLASSIFICATIONS
The following table shows the worked penetration values for the various NLGI grades of grease.

NLGI A STM Worked


Number Penetration at 77F 1 ( 25C 0.5)

000 445-475
00 400-430
0 355-385
1 310-340
2 265-295
3 220-250
4 175-205
5 130-160
6 85-115
References

ASTM D 4950 STANDARD CLASSIFICATION AND SPECIFICATIONS


FOR AUTOMOTIVE SERVICE GREASES

Service Category L Chassis Grease


LB Chassis and universal joints subject to water contamination and heavy loads. Usable temperature -40F to 248F
with relubrication intervals greater than 2000 miles.

Service Category G Wheel Bearing Grease


GC Lubricate wheel bearings over a wide temperature range. Temperatures from -40F with frequent excursions to
320F and occasional to 392F.

AUTOMOTIVE AUTOMOTIVE
WHEEL BEARING & CHASSIS CHASSIS
LUBRICANT LUBRICANT

GC-LB LB

Return to
Table of Contents
216
GREASE THICKENER COMPATIBILITY CHART

ex xy y
pl e o e x a te e r ox
at y dr pl at ex
General Guide - om r f on r yd pl
C ea -H om ul ea -H om ap
Exceptions Are Possible St 12 C S St 12 C So
um m m m m m m m rea m
in iu iu iu iu iu iu iu iu
um c c c c y l yu d
l al al al al la ith ith ith
A C C C C C L L L Po So
Aluminum Complex C I B I I I I I I I* I
Calcium Stearate I C C I B I C B C I* I
Calcium 12-Hydroxy B C C B C I C C C I* I
Calcium Complex I I B C I I I I B C I
Calcium Sulfonate I B C I C I I B B I I

217
Clay I I I I I C I I I I I
Lithium Stearate I C C I I I C C C I* I
Lithium 12-Hydroxy I B C I B I C C C I* I
Lithium Complex I C C B B I C C C I* I
Polyurea I* I* I* C I I I* I* I* C I
Sodium Soap I I I I I I I I I I C

C - Compatible
B - Borderline
I - Incompatible
I* - Dependent Upon Type

Return to
Table of Contents
References
C I T G O Te c h n i c a l B u l l e t i n
Guide to Synthetic Industrial Lubricants

The term synthetic lubricant can apply to a wide range of non-petroleum derived
materials used as lubricant base stocks. The most common are synthetic hydrocarbons,
the polyalphaolens, or PAOs. These oils are very similar chemically to petroleum base
oils (mineral oils), but because they are synthesized from specic starting materials,
they are typically very uniform in molecular size and shape and do not contain the
impurities often found in mineral oils, including wax molecules. PAOs are better at low
temperature due to the absence of wax (low pour point) and better at high temperature
due to superior thermal and oxidative stability. They also have higher viscosity indexes
than mineral oils, making them applicable over a wider range of temperatures. Because
PAOs are so commonly used in lubricant formulations, the API gave them their own
base oil group API Group IV.
References

All other synthetic lubricant base stocks fall into another API base oil group Group V.
Those materials include various types of esters, polyalkylene glycols (PAGs), alkylated
aromatics, etc. Each type of synthetic uid has advantages and disadvantages. One of
the biggest challenges is compatibility. Compatibility not only between the various uid
types, but also compatibility with seals and other elastomeric or plastic components,
compatibility with paints and coatings, and even sometimes compatibility with the
metallic parts being lubricated. In general, mineral oils, PAOs, and most esters are
miscible and compatible. However, most PAGs are not compatible with mineral oils or
PAOs, and mixing can have disastrous results. Esters can be very aggressive towards
elastomers and plastics as well as paints and coatings. The use of an ester based
lubricant may require that the seals in the equipment be changed to a more resistant
elastomer. PAGs can also be aggressive towards seals and paints, and special
elastomers may be needed.

The use of synthetic lubricants is often done to extend the oil change interval. If the oil
change interval is based on oil thermal or oxidative degradation of the oil, then the use
of a synthetic lubricant is likely justied, and will lower overall operating cost. However,
if the oil change interval is based on contamination of the lubricant with water, wear
metals, environmental contaminants, etc., then using a synthetic lubricant will likely not
extend the service interval. In fact, contamination of certain types of esters with water
can result in hydrolysis, the breakdown of the ester into the organic acid and alcohol
Return to
Table of Contents
218
components from which it was made. That breakdown can result in an increase in acid
number, component corrosion, viscosity loss, and other negative impacts.

Selecting a synthetic lubricant can be a daunting task. Many factors must be considered
when selecting the appropriate type of synthetic uid for a specic application. As
stated above, PAO based products are the most common synthetic lubricants. Many
PAO based lubricants also contain some type of ester uid to improve the solubility of
additives in the nished lubricant. These PAO/ester products nd service in a wide
range of applications, ranging from industrial gear oils to compressor uids. Ester based
synthetic uids are used in some air compressor uids where the discharge temperature
is high and the solvency of the ester uid helps to reduce deposits and keep critical
surfaces clean. PAG uids are often used in compressor uids for natural gas or other
hydrocarbon gases. PAG uids are more resistant to dilution by the hydrocarbon gases,
and tend to maintain viscosity better under operating conditions.

Factors to take into consideration when selecting a synthetic lubricant include:

Viscosity grade and viscosity index Most synthetic lubricants have a higher
viscosity index compared to mineral oil based products. It may be possible to use a
lower viscosity grade synthetic that maintains viscosity better at higher temperatures.

References
Thermal and oxidative stability If the lubricant is to be used at high temperature, a
product with excellent thermal and oxidative stability should be selected.

Low temperature properties If the synthetic lubricant is being considered for low
temperature applications, the pour point of the product must be considered.

Flammability Some synthetic lubricants offer reduced ammability, due to higher ash
and re points compared to mineral oils of similar viscosity grade.

Lower tendency to form deposits Due to their superior solvency, ester based uids
tend to remove existing deposits and reduce the formation of new deposits. PAG
based uids are also very resistant to the formation of deposits. PAO based uids can
actually have a higher deposit formation tendency due to their inherently poorer solvency
compared to many other types of lubricants.

Material compatibility Compatibility with elastomers and plastics, paints and coatings,
and the metals being lubricated must be considered when selecting a synthetic lubricant.

Adverse reactions Reactions such as hydrolysis of ester based uids must be


considered when selecting a synthetic lubricant.

Miscibility Some synthetic uids are not miscible with mineral oils or other synthetics,
making a change more difcult. A proper change-over procedure must be followed in
those cases.
Return to
Table of Contents
219
Cost The cost of the synthetic lubricant must be balanced against the potential for a
longer oil change interval or improved operating conditions of the equipment. Synthetic
lubricants are often well worth the additional initial cost.
References

Return to
Table of Contents
220
Compatibility of Common Elastomers and Plastics with CITGO Products
Synthetic Polyalkylene
Elastomer/Plastic Abbreviation Trade Names Mineral Oil Synthetic Ester Water/Glycol
Hydrocarbon Glycol
Example Products HyDurance AW, CITGEAR Synthetic CompressorGard CompressorGard FR WG-40XD,
Pacemaker T, EP, DE PAG, Glycol FR-5046HP
EP Compound CITGEAR Synthetic CITGEAR Synthetic
HT, PAG
CompressorGard
PAO
Polyacrylate ACM HyTemp Very Good
Ethylene-Acrylic AEM Vamac Good Good Good
Ethylene-Propylene-Diene EPM, EPDM Duttral, Nordel, Poor Poor Poor Excellent to Good Recommended
Monomer Vistalon
Fluoroelastomers FKM, FPM Viton, Fluorel Very Good Very Good Very Good Excellent to Good Suitable
Nitrile (Acrylonitrile-Butadiene) NBR, XNBR, HNBR NBR, Purbunan, Good Good Poor to Good Fair Suitable
Buna-N,
Chemigum, Hycar,
Paracril, Nipol,
Krynac, Europrene
Peruoroelastomers FFKM Kalrez, Parauor Very Good Very Good
Polychloroprene CR Neoprene Fair Fair to Good Poor Good Suitable
Silicones MQ, VMQ, PMQ, VMQ Poor to Good Poor to Good Poor to Fair Good to Excellent
FMQ

221
Styrene-Butadiene SBR SBR, Buna-S Poor Poor to Good Poor Poor Suitable
Polyester Good Good Poor to Fair
Polytetrauoroethylene PTFE Teon Very Good Very Good Very Good Suitable
Polyamide PA Nylon, Zytel Poor to Good Poor to Good Poor
Polycarbonate PC Good
Natural Rubber NR Poor to Fair Poor to Fair Poor Suitable
Polyethylene PE (LDPE, HDPE) Good Good Good
Polypropylene PP Good to Poor
Butyl Rubber IIR Very Poor to Poor Very Poor to Poor Poor to Fair
Polyvinyl Chloride PVC PVC Poor to Good Poor to Good Poor
Chlorosulfonated Polyethylene CSPE, CSM Hypalon Fair
Polyether Ester TPC-ET Hytrel Good
Polyurethane PU Good to Fair
Polyoxymethylene, Polyacetal, POM Delrin, Kepital, Excellent - Good
acetal resin, polytrioxane, Celcon, Hostaform
polyformaldehyde, and and Ultraform
paraformaldehyde
Fluorosilicone FSI Good Excellent

Return to
Ethylene-Propylene Rubber EPR Poor Poor Good

Table of Contents
Fluorovinyl Methyl Silioxane FVMQ Fluorosilicone Good to Excellent

References
References

Compressor OEM Fluid Cross-reference


OEM Product Name CITGO Product Name Mat. Code Competitive Product Co
Atlas Copco Atlas Copco HD Roto Fluid CompressorGard PAO 46 632532001 Mineral Special Processed Oil, ISO 46
Atlas Copco HD Roto Fluid Plus CompressorGard PAO 46 632532001 Group III, ISO 46
Atlas Copco Paroil M CompressorGard PAO 46 632532001 Mineral Oil, anti-wear, ISO 46
Atlas Copco Paroil S 46 CompressorGard PAO 46 632532001 PAO, ISO 46
Atlas Copco Paroil S 68 CompressorGard PAO 68 632533001 PAO, ISO 68
Atlas Copco Roto-H Plus CompressorGard PAO 32 632531001 Mineral oil, ISO 32
Atlas Copco Roto-Inject CompressorGard PAO 46 632532001 Ashless, AW mineral oil, ISO 46
Atlas Copco Roto Xtend Duty Fluid CompressorGard PAO 46 632532001 PAO, ISO 46
Atlas Copco Roto Xtreme Duty No Product Polyol Ester, ISO 46
Fluid
Champion RotorLub 8000 CompressorGard PAO 46 632532001 PAO, ISO 46
RotorLub 4000FG Clarion CompressorGard 46 632541009 PAO, ISO 46, Food Grade
RotorLub 4000 CompressorGard PAO 46 632532001 Mineral Oil, ISO 46
Compair/Kellogg CompAir CN 300 No Product Naphthenic mineral oil, ISO 100
CompAir CS 100 CompressorGard DE 32 632523001 Diester, ISO 32

222
CompAir CS 200 CompressorGard DE 68 632525001 Diester, ISO 68
CompAir CS 300 CompressorGard DE 100 632526001 Diester, ISO 100
CompAir CS 400 CompressorGard DE 150 632528001 Diester, ISO 150
CompAir Hydrovane 2000 CompressorGard DE 100 632526001 Rotary compressor mineral oil, ISO 100; [Kellogg-
American (A CompAir Co.) recommends an ISO 100
diester for Hydrovane Rotary Vane 3 HP to 50 HP
comp. - check if mineral oil was previously used;
drain and ushing recommended]
Compair/LeROI CompAir LeRoi CompLube 10 CompressorGard PAO 46 632532001 PAO/Polyol ester mixture, ISO 46
CompAir LeRoi RVL 5 CompressorGard PAO 100 PAO/ester, ISO 100
CompAir LeRoi SSL-46 Plus CompressorGard PAO 46 632532001 PAO, ISO 46
CompAir LeRoi SSL-50 CompressorGard PAO 46 632532001 Semi-synthetic; PAO Mineral Oil blend, ISO 46

All recommendations set forth herein are based solely upon information and materials available at the time of publication. CITGO Petroleum Corporation
makes no representations or warranties of any kind regarding the completeness or current accuracy of its competitors information set forth herein.
Competitor formulations, claims, and approvals are subject to change without notice. All trademarks other than CITGO, CITGARD, CompressorGard,
Pacemaker, HyDurance and Clarion are registered trademarks of their owners, which are not afliated with CITGO.

Return to
Table of Contents
Compressor OEM Fluid Cross-reference - (Contd.)
OEM Product Name CITGO Product Name Mat. Code Competitive Product Co
Gardner Denver Gardner Denver Aeon 500 CompressorGard PAO 100 632534001 Mineral oil, ISO 100 - for reciprocating compressors
Gardner Denver Aeon 800 CompressorGard PAO 46 632532001 R&O, Mineral oil, ISO 46 - for rotary screw
compressors
Gardner Denver Aeon 2000 CompressorGard PAO 46 632532001 R&O Mineral oil, ISO 46
Gardner Denver Aeon 4000 CompressorGard PAO 46 632532001 Mineral/synthetic blend, ISO 46
Gardner Denver Aeon 5000 CompressorGard DE 68 632525001 Diester, ISO 68 - for reciprocating compressors
Gardner Denver Aeon 6000 FG Clarion CompressorGard 46 632541009 USDA H1, FDA 21CFR 178.3570, PAO, ISO 46
Gardner Denver Aeon 9000 SP CompressorGard PAO 46 632532001 PAO, ISO 46
Ingersoll-Rand Ingersoll-Rand All Season Select CompressorGard DE 100 632526001 Diester, ISO 100
Ingersoll-Rand OCV-Zero Fluid No Product ISO VG 15, diester uid
Ingersoll-Rand Original SSR CompressorGard DE 68 632525001 Diester, ISO 68, discontinued product
Coolant
Ingersoll-Rand Pro-Tec CompressorGard PAO 46 632532001
(stationary compressor)
Ingersoll-Rand Pro-Tec CITGARD 600 10W (portable 622610001

223
compressor)
Ingersoll-Rand Rotalube 1000 CompressorGard PAO 46 632532001 Mineral oil, ISO 46
Ingersoll-Rand SL-200 HyDurance AW NZ 46 633616001 For Oil-Free Sierra Compressors, Mineral oil, SAE
20, ISO 46, Ashless Hydraulic
Ingersoll-Rand SSR Ultra Coolant CompressorGard GE 46 632591001 Polyalkylene glycol/ester, 56.2 cSt at 40C
Ingersoll-Rand SSR Ultra Plus CompressorGard GE 32 632580001 Polyolester, ISO 32
Coolant
Ingersoll-Rand T-30 Select CompressorGard DE 150 632528001 Diester, ISO 150
Ingersoll-Rand Techtrol Gold CompressorGard GE 32 632580001 Polyalkylene glycol/polyol ester, ISO 32
Ingersoll-Rand XL-300 CompressorGard PAO 150 632535001 R&O Mineral oil, ISO 150, discontinued product
Ingersoll-Rand XL-700 CompressorGard DE 100 632526001 Diester, ISO 100
Ingersoll-Rand XL-740 HT CompressorGard DE 150 632528001 Diester, ISO 150

All recommendations set forth herein are based solely upon information and materials available at the time of publication. CITGO Petroleum Corporation
makes no representations or warranties of any kind regarding the completeness or current accuracy of its competitors information set forth herein.
Competitor formulations, claims, and approvals are subject to change without notice. All trademarks other than CITGO, CITGARD, CompressorGard,
Pacemaker, HyDurance and Clarion are registered trademarks of their owners, which are not afliated with CITGO.

