You are on page 1of 2

Ball Valve Part Number

2 inch Pedestal Mounted HTE900212

The unit comprises of a 2in spindle, which in turn are Design Features
ball valve and an actuator located by phosphor bronze
mounting pedestal. bearings. Sealing of the The pedestal valve can be
The ball valve housing spherical ball is achieved by used with Eaton's single or
consists of a cast aluminium two balanced PTFE seats, twin motor actuators.
alloy body, with two which are energised by a
aluminium end retainers held wave spring and sealed The valve is fitted with
in place with six bolts. The by an O-ring either side of thermal relief pill set at
interface between the valve the ball. Operation of the 12 - 20psi.
body and end connectors spherical ball is via a stainless A variation of the valve can
is sealed by O-rings. The steel drive spindle, which be supplied with thermal
mounting flange incorporates passes through the body and relief up to 80psi to suit
four studs to allow is sealed by double O-ring aircraft requirements.
attachment to the actuator seals. This spindle passes
mounting pedestal and two through the fuel tank wall
threaded holes allow the and interfaces to the drive
flange to be bolted to the fuel assembly.
tank wall. The drive spindle The actuator mounting
protrudes from the unit and pedestal is positioned on the
interfaces with the actuator outside of the fuel tank wall
mounting pedestal. and attached to the valve
Internally, the valve consists via four bolts from the body
of an aluminium alloy assembly and is designed to
spherical ball mounted on be used with an Eaton 90
the drive spindle and bottom actuator.
Specification
2in L.P. Valve . . . . . . . . . . . . . . . . . . Part No. HTE900212
Space Envelope . . . . . . . . . . . . . . . . 124 x 105 x 170mm
. . . . . . . . . . . . . . . . . . . . . . . . . . . . (4.8 x 4.1 x 6.7in)
Operating Pressure . . . . . . . . . . . . 0 - 60psi (0 - 414kPa)
Proof Pressure . . . . . . . . . . . . . . . . . 150psi (1035kPa)
Ultimate Pressure . . . . . . . . . . . . . . 360psi (2482kPa)
Torque (Valve Only) . . . . . . . . . . . . . 25lbfin @ 75psig
Leakage (External) . . . . . . . . . . . . . Nil at 150psi
Leakage (Internal) . . . . . . . . . . . . . . Nil at 5 - 75psi
Bonding: . . . . . . . . . . . . . . . . . . . . . 10mW
Dry Weight . . . . . . . . . . . . . . . . . . . 1.073kg (2.29lb)
Temperature Range . . . . . . . . . . . . . -55C to 70C (-67F to 158F)
Altitude . . . . . . . . . . . . . . . . . . . . . . -2,000 to 41,450ft
Endurance . . . . . . . . . . . . . . . . . . . 50,000 cycles
MTBF: . . . . . . . . . . . . . . . . . . . . . . . 250,000 hours
MTBUR: . . . . . . . . . . . . . . . . . . . . . . 80% of MTBF
Operating Media . . . . . . . . . . . . . . . Fuel

Dimensions in mm (in)

Eaton Aerospace Limited Eaton Aerospace Limited Eaton Eaton


Aerospace Group Aerospace Group Aerospace Group Aerospace Group
Fuel Systems Division Fuel Systems Division Fuel Systems Division Fuel Systems Division
Abbey Park, Southampton Road Pathfields Business Park 23555 Euclid Avenue 9650 Jeronimo Road
Titchfield, Fareham Station Road, South Molton Cleveland, Ohio 44117 Irvine, California 92618
Hampshire, PO14 4QA Devon, EX36 3DW USA USA
UK UK Tel: (216) 692 6000 Tel: (949) 452 9500
Tel: +44 (0)1329 853000 Tel: +44 (0)1769 573371 Fax: (216) 692 6331 Fax: (949) 452 9991
Fax: +44 (0)1329 853797 Fax: +44 (0)1769 572755
www.eaton.com/aerospace

2011 Eaton Corporation


All Rights Reserved
Printed in USA
Form No. DS600-27B
June 2011

You might also like