Return to
Table of Contents
References
References

Compressor OEM Fluid Cross-reference - (Contd.)


OEM Product Name CITGO Product Name Mat. Code Competitive Product Co
Kaeser Kaeser Sigma 4000 M-100 Pacemaker T-115, 633745001, Mineral/synthetic blend (5-10% polyol ester), ISO 100
CompressorGard PAO 100 632534001
Kaeser Sigma 4000 M-150 Pacemaker T-150, 633750001, Mineral/synthetic blend (5-10% polyol ester), ISO 150
CompressorGard PAO 150 632535001
Kaeser Sigma 4000 M-460 Pacemaker T-46, 633720001, Mineral/synthetic blend, ISO 46
CompressorGard PAO 46 632532001
Kaeser Sigma 8000 S-100 CompressorGard DE 100 632526001 Diester, ISO 100
Kaeser Sigma 8000 S-150 CompressorGard DE 150 632528001 Diester, ISO 150
Kaeser Sigma 8000 S-320 CompressorGard PAO 32 632531001 PAO, ISO 32
Kaeser Sigma 8000 S-460 CompressorGard PAO 46 632532001 PAO, ISO 46
Kaeser Sigma 8000 S-680 CompressorGard PAO 68 632533001 PAO, ISO 68
LeROI Leroi SSL-32 CompressorGard PAO 32 632531001 Mineral Oil, not sure what vis grade, no web
information available, cross reference info conict
Leroi SSL-46 CompressorGard PAO 46 632532001 PAO ISO /mineral oil blend, 35 centistokes @ 40C
Leroi SSL-50 CompressorGard PAO 46 632532001 PAO/mineral oil blend, 37 centistokes @ 40C

224
Leroi SSL-68 HT No Product Polyol ester, ISO 68
Quincy Quincy Quin-Cip 100 CompressorGard PAO 100 632534001 R&O Mineral oil for reciprocating compressors, ISO
100 - small recips, discharge less than 150C
Quincy Quin-Cip 32 CompressorGard PAO 32 632531001 R&O Mineral oil for reciprocating compressors, ISO
32 - small recips, discharge less than 150C
Quincy Quin-Cip 68 CompressorGard PAO 68 632533001 R&O Mineral oil for reciprocating compressors, ISO
68 - small recips, discharge less than 150C
Quincy Quin-Syn CompressorGard PAO 46 632532001 PAO, ISO 46
Quincy Quin-Syn F Clarion CompressorGard 46 632541001 PAO, ISO 46, H-1
Quincy Quin-Syn HP CompressorGard GE 46 632591001 Polyol ester, ISO 46
Quincy Quin-Syn PG CompressorGard GE 46 632591001 Polyalkylene glycol/ester, ISO 46
Quincy Quin-Syn Plus Clarion CompressorGard 46 632541001 Food Grade PAO, ISO 46
Quincy Quin-Syn IV CompressorGard PAO 46 632532001 Mineral oil/synthetic PAO blend, ISO 46
Quincy Quin-Syn XP No Product Polyol ester, ISO 68

All recommendations set forth herein are based solely upon information and materials available at the time of publication. CITGO Petroleum Corporation
makes no representations or warranties of any kind regarding the completeness or current accuracy of its competitors information set forth herein.
Competitor formulations, claims, and approvals are subject to change without notice. All trademarks other than CITGO, CITGARD, CompressorGard,

Return to
Pacemaker, HyDurance and Clarion are registered trademarks of their owners, which are not afliated with CITGO.

Table of Contents
Compressor OEM Fluid Cross-reference - (Contd.)
OEM Product Name CITGO Product Name Mat. Code Competitive Product Co
Sullair Sullair 24KT No Product Silicon, ISO 32
Sullair AWF CITGARD 600 10W 622610001 Mineral oil, extends warranty to 5 years, 5W-20
Sullair AWF CompressorGard PAO 46 632532001 Mineral oil, extends warranty to 5 years, 5W-20
Sullair SRF 1/4000 CompressorGard PAO 46 632532001 Parafnic Mineral oil viscosity 30-40 cSt at 40C
Sullair SRF II/8000 CompressorGard PAO 46 632532001 Parafnic Mineral oil viscosity 35.6 cSt at 40C
Sullair Sullube CompressorGard GE 32 632580001 Polyalkylene glycol/ester blend, SAE 5W-20
Sullair Sullube 32 CompressorGard GE 32 632580001 Polyalkylene glycol/ester blend, ISO 32, renamed
Sullube
Sullair Sullube 60 No Product Polyalkylene glycol/ester blend, ISO 68
Sullivan-Palatek AFX 32 CompressorGard GE 46 632591001 Polyol Ester blend, ISO 46
Sullivan-Palatek Palasyn 45 CompressorGard PAO 46 632532001 PAO, ISO 46
Sullivan-Palatek Pallube 32 ComprssorGard GE 32 632580001 Polyalkylene glycol/ester blend, ISO 32

Before making any recommendations or cross reference recommendations for CITGO products, it is strongly suggested that the requirements of the
specic compressor application be reviewed. In some cases, the wrong product may be in service, thus crossing the product to an applicable CITGO
product may lead to future compressor problems or even compressor failures.

225
All recommendations set forth herein are based solely upon information and materials available at the time of publication. CITGO Petroleum Corporation
makes no representations or warranties of any kind regarding the completeness or current accuracy of its competitors information set forth herein.
Competitor formulations, claims, and approvals are subject to change without notice. All trademarks other than CITGO, CITGARD, CompressorGard,
Pacemaker, HyDurance and Clarion are registered trademarks of their owners, which are not afliated with CITGO.

Return to
Table of Contents
References
C I T G O Te c h n i c a l Bulletin
Understanding ISO Cleanliness
Rating System for Hydraulic Fluids (ISO Standard 4406)

It is estimated that 70-80% of hydraulic component Chart 1 ISO 4406 Code Levels
wear can be traced to solid particle contamination. The
Particle count range (per ml)
most common sources of these are wear debris from ISO
pumps, valves, cylinder rods, the sticking of valves, and Code Minimum Minimum
oxidation. A primary step toward gaining control over (included) (excluded)
wear problems is to determine how many, and what size 1 0.01 0.02
particles are present in the hydraulic uid. 2 0.02 0.04
3 0.04 0.08
The means most widely used to represent uid
4 0.08 0.16
cleanliness is the ISO Code Level of the ISO
Cleanliness Rating System. This method of identifying 5 0.16 0.32
the level of contaminants in a uid uses a two digit XY 6 0.32 0.64
code where X represents particles larger than 5um and 7 0.64 1.3
References

Y represent particles larger than 15um. Using Chart 1 8 1.3 2.5


you can determine the cleanliness level of a given uid.
9 2.5 5.0
If, for example, a uid had x (>5um) = 1895 particles per
10 5.0 10
milliliter and Y (>15um) = 152 particles per milliliter, the
uid would have an ISO cleanliness rating of 18/14. The 11 10 20
lower the code numbers, the cleaner the uid. 12 20 40
13 40 80
Some organizations have extended the two standard 14 80 160
code (XY) to three levels by including a code level for
15 160 320
(>2um) particles as well. This three level system is
illustrated in Chart 2. The three level system is being 16 320 640
considered by the ISO committee that oversees this 17 640 1300
standard. 18 1300 2500
19 2500 5000
Chart 3 illustrates some recommended cleanliness
20 5000 10,000
code levels for selected types of hydraulic components.
Some caution should be taken when extracting samples 21 10,000 20,000
for particle counting of any uid. The sample should 22 20,000 40,000
be as representative of the entire hydraulic system as 23 40,000 80,000
possible, and the sample container should be glass and 24 80,000 160,000
super clean. Many containers are certied clean but 25 160,000 320,000
are not clean from solid particulate; they are biologically
26 320,000 640,000
clean (sterile) but may contain many particles. ISO
Standard 3722 should be followed for certifying bottle 27 640,000 1,300,000
cleanliness. 28 1,300,000 2,500,000

Return to
Table of Contents
226
References

Return to
Table of Contents
227
References

Return to
Table of Contents
228
C I T G O Te c h n i c a l B u l l e t i n
Particle Counting Accuracy

Particulate contamination interferes with a lubricants ability to provide friction and wear
protection. Controlling the level of particulates in a lubricant will improve a systems
performance, as well as reduce downtime.

Measurement of particle contamination within a lubricant is usually performed by light-


detecting automatic particle counters. These counters use the properties of light to perform
counts and are highly sensitive to sample preparation. However, even using proper
sample preparation techniques, particle counters can detect phantom particles that cannot
be removed by ltration. This results in high particle detection that is a function of the
formulation of the lubricant itself, and not of the cleanliness of the uid.

References
It is important to note that there are other methods of performing particle counting that
are not susceptible to phantom counts, so there is always a check that can be performed
against light detecting automatic particle counters should results come into question. The
reason for the popularity of light detecting automatic particle counters is the speed of the
test compared to the more labor intensive, yet more accurate testing.

ISO Cleanliness Code


ISO 4406 describes a method of coding solid particles in an oil sample. Results are
delivered in a three number code. The rst code number represents the number of
particles per milliliter of uid at a size of four microns. The second code number represents
the number of particles per milliliter of uid at a size of six microns. The third code number
represents the number of particles per milliliter of uid at a size of 14 microns. The range
between the upper and lower limits for each code number is listed in the table below
and limits increase per code by a factor of two. This means that for each increase of one
ISO code number, the number of particles approximately doubles. For example, an ISO
code of 18/16/14 indicates there are 1301 to 2500 particles at a size of four microns, 321
to 640 particles at a size of six microns, and 81 to 160 particles at a size of 14 microns.
Also, please note that it is common for certain applications to refer to ISO cleanliness
results with only two codes. In this case, the number of particles at a size of 4 microns
is irrelevant, and the two number code refers to the number of particles at six and 14
microns, respectively.

Return to
Table of Contents
229
Scale Particles per million Measuring Fluid Cleanliness
Number more than less or equal Light detecting particle counters
22 20,000 40,000 use a beam of light to quantify the
21 10,000 20,000 contamination level of uids. Basically,
when particles block the path of
20 5,000 10,000
the beam of light, a count is made.
19 2,500 5,000
However, the path of the light beam
18 1,300 2,500 can be disturbed by means other than
17 640 1,300 particles. For example, water droplets
16 320 640 in oil will deect the light beam, and
15 160 320 will be counted as a particulate and
14 80 160 increase the ISO code. Water, although
13 40 80
a contaminant of the lubricant, is not a
particulate in the traditional sense as it
12 20 40
can not be captured and removed by
11 10 20 ltering.
10 5 10
9 2.5 5 Test Procedure
8 1.3 .25 Common lubricant additives
7 0.64 1.3 were introduced into base oils at
References

6 0.32 .64 concentrations typical of the use of the


Table 1. Source: Practicing Oil Analysis
additive. The concentration of each
(January 2008) additive is listed in Table 2.

Chemical Description Function Weight % The base oil was ltered through a 3
50 TBN calcium sulfonate Rust inhibitor 1.6 micron lter until it reached a cleanliness
400 TBN calcium sulfonate Detergent 1.2 of ISO X/16/13 or cleaner. After the
Succinimide Dispersant 1.1 uid reached that level of cleanliness,
Zinc dithiophosphate
Antiwear
1.1 the additive was introduced to the base
agent
oil. The uid was then circulated for 30
Boronated succiminide Dispersant 0.9
minutes, and sample was taken after
Polyacrylate Foam inhibitor 0.05
15 minutes to measure ISO cleanliness.
Polydimethylsiloxane Foam inhibitor 0.02 After 30 minutes, uid was then ltered
DEO additive for an additional 30 minutes, and then
Detergent-inhibitor package 18.8
(75% conc.)
Table 2. Source: Practicing Oil Analysis
ISO cleanliness was measured. Results
(January 2008) are listed in Table 3.

These test results show that all base oils were relatively clean prior to introducing the
additive. The greatest increases were seen with the diesel engine oil package, and the
polydimethylsiloxane (silicone antifoam). All other increases were relatively small and
responded to ltration.

Return to
Table of Contents
230
Conclusion Group I, ISO Code
The test results indicate Base oil Filter off 15 After 30
that silicone antifoam Additive at start of minutes of minutes of
agent produces phantom test, 100F ltration tration
counts in light detecting 50 TBN calcium sulfonate 15/13/<7 13/11/9 13/12/9
particle counters. Silicone 400 TBN calcium sulfonate 15/13/10 15/14/11 13/9/<7
antifoams work by forming Succinimide 13/11/8 16/14/11 16/14/11
an insoluble micelle within Zinc dithiophosphate 16/15/12 17/15/11 17/15/11
air bubble walls that causes Boronated succiminide 16/14/11 17/15/11 17/14/12
the thinning and collapse of Polyacrylate 14/12/8 16/12/10 >28/22/16
the air bubble wall. These Polydimethylsiloxane 15/13/9 >28/22/21 20/16/7
insoluble micelles are
what the particle counter is Diesel engine additive 17/14/<7 22/19/14
package
actually reading as particles.
Much like water, these Table 3. Source: Practicing Oil Analysis
micelles will not be collected (January 2008)
by a lter and reform on the
other side of the lter.

Silicone antifoams are common in lubricants, so consideration must be given before ISO
cleanliness testing can be put into perspective.

References
Knowing that phantom counts can occur can save you loads of frustration and money
attempting to lter lubricants that are actually clean. CITGOs technical help team can
always assist in interpreting ISO Cleanliness results, and help to explain whether results
are due to cleanliness or due to formulation. Please call the CITGO Lubricant Product
Answer Line at 1-800-248-4684 for help interpreting ISO cleanliness, or for further
explanation.

Acknowledgments
Thomas S. Wanke, Milwaukee School of Engineering

Paul W. Michael, Milwaukee School of Engineering Michael A Mccambridge, Milwaukee


School of Engineering

Return to
Table of Contents
231
C I T G O Te c h n i c a l B u l l e t i n
Use of Fire Resistant Hydraulic Fluids

The use of industrial uid power or hydraulics has increased substantially not only in
U.S. industry but also in worldwide industry. In addition to this increase in uid power
usage, we have seen some rather drastic changes in the operating conditions of
industrial hydraulic circuitry.
Increased production demands, larger work pieces, and higher output machinery
have all had the net effect of elevating hydraulic system operating pressures in most
industries. This, in itself, has imposed greater performance demands on hydraulic
uids. Fluids that were designed to perform at 1000 psi cannot adequately satisfy the
requirements of todays pressures of 2000 psi and higher.
With these changes in hydraulic system conditions, we also nd a substantial increase
References

in the volumes of re resistant uids being employed by industry. This has been
brought about, in part, by increased regulations at all levels of government to insure
safe working conditions. In addition to these regulatory codes, management has a keen
awareness of the devastating cost resulting from plant res. As system pressures go
higher, the chance of hydraulic line rupture increases and the potential for re becomes
greater. Therefore, a modern re resistant hydraulic uid must offer the consumer not
only maximum re protection, but must also give him the optimum lubrication and wear
protection necessary for pumps and other hydraulic hardware running at these elevated
pressures.
CITGO FR WG40XD and FR-5046HP are water-glycol re resistant uids developed
and designed specically to operate in high system pressures in the 2000 and 5000 psi
range respectively. CITGO Glycol FR-5046 is specically formulated to meet the high
pressure requirements for mobile equipment and meets the specication for Caterpillar
where a water-glycol product is required. These unique formulations contain more than a
sufcient amount of water to prevent the propagation of res in the event of a hydraulic
line rupture near an ignition source. Moreover, CITGO Glycol FR uids have all the
necessary lubrication and anti-wear properties required of a hydraulic uid for service in
high-pressure, high-output systems. Other advantages include:
Excellent corrosion protection both liquid and vapor phase to the metals commonly
used in hydraulic systems.
The superior heat transfer characteristics of water.
Return to
Table of Contents
232
The viscosity-temperature properties, combined with a very low pour point, prevent or
minimize cavitation and cold start pump wear problems associated with uids having
poorer viscosity-temperature properties.
Compatible with most conventional seals, gaskets, and O rings.
Can be satisfactorily mixed with other water-glycol type uids.
Resistant to oxidation and chemical breakdown.
Will not separate with normal use and storage.

FIRE RESISTANCE
Fire resistance is imparted to CITGO FR WG-40XD and FR-5046HP through its water
content which creates a snufng blanket of steam if the uid comes in contact with an
ignition source. Because of the water content, these products have the ability to prevent
ame propagation when a re occurs. CITGO FR WG-40XD and FR-5046HP have
been tested and approved by Factory Mutual Research.
In order to insure continued re resistance, the water content of CITGO Glycol FR uids
must be maintained above 35%. This is true of any water-glycol uid. In order to insure
against excessivewater evaporation in open hydraulic systems, operating temperatures
should be maintained as low as possible and should not exceed 150F (65.5C).

References
Water control methods are provided in this bulletin for the addition of water to a
particular uid in service.

HEAT TRANSFER
Water and water containing compositions such as CITGO Glycol FR uids are superior
heat transfer media. Water-glycol uids have marked advantages over mineral oils or
synthetic FR uids in this respect.

SHEAR STABILITY
CITGO Glycol FR uids contain water soluble polymers which give the uids their
viscosity properties. The close tolerances in hydraulic pumps and other hardware have
a tendency to break down certain polymers. This action is mechanical shearing. The
special polymers used in formulating CITGO Glycol FR uids are completely resistant
to this mechanical shearing, and the uids will not undergo viscosity change due to
shearing.

VISCOSITY INDEX
The viscosity index of a uid denes the degree to which the uid resists thinning out at
Return to
Table of Contents
233
elevated temperatures. In the viscosity index rating system, the lower the VI number of
an oil or uid, the greater the differential between the uids viscosity measured at 100F
and its viscosity measured at 210F. Therefore, uids with high VI numbers show a
much lower viscosity difference than low VI uids.
CITGO Glycol FR uids have viscosity indexes of 180 and 210 respectively when tested
using the ASTM D 2270 procedure. Shown below is a comparison between CITGO
Glycol FR uids and other commonly used hydraulic uids.

Fluid Type Viscosity Index


R & O Oil 95
A/W Hydraulic Oil 95
Automatic Transmission Fluid 160
10W-30 Motor Oil 140
Synthetic FR Fluid 70
CITGO FR WG-40XD 180
CITGO Glycol FR-5046HP >210
References

The temperature-viscosity relationship of CITGO Glycol FR uids assures the user of


minimum uid thin-out at operating temperatures, hence, better lubricity.

POUR POINT
The pour point of a uid is the measured temperature at which the uid will no longer
ow under prescribed test conditions. CITGO Glycol FR uids have pour points below
-40F. In addition, these uids can be repeatedly frozen and thawed without any loss
whatsoever in homogeneity. The excellent low-temperature ow properties of CITGO
Glycol FR uids, coupled with high viscosity indexes, offer the user the maximum in uid
performance over a wide temperature range. The excellent low-temperature properties
minimize pump problems on cold start and the high VI assures adequate viscosity and
lubricity at running conditions.
The following chart illustrates the uidity characteristics of CITGO FR WG-40XD and
FR-5046HP compared with other uid types.

Return to
Table of Contents
234
100,000
100,000
100,000
20,000
20,000
20,000
5,000
5,000
5,000

1,000
1,000
1,000

200
SUS

200
SUS

200
SUS
VISCOSITY
VISCOSITY

A
VISCOSITY

A
70 A
70
70

B
Viscosity Tempurature Properties of
B
40 Viscosity
Hydraulic Tempurature Properties of
Fluids
B
40

References
Viscosity
Hydraulic Fluids
Tempurature Properties of C
40 Hydraulic Fluids C
A. CITGO FR WG-40XD and FP-5046HP
A.
B. CITGO FR WG-40XD
Conventional and FP-5046HP
High VI Mineral Hydraulic Oil C
A. CITGO
B.
C. Conventional
Typical FR WG-40XD
HighType
Synthetic VI Mineral
and FP-5046HP
Fluid Hydraulic Oil
B. Conventional
C. Typical Synthetic
HighType
VI Mineral
Fluid Hydraulic Oil
C. Typical Synthetic Type Fluid
0 40 100 160 210
0 40 100
TEMPURATURE F 160 210
0 40 100
TEMPURATURE F 160 210
TEMPURATURE F

CORROSION PROTECTION
CORROSION PROTECTION
CORROSION
CITGO Glycol PROTECTION
FR uids are formulated with special corrosion inhibitors to provide
CITGO Glycol FR uids are formulated with special corrosion inhibitors to provide
corrosion
CITGO protection
Glycol FR uidsin both
are the liquid phase
formulated and thecorrosion
with special vapor phase. Vaportophase
inhibitors provide
corrosion protection in both the liquid phase and the vapor phase. Vapor phase
protection
corrosion is especially
protection in desirable
both the whenphase
liquid machines
and do not
the operate
vapor phase. around
Vapor the clock or are
phase
protection is especially desirable when machines do not operate around the clock or are
subject to short-
protection is and long-term
especially desirableshutdowns.
when CITGOdoGlycol
machines not FR uids
operate provide
around the corrosion
clock or are
subject to short- and long-term shutdowns. CITGO Glycol FR uids provide corrosion
protection
subject to to aluminum,
short- and copper,shutdowns.
long-term brass, cast CITGO
iron, steel andFR
Glycol other
metals
uids commonly
provide used
corrosion
protection to aluminum, copper, brass, cast iron, steel and other metals commonly used
in hydraulictocircuitry.
protection aluminum, copper, brass, cast iron, steel and other metals commonly used
in hydraulic circuitry.
in hydraulic circuitry.

LUBRICITY CHARACTERISTICS
LUBRICITY CHARACTERISTICS
LUBRICITY
A CHARACTERISTICS
high level of anti-wear protection is built into CITGO Glycol FR uids. This permits
A high level of anti-wear protection is built into CITGO Glycol FR uids. This permits
usage
A high in hydraulic
level of systems
anti-wear operating
protection up tointo
is built 5000 psi (with
CITGO FR-5046HP),
Glycol providing
FR uids. This the
permits
usage in hydraulic systems operating up to 5000 psi (with FR-5046HP), providing the
hydraulic
usage pumps are designed to operate on5000
water-glycol FR-5046HP),
uids. Prior to converting
hydraulic pumps are designed to operate on water-glycol uids. Prior to convertingthe
in hydraulic systems operating up to psi (with providing
hydraulic pumps are designed to operate on water-glycol uids. Prior to converting
Return to
Table of Contents
235
any system to a water-glycol uid from a conventional or synthetic uid, the equipment
manufacturer should always be consulted to make sure that the circuit hardware is
suitable for water-glycol uids.
The excellent anti-wear properties of CITGO Glycol FR uids have been well
demonstrated in actual eld performance and in laboratory testing. The uids meet all
specications of U.S. Steel Requirement No. 171 including the ASTM D 2282 2000 psi
pump test. The following chart compares CITGO Glycol FR uids to other hydraulic
uids in this high pump. CITGO Glycol FR uids offer the maximum wear protection
available in a water-glycol hydraulic uid.

COMPATIBILITY WITH OTHER WATER-GLYCOLS


CITGO Glycol FR uids are compatible with and miscible in other water-glycol
re resistant uids. This assumes that the competitive uid has been adequately
maintained with the proper amount of water and rust inhibitor and is reasonably free of
contamination.
It is highly recommended that all systems containing a competitive water-glycol uid be
laboratory tested by CITGO prior to installing CITGO Glycol FR uids. These uids will
be tested for the following properties:
References

1. Water Content
2. Rust Inhibitor Level
3. Viscosity
4. Dirt Level
5. Particle Size
Your CITGO representative will be glad to initiate this work including all necessary
sample containers, labels, etc.

SYSTEM CONVERSION
When converting a system to CITGO Glycol FR uids from either a conventional mineral
oil based uid or another type of re resistant or synthetic uid, it is important that the
following procedures be used. Compliance with these conversion procedures will permit
the changeover to proceed with minimum difculty and will extend the service life of the
uid.
1. Make absolutely sure that the pump on the equipment is suitable for water-glycol
service. Consult the manufacturer.
2. Completely drain all uid from the sump, lines, coolers, actuators, etc. Wipe clean.

Return to
Table of Contents
236
3. Remove any interior paint which is not compatible with water-glycol type uids. Sand
blast sump interior down to white metal and apply water-glycol compatible paint
system.
4. Replace any seals or O rings which are not generally recommended for water-
glycol uids.
5. Reconnect lines, accumulators, coolers, etc., using either Teon pressure tape or a
suitable pipe joint compound. Make sure any grease used is water resistant.
6. Replace any lters which are not suitable for water-glycol service. If there is any
doubt, the lter supplier should be contacted for recommendations.
7. Install a mesh strainer on the pump inlet. Usually a 60-mesh screen is adequate. DO
NOT PUT A FILTER ON THE PUMP INLET. Due to the high bulk density of water-
glycol uids and the resultant suction lift demands, the pump inlet must never be
restricted without prior discussion with the pump manufacturer. Cavitation can result
from a restricted pump inlet.
8. When converting from a conventional petroleum uid, perform step 2, ll system with
CITGO Glycol FR uid to a minimum level to maintain pump suction and operate
the system for 30 minutes at reduced pressures. When converting from a synthetic
type or oil-synthetic uid, rst perform step 2, then pre-ush the system with a light,

References
straight mineral oil. Repeat step 2 and then ush with CITGO Glycol FR uid.
9. Drain system immediately and ll to operating level with CITGO Glycol FR uid.
10. Where a system already contains another water-glycol uid, it is permissible to
start using CITGO Glycol FR uid directly as makeup providing the existing uid
is of an acceptable cleanliness level and contains the proper amount of water
and rust inhibitor. Prior to adding CITGO Glycol FR uid to a system containing
another water-glycol uid, it is strongly recommended that the uid in the system
rst be analyzed by CITGOs laboratory. Your CITGO representative will furnish all
necessary bottles, labels, etc., to facilitate this testing.
11. Start up the system and slowly bring it up to normal operating system pressure and
conditions.
12. Periodically check lters and strainers for the rst few weeks of operation. These
components could get clogged with sludge and deposits resulting from the ushing
of the system uid. If the system has been changed from an oil or synthetic type
uid, the CITGO Glycol FR uid may take on a pink, milky appearance. This is
normal and will occur with any water-glycol uid. This is due to slight emulsication
of oil or synthetic uid left in the system after ushing. Normally this emulsion will
break, allowing free oil to be skimmed from the surface in the sump if it is mineral oil
or drained from the bottom if it is a synthetic.
Return to
Table of Contents
237
TOXICITY AND HANDLING
CITGO Glycol FR uids contain no nitrosamines or other established or suspected
carcinogens.
CITGO Glycol FR uids contain diethylene glycol. Should either of these products be
ingested or swallowed, vomiting should be induced immediately, and a physician should
be contacted at once. Breathing of the vapors should be avoided. These products could
cause skin irritation or sensitization in some humans so it is recommended that plastic
or rubber gloves be utilized in handling. After handling, washing with soap and water is
recommended.
CITGO Glycol FR uids contain a basic amine type corrosion inhibitor. Compounds of
this type will cause eye irritation. In case of contact, rinse the eyes with large amounts of
cool water and contact a physician at once.
CITGO Glycol FR uids are slippery liquids and spills constitute a denite safety hazard.
Small spills should be cleaned up immediately by either washing or hosing with water
or by treating the affected area with commercially available spill absorbents. Large spills
must be treated like a petroleum spill.

SEAL AND O RING COMPATIBILITY


References

CITGO Glycol FR uids can be operated with a wide variety of seal and gasket
materials. Elastomers such as natural rubber, Buna N, Buna S, and Neoprene are
unaffected by the uid. Materials such as Viton, Teon, and other similar types are also
satisfactory. The only seal and gasket congurations not acceptable are leather, cork,
cellulose, or other substances which will absorb water and either swell or deteriorate as
a result.

RESERVOIR PAINTS AND COATINGS


All water-glycol type uids will tend to dissolve or deteriorate many conventional paints
and coating systems commonly used in sumps and reservoirs. When converting any
system over to CITGO Glycol FR uids, any paint or coating used in the system which
is known to be incompatible with water-glycol systems should be removed and replaced
with a coatings system which is compatible with water-glycols. Several of the leading
paint suppliers manufacture systems which are acceptable for water-glycol usage. These
suppliers should be contacted for application and paint types to be used.

Return to
Table of Contents
238
PIPE JOINT COMPOUNDS AND GREASES
CITGO Glycol FR uids and all other water-glycol uids may tend to dissolve or
soften certain pipe thread dopes. It is recommended that either Teon pressure tape or
pipe compounds which have water-glycol compatibility be used.
The use of soda based greases in and around hydraulic circuits should be avoided
due to their propensity to emulsify with water-glycol uids. Grease selection should be
restricted to greases having good water tolerance such as lithium, calcium, or aluminum
complex.

WATER CONTROL AND MAKEUP


It is necessary to maintain the water level of CITGO Glycol FR uids within acceptable
limits. Excessive water reduces the uids viscosity and its ability to lubricate and to
seal internal pump clearances. The latter leads to uid backwash. Insufcient water will
render the uid non-re resistant as well as raise its viscosity and bulk density, both of
which will contribute to pump cavitation.
Three acceptable methods may be used to control the water level of CITGO Glycol FR
uids: 1) indirectly by viscosity determination, 2) by refractometer of Brix reading and 3)
directly by laboratory methods using the Karl Fischer titration. The water level of CITGO

References
Glycol FR uids cannot be determined by distillation procedures. The viscosity approach
is not applicable to systems containing more than trace amounts of oil or systems where
the uid is not predominantly CITGO Glycol FR uid. Portable viscosity gauges are
available at nominal costs to determine viscosity at machine-side. It is important that the
gauges be standardized for CITGO Glycol FR uid. The following tables can be used
with acceptable accuracy to determine the amount of water required to adjust the uid to
acceptable limits. Only distilled, deionized, or controlled boiler feed water should be used
as makeup. The use of hard tap water, well or spring water should be avoided since the
dissolved minerals in these waters will react with the additive system in the uid causing
uid haziness and formation of soap-like insoluble material. Never use water that has
been processed through a water softener.

Return to
Table of Contents
239
BRIX READINGS VS. % WATER AND VISCOSITIES FOR CITGO FR WG-40XD
This chart is only valid when the system contains all CITGO FR WG-40 XD

CITGO FR WG-40XD WATER ADJUSTMENT CHART


GALLONS
OF WATER
PERCENT NEEDED
VISCOSITY VISCOSITY
WATER IN PER 100
BRIX (SUS) (cSt) CONDITION
GALLONS OF
UNADJUSTED
AT 100 F AT 40 C FLUID UNADJUSTED
FLUID IN
SYSTEM
50 412 82.5 28.4 18.1
49.5 394 78.8 29.3 17.1
49 377 75 30.2 15.8
48.5 358 71.2 31.2 14.4
48 342 67.9 32.2 13
47.5 324 64.3 33.3 11.5
References

47 309 61.3 34.2 10.2


40.5 294 513.4 35.3 8
46 280 55.6 36.5 7.3
45.5 266 52.7 37.7 5.8

SEVERE LEVEL
45 253 50.1 38.8 4.5

MODERATE LEVEL
44.5 241 47.7 40 3
44 228 45 41.5 1.5
43.5 217 43 42.7 0
NORMAL

43 207 41 43.9 0
42.5 197 38.9 44.5 0
42 187 37 45.5 0

41.5 177 34.5 Excess Water

40 153 30 - Excess Water

Return to
Table of Contents
240
BRIX READINGS VS. % WATER AND VISCOSITIES FOR CITGO GLYCOL
FR-5046HP
This chart is only valid when the system contains all CITGO Glycol FR- 5046HP

WATER
ADJUSTMENT
VIS. cSt VIS. SUS
BRIX # % WATER PER 100
40C 100F
GALLONS OF
FLUID
50 29.2 66.6 328 15
49.5 30 63.8 315 14
49 30.8 61 302 13
48.5 31.6 58.1 288 11
48 32.4 55.5 275 10
47.5 33.2 52.9 262 9
47 34 50.6 251 8
46.5 34.9 48.1 239 7
46 35.7 45.9 229 6

References
45.5 36.6 43.8 218 4
45 37.4 41.8 209 3
44.5 38.2 39.8 198 2
44 38.9 38 190 OK
43.5 39.7 36.2 182 OK
43 40.5 34.6 174 OK
42.5 41.3 33.1 166 OK
42 42.1 31.6 158 OK
41.5 42.9 30.1 152 -1
41 43.7 28.8 145 -3
40.5 44.6 27.3 137 -4
40 45.3 26.1 132 -5
39.5 46.1 25 126 -6
39 46.9 23.9 120 -8
38.5 47.7 22.7 115 -9
38 48.5 21.7 110 -10
37.5 49.3 21 106 -11
37 50.1 19.8 101 -12

Return to
Table of Contents
241
Fluid with viscosity below 31.6 cSt at 40C or Brix readings below 42.0 contain excess
water and only new CITGO Glycol FR-5046HP should be used as makeup.
Only distilled, deionized, or steam condensate water should be used.
For larger or smaller systems than 100 gallons use appropriate multiples or fractions for
water addition based on the actual amount of uid in the system.

ALKALINITY CONTROL
CITGO Glycol FR uids contain alkaline corrosion inhibitors. The uids are blended to
contain a surplus of the additive which is called the alkaline reserve. The inhibitors will
slowly evaporate from the uid which gives vapor phase protection. The hotter the system
operating temperature, the greater the evaporation loss. The inhibitor loss usually goes
hand in hand with the water evaporation loss.
As a rule of thumb, if system operating temperatures are maintained at 120F or
lower, and a normal amount of new CITGO Glycol FR uid is being added as makeup,
no alkaline adjustment will be necessary. Conversely, in systems running at higher
temperatures, the inhibitor loss may occur at a greater rate than normal new uid makeup
can replenish. When this occurs, a portion or all of the uid may require replacement.
The amount of inhibitor in CITGO Glycol FR uid is a measurement of the alkaline content
References

of the uid. It is dened technically as the number of milliliters of 0.1N hydtrochloric acid
necessary to neutralize 100 ml of uid to a pH of 5.5. This can only be determined by a
laboratory titration. The normal alkaline reserve of new CITGO Glycol FR uid ranges
from 160 to 180 ml of 0.1N hydrochloric acid required to neutralize 100 ml of the uid to
the pH of 5.5. It is safe to continue to use CITGO Glycol FR uid so long as the alkaline
content does not fall below 120 in the titration.
If the user of CITGO Glycol FR uid suspects his inhibitor loss may be excessive due to
high operating temperatures and lacks the laboratory equipment necessary to check the
alkaline reserve, the CITGO representative will arrange for sampling of systems and a
CITGO laboratory analysis of the uids.

GOOD FLUID MAINTENANCE


CITGO Glycol FR uids will retain their optimum re protection, impart excellent
resistance against rusting and corrosion, and prolong the service life of hydraulic
components only with good uid maintenance. Proper water content assures re
resistance. Maintaining the alkaline reserve gives maximum corrosion protection. Proper
ltration of dirt and sludge is essential for a well maintained re resistant uid.
CITGO has provided the consumer with superior products in CITGO Glycol FR uids.
Poor or inadequate uid maintenance will result in reduced uid performance and can
certainly lead to reduced or lost production and costly downtime.
Return to
Table of Contents
242
C I T G O Te c h n i c a l B u l l e t i n
CITGO
Wa t e r GTechnical
l y c o ls CoBulletin
m p a tib ility
Water Glycols Compatibility

Water-glycol uids are excellent re-resistant uids. They are normally used in
applications where there is the possibility of exposure of the uid to high temperatures
Water-glycol fluids are excellent fire-resistant fluids. They are normally used in applications
or open ames.
where there is theThey can be
possibility used at of
of exposure lower ambient
the fluid to high temperatures where
temperatures or open uids are likely
flames.
to be
Theysubjected to at
can be used cold weather.
lower ambient However,
temperatures these
where uids
fluidsshould not
are likely to be used where
be subjected to bulk
uidcold weather. However,
temperatures these fluids
will exceed 150F,should
as not
thebewater
used where bulk fluid will
evaporation temperatures
result inwill
an increase
exceed 150F, as the water evaporation will result in an increase in viscosity as well as the loss
in viscosity as wellWater-glycol
of fire resistance. as the loss of are
fluids re compatible
resistance. withWater-glycol
standard seals,but
uidsmayare compatible
react with
withcertain
standard seals,
metals. but may
Care must be takenreact
withwith
pumpcertain
choices metals. Care limitations
or where pump must beare taken with pump
suitable
choices or where
and require pump lubrication.
no boundary limitations are suitable and require no boundary lubrication.
MATERIAL COMPATIBILITY
MATERIAL COMPATIBILITY

FR-40 XD INVERT PHOSPHATE POLYOL OIL

References
MATERIAL FR-5046HP EMULSIONS HWCF ESTERS ESTERS SYNTHETICS
Elastomer, Neoprene Y Y Y N N N
Elastomer, Buna N Y Y Y N Y N
Elastomer, Butyl Y N Y Y N N
Elastomer, E.P.R. Y N Y Y N N
Elastomer, Polyurethane * * * N Y N

Elastomer, Silicone Y Y Y Y Y Y
Elastomer, Teflon Y Y Y Y Y Y
Elastomer, Viton Y Y Y Y Y Y
Filter Media, Cellulosic,
Phenolic Treated Y Y Y Y Y Y
Filter Media, Fiberglass Y N Y Y Y Y

Metals, Ferrous Y Y Y Y Y Y
Metals, Bronze *1 Y *1 Y *1 Y
Metals, Zinc N Y N Y Y Y

Metals, Cadmium N Y N Y Y Y
Metals, Lead N N N Y N Y
Metals, Brass, Copper Y Y Y Y Y Y
Metals, Aluminum, Unanodized N Y N Y Y Y
Metals, Aluminum, Anodized Y Y Y Y Y Y

Y = Compatible * = Low or marginal compatibility N = Not compatible


Bronze with lead content over 20 percent limited to 120F
1

Return to
Table of Contents
243
3 Using ASTM D 445
4 Method C (20 h).
Limit must also be met after testing in CEC L-45-T-93,References
5 The precision of ASTM D 2983 has not been established for determinations made at temperatures below -40 C. This fact
should be taken into consideration in any producer-consumer relationship.
Reprinted with permission from SAE J306 2005 Society of Automotive Engineers, Inc.

COMPARATIVE VISCOSITY CLASSIFICATIONS


ISO Viscosity Grade

22 32 46 68 100 150 220 320 460

Vis. @ 40 C
Min. cSt 19.8 28.8 41.4 61.2 90 135 198 288 414
Max. cSt 24.2 35.2 50.6 74.8 110 165 242 352 506

Vis. @ 100 F No Requirement*


Min. SUS 96 135 191 280 410 615 900 1310 1880
Max. SUS 115 164 234 345 500 750 1110 1600 2300

No Requirement*
Vis. @ 100 C
Min. cSt 4.0 4.97 6.22 7.96 10.30 13.56 17.50 22.40 28.30
Max. cSt 4.5 5.61 7.05 9.09 11.82 15.51 19.96 25.50 32.30

244
AGMA Lubricant Number
1 2 3 4 5 6 7

Vis. @ 40 C
Min. cSt 41.1 61.2 90 135 198 288 414
Max. cSt 50.6 74.8 110 165 242 352 506

Vis. @ 100 F No Requirement*


Min. SUS 193 284 417 626 918 1335 1919
Max. SUS 235 347 510 765 1122 1632 2346

Vis. @ 100 C No Requirement*


Min. cSt 6.22 7.96 10.30 13.56 17.50 22.40 28.30
Max. cSt 7.05 9.09 11.82 15.51 19.96 25.50 32.30
*Viscosities given are not required; however, for informational purposes, viscosities listed are calculated assuming an oil with V.I. of 95.

Return to
Table of Contents
Lower Viscosity Components, Centistokes (cST)

245
Return to
Table of Contents
Higher Viscosity Components, Centistokes (cST)

References
Viscosity Blending Chart Instructions

Example: Determine the relative viscosities, at a common temperature, of the two base
oils to be blended.

Base oil 1: 30cst at 40C Base oil 2: 100cst at 40C

Draw a line between the viscosity values of the two components. A vertical line is then
drawn to indicate the percentage of the Higher Viscosity component and Lower Viscosity
component to intersect this line. At the intersection, draw a horizontal line to the viscosity
scale. This will indicate the viscosity of the combination of the two components.

In the example above, the lighter product is Base oil 1 (30cst) while the higher viscosity
product Base Oil 2 (100cst). We could obtain 60cst at 40C with a 55/45 blend of Base oil
2 and Base oil 1.
References

Return to
Table of Contents
246
Metalworking Product Application Guide - Water Miscible Products
Operation
Materials Indexable Drilling HSS Deep Hole Cut Tap Form Tap End milling Reaming Hobbing Sawing Grinding
tooling Drilling
Plain Steels CITCOOL CITCOOL CITCOOL CITCOOL CITCOOL CITCOOL CITCOOL CITCOOL CITCOOL TRUKUT
SS GP SS GP SS GP SS GP SS GP SS GP SS GP SS GP SS GP GP205
Low Alloy CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS TRUKUT
P GP GP GP GP GP GP GP GP GP GP205
Steels High Alloy CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS TRUKUT
HD HD HD HD HD HD HD HD HD GP205
Steel Castings CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS TRUKUT
HD HD HD HD HD HD HD HD HD GP205
M TRUKUT
CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS
Stainless HD HD HD HD HD HD HD HD HD GP205
Steels
K CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS TRUKUT
GP GP GP GP GP GP GP GP GP

247
Cast Iron GP205
N Aluminum TRUKUT TRUKUT TRUKUT
Non alloys, Copper HD220 TRUKUT TRUKUT TRUKUT TRUKUT HD220 TRUKUT TRUKUT HD220 TRUKUT
Ferrous alloys
TRUKUT HD220 HD220 HD220 HD220 TRUKUT HD220 HD220 TRUKUT GP205
GP205 GP205 GP205
S Heat
CITCOOL 33 CITCOOL 33 CITCOOL 33 CITCOOL 33 CITCOOL 33 CITCOOL 33 CITCOOL 33 CITCOOL 33 CITCOOL 33
HRSA Resistance, TRUKUT
Super Alloys CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS
HD HD HD HD HD HD HD HD HD GP205
(nickelbased)
H High Hardness
CITCOOL 33 CITCOOL 33 CITCOOL 33 CITCOOL 33 CITCOOL 33 CITCOOL 33 CITCOOL 33 CITCOOL 33 CITCOOL 33
Hard alloys, work TRUKUT
CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS CITCOOL SS
Metals Hardening
HD HD HD HD HD HD HD HD HD
GP205
Alloys

The product recommendations on this chart are general guidelines. Consult the CITGO Product Answer Line with details of your specic operation and
metallurgy. CITGO never recommends mixing competitive metalworking products with CITGO metalworking products. Some product changes may require
sampling of the existing uid and extensive cleaning and ushing of the system.

Return to
Table of Contents
References
References

Metalworking Product Application Guide - Straight Oils


Operation
Screw Swiss Deep Hole / Thread
Materials Machine Machining Gun Drilling Forming Gear Hobbing Gear Shaping Grinding
Operations Operations
Plain Steels AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT
TRI-PURPOSE AS Series AS Series AS Series AS Series AS Series IS 15
Low Alloy AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT
P TRI-PURPOSE AS Series AS Series AS Series AS Series AS Series IS 15
Steels High Alloy AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT
TRI-PURPOSE AS Series AS Series AS Series AS Series AS Series IS 15
Steel Castings AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT
TRI-PURPOSE AS Series AS Series AS Series AS Series AS Series IS 15
M AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT
Stainless TRI-PURPOSE AS Series AS Series AS Series AS Series AS Series IS 15
Steels

248
K AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT
Cast Iron TRI-PURPOSE AS Series AS Series AS Series AS Series AS Series IS 15
N Aluminum AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT
alloys, Copper
Non Ferrous alloys TRI-PURPOSE IS Series IS Series IS Series IS Series IS Series IS 15
Heat
S Resistance, AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT
HRSA Super Alloys TRI-PURPOSE AS Series AS Series AS Series AS Series AS Series IS 15
(nickelbased)
High Hardness
H alloys, work AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT AUTOKUT
Hard Metals Hardening TRI-PURPOSE AS Series AS Series AS Series AS Series AS Series IS 15
Alloys

The product recommendations on this chart are general guidelines. Consult the CITGO Product Answer Line with details of your specic operation and
metallurgy. CITGO never recommends mixing competitive metalworking products with CITGO metalworking products. Some product changes may require
sampling of the existing uid and extensive cleaning and ushing of the system.

Return to
Table of Contents
Metal Removal Product Offering
Product Type Citgo Products Typical Applications Market Share
Straight oils Autokut IS Multiple metals 19%
Autokut AS Ferrous alloys
Autokut Tri-Purpose Screw Machine
Soluble Oils Trukut GP 205 Multi-metal GP 28%
Trukut HD 220 Multi-metal HD
Semi-Synthetics CITCOOL SS GP Ferrous only 29%
CITCOOL SS HD Fe and most AL
Synthetics CITCOOL 33 Concentrate Ferrous applications 24%

Metallurgy and Machinability


Ferrous Nonferrous Ferrous Nonferrous Ferrous Nonferrous

References
(>100%) (100-70%) (70-50%) (50-40%) (<40%) (<100%)
Most Wrought 1112* 1020 1070 13xx, 2330, 2340 Most Stainless Titanium
Aluminums Steels
Most Cast 1016 - 1030 2317, 31xx, 41xx 2512, 3310 2515, 3310 Ti-5Al-2.5Sn
Aluminums
Leaded Brass 1109-1144 4027 4047 3240, 4340, 48xx 50100, 51100, Ti-6Al-4V
52100
Magnesium Alloys 4023, 4024, 5120 43xx, 46xx, 51xx 61xx, 8645, 8650 9315 Ti-6Al-6V-2Sn
Zinc Cast Steel 86xx, 87xx 8750, 9445 Tool Steel Ti-8Al-1Mo-1V
Silicon Bronze Cast Iron 91xx, 98xx 1008, 1010, 1015 Ti-8Mn
Brass Stainless Iron Ductile Iron 1050, 1070 Ti-13V-11Cr-3Al
3310, 18-8 Nickel
Wrought Iron Copper
*Machinability rating is determined by normal cutting speed, surface nish, and tool life. Ratings are normalized to the
machinability of B1112 steel, which has been benchmarked as 100% by the American Iron and Steel Institute. Metals
with a rating lower than 100% are less machinable than B1112; metals with a rating greater than 100% are more
machinable than B1112.

Return to
Table of Contents
249
References

Stationary Natural Gas Engine Oil Cross Reference

Pacemaker GEO Pegasus 1005 HDAX 7200 LA, HDAX El Mar LA 4 EXD No Product
1940XL 9200 LA
Pacemaker GEO 1740 Pegasus 905 HDAX 5200 LA El Mar LA 4 Mysella S5 N40
Pacemaker GEO 1640 Pegasus 805 HPLX 3200 LA 40 El Mar Low Ash Mysella S3 N40
Pacemaker LFG LA 40 Pegasus Ultra 605 HDAX LFG 6500 No Product No Product

250
Pacemaker GEO 740 Pegasus 710 HDAX 5300 MA 40 El Mar Mid Ash Mysella S3 S
Pacemaker GEO 1000 Pegasus 701 HDAX 3100, Ashless El Mar Ashless, Heavy Mysella S2 Z
Duty
Pacemaker GEO 1200 Pegasus 701 HDAX 5100, Ashless El Mar Ashless, Mysella S2 Z
Supreme

All recommendations set forth herein are based solely upon information and materials available at the time of
publication. CITGO Petroleum Corporation makes no representations or warranties of any kind regarding the
completeness or current accuracy of its competitors information set forth herein. Competitor formulations, claims,
and approvals are subject to change without notice. All trademarks other than CITGO and Pacemaker are registered
trademarks of their owners, which are not afliated with CITGO.

Return to
Table of Contents
CITGO STATIONARY NATURAL GAS COMPRESSOR LUBRICANT CHART

OIL
ATTRIBUTE

GAS

DILUTION
FORMULA

SOUR GAS
RESISTANT

ENGINE OIL
SWEET GAS
BETTER COLD

COMPRESSOR

4 STROKE GAS
ANTI-EMULSION

HYDROCARBON
CLIMATE FLOW

HIGH MOISTURE
PACEMAKER 1640AE X X X X
COMPRESSORGARD PAG X X X X X X X

CITGEAR SYNTHETIC PAG X X X X X X X

COMPRESSORGARD PAO X X X X X X X
CITGEAR SYNTHETIC HT X X X X X X X

COMPRESSOR OIL 35LP, 45LP X X X X X

PACEMAKER OILS 100, 150, 220 X X X X

CYLINDER OIL 150-5, 220-5 X X X X X

COMPRESSORGARD XA200 X X X X

251
CITGO STATIONARY NATURAL GAS COMPRESSION APPLICATION CHART

OIL
Product
0.6%
0.9%

HIGH
HIGH

ANTI-
<0.1%

BIOGAS
OIL LIFE

FOR LFG/
ENGINE &
ASHLESS,

EMULSION
CATALYST

SOUR GAS
NITRATION
EXTENDED

OXIDATION

ENGINE OIL
ENGINE OIL
CAPABILITY

SWEET GAS
CONDITIONS
CONDITIONS
MID ASH, 0.7-

COMPATIBLE

FORMULATED
LOW ASH, 0.4-

COMPRESSOR

2 STROKE GAS
4 STROKE GAS
Low Ash
PACEMAKER GEO 1900XL X X X X X X X X
PACEMAKER GEO 1700 X X X X X X X X
PACEMAKER GEO 1600 X X X X X
PACEMAKER GEO 800 X X X X X X X X
PACEMAKER GEO LFG LA X X X X X X X
PACEMAKER 1640AE X X X X X X
Mid Ash
PACEMAKER GEO 700 X X X X X X
Ashless

Return to
PACEMAKER GEO 1000 X X X X

Table of Contents
PACEMAKER GEO 1200 X X X X

References
References
Pacemaker GEO Application Chart
STROKE PACEMAKER PACEMAKER PACEMAKER PACEMAKER PACEMAKER PACEMAKER PACEMAKER PACEMAKER
ENGINE/MANUFACTURER PER GEO LFG LA GEO 700 GEO 800 GEO 1000 GEO 1200 GEO 1600 GEO 1700 GEO 1900XL
CYCLE

CATERILLAR
GCM34 4 X X X X
G3600 4 X X X X
G3500 4 X X X X
G3400 4 X X X X
G3300 4 X X X X X X
MWM TCG SERIES, NATURAL GAS 4 X X X X
MWM TCG SERIES, BIOGAS 4 X
PERKINS, NATURAL GAS 4 X X X X
PERKINS, BIOGAS 4 X

FAIRBANKS MORSE 2 X X

GENERAL ELECTRIC
JENBACHER, NATURAL GAS 4 X X X
JENBACHER, BIOGAS 4 X
WAUKESHA VGF F18, H24, L36, P48 4 X X X X

252
G, GL, GLD
WAUKESHA VGF GSI, GSID 4 X X X X
WAUKESHA VHP F3521, L5790, L7042, 4 X X X X X
P9390 G, GSI, GL
WAUKESHA VHP F3514, F3524, L5794, 4 X X X X
L7044, GSI, L5774, L5794, LT
WAUKESHA VHP 5794, 7044GSI WITH 4 X X X X
FACTORY SUPPLIED CATALYST
WAUKESHA 275 GL/GL+ 12V, 16V 4 X X X X X
WAUKESHA APG 16V150LTD 4 X X X X
WAUKESHA APG 12V220GL, 4 X X X X
18V220GL
WAUKESHA COGENERATION 4 X X X X
WAUKESHA BIOGAS 4 X
SUPERIOR 825, 12SGTD, 16SGTD 4 X X X X
AJAX DPC 140LE, 180LE, 280LE, 2 X X
360LE, 540LE, 720LE, 2200LE
SERIES,2800LE SERIES, C 302, E 565

All recommendations set forth herein are based solely upon information and materials available at the time of publication. CITGO Petroleum Corporation

Return to
makes no representations or warranties of any kind regarding the completeness or current accuracy of its competitors information set forth herein. Competitor
formulations, claims, and approvals are subject to change without notice. All trademarks other than CITGO and Pacemaker are registered trademarks of their

Table of Contents
owners, which are not afliated with CITGO.
Pacemaker GEO Application Chart
STROKE PACEMAKER PACEMAKER PACEMAKER PACEMAKER PACEMAKER PACEMAKER PACEMAKER PACEMAKER
ENGINE/MANUFACTURER PER GEO LFG LA GEO 700 GEO 800 GEO 1000 GEO 1200 GEO 1600 GEO 1700 GEO 1900XL
CYCLE

MTU
4000L61 / L62 / L63 4 X X X
4000 L32 / L33 4 X X
4000 L64 4 X

SIEMENS
DRESSER RAND CATEGORY I 4 X X X X
DRESSER RAND CATEGORY II 4 X X X X
DRESSER RAND CATEGORY III 4 X X X X
GUASCOR 4 X X X X
CLARK 2 X X
WORTHINGTON, 2 STROKE 2 X X
WORTHINGTON, 4 STROKE 4 X X X X

WRTSIL 4 X X X X
All recommendations set forth herein are based solely upon information and materials available at the time of publication. CITGO Petroleum Corporation

253
makes no representations or warranties of any kind regarding the completeness or current accuracy of its competitors information set forth herein. Competitor
formulations, claims, and approvals are subject to change without notice. All trademarks other than CITGO and Pacemaker are registered trademarks of their
owners, which are not afliated with CITGO.

Return to
Table of Contents
References
C I T G O Te c h n i c a l Bulletin
EPA amendments to the NESHAP for stationary
reciprocating internal combustion engines (RICE)

On January 14, 2013, the Environmental protection Agency nalized amendments to


the National Emissions Standards for Hazardous Air Pollutants (NESHAP) for stationary
reciprocating internal combustion engines (RICE) and amendments to the NSPS
(New Source Performance Standards) applicable to Stationary Engines. These nal
amendments address several issues affecting RICE engine owners and operators. The
full compliance date for these rules was October 19th, 2013 for owners of Spark Ignition
(SI) stationary engines.

For reference, these rules are codied in the Federal Register at;
40 CFR Part 63 Subpart ZZZZ (NESHAP)
40 CFR Part 60 Subpart JJJJ (NSPS for SI engines)
References

These nal amendments have determined that certain classications of SI engines


typically used in sparsely populated areas for oil and gas production can comply
with these rules by maintenance practices, instead of emissions based performance
standards. This is in addition to SI engines that were previously eligible for compliance
with maintenance practices. To determine whether your engine is eligible for compliance
by maintenance practices, please contact your EPA compliance representative.

One of the requirements of compliance by maintenance practices is that the owner/


operator change oil every 1440 or 2160 hours, depending on engine size. Drains can be
extended beyond 1440 or 2160 hours, if the operator can provide supporting oil analysis
records that the oil remains within the EPAs condemning limits;

Total Acid Number (TAN) Increase of 3.0 mgKOH/g from TAN when
oil is new
Viscosity Change of 20% from new oil viscosity
%Water Content (By Volume) Greater than 0.5%

Return to
Table of Contents
254
As per the rules referenced the previous table;
Oil analysis must be performed and conducted at the same frequency specied for oil
changes.
If the oil is condemned, the oil must be changed within 2 business days. The operators
or the owners must keep the records of all the oil analysis.

The EPAs condemning limits are relatively wide and CITGO encourages engine owners/
operators to also keep in consideration the engine manufacturers recommendations for
oil change limits. CITGOs GEO LubeAlert oil analysis program for natural gas engine
oils includes a number of important tests that can aid in NESHAP compliance as well as
provide early detection of critical equipment issues.

CITGO has anticipated your extra testing needs, and we stand ready to assist our
LubeAlert users with the EPA requirements referenced above.

Please contact our Product Answer Line at 1-800-248-4684 with any additional
questions.

References

Return to
Table of Contents
255
CITGO SENSITIVE PRODUCT LIST
The following list contains products which CITGO has determined are sensitive in nature.
Repackaging of the products on this list is either prohibited, or requires CITGO approval. The
reprinting of labels and other material is also prohibited or subject to approval.

CITGO GREASES
The repackaging of CITGO greases requires approval from Technical Services. The reprinting of
CITGO grease labels and other material also requires approval.

CITGO INDUSTRIAL FLUIDS


The following CITGO Industrial uids are prohibited from repackaging and the printing of labels
and other material:
CITGO HyDurance AW CP Fluid
References

CITGO FR WG-40XD Hydraulic Fluid


CITGO Glycol FR-5046HP

The following CITGO Industrial uids require Technical Services approval before repackaging or
the printing of labels and other materials:
CITGO HyDurance AW NZ Fluids
CITGO HyDurance AW Super NZ Fluids
CITGO HyDurance AW Synthetic Fluids

CITGO INDUSTRIAL GEAR OILS


The following CITGO Industrial Gear Oils require Technical Services approval before repackaging
or the printing of labels and other materials:
CITGO CITGEAR OGL-A

CITGO CITGEAR MGW-OGL


CITGO CITGEAR SYNTHETIC EP LUBRICANTS


CITGO CITGEAR SYNTHETIC HT LUBRICANTS


CITGO CITGEAR SYNTHETIC PAG GEAR FLUIDS


CITGO EP GEAR SEMI-SYNTHETIC 68


CITGO CITGEAR WT 320

Return to
Table of Contents
256
CITGO SMALL ENGINE OILS
The repackaging of CITGO Small Engine Oils requires approval from Technical Services. The
reprinting of CITGO Small Engine Oils labels and other material also requires approval.

CITGO AUTOMOTIVE GEAR OILS


The following CITGO Automotive Gear Oils are prohibited from repackaging and the printing of
labels and other material:

CITGO Synthetic Gear Lubricants


The following CITGO Automotive Gear Oils require Technical Services approval before
repackaging or the printing of labels and other materials:
CITGO CITGEAR Synthetic HD Gear Lubricants

CITGO ENGINE OILS (PCMO)


The following CITGO Engine oils (PCMO) require Technical Services approval before repackaging
or the printing of labels and other materials:
CITGO SUPERGARD Synthetic Motor Oils

CITGO ENGINE OILS (HDEO)

References
The following CITGO Engine oils (HDEO) require Technical Services approval before repackaging
or the printing of labels and other materials:
CITGO CITGARD SynDurance PLUS Synthetic Heavy Duty Engine Oils

CITGO TRANSMISSION/POWER FLUIDS


The following CITGO Transmission / Power uids are prohibited from repackaging and the printing
of labels and other material:
CITGO TRANSGARD ATF, MERCON V

CITGO TRANSGARD ATF +4


CITGO TRANSGARD DEXRON -VI ATF


The following CITGO Transmission / Power uids require Technical Services approval before
repackaging or the printing of labels and other materials:
CITGO QuatraSyn Synthetic Transmission Fluid

CITGO SynDurance All Seasons Heavy-Duty Transmission Fluid


CITGO TRANSGARD CVT Fluid


CITGO TRANSGARD Multi-Vehicle High-Viscosity ATF


CITGO TRANSGARD Synthetic Multi-Vehicle Low-Viscosity ATF


Return to
Table of Contents
257
CITGO RAILROAD LUBRICANTS
The following CITGO Railroad lubricants require Technical Services approval before repackaging
or the printing of labels and other materials:
CITGO Railroad Car Journal Oil No. 9
CITGO RD-969 & RD-1069 Diesel Engine Oil
CITGO RD-2069 LE Diesel Engine Oil

CITGO FUNCTIONAL PRODUCTS


The following CITGO Functional products require Technical Services approval before repackaging
or the printing of labels and other materials:
CITGO Press Oil 68
CITGO SATISOL Concrete Form Release
CITGO Wireline Lubricants
CITGO Ice Machine Oil 68
CITGO North Star Refrigeration Oils

CITGO Pacemaker HV Oils


CITGO METALWORKING FLUIDS


All CITGO METALWORKING Fluids require Technical Services approval before repackaging or
References

the printing of labels and other materials.

CITGO INDUSTRIAL GAS ENGINE OILS


All CITGO Industrial Gas Engine Oils require Technical Services approval before repackaging or
the printing of labels and other materials.

CITGO COMPRESSOR LUBRICANTS


The following CITGO Compressor lubricants require Technical Services approval before
repackaging or the printing of labels and other materials:
CITGO CompKleen Synthetic Cleaner

CITGO CompressorGard DE

CITGO CompressorGard GE

CITGO CompressorGard H

CITGO CompressorGard IPG


CITGO CompressorGard PAG


CITGO CompressorGard PAG 150 VR


CITGO CompressorGard PAO


CITGO CompressorGard PS Fluids


CITGO CompressorGard SS

CITGO Pacemaker ST-32


Return to
Table of Contents
258
GHS Label Compliance was required by June 1, 2015
In order to meet the requirements of the new U.S. OSHA Hazard Communication
regulations that have adopted the Globally Harmonized System (GHS) of classication
and labeling of chemicals, CITGO is making changes to workplace labels for
containers that hold ve or more gallons, or 35 or more pounds, including pails, kegs,
and drums.

How does this affect you?


All marketers who have a CITGO repackaging agreement and print product shipping
labels require a specic color printer and compliant labels. The required CITGO printer

References
is the Lexmark C792E and can be purchased along with the new labels through
1-800-656- 9476 ext. 130.
Jeff VanDonsel at Reliance, 1-800-656-9476 130. You can also order labels on
MarketNet under Account Management>>Product Labels>>Print GHS Labels.

Return to
Table of Contents
259
C I T G O Te c h n i c a l B u l l e t i n
Lubricant Storage

Five Key Lubricant Storage Tips

1. Keep it clean
2. Keep it cool
3. Keep it dry
4. Know how to spot contamination/storage instability
5. Practice FIFO (rst in, rst out)
References

1. Keep it clean
Contamination sources:
- Air, airborne particle & water ingression
- Dirty transfer containers/equipment
Label transfer containers and funnels (consider color coding) and keep them as
specic as possible (engine, hydraulic, etc). Containers should be sealable!
Use separate pumps for separate types of products and ush well with the next
product.
Keep clean rags, sampling equipment, small containers in a storage cabinet.
Keep drums indoors if possible, with a desiccant breather in humid environments.
Outdoor drums: lie sideways on notched planks, keep bungs sealed & positioned at
3&9 oclock to prevent air entrainment through drum breathing.

2. Keep it cool
Exposure to temperature extremes shortens shelf life by reducing effectiveness of
some additives keep temperature moderate (32-77F optimal).
Return to
Table of Contents
260
- Products containing water (emulsiable cutting oils, re resistant uids) or fatty
oils (cylinder oils, some cutting oils) should be kept above freezing to avoid
component separation.
- Avoid storage near heaters, ovens, etc.
Avoid light exposure use the original container when possible.
Temperature variation causes containers to breathe when they expand and
contract (drawing in air, dirt and moisture).

References
(Image source: Noria Corporation)

3. Keep it dry
Water contamination in oil reduces equipment and oil life through:
- Excessive wear
- Corrosion
- Filter plugging
- Oxidation
- Additive depletion
- Increased viscosity
Pumps, transfer containers, funnels and any other equipment contacting lubricants
must be dry.
Lubricants absorb moisture from humid air and condensation.
Keep containers out of washing areas.
Drums will quickly rust through if stored on a damp surface elevation on planks or
pallets is advised, whether indoors or out.

Return to
Table of Contents
261
Outdoor drums must be covered with a shelter or tarp. Upright storage is not
recommended for uids, but if necessary use drum covers (preferred) or tilt the
drum so water does not pool (less preferred).

4. Know how to spot contamination/storage instability


New oil should be bright and clear.
Milky appearance: water contamination
Signicant color change from new oil: possible oxidation or oil mixing
Haze or signicant sediment: possible particulate contamination
Gel or sticky liquid at bottom: additive settling
Signicant change in odor: oxidation or bacteria
Normal oil aging:
- Gradual color change
- Minor settling of additives
- Oil separation on grease surface (okay to discard oil; store cartridges upright to
References

minimize separation)

5. Practice FIFO (rst in, rst out)


To minimize exposure to harmful environmental conditions, use rst in/rst out
inventory practices, especially for drums. Label containers with the date received.
Follow the manufacturers guidelines for shelf life.
Does your CITGO container still have a batch code? The CITGO Answer Line can
help you determine when the product was manufactured.
- Format: 4-5 numbers, letter (usually C or O), 4 numbers (Ex: 02351C2344)
- Call or email: 800-248-4684 or lubeshelp@citgo.com. Photos welcome.

Return to
Table of Contents
262
C I T G O Te c h n i c a l B u l l e t i n
How to Take a Sample

The Sample: Oil samples should be representative of the system from which they are
taken. This can be accomplished by following a few simple procedures.
1. Ideally the equipment being sampled should be brought to operating temperature
prior to collecting the sample. This will assure that any insoluble and semi-soluble
materials are suspended evenly throughout the system. Samples taken from
equipment that has been inactive for long periods are not representative.
2. If possible, take the sample while the machine is in operation, from an area where
the oil is owing before the lter.
3. Do not collect a sample from a reservoir shortly after an oil change or the addition of

References
a large amount of makeup oil.
4. Samples for ongoing analysis should always be taken in the same manner and from
the same point.
5. Do not take samples from the uid surface or from the very bottom of the reservoir
unless you desire identication of a contaminant layer occurring there.
6. Always use a clean, dry container provided by CITGO. Make sure contamination
does not enter the container while the sample is being taken. Dust and rain storms
can cause misinterpretations.
7. Grease samples must also be representative of the system from which they are
taken. A clean scoop or paddle may be used to transfer the grease to a suitable
container for shipping.
8. Completely ll out the identication form. It is important to note all elds. Hours on
the oil and make up oil will determine the severity of the wear metal results. The
oil must be properly identied. Add a note if the sample was taken under special
circumstances, such as from the oil lter or after failure.
9. Send in the sample promptly. Do not save samples to send in multiple samples
together. If there are critical problems you will receive notication.
10. Follow up on any recommendation that is made by the report. No action may be the
Return to
Table of Contents
263
correct follow up. An employee trained to monitor the results and the process is a
very valuable asset.
Sample Container: Use appropriate containers provided by the CITGO Product
Technology Laboratory to avoid contamination. Store them in a clean, dry place until
ready to use them. These can be provided to you by your Territory Sales Manager or
your Technical Representative.

Sampling Methods
Sample (vacuum) Gun Method Used correctly, a sample gun or vampire allows the
user to draw representative oil samples quickly and with a minimum amount of effort.
Measure a sufcient length of new clean tubing to reach from the gun into the
equipments sump or reservoir. Since the tubing is supplied in coils, it may be necessary
to straighten it. If the unit has a dipstick, the tubing should be measured against the
dipstick to assure proper length.
Note: Install new tubing after each use to avoid sample cross
contamination.
Good practice dictates the use of a new length of tubing for each
References

sample. If you run out of tubing or for some other reason must
use the tubing again, ush it once
Loosen the nut on the sample gun head, insert one end of the
tubing through the nut to about 1/2 inch past the threaded part of
the gun head and tighten the nut. Screw a clean bottle into the
gun adapter.
Holding the pump upright, ll the bottle to within 1/2 inch of the
top. Beak the vacuum by partially unscrewing the bottle or using the vacuum button.
Remove the bottle, screw the cap on ush it and wipe the bottle clean. Fill out the bottle
label and afx it to the bottle.
Sample Valve/Petcock Method Care should be taken to install the valve at the
proper point in the lube system. (Consult equipment dealer or manufacturer.) If the valve
or petcock outlet is internally threaded, a pipe plug should be installed; if externally
threaded, a cap should be installed or the valve handle secured to prevent accidental
opening and loss of uid during operation. This will also keep out dirt and debris. The
valve exterior and area around it should be wiped or brushed clean prior to drawing
a sample. Drain about one quart of uid into a clean container to later be discarded
back into the reservoir or waste oil tank. This procedure clears the valve of sediment or
stagnant uid. Now catch your sample in a new clean, dry bottle, lling it to within 1/2
inch of the top. Screw the cap on tightly, wipe clean and attach the completed label.
Return to
Table of Contents
264
Oil Drain Method Clean the area around the drain plug
thoroughly to avoid sample contamination. Allow a quart or
more of the oil to drain out into a container to be discarded
back into the system or into a waste oil tank. Place a clean, dry
sample bottle in the oil stream and ll to within 1/2 inch of the
top. Screw the cap on tightly, wipe clean and attach label.
Sample Size: Investigative analysis typically requires more DRAIN
PLUG
uid than routine monitoring programs therefore, a one
quart sample for uids is normally required, a gallon sample is
normally required for grease. Your CITGO representative can
advise you if a larger sample might be required.
Sample Identication: A copy of the Express Test or Technical Service Request (TSR)
form (provided by your CITGO Account Manager) should be included with the sample.
The sample must be labeled with the TSR number, the marketers name and contact
information, and the name of the end user.
DO NOT HOLD SAMPLES SHIP THE SAME DAY THEY ARE TAKEN.

References

Return to
Table of Contents
265
Glossary of Common Industry Terms & Acronyms

ACEA
Association of the European Automobile Manufacturers

Additive
Any material added to a base stock to change its properties, characteristics or
performance.

AGMA
American Gear Manufacturers Association

Antiwear agents
Additives or their reaction products, which form thin tenacious lms on highly loaded
parts to prevent metal-to-metal contact.

API
American Petroleum Institute

ASTM International
References

Formerly ASTM, the American Society for Testing and Materials

Brookeld viscosity
Measure of apparent viscosity as determined by the Brookeld viscometer at a controlled
temperature and shear rate.

CARB
California Air Resources Board

Cavitation
The formation and subsequent collapse of vapor within a liquid. This can result in
damage due to metal removal.

CID
Commercial Item Description (U.S. Military)

CMA
Chemical Manufacturers Association

CRC
Coordinating Research Council

Return to
Table of Contents
266
Detergent
A material added to lubricant to keep parts clean. A secondary function is as a rust
inhibitor.

EMA
Engine Manufacturers Association

Flash Point
Minimum temperature at which a uid will support instantaneous combustion (a ash)
but before it will burn continuously. Flash point is an important indicator of the re and
explosion hazards associated with a petroleum product.

ILSAC
International Lubricant Standardization and Approval Committee

JASO
Japanese Automobile Standards Organization

Kinematic Viscosity
A measure of a uid resistance to ow under gravity at a specic temperature, usually

References
40 or 100C.

NLGI
National Lubricating Grease Institute

NMMA
National Marine Manufacturers Association

Oxidation
Occurs when oxygen attacks petroleum uids. It leads to increased viscosity and
deposit formation.

Poise
Measurement unit of a uids resistance to ow, i.e. viscosity. Usually reported in 1/100
or centiPoise (cP).

Pour Point
An indicator of the ability of a uid to ow at cold operating temperatures.

SAE
Society of Automotive Engineers

Return to
Table of Contents
267
STLE
Society of Tribologists and Lubrication Engineers

Stoke
A unit of measure of kinematic viscosity. Usually reported in 1/100 or centiStoke (cSt).

Viscosity
A measure of a uids resistance to ow.

Viscosity Index (VI)


Relationship of the viscosity to the temperature of a uid. It is determined by measuring
the kinematic viscosity of the uid at 40 and 100C. It is calculated using a formula in
ASTM D2270. High viscosity index uids tend to display less change in viscosity with
temperature than low VI uids.

Zinc (ZDP)
Common name for zinc dithiophosphate, an antiwear/oxidation inhibitor chemical.
References

Return to
Table of Contents
268
Products by 40C Viscosity
Material Number Product Viscosity 40C Viscosity 100C
639461 RUST-O-LENE ST 3
639333 CITCOOL 33 CONCENTRATE 4
633091 DIAMOND OIL 12 12 3.0
637001 SENTRY OIL 15 16 3.3
639430 AUTOKUT AS 15 17 3.8
639440 AUTOKUT IS 15 18 3.9
637019 SENTRY OIL 19 19 4.3
638033 AMPLEX 22 20 3.7
643205 CONCRETE FORM OIL 20 3.8
633092 DIAMOND OIL 20 20 4.3
627910 PROCOIL 910 20 4.2
639465 QUENCHOL 521 21 7.2
633013 PACEMAKER OIL 19 22 4.6
633606 HYDURANCE AW 22 22 4.5
633623 HYDURANCE AW CP FLUID 26 5.4
633140 TRANSGARD ATF DEXRON-VI 30 6.0
639450 AUTOKUT TRI-PURPOSE 30 5.3
627915 PROCOIL 915 30 5.3
632531 COMPRESSORGARD PAO 32 30 5.8

References
633137 TRANSGARD MULTI-VEHICLE LOW VISCOSITY ATF 30 6.0
632515 PACEMAKER ST-32 31 5.7
639432 AUTOKUT AS 32 31 5.6
633621 HYDURANCE AW ALL TEMP FLUID 32 31 6.3
633615 HYDURANCE AW NZ FLUID 32 32 5.5
643102 NORTH STAR REFRIGERATION OIL 32 32 4.7
633001 PACEMAKER OIL 32 32 5.2
633715 PACEMAKER T-32 32 5.5
633792 PACEMAKER XL-32 32 5.6
637004 SENTRY OIL 32 32 5.4
621602 SUPERGARD MARINE PLUS 2-CYCLE ENGINE OIL 32 5.9
632610 ELO 32 32 5.6
633607 HYDURANCE AW 32 32 5.6
633491 AW HYDRAULIC OIL 32 33 5.6
637203 SLIDERITE 32 33 5.9
632523 COMPRESSORGARD DE 32 33 5.3
639560 SATISOL CONCRETE FORM RELEASE 34
633311 TRANSGARD LOW-TEMP TRACTOR HYDRAULIC FLUID 34 7.2
632344 COMPRESSORGARD PAG 32 34 7.6
633135 TRANSGARD MULTI-PURPOSE ATF 34 7.0
633134 TRANSGARD CVT FLUID 35 7.1
Values shown are typical values only and do not constitute a specication. The information contained herein is subject
to change without notice.

Return to
Table of Contents
269
Products by 40C Viscosity
Material Number Product Viscosity 40C Viscosity 100C
633179 TRANSGARD ATF +4 35 7.4
633122 TRANSGARD ATF MERCON V 35 7.6
633131 TRANSGARD MULTI-VEHICLE HIGH VISCOSITY ATF 35 7.2
639468 TRUKUT GP 205 35
633935 AW HYDRAULIC OIL SUPER MV 36 7.9
632493 QUATRASYN SYNTHETIC TRANSMISSION FLUID 37 7.3
620858 SUPERGARD FULL SYNTHETIC MOTOR OIL 0W-16 37 7.2
632580 COMPRESSORGARD GE 32 38 7.1
633321 TRANSGARD HD TRANS FLUID 10W 38 6.3
622610 CITGARD 600 10W 41 6.9
633105 TRANSGARD ATF TYPE F 41 7.6
633302 TRANSGARD TORQUE CONVERTER FLUID 250 42 7.2
634104 PACEMAKER HV 39 42 6.4
632532 COMPRESSORGARD PAO 46 43 7.5
633602 HYDURANCE AW SYNTHETIC FLUID 46 43 7.3
620864 SUPERGARD FULL SYNTHETIC MOTOR OIL 0W-20 44 8.4
633720 PACEMAKER T-46 45 6.8
639443 AUTOKUT IS 46 45 6.9
633002 PACEMAKER OIL 46 45 6.7
References

639433 AUTOKUT AS 46 46 7.1


633616 HYDURANCE AW NZ FLUID 46 46 6.9
620860 SUPERGARD SYN MO 0W-20 46 8.5
633492 AW HYDRAULIC OIL 46 47 7.0
633608 HYDURANCE AW 46 47 7.0
633622 HYDURANCE AW ALL TEMP FLUID 46 47 8.1
633212 ROCK DRILL OIL 46 48 7.7
637130 HYTHERM OIL 46 49 7.0
620802 SUPERGARD MO 5W-20 50 8.2
639466 QUENCHOL 624 52 7.4
639460 RUST-O-LENE LT 52
620859 SUPERGARD SYN MO 5W-20 52 8.7
633618 HYDURANCE AW SUPER NZ FLUID 53 9.9
632591 COMPRESSORGARD GE 46 55 9.9
643105 NORTH STAR REFRIGERATION OIL 54 55 6.7
621611 SUPERGARD AIR-COOLED 2-CYCLE ENGINE OIL 55 8.5
621612 SUPERGARD SEA & SNOW 2-CYCLE ENGINE OIL 55 8.5
620861 SUPERGARD SYN MO 5W-30 59 10.5
638036 AMPLEX 58 59 6.7
620805 SUPERGARD MO 5W-30 59 9.8
633310 TRANSGARD TRACTOR HYDRAULIC FLUID 60 9.6
Values shown are typical values only and do not constitute a specication. The information contained herein is subject
to change without notice.

Return to
Table of Contents
270
Products by 40C Viscosity
Material Number Product Viscosity 40C Viscosity 100C
621610 MULTI-PURPOSE AIR-COOLED 2-CYCLE ENGINE OIL 61 8.6
632525 COMPRESSORGARD DE 68 62 7.0
627935 PROCOIL 935 62 8.4
620863 SUPERGARD SYN MO 10W-30 62 10.2
649110 RAILROAD CAR JOURNAL OIL NO. 9 64 8.8
643108 NORTH STAR REFRIGERATION OIL 68 65 8.3
632482 COMPRESSORGARD PS 68 65 8.4
637006 SENTRY OIL 68 65 8.8
639434 AUTOKUT AS 68 65 8.9
620892 SUPERGARD ULTRALIFE MO 5W-30 66 10.9
632599 COMPKLEEN SYNTHETIC CLEANER 66 7.3
632533 COMPRESSORGARD PAO 68 66 10.3
633730 PACEMAKER T-68 67 8.8
633603 HYDURANCE AW SYNTHETIC FLUID 68 67 10.1
661290 HYDRAULIC PRESS OIL 68 68 8.5
620883 SUPERGARD EUROPEAN FORMULA MO 5W-30 68 11.7
634105 PACEMAKER HV 68 68 9.2
633493 AW HYDRAULIC OIL 68 68 9.0
638110 BAR & CHAIN OIL 68 9.5

References
633609 HYDURANCE AW 68 68 9.0
633617 HYDURANCE AW NZ FLUID 68 68 8.5
637131 ICE MACHINE OIL 68 68 8.9
633003 PACEMAKER OIL 68 68 8.3
633821 PRESS OIL 68 68 10.3
637163 WIRELINE LUBRICANT 68 68 10.8
637210 SLIDERITE 68 69 9.1
620813 SUPERGARD MO 10W-30 70 10.4
633592 AW 68 MINING OIL 72 10.7
620893 SUPERGARD ULTRALIFE MO 10W-30 73 10.7
622674 CITGARD SYNDURANCE PLUS HDEO 5W-30 74 11.9
622713 CITGARD 700 10W-30 79 11.9
622613 CITGARD 600 10W-30 81 11.8
620884 SUPERGARD EUROPEAN FORMULA MO 5W-40 83 13.6
632542 COMPRESSORGARD PAG 80 83 16.6
631507 CITGEAR STANDARD XD 75W-90 86 15.1
631507 CITGEAR STD XD 75W-90 86 15.1
631100 CITGEAR XCO 100 92 10.7
622672 CITGARD SYNDURANCE PLUS HDEO 5W-40 93 14.7
638040 AMPLEX 100 94 8.8
632526 COMPRESSORGARD DE 100 95 9.4
Values shown are typical values only and do not constitute a specication. The information contained herein is subject
to change without notice.

Return to
Table of Contents
271
Products by 40C Viscosity
Material Number Product Viscosity 40C Viscosity 100C
620854 SUPERGARD SYN BLD MO 10W-40 95 14.2
633323 TRANSGARD HD TRANS FLUID 30 96 11.3
620814 SUPERGARD MO 10W-40 97 14.1
622675 CITGEAR SYN SYN EO 5W-40 98 15.1
633610 HYDURANCE AW 100 98 11.1
632534 COMPRESSORGARD PAO 100 98 14.1
632554 COMPRESSORGARD SS 100 99 15.1
632546 COMPRESSORGARD IPG 100 100 17.6
633006 PACEMAKER OIL 100 100 10.5
632582 CITGEAR SYNTHETIC EP GEAR LUBRICANT 100 101 14.9
622630 CITGARD 600 SAE 30 102 12.0
633214 ROCK DRILL OIL 100 103 12.1
633625 HYDURANCE AW/AL HVI 100 FLUID 103 14.3
620903 SUPERGARD MO SAE 30 104 11.8
632566 COMPRESSORGARD H 100 105 14.5
620894 SUPERGARD ULTRALIFE MO 10W-40 107 14.5
622685 SYNDURANCE SYN ALL SEASON HD TRANS FL 107 14.7
627950 PROCOIL 950 108 12.0
633745 PACEMAKER T-115 109 12.2
References

631809 SYNTHETIC GEAR LUBRICANT 75W-90 111 15.1


639469 TRUKUT HD 220 111
637099 SENTRY OIL 129 112 13.2
622720 CITGARD 700 15W-40 115 15.3
633746 COMPRESSOR OIL 35LP 115 12.3
622515 CITGARD HD 15W-40 117 15.6
639451 AUTOKUT EXTRUSION OIL 118 15.3
622615 CITGARD 600 15W-40 118 15.6
622215 CITGARD 500 HSE 15W-40 120 15.8
632527 COMPRESSORGARD DE 125 120 14.3
622335 CITGARD TRANSIT LOW ASH EO 15W-40 122 15.6
622335 CITGEAR TLA EO 15W-40 122 15.6
632496 CITGEAR HD SYNTHETIC GEAR LUBRICANT 75W-90 126 16.7
632020 CITGARD CNG/LNG 15W-40 128 15.9
631815 SYNTHETIC GEAR LUBRICANT 50 128 17.6
649279 RD-1019 DIESEL ENGINE OIL 130 14.8
649269 RD-1069 DIESEL ENGINE OIL 134 15.1
631310 PREMIUM GO (MP) 80W-90 139 14.7
649281 RD-2069LE DIESEL ENGINE OIL 140 15.2
638041 AMPLEX 150 141 11.0
649079 RD-919 DIESEL ENGINE OIL 141 14.5
Values shown are typical values only and do not constitute a specication. The information contained herein is subject
to change without notice.

Return to
Table of Contents
272
Products by 40C Viscosity
Material Number Product Viscosity 40C Viscosity 100C
631330 PREMIUM (LS) GO 80W-90 142 14.2
649069 RD-969 DIESEL ENGINE OIL 144 14.8
622640 CITGARD 600 SAE 40 145 14.9
620904 SUPERGARD MO SAE 40 148 14.7
635013 CYLINDER OIL 150-5 149 15.0
633611 HYDURANCE AW 150 149 14.8
632528 COMPRESSORGARD DE 150 150 12.3
633008 PACEMAKER OIL 150 150 16.5
632545 COMPRESSORGARD PAO 150 154 20.2
632555 COMPRESSORGARD SS 150 154 20.1
632348 COMPRESSORGARD PAG 150 154 29.3
632537 COMPRESSORGARD PAG 150 VR 154 29.3
632583 CITGEAR SYNTHETIC EP GEAR LUBRICANT 150 155 19.9
631515 SUPERGARD MARINE PLUS LOWER UNIT GEAR 163 16.0
LUBRICANT 85W-90
620825 SUPERGARD MO 20W-50 163 18.1
622216 CITGARD 500 HSE 20W-50 164 18.6
622625 CITGARD 600 20W-50 164 18.4
632495 CITGEAR HD SYNTHETIC GEAR LUBRICANT 50 168 20.1

References
633748 COMPRESSOR OIL 45LP 171 19.0
632558 COMPRESSORGARD XA 200 180 22.0
632497 CITGARD HD SYNTHETIC 75W-140 185 25.8
632497 CITGEAR HD SYNTHETIC GEAR LUBRICANT 75W-140 185 25.8
631502 REGULAR GEAR OIL 90 200 17.0
633325 TRANSGARD HD TRANS FLUID 50 209 18.8
622650 CITGARD 600 SAE 50 212 19.0
635015 CYLINDER OIL 220-5 216 19.0
632584 CITGEAR SYNTHETIC EP GEAR LUBRICANT 220 220 25.6
631102 CITGEAR XCO 220 220 18.6
633009 PACEMAKER OIL 220 220 18.2
633044 PACEMAKER SD 220 220 18.7
637220 SLIDERITE 220 220 19.6
637167 WIRELINE LUBRICANT 220 220 22.2
632595 COMPRESSORGARD PAG 220 221 41.1
632568 COMPRESSORGARD H 220 225 25.6
637142 GASCOM R 234 20.4
622225 CITGARD 500 25W-60 248 23.9
637141 COMPRESSOR OIL 7585 267 24.0
631814 SYNTHETIC GEAR LUBRICANT 80W-140 273 29.1
632498 CITGEAR HD SYNTHETIC GEAR LUBRICANT 80W-140 289 29.4
Values shown are typical values only and do not constitute a specication. The information contained herein is subject
to change without notice.

Return to
Table of Contents
273
Products by 40C Viscosity
Material Number Product Viscosity 40C Viscosity 100C
631103 CITGEAR XCO 320 320 23.8
633010 PACEMAKER OIL 320 320 23.6
633045 PACEMAKER SD 320 320 23.7
637320 SLIDERITE 320 320 25.6
633217 ROCK DRILL OIL 320 328 26.4
633326 TRANSGARD HD TRANS FLUID 60 330 25.5
633329 FINAL DRIVE OIL 334 25.7
632585 CITGEAR SYNTHETIC EP GEAR LUBRICANT 320 340 35.5
631320 PREMIUM GO (MP) 85W-140 365 26.9
639565 TUL-KUT OIL BASE 370 40.0
635017 CYLINDER OIL 400-5 390 28.0
632587 CITGEAR SYNTHETIC EP GEAR LUBRICANT 460 434 43.0
631104 CITGEAR XCO 460 447 29.7
633012 PACEMAKER OIL 460 456 30.1
633047 PACEMAKER SD 460 460 30.3
637015 SENTRY OIL 460 460 30.5
637169 WIRELINE LUBRICANT 460 460 42.6
635023 CYLINDER OIL 680-7 652 40.0
633014 PACEMAKER OIL 680 676 39.0
References

637170 WIRELINE LUBRICANT 680 680 62.1


632588 CITGEAR SYNTHETIC EP GEAR LUBRICANT 680 689 60.4
637172 WIRELINE LUBRICANT 1500 1,500 120.0
637174 WIRELINE LUBRICANT 5000 5,000 400.0
637179 WIRELINE LUBRICANT 7500 7,500 674.0
637175 WIRELINE LUBRICANT 10000 10,000 800.0
637176 WIRELINE LUBRICANT 12000 12,000 1100.0
Values shown are typical values only and do not constitute a specication. The information contained herein is subject
to change without notice.

Return to
Table of Contents
274
Approximate Equivalence of Viscosity Grading Systems
SAYBOLT
ASTM ISO AGMA SAE SAE VISCOSITIES APPROX.
cSt INDUSTRIAL GEAR GEAR CRANKCASE SUS/ SUS/ cSt
40C OILS OILS OILS OILS 100F 210F 100C
1800 8000 70
1500 300
1400
250 6000 60
1000 1000 8A 5000
800 4000 50
680 8 200
600 3000 40
190
460 7
2000 30
400 140
320 6 60
300 1500
110 100
50 20
220 5 1000 90
200
90 800 80
150 4 40 15
140 70
600
100 3 85W 500
100

References
30 60
80 400 10
55
68 2 80W
60 20 300 8
16 50
46 1
40 12 200 6
75W 45
32
30 8 15W 150 5
10W
22 40
20 5W, 0W 100 4
15
14 80
70 3
10 10 60
8
7 Viscosities can be related 50 2
horizontally only. Viscosities
6 based on 95 VI single grade oils.
5
4 40
SAE 75W, 80W, 85W, 5W, 10W and

3 3 Equivalent viscosities for 100


and 210F are shown. 35
2 2
LM 170111003

Return to
Table of Contents
275
PRODUCT INDEX
CITGO A/W 68 Mining Hydraulic Oil . . . . . . . . . . . . . . . . . . 85 CITGO CompressorGard PS 68 Fluid . . . . . . . . . . . . . . . 204
CITGO A/W Hydraulic Oils . . . . . . . . . . . . . . . . . . . . . . . . . 86 CITGO CompressorGard SS . . . . . . . . . . . . . . . . . . . . . 205
CITGO A/W Hydraulic Oils Super MV . . . . . . . . . . . . . . . . 87 CITGO CompressorGard XA 200 . . . . . . . . . . . . . . . . . . 206
CITGO Amplex Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 CITGO Concrete Form Oil . . . . . . . . . . . . . . . . . . . . . . . . 178
CITGO AR Slushing Oil . . . . . . . . . . . . . . . . . . . . . . . . . . 133 CITGO Cotton Picker Spindle Grease . . . . . . . . . . . . . . . . 60
CITGO Autokut AS Series . . . . . . . . . . . . . . . . . . . . 134-135 CITGO Cylinder Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
CITGO Autokut IS Series . . . . . . . . . . . . . . . . . . . . . 136-137 CITGO Diamond Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
CITGO Autokut Extrusion Oil . . . . . . . . . . . . . . . . . . . . . . 138 CITGO ELO 32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90-91
CITGO Autokut Tri-Purpose . . . . . . . . . . . . . . . . . . . 139-140 CITGO EP Compounds . . . . . . . . . . . . . . . . . . . . . . . 127-128
CITGO Bar and Chain Oil . . . . . . . . . . . . . . . . . . . . . . . . . 177 CITGO EP Gear Semi Synthetic 68 . . . . . . . . . . . . . . . . . 129
CITGO CITCOOL 33 Concentrate . . . . . . . . . . . . . . 141-142 CITGO Final Drive Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 41-42
CITGO CITCOOL SS GP . . . . . . . . . . . . . . . . . . . 143-144 CITGO FR WG-40XD Hydraulic Fluid . . . . . . . . . . . . . . 92-93
CITGO CITCOOL SS HD . . . . . . . . . . . . . . . . . . . . 145-146 CITGO Gascom R Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
CITGO CITGARD 500 Engine Oil . . . . . . . . . . . . . . . . . . . 10 CITGO Glycol FR-5046HP . . . . . . . . . . . . . . . . . . . . . . 94-95
CITGO CITGARD 500 HSN Engine Oil CITGO Hydraulic / Press Oil 68 . . . . . . . . . . . . . . . . . . . . 180
SAE 20W-50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CITGO HyDurance AW/AL HVI-100 Fluid . . . . . . . . . . . 96-97
CITGO
CITGO CITGARD
CITGARD 500

500 HSNHSN Engine
Engine Oil Oil CITGO HyDurance
CITGO HyDurance AW

AW All All Temp
Temp Fluids
Fluids . . . . . . . . . . .
. . . . . . . . . . . 98-100
98-100
SAESAE 15W-40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15W-40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
12 CITGO HyDurance
CITGO HyDurance AWAW CP CP Fluid . . . . . . . . . . . . . . .
Fluid . . . . . . . . . . . . . . . 101-102
101-102
CITGO
CITGO CITGARD
CITGARD 500

500 HSNHSN Engine
Engine Oils Oils -- CITGO
CITGO HyDurance
HyDurance AW

AW Fluids . . . . . . . . . . . . . . . . . .
Fluids . . . . . . . . . . . . . . . . . . 103-105
103-105
Monogrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monogrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 13 CITGO
CITGO HyDurance
HyDurance AW

AW Mining
Mining FluidFluid . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 106
106
CITGO
CITGO CITGARD
CITGARD 600

600 Engine
Engine Oils Oils -- CITGO
CITGO HyDurance
HyDurance AW

AW NZ NZ Fluids . . . . . . . . . . . . . . .
Fluids . . . . . . . . . . . . . . . 107-108
107-108
Monogrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monogrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1514-15 CITGO
CITGO HyDurance
HyDurance AW

AW Super
Super NZ NZ Fluid
Fluid . . . . . . . . . .
. . . . . . . . . . 109-110
109-110
CITGO
CITGO CITGARD
CITGARD 600

600 Multi-Viscosity
Multi-Viscosity Grade . . . . . . . . . .
Grade . . . . . . . . . . 16 16 CITGO HyDurance
CITGO HyDurance AWAW Synthetic
Synthetic Fluids . . . . . . . . . 111-112
Fluids . . . . . . . . . 111-112
CITGO
CITGO CITGARD
CITGARD 700

700 Synthetic
Synthetic CITGO
CITGO Hytherm

Hytherm OilOil 46
46 . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . 181
181
Blend
Blend Engine
Engine Oils
Oils . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18
17-18 CITGO
CITGO Ice Machine Oil
Ice Machine Oil 6868 . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 182
182
CITGO
CITGO CITGARD
CITGARD 700

700 MFEMFE Synthetic
Synthetic CITGO Jet
CITGO Jet Lubricant
Lubricant TM TM . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . 6161
Blend
Blend Engine
Engine Oil
Oil SAE
SAE 10W-30
10W-30 and and 15W-40 . . . . . . .
15W-40 . . . . . . . 19-20 19-20 CITGO
CITGO Lithoplex
Lithoplex CM

CM & & HMHM Greases . . . . . . . . . . . . . . 62-63
Greases . . . . . . . . . . . . . . 62-63
CITGO
CITGO CITGARD
CITGARD HD

HD Engine
Engine Oil . . . . . . . . . . . . . . . . . . .
Oil . . . . . . . . . . . . . . . . . . . 2121 CITGO Lithoplex
CITGO Lithoplex MP
MP Greases . . . . . . . . . . . . . . . . . . . .
Greases . . . . . . . . . . . . . . . . . . . . 64-65 64-65
CITGO
CITGO CITGARD
CITGARD SynDurance

SynDurance PLUS PLUS Synthetic
Synthetic CITGO
CITGO Lithoplex
Lithoplex PL

PL Greases . . . . . . . . . . . . . . . . . . . . . .
Greases . . . . . . . . . . . . . . . . . . . . . . 66 66
Heavy
Heavy Duty
Duty Engine
Engine Oils . . . . . . . . . . . . . . . . . . . . . . .
Oils . . . . . . . . . . . . . . . . . . . . . . . 22-23
22-23 CITGO Lithoplex
CITGO Lithoplex PM
PM Grease
Grease . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 6767
CITGO
CITGO CITGARD
CITGARD CNG/LNG

CNG/LNG Engine Engine Oil Oil . . . . . . . . . . .
. . . . . . . . . . . 24-25
24-25 CITGO
CITGO Lithoplex
Lithoplex PTG

PTG Grease
Grease . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 6868
CITGO
CITGO CITGEAR
CITGEAR HD HD Synthetic
Synthetic Gear Gear Lubricants . . . . .
Lubricants . . . . . 31-32 31-32 CITGO
CITGO Lithoplex
Lithoplex Red
Red MP MP Grease
Grease . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 6969
CITGO
CITGO CITGEAR
CITGEAR MGW-OGL
MGW-OGL . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 118
118 CITGO
CITGO Lithoplex
Lithoplex RT
RT Greases
Greases . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 7070
CITGO CITGEAR OGL-A . . . . . . . . . . . . . . . . . . . . . . . . . 119
CITGO CITGEAR OGL-A . . . . . . . . . . . . . . . . . . . . . . . . . 119 CITGO Lithoplex ST Greases . . . . . . . . . . . . . . . . . . . . . 71
CITGO Lithoplex ST Greases . . . . . . . . . . . . . . . . . . . . . 71
CITGO
CITGO CITGEAR
CITGEAR Standard
Standard XD XD . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 30
30 CITGO
CITGO MGX
MGX Fluid
Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
130
Index

CITGO CITGEAR Synthetic EP Lubricants . . . . . . . 120-121


CITGO CITGEAR Synthetic EP Lubricants . . . . . . . 120-121 CITGO Multi-Purpose
CITGO Multi-Purpose Air-Cooled
Air-Cooled 2-Cycle 2-Cycle EngineEngine Oil Oil . . . .
. . . . 26
26
CITGO
CITGO CITGEAR
CITGEAR Synthetic
Synthetic HT HT Lubricants
Lubricants . . . . . . .
. . . . . . . 122-123
122-123 CITGO
CITGO North
North Star
Star Refrigeration

Refrigeration Oils . . . . . . . . . . . . . . . .
Oils . . . . . . . . . . . . . . . . 183183
CITGO CITGEAR Synthetic PAG Gear Fluids . . . . . . . . 124
CITGO CITGEAR Synthetic PAG Gear Fluids . . . . . . . . 124 CITGO
CITGO North
North Star
Star Refrigeration
Refrigeration Oil
Oil 68 . . . . . . . . . . . . . .
68 . . . . . . . . . . . . . . 184 184
CITGO
CITGO CITGEAR
CITGEAR WT WT 320320 . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 125
125 CITGO
CITGO OverDrive
OverDrive HD HD Grease . . . . . . . . . . . . . . . . . . . 72-73

Grease . . . . . . . . . . . . . . . . . . . 72-73
CITGO CITGEAR XCO Oils . . . . . . . . . . . . . . . . . . . . . . 126 CITGO Pacemaker Oils . . . . . . . . . . . . . . . . . . . . . . 113-114

CITGO CITGEAR XCO Oils . . . . . . . . . . . . . . . . . . . . . . 126 CITGO Pacemaker Oils . . . . . . . . . . . . . . . . . . . . . . 113-114
CITGO CompKleen Synthetic Cleaner . . . . . . . . . . . . . . 193

CITGO Pacemaker 1640 AE . . . . . . . . . . . . . . . . . . . . . . 155
CITGO CompKleen Synthetic Cleaner . . . . . . . . . . . . . . 193 CITGO Pacemaker 1640 AE . . . . . . . . . . . . . . . . . . . . . . 155
CITGO Compressor Oil 35LP and 45LP . . . . . . . . . . . . . 194 CITGO Pacemaker SD Oils . . . . . . . . . . . . . . . . . . . 131-132
CITGO Compressor Oil 35LP and 45LP . . . . . . . . . . . . . 194 CITGO Pacemaker SD Oils . . . . . . . . . . . . . . . . . . . 131-132
CITGO Compressor Oil 7585 . . . . . . . . . . . . . . . . . . . . . 195 CITGO Pacemaker T Oils . . . . . . . . . . . . . . . . . . . . . 115-116
CITGO Compressor Oil 7585 . . . . . . . . . . . . . . . . . . . . . 195 CITGO Pacemaker T Oils . . . . . . . . . . . . . . . . . . . . . 115-116
CITGO CompressorGard DE . . . . . . . . . . . . . . . . . . 196-197 CITGO Pacemaker Gas Engine Oil 1000 Series . . . . 156-157
CITGO CompressorGard DE . . . . . . . . . . . . . . . . . . 196-197 CITGO Pacemaker Gas Engine Oil 1000 Series . . . . 156-157
CITGO CompressorGard GE . . . . . . . . . . . . . . . . . . . . . 198 CITGO Pacemaker Gas Engine Oil 1200 Series . . . . 158-159
CITGO CompressorGard GE . . . . . . . . . . . . . . . . . . . . . 198 CITGO Pacemaker Gas Engine Oil 1200 Series . . . . 158-159
CITGO CompressorGard H Series . . . . . . . . . . . . . . . . . 199 CITGO Pacemaker Gas Engine Oil 1600 Series . . . . 160-161
CITGO CompressorGard H Series . . . . . . . . . . . . . . . . . 199 CITGO Pacemaker Gas Engine Oil 1600 Series . . . . 160-161
CITGO CompressorGard IPG . . . . . . . . . . . . . . . . . . . . 200 CITGO Pacemaker Gas Engine Oil 1700 Series . . . . 162-163
CITGO CompressorGard IPG . . . . . . . . . . . . . . . . . . . . 200 CITGO Pacemaker Gas Engine Oil 1700 Series . . . . 162-163
CITGO CompressorGard PAG . . . . . . . . . . . . . . . . . . . . 201 CITGO Pacemaker Gas Engine Oil
CITGO CompressorGard PAG . . . . . . . . . . . . . . . . . . . . 201 CITGO Pacemaker Gas Engine Oil
CITGO CompressorGard PAO . . . . . . . . . . . . . . . . . 202-203 1900 XL Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 164-166
CITGO CompressorGard PAO . . . . . . . . . . . . . . . . . 202-203 1900 XL Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 164-166
Continued

276
PRODUCT INDEX(Contd.)
CITGO Pacemaker Gas Engine Oil 700 Series . . . . 167-168

CITGO TRANSGARD ATF, Type F . . . . . . . . . . . . . . . . . 48
CITGO Pacemaker Gas Engine Oil 935 . . . . . . . . . . . . 169 CITGO TRANSGARD ATF+4 . . . . . . . . . . . . . . . . . . . . . 49
CITGO Pacemaker Gas Engine Oil 15SL . . . . . . . . . . . . 170 CITGO TRANSGARD CVT Fluid . . . . . . . . . . . . . . . . . . . 50
CITGO Pacemaker LFG LA 40 Gas Engine Oil . . . . . . . 171 CITGO TRANSGARD DEXRON-VI ATF . . . . . . . . . . . . 51
CITGO Pacemaker HV Oils . . . . . . . . . . . . . . . . . . . . . . 185 CITGO TRANSGARD Heavy-Duty
CITGO Pacemaker ST-32 . . . . . . . . . . . . . . . . . . . . . . . . 208 Transmission Fluids . . . . . . . . . . . . . . . . . . . . . . . . . 52-53
CITGO PackGard 220 . . . . . . . . . . . . . . . . . . . . . . . . . . . 186 CITGO TRANSGARD Multi-Purpose ATF . . . . . . . . . . . . 54
CITGO Power Steering Fluid with Stop Leak . . . . . . . . . . . 43 CITGO TRANSGARD Multi-Vehicle
CITGO Premium Lithium EP Greases . . . . . . . . . . . . . . 74-75 High-Viscosity ATF . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56
CITGO Premium (LS) Gear Oil . . . . . . . . . . . . . . . . . . . 35-36 CITGO TRANSGARD Synthetic Multi-Vehicle
CITGO Premium Gear Oils (MP) . . . . . . . . . . . . . . . . . . 37-38 Low-Viscosity ATF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
CITGO Press Oil 68 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 CITGO TRANSGARD Tractor Hydraulic Fluids . . . . . . 58-59
CITGO Procoil Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 CITGO Trukut GP 205 . . . . . . . . . . . . . . . . . . . . . . . . 150-151
CITGO QuatraSyn Synthetic Transmission Fluid . . . . . 44-45 CITGO Trukut HD 220 . . . . . . . . . . . . . . . . . . . . . . . . 152-153
CITGO Quenchol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 CITGO Tul-Kut Oil Base Cutting Oil Concentrate . . . . . 154
CITGO Railroad Car Journal Oil No. 9 . . . . . . . . . . . . . . 172 CITGO UltraLife CSEP 5M Grease . . . . . . . . . . . . . . . . 83-84
CITGO Railroad Curve Grease . . . . . . . . . . . . . . . . . . . . . 76 CITGO Wireline Lubricants . . . . . . . . . . . . . . . . . . . . . . . . 192
CITGO RD-969 and RD-1069 Diesel Engine Oils . . . 173-174
CITGO RD-2069 LE Diesel Engine Oil . . . . . . . . . . . . 175-176
CITGO Regular Gear Oil . . . . . . . . . . . . . . . . . . . . . . . . . . 39
CITGO Rock Drill Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
CITGO RUST-O-LENE LT . . . . . . . . . . . . . . . . . . . . . . . 148
CITGO RUST-O-LENE ST . . . . . . . . . . . . . . . . . . . . . . . 149
CITGO SATISOL Concrete Form Release . . . . . . . . . . . 189
CITGO Sentry Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
CITGO Sliderite Oils . . . . . . . . . . . . . . . . . . . . . . . . . 190-191
CITGO SUPERGARD European Formula Motor Oils . . . . . 1
CITGO SUPERGARD Full Synthetic Motor Oils . . . . . . . 2-3
CITGO SUPERGARD Motor Oils . . . . . . . . . . . . . . . . . . . 4-5
CITGO SUPERGARD Synthetic Blend
SAE 10W-40 Motor Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
CITGO SUPERGARD Synthetic INTL Motor Oils . . . . . . . 7-8
CITGO SUPERGARD UltraLife Motor Oils . . . . . . . . . . . . . 9
CITGO SUPERGARD Air-Cooled 2-Cycle Engine Oil . . . 27
CITGO SUPERGARD Marine Plus Grease . . . . . . . . . . . 77

Index
CITGO SUPERGARD Marine Plus
Two-Cycle Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CITGO SUPERGARD Sea and Snow
2-Cycle Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
CITGO SUPERGARD Marine Plus Lower Unit
Gear Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
CITGO SynDurance Premium Synthetic
460 Grease #00 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
CITGO SynDurance Premium Synthetic
460 Greases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79-80
CITGO SynDurance ST Synthetic Greases . . . . . . . . . 81-82
CITGO SynDurance Synthetic All Seasons
Heavy-Duty Transmission Fluid . . . . . . . . . . . . . . . . . . . 46
CITGO Synthetic Gear Lubricants . . . . . . . . . . . . . . . . . 33-34
CITGO TRANSGARD ATF, MERCON V . . . . . . . . . . . . 47

277
Index

278
Index

279
www.citgolubes.com
CITGO Petroleum Corporation
P.O. Box 4689
Houston, TX 77210-4689
800-248-4684

2017 CITGO Petroleum Corporation. All rights reserved.


The CITGO logo and all related marks are registered trademarks of
CITGO Petroleum Corporation.

161020-001

You might also